include/configs/MPC8536DS.h

   1 /*
   2  * Copyright 2007-2009,2010-2012 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * mpc8536ds board configuration file
   9  *
  10  */
  11 #ifndef __CONFIG_H
  12 #define __CONFIG_H
  13
  14 #define CONFIG_SYS_GENERIC_BOARD
  15 #define CONFIG_DISPLAY_BOARDINFO
  16 #include "../board/freescale/common/ics307_clk.h"
  17
  18 #ifdef CONFIG_36BIT
  19 #define CONFIG_PHYS_64BIT       1
  20 #endif
  21
  22 #ifdef CONFIG_SDCARD
  23 #define CONFIG_RAMBOOT_SDCARD           1
  24 #define CONFIG_SYS_TEXT_BASE    0xf8f40000
  25 #define CONFIG_RESET_VECTOR_ADDRESS     0xf8fffffc
  26 #endif
  27
  28 #ifdef CONFIG_SPIFLASH
  29 #define CONFIG_RAMBOOT_SPIFLASH         1
  30 #define CONFIG_SYS_TEXT_BASE    0xf8f40000
  31 #define CONFIG_RESET_VECTOR_ADDRESS     0xf8fffffc
  32 #endif
  33
  34 #ifndef CONFIG_SYS_TEXT_BASE
  35 #define CONFIG_SYS_TEXT_BASE    0xeff40000
  36 #endif
  37
  38 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  39 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  40 #endif
  41
  42 #ifndef CONFIG_SYS_MONITOR_BASE
  43 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
  44 #endif
  45
  46 /* High Level Configuration Options */
  47 #define CONFIG_BOOKE            1       /* BOOKE */
  48 #define CONFIG_E500             1       /* BOOKE e500 family */
  49 #define CONFIG_MPC8536          1
  50 #define CONFIG_MPC8536DS        1
  51
  52 #define CONFIG_FSL_ELBC         1       /* Has Enhanced localbus controller */
  53 #define CONFIG_PCI              1       /* Enable PCI/PCIE */
  54 #define CONFIG_PCI1             1       /* Enable PCI controller 1 */
  55 #define CONFIG_PCIE1            1       /* PCIE controler 1 (slot 1) */
  56 #define CONFIG_PCIE2            1       /* PCIE controler 2 (slot 2) */
  57 #define CONFIG_PCIE3            1       /* PCIE controler 3 (ULI bridge) */
  58 #define CONFIG_FSL_PCI_INIT     1       /* Use common FSL init code */
  59 #define CONFIG_PCI_INDIRECT_BRIDGE 1    /* indirect PCI bridge support */
  60 #define CONFIG_FSL_PCIE_RESET   1       /* need PCIe reset errata */
  61 #define CONFIG_SYS_PCI_64BIT    1       /* enable 64-bit PCI resources */
  62
  63 #define CONFIG_FSL_LAW          1       /* Use common FSL init code */
  64
  65 #define CONFIG_TSEC_ENET                /* tsec ethernet support */
  66 #define CONFIG_ENV_OVERWRITE
  67
  68 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk() /* sysclk for MPC85xx */
  69 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk()
  70 #define CONFIG_ICS307_REFCLK_HZ 33333000  /* ICS307 clock chip ref freq */
  71
  72 /*
  73  * These can be toggled for performance analysis, otherwise use default.
