include/configs/MPC8536DS.h

   1 /*
   2  * Copyright 2007-2009,2010-2012 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * mpc8536ds board configuration file
   9  *
  10  */
  11 #ifndef __CONFIG_H
  12 #define __CONFIG_H
  13
  14 #include "../board/freescale/common/ics307_clk.h"
  15
  16 #ifdef CONFIG_SDCARD
  17 #define CONFIG_RAMBOOT_SDCARD           1
  18 #define CONFIG_SYS_TEXT_BASE    0xf8f40000
  19 #define CONFIG_RESET_VECTOR_ADDRESS     0xf8fffffc
  20 #endif
  21
  22 #ifdef CONFIG_SPIFLASH
  23 #define CONFIG_RAMBOOT_SPIFLASH         1
  24 #define CONFIG_SYS_TEXT_BASE    0xf8f40000
  25 #define CONFIG_RESET_VECTOR_ADDRESS     0xf8fffffc
  26 #endif
  27
  28 #ifndef CONFIG_SYS_TEXT_BASE
  29 #define CONFIG_SYS_TEXT_BASE    0xeff40000
  30 #endif
  31
  32 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  33 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  34 #endif
  35
  36 #ifndef CONFIG_SYS_MONITOR_BASE
  37 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
  38 #endif
  39
  40 #define CONFIG_FSL_ELBC         1       /* Has Enhanced localbus controller */
  41 #define CONFIG_PCI1             1       /* Enable PCI controller 1 */
  42 #define CONFIG_PCIE1            1       /* PCIE controller 1 (slot 1) */
  43 #define CONFIG_PCIE2            1       /* PCIE controller 2 (slot 2) */
  44 #define CONFIG_PCIE3            1       /* PCIE controller 3 (ULI bridge) */
  45 #define CONFIG_FSL_PCI_INIT     1       /* Use common FSL init code */
  46 #define CONFIG_PCI_INDIRECT_BRIDGE 1    /* indirect PCI bridge support */
  47 #define CONFIG_FSL_PCIE_RESET   1       /* need PCIe reset errata */
  48 #define CONFIG_SYS_PCI_64BIT    1       /* enable 64-bit PCI resources */
  49
  50
  51 #define CONFIG_TSEC_ENET                /* tsec ethernet support */
  52 #define CONFIG_ENV_OVERWRITE
  53
  54 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk() /* sysclk for MPC85xx */
  55 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk()
  56 #define CONFIG_ICS307_REFCLK_HZ 33333000  /* ICS307 clock chip ref freq */
  57
  58 /*
  59  * These can be toggled for performance analysis, otherwise use default.
  60  */
  61 #define CONFIG_L2_CACHE                 /* toggle L2 cache */
  62 #define CONFIG_BTB                      /* toggle branch predition */
  63
  64 #define CONFIG_BOARD_EARLY_INIT_F       1       /* Call board_pre_init */
  65
  66 #define CONFIG_ENABLE_36BIT_PHYS        1
  67
  68 #ifdef CONFIG_PHYS_64BIT
  69 #define CONFIG_ADDR_MAP                 1
  70 #define CONFIG_SYS_NUM_ADDR_MAP         16      /* number of TLB1 entries */
  71 #endif
  72
  73 #define CONFIG_SYS_MEMTEST_START 0x00010000     /* skip exception vectors */
  74 #define CONFIG_SYS_MEMTEST_END   0x1f000000     /* skip u-boot at top of RAM */
  75 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
  76
  77 /*
  78  * Config the L2 Cache as L2 SRAM
  79  */
  80 #define CONFIG_SYS_INIT_L2_ADDR         0xf8f80000
  81 #ifdef CONFIG_PHYS_64BIT
  82 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    0xff8f80000ull
  83 #else
  84 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
  85 #endif
  86 #define CONFIG_SYS_L2_SIZE              (512 << 10)
  87 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
  88
  89 #define CONFIG_SYS_CCSRBAR              0xffe00000
  90 #define CONFIG_SYS_CCSRBAR_PHYS_LOW     CONFIG_SYS_CCSRBAR
  91
  92 #if defined(CONFIG_NAND_SPL)
  93 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  94 #endif
  95
  96 /* DDR Setup */
  97 #define CONFIG_VERY_BIG_RAM
  98 #undef CONFIG_FSL_DDR_INTERACTIVE
