include/configs/MPC8536DS.h

   1 /*
   2  * Copyright 2007-2009,2010-2012 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * mpc8536ds board configuration file
   9  *
  10  */
  11 #ifndef __CONFIG_H
  12 #define __CONFIG_H
  13
  14 #include "../board/freescale/common/ics307_clk.h"
  15
  16 #ifdef CONFIG_SDCARD
  17 #define CONFIG_RAMBOOT_SDCARD           1
  18 #define CONFIG_SYS_TEXT_BASE    0xf8f40000
  19 #define CONFIG_RESET_VECTOR_ADDRESS     0xf8fffffc
  20 #endif
  21
  22 #ifdef CONFIG_SPIFLASH
  23 #define CONFIG_RAMBOOT_SPIFLASH         1
  24 #define CONFIG_SYS_TEXT_BASE    0xf8f40000
  25 #define CONFIG_RESET_VECTOR_ADDRESS     0xf8fffffc
  26 #endif
  27
  28 #ifndef CONFIG_SYS_TEXT_BASE
  29 #define CONFIG_SYS_TEXT_BASE    0xeff40000
  30 #endif
  31
  32 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  33 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  34 #endif
  35
  36 #ifndef CONFIG_SYS_MONITOR_BASE
  37 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
  38 #endif
  39
  40 /* High Level Configuration Options */
  41 #define CONFIG_BOOKE            1       /* BOOKE */
  42 #define CONFIG_E500             1       /* BOOKE e500 family */
  43 #define CONFIG_MPC8536          1
  44 #define CONFIG_MPC8536DS        1
  45
  46 #define CONFIG_FSL_ELBC         1       /* Has Enhanced localbus controller */
  47 #define CONFIG_PCI              1       /* Enable PCI/PCIE */
  48 #define CONFIG_PCI1             1       /* Enable PCI controller 1 */
  49 #define CONFIG_PCIE1            1       /* PCIE controller 1 (slot 1) */
  50 #define CONFIG_PCIE2            1       /* PCIE controller 2 (slot 2) */
  51 #define CONFIG_PCIE3            1       /* PCIE controller 3 (ULI bridge) */
  52 #define CONFIG_FSL_PCI_INIT     1       /* Use common FSL init code */
  53 #define CONFIG_PCI_INDIRECT_BRIDGE 1    /* indirect PCI bridge support */
  54 #define CONFIG_FSL_PCIE_RESET   1       /* need PCIe reset errata */
  55 #define CONFIG_SYS_PCI_64BIT    1       /* enable 64-bit PCI resources */
  56
  57 #define CONFIG_FSL_LAW          1       /* Use common FSL init code */
  58
  59 #define CONFIG_TSEC_ENET                /* tsec ethernet support */
  60 #define CONFIG_ENV_OVERWRITE
  61
  62 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk() /* sysclk for MPC85xx */
  63 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk()
  64 #define CONFIG_ICS307_REFCLK_HZ 33333000  /* ICS307 clock chip ref freq */
  65
  66 /*
  67  * These can be toggled for performance analysis, otherwise use default.
  68  */
  69 #define CONFIG_L2_CACHE                 /* toggle L2 cache */
  70 #define CONFIG_BTB                      /* toggle branch predition */
  71
  72 #define CONFIG_BOARD_EARLY_INIT_F       1       /* Call board_pre_init */
  73
  74 #define CONFIG_ENABLE_36BIT_PHYS        1
  75
  76 #ifdef CONFIG_PHYS_64BIT
  77 #define CONFIG_ADDR_MAP                 1
  78 #define CONFIG_SYS_NUM_ADDR_MAP         16      /* number of TLB1 entries */
  79 #endif
  80
  81 #define CONFIG_SYS_MEMTEST_START 0x00010000     /* skip exception vectors */
  82 #define CONFIG_SYS_MEMTEST_END   0x1f000000     /* skip u-boot at top of RAM */
  83 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
  84
  85 /*
  86  * Config the L2 Cache as L2 SRAM
  87  */
  88 #define CONFIG_SYS_INIT_L2_ADDR         0xf8f80000
  89 #ifdef CONFIG_PHYS_64BIT
  90 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    0xff8f80000ull
  91 #else
  92 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
  93 #endif
  94 #define CONFIG_SYS_L2_SIZE              (512 << 10)
  95 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
  96
