include/configs/MPC837XEMDS.h

   1 /*
   2  * Copyright (C) 2007 Freescale Semiconductor, Inc.
   3  * Dave Liu <daveliu@freescale.com>
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 #ifndef __CONFIG_H
   9 #define __CONFIG_H
  10
  11 #define CONFIG_SYS_GENERIC_BOARD
  12 #define CONFIG_DISPLAY_BOARDINFO
  13
  14 /*
  15  * High Level Configuration Options
  16  */
  17 #define CONFIG_E300             1 /* E300 family */
  18 #define CONFIG_MPC837x          1 /* MPC837x CPU specific */
  19 #define CONFIG_MPC837XEMDS      1 /* MPC837XEMDS board specific */
  20
  21 #define CONFIG_SYS_TEXT_BASE    0xFE000000
  22
  23 /*
  24  * System Clock Setup
  25  */
  26 #ifdef CONFIG_PCISLAVE
  27 #define CONFIG_83XX_PCICLK      66000000 /* in HZ */
  28 #else
  29 #define CONFIG_83XX_CLKIN       66000000 /* in Hz */
  30 #endif
  31
  32 #ifndef CONFIG_SYS_CLK_FREQ
  33 #define CONFIG_SYS_CLK_FREQ     66000000
  34 #endif
  35
  36 /*
  37  * Hardware Reset Configuration Word
  38  * if CLKIN is 66MHz, then
  39  * CSB = 396MHz, CORE = 594MHz, DDRC = 396MHz, LBC = 396MHz
  40  */
  41 #define CONFIG_SYS_HRCW_LOW (\
  42         HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
  43         HRCWL_DDR_TO_SCB_CLK_1X1 |\
  44         HRCWL_SVCOD_DIV_2 |\
  45         HRCWL_CSB_TO_CLKIN_6X1 |\
  46         HRCWL_CORE_TO_CSB_1_5X1)
  47
  48 #ifdef CONFIG_PCISLAVE
  49 #define CONFIG_SYS_HRCW_HIGH (\
  50         HRCWH_PCI_AGENT |\
  51         HRCWH_PCI1_ARBITER_DISABLE |\
  52         HRCWH_CORE_ENABLE |\
  53         HRCWH_FROM_0XFFF00100 |\
  54         HRCWH_BOOTSEQ_DISABLE |\
  55         HRCWH_SW_WATCHDOG_DISABLE |\
  56         HRCWH_ROM_LOC_LOCAL_16BIT |\
  57         HRCWH_RL_EXT_LEGACY |\
  58         HRCWH_TSEC1M_IN_RGMII |\
  59         HRCWH_TSEC2M_IN_RGMII |\
  60         HRCWH_BIG_ENDIAN |\
  61         HRCWH_LDP_CLEAR)
  62 #else
  63 #define CONFIG_SYS_HRCW_HIGH (\
  64         HRCWH_PCI_HOST |\
  65         HRCWH_PCI1_ARBITER_ENABLE |\
  66         HRCWH_CORE_ENABLE |\
  67         HRCWH_FROM_0X00000100 |\
  68         HRCWH_BOOTSEQ_DISABLE |\
  69         HRCWH_SW_WATCHDOG_DISABLE |\
  70         HRCWH_ROM_LOC_LOCAL_16BIT |\
  71         HRCWH_RL_EXT_LEGACY |\
  72         HRCWH_TSEC1M_IN_RGMII |\
  73         HRCWH_TSEC2M_IN_RGMII |\
  74         HRCWH_BIG_ENDIAN |\
  75         HRCWH_LDP_CLEAR)
  76 #endif
  77
  78 /* Arbiter Configuration Register */
  79 #define CONFIG_SYS_ACR_PIPE_DEP 3       /* Arbiter pipeline depth is 4 */
  80 #define CONFIG_SYS_ACR_RPTCNT   3       /* Arbiter repeat count is 4 */
  81
  82 /* System Priority Control Register */
  83 #define CONFIG_SYS_SPCR_TSECEP  3 /* eTSEC1/2 emergency has highest priority */
  84
  85 /*
  86  * IP blocks clock configuration
  87  */
  88 #define CONFIG_SYS_SCCR_TSEC1CM 1       /* CSB:eTSEC1 = 1:1 */
  89 #define CONFIG_SYS_SCCR_TSEC2CM 1       /* CSB:eTSEC2 = 1:1 */
  90 #define CONFIG_SYS_SCCR_SATACM  SCCR_SATACM_2   /* CSB:SATA[0:3] = 2:1 */
  91
  92 /*
  93  * System IO Config
  94  */
  95 #define CONFIG_SYS_SICRH                0x00000000
  96 #define CONFIG_SYS_SICRL                0x00000000
  97
  98 /*
  99  * Output Buffer Impedance
 100  */
 101 #define CONFIG_SYS_OBIR         0x31100000
 102
 103 #define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */
 104 #define CONFIG_BOARD_EARLY_INIT_R
 105 #define CONFIG_HWCONFIG
 106
 107 /*
 108  * IMMR new address
 109  */
 110 #define CONFIG_SYS_IMMR         0xE0000000
 111
 112 /*
 113  * DDR Setup
 114  */
 115 #define CONFIG_SYS_DDR_BASE             0x00000000 /* DDR is system memory */
 116 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_BASE
 117 #define CONFIG_SYS_DDR_SDRAM_BASE       CONFIG_SYS_DDR_BASE