  74  */
  75 #define CONFIG_L2_CACHE                 /* toggle L2 cache */
  76 #define CONFIG_BTB                      /* toggle branch predition */
  77
  78 #define CONFIG_BOARD_EARLY_INIT_F       1       /* Call board_pre_init */
  79
  80 #define CONFIG_ENABLE_36BIT_PHYS        1
  81
  82 #ifdef CONFIG_PHYS_64BIT
  83 #define CONFIG_ADDR_MAP                 1
  84 #define CONFIG_SYS_NUM_ADDR_MAP         16      /* number of TLB1 entries */
  85 #endif
  86
  87 #define CONFIG_SYS_MEMTEST_START 0x00010000     /* skip exception vectors */
  88 #define CONFIG_SYS_MEMTEST_END   0x1f000000     /* skip u-boot at top of RAM */
  89 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
  90
  91 /*
  92  * Config the L2 Cache as L2 SRAM
  93  */
  94 #define CONFIG_SYS_INIT_L2_ADDR         0xf8f80000
  95 #ifdef CONFIG_PHYS_64BIT
  96 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    0xff8f80000ull
  97 #else
  98 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
  99 #endif
 100 #define CONFIG_SYS_L2_SIZE              (512 << 10)
 101 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 102
 103 #define CONFIG_SYS_CCSRBAR              0xffe00000
 104 #define CONFIG_SYS_CCSRBAR_PHYS_LOW     CONFIG_SYS_CCSRBAR
 105
 106 #if defined(CONFIG_NAND_SPL)
 107 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
 108 #endif
 109
 110 /* DDR Setup */
 111 #define CONFIG_VERY_BIG_RAM
 112 #define CONFIG_SYS_FSL_DDR2
 113 #undef CONFIG_FSL_DDR_INTERACTIVE
 114 #define CONFIG_SPD_EEPROM               /* Use SPD EEPROM for DDR setup */
 115 #define CONFIG_DDR_SPD
 116
 117 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER       /* DDR controller or DMA? */
 118 #define CONFIG_MEM_INIT_VALUE   0xDeadBeef
 119
 120 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 121 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 122
 123 #define CONFIG_NUM_DDR_CONTROLLERS      1
 124 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 125 #define CONFIG_CHIP_SELECTS_PER_CTRL    2
 126
 127 /* I2C addresses of SPD EEPROMs */
 128 #define SPD_EEPROM_ADDRESS      0x51    /* CTLR 0 DIMM 0 */
 129 #define CONFIG_SYS_SPD_BUS_NUM          1
 130
 131 /* These are used when DDR doesn't use SPD. */
 132 #define CONFIG_SYS_SDRAM_SIZE           256     /* DDR is 256MB */
 133 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000001F
 134 #define CONFIG_SYS_DDR_CS0_CONFIG       0x80010102 /* Enable, no interleaving */
 135 #define CONFIG_SYS_DDR_TIMING_3 0x00000000
 136 #define CONFIG_SYS_DDR_TIMING_0 0x00260802
 137 #define CONFIG_SYS_DDR_TIMING_1 0x3935d322
 138 #define CONFIG_SYS_DDR_TIMING_2 0x14904cc8
 139 #define CONFIG_SYS_DDR_MODE_1           0x00480432
 140 #define CONFIG_SYS_DDR_MODE_2           0x00000000
 141 #define CONFIG_SYS_DDR_INTERVAL 0x06180100
 142 #define CONFIG_SYS_DDR_DATA_INIT        0xdeadbeef
 143 #define CONFIG_SYS_DDR_CLK_CTRL 0x03800000
 144 #define CONFIG_SYS_DDR_OCD_CTRL 0x00000000
 145 #define CONFIG_SYS_DDR_OCD_STATUS       0x00000000
 146 #define CONFIG_SYS_DDR_CONTROL  0xC3008000      /* Type = DDR2 */
 147 #define CONFIG_SYS_DDR_CONTROL2 0x04400010
 148
 149 #define CONFIG_SYS_DDR_ERR_INT_EN       0x0000000d
 150 #define CONFIG_SYS_DDR_ERR_DIS          0x00000000
 151 #define CONFIG_SYS_DDR_SBE              0x00010000
 152
 153 /* Make sure required options are set */
 154 #ifndef CONFIG_SPD_EEPROM
 155 #error ("CONFIG_SPD_EEPROM is required")
 156 #endif
 157
 158 #undef CONFIG_CLOCKS_IN_MHZ
 159
 160
 161 /*
 162  * Memory map -- xxx -this is wrong, needs updating
 163  *
 164  * 0x0000_0000  0x7fff_ffff     DDR                     2G Cacheable
 165  * 0x8000_0000  0xbfff_ffff     PCI Express Mem         1G non-cacheable
 166  * 0xc000_0000  0xdfff_ffff     PCI                     512M non-cacheable
 167  * 0xe100_0000  0xe3ff_ffff     PCI IO range            4M non-cacheable
 168  *
 169  * Localbus cacheable (TBD)
 170  * 0xXXXX_XXXX  0xXXXX_XXXX     SRAM                    YZ M Cacheable
 171  *
 172  * Localbus non-cacheable
 173  * 0xe000_0000  0xe7ff_ffff     Promjet/free            128M non-cacheable