  97 #define CONFIG_SYS_CCSRBAR              0xffe00000
  98 #define CONFIG_SYS_CCSRBAR_PHYS_LOW     CONFIG_SYS_CCSRBAR
  99
 100 #if defined(CONFIG_NAND_SPL)
 101 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
 102 #endif
 103
 104 /* DDR Setup */
 105 #define CONFIG_VERY_BIG_RAM
 106 #define CONFIG_SYS_FSL_DDR2
 107 #undef CONFIG_FSL_DDR_INTERACTIVE
 108 #define CONFIG_SPD_EEPROM               /* Use SPD EEPROM for DDR setup */
 109 #define CONFIG_DDR_SPD
 110
 111 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER       /* DDR controller or DMA? */
 112 #define CONFIG_MEM_INIT_VALUE   0xDeadBeef
 113
 114 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 115 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 116
 117 #define CONFIG_NUM_DDR_CONTROLLERS      1
 118 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 119 #define CONFIG_CHIP_SELECTS_PER_CTRL    2
 120
 121 /* I2C addresses of SPD EEPROMs */
 122 #define SPD_EEPROM_ADDRESS      0x51    /* CTLR 0 DIMM 0 */
 123 #define CONFIG_SYS_SPD_BUS_NUM          1
 124
 125 /* These are used when DDR doesn't use SPD. */
 126 #define CONFIG_SYS_SDRAM_SIZE           256     /* DDR is 256MB */
 127 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000001F
 128 #define CONFIG_SYS_DDR_CS0_CONFIG       0x80010102 /* Enable, no interleaving */
 129 #define CONFIG_SYS_DDR_TIMING_3 0x00000000
 130 #define CONFIG_SYS_DDR_TIMING_0 0x00260802
 131 #define CONFIG_SYS_DDR_TIMING_1 0x3935d322
 132 #define CONFIG_SYS_DDR_TIMING_2 0x14904cc8
 133 #define CONFIG_SYS_DDR_MODE_1           0x00480432
 134 #define CONFIG_SYS_DDR_MODE_2           0x00000000
 135 #define CONFIG_SYS_DDR_INTERVAL 0x06180100
 136 #define CONFIG_SYS_DDR_DATA_INIT        0xdeadbeef
 137 #define CONFIG_SYS_DDR_CLK_CTRL 0x03800000
 138 #define CONFIG_SYS_DDR_OCD_CTRL 0x00000000
 139 #define CONFIG_SYS_DDR_OCD_STATUS       0x00000000
 140 #define CONFIG_SYS_DDR_CONTROL  0xC3008000      /* Type = DDR2 */
 141 #define CONFIG_SYS_DDR_CONTROL2 0x04400010
 142
 143 #define CONFIG_SYS_DDR_ERR_INT_EN       0x0000000d
 144 #define CONFIG_SYS_DDR_ERR_DIS          0x00000000
 145 #define CONFIG_SYS_DDR_SBE              0x00010000
 146
 147 /* Make sure required options are set */
 148 #ifndef CONFIG_SPD_EEPROM
 149 #error ("CONFIG_SPD_EEPROM is required")
 150 #endif
 151
 152 #undef CONFIG_CLOCKS_IN_MHZ
 153
 154 /*
 155  * Memory map -- xxx -this is wrong, needs updating
 156  *
 157  * 0x0000_0000  0x7fff_ffff     DDR                     2G Cacheable
 158  * 0x8000_0000  0xbfff_ffff     PCI Express Mem         1G non-cacheable
 159  * 0xc000_0000  0xdfff_ffff     PCI                     512M non-cacheable
 160  * 0xe100_0000  0xe3ff_ffff     PCI IO range            4M non-cacheable
 161  *
 162  * Localbus cacheable (TBD)
 163  * 0xXXXX_XXXX  0xXXXX_XXXX     SRAM                    YZ M Cacheable
 164  *
 165  * Localbus non-cacheable
 166  * 0xe000_0000  0xe7ff_ffff     Promjet/free            128M non-cacheable
 167  * 0xe800_0000  0xefff_ffff     FLASH                   128M non-cacheable
 168  * 0xffa0_0000  0xffaf_ffff     NAND                    1M non-cacheable
 169  * 0xffdf_0000  0xffdf_7fff     PIXIS                   32K non-cacheable TLB0
 170  * 0xffd0_0000  0xffd0_3fff     L1 for stack            16K Cacheable TLB0
 171  * 0xffe0_0000  0xffef_ffff     CCSR                    1M non-cacheable
 172  */
 173
 174 /*
 175  * Local Bus Definitions
 176  */
 177 #define CONFIG_SYS_FLASH_BASE           0xe0000000      /* start of FLASH 128M */
 178 #ifdef CONFIG_PHYS_64BIT
 179 #define CONFIG_SYS_FLASH_BASE_PHYS      0xfe0000000ull
 180 #else
 181 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 182 #endif
 183