 118 #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL   DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
 119 #define CONFIG_SYS_83XX_DDR_USES_CS0
 120 #define CONFIG_SYS_DDRCDR_VALUE         (DDRCDR_DHC_EN \
 121                                         | DDRCDR_ODT \
 122                                         | DDRCDR_Q_DRN)
 123                                         /* 0x80080001 */ /* ODT 150ohm on SoC */
 124
 125 #undef CONFIG_DDR_ECC           /* support DDR ECC function */
 126 #undef CONFIG_DDR_ECC_CMD       /* Use DDR ECC user commands */
 127
 128 #define CONFIG_SPD_EEPROM       /* Use SPD EEPROM for DDR setup */
 129 #define CONFIG_NEVER_ASSERT_ODT_TO_CPU /* Never assert ODT to internal IOs */
 130
 131 #if defined(CONFIG_SPD_EEPROM)
 132 #define SPD_EEPROM_ADDRESS      0x51 /* I2C address of DDR SODIMM SPD */
 133 #else
 134 /*
 135  * Manually set up DDR parameters
 136  * WHITE ELECTRONIC DESIGNS - W3HG64M72EEU403PD4 SO-DIMM
 137  * consist of nine chips from SAMSUNG K4T51083QE-ZC(L)D5
 138  */
 139 #define CONFIG_SYS_DDR_SIZE             512 /* MB */
 140 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000001f
 141 #define CONFIG_SYS_DDR_CS0_CONFIG       (CSCONFIG_EN \
 142                         | CSCONFIG_ODT_RD_NEVER  /* ODT_RD to none */ \
 143                         | CSCONFIG_ODT_WR_ONLY_CURRENT  /* ODT_WR to CSn */ \
 144                         | CSCONFIG_ROW_BIT_14 \
 145                         | CSCONFIG_COL_BIT_10)
 146                         /* 0x80010202 */
 147 #define CONFIG_SYS_DDR_TIMING_3 0x00000000
 148 #define CONFIG_SYS_DDR_TIMING_0 ((0 << TIMING_CFG0_RWT_SHIFT) \
 149                                 | (0 << TIMING_CFG0_WRT_SHIFT) \
 150                                 | (0 << TIMING_CFG0_RRT_SHIFT) \
 151                                 | (0 << TIMING_CFG0_WWT_SHIFT) \
 152                                 | (6 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) \
 153                                 | (2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) \
 154                                 | (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) \
 155                                 | (2 << TIMING_CFG0_MRS_CYC_SHIFT))
 156                                 /* 0x00620802 */
 157 #define CONFIG_SYS_DDR_TIMING_1 ((3 << TIMING_CFG1_PRETOACT_SHIFT) \
 158                                 | (9 << TIMING_CFG1_ACTTOPRE_SHIFT) \
 159                                 | (3 << TIMING_CFG1_ACTTORW_SHIFT) \
 160                                 | (5 << TIMING_CFG1_CASLAT_SHIFT) \
 161                                 | (13 << TIMING_CFG1_REFREC_SHIFT) \
 162                                 | (3 << TIMING_CFG1_WRREC_SHIFT) \
 163                                 | (2 << TIMING_CFG1_ACTTOACT_SHIFT) \
 164                                 | (2 << TIMING_CFG1_WRTORD_SHIFT))
 165                                 /* 0x3935d322 */
 166 #define CONFIG_SYS_DDR_TIMING_2 ((1 << TIMING_CFG2_ADD_LAT_SHIFT) \
 167                                 | (6 << TIMING_CFG2_CPO_SHIFT) \
 168                                 | (2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) \
 169                                 | (4 << TIMING_CFG2_RD_TO_PRE_SHIFT) \
 170                                 | (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) \
 171                                 | (3 << TIMING_CFG2_CKE_PLS_SHIFT) \
 172                                 | (8 << TIMING_CFG2_FOUR_ACT_SHIFT))
 173                                 /* 0x131088c8 */
 174 #define CONFIG_SYS_DDR_INTERVAL ((0x03E0 << SDRAM_INTERVAL_REFINT_SHIFT) \
 175                                 | (0x0100 << SDRAM_INTERVAL_BSTOPRE_SHIFT))
