include/configs/MPC8536DS.h

   1 /*
   2  * Copyright 2007-2009,2010-2012 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * mpc8536ds board configuration file
   9  *
  10  */
  11 #ifndef __CONFIG_H
  12 #define __CONFIG_H
  13
  14 #include "../board/freescale/common/ics307_clk.h"
  15
  16 #ifdef CONFIG_SDCARD
  17 #define CONFIG_RAMBOOT_SDCARD           1
  18 #define CONFIG_SYS_TEXT_BASE    0xf8f40000
  19 #define CONFIG_RESET_VECTOR_ADDRESS     0xf8fffffc
  20 #endif
  21
  22 #ifdef CONFIG_SPIFLASH
  23 #define CONFIG_RAMBOOT_SPIFLASH         1
  24 #define CONFIG_SYS_TEXT_BASE    0xf8f40000
  25 #define CONFIG_RESET_VECTOR_ADDRESS     0xf8fffffc
  26 #endif
  27
  28 #ifndef CONFIG_SYS_TEXT_BASE
  29 #define CONFIG_SYS_TEXT_BASE    0xeff40000
  30 #endif
  31
  32 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  33 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  34 #endif
  35
  36 #ifndef CONFIG_SYS_MONITOR_BASE
  37 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
  38 #endif
  39
  40 #define CONFIG_FSL_ELBC         1       /* Has Enhanced localbus controller */
  41 #define CONFIG_PCI1             1       /* Enable PCI controller 1 */
  42 #define CONFIG_PCIE1            1       /* PCIE controller 1 (slot 1) */
  43 #define CONFIG_PCIE2            1       /* PCIE controller 2 (slot 2) */
  44 #define CONFIG_PCIE3            1       /* PCIE controller 3 (ULI bridge) */
  45 #define CONFIG_FSL_PCI_INIT     1       /* Use common FSL init code */
  46 #define CONFIG_PCI_INDIRECT_BRIDGE 1    /* indirect PCI bridge support */
  47 #define CONFIG_FSL_PCIE_RESET   1       /* need PCIe reset errata */
  48 #define CONFIG_SYS_PCI_64BIT    1       /* enable 64-bit PCI resources */
  49
  50
  51 #define CONFIG_TSEC_ENET                /* tsec ethernet support */
  52 #define CONFIG_ENV_OVERWRITE
  53
  54 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk() /* sysclk for MPC85xx */
  55 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk()
  56 #define CONFIG_ICS307_REFCLK_HZ 33333000  /* ICS307 clock chip ref freq */
  57
  58 /*
  59  * These can be toggled for performance analysis, otherwise use default.
  60  */
  61 #define CONFIG_L2_CACHE                 /* toggle L2 cache */
  62 #define CONFIG_BTB                      /* toggle branch predition */
  63
  64 #define CONFIG_ENABLE_36BIT_PHYS        1
  65
  66 #ifdef CONFIG_PHYS_64BIT
  67 #define CONFIG_ADDR_MAP                 1
  68 #define CONFIG_SYS_NUM_ADDR_MAP         16      /* number of TLB1 entries */
  69 #endif
  70
  71 #define CONFIG_SYS_MEMTEST_START 0x00010000     /* skip exception vectors */
  72 #define CONFIG_SYS_MEMTEST_END   0x1f000000     /* skip u-boot at top of RAM */
  73 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
  74
  75 /*
  76  * Config the L2 Cache as L2 SRAM
  77  */
  78 #define CONFIG_SYS_INIT_L2_ADDR         0xf8f80000
  79 #ifdef CONFIG_PHYS_64BIT
  80 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    0xff8f80000ull
  81 #else
  82 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
  83 #endif
  84 #define CONFIG_SYS_L2_SIZE              (512 << 10)
  85 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
  86
  87 #define CONFIG_SYS_CCSRBAR              0xffe00000
  88 #define CONFIG_SYS_CCSRBAR_PHYS_LOW     CONFIG_SYS_CCSRBAR
  89
  90 #if defined(CONFIG_NAND_SPL)
  91 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  92 #endif
  93
  94 /* DDR Setup */
  95 #define CONFIG_VERY_BIG_RAM
  96 #undef CONFIG_FSL_DDR_INTERACTIVE
  97 #define CONFIG_SPD_EEPROM               /* Use SPD EEPROM for DDR setup */