  99 #define CONFIG_SPD_EEPROM               /* Use SPD EEPROM for DDR setup */
 100 #define CONFIG_DDR_SPD
 101
 102 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER       /* DDR controller or DMA? */
 103 #define CONFIG_MEM_INIT_VALUE   0xDeadBeef
 104
 105 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 106 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 107
 108 #define CONFIG_NUM_DDR_CONTROLLERS      1
 109 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 110 #define CONFIG_CHIP_SELECTS_PER_CTRL    2
 111
 112 /* I2C addresses of SPD EEPROMs */
 113 #define SPD_EEPROM_ADDRESS      0x51    /* CTLR 0 DIMM 0 */
 114 #define CONFIG_SYS_SPD_BUS_NUM          1
 115
 116 /* These are used when DDR doesn't use SPD. */
 117 #define CONFIG_SYS_SDRAM_SIZE           256     /* DDR is 256MB */
 118 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000001F
 119 #define CONFIG_SYS_DDR_CS0_CONFIG       0x80010102 /* Enable, no interleaving */
 120 #define CONFIG_SYS_DDR_TIMING_3 0x00000000
 121 #define CONFIG_SYS_DDR_TIMING_0 0x00260802
 122 #define CONFIG_SYS_DDR_TIMING_1 0x3935d322
 123 #define CONFIG_SYS_DDR_TIMING_2 0x14904cc8
 124 #define CONFIG_SYS_DDR_MODE_1           0x00480432
 125 #define CONFIG_SYS_DDR_MODE_2           0x00000000
 126 #define CONFIG_SYS_DDR_INTERVAL 0x06180100
 127 #define CONFIG_SYS_DDR_DATA_INIT        0xdeadbeef
 128 #define CONFIG_SYS_DDR_CLK_CTRL 0x03800000
 129 #define CONFIG_SYS_DDR_OCD_CTRL 0x00000000
 130 #define CONFIG_SYS_DDR_OCD_STATUS       0x00000000
 131 #define CONFIG_SYS_DDR_CONTROL  0xC3008000      /* Type = DDR2 */
 132 #define CONFIG_SYS_DDR_CONTROL2 0x04400010
 133
 134 #define CONFIG_SYS_DDR_ERR_INT_EN       0x0000000d
 135 #define CONFIG_SYS_DDR_ERR_DIS          0x00000000
 136 #define CONFIG_SYS_DDR_SBE              0x00010000
 137
 138 /* Make sure required options are set */
 139 #ifndef CONFIG_SPD_EEPROM
 140 #error ("CONFIG_SPD_EEPROM is required")
 141 #endif
 142
 143 #undef CONFIG_CLOCKS_IN_MHZ
 144
 145 /*
 146  * Memory map -- xxx -this is wrong, needs updating
 147  *
 148  * 0x0000_0000  0x7fff_ffff     DDR                     2G Cacheable
 149  * 0x8000_0000  0xbfff_ffff     PCI Express Mem         1G non-cacheable
 150  * 0xc000_0000  0xdfff_ffff     PCI                     512M non-cacheable
 151  * 0xe100_0000  0xe3ff_ffff     PCI IO range            4M non-cacheable
 152  *
 153  * Localbus cacheable (TBD)
 154  * 0xXXXX_XXXX  0xXXXX_XXXX     SRAM                    YZ M Cacheable
 155  *
 156  * Localbus non-cacheable
 157  * 0xe000_0000  0xe7ff_ffff     Promjet/free            128M non-cacheable
 158  * 0xe800_0000  0xefff_ffff     FLASH                   128M non-cacheable
 159  * 0xffa0_0000  0xffaf_ffff     NAND                    1M non-cacheable
 160  * 0xffdf_0000  0xffdf_7fff     PIXIS                   32K non-cacheable TLB0
 161  * 0xffd0_0000  0xffd0_3fff     L1 for stack            16K Cacheable TLB0
 162  * 0xffe0_0000  0xffef_ffff     CCSR                    1M non-cacheable
 163  */
 164
 165 /*
 166  * Local Bus Definitions
 167  */
 168 #define CONFIG_SYS_FLASH_BASE           0xe0000000      /* start of FLASH 128M */
 169 #ifdef CONFIG_PHYS_64BIT
 170 #define CONFIG_SYS_FLASH_BASE_PHYS      0xfe0000000ull
 171 #else
 172 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 173 #endif
 174
 175 #define CONFIG_FLASH_BR_PRELIM \
 176         (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000) | BR_PS_16 | BR_V)
 177 #define CONFIG_FLASH_OR_PRELIM  0xf8000ff7
 178
 179 #define CONFIG_SYS_BR1_PRELIM \
 180                 (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \
 181                  | BR_PS_16 | BR_V)
 182 #define CONFIG_SYS_OR1_PRELIM   0xf8000ff7
 183
 184 #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, \
 185                                       CONFIG_SYS_FLASH_BASE_PHYS }
 186 #define CONFIG_SYS_FLASH_QUIET_TEST
 187 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
 188
 189 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 190 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 191 #undef  CONFIG_SYS_FLASH_CHECKSUM
 192 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 193 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 194
 195 #if defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH)
 196 #define CONFIG_SYS_RAMBOOT
 197 #define CONFIG_SYS_EXTRA_ENV_RELOC
 198 #else
 199 #undef CONFIG_SYS_RAMBOOT
 200 #endif
 201
 202 #define CONFIG_FLASH_CFI_DRIVER
 203 #define CONFIG_SYS_FLASH_CFI
 204 #define CONFIG_SYS_FLASH_EMPTY_INFO
 205 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7
 206
 207 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
 208
 209 #define CONFIG_HWCONFIG                 /* enable hwconfig */
 210 #define CONFIG_FSL_PIXIS        1       /* use common PIXIS code */
 211 #define PIXIS_BASE      0xffdf0000      /* PIXIS registers */
 212 #ifdef CONFIG_PHYS_64BIT
 213 #define PIXIS_BASE_PHYS 0xfffdf0000ull
 214 #else
 215 #define PIXIS_BASE_PHYS PIXIS_BASE
 216 #endif
 217
 218 #define CONFIG_SYS_BR3_PRELIM   (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V)
 219 #define CONFIG_SYS_OR3_PRELIM   0xffffeff7      /* 32KB but only 4k mapped */
 220
 221 #define PIXIS_ID                0x0     /* Board ID at offset 0 */
 222 #define PIXIS_VER               0x1     /* Board version at offset 1 */
 223 #define PIXIS_PVER              0x2     /* PIXIS FPGA version at offset 2 */
 224 #define PIXIS_CSR               0x3     /* PIXIS General control/status register */
 225 #define PIXIS_RST               0x4     /* PIXIS Reset Control register */
 226 #define PIXIS_PWR               0x5     /* PIXIS Power status register */
 227 #define PIXIS_AUX               0x6     /* Auxiliary 1 register */
 228 #define PIXIS_SPD               0x7     /* Register for SYSCLK speed */
 229 #define PIXIS_AUX2              0x8     /* Auxiliary 2 register */
 230 #define PIXIS_VCTL              0x10    /* VELA Control Register */
 231 #define PIXIS_VSTAT             0x11    /* VELA Status Register */
 232 #define PIXIS_VCFGEN0           0x12    /* VELA Config Enable 0 */
 233 #define PIXIS_VCFGEN1           0x13    /* VELA Config Enable 1 */
 234 #define PIXIS_VCORE0            0x14    /* VELA VCORE0 Register */
 235 #define PIXIS_VBOOT             0x16    /* VELA VBOOT Register */
 236 #define PIXIS_VBOOT_LBMAP       0xe0    /* VBOOT - CFG_LBMAP */
 237 #define PIXIS_VBOOT_LBMAP_NOR0  0x00    /* cfg_lbmap - boot from NOR 0 */
 238 #define PIXIS_VBOOT_LBMAP_NOR1  0x01    /* cfg_lbmap - boot from NOR 1 */
 239 #define PIXIS_VBOOT_LBMAP_NOR2  0x02    /* cfg_lbmap - boot from NOR 2 */
 240 #define PIXIS_VBOOT_LBMAP_NOR3  0x03    /* cfg_lbmap - boot from NOR 3 */
 241 #define PIXIS_VBOOT_LBMAP_PJET  0x04    /* cfg_lbmap - boot from projet */
 242 #define PIXIS_VBOOT_LBMAP_NAND  0x05    /* cfg_lbmap - boot from NAND */
 243 #define PIXIS_VSPEED0           0x17    /* VELA VSpeed 0 */
 244 #define PIXIS_VSPEED1           0x18    /* VELA VSpeed 1 */
 245 #define PIXIS_VSPEED2           0x19    /* VELA VSpeed 2 */
 246 #define PIXIS_VSYSCLK0          0x1A    /* VELA SYSCLK0 Register */
 247 #define PIXIS_VSYSCLK1          0x1B    /* VELA SYSCLK1 Register */