 176                                 /* 0x03E00100 */
 177 #define CONFIG_SYS_DDR_SDRAM_CFG        0x43000000
 178 #define CONFIG_SYS_DDR_SDRAM_CFG2       0x00001000 /* 1 posted refresh */
 179 #define CONFIG_SYS_DDR_MODE     ((0x0448 << SDRAM_MODE_ESD_SHIFT) \
 180                                 | (0x1432 << SDRAM_MODE_SD_SHIFT))
 181                                 /* ODT 150ohm CL=3, AL=1 on SDRAM */
 182 #define CONFIG_SYS_DDR_MODE2    0x00000000
 183 #endif
 184
 185 /*
 186  * Memory test
 187  */
 188 #undef CONFIG_SYS_DRAM_TEST             /* memory test, takes time */
 189 #define CONFIG_SYS_MEMTEST_START        0x00040000 /* memtest region */
 190 #define CONFIG_SYS_MEMTEST_END          0x00140000
 191
 192 /*
 193  * The reserved memory
 194  */
 195 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
 196
 197 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 198 #define CONFIG_SYS_RAMBOOT
 199 #else
 200 #undef CONFIG_SYS_RAMBOOT
 201 #endif
 202
 203 /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
 204 #define CONFIG_SYS_MONITOR_LEN  (384 * 1024) /* Reserve 384 kB for Mon */
 205 #define CONFIG_SYS_MALLOC_LEN   (512 * 1024) /* Reserved for malloc */
 206
 207 /*
 208  * Initial RAM Base Address Setup
 209  */
 210 #define CONFIG_SYS_INIT_RAM_LOCK        1
 211 #define CONFIG_SYS_INIT_RAM_ADDR        0xE6000000 /* Initial RAM address */
 212 #define CONFIG_SYS_INIT_RAM_SIZE        0x1000 /* Size of used area in RAM */
 213 #define CONFIG_SYS_GBL_DATA_OFFSET      \
 214                         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 215
 216 /*
 217  * Local Bus Configuration & Clock Setup
 218  */
 219 #define CONFIG_SYS_LCRR_DBYP    LCRR_DBYP
 220 #define CONFIG_SYS_LCRR_CLKDIV  LCRR_CLKDIV_8
 221 #define CONFIG_SYS_LBC_LBCR             0x00000000
 222 #define CONFIG_FSL_ELBC         1
 223
 224 /*
 225  * FLASH on the Local Bus
 226  */
 227 #define CONFIG_SYS_FLASH_CFI    /* use the Common Flash Interface */
 228 #define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */
 229 #define CONFIG_SYS_FLASH_BASE   0xFE000000 /* FLASH base address */
 230 #define CONFIG_SYS_FLASH_SIZE   32 /* max FLASH size is 32M */
 231 #define CONFIG_SYS_FLASH_PROTECTION     1       /* Use h/w Flash protection. */
 232
 233                                         /* Window base at flash base */
 234 #define CONFIG_SYS_LBLAWBAR0_PRELIM     CONFIG_SYS_FLASH_BASE
 235 #define CONFIG_SYS_LBLAWAR0_PRELIM      (LBLAWAR_EN | LBLAWAR_32MB)
 236
 237 #define CONFIG_SYS_BR0_PRELIM   (CONFIG_SYS_FLASH_BASE \
 238                                 | BR_PS_16      /* 16 bit port */ \
 239                                 | BR_MS_GPCM    /* MSEL = GPCM */ \
 240                                 | BR_V)         /* valid */
 241 #define CONFIG_SYS_OR0_PRELIM   (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \
 242                                 | OR_UPM_XAM \
 243                                 | OR_GPCM_CSNT \
 244                                 | OR_GPCM_ACS_DIV2 \
 245                                 | OR_GPCM_XACS \
 246                                 | OR_GPCM_SCY_15 \
 247                                 | OR_GPCM_TRLX_SET \
 248                                 | OR_GPCM_EHTR_SET \
 249                                 | OR_GPCM_EAD)
 250                                 /* 0xFE000FF7 */
 251
 252 #define CONFIG_SYS_MAX_FLASH_BANKS      1 /* number of banks */
 253 #define CONFIG_SYS_MAX_FLASH_SECT       256 /* max sectors per device */
 254
 255 #undef CONFIG_SYS_FLASH_CHECKSUM
 256 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000 /* Flash Erase Timeout (ms) */
