include/configs/MPC8544DS.h

   1 /*
   2  * Copyright 2007, 2010-2011 Freescale Semiconductor, Inc.
   3  *
   4  * See file CREDITS for list of people who contributed to this
   5  * project.
   6  *
   7  * This program is free software; you can redistribute it and/or
   8  * modify it under the terms of the GNU General Public License as
   9  * published by the Free Software Foundation; either version 2 of
  10  * the License, or (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  20  * MA 02111-1307 USA
  21  */
  22
  23 /*
  24  * mpc8544ds board configuration file
  25  *
  26  */
  27 #ifndef __CONFIG_H
  28 #define __CONFIG_H
  29
  30 /* High Level Configuration Options */
  31 #define CONFIG_BOOKE            1       /* BOOKE */
  32 #define CONFIG_E500             1       /* BOOKE e500 family */
  33 #define CONFIG_MPC85xx          1       /* MPC8540/60/55/41/48 */
  34 #define CONFIG_MPC8544          1
  35 #define CONFIG_MPC8544DS        1
  36
  37 #ifndef CONFIG_SYS_TEXT_BASE
  38 #define CONFIG_SYS_TEXT_BASE    0xfff80000
  39 #endif
  40
  41 #define CONFIG_PCI              1       /* Enable PCI/PCIE */
  42 #define CONFIG_PCI1             1       /* PCI controller 1 */
  43 #define CONFIG_PCIE1            1       /* PCIE controler 1 (slot 1) */
  44 #define CONFIG_PCIE2            1       /* PCIE controler 2 (slot 2) */
  45 #define CONFIG_PCIE3            1       /* PCIE controler 3 (ULI bridge) */
  46 #define CONFIG_FSL_PCI_INIT     1       /* Use common FSL init code */
  47 #define CONFIG_FSL_PCIE_RESET   1       /* need PCIe reset errata */
  48 #define CONFIG_SYS_PCI_64BIT    1       /* enable 64-bit PCI resources */
  49
  50 #define CONFIG_FSL_LAW          1       /* Use common FSL init code */
  51 #define CONFIG_E1000            1       /* Defind e1000 pci Ethernet card*/
  52
  53 #define CONFIG_TSEC_ENET                /* tsec ethernet support */
  54 #define CONFIG_ENV_OVERWRITE
  55 #define CONFIG_INTERRUPTS               /* enable pci, srio, ddr interrupts */
  56
  57 #ifndef __ASSEMBLY__
  58 extern unsigned long get_board_sys_clk(unsigned long dummy);
  59 #endif
  60 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk(0) /* sysclk for MPC85xx */
  61
  62 /*
  63  * These can be toggled for performance analysis, otherwise use default.
  64  */
  65 #define CONFIG_L2_CACHE                 /* toggle L2 cache */
  66 #define CONFIG_BTB                      /* toggle branch predition */
  67
  68 /*
  69  * Only possible on E500 Version 2 or newer cores.
  70  */
  71 #define CONFIG_ENABLE_36BIT_PHYS        1
  72
  73 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
  74 #define CONFIG_SYS_MEMTEST_END          0x00400000
  75 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
  76
  77 /*
  78  * Base addresses -- Note these are effective addresses where the
  79  * actual resources get mapped (not physical addresses)
  80  */
  81 #define CONFIG_SYS_CCSRBAR_DEFAULT      0xff700000      /* CCSRBAR Default */
  82 #define CONFIG_SYS_CCSRBAR              0xe0000000      /* relocated CCSRBAR */
  83 #define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR      /* physical addr of CCSRBAR */
  84 #define CONFIG_SYS_IMMR         CONFIG_SYS_CCSRBAR      /* PQII uses CONFIG_SYS_IMMR */
  85
  86 /* DDR Setup */
  87 #define CONFIG_FSL_DDR2
  88 #undef CONFIG_FSL_DDR_INTERACTIVE
  89 #define CONFIG_SPD_EEPROM               /* Use SPD EEPROM for DDR setup */
  90 #define CONFIG_DDR_SPD
  91
  92 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER       /* DDR controller or DMA? */