 184 #define CONFIG_FLASH_BR_PRELIM \
 185         (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000) | BR_PS_16 | BR_V)
 186 #define CONFIG_FLASH_OR_PRELIM  0xf8000ff7
 187
 188 #define CONFIG_SYS_BR1_PRELIM \
 189                 (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \
 190                  | BR_PS_16 | BR_V)
 191 #define CONFIG_SYS_OR1_PRELIM   0xf8000ff7
 192
 193 #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, \
 194                                       CONFIG_SYS_FLASH_BASE_PHYS }
 195 #define CONFIG_SYS_FLASH_QUIET_TEST
 196 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
 197
 198 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 199 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 200 #undef  CONFIG_SYS_FLASH_CHECKSUM
 201 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 202 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 203
 204 #if defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH)
 205 #define CONFIG_SYS_RAMBOOT
 206 #define CONFIG_SYS_EXTRA_ENV_RELOC
 207 #else
 208 #undef CONFIG_SYS_RAMBOOT
 209 #endif
 210
 211 #define CONFIG_FLASH_CFI_DRIVER
 212 #define CONFIG_SYS_FLASH_CFI
 213 #define CONFIG_SYS_FLASH_EMPTY_INFO
 214 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7
 215
 216 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
 217
 218 #define CONFIG_HWCONFIG                 /* enable hwconfig */
 219 #define CONFIG_FSL_PIXIS        1       /* use common PIXIS code */
 220 #define PIXIS_BASE      0xffdf0000      /* PIXIS registers */
 221 #ifdef CONFIG_PHYS_64BIT
 222 #define PIXIS_BASE_PHYS 0xfffdf0000ull
 223 #else
 224 #define PIXIS_BASE_PHYS PIXIS_BASE
 225 #endif
 226
 227 #define CONFIG_SYS_BR3_PRELIM   (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V)
 228 #define CONFIG_SYS_OR3_PRELIM   0xffffeff7      /* 32KB but only 4k mapped */
 229
 230 #define PIXIS_ID                0x0     /* Board ID at offset 0 */
 231 #define PIXIS_VER               0x1     /* Board version at offset 1 */
 232 #define PIXIS_PVER              0x2     /* PIXIS FPGA version at offset 2 */
 233 #define PIXIS_CSR               0x3     /* PIXIS General control/status register */
 234 #define PIXIS_RST               0x4     /* PIXIS Reset Control register */
 235 #define PIXIS_PWR               0x5     /* PIXIS Power status register */
 236 #define PIXIS_AUX               0x6     /* Auxiliary 1 register */
 237 #define PIXIS_SPD               0x7     /* Register for SYSCLK speed */
 238 #define PIXIS_AUX2              0x8     /* Auxiliary 2 register */
 239 #define PIXIS_VCTL              0x10    /* VELA Control Register */
 240 #define PIXIS_VSTAT             0x11    /* VELA Status Register */
 241 #define PIXIS_VCFGEN0           0x12    /* VELA Config Enable 0 */
 242 #define PIXIS_VCFGEN1           0x13    /* VELA Config Enable 1 */
 243 #define PIXIS_VCORE0            0x14    /* VELA VCORE0 Register */
 244 #define PIXIS_VBOOT             0x16    /* VELA VBOOT Register */
 245 #define PIXIS_VBOOT_LBMAP       0xe0    /* VBOOT - CFG_LBMAP */
 246 #define PIXIS_VBOOT_LBMAP_NOR0  0x00    /* cfg_lbmap - boot from NOR 0 */
 247 #define PIXIS_VBOOT_LBMAP_NOR1  0x01    /* cfg_lbmap - boot from NOR 1 */
 248 #define PIXIS_VBOOT_LBMAP_NOR2  0x02    /* cfg_lbmap - boot from NOR 2 */
 249 #define PIXIS_VBOOT_LBMAP_NOR3  0x03    /* cfg_lbmap - boot from NOR 3 */
 250 #define PIXIS_VBOOT_LBMAP_PJET  0x04    /* cfg_lbmap - boot from projet */
 251 #define PIXIS_VBOOT_LBMAP_NAND  0x05    /* cfg_lbmap - boot from NAND */
 252 #define PIXIS_VSPEED0           0x17    /* VELA VSpeed 0 */
 253 #define PIXIS_VSPEED1           0x18    /* VELA VSpeed 1 */
 254 #define PIXIS_VSPEED2           0x19    /* VELA VSpeed 2 */