 257 #define CONFIG_SYS_FLASH_WRITE_TOUT     500 /* Flash Write Timeout (ms) */
 258
 259 /*
 260  * BCSR on the Local Bus
 261  */
 262 #define CONFIG_SYS_BCSR         0xF8000000
 263                                         /* Access window base at BCSR base */
 264 #define CONFIG_SYS_LBLAWBAR1_PRELIM     CONFIG_SYS_BCSR
 265 #define CONFIG_SYS_LBLAWAR1_PRELIM      (LBLAWAR_EN | LBLAWAR_32KB)
 266
 267 #define CONFIG_SYS_BR1_PRELIM   (CONFIG_SYS_BCSR \
 268                                 | BR_PS_8 \
 269                                 | BR_MS_GPCM \
 270                                 | BR_V)
 271                                 /* 0xF8000801 */
 272 #define CONFIG_SYS_OR1_PRELIM   (OR_AM_32KB \
 273                                 | OR_GPCM_XAM \
 274                                 | OR_GPCM_CSNT \
 275                                 | OR_GPCM_XACS \
 276                                 | OR_GPCM_SCY_15 \
 277                                 | OR_GPCM_TRLX_SET \
 278                                 | OR_GPCM_EHTR_SET \
 279                                 | OR_GPCM_EAD)
 280                                 /* 0xFFFFE9F7 */
 281
 282 /*
 283  * NAND Flash on the Local Bus
 284  */
 285 #define CONFIG_CMD_NAND         1
 286 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 287 #define CONFIG_NAND_FSL_ELBC    1
 288
 289 #define CONFIG_SYS_NAND_BASE    0xE0600000
 290 #define CONFIG_SYS_BR3_PRELIM   (CONFIG_SYS_NAND_BASE \
 291                                 | BR_DECC_CHK_GEN       /* Use HW ECC */ \
 292                                 | BR_PS_8               /* 8 bit port */ \
 293                                 | BR_MS_FCM             /* MSEL = FCM */ \
 294                                 | BR_V)                 /* valid */
 295 #define CONFIG_SYS_OR3_PRELIM   (OR_AM_32KB \
 296                                 | OR_FCM_BCTLD \
 297                                 | OR_FCM_CST \
 298                                 | OR_FCM_CHT \
 299                                 | OR_FCM_SCY_1 \
 300                                 | OR_FCM_RST \
 301                                 | OR_FCM_TRLX \
 302                                 | OR_FCM_EHTR)
 303                                 /* 0xFFFF919E */
 304
 305 #define CONFIG_SYS_LBLAWBAR3_PRELIM     CONFIG_SYS_NAND_BASE
 306 #define CONFIG_SYS_LBLAWAR3_PRELIM      (LBLAWAR_EN | LBLAWAR_32KB)
 307
 308 /*
 309  * Serial Port
 310  */
 311 #define CONFIG_CONS_INDEX       1
 312 #define CONFIG_SYS_NS16550
 313 #define CONFIG_SYS_NS16550_SERIAL
 314 #define CONFIG_SYS_NS16550_REG_SIZE     1
 315 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 316
 317 #define CONFIG_SYS_BAUDRATE_TABLE  \
 318                 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 319
 320 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500)
 321 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600)
 322
 323 /* Use the HUSH parser */
 324 #define CONFIG_SYS_HUSH_PARSER
 325
 326 /* Pass open firmware flat tree */
 327 #define CONFIG_OF_LIBFDT        1
 328 #define CONFIG_OF_BOARD_SETUP   1
 329 #define CONFIG_OF_STDOUT_VIA_ALIAS      1
 330
 331 /* I2C */
 332 #define CONFIG_SYS_I2C
 333 #define CONFIG_SYS_I2C_FSL
 334 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 335 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 336 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 337 #define CONFIG_SYS_I2C_NOPROBES         { {0, 0x51} }
 338
 339 /*
 340  * Config on-board RTC
 341  */
 342 #define CONFIG_RTC_DS1374       /* use ds1374 rtc via i2c */
 343 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 /* at address 0x68 */
 344
 345 /*
 346  * General PCI
 347  * Addresses are mapped 1-1.