 174  * 0xe800_0000  0xefff_ffff     FLASH                   128M non-cacheable
 175  * 0xffa0_0000  0xffaf_ffff     NAND                    1M non-cacheable
 176  * 0xffdf_0000  0xffdf_7fff     PIXIS                   32K non-cacheable TLB0
 177  * 0xffd0_0000  0xffd0_3fff     L1 for stack            16K Cacheable TLB0
 178  * 0xffe0_0000  0xffef_ffff     CCSR                    1M non-cacheable
 179  */
 180
 181 /*
 182  * Local Bus Definitions
 183  */
 184 #define CONFIG_SYS_FLASH_BASE           0xe0000000      /* start of FLASH 128M */
 185 #ifdef CONFIG_PHYS_64BIT
 186 #define CONFIG_SYS_FLASH_BASE_PHYS      0xfe0000000ull
 187 #else
 188 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 189 #endif
 190
 191 #define CONFIG_FLASH_BR_PRELIM \
 192         (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000) | BR_PS_16 | BR_V)
 193 #define CONFIG_FLASH_OR_PRELIM  0xf8000ff7
 194
 195 #define CONFIG_SYS_BR1_PRELIM \
 196                 (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \
 197                  | BR_PS_16 | BR_V)
 198 #define CONFIG_SYS_OR1_PRELIM   0xf8000ff7
 199
 200 #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, \
 201                                       CONFIG_SYS_FLASH_BASE_PHYS }
 202 #define CONFIG_SYS_FLASH_QUIET_TEST
 203 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
 204
 205 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 206 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 207 #undef  CONFIG_SYS_FLASH_CHECKSUM
 208 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 209 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 210
 211 #if defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH)
 212 #define CONFIG_SYS_RAMBOOT
 213 #define CONFIG_SYS_EXTRA_ENV_RELOC
 214 #else
 215 #undef CONFIG_SYS_RAMBOOT
 216 #endif
 217
 218 #define CONFIG_FLASH_CFI_DRIVER
 219 #define CONFIG_SYS_FLASH_CFI
 220 #define CONFIG_SYS_FLASH_EMPTY_INFO
 221 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7
 222
 223 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
 224
 225 #define CONFIG_HWCONFIG                 /* enable hwconfig */
 226 #define CONFIG_FSL_PIXIS        1       /* use common PIXIS code */
 227 #define PIXIS_BASE      0xffdf0000      /* PIXIS registers */
 228 #ifdef CONFIG_PHYS_64BIT
 229 #define PIXIS_BASE_PHYS 0xfffdf0000ull
 230 #else
 231 #define PIXIS_BASE_PHYS PIXIS_BASE
 232 #endif
 233
 234 #define CONFIG_SYS_BR3_PRELIM   (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V)
 235 #define CONFIG_SYS_OR3_PRELIM   0xffffeff7      /* 32KB but only 4k mapped */
 236
 237 #define PIXIS_ID                0x0     /* Board ID at offset 0 */
 238 #define PIXIS_VER               0x1     /* Board version at offset 1 */
 239 #define PIXIS_PVER              0x2     /* PIXIS FPGA version at offset 2 */
 240 #define PIXIS_CSR               0x3     /* PIXIS General control/status register */
 241 #define PIXIS_RST               0x4     /* PIXIS Reset Control register */
 242 #define PIXIS_PWR               0x5     /* PIXIS Power status register */
 243 #define PIXIS_AUX               0x6     /* Auxiliary 1 register */
 244 #define PIXIS_SPD               0x7     /* Register for SYSCLK speed */
 245 #define PIXIS_AUX2              0x8     /* Auxiliary 2 register */
 246 #define PIXIS_VCTL              0x10    /* VELA Control Register */
 247 #define PIXIS_VSTAT             0x11    /* VELA Status Register */
 248 #define PIXIS_VCFGEN0           0x12    /* VELA Config Enable 0 */
 249 #define PIXIS_VCFGEN1           0x13    /* VELA Config Enable 1 */
 250 #define PIXIS_VCORE0            0x14    /* VELA VCORE0 Register */
 251 #define PIXIS_VBOOT             0x16    /* VELA VBOOT Register */
 252 #define PIXIS_VBOOT_LBMAP       0xe0    /* VBOOT - CFG_LBMAP */
 253 #define PIXIS_VBOOT_LBMAP_NOR0  0x00    /* cfg_lbmap - boot from NOR 0 */
 254 #define PIXIS_VBOOT_LBMAP_NOR1  0x01    /* cfg_lbmap - boot from NOR 1 */
 255 #define PIXIS_VBOOT_LBMAP_NOR2  0x02    /* cfg_lbmap - boot from NOR 2 */