 255 #define PIXIS_VSYSCLK0          0x1A    /* VELA SYSCLK0 Register */
 256 #define PIXIS_VSYSCLK1          0x1B    /* VELA SYSCLK1 Register */
 257 #define PIXIS_VSYSCLK2          0x1C    /* VELA SYSCLK2 Register */
 258 #define PIXIS_VDDRCLK0          0x1D    /* VELA DDRCLK0 Register */
 259 #define PIXIS_VDDRCLK1          0x1E    /* VELA DDRCLK1 Register */
 260 #define PIXIS_VDDRCLK2          0x1F    /* VELA DDRCLK2 Register */
 261 #define PIXIS_VWATCH            0x24    /* Watchdog Register */
 262 #define PIXIS_LED               0x25    /* LED Register */
 263
 264 #define PIXIS_SPD_SYSCLK        0x7     /* SYSCLK option */
 265
 266 /* old pixis referenced names */
 267 #define PIXIS_VCLKH             0x19    /* VELA VCLKH register */
 268 #define PIXIS_VCLKL             0x1A    /* VELA VCLKL register */
 269 #define CONFIG_SYS_PIXIS_VBOOT_MASK     0x4e
 270
 271 #define CONFIG_SYS_INIT_RAM_LOCK        1
 272 #define CONFIG_SYS_INIT_RAM_ADDR        0xffd00000      /* Initial L1 address */
 273 #define CONFIG_SYS_INIT_RAM_SIZE        0x00004000      /* Size of used area in RAM */
 274
 275 #define CONFIG_SYS_GBL_DATA_OFFSET \
 276                 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 277 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 278
 279 #define CONFIG_SYS_MONITOR_LEN  (256 * 1024) /* Reserve 256 kB for Mon */
 280 #define CONFIG_SYS_MALLOC_LEN   (1024 * 1024)   /* Reserved for malloc */
 281
 282 #ifndef CONFIG_NAND_SPL
 283 #define CONFIG_SYS_NAND_BASE            0xffa00000
 284 #ifdef CONFIG_PHYS_64BIT
 285 #define CONFIG_SYS_NAND_BASE_PHYS       0xfffa00000ull
 286 #else
 287 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 288 #endif
 289 #else
 290 #define CONFIG_SYS_NAND_BASE            0xfff00000
 291 #ifdef CONFIG_PHYS_64BIT
 292 #define CONFIG_SYS_NAND_BASE_PHYS       0xffff00000ull
 293 #else
 294 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 295 #endif
 296 #endif
 297 #define CONFIG_SYS_NAND_BASE_LIST     { CONFIG_SYS_NAND_BASE,\
 298                                 CONFIG_SYS_NAND_BASE + 0x40000, \
 299                                 CONFIG_SYS_NAND_BASE + 0x80000, \
 300                                 CONFIG_SYS_NAND_BASE + 0xC0000}
 301 #define CONFIG_SYS_MAX_NAND_DEVICE      4
 302 #define CONFIG_CMD_NAND         1
 303 #define CONFIG_NAND_FSL_ELBC    1
 304 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 305
 306 /* NAND boot: 4K NAND loader config */
 307 #define CONFIG_SYS_NAND_SPL_SIZE        0x1000
 308 #define CONFIG_SYS_NAND_U_BOOT_SIZE     ((768 << 10) - 0x2000)
 309 #define CONFIG_SYS_NAND_U_BOOT_DST      (CONFIG_SYS_INIT_L2_ADDR)
 310 #define CONFIG_SYS_NAND_U_BOOT_START \
 311                 (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_NAND_SPL_SIZE)
 312 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (0)
 313 #define CONFIG_SYS_NAND_U_BOOT_RELOC    (CONFIG_SYS_INIT_L2_END - 0x2000)
 314 #define CONFIG_SYS_NAND_U_BOOT_RELOC_SP ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF)
 315
 316 /* NAND flash config */
 317 #define CONFIG_SYS_NAND_BR_PRELIM \
 318                 (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 319                 | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 320                 | BR_PS_8               /* Port Size = 8 bit */ \
 321                 | BR_MS_FCM             /* MSEL = FCM */ \
 322                 | BR_V)                 /* valid */
 323 #define CONFIG_SYS_NAND_OR_PRELIM       (0xFFFC0000     /* length 256K */ \
 324                 | OR_FCM_PGS            /* Large Page*/ \
 325                 | OR_FCM_CSCT \
 326                 | OR_FCM_CST \