  93 #define CONFIG_MEM_INIT_VALUE   0xDeadBeef
  94
  95 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
  96 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  97 #define CONFIG_VERY_BIG_RAM
  98
  99 #define CONFIG_NUM_DDR_CONTROLLERS      1
 100 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 101 #define CONFIG_CHIP_SELECTS_PER_CTRL    2
 102
 103 /* I2C addresses of SPD EEPROMs */
 104 #define SPD_EEPROM_ADDRESS      0x51            /* DDR DIMM */
 105
 106 /* Make sure required options are set */
 107 #ifndef CONFIG_SPD_EEPROM
 108 #error ("CONFIG_SPD_EEPROM is required")
 109 #endif
 110
 111 #undef CONFIG_CLOCKS_IN_MHZ
 112
 113 /*
 114  * Memory map
 115  *
 116  * 0x0000_0000  0x7fff_ffff     DDR                     2G Cacheable
 117  *
 118  * 0x8000_0000  0xbfff_ffff     PCI Express Mem         1G non-cacheable
 119  *
 120  * 0xc000_0000  0xdfff_ffff     PCI                     512M non-cacheable
 121  *
 122  * 0xe000_0000  0xe00f_ffff     CCSR                    1M non-cacheable
 123  * 0xe100_0000  0xe3ff_ffff     PCI IO range            4M non-cacheable
 124  *
 125  * Localbus cacheable
 126  *
 127  * 0xf000_0000  0xf3ff_ffff     SDRAM                   64M Cacheable
 128  * 0xf401_0000  0xf401_3fff     L1 for stack            4K Cacheable TLB0
 129  *
 130  * Localbus non-cacheable
 131  *
 132  * 0xf800_0000  0xf80f_ffff     NVRAM/CADMUS (*)        1M non-cacheable
 133  * 0xff00_0000  0xff7f_ffff     FLASH (2nd bank)        8M non-cacheable
 134  * 0xff80_0000  0xffff_ffff     FLASH (boot bank)       8M non-cacheable
 135  *
 136  */
 137
 138 /*
 139  * Local Bus Definitions
 140  */
 141 #define CONFIG_SYS_BOOT_BLOCK           0xfc000000      /* boot TLB */
 142
 143 #define CONFIG_SYS_FLASH_BASE           0xff800000      /* start of FLASH 8M */
 144
 145 #define CONFIG_SYS_BR0_PRELIM           0xff801001
 146 #define CONFIG_SYS_BR1_PRELIM           0xfe801001
 147
 148 #define CONFIG_SYS_OR0_PRELIM           0xff806e65
 149 #define CONFIG_SYS_OR1_PRELIM           0xff806e65
 150
 151 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE}
 152
 153 #define CONFIG_SYS_FLASH_QUIET_TEST
 154 #define CONFIG_SYS_MAX_FLASH_BANKS      1               /* number of banks */
 155 #define CONFIG_SYS_MAX_FLASH_SECT       128             /* sectors per device */
 156 #undef  CONFIG_SYS_FLASH_CHECKSUM
 157 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000           /* Flash Erase Timeout (ms) */
 158 #define CONFIG_SYS_FLASH_WRITE_TOUT     500             /* Flash Write Timeout (ms) */
 159 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
 160
 161 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 162
 163 #define CONFIG_FLASH_CFI_DRIVER
 164 #define CONFIG_SYS_FLASH_CFI
 165 #define CONFIG_SYS_FLASH_EMPTY_INFO
 166
 167 #define CONFIG_SYS_LBC_NONCACHE_BASE    0xf8000000
 168
 169 #define CONFIG_SYS_BR2_PRELIM           0xf8201001      /* port size 16bit */
 170 #define CONFIG_SYS_OR2_PRELIM           0xfff06ff7      /* 1MB Compact Flash area*/
 171
 172 #define CONFIG_SYS_BR3_PRELIM           0xf8100801      /* port size 8bit */
 173 #define CONFIG_SYS_OR3_PRELIM           0xfff06ff7      /* 1MB PIXIS area*/
 174
 175 #define CONFIG_FSL_PIXIS        1       /* use common PIXIS code */
 176 #define PIXIS_BASE      0xf8100000      /* PIXIS registers */
 177 #define PIXIS_ID                0x0     /* Board ID at offset 0 */
 178 #define PIXIS_VER               0x1     /* Board version at offset 1 */
 179 #define PIXIS_PVER              0x2     /* PIXIS FPGA version at offset 2 */