 256 #define PIXIS_VBOOT_LBMAP_NOR3  0x03    /* cfg_lbmap - boot from NOR 3 */
 257 #define PIXIS_VBOOT_LBMAP_PJET  0x04    /* cfg_lbmap - boot from projet */
 258 #define PIXIS_VBOOT_LBMAP_NAND  0x05    /* cfg_lbmap - boot from NAND */
 259 #define PIXIS_VSPEED0           0x17    /* VELA VSpeed 0 */
 260 #define PIXIS_VSPEED1           0x18    /* VELA VSpeed 1 */
 261 #define PIXIS_VSPEED2           0x19    /* VELA VSpeed 2 */
 262 #define PIXIS_VSYSCLK0          0x1A    /* VELA SYSCLK0 Register */
 263 #define PIXIS_VSYSCLK1          0x1B    /* VELA SYSCLK1 Register */
 264 #define PIXIS_VSYSCLK2          0x1C    /* VELA SYSCLK2 Register */
 265 #define PIXIS_VDDRCLK0          0x1D    /* VELA DDRCLK0 Register */
 266 #define PIXIS_VDDRCLK1          0x1E    /* VELA DDRCLK1 Register */
 267 #define PIXIS_VDDRCLK2          0x1F    /* VELA DDRCLK2 Register */
 268 #define PIXIS_VWATCH            0x24    /* Watchdog Register */
 269 #define PIXIS_LED               0x25    /* LED Register */
 270
 271 #define PIXIS_SPD_SYSCLK        0x7     /* SYSCLK option */
 272
 273 /* old pixis referenced names */
 274 #define PIXIS_VCLKH             0x19    /* VELA VCLKH register */
 275 #define PIXIS_VCLKL             0x1A    /* VELA VCLKL register */
 276 #define CONFIG_SYS_PIXIS_VBOOT_MASK     0x4e
 277
 278 #define CONFIG_SYS_INIT_RAM_LOCK        1
 279 #define CONFIG_SYS_INIT_RAM_ADDR        0xffd00000      /* Initial L1 address */
 280 #define CONFIG_SYS_INIT_RAM_SIZE        0x00004000      /* Size of used area in RAM */
 281
 282 #define CONFIG_SYS_GBL_DATA_OFFSET \
 283                 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 284 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 285
 286 #define CONFIG_SYS_MONITOR_LEN  (256 * 1024) /* Reserve 256 kB for Mon */
 287 #define CONFIG_SYS_MALLOC_LEN   (1024 * 1024)   /* Reserved for malloc */
 288
 289 #ifndef CONFIG_NAND_SPL
 290 #define CONFIG_SYS_NAND_BASE            0xffa00000
 291 #ifdef CONFIG_PHYS_64BIT
 292 #define CONFIG_SYS_NAND_BASE_PHYS       0xfffa00000ull
 293 #else
 294 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 295 #endif
 296 #else
 297 #define CONFIG_SYS_NAND_BASE            0xfff00000
 298 #ifdef CONFIG_PHYS_64BIT
 299 #define CONFIG_SYS_NAND_BASE_PHYS       0xffff00000ull
 300 #else
 301 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 302 #endif
 303 #endif
 304 #define CONFIG_SYS_NAND_BASE_LIST     { CONFIG_SYS_NAND_BASE,\
 305                                 CONFIG_SYS_NAND_BASE + 0x40000, \
 306                                 CONFIG_SYS_NAND_BASE + 0x80000, \
 307                                 CONFIG_SYS_NAND_BASE + 0xC0000}
 308 #define CONFIG_SYS_MAX_NAND_DEVICE      4
 309 #define CONFIG_CMD_NAND         1
 310 #define CONFIG_NAND_FSL_ELBC    1
 311 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 312
 313 /* NAND boot: 4K NAND loader config */
 314 #define CONFIG_SYS_NAND_SPL_SIZE        0x1000
 315 #define CONFIG_SYS_NAND_U_BOOT_SIZE     ((768 << 10) - 0x2000)
 316 #define CONFIG_SYS_NAND_U_BOOT_DST      (CONFIG_SYS_INIT_L2_ADDR)
 317 #define CONFIG_SYS_NAND_U_BOOT_START \
 318                 (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_NAND_SPL_SIZE)
 319 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (0)
 320 #define CONFIG_SYS_NAND_U_BOOT_RELOC    (CONFIG_SYS_INIT_L2_END - 0x2000)
 321 #define CONFIG_SYS_NAND_U_BOOT_RELOC_SP ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF)
 322
 323 /* NAND flash config */
 324 #define CONFIG_SYS_NAND_BR_PRELIM \
 325                 (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 326                 | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 327                 | BR_PS_8               /* Port Size = 8 bit */ \
 328                 | BR_MS_FCM             /* MSEL = FCM */ \
 329                 | BR_V)                 /* valid */
 330 #define CONFIG_SYS_NAND_OR_PRELIM       (0xFFFC0000     /* length 256K */ \
 331                 | OR_FCM_PGS            /* Large Page*/ \
 332                 | OR_FCM_CSCT \
 333                 | OR_FCM_CST \
 334                 | OR_FCM_CHT \