 248 #define PIXIS_VSYSCLK2          0x1C    /* VELA SYSCLK2 Register */
 249 #define PIXIS_VDDRCLK0          0x1D    /* VELA DDRCLK0 Register */
 250 #define PIXIS_VDDRCLK1          0x1E    /* VELA DDRCLK1 Register */
 251 #define PIXIS_VDDRCLK2          0x1F    /* VELA DDRCLK2 Register */
 252 #define PIXIS_VWATCH            0x24    /* Watchdog Register */
 253 #define PIXIS_LED               0x25    /* LED Register */
 254
 255 #define PIXIS_SPD_SYSCLK        0x7     /* SYSCLK option */
 256
 257 /* old pixis referenced names */
 258 #define PIXIS_VCLKH             0x19    /* VELA VCLKH register */
 259 #define PIXIS_VCLKL             0x1A    /* VELA VCLKL register */
 260 #define CONFIG_SYS_PIXIS_VBOOT_MASK     0x4e
 261
 262 #define CONFIG_SYS_INIT_RAM_LOCK        1
 263 #define CONFIG_SYS_INIT_RAM_ADDR        0xffd00000      /* Initial L1 address */
 264 #define CONFIG_SYS_INIT_RAM_SIZE        0x00004000      /* Size of used area in RAM */
 265
 266 #define CONFIG_SYS_GBL_DATA_OFFSET \
 267                 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 268 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 269
 270 #define CONFIG_SYS_MONITOR_LEN  (256 * 1024) /* Reserve 256 kB for Mon */
 271 #define CONFIG_SYS_MALLOC_LEN   (1024 * 1024)   /* Reserved for malloc */
 272
 273 #ifndef CONFIG_NAND_SPL
 274 #define CONFIG_SYS_NAND_BASE            0xffa00000
 275 #ifdef CONFIG_PHYS_64BIT
 276 #define CONFIG_SYS_NAND_BASE_PHYS       0xfffa00000ull
 277 #else
 278 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 279 #endif
 280 #else
 281 #define CONFIG_SYS_NAND_BASE            0xfff00000
 282 #ifdef CONFIG_PHYS_64BIT
 283 #define CONFIG_SYS_NAND_BASE_PHYS       0xffff00000ull
 284 #else
 285 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 286 #endif
 287 #endif
 288 #define CONFIG_SYS_NAND_BASE_LIST     { CONFIG_SYS_NAND_BASE,\
 289                                 CONFIG_SYS_NAND_BASE + 0x40000, \
 290                                 CONFIG_SYS_NAND_BASE + 0x80000, \
 291                                 CONFIG_SYS_NAND_BASE + 0xC0000}
 292 #define CONFIG_SYS_MAX_NAND_DEVICE      4
 293 #define CONFIG_CMD_NAND         1
 294 #define CONFIG_NAND_FSL_ELBC    1
 295 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 296
 297 /* NAND boot: 4K NAND loader config */
 298 #define CONFIG_SYS_NAND_SPL_SIZE        0x1000
 299 #define CONFIG_SYS_NAND_U_BOOT_SIZE     ((768 << 10) - 0x2000)
 300 #define CONFIG_SYS_NAND_U_BOOT_DST      (CONFIG_SYS_INIT_L2_ADDR)
 301 #define CONFIG_SYS_NAND_U_BOOT_START \
 302                 (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_NAND_SPL_SIZE)
 303 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (0)
 304 #define CONFIG_SYS_NAND_U_BOOT_RELOC    (CONFIG_SYS_INIT_L2_END - 0x2000)
 305 #define CONFIG_SYS_NAND_U_BOOT_RELOC_SP ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF)
 306
 307 /* NAND flash config */
 308 #define CONFIG_SYS_NAND_BR_PRELIM \
 309                 (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 310                 | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 311                 | BR_PS_8               /* Port Size = 8 bit */ \
 312                 | BR_MS_FCM             /* MSEL = FCM */ \
 313                 | BR_V)                 /* valid */
 314 #define CONFIG_SYS_NAND_OR_PRELIM       (0xFFFC0000     /* length 256K */ \
 315                 | OR_FCM_PGS            /* Large Page*/ \
 316                 | OR_FCM_CSCT \
 317                 | OR_FCM_CST \
 318                 | OR_FCM_CHT \
 319                 | OR_FCM_SCY_1 \
 320                 | OR_FCM_TRLX \