 327                 | OR_FCM_CHT \
 328                 | OR_FCM_SCY_1 \
 329                 | OR_FCM_TRLX \
 330                 | OR_FCM_EHTR)
 331
 332 #define CONFIG_SYS_BR0_PRELIM  CONFIG_FLASH_BR_PRELIM   /* NOR Base Address */
 333 #define CONFIG_SYS_OR0_PRELIM  CONFIG_FLASH_OR_PRELIM   /* NOR Options */
 334 #define CONFIG_SYS_BR2_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 335 #define CONFIG_SYS_OR2_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 336
 337 #define CONFIG_SYS_BR4_PRELIM \
 338                 (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0x40000) \
 339                 | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 340                 | BR_PS_8               /* Port Size = 8 bit */ \
 341                 | BR_MS_FCM             /* MSEL = FCM */ \
 342                 | BR_V)                 /* valid */
 343 #define CONFIG_SYS_OR4_PRELIM   CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 344 #define CONFIG_SYS_BR5_PRELIM \
 345                 (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0x80000) \
 346                 | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 347                 | BR_PS_8               /* Port Size = 8 bit */ \
 348                 | BR_MS_FCM             /* MSEL = FCM */ \
 349                 | BR_V)                 /* valid */
 350 #define CONFIG_SYS_OR5_PRELIM   CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 351
 352 #define CONFIG_SYS_BR6_PRELIM \
 353                 (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0xc0000) \
 354                 | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 355                 | BR_PS_8               /* Port Size = 8 bit */ \
 356                 | BR_MS_FCM             /* MSEL = FCM */ \
 357                 | BR_V)                 /* valid */
 358 #define CONFIG_SYS_OR6_PRELIM   CONFIG_SYS_NAND_OR_PRELIM       /* NAND Options */
 359
 360 /* Serial Port - controlled on board with jumper J8
 361  * open - index 2
 362  * shorted - index 1
 363  */
 364 #define CONFIG_CONS_INDEX       1
 365 #define CONFIG_SYS_NS16550_SERIAL
 366 #define CONFIG_SYS_NS16550_REG_SIZE     1
 367 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 368 #ifdef CONFIG_NAND_SPL
 369 #define CONFIG_NS16550_MIN_FUNCTIONS
 370 #endif
 371
 372 #define CONFIG_SYS_BAUDRATE_TABLE       \
 373         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 374
 375 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR + 0x4500)
 376 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR + 0x4600)
 377
 378 /*
 379  * I2C
 380  */
 381 #define CONFIG_SYS_I2C
 382 #define CONFIG_SYS_I2C_FSL
 383 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 384 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 385 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 386 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 387 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 388 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x3100
 389 #define CONFIG_SYS_I2C_NOPROBES         { {0, 0x29} }
 390
 391 /*
 392  * I2C2 EEPROM
 393  */
 394 #define CONFIG_ID_EEPROM
 395 #ifdef CONFIG_ID_EEPROM
 396 #define CONFIG_SYS_I2C_EEPROM_NXID
 397 #endif
 398 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 399 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 400 #define CONFIG_SYS_EEPROM_BUS_NUM       1
 401
 402 /*
 403  * eSPI - Enhanced SPI
 404  */
 405 #define CONFIG_HARD_SPI
 406
 407 #if defined(CONFIG_SPI_FLASH)
 408 #define CONFIG_SF_DEFAULT_SPEED 10000000
 409 #define CONFIG_SF_DEFAULT_MODE  0
 410 #endif
 411
 412 /*
 413  * General PCI
 414  * Memory space is mapped 1-1, but I/O space must start from 0.