 180 #define PIXIS_RST               0x4     /* PIXIS Reset Control register */
 181 #define PIXIS_AUX               0x6     /* PIXIS Auxiliary register; Scratch
 182                                          * register */
 183 #define PIXIS_SPD               0x7     /* Register for SYSCLK speed */
 184 #define PIXIS_VCTL              0x10    /* VELA Control Register */
 185 #define PIXIS_VCFGEN0           0x12    /* VELA Config Enable 0 */
 186 #define PIXIS_VCFGEN1           0x13    /* VELA Config Enable 1 */
 187 #define PIXIS_VBOOT             0x16    /* VELA VBOOT Register */
 188 #define PIXIS_VBOOT_FMAP        0x80    /* VBOOT - CFG_FLASHMAP */
 189 #define PIXIS_VBOOT_FBANK       0x40    /* VBOOT - CFG_FLASHBANK */
 190 #define PIXIS_VSPEED0           0x17    /* VELA VSpeed 0 */
 191 #define PIXIS_VSPEED1           0x18    /* VELA VSpeed 1 */
 192 #define PIXIS_VCLKH             0x19    /* VELA VCLKH register */
 193 #define PIXIS_VCLKL             0x1A    /* VELA VCLKL register */
 194 #define PIXIS_VSPEED2           0x1d    /* VELA VSpeed 2 */
 195 #define CONFIG_SYS_PIXIS_VBOOT_MASK     0x40    /* Reset altbank mask*/
 196 #define PIXIS_VSPEED2_TSEC1SER  0x2
 197 #define PIXIS_VSPEED2_TSEC3SER  0x1
 198 #define PIXIS_VCFGEN1_TSEC1SER  0x20
 199 #define PIXIS_VCFGEN1_TSEC3SER  0x40
 200 #define PIXIS_VSPEED2_MASK      (PIXIS_VSPEED2_TSEC1SER|PIXIS_VSPEED2_TSEC3SER)
 201 #define PIXIS_VCFGEN1_MASK      (PIXIS_VCFGEN1_TSEC1SER|PIXIS_VCFGEN1_TSEC3SER)
 202
 203
 204 #define CONFIG_SYS_INIT_RAM_LOCK      1
 205 #define CONFIG_SYS_INIT_RAM_ADDR      0xf4010000      /* Initial L1 address */
 206 #define CONFIG_SYS_INIT_RAM_SIZE       0x00004000      /* Size of used area in RAM */
 207
 208
 209 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 210 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 211
 212 #define CONFIG_SYS_MONITOR_LEN          (256 * 1024) /* Reserve 256 kB for Mon */
 213 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)   /* Reserved for malloc */
 214
 215 /* Serial Port - controlled on board with jumper J8
 216  * open - index 2
 217  * shorted - index 1
 218  */
 219 #define CONFIG_CONS_INDEX       1
 220 #define CONFIG_SYS_NS16550
 221 #define CONFIG_SYS_NS16550_SERIAL
 222 #define CONFIG_SYS_NS16550_REG_SIZE     1
 223 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 224
 225 #define CONFIG_SYS_BAUDRATE_TABLE       \
 226         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 227
 228 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
 229 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
 230
 231 /* Use the HUSH parser */
 232 #define CONFIG_SYS_HUSH_PARSER
 233 #ifdef  CONFIG_SYS_HUSH_PARSER
 234 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 235 #endif
 236
 237 /* pass open firmware flat tree */
 238 #define CONFIG_OF_LIBFDT                1
 239 #define CONFIG_OF_BOARD_SETUP           1
 240 #define CONFIG_OF_STDOUT_VIA_ALIAS      1
 241
 242 /* I2C */
 243 #define CONFIG_FSL_I2C          /* Use FSL common I2C driver */
 244 #define CONFIG_HARD_I2C         /* I2C with hardware support */
 245 #undef  CONFIG_SOFT_I2C         /* I2C bit-banged */
 246 #define CONFIG_SYS_I2C_SPEED            400000  /* I2C speed and slave address */
 247 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 248 #define CONFIG_SYS_I2C_SLAVE            0x7F
 249 #define CONFIG_SYS_I2C_NOPROBES {0x69}  /* Don't probe these addrs */
 250 #define CONFIG_SYS_I2C_OFFSET           0x3100
 251
 252 /*
 253  * General PCI
 254  * Memory space is mapped 1-1, but I/O space must start from 0.