 321                 | OR_FCM_EHTR)
 322
 323 #define CONFIG_SYS_BR0_PRELIM  CONFIG_FLASH_BR_PRELIM   /* NOR Base Address */
 324 #define CONFIG_SYS_OR0_PRELIM  CONFIG_FLASH_OR_PRELIM   /* NOR Options */
 325 #define CONFIG_SYS_BR2_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 326 #define CONFIG_SYS_OR2_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 327
 328 #define CONFIG_SYS_BR4_PRELIM \
 329                 (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0x40000) \
 330                 | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 331                 | BR_PS_8               /* Port Size = 8 bit */ \
 332                 | BR_MS_FCM             /* MSEL = FCM */ \
 333                 | BR_V)                 /* valid */
 334 #define CONFIG_SYS_OR4_PRELIM   CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 335 #define CONFIG_SYS_BR5_PRELIM \
 336                 (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0x80000) \
 337                 | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 338                 | BR_PS_8               /* Port Size = 8 bit */ \
 339                 | BR_MS_FCM             /* MSEL = FCM */ \
 340                 | BR_V)                 /* valid */
 341 #define CONFIG_SYS_OR5_PRELIM   CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 342
 343 #define CONFIG_SYS_BR6_PRELIM \
 344                 (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0xc0000) \
 345                 | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 346                 | BR_PS_8               /* Port Size = 8 bit */ \
 347                 | BR_MS_FCM             /* MSEL = FCM */ \
 348                 | BR_V)                 /* valid */
 349 #define CONFIG_SYS_OR6_PRELIM   CONFIG_SYS_NAND_OR_PRELIM       /* NAND Options */
 350
 351 /* Serial Port - controlled on board with jumper J8
 352  * open - index 2
 353  * shorted - index 1
 354  */
 355 #define CONFIG_CONS_INDEX       1
 356 #define CONFIG_SYS_NS16550_SERIAL
 357 #define CONFIG_SYS_NS16550_REG_SIZE     1
 358 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 359 #ifdef CONFIG_NAND_SPL
 360 #define CONFIG_NS16550_MIN_FUNCTIONS
 361 #endif
 362
 363 #define CONFIG_SYS_BAUDRATE_TABLE       \
 364         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 365
 366 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR + 0x4500)
 367 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR + 0x4600)
 368
 369 /*
 370  * I2C
 371  */
 372 #define CONFIG_SYS_I2C
 373 #define CONFIG_SYS_I2C_FSL
 374 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 375 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 376 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 377 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 378 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 379 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x3100
 380 #define CONFIG_SYS_I2C_NOPROBES         { {0, 0x29} }
 381
 382 /*
 383  * I2C2 EEPROM
 384  */
 385 #define CONFIG_ID_EEPROM
 386 #ifdef CONFIG_ID_EEPROM
 387 #define CONFIG_SYS_I2C_EEPROM_NXID
 388 #endif
 389 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 390 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 391 #define CONFIG_SYS_EEPROM_BUS_NUM       1
 392
 393 /*
 394  * eSPI - Enhanced SPI
 395  */
 396 #define CONFIG_HARD_SPI
 397
 398 #if defined(CONFIG_SPI_FLASH)
 399 #define CONFIG_SF_DEFAULT_SPEED 10000000
 400 #define CONFIG_SF_DEFAULT_MODE  0
 401 #endif
 402
 403 /*
 404  * General PCI
 405  * Memory space is mapped 1-1, but I/O space must start from 0.