  98 #define CONFIG_DDR_SPD
  99
 100 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER       /* DDR controller or DMA? */
 101 #define CONFIG_MEM_INIT_VALUE   0xDeadBeef
 102
 103 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 104 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 105
 106 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 107 #define CONFIG_CHIP_SELECTS_PER_CTRL    2
 108
 109 /* I2C addresses of SPD EEPROMs */
 110 #define SPD_EEPROM_ADDRESS      0x51    /* CTLR 0 DIMM 0 */
 111 #define CONFIG_SYS_SPD_BUS_NUM          1
 112
 113 /* These are used when DDR doesn't use SPD. */
 114 #define CONFIG_SYS_SDRAM_SIZE           256     /* DDR is 256MB */
 115 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000001F
 116 #define CONFIG_SYS_DDR_CS0_CONFIG       0x80010102 /* Enable, no interleaving */
 117 #define CONFIG_SYS_DDR_TIMING_3 0x00000000
 118 #define CONFIG_SYS_DDR_TIMING_0 0x00260802
 119 #define CONFIG_SYS_DDR_TIMING_1 0x3935d322
 120 #define CONFIG_SYS_DDR_TIMING_2 0x14904cc8
 121 #define CONFIG_SYS_DDR_MODE_1           0x00480432
 122 #define CONFIG_SYS_DDR_MODE_2           0x00000000
 123 #define CONFIG_SYS_DDR_INTERVAL 0x06180100
 124 #define CONFIG_SYS_DDR_DATA_INIT        0xdeadbeef
 125 #define CONFIG_SYS_DDR_CLK_CTRL 0x03800000
 126 #define CONFIG_SYS_DDR_OCD_CTRL 0x00000000
 127 #define CONFIG_SYS_DDR_OCD_STATUS       0x00000000
 128 #define CONFIG_SYS_DDR_CONTROL  0xC3008000      /* Type = DDR2 */
 129 #define CONFIG_SYS_DDR_CONTROL2 0x04400010
 130
 131 #define CONFIG_SYS_DDR_ERR_INT_EN       0x0000000d
 132 #define CONFIG_SYS_DDR_ERR_DIS          0x00000000
 133 #define CONFIG_SYS_DDR_SBE              0x00010000
 134
 135 /* Make sure required options are set */
 136 #ifndef CONFIG_SPD_EEPROM
 137 #error ("CONFIG_SPD_EEPROM is required")
 138 #endif
 139
 140 #undef CONFIG_CLOCKS_IN_MHZ
 141
 142 /*
 143  * Memory map -- xxx -this is wrong, needs updating
 144  *
 145  * 0x0000_0000  0x7fff_ffff     DDR                     2G Cacheable
 146  * 0x8000_0000  0xbfff_ffff     PCI Express Mem         1G non-cacheable
 147  * 0xc000_0000  0xdfff_ffff     PCI                     512M non-cacheable
 148  * 0xe100_0000  0xe3ff_ffff     PCI IO range            4M non-cacheable
 149  *
 150  * Localbus cacheable (TBD)
 151  * 0xXXXX_XXXX  0xXXXX_XXXX     SRAM                    YZ M Cacheable
 152  *
 153  * Localbus non-cacheable
 154  * 0xe000_0000  0xe7ff_ffff     Promjet/free            128M non-cacheable
 155  * 0xe800_0000  0xefff_ffff     FLASH                   128M non-cacheable
 156  * 0xffa0_0000  0xffaf_ffff     NAND                    1M non-cacheable
 157  * 0xffdf_0000  0xffdf_7fff     PIXIS                   32K non-cacheable TLB0
 158  * 0xffd0_0000  0xffd0_3fff     L1 for stack            16K Cacheable TLB0
 159  * 0xffe0_0000  0xffef_ffff     CCSR                    1M non-cacheable
 160  */
 161
 162 /*
 163  * Local Bus Definitions
 164  */
 165 #define CONFIG_SYS_FLASH_BASE           0xe0000000      /* start of FLASH 128M */
 166 #ifdef CONFIG_PHYS_64BIT
 167 #define CONFIG_SYS_FLASH_BASE_PHYS      0xfe0000000ull
 168 #else
 169 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 170 #endif
 171
 172 #define CONFIG_FLASH_BR_PRELIM \
 173         (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000) | BR_PS_16 | BR_V)
 174 #define CONFIG_FLASH_OR_PRELIM  0xf8000ff7
 175
 176 #define CONFIG_SYS_BR1_PRELIM \
 177                 (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \
 178                  | BR_PS_16 | BR_V)