 348  */
 349 #define CONFIG_SYS_PCI_MEM_BASE         0x80000000
 350 #define CONFIG_SYS_PCI_MEM_PHYS         CONFIG_SYS_PCI_MEM_BASE
 351 #define CONFIG_SYS_PCI_MEM_SIZE         0x10000000 /* 256M */
 352 #define CONFIG_SYS_PCI_MMIO_BASE        0x90000000
 353 #define CONFIG_SYS_PCI_MMIO_PHYS        CONFIG_SYS_PCI_MMIO_BASE
 354 #define CONFIG_SYS_PCI_MMIO_SIZE        0x10000000 /* 256M */
 355 #define CONFIG_SYS_PCI_IO_BASE          0x00000000
 356 #define CONFIG_SYS_PCI_IO_PHYS          0xE0300000
 357 #define CONFIG_SYS_PCI_IO_SIZE          0x100000 /* 1M */
 358
 359 #define CONFIG_SYS_PCI_SLV_MEM_LOCAL    CONFIG_SYS_SDRAM_BASE
 360 #define CONFIG_SYS_PCI_SLV_MEM_BUS      0x00000000
 361 #define CONFIG_SYS_PCI_SLV_MEM_SIZE     0x80000000
 362
 363 #define CONFIG_SYS_PCIE1_BASE           0xA0000000
 364 #define CONFIG_SYS_PCIE1_CFG_BASE       0xA0000000
 365 #define CONFIG_SYS_PCIE1_CFG_SIZE       0x08000000
 366 #define CONFIG_SYS_PCIE1_MEM_BASE       0xA8000000
 367 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xA8000000
 368 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000
 369 #define CONFIG_SYS_PCIE1_IO_BASE        0x00000000
 370 #define CONFIG_SYS_PCIE1_IO_PHYS        0xB8000000
 371 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00800000
 372
 373 #define CONFIG_SYS_PCIE2_BASE           0xC0000000
 374 #define CONFIG_SYS_PCIE2_CFG_BASE       0xC0000000
 375 #define CONFIG_SYS_PCIE2_CFG_SIZE       0x08000000
 376 #define CONFIG_SYS_PCIE2_MEM_BASE       0xC8000000
 377 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xC8000000
 378 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000
 379 #define CONFIG_SYS_PCIE2_IO_BASE        0x00000000
 380 #define CONFIG_SYS_PCIE2_IO_PHYS        0xD8000000
 381 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00800000
 382
 383 #ifdef CONFIG_PCI
 384 #define CONFIG_PCI_INDIRECT_BRIDGE
 385 #ifndef __ASSEMBLY__
 386 extern int board_pci_host_broken(void);
 387 #endif
 388 #define CONFIG_PCIE
 389 #define CONFIG_PQ_MDS_PIB       1 /* PQ MDS Platform IO Board */
 390
 391 #define CONFIG_HAS_FSL_DR_USB   1 /* fixup device tree for the DR USB */
 392 #define CONFIG_CMD_USB
 393 #define CONFIG_USB_STORAGE
 394 #define CONFIG_USB_EHCI
 395 #define CONFIG_USB_EHCI_FSL
 396 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 397
 398 #define CONFIG_PCI_PNP          /* do pci plug-and-play */
 399
 400 #undef CONFIG_EEPRO100
 401 #undef CONFIG_PCI_SCAN_SHOW     /* show pci devices on startup */
 402 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957   /* Freescale */
 403 #endif /* CONFIG_PCI */
 404
 405 /*
 406  * TSEC
 407  */
 408 #define CONFIG_TSEC_ENET        /* TSEC ethernet support */
 409 #define CONFIG_SYS_TSEC1_OFFSET 0x24000
 410 #define CONFIG_SYS_TSEC1        (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET)
 411 #define CONFIG_SYS_TSEC2_OFFSET 0x25000
 412 #define CONFIG_SYS_TSEC2        (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC2_OFFSET)
 413
 414 /*
 415  * TSEC ethernet configuration
 416  */
 417 #define CONFIG_MII              1 /* MII PHY management */
 418 #define CONFIG_TSEC1            1
 419 #define CONFIG_TSEC1_NAME       "eTSEC0"
 420 #define CONFIG_TSEC2            1
 421 #define CONFIG_TSEC2_NAME       "eTSEC1"
 422 #define TSEC1_PHY_ADDR          2
 423 #define TSEC2_PHY_ADDR          3
 424 #define TSEC1_PHY_ADDR_SGMII    8
 425 #define TSEC2_PHY_ADDR_SGMII    4
 426 #define TSEC1_PHYIDX            0
 427 #define TSEC2_PHYIDX            0
 428 #define TSEC1_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 429 #define TSEC2_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 430
 431 /* Options are: TSEC[0-1] */
 432 #define CONFIG_ETHPRIME         "eTSEC1"