 415  */
 416
 417 #define CONFIG_SYS_PCI1_MEM_VIRT        0x80000000
 418 #ifdef CONFIG_PHYS_64BIT
 419 #define CONFIG_SYS_PCI1_MEM_BUS         0xf0000000
 420 #define CONFIG_SYS_PCI1_MEM_PHYS        0xc00000000ull
 421 #else
 422 #define CONFIG_SYS_PCI1_MEM_BUS         0x80000000
 423 #define CONFIG_SYS_PCI1_MEM_PHYS        0x80000000
 424 #endif
 425 #define CONFIG_SYS_PCI1_MEM_SIZE        0x10000000      /* 256M */
 426 #define CONFIG_SYS_PCI1_IO_VIRT         0xffc00000
 427 #define CONFIG_SYS_PCI1_IO_BUS          0x00000000
 428 #ifdef CONFIG_PHYS_64BIT
 429 #define CONFIG_SYS_PCI1_IO_PHYS         0xfffc00000ull
 430 #else
 431 #define CONFIG_SYS_PCI1_IO_PHYS         0xffc00000
 432 #endif
 433 #define CONFIG_SYS_PCI1_IO_SIZE         0x00010000      /* 64k */
 434
 435 /* controller 1, Slot 1, tgtid 1, Base address a000 */
 436 #define CONFIG_SYS_PCIE1_NAME           "Slot 1"
 437 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x90000000
 438 #ifdef CONFIG_PHYS_64BIT
 439 #define CONFIG_SYS_PCIE1_MEM_BUS        0xf8000000
 440 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc10000000ull
 441 #else
 442 #define CONFIG_SYS_PCIE1_MEM_BUS        0x90000000
 443 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x90000000
 444 #endif
 445 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x08000000      /* 128M */
 446 #define CONFIG_SYS_PCIE1_IO_VIRT        0xffc10000
 447 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 448 #ifdef CONFIG_PHYS_64BIT
 449 #define CONFIG_SYS_PCIE1_IO_PHYS        0xfffc10000ull
 450 #else
 451 #define CONFIG_SYS_PCIE1_IO_PHYS        0xffc10000
 452 #endif
 453 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 454
 455 /* controller 2, Slot 2, tgtid 2, Base address 9000 */
 456 #define CONFIG_SYS_PCIE2_NAME           "Slot 2"
 457 #define CONFIG_SYS_PCIE2_MEM_VIRT       0x98000000
 458 #ifdef CONFIG_PHYS_64BIT
 459 #define CONFIG_SYS_PCIE2_MEM_BUS        0xf8000000
 460 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc18000000ull
 461 #else
 462 #define CONFIG_SYS_PCIE2_MEM_BUS        0x98000000
 463 #define CONFIG_SYS_PCIE2_MEM_PHYS       0x98000000
 464 #endif
 465 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x08000000      /* 128M */
 466 #define CONFIG_SYS_PCIE2_IO_VIRT        0xffc20000
 467 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 468 #ifdef CONFIG_PHYS_64BIT
 469 #define CONFIG_SYS_PCIE2_IO_PHYS        0xfffc20000ull
 470 #else
 471 #define CONFIG_SYS_PCIE2_IO_PHYS        0xffc20000
 472 #endif
 473 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 474
 475 /* controller 3, direct to uli, tgtid 3, Base address 8000 */
 476 #define CONFIG_SYS_PCIE3_NAME           "Slot 3"
 477 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xa0000000
 478 #ifdef CONFIG_PHYS_64BIT
 479 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 480 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc20000000ull
 481 #else
 482 #define CONFIG_SYS_PCIE3_MEM_BUS        0xa0000000
 483 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xa0000000
 484 #endif
 485 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
 486 #define CONFIG_SYS_PCIE3_IO_VIRT        0xffc30000
 487 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 488 #ifdef CONFIG_PHYS_64BIT
 489 #define CONFIG_SYS_PCIE3_IO_PHYS        0xfffc30000ull
 490 #else
 491 #define CONFIG_SYS_PCIE3_IO_PHYS        0xffc30000
 492 #endif
 493 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 494
 495 #if defined(CONFIG_PCI)
 496
 497 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 498
 499 /*PCIE video card used*/
 500 #define VIDEO_IO_OFFSET         CONFIG_SYS_PCIE3_IO_VIRT
 501
 502 /*PCI video card used*/
 503 /*#define VIDEO_IO_OFFSET       CONFIG_SYS_PCI1_IO_VIRT*/
 504
 505 /* video */
 506 #define CONFIG_VIDEO
 507
 508 #if defined(CONFIG_VIDEO)
 509 #define CONFIG_BIOSEMU
 510 #define CONFIG_CFB_CONSOLE
 511 #define CONFIG_VIDEO_SW_CURSOR
 512 #define CONFIG_VGA_AS_SINGLE_DEVICE
 513 #define CONFIG_ATI_RADEON_FB
 514 #define CONFIG_VIDEO_LOGO
 515 #define CONFIG_SYS_ISA_IO_BASE_ADDRESS CONFIG_SYS_PCIE3_IO_VIRT
 516 #endif
 517
 518 #undef CONFIG_EEPRO100
 519 #undef CONFIG_TULIP
 520
 521 #ifndef CONFIG_PCI_PNP
 522         #define PCI_ENET0_IOADDR        CONFIG_SYS_PCI1_IO_BUS
 523         #define PCI_ENET0_MEMADDR       CONFIG_SYS_PCI1_IO_BUS
 524         #define PCI_IDSEL_NUMBER        0x11    /* IDSEL = AD11 */
 525 #endif
 526
 527 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 528
 529 #endif  /* CONFIG_PCI */
 530
 531 /* SATA */
 532 #define CONFIG_LIBATA
 533 #define CONFIG_FSL_SATA