 179 #define CONFIG_SYS_OR1_PRELIM   0xf8000ff7
 180
 181 #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, \
 182                                       CONFIG_SYS_FLASH_BASE_PHYS }
 183 #define CONFIG_SYS_FLASH_QUIET_TEST
 184 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
 185
 186 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 187 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 188 #undef  CONFIG_SYS_FLASH_CHECKSUM
 189 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 190 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 191
 192 #if defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH)
 193 #define CONFIG_SYS_RAMBOOT
 194 #define CONFIG_SYS_EXTRA_ENV_RELOC
 195 #else
 196 #undef CONFIG_SYS_RAMBOOT
 197 #endif
 198
 199 #define CONFIG_FLASH_CFI_DRIVER
 200 #define CONFIG_SYS_FLASH_CFI
 201 #define CONFIG_SYS_FLASH_EMPTY_INFO
 202 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7
 203
 204 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
 205
 206 #define CONFIG_HWCONFIG                 /* enable hwconfig */
 207 #define CONFIG_FSL_PIXIS        1       /* use common PIXIS code */
 208 #define PIXIS_BASE      0xffdf0000      /* PIXIS registers */
 209 #ifdef CONFIG_PHYS_64BIT
 210 #define PIXIS_BASE_PHYS 0xfffdf0000ull
 211 #else
 212 #define PIXIS_BASE_PHYS PIXIS_BASE
 213 #endif
 214
 215 #define CONFIG_SYS_BR3_PRELIM   (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V)
 216 #define CONFIG_SYS_OR3_PRELIM   0xffffeff7      /* 32KB but only 4k mapped */
 217
 218 #define PIXIS_ID                0x0     /* Board ID at offset 0 */
 219 #define PIXIS_VER               0x1     /* Board version at offset 1 */
 220 #define PIXIS_PVER              0x2     /* PIXIS FPGA version at offset 2 */
 221 #define PIXIS_CSR               0x3     /* PIXIS General control/status register */
 222 #define PIXIS_RST               0x4     /* PIXIS Reset Control register */
 223 #define PIXIS_PWR               0x5     /* PIXIS Power status register */
 224 #define PIXIS_AUX               0x6     /* Auxiliary 1 register */
 225 #define PIXIS_SPD               0x7     /* Register for SYSCLK speed */
 226 #define PIXIS_AUX2              0x8     /* Auxiliary 2 register */
 227 #define PIXIS_VCTL              0x10    /* VELA Control Register */
 228 #define PIXIS_VSTAT             0x11    /* VELA Status Register */
 229 #define PIXIS_VCFGEN0           0x12    /* VELA Config Enable 0 */
 230 #define PIXIS_VCFGEN1           0x13    /* VELA Config Enable 1 */
 231 #define PIXIS_VCORE0            0x14    /* VELA VCORE0 Register */
 232 #define PIXIS_VBOOT             0x16    /* VELA VBOOT Register */
 233 #define PIXIS_VBOOT_LBMAP       0xe0    /* VBOOT - CFG_LBMAP */
 234 #define PIXIS_VBOOT_LBMAP_NOR0  0x00    /* cfg_lbmap - boot from NOR 0 */
 235 #define PIXIS_VBOOT_LBMAP_NOR1  0x01    /* cfg_lbmap - boot from NOR 1 */
 236 #define PIXIS_VBOOT_LBMAP_NOR2  0x02    /* cfg_lbmap - boot from NOR 2 */
 237 #define PIXIS_VBOOT_LBMAP_NOR3  0x03    /* cfg_lbmap - boot from NOR 3 */
 238 #define PIXIS_VBOOT_LBMAP_PJET  0x04    /* cfg_lbmap - boot from projet */
 239 #define PIXIS_VBOOT_LBMAP_NAND  0x05    /* cfg_lbmap - boot from NAND */
 240 #define PIXIS_VSPEED0           0x17    /* VELA VSpeed 0 */
 241 #define PIXIS_VSPEED1           0x18    /* VELA VSpeed 1 */
 242 #define PIXIS_VSPEED2           0x19    /* VELA VSpeed 2 */
 243 #define PIXIS_VSYSCLK0          0x1A    /* VELA SYSCLK0 Register */
 244 #define PIXIS_VSYSCLK1          0x1B    /* VELA SYSCLK1 Register */
 245 #define PIXIS_VSYSCLK2          0x1C    /* VELA SYSCLK2 Register */