 335                 | OR_FCM_SCY_1 \
 336                 | OR_FCM_TRLX \
 337                 | OR_FCM_EHTR)
 338
 339 #define CONFIG_SYS_BR0_PRELIM  CONFIG_FLASH_BR_PRELIM   /* NOR Base Address */
 340 #define CONFIG_SYS_OR0_PRELIM  CONFIG_FLASH_OR_PRELIM   /* NOR Options */
 341 #define CONFIG_SYS_BR2_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 342 #define CONFIG_SYS_OR2_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 343
 344 #define CONFIG_SYS_BR4_PRELIM \
 345                 (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0x40000) \
 346                 | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 347                 | BR_PS_8               /* Port Size = 8 bit */ \
 348                 | BR_MS_FCM             /* MSEL = FCM */ \
 349                 | BR_V)                 /* valid */
 350 #define CONFIG_SYS_OR4_PRELIM   CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 351 #define CONFIG_SYS_BR5_PRELIM \
 352                 (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0x80000) \
 353                 | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 354                 | BR_PS_8               /* Port Size = 8 bit */ \
 355                 | BR_MS_FCM             /* MSEL = FCM */ \
 356                 | BR_V)                 /* valid */
 357 #define CONFIG_SYS_OR5_PRELIM   CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 358
 359 #define CONFIG_SYS_BR6_PRELIM \
 360                 (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0xc0000) \
 361                 | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 362                 | BR_PS_8               /* Port Size = 8 bit */ \
 363                 | BR_MS_FCM             /* MSEL = FCM */ \
 364                 | BR_V)                 /* valid */
 365 #define CONFIG_SYS_OR6_PRELIM   CONFIG_SYS_NAND_OR_PRELIM       /* NAND Options */
 366
 367 /* Serial Port - controlled on board with jumper J8
 368  * open - index 2
 369  * shorted - index 1
 370  */
 371 #define CONFIG_CONS_INDEX       1
 372 #define CONFIG_SYS_NS16550
 373 #define CONFIG_SYS_NS16550_SERIAL
 374 #define CONFIG_SYS_NS16550_REG_SIZE     1
 375 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 376 #ifdef CONFIG_NAND_SPL
 377 #define CONFIG_NS16550_MIN_FUNCTIONS
 378 #endif
 379
 380 #define CONFIG_SYS_BAUDRATE_TABLE       \
 381         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 382
 383 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR + 0x4500)
 384 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR + 0x4600)
 385
 386 /* Use the HUSH parser */
 387 #define CONFIG_SYS_HUSH_PARSER
 388
 389 /*
 390  * Pass open firmware flat tree
 391  */
 392 #define CONFIG_OF_LIBFDT                1
 393 #define CONFIG_OF_BOARD_SETUP           1
 394 #define CONFIG_OF_STDOUT_VIA_ALIAS      1
 395
 396 /*
 397  * I2C
 398  */
 399 #define CONFIG_SYS_I2C
 400 #define CONFIG_SYS_I2C_FSL
 401 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 402 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 403 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 404 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 405 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 406 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x3100
 407 #define CONFIG_SYS_I2C_NOPROBES         { {0, 0x29} }
 408
 409 /*
 410  * I2C2 EEPROM
 411  */
 412 #define CONFIG_ID_EEPROM
 413 #ifdef CONFIG_ID_EEPROM
 414 #define CONFIG_SYS_I2C_EEPROM_NXID
 415 #endif
 416 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 417 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 418 #define CONFIG_SYS_EEPROM_BUS_NUM       1
 419
 420 /*
 421  * eSPI - Enhanced SPI
 422  */
 423 #define CONFIG_HARD_SPI
 424 #define CONFIG_FSL_ESPI
 425
 426 #if defined(CONFIG_SPI_FLASH)
 427 #define CONFIG_SPI_FLASH_SPANSION
 428 #define CONFIG_CMD_SF
 429 #define CONFIG_SF_DEFAULT_SPEED 10000000
 430 #define CONFIG_SF_DEFAULT_MODE  0
 431 #endif
 432
 433 /*
 434  * General PCI
 435  * Memory space is mapped 1-1, but I/O space must start from 0.