 534
 535 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 536 #define CONFIG_SATA1
 537 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 538 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 539 #define CONFIG_SATA2
 540 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 541 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 542
 543 #ifdef CONFIG_FSL_SATA
 544 #define CONFIG_LBA48
 545 #define CONFIG_CMD_SATA
 546 #define CONFIG_DOS_PARTITION
 547 #endif
 548
 549 #if defined(CONFIG_TSEC_ENET)
 550
 551 #define CONFIG_MII              1       /* MII PHY management */
 552 #define CONFIG_MII_DEFAULT_TSEC 1       /* Allow unregistered phys */
 553 #define CONFIG_TSEC1    1
 554 #define CONFIG_TSEC1_NAME       "eTSEC1"
 555 #define CONFIG_TSEC3    1
 556 #define CONFIG_TSEC3_NAME       "eTSEC3"
 557
 558 #define CONFIG_FSL_SGMII_RISER  1
 559 #define SGMII_RISER_PHY_OFFSET  0x1c
 560
 561 #define TSEC1_PHY_ADDR          1       /* TSEC1 -> PHY1 */
 562 #define TSEC3_PHY_ADDR          0       /* TSEC3 -> PHY0 */
 563
 564 #define TSEC1_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 565 #define TSEC3_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 566
 567 #define TSEC1_PHYIDX            0
 568 #define TSEC3_PHYIDX            0
 569
 570 #define CONFIG_ETHPRIME         "eTSEC1"
 571
 572 #define CONFIG_PHY_GIGE         1       /* Include GbE speed/duplex detection */
 573
 574 #endif  /* CONFIG_TSEC_ENET */
 575
 576 /*
 577  * Environment
 578  */
 579
 580 #if defined(CONFIG_SYS_RAMBOOT)
 581 #if defined(CONFIG_RAMBOOT_SPIFLASH)
 582 #define CONFIG_ENV_IS_IN_SPI_FLASH
 583 #define CONFIG_ENV_SPI_BUS      0
 584 #define CONFIG_ENV_SPI_CS       0
 585 #define CONFIG_ENV_SPI_MAX_HZ   10000000
 586 #define CONFIG_ENV_SPI_MODE     0
 587 #define CONFIG_ENV_SIZE         0x2000  /* 8KB */
 588 #define CONFIG_ENV_OFFSET       0xF0000
 589 #define CONFIG_ENV_SECT_SIZE    0x10000
 590 #elif defined(CONFIG_RAMBOOT_SDCARD)
 591 #define CONFIG_ENV_IS_IN_MMC
 592 #define CONFIG_FSL_FIXED_MMC_LOCATION
 593 #define CONFIG_ENV_SIZE         0x2000
 594 #define CONFIG_SYS_MMC_ENV_DEV  0
 595 #else
 596         #define CONFIG_ENV_IS_NOWHERE   1       /* Store ENV in memory only */
 597         #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - 0x1000)
 598         #define CONFIG_ENV_SIZE         0x2000
 599 #endif
 600 #else
 601         #define CONFIG_ENV_IS_IN_FLASH  1
 602         #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 603         #define CONFIG_ENV_SIZE         0x2000
 604         #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 605 #endif
 606
 607 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download */
 608 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change */
 609
 610 /*
 611  * Command line configuration.
 612  */
 613 #define CONFIG_CMD_IRQ
 614 #define CONFIG_CMD_IRQ
 615 #define CONFIG_CMD_REGINFO
 616
 617 #if defined(CONFIG_PCI)
 618 #define CONFIG_CMD_PCI
 619 #endif
 620
 621 #undef CONFIG_WATCHDOG                  /* watchdog disabled */
 622
 623 #define CONFIG_MMC     1
 624
 625 #ifdef CONFIG_MMC
 626 #define CONFIG_FSL_ESDHC
 627 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 628 #define CONFIG_GENERIC_MMC
 629 #endif
 630
 631 /*
 632  * USB
 633  */
 634 #define CONFIG_HAS_FSL_MPH_USB
 635 #ifdef CONFIG_HAS_FSL_MPH_USB
 636 #define CONFIG_USB_EHCI
 637
 638 #ifdef CONFIG_USB_EHCI
 639 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 640 #define CONFIG_USB_EHCI_FSL
 641 #endif
 642 #endif
 643
 644 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI)
 645 #define CONFIG_DOS_PARTITION
 646 #endif
 647
 648 /*
 649  * Miscellaneous configurable options
 650  */
 651 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 652 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 653 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 654 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 655 #if defined(CONFIG_CMD_KGDB)
 656 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 657 #else
 658 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 659 #endif
 660 #define CONFIG_SYS_PBSIZE       (CONFIG_SYS_CBSIZE \
 661                 + sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buffer Size */
 662 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 663 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
 664
 665 /*
 666  * For booting Linux, the board info and command line data
 667  * have to be in the first 64 MB of memory, since this is
 668  * the maximum mapped by the Linux kernel during initialization.