 406  */
 407
 408 #define CONFIG_SYS_PCI1_MEM_VIRT        0x80000000
 409 #ifdef CONFIG_PHYS_64BIT
 410 #define CONFIG_SYS_PCI1_MEM_BUS         0xf0000000
 411 #define CONFIG_SYS_PCI1_MEM_PHYS        0xc00000000ull
 412 #else
 413 #define CONFIG_SYS_PCI1_MEM_BUS         0x80000000
 414 #define CONFIG_SYS_PCI1_MEM_PHYS        0x80000000
 415 #endif
 416 #define CONFIG_SYS_PCI1_MEM_SIZE        0x10000000      /* 256M */
 417 #define CONFIG_SYS_PCI1_IO_VIRT         0xffc00000
 418 #define CONFIG_SYS_PCI1_IO_BUS          0x00000000
 419 #ifdef CONFIG_PHYS_64BIT
 420 #define CONFIG_SYS_PCI1_IO_PHYS         0xfffc00000ull
 421 #else
 422 #define CONFIG_SYS_PCI1_IO_PHYS         0xffc00000
 423 #endif
 424 #define CONFIG_SYS_PCI1_IO_SIZE         0x00010000      /* 64k */
 425
 426 /* controller 1, Slot 1, tgtid 1, Base address a000 */
 427 #define CONFIG_SYS_PCIE1_NAME           "Slot 1"
 428 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x90000000
 429 #ifdef CONFIG_PHYS_64BIT
 430 #define CONFIG_SYS_PCIE1_MEM_BUS        0xf8000000
 431 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc10000000ull
 432 #else
 433 #define CONFIG_SYS_PCIE1_MEM_BUS        0x90000000
 434 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x90000000
 435 #endif
 436 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x08000000      /* 128M */
 437 #define CONFIG_SYS_PCIE1_IO_VIRT        0xffc10000
 438 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 439 #ifdef CONFIG_PHYS_64BIT
 440 #define CONFIG_SYS_PCIE1_IO_PHYS        0xfffc10000ull
 441 #else
 442 #define CONFIG_SYS_PCIE1_IO_PHYS        0xffc10000
 443 #endif
 444 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 445
 446 /* controller 2, Slot 2, tgtid 2, Base address 9000 */
 447 #define CONFIG_SYS_PCIE2_NAME           "Slot 2"
 448 #define CONFIG_SYS_PCIE2_MEM_VIRT       0x98000000
 449 #ifdef CONFIG_PHYS_64BIT
 450 #define CONFIG_SYS_PCIE2_MEM_BUS        0xf8000000
 451 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc18000000ull
 452 #else
 453 #define CONFIG_SYS_PCIE2_MEM_BUS        0x98000000
 454 #define CONFIG_SYS_PCIE2_MEM_PHYS       0x98000000
 455 #endif
 456 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x08000000      /* 128M */
 457 #define CONFIG_SYS_PCIE2_IO_VIRT        0xffc20000
 458 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 459 #ifdef CONFIG_PHYS_64BIT
 460 #define CONFIG_SYS_PCIE2_IO_PHYS        0xfffc20000ull
 461 #else
 462 #define CONFIG_SYS_PCIE2_IO_PHYS        0xffc20000
 463 #endif
 464 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 465
 466 /* controller 3, direct to uli, tgtid 3, Base address 8000 */
 467 #define CONFIG_SYS_PCIE3_NAME           "Slot 3"
 468 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xa0000000
 469 #ifdef CONFIG_PHYS_64BIT
 470 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 471 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc20000000ull
 472 #else
 473 #define CONFIG_SYS_PCIE3_MEM_BUS        0xa0000000
 474 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xa0000000
 475 #endif
 476 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
 477 #define CONFIG_SYS_PCIE3_IO_VIRT        0xffc30000
 478 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 479 #ifdef CONFIG_PHYS_64BIT
 480 #define CONFIG_SYS_PCIE3_IO_PHYS        0xfffc30000ull
 481 #else
 482 #define CONFIG_SYS_PCIE3_IO_PHYS        0xffc30000
 483 #endif
 484 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 485
 486 #if defined(CONFIG_PCI)
 487 /*PCIE video card used*/
 488 #define VIDEO_IO_OFFSET         CONFIG_SYS_PCIE3_IO_VIRT
 489
 490 /*PCI video card used*/
 491 /*#define VIDEO_IO_OFFSET       CONFIG_SYS_PCI1_IO_VIRT*/
 492
 493 /* video */
 494
 495 #if defined(CONFIG_VIDEO)
 496 #define CONFIG_BIOSEMU
 497 #define CONFIG_ATI_RADEON_FB
 498 #define CONFIG_VIDEO_LOGO
 499 #define CONFIG_SYS_ISA_IO_BASE_ADDRESS CONFIG_SYS_PCIE3_IO_VIRT
 500 #endif
 501
 502 #undef CONFIG_EEPRO100
 503 #undef CONFIG_TULIP
 504
 505 #ifndef CONFIG_PCI_PNP
 506         #define PCI_ENET0_IOADDR        CONFIG_SYS_PCI1_IO_BUS
 507         #define PCI_ENET0_MEMADDR       CONFIG_SYS_PCI1_IO_BUS
 508         #define PCI_IDSEL_NUMBER        0x11    /* IDSEL = AD11 */
 509 #endif
 510
 511 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 512
 513 #endif  /* CONFIG_PCI */
 514
 515 /* SATA */
 516 #define CONFIG_LIBATA
 517 #define CONFIG_FSL_SATA
 518
 519 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 520 #define CONFIG_SATA1