 246 #define PIXIS_VDDRCLK0          0x1D    /* VELA DDRCLK0 Register */
 247 #define PIXIS_VDDRCLK1          0x1E    /* VELA DDRCLK1 Register */
 248 #define PIXIS_VDDRCLK2          0x1F    /* VELA DDRCLK2 Register */
 249 #define PIXIS_VWATCH            0x24    /* Watchdog Register */
 250 #define PIXIS_LED               0x25    /* LED Register */
 251
 252 #define PIXIS_SPD_SYSCLK        0x7     /* SYSCLK option */
 253
 254 /* old pixis referenced names */
 255 #define PIXIS_VCLKH             0x19    /* VELA VCLKH register */
 256 #define PIXIS_VCLKL             0x1A    /* VELA VCLKL register */
 257 #define CONFIG_SYS_PIXIS_VBOOT_MASK     0x4e
 258
 259 #define CONFIG_SYS_INIT_RAM_LOCK        1
 260 #define CONFIG_SYS_INIT_RAM_ADDR        0xffd00000      /* Initial L1 address */
 261 #define CONFIG_SYS_INIT_RAM_SIZE        0x00004000      /* Size of used area in RAM */
 262
 263 #define CONFIG_SYS_GBL_DATA_OFFSET \
 264                 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 265 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 266
 267 #define CONFIG_SYS_MONITOR_LEN  (256 * 1024) /* Reserve 256 kB for Mon */
 268 #define CONFIG_SYS_MALLOC_LEN   (1024 * 1024)   /* Reserved for malloc */
 269
 270 #ifndef CONFIG_NAND_SPL
 271 #define CONFIG_SYS_NAND_BASE            0xffa00000
 272 #ifdef CONFIG_PHYS_64BIT
 273 #define CONFIG_SYS_NAND_BASE_PHYS       0xfffa00000ull
 274 #else
 275 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 276 #endif
 277 #else
 278 #define CONFIG_SYS_NAND_BASE            0xfff00000
 279 #ifdef CONFIG_PHYS_64BIT
 280 #define CONFIG_SYS_NAND_BASE_PHYS       0xffff00000ull
 281 #else
 282 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 283 #endif
 284 #endif
 285 #define CONFIG_SYS_NAND_BASE_LIST     { CONFIG_SYS_NAND_BASE,\
 286                                 CONFIG_SYS_NAND_BASE + 0x40000, \
 287                                 CONFIG_SYS_NAND_BASE + 0x80000, \
 288                                 CONFIG_SYS_NAND_BASE + 0xC0000}
 289 #define CONFIG_SYS_MAX_NAND_DEVICE      4
 290 #define CONFIG_CMD_NAND         1
 291 #define CONFIG_NAND_FSL_ELBC    1
 292 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 293
 294 /* NAND boot: 4K NAND loader config */
 295 #define CONFIG_SYS_NAND_SPL_SIZE        0x1000
 296 #define CONFIG_SYS_NAND_U_BOOT_SIZE     ((768 << 10) - 0x2000)
 297 #define CONFIG_SYS_NAND_U_BOOT_DST      (CONFIG_SYS_INIT_L2_ADDR)
 298 #define CONFIG_SYS_NAND_U_BOOT_START \
 299                 (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_NAND_SPL_SIZE)
 300 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (0)
 301 #define CONFIG_SYS_NAND_U_BOOT_RELOC    (CONFIG_SYS_INIT_L2_END - 0x2000)
 302 #define CONFIG_SYS_NAND_U_BOOT_RELOC_SP ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF)
 303
 304 /* NAND flash config */
 305 #define CONFIG_SYS_NAND_BR_PRELIM \
 306                 (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 307                 | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 308                 | BR_PS_8               /* Port Size = 8 bit */ \
 309                 | BR_MS_FCM             /* MSEL = FCM */ \
 310                 | BR_V)                 /* valid */
 311 #define CONFIG_SYS_NAND_OR_PRELIM       (0xFFFC0000     /* length 256K */ \
 312                 | OR_FCM_PGS            /* Large Page*/ \
 313                 | OR_FCM_CSCT \
 314                 | OR_FCM_CST \
 315                 | OR_FCM_CHT \
 316                 | OR_FCM_SCY_1 \
 317                 | OR_FCM_TRLX \