 433
 434 /* SERDES */
 435 #define CONFIG_FSL_SERDES
 436 #define CONFIG_FSL_SERDES1      0xe3000
 437 #define CONFIG_FSL_SERDES2      0xe3100
 438
 439 /*
 440  * SATA
 441  */
 442 #define CONFIG_LIBATA
 443 #define CONFIG_FSL_SATA
 444
 445 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 446 #define CONFIG_SATA1
 447 #define CONFIG_SYS_SATA1_OFFSET 0x18000
 448 #define CONFIG_SYS_SATA1        (CONFIG_SYS_IMMR + CONFIG_SYS_SATA1_OFFSET)
 449 #define CONFIG_SYS_SATA1_FLAGS  FLAGS_DMA
 450 #define CONFIG_SATA2
 451 #define CONFIG_SYS_SATA2_OFFSET 0x19000
 452 #define CONFIG_SYS_SATA2        (CONFIG_SYS_IMMR + CONFIG_SYS_SATA2_OFFSET)
 453 #define CONFIG_SYS_SATA2_FLAGS  FLAGS_DMA
 454
 455 #ifdef CONFIG_FSL_SATA
 456 #define CONFIG_LBA48
 457 #define CONFIG_CMD_SATA
 458 #define CONFIG_DOS_PARTITION
 459 #define CONFIG_CMD_EXT2
 460 #endif
 461
 462 /*
 463  * Environment
 464  */
 465 #ifndef CONFIG_SYS_RAMBOOT
 466         #define CONFIG_ENV_IS_IN_FLASH  1
 467         #define CONFIG_ENV_ADDR         \
 468                         (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
 469         #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K(one sector) for env */
 470         #define CONFIG_ENV_SIZE         0x2000
 471 #else
 472         #define CONFIG_SYS_NO_FLASH     1       /* Flash is not usable now */
 473         #define CONFIG_ENV_IS_NOWHERE   1       /* Store ENV in memory only */
 474         #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - 0x1000)
 475         #define CONFIG_ENV_SIZE         0x2000
 476 #endif
 477
 478 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download */
 479 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change */
 480
 481 /*
 482  * BOOTP options
 483  */
 484 #define CONFIG_BOOTP_BOOTFILESIZE
 485 #define CONFIG_BOOTP_BOOTPATH
 486 #define CONFIG_BOOTP_GATEWAY
 487 #define CONFIG_BOOTP_HOSTNAME
 488
 489
 490 /*
 491  * Command line configuration.
 492  */
 493 #define CONFIG_CMD_PING
 494 #define CONFIG_CMD_I2C
 495 #define CONFIG_CMD_MII
 496 #define CONFIG_CMD_DATE
 497
 498 #if defined(CONFIG_PCI)
 499     #define CONFIG_CMD_PCI
 500 #endif
 501
 502 #define CONFIG_CMDLINE_EDITING  1       /* add command line history */
 503 #define CONFIG_AUTO_COMPLETE            /* add autocompletion support   */
 504
 505 #undef CONFIG_WATCHDOG          /* watchdog disabled */
 506
 507 #define CONFIG_MMC     1
 508
 509 #ifdef CONFIG_MMC
 510 #define CONFIG_FSL_ESDHC
 511 #define CONFIG_FSL_ESDHC_PIN_MUX
 512 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC83xx_ESDHC_ADDR
 513 #define CONFIG_CMD_MMC
 514 #define CONFIG_GENERIC_MMC
 515 #define CONFIG_CMD_EXT2
 516 #define CONFIG_CMD_FAT
 517 #define CONFIG_DOS_PARTITION
 518 #endif
 519
 520 /*
 521  * Miscellaneous configurable options
 522  */
 523 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 524 #define CONFIG_SYS_LOAD_ADDR            0x2000000 /* default load address */
 525
 526 #if defined(CONFIG_CMD_KGDB)
 527         #define CONFIG_SYS_CBSIZE       1024 /* Console I/O Buffer Size */
 528 #else
 529         #define CONFIG_SYS_CBSIZE       256 /* Console I/O Buffer Size */
 530 #endif
 531
 532                                 /* Print Buffer Size */
 533 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 534 #define CONFIG_SYS_MAXARGS      16      /* max number of command args */
 535                                 /* Boot Argument Buffer Size */
 536 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
 537
 538 /*
 539  * For booting Linux, the board info and command line data
 540  * have to be in the first 256 MB of memory, since this is
 541  * the maximum mapped by the Linux kernel during initialization.