 521 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 522 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 523 #define CONFIG_SATA2
 524 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 525 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 526
 527 #ifdef CONFIG_FSL_SATA
 528 #define CONFIG_LBA48
 529 #define CONFIG_CMD_SATA
 530 #define CONFIG_DOS_PARTITION
 531 #endif
 532
 533 #if defined(CONFIG_TSEC_ENET)
 534
 535 #define CONFIG_MII              1       /* MII PHY management */
 536 #define CONFIG_MII_DEFAULT_TSEC 1       /* Allow unregistered phys */
 537 #define CONFIG_TSEC1    1
 538 #define CONFIG_TSEC1_NAME       "eTSEC1"
 539 #define CONFIG_TSEC3    1
 540 #define CONFIG_TSEC3_NAME       "eTSEC3"
 541
 542 #define CONFIG_FSL_SGMII_RISER  1
 543 #define SGMII_RISER_PHY_OFFSET  0x1c
 544
 545 #define TSEC1_PHY_ADDR          1       /* TSEC1 -> PHY1 */
 546 #define TSEC3_PHY_ADDR          0       /* TSEC3 -> PHY0 */
 547
 548 #define TSEC1_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 549 #define TSEC3_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 550
 551 #define TSEC1_PHYIDX            0
 552 #define TSEC3_PHYIDX            0
 553
 554 #define CONFIG_ETHPRIME         "eTSEC1"
 555
 556 #define CONFIG_PHY_GIGE         1       /* Include GbE speed/duplex detection */
 557
 558 #endif  /* CONFIG_TSEC_ENET */
 559
 560 /*
 561  * Environment
 562  */
 563
 564 #if defined(CONFIG_SYS_RAMBOOT)
 565 #if defined(CONFIG_RAMBOOT_SPIFLASH)
 566 #define CONFIG_ENV_IS_IN_SPI_FLASH
 567 #define CONFIG_ENV_SPI_BUS      0
 568 #define CONFIG_ENV_SPI_CS       0
 569 #define CONFIG_ENV_SPI_MAX_HZ   10000000
 570 #define CONFIG_ENV_SPI_MODE     0
 571 #define CONFIG_ENV_SIZE         0x2000  /* 8KB */
 572 #define CONFIG_ENV_OFFSET       0xF0000
 573 #define CONFIG_ENV_SECT_SIZE    0x10000
 574 #elif defined(CONFIG_RAMBOOT_SDCARD)
 575 #define CONFIG_ENV_IS_IN_MMC
 576 #define CONFIG_FSL_FIXED_MMC_LOCATION
 577 #define CONFIG_ENV_SIZE         0x2000
 578 #define CONFIG_SYS_MMC_ENV_DEV  0
 579 #else
 580         #define CONFIG_ENV_IS_NOWHERE   1       /* Store ENV in memory only */
 581         #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - 0x1000)
 582         #define CONFIG_ENV_SIZE         0x2000
 583 #endif
 584 #else
 585         #define CONFIG_ENV_IS_IN_FLASH  1
 586         #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 587         #define CONFIG_ENV_SIZE         0x2000
 588         #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 589 #endif
 590
 591 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download */
 592 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change */
 593
 594 /*
 595  * Command line configuration.
 596  */
 597 #define CONFIG_CMD_IRQ
 598 #define CONFIG_CMD_IRQ
 599 #define CONFIG_CMD_REGINFO
 600
 601 #if defined(CONFIG_PCI)
 602 #define CONFIG_CMD_PCI
 603 #endif
 604
 605 #undef CONFIG_WATCHDOG                  /* watchdog disabled */
 606
 607 #ifdef CONFIG_MMC
 608 #define CONFIG_FSL_ESDHC
 609 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 610 #define CONFIG_GENERIC_MMC
 611 #endif
 612
 613 /*
 614  * USB
 615  */
 616 #define CONFIG_HAS_FSL_MPH_USB
 617 #ifdef CONFIG_HAS_FSL_MPH_USB
 618 #define CONFIG_USB_EHCI
 619
 620 #ifdef CONFIG_USB_EHCI
 621 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 622 #define CONFIG_USB_EHCI_FSL
 623 #endif
 624 #endif
 625
 626 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI)
 627 #define CONFIG_DOS_PARTITION
 628 #endif
 629
 630 /*
 631  * Miscellaneous configurable options
 632  */
 633 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 634 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 635 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 636 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 637 #if defined(CONFIG_CMD_KGDB)
 638 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 639 #else
 640 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 641 #endif
 642 #define CONFIG_SYS_PBSIZE       (CONFIG_SYS_CBSIZE \
 643                 + sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buffer Size */
 644 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 645 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
 646
 647 /*
 648  * For booting Linux, the board info and command line data
 649  * have to be in the first 64 MB of memory, since this is
 650  * the maximum mapped by the Linux kernel during initialization.