 436  */
 437
 438 #define CONFIG_SYS_PCI1_MEM_VIRT        0x80000000
 439 #ifdef CONFIG_PHYS_64BIT
 440 #define CONFIG_SYS_PCI1_MEM_BUS         0xf0000000
 441 #define CONFIG_SYS_PCI1_MEM_PHYS        0xc00000000ull
 442 #else
 443 #define CONFIG_SYS_PCI1_MEM_BUS         0x80000000
 444 #define CONFIG_SYS_PCI1_MEM_PHYS        0x80000000
 445 #endif
 446 #define CONFIG_SYS_PCI1_MEM_SIZE        0x10000000      /* 256M */
 447 #define CONFIG_SYS_PCI1_IO_VIRT         0xffc00000
 448 #define CONFIG_SYS_PCI1_IO_BUS          0x00000000
 449 #ifdef CONFIG_PHYS_64BIT
 450 #define CONFIG_SYS_PCI1_IO_PHYS         0xfffc00000ull
 451 #else
 452 #define CONFIG_SYS_PCI1_IO_PHYS         0xffc00000
 453 #endif
 454 #define CONFIG_SYS_PCI1_IO_SIZE         0x00010000      /* 64k */
 455
 456 /* controller 1, Slot 1, tgtid 1, Base address a000 */
 457 #define CONFIG_SYS_PCIE1_NAME           "Slot 1"
 458 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x90000000
 459 #ifdef CONFIG_PHYS_64BIT
 460 #define CONFIG_SYS_PCIE1_MEM_BUS        0xf8000000
 461 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc10000000ull
 462 #else
 463 #define CONFIG_SYS_PCIE1_MEM_BUS        0x90000000
 464 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x90000000
 465 #endif
 466 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x08000000      /* 128M */
 467 #define CONFIG_SYS_PCIE1_IO_VIRT        0xffc10000
 468 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 469 #ifdef CONFIG_PHYS_64BIT
 470 #define CONFIG_SYS_PCIE1_IO_PHYS        0xfffc10000ull
 471 #else
 472 #define CONFIG_SYS_PCIE1_IO_PHYS        0xffc10000
 473 #endif
 474 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 475
 476 /* controller 2, Slot 2, tgtid 2, Base address 9000 */
 477 #define CONFIG_SYS_PCIE2_NAME           "Slot 2"
 478 #define CONFIG_SYS_PCIE2_MEM_VIRT       0x98000000
 479 #ifdef CONFIG_PHYS_64BIT
 480 #define CONFIG_SYS_PCIE2_MEM_BUS        0xf8000000
 481 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc18000000ull
 482 #else
 483 #define CONFIG_SYS_PCIE2_MEM_BUS        0x98000000
 484 #define CONFIG_SYS_PCIE2_MEM_PHYS       0x98000000
 485 #endif
 486 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x08000000      /* 128M */
 487 #define CONFIG_SYS_PCIE2_IO_VIRT        0xffc20000
 488 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 489 #ifdef CONFIG_PHYS_64BIT
 490 #define CONFIG_SYS_PCIE2_IO_PHYS        0xfffc20000ull
 491 #else
 492 #define CONFIG_SYS_PCIE2_IO_PHYS        0xffc20000
 493 #endif
 494 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 495
 496 /* controller 3, direct to uli, tgtid 3, Base address 8000 */
 497 #define CONFIG_SYS_PCIE3_NAME           "Slot 3"
 498 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xa0000000
 499 #ifdef CONFIG_PHYS_64BIT
 500 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 501 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc20000000ull
 502 #else
 503 #define CONFIG_SYS_PCIE3_MEM_BUS        0xa0000000
 504 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xa0000000
 505 #endif
 506 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
 507 #define CONFIG_SYS_PCIE3_IO_VIRT        0xffc30000
 508 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 509 #ifdef CONFIG_PHYS_64BIT
 510 #define CONFIG_SYS_PCIE3_IO_PHYS        0xfffc30000ull
 511 #else
 512 #define CONFIG_SYS_PCIE3_IO_PHYS        0xffc30000
 513 #endif
 514 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 515
 516 #if defined(CONFIG_PCI)
 517
 518 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 519
 520 /*PCIE video card used*/
 521 #define VIDEO_IO_OFFSET         CONFIG_SYS_PCIE3_IO_VIRT
 522
 523 /*PCI video card used*/
 524 /*#define VIDEO_IO_OFFSET       CONFIG_SYS_PCI1_IO_VIRT*/
 525
 526 /* video */
 527 #define CONFIG_VIDEO
 528
 529 #if defined(CONFIG_VIDEO)
 530 #define CONFIG_BIOSEMU
 531 #define CONFIG_CFB_CONSOLE
 532 #define CONFIG_VIDEO_SW_CURSOR
 533 #define CONFIG_VGA_AS_SINGLE_DEVICE
 534 #define CONFIG_ATI_RADEON_FB
 535 #define CONFIG_VIDEO_LOGO
 536 /*#define CONFIG_CONSOLE_CURSOR*/
 537 #define CONFIG_SYS_ISA_IO_BASE_ADDRESS CONFIG_SYS_PCIE3_IO_VIRT
 538 #endif
 539
 540 #undef CONFIG_EEPRO100
 541 #undef CONFIG_TULIP
 542 #undef CONFIG_RTL8139
 543
 544 #ifndef CONFIG_PCI_PNP
 545         #define PCI_ENET0_IOADDR        CONFIG_SYS_PCI1_IO_BUS
 546         #define PCI_ENET0_MEMADDR       CONFIG_SYS_PCI1_IO_BUS
 547         #define PCI_IDSEL_NUMBER        0x11    /* IDSEL = AD11 */
 548 #endif
 549
 550 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 551
 552 #endif  /* CONFIG_PCI */
 553
 554 /* SATA */
 555 #define CONFIG_LIBATA
 556 #define CONFIG_FSL_SATA
 557
 558 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 559 #define CONFIG_SATA1