 669  */
 670 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20) /* Initial Memory map for Linux */
 671 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 672
 673 #if defined(CONFIG_CMD_KGDB)
 674 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 675 #endif
 676
 677 /*
 678  * Environment Configuration
 679  */
 680
 681 /* The mac addresses for all ethernet interface */
 682 #if defined(CONFIG_TSEC_ENET)
 683 #define CONFIG_HAS_ETH0
 684 #define CONFIG_HAS_ETH1
 685 #define CONFIG_HAS_ETH2
 686 #define CONFIG_HAS_ETH3
 687 #endif
 688
 689 #define CONFIG_IPADDR           192.168.1.254
 690
 691 #define CONFIG_HOSTNAME         unknown
 692 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 693 #define CONFIG_BOOTFILE         "uImage"
 694 #define CONFIG_UBOOTPATH        u-boot.bin /* U-Boot image on TFTP server */
 695
 696 #define CONFIG_SERVERIP         192.168.1.1
 697 #define CONFIG_GATEWAYIP        192.168.1.1
 698 #define CONFIG_NETMASK          255.255.255.0
 699
 700 /* default location for tftp and bootm */
 701 #define CONFIG_LOADADDR         1000000
 702
 703 #undef  CONFIG_BOOTARGS         /* the boot command will set bootargs */
 704
 705 #define CONFIG_BAUDRATE 115200
 706
 707 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 708 "netdev=eth0\0"                                         \
 709 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"                     \
 710 "tftpflash=tftpboot $loadaddr $uboot; "                 \
 711         "protect off " __stringify(CONFIG_SYS_TEXT_BASE)        \
 712                 " +$filesize; " \
 713         "erase " __stringify(CONFIG_SYS_TEXT_BASE)              \
 714                 " +$filesize; " \
 715         "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE)     \
 716                 " $filesize; "  \
 717         "protect on " __stringify(CONFIG_SYS_TEXT_BASE)         \
 718                 " +$filesize; " \
 719         "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE)    \
 720                 " $filesize\0"  \
 721 "consoledev=ttyS0\0"                            \
 722 "ramdiskaddr=2000000\0"                 \
 723 "ramdiskfile=8536ds/ramdisk.uboot\0"            \
 724 "fdtaddr=1e00000\0"                             \
 725 "fdtfile=8536ds/mpc8536ds.dtb\0"                \
 726 "bdev=sda3\0"                                   \
 727 "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0"
 728
 729 #define CONFIG_HDBOOT                           \
 730  "setenv bootargs root=/dev/$bdev rw "          \
 731  "console=$consoledev,$baudrate $othbootargs;"  \
 732  "tftp $loadaddr $bootfile;"                    \
 733  "tftp $fdtaddr $fdtfile;"                      \
 734  "bootm $loadaddr - $fdtaddr"
 735
 736 #define CONFIG_NFSBOOTCOMMAND           \
 737  "setenv bootargs root=/dev/nfs rw "    \
 738  "nfsroot=$serverip:$rootpath "         \
 739  "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 740  "console=$consoledev,$baudrate $othbootargs;"  \
 741  "tftp $loadaddr $bootfile;"            \
 742  "tftp $fdtaddr $fdtfile;"              \
 743  "bootm $loadaddr - $fdtaddr"
 744
 745 #define CONFIG_RAMBOOTCOMMAND           \
 746  "setenv bootargs root=/dev/ram rw "    \
 747  "console=$consoledev,$baudrate $othbootargs;"  \
 748  "tftp $ramdiskaddr $ramdiskfile;"      \
 749  "tftp $loadaddr $bootfile;"            \
 750  "tftp $fdtaddr $fdtfile;"              \
 751  "bootm $loadaddr $ramdiskaddr $fdtaddr"
 752
 753 #define CONFIG_BOOTCOMMAND              CONFIG_HDBOOT
 754
 755 #endif  /* __CONFIG_H */