 651  */
 652 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20) /* Initial Memory map for Linux */
 653 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 654
 655 #if defined(CONFIG_CMD_KGDB)
 656 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 657 #endif
 658
 659 /*
 660  * Environment Configuration
 661  */
 662
 663 /* The mac addresses for all ethernet interface */
 664 #if defined(CONFIG_TSEC_ENET)
 665 #define CONFIG_HAS_ETH0
 666 #define CONFIG_HAS_ETH1
 667 #define CONFIG_HAS_ETH2
 668 #define CONFIG_HAS_ETH3
 669 #endif
 670
 671 #define CONFIG_IPADDR           192.168.1.254
 672
 673 #define CONFIG_HOSTNAME         unknown
 674 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 675 #define CONFIG_BOOTFILE         "uImage"
 676 #define CONFIG_UBOOTPATH        u-boot.bin /* U-Boot image on TFTP server */
 677
 678 #define CONFIG_SERVERIP         192.168.1.1
 679 #define CONFIG_GATEWAYIP        192.168.1.1
 680 #define CONFIG_NETMASK          255.255.255.0
 681
 682 /* default location for tftp and bootm */
 683 #define CONFIG_LOADADDR         1000000
 684
 685 #undef  CONFIG_BOOTARGS         /* the boot command will set bootargs */
 686
 687 #define CONFIG_BAUDRATE 115200
 688
 689 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 690 "netdev=eth0\0"                                         \
 691 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"                     \
 692 "tftpflash=tftpboot $loadaddr $uboot; "                 \
 693         "protect off " __stringify(CONFIG_SYS_TEXT_BASE)        \
 694                 " +$filesize; " \
 695         "erase " __stringify(CONFIG_SYS_TEXT_BASE)              \
 696                 " +$filesize; " \
 697         "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE)     \
 698                 " $filesize; "  \
 699         "protect on " __stringify(CONFIG_SYS_TEXT_BASE)         \
 700                 " +$filesize; " \
 701         "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE)    \
 702                 " $filesize\0"  \
 703 "consoledev=ttyS0\0"                            \
 704 "ramdiskaddr=2000000\0"                 \
 705 "ramdiskfile=8536ds/ramdisk.uboot\0"            \
 706 "fdtaddr=1e00000\0"                             \
 707 "fdtfile=8536ds/mpc8536ds.dtb\0"                \
 708 "bdev=sda3\0"                                   \
 709 "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0"
 710
 711 #define CONFIG_HDBOOT                           \
 712  "setenv bootargs root=/dev/$bdev rw "          \
 713  "console=$consoledev,$baudrate $othbootargs;"  \
 714  "tftp $loadaddr $bootfile;"                    \
 715  "tftp $fdtaddr $fdtfile;"                      \
 716  "bootm $loadaddr - $fdtaddr"
 717
 718 #define CONFIG_NFSBOOTCOMMAND           \
 719  "setenv bootargs root=/dev/nfs rw "    \
 720  "nfsroot=$serverip:$rootpath "         \
 721  "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 722  "console=$consoledev,$baudrate $othbootargs;"  \
 723  "tftp $loadaddr $bootfile;"            \
 724  "tftp $fdtaddr $fdtfile;"              \
 725  "bootm $loadaddr - $fdtaddr"
 726
 727 #define CONFIG_RAMBOOTCOMMAND           \
 728  "setenv bootargs root=/dev/ram rw "    \
 729  "console=$consoledev,$baudrate $othbootargs;"  \
 730  "tftp $ramdiskaddr $ramdiskfile;"      \
 731  "tftp $loadaddr $bootfile;"            \
 732  "tftp $fdtaddr $fdtfile;"              \
 733  "bootm $loadaddr $ramdiskaddr $fdtaddr"
 734
 735 #define CONFIG_BOOTCOMMAND              CONFIG_HDBOOT
 736
 737 #endif  /* __CONFIG_H */