 560 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 561 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 562 #define CONFIG_SATA2
 563 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 564 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 565
 566 #ifdef CONFIG_FSL_SATA
 567 #define CONFIG_LBA48
 568 #define CONFIG_CMD_SATA
 569 #define CONFIG_DOS_PARTITION
 570 #define CONFIG_CMD_EXT2
 571 #endif
 572
 573 #if defined(CONFIG_TSEC_ENET)
 574
 575 #define CONFIG_MII              1       /* MII PHY management */
 576 #define CONFIG_MII_DEFAULT_TSEC 1       /* Allow unregistered phys */
 577 #define CONFIG_TSEC1    1
 578 #define CONFIG_TSEC1_NAME       "eTSEC1"
 579 #define CONFIG_TSEC3    1
 580 #define CONFIG_TSEC3_NAME       "eTSEC3"
 581
 582 #define CONFIG_FSL_SGMII_RISER  1
 583 #define SGMII_RISER_PHY_OFFSET  0x1c
 584
 585 #define TSEC1_PHY_ADDR          1       /* TSEC1 -> PHY1 */
 586 #define TSEC3_PHY_ADDR          0       /* TSEC3 -> PHY0 */
 587
 588 #define TSEC1_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 589 #define TSEC3_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 590
 591 #define TSEC1_PHYIDX            0
 592 #define TSEC3_PHYIDX            0
 593
 594 #define CONFIG_ETHPRIME         "eTSEC1"
 595
 596 #define CONFIG_PHY_GIGE         1       /* Include GbE speed/duplex detection */
 597
 598 #endif  /* CONFIG_TSEC_ENET */
 599
 600 /*
 601  * Environment
 602  */
 603
 604 #if defined(CONFIG_SYS_RAMBOOT)
 605 #if defined(CONFIG_RAMBOOT_SPIFLASH)
 606 #define CONFIG_ENV_IS_IN_SPI_FLASH
 607 #define CONFIG_ENV_SPI_BUS      0
 608 #define CONFIG_ENV_SPI_CS       0
 609 #define CONFIG_ENV_SPI_MAX_HZ   10000000
 610 #define CONFIG_ENV_SPI_MODE     0
 611 #define CONFIG_ENV_SIZE         0x2000  /* 8KB */
 612 #define CONFIG_ENV_OFFSET       0xF0000
 613 #define CONFIG_ENV_SECT_SIZE    0x10000
 614 #elif defined(CONFIG_RAMBOOT_SDCARD)
 615 #define CONFIG_ENV_IS_IN_MMC
 616 #define CONFIG_FSL_FIXED_MMC_LOCATION
 617 #define CONFIG_ENV_SIZE         0x2000
 618 #define CONFIG_SYS_MMC_ENV_DEV  0
 619 #else
 620         #define CONFIG_ENV_IS_NOWHERE   1       /* Store ENV in memory only */
 621         #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - 0x1000)
 622         #define CONFIG_ENV_SIZE         0x2000
 623 #endif
 624 #else
 625         #define CONFIG_ENV_IS_IN_FLASH  1
 626         #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 627         #define CONFIG_ENV_SIZE         0x2000
 628         #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 629 #endif
 630
 631 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download */
 632 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change */
 633
 634 /*
 635  * Command line configuration.
 636  */
 637 #define CONFIG_CMD_IRQ
 638 #define CONFIG_CMD_PING
 639 #define CONFIG_CMD_I2C
 640 #define CONFIG_CMD_MII
 641 #define CONFIG_CMD_ELF
 642 #define CONFIG_CMD_IRQ
 643 #define CONFIG_CMD_REGINFO
 644
 645 #if defined(CONFIG_PCI)
 646 #define CONFIG_CMD_PCI
 647 #endif
 648
 649 #undef CONFIG_WATCHDOG                  /* watchdog disabled */
 650
 651 #define CONFIG_MMC     1
 652
 653 #ifdef CONFIG_MMC
 654 #define CONFIG_FSL_ESDHC
 655 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 656 #define CONFIG_CMD_MMC
 657 #define CONFIG_GENERIC_MMC
 658 #endif
 659
 660 /*
 661  * USB
 662  */
 663 #define CONFIG_HAS_FSL_MPH_USB
 664 #ifdef CONFIG_HAS_FSL_MPH_USB
 665 #define CONFIG_USB_EHCI
 666
 667 #ifdef CONFIG_USB_EHCI
 668 #define CONFIG_CMD_USB
 669 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 670 #define CONFIG_USB_EHCI_FSL
 671 #define CONFIG_USB_STORAGE
 672 #endif
 673 #endif
 674
 675 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI)
 676 #define CONFIG_CMD_EXT2
 677 #define CONFIG_CMD_FAT
 678 #define CONFIG_DOS_PARTITION
 679 #endif
 680
 681 /*
 682  * Miscellaneous configurable options
 683  */
 684 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 685 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 686 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 687 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 688 #if defined(CONFIG_CMD_KGDB)
 689 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 690 #else
 691 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 692 #endif
 693 #define CONFIG_SYS_PBSIZE       (CONFIG_SYS_CBSIZE \
 694                 + sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buffer Size */
 695 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 696 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
 697
 698 /*
 699  * For booting Linux, the board info and command line data
 700  * have to be in the first 64 MB of memory, since this is
 701  * the maximum mapped by the Linux kernel during initialization.