 542  */
 543 #define CONFIG_SYS_BOOTMAPSZ    (256 << 20) /* Initial Memory map for Linux */
 544
 545 /*
 546  * Core HID Setup
 547  */
 548 #define CONFIG_SYS_HID0_INIT    0x000000000
 549 #define CONFIG_SYS_HID0_FINAL   (HID0_ENABLE_MACHINE_CHECK | \
 550                                  HID0_ENABLE_INSTRUCTION_CACHE)
 551 #define CONFIG_SYS_HID2         HID2_HBE
 552
 553 /*
 554  * MMU Setup
 555  */
 556 #define CONFIG_HIGH_BATS        1       /* High BATs supported */
 557
 558 /* DDR: cache cacheable */
 559 #define CONFIG_SYS_SDRAM_LOWER          CONFIG_SYS_SDRAM_BASE
 560 #define CONFIG_SYS_SDRAM_UPPER          (CONFIG_SYS_SDRAM_BASE + 0x10000000)
 561
 562 #define CONFIG_SYS_IBAT0L       (CONFIG_SYS_SDRAM_LOWER \
 563                                 | BATL_PP_RW \
 564                                 | BATL_MEMCOHERENCE)
 565 #define CONFIG_SYS_IBAT0U       (CONFIG_SYS_SDRAM_LOWER \
 566                                 | BATU_BL_256M \
 567                                 | BATU_VS \
 568                                 | BATU_VP)
 569 #define CONFIG_SYS_DBAT0L       CONFIG_SYS_IBAT0L
 570 #define CONFIG_SYS_DBAT0U       CONFIG_SYS_IBAT0U
 571
 572 #define CONFIG_SYS_IBAT1L       (CONFIG_SYS_SDRAM_UPPER \
 573                                 | BATL_PP_RW \
 574                                 | BATL_MEMCOHERENCE)
 575 #define CONFIG_SYS_IBAT1U       (CONFIG_SYS_SDRAM_UPPER \
 576                                 | BATU_BL_256M \
 577                                 | BATU_VS \
 578                                 | BATU_VP)
 579 #define CONFIG_SYS_DBAT1L       CONFIG_SYS_IBAT1L
 580 #define CONFIG_SYS_DBAT1U       CONFIG_SYS_IBAT1U
 581
 582 /* IMMRBAR, PCI IO and NAND: cache-inhibit and guarded */
 583 #define CONFIG_SYS_IBAT2L       (CONFIG_SYS_IMMR \
 584                                 | BATL_PP_RW \
 585                                 | BATL_CACHEINHIBIT \
 586                                 | BATL_GUARDEDSTORAGE)
 587 #define CONFIG_SYS_IBAT2U       (CONFIG_SYS_IMMR \
 588                                 | BATU_BL_8M \
 589                                 | BATU_VS \
 590                                 | BATU_VP)
 591 #define CONFIG_SYS_DBAT2L       CONFIG_SYS_IBAT2L
 592 #define CONFIG_SYS_DBAT2U       CONFIG_SYS_IBAT2U
 593
 594 /* BCSR: cache-inhibit and guarded */
 595 #define CONFIG_SYS_IBAT3L       (CONFIG_SYS_BCSR \
 596                                 | BATL_PP_RW \
 597                                 | BATL_CACHEINHIBIT \
 598                                 | BATL_GUARDEDSTORAGE)
 599 #define CONFIG_SYS_IBAT3U       (CONFIG_SYS_BCSR \
 600                                 | BATU_BL_128K \
 601                                 | BATU_VS \
 602                                 | BATU_VP)
 603 #define CONFIG_SYS_DBAT3L       CONFIG_SYS_IBAT3L
 604 #define CONFIG_SYS_DBAT3U       CONFIG_SYS_IBAT3U
 605
 606 /* FLASH: icache cacheable, but dcache-inhibit and guarded */
 607 #define CONFIG_SYS_IBAT4L       (CONFIG_SYS_FLASH_BASE \
 608                                 | BATL_PP_RW \
 609                                 | BATL_MEMCOHERENCE)
 610 #define CONFIG_SYS_IBAT4U       (CONFIG_SYS_FLASH_BASE \
 611                                 | BATU_BL_32M \
 612                                 | BATU_VS \
 613                                 | BATU_VP)
 614 #define CONFIG_SYS_DBAT4L       (CONFIG_SYS_FLASH_BASE \
 615                                 | BATL_PP_RW \
 616                                 | BATL_CACHEINHIBIT \
 617                                 | BATL_GUARDEDSTORAGE)
 618 #define CONFIG_SYS_DBAT4U       CONFIG_SYS_IBAT4U
 619
 620 /* Stack in dcache: cacheable, no memory coherence */
 621 #define CONFIG_SYS_IBAT5L       (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW)
 622 #define CONFIG_SYS_IBAT5U       (CONFIG_SYS_INIT_RAM_ADDR \
 623                                 | BATU_BL_128K \
 624                                 | BATU_VS \
 625                                 | BATU_VP)
 626 #define CONFIG_SYS_DBAT5L       CONFIG_SYS_IBAT5L
 627 #define CONFIG_SYS_DBAT5U       CONFIG_SYS_IBAT5U