 318                 | OR_FCM_EHTR)
 319
 320 #define CONFIG_SYS_BR0_PRELIM  CONFIG_FLASH_BR_PRELIM   /* NOR Base Address */
 321 #define CONFIG_SYS_OR0_PRELIM  CONFIG_FLASH_OR_PRELIM   /* NOR Options */
 322 #define CONFIG_SYS_BR2_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 323 #define CONFIG_SYS_OR2_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 324
 325 #define CONFIG_SYS_BR4_PRELIM \
 326                 (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0x40000) \
 327                 | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 328                 | BR_PS_8               /* Port Size = 8 bit */ \
 329                 | BR_MS_FCM             /* MSEL = FCM */ \
 330                 | BR_V)                 /* valid */
 331 #define CONFIG_SYS_OR4_PRELIM   CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 332 #define CONFIG_SYS_BR5_PRELIM \
 333                 (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0x80000) \
 334                 | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 335                 | BR_PS_8               /* Port Size = 8 bit */ \
 336                 | BR_MS_FCM             /* MSEL = FCM */ \
 337                 | BR_V)                 /* valid */
 338 #define CONFIG_SYS_OR5_PRELIM   CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 339
 340 #define CONFIG_SYS_BR6_PRELIM \
 341                 (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0xc0000) \
 342                 | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 343                 | BR_PS_8               /* Port Size = 8 bit */ \
 344                 | BR_MS_FCM             /* MSEL = FCM */ \
 345                 | BR_V)                 /* valid */
 346 #define CONFIG_SYS_OR6_PRELIM   CONFIG_SYS_NAND_OR_PRELIM       /* NAND Options */
 347
 348 /* Serial Port - controlled on board with jumper J8
 349  * open - index 2
 350  * shorted - index 1
 351  */
 352 #define CONFIG_CONS_INDEX       1
 353 #define CONFIG_SYS_NS16550_SERIAL
 354 #define CONFIG_SYS_NS16550_REG_SIZE     1
 355 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 356 #ifdef CONFIG_NAND_SPL
 357 #define CONFIG_NS16550_MIN_FUNCTIONS
 358 #endif
 359
 360 #define CONFIG_SYS_BAUDRATE_TABLE       \
 361         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 362
 363 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR + 0x4500)
 364 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR + 0x4600)
 365
 366 /*
 367  * I2C
 368  */
 369 #define CONFIG_SYS_I2C
 370 #define CONFIG_SYS_I2C_FSL
 371 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 372 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 373 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 374 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 375 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 376 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x3100
 377 #define CONFIG_SYS_I2C_NOPROBES         { {0, 0x29} }
 378
 379 /*
 380  * I2C2 EEPROM
 381  */
 382 #define CONFIG_ID_EEPROM
 383 #ifdef CONFIG_ID_EEPROM
 384 #define CONFIG_SYS_I2C_EEPROM_NXID
 385 #endif
 386 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 387 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 388 #define CONFIG_SYS_EEPROM_BUS_NUM       1
 389
 390 /*
 391  * eSPI - Enhanced SPI
 392  */
 393 #define CONFIG_HARD_SPI
 394
 395 #if defined(CONFIG_SPI_FLASH)
 396 #define CONFIG_SF_DEFAULT_SPEED 10000000
 397 #define CONFIG_SF_DEFAULT_MODE  0
 398 #endif
 399
 400 /*
 401  * General PCI
 402  * Memory space is mapped 1-1, but I/O space must start from 0.