 702  */
 703 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20) /* Initial Memory map for Linux */
 704 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 705
 706 #if defined(CONFIG_CMD_KGDB)
 707 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 708 #endif
 709
 710 /*
 711  * Environment Configuration
 712  */
 713
 714 /* The mac addresses for all ethernet interface */
 715 #if defined(CONFIG_TSEC_ENET)
 716 #define CONFIG_HAS_ETH0
 717 #define CONFIG_HAS_ETH1
 718 #define CONFIG_HAS_ETH2
 719 #define CONFIG_HAS_ETH3
 720 #endif
 721
 722 #define CONFIG_IPADDR           192.168.1.254
 723
 724 #define CONFIG_HOSTNAME         unknown
 725 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 726 #define CONFIG_BOOTFILE         "uImage"
 727 #define CONFIG_UBOOTPATH        u-boot.bin /* U-Boot image on TFTP server */
 728
 729 #define CONFIG_SERVERIP         192.168.1.1
 730 #define CONFIG_GATEWAYIP        192.168.1.1
 731 #define CONFIG_NETMASK          255.255.255.0
 732
 733 /* default location for tftp and bootm */
 734 #define CONFIG_LOADADDR         1000000
 735
 736 #define CONFIG_BOOTDELAY 10     /* -1 disables auto-boot */
 737 #undef  CONFIG_BOOTARGS         /* the boot command will set bootargs */
 738
 739 #define CONFIG_BAUDRATE 115200
 740
 741 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 742 "netdev=eth0\0"                                         \
 743 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"                     \
 744 "tftpflash=tftpboot $loadaddr $uboot; "                 \
 745         "protect off " __stringify(CONFIG_SYS_TEXT_BASE)        \
 746                 " +$filesize; " \
 747         "erase " __stringify(CONFIG_SYS_TEXT_BASE)              \
 748                 " +$filesize; " \
 749         "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE)     \
 750                 " $filesize; "  \
 751         "protect on " __stringify(CONFIG_SYS_TEXT_BASE)         \
 752                 " +$filesize; " \
 753         "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE)    \
 754                 " $filesize\0"  \
 755 "consoledev=ttyS0\0"                            \
 756 "ramdiskaddr=2000000\0"                 \
 757 "ramdiskfile=8536ds/ramdisk.uboot\0"            \
 758 "fdtaddr=c00000\0"                              \
 759 "fdtfile=8536ds/mpc8536ds.dtb\0"                \
 760 "bdev=sda3\0"                                   \
 761 "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0"
 762
 763 #define CONFIG_HDBOOT                           \
 764  "setenv bootargs root=/dev/$bdev rw "          \
 765  "console=$consoledev,$baudrate $othbootargs;"  \
 766  "tftp $loadaddr $bootfile;"                    \
 767  "tftp $fdtaddr $fdtfile;"                      \
 768  "bootm $loadaddr - $fdtaddr"
 769
 770 #define CONFIG_NFSBOOTCOMMAND           \
 771  "setenv bootargs root=/dev/nfs rw "    \
 772  "nfsroot=$serverip:$rootpath "         \
 773  "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 774  "console=$consoledev,$baudrate $othbootargs;"  \
 775  "tftp $loadaddr $bootfile;"            \
 776  "tftp $fdtaddr $fdtfile;"              \
 777  "bootm $loadaddr - $fdtaddr"
 778
 779 #define CONFIG_RAMBOOTCOMMAND           \
 780  "setenv bootargs root=/dev/ram rw "    \
 781  "console=$consoledev,$baudrate $othbootargs;"  \
 782  "tftp $ramdiskaddr $ramdiskfile;"      \
 783  "tftp $loadaddr $bootfile;"            \
 784  "tftp $fdtaddr $fdtfile;"              \
 785  "bootm $loadaddr $ramdiskaddr $fdtaddr"
 786
 787 #define CONFIG_BOOTCOMMAND              CONFIG_HDBOOT
 788
 789 #endif  /* __CONFIG_H */