 628
 629 #ifdef CONFIG_PCI
 630 /* PCI MEM space: cacheable */
 631 #define CONFIG_SYS_IBAT6L       (CONFIG_SYS_PCI_MEM_PHYS \
 632                                 | BATL_PP_RW \
 633                                 | BATL_MEMCOHERENCE)
 634 #define CONFIG_SYS_IBAT6U       (CONFIG_SYS_PCI_MEM_PHYS \
 635                                 | BATU_BL_256M \
 636                                 | BATU_VS \
 637                                 | BATU_VP)
 638 #define CONFIG_SYS_DBAT6L       CONFIG_SYS_IBAT6L
 639 #define CONFIG_SYS_DBAT6U       CONFIG_SYS_IBAT6U
 640 /* PCI MMIO space: cache-inhibit and guarded */
 641 #define CONFIG_SYS_IBAT7L       (CONFIG_SYS_PCI_MMIO_PHYS \
 642                                 | BATL_PP_RW \
 643                                 | BATL_CACHEINHIBIT \
 644                                 | BATL_GUARDEDSTORAGE)
 645 #define CONFIG_SYS_IBAT7U       (CONFIG_SYS_PCI_MMIO_PHYS \
 646                                 | BATU_BL_256M \
 647                                 | BATU_VS \
 648                                 | BATU_VP)
 649 #define CONFIG_SYS_DBAT7L       CONFIG_SYS_IBAT7L
 650 #define CONFIG_SYS_DBAT7U       CONFIG_SYS_IBAT7U
 651 #else
 652 #define CONFIG_SYS_IBAT6L       (0)
 653 #define CONFIG_SYS_IBAT6U       (0)
 654 #define CONFIG_SYS_IBAT7L       (0)
 655 #define CONFIG_SYS_IBAT7U       (0)
 656 #define CONFIG_SYS_DBAT6L       CONFIG_SYS_IBAT6L
 657 #define CONFIG_SYS_DBAT6U       CONFIG_SYS_IBAT6U
 658 #define CONFIG_SYS_DBAT7L       CONFIG_SYS_IBAT7L
 659 #define CONFIG_SYS_DBAT7U       CONFIG_SYS_IBAT7U
 660 #endif
 661
 662 #if defined(CONFIG_CMD_KGDB)
 663 #define CONFIG_KGDB_BAUDRATE    230400  /* speed of kgdb serial port */
 664 #endif
 665
 666 /*
 667  * Environment Configuration
 668  */
 669
 670 #define CONFIG_ENV_OVERWRITE
 671
 672 #if defined(CONFIG_TSEC_ENET)
 673 #define CONFIG_HAS_ETH0
 674 #define CONFIG_HAS_ETH1
 675 #endif
 676
 677 #define CONFIG_BAUDRATE 115200
 678
 679 #define CONFIG_LOADADDR 800000  /* default location for tftp and bootm */
 680
 681 #define CONFIG_BOOTDELAY 6      /* -1 disables auto-boot */
 682 #undef CONFIG_BOOTARGS          /* the boot command will set bootargs */
 683
 684 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 685         "netdev=eth0\0"                                                 \
 686         "consoledev=ttyS0\0"                                            \
 687         "ramdiskaddr=1000000\0"                                         \
 688         "ramdiskfile=ramfs.83xx\0"                                      \
 689         "fdtaddr=780000\0"                                              \
 690         "fdtfile=mpc8379_mds.dtb\0"                                     \
 691         ""
 692
 693 #define CONFIG_NFSBOOTCOMMAND                                           \
 694         "setenv bootargs root=/dev/nfs rw "                             \
 695                 "nfsroot=$serverip:$rootpath "                          \
 696                 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:"   \
 697                                                         "$netdev:off "  \
 698                 "console=$consoledev,$baudrate $othbootargs;"           \
 699         "tftp $loadaddr $bootfile;"                                     \
 700         "tftp $fdtaddr $fdtfile;"                                       \
 701         "bootm $loadaddr - $fdtaddr"
 702
 703 #define CONFIG_RAMBOOTCOMMAND                                           \
 704         "setenv bootargs root=/dev/ram rw "                             \
 705                 "console=$consoledev,$baudrate $othbootargs;"           \
 706         "tftp $ramdiskaddr $ramdiskfile;"                               \
 707         "tftp $loadaddr $bootfile;"                                     \
 708         "tftp $fdtaddr $fdtfile;"                                       \
 709         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 710
 711
 712 #define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
 713
 714 #endif  /* __CONFIG_H */