 403  */
 404
 405 #define CONFIG_SYS_PCI1_MEM_VIRT        0x80000000
 406 #ifdef CONFIG_PHYS_64BIT
 407 #define CONFIG_SYS_PCI1_MEM_BUS         0xf0000000
 408 #define CONFIG_SYS_PCI1_MEM_PHYS        0xc00000000ull
 409 #else
 410 #define CONFIG_SYS_PCI1_MEM_BUS         0x80000000
 411 #define CONFIG_SYS_PCI1_MEM_PHYS        0x80000000
 412 #endif
 413 #define CONFIG_SYS_PCI1_MEM_SIZE        0x10000000      /* 256M */
 414 #define CONFIG_SYS_PCI1_IO_VIRT         0xffc00000
 415 #define CONFIG_SYS_PCI1_IO_BUS          0x00000000
 416 #ifdef CONFIG_PHYS_64BIT
 417 #define CONFIG_SYS_PCI1_IO_PHYS         0xfffc00000ull
 418 #else
 419 #define CONFIG_SYS_PCI1_IO_PHYS         0xffc00000
 420 #endif
 421 #define CONFIG_SYS_PCI1_IO_SIZE         0x00010000      /* 64k */
 422
 423 /* controller 1, Slot 1, tgtid 1, Base address a000 */
 424 #define CONFIG_SYS_PCIE1_NAME           "Slot 1"
 425 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x90000000
 426 #ifdef CONFIG_PHYS_64BIT
 427 #define CONFIG_SYS_PCIE1_MEM_BUS        0xf8000000
 428 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc10000000ull
 429 #else
 430 #define CONFIG_SYS_PCIE1_MEM_BUS        0x90000000
 431 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x90000000
 432 #endif
 433 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x08000000      /* 128M */
 434 #define CONFIG_SYS_PCIE1_IO_VIRT        0xffc10000
 435 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 436 #ifdef CONFIG_PHYS_64BIT
 437 #define CONFIG_SYS_PCIE1_IO_PHYS        0xfffc10000ull
 438 #else
 439 #define CONFIG_SYS_PCIE1_IO_PHYS        0xffc10000
 440 #endif
 441 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 442
 443 /* controller 2, Slot 2, tgtid 2, Base address 9000 */
 444 #define CONFIG_SYS_PCIE2_NAME           "Slot 2"
 445 #define CONFIG_SYS_PCIE2_MEM_VIRT       0x98000000
 446 #ifdef CONFIG_PHYS_64BIT
 447 #define CONFIG_SYS_PCIE2_MEM_BUS        0xf8000000
 448 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc18000000ull
 449 #else
 450 #define CONFIG_SYS_PCIE2_MEM_BUS        0x98000000
 451 #define CONFIG_SYS_PCIE2_MEM_PHYS       0x98000000
 452 #endif
 453 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x08000000      /* 128M */
 454 #define CONFIG_SYS_PCIE2_IO_VIRT        0xffc20000
 455 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 456 #ifdef CONFIG_PHYS_64BIT
 457 #define CONFIG_SYS_PCIE2_IO_PHYS        0xfffc20000ull
 458 #else
 459 #define CONFIG_SYS_PCIE2_IO_PHYS        0xffc20000
 460 #endif
 461 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 462
 463 /* controller 3, direct to uli, tgtid 3, Base address 8000 */
 464 #define CONFIG_SYS_PCIE3_NAME           "Slot 3"
 465 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xa0000000
 466 #ifdef CONFIG_PHYS_64BIT
 467 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 468 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc20000000ull
 469 #else
 470 #define CONFIG_SYS_PCIE3_MEM_BUS        0xa0000000
 471 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xa0000000
 472 #endif
 473 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
 474 #define CONFIG_SYS_PCIE3_IO_VIRT        0xffc30000
 475 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 476 #ifdef CONFIG_PHYS_64BIT
 477 #define CONFIG_SYS_PCIE3_IO_PHYS        0xfffc30000ull
 478 #else
 479 #define CONFIG_SYS_PCIE3_IO_PHYS        0xffc30000
 480 #endif
 481 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 482
 483 #if defined(CONFIG_PCI)
 484 /*PCIE video card used*/
 485 #define VIDEO_IO_OFFSET         CONFIG_SYS_PCIE3_IO_VIRT
 486
 487 /*PCI video card used*/
 488 /*#define VIDEO_IO_OFFSET       CONFIG_SYS_PCI1_IO_VIRT*/
 489
 490 /* video */
 491
 492 #if defined(CONFIG_VIDEO)
 493 #define CONFIG_BIOSEMU
 494 #define CONFIG_ATI_RADEON_FB
 495 #define CONFIG_VIDEO_LOGO
 496 #define CONFIG_SYS_ISA_IO_BASE_ADDRESS CONFIG_SYS_PCIE3_IO_VIRT
 497 #endif
 498
 499 #undef CONFIG_EEPRO100
 500 #undef CONFIG_TULIP
 501
 502 #ifndef CONFIG_PCI_PNP
 503         #define PCI_ENET0_IOADDR        CONFIG_SYS_PCI1_IO_BUS
 504         #define PCI_ENET0_MEMADDR       CONFIG_SYS_PCI1_IO_BUS
 505         #define PCI_IDSEL_NUMBER        0x11    /* IDSEL = AD11 */
 506 #endif
 507
 508 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 509
 510 #endif  /* CONFIG_PCI */
 511
 512 /* SATA */
 513 #define CONFIG_LIBATA
 514 #define CONFIG_FSL_SATA
 515
 516 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 517 #define CONFIG_SATA1
 518 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 519 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 520 #define CONFIG_SATA2
 521 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 522 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 523
 524 #ifdef CONFIG_FSL_SATA
 525 #define CONFIG_LBA48
 526 #define CONFIG_CMD_SATA
 527 #define CONFIG_DOS_PARTITION
 528 #endif
 529
 530 #if defined(CONFIG_TSEC_ENET)
 531
 532 #define CONFIG_MII              1       /* MII PHY management */
 533 #define CONFIG_MII_DEFAULT_TSEC 1       /* Allow unregistered phys */
 534 #define CONFIG_TSEC1    1
 535 #define CONFIG_TSEC1_NAME       "eTSEC1"
 536 #define CONFIG_TSEC3    1
 537 #define CONFIG_TSEC3_NAME       "eTSEC3"
 538
 539 #define CONFIG_FSL_SGMII_RISER  1
 540 #define SGMII_RISER_PHY_OFFSET  0x1c
 541
 542 #define TSEC1_PHY_ADDR          1       /* TSEC1 -> PHY1 */
 543 #define TSEC3_PHY_ADDR          0       /* TSEC3 -> PHY0 */
 544
 545 #define TSEC1_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 546 #define TSEC3_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 547
 548 #define TSEC1_PHYIDX            0
 549 #define TSEC3_PHYIDX            0
 550
 551 #define CONFIG_ETHPRIME         "eTSEC1"
 552
 553 #define CONFIG_PHY_GIGE         1       /* Include GbE speed/duplex detection */
 554
 555 #endif  /* CONFIG_TSEC_ENET */
 556
 557 /*
 558  * Environment
 559  */
 560
 561 #if defined(CONFIG_SYS_RAMBOOT)
 562 #if defined(CONFIG_RAMBOOT_SPIFLASH)
 563 #define CONFIG_ENV_IS_IN_SPI_FLASH
 564 #define CONFIG_ENV_SPI_BUS      0
 565 #define CONFIG_ENV_SPI_CS       0
 566 #define CONFIG_ENV_SPI_MAX_HZ   10000000
 567 #define CONFIG_ENV_SPI_MODE     0
 568 #define CONFIG_ENV_SIZE         0x2000  /* 8KB */
 569 #define CONFIG_ENV_OFFSET       0xF0000
 570 #define CONFIG_ENV_SECT_SIZE    0x10000
 571 #elif defined(CONFIG_RAMBOOT_SDCARD)
 572 #define CONFIG_ENV_IS_IN_MMC
 573 #define CONFIG_FSL_FIXED_MMC_LOCATION
 574 #define CONFIG_ENV_SIZE         0x2000
 575 #define CONFIG_SYS_MMC_ENV_DEV  0
 576 #else
 577         #define CONFIG_ENV_IS_NOWHERE   1       /* Store ENV in memory only */
 578         #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - 0x1000)
 579         #define CONFIG_ENV_SIZE         0x2000
 580 #endif
 581 #else
 582         #define CONFIG_ENV_IS_IN_FLASH  1
 583         #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 584         #define CONFIG_ENV_SIZE         0x2000
 585         #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 586 #endif
 587
 588 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download */
 589 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change */
 590
 591 /*
 592  * Command line configuration.
 593  */
 594 #define CONFIG_CMD_IRQ
 595 #define CONFIG_CMD_IRQ
 596 #define CONFIG_CMD_REGINFO
 597
 598 #if defined(CONFIG_PCI)
 599 #define CONFIG_CMD_PCI
 600 #endif
 601
 602 #undef CONFIG_WATCHDOG                  /* watchdog disabled */
 603
 604 #ifdef CONFIG_MMC
 605 #define CONFIG_FSL_ESDHC
 606 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 607 #define CONFIG_GENERIC_MMC
 608 #endif
 609
 610 /*
 611  * USB
 612  */
 613 #define CONFIG_HAS_FSL_MPH_USB
 614 #ifdef CONFIG_HAS_FSL_MPH_USB
 615 #define CONFIG_USB_EHCI
 616
 617 #ifdef CONFIG_USB_EHCI
 618 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 619 #define CONFIG_USB_EHCI_FSL
 620 #endif
 621 #endif
 622
 623 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI)
 624 #define CONFIG_DOS_PARTITION
 625 #endif
 626
 627 /*
 628  * Miscellaneous configurable options
 629  */
 630 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 631 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 632 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 633 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 634 #if defined(CONFIG_CMD_KGDB)
 635 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 636 #else
 637 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 638 #endif
 639 #define CONFIG_SYS_PBSIZE       (CONFIG_SYS_CBSIZE \
 640                 + sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buffer Size */
 641 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 642 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
 643
 644 /*
 645  * For booting Linux, the board info and command line data
 646  * have to be in the first 64 MB of memory, since this is
 647  * the maximum mapped by the Linux kernel during initialization.
 648  */
 649 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20) /* Initial Memory map for Linux */
 650 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 651
 652 #if defined(CONFIG_CMD_KGDB)
 653 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 654 #endif
 655
 656 /*
 657  * Environment Configuration
 658  */
 659
 660 /* The mac addresses for all ethernet interface */
 661 #if defined(CONFIG_TSEC_ENET)
 662 #define CONFIG_HAS_ETH0
 663 #define CONFIG_HAS_ETH1
 664 #define CONFIG_HAS_ETH2
 665 #define CONFIG_HAS_ETH3
 666 #endif
 667
 668 #define CONFIG_IPADDR           192.168.1.254
 669
 670 #define CONFIG_HOSTNAME         unknown
 671 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 672 #define CONFIG_BOOTFILE         "uImage"
 673 #define CONFIG_UBOOTPATH        u-boot.bin /* U-Boot image on TFTP server */
 674
 675 #define CONFIG_SERVERIP         192.168.1.1
 676 #define CONFIG_GATEWAYIP        192.168.1.1
 677 #define CONFIG_NETMASK          255.255.255.0
 678
 679 /* default location for tftp and bootm */
 680 #define CONFIG_LOADADDR         1000000
 681
 682 #undef  CONFIG_BOOTARGS         /* the boot command will set bootargs */
 683
 684 #define CONFIG_BAUDRATE 115200
 685
 686 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 687 "netdev=eth0\0"                                         \
 688 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"                     \
 689 "tftpflash=tftpboot $loadaddr $uboot; "                 \
 690         "protect off " __stringify(CONFIG_SYS_TEXT_BASE)        \
 691                 " +$filesize; " \
 692         "erase " __stringify(CONFIG_SYS_TEXT_BASE)              \
 693                 " +$filesize; " \
 694         "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE)     \
 695                 " $filesize; "  \
 696         "protect on " __stringify(CONFIG_SYS_TEXT_BASE)         \
 697                 " +$filesize; " \
 698         "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE)    \
 699                 " $filesize\0"  \
 700 "consoledev=ttyS0\0"                            \
 701 "ramdiskaddr=2000000\0"                 \
 702 "ramdiskfile=8536ds/ramdisk.uboot\0"            \
 703 "fdtaddr=1e00000\0"                             \
 704 "fdtfile=8536ds/mpc8536ds.dtb\0"                \
 705 "bdev=sda3\0"                                   \
 706 "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0"
 707
 708 #define CONFIG_HDBOOT                           \
 709  "setenv bootargs root=/dev/$bdev rw "          \
 710  "console=$consoledev,$baudrate $othbootargs;"  \
 711  "tftp $loadaddr $bootfile;"                    \
 712  "tftp $fdtaddr $fdtfile;"                      \
 713  "bootm $loadaddr - $fdtaddr"
 714
 715 #define CONFIG_NFSBOOTCOMMAND           \
 716  "setenv bootargs root=/dev/nfs rw "    \
 717  "nfsroot=$serverip:$rootpath "         \
 718  "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 719  "console=$consoledev,$baudrate $othbootargs;"  \
 720  "tftp $loadaddr $bootfile;"            \
 721  "tftp $fdtaddr $fdtfile;"              \
 722  "bootm $loadaddr - $fdtaddr"
 723
 724 #define CONFIG_RAMBOOTCOMMAND           \
 725  "setenv bootargs root=/dev/ram rw "    \
 726  "console=$consoledev,$baudrate $othbootargs;"  \
 727  "tftp $ramdiskaddr $ramdiskfile;"      \
 728  "tftp $loadaddr $bootfile;"            \
 729  "tftp $fdtaddr $fdtfile;"              \
 730  "bootm $loadaddr $ramdiskaddr $fdtaddr"
 731
 732 #define CONFIG_BOOTCOMMAND              CONFIG_HDBOOT
 733
 734 #endif  /* __CONFIG_H */