 255  */
 256 #define CONFIG_SYS_PCIE_VIRT            0x80000000      /* 1G PCIE TLB */
 257 #define CONFIG_SYS_PCIE_PHYS            0x80000000      /* 1G PCIE TLB */
 258 #define CONFIG_SYS_PCI_VIRT             0xc0000000      /* 512M PCI TLB */
 259 #define CONFIG_SYS_PCI_PHYS             0xc0000000      /* 512M PCI TLB */
 260
 261 #define CONFIG_SYS_PCI1_MEM_VIRT        0xc0000000
 262 #define CONFIG_SYS_PCI1_MEM_BUS 0xc0000000
 263 #define CONFIG_SYS_PCI1_MEM_PHYS        0xc0000000
 264 #define CONFIG_SYS_PCI1_MEM_SIZE        0x20000000      /* 512M */
 265 #define CONFIG_SYS_PCI1_IO_VIRT 0xe1000000
 266 #define CONFIG_SYS_PCI1_IO_BUS  0x00000000
 267 #define CONFIG_SYS_PCI1_IO_PHYS 0xe1000000
 268 #define CONFIG_SYS_PCI1_IO_SIZE 0x00010000      /* 64k */
 269
 270 /* controller 2, Slot 1, tgtid 1, Base address 9000 */
 271 #define CONFIG_SYS_PCIE2_NAME           "Slot 1"
 272 #define CONFIG_SYS_PCIE2_MEM_VIRT       0x80000000
 273 #define CONFIG_SYS_PCIE2_MEM_BUS        0x80000000
 274 #define CONFIG_SYS_PCIE2_MEM_PHYS       0x80000000
 275 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 276 #define CONFIG_SYS_PCIE2_IO_VIRT        0xe1010000
 277 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000
 278 #define CONFIG_SYS_PCIE2_IO_PHYS        0xe1010000
 279 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 280
 281 /* controller 1, Slot 2,tgtid 2, Base address a000 */
 282 #define CONFIG_SYS_PCIE1_NAME           "Slot 2"
 283 #define CONFIG_SYS_PCIE1_MEM_VIRT       0xa0000000
 284 #define CONFIG_SYS_PCIE1_MEM_BUS        0xa0000000
 285 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xa0000000
 286 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000      /* 256M */
 287 #define CONFIG_SYS_PCIE1_IO_VIRT        0xe1020000
 288 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
 289 #define CONFIG_SYS_PCIE1_IO_PHYS        0xe1020000
 290 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 291
 292 /* controller 3, direct to uli, tgtid 3, Base address b000 */
 293 #define CONFIG_SYS_PCIE3_NAME           "ULI"
 294 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xb0000000
 295 #define CONFIG_SYS_PCIE3_MEM_BUS        0xb0000000
 296 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xb0000000
 297 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x00100000      /* 1M */
 298 #define CONFIG_SYS_PCIE3_IO_VIRT        0xb0100000      /* reuse mem LAW */
 299 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000
 300 #define CONFIG_SYS_PCIE3_IO_PHYS        0xb0100000      /* reuse mem LAW */
 301 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00100000      /* 1M */
 302 #define CONFIG_SYS_PCIE3_MEM_VIRT2      0xb0200000
 303 #define CONFIG_SYS_PCIE3_MEM_BUS2       0xb0200000
 304 #define CONFIG_SYS_PCIE3_MEM_PHYS2      0xb0200000
 305 #define CONFIG_SYS_PCIE3_MEM_SIZE2      0x00200000      /* 1M */
 306
 307 #if defined(CONFIG_PCI)
 308
 309 /*PCIE video card used*/
 310 #define VIDEO_IO_OFFSET         CONFIG_SYS_PCIE2_IO_VIRT
 311
 312 /*PCI video card used*/
 313 /*#define VIDEO_IO_OFFSET       CONFIG_SYS_PCI1_IO_VIRT*/
 314
 315 /* video */
 316 #define CONFIG_VIDEO
 317
 318 #if defined(CONFIG_VIDEO)
 319 #define CONFIG_BIOSEMU
 320 #define CONFIG_CFB_CONSOLE
 321 #define CONFIG_VIDEO_SW_CURSOR
 322 #define CONFIG_VGA_AS_SINGLE_DEVICE
 323 #define CONFIG_ATI_RADEON_FB
 324 #define CONFIG_VIDEO_LOGO
 325 /*#define CONFIG_CONSOLE_CURSOR*/
 326 #define CONFIG_SYS_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET
 327 #endif
 328
 329 #define CONFIG_NET_MULTI
 330 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 331
 332 #undef CONFIG_EEPRO100
 333 #undef CONFIG_TULIP
 334 #define CONFIG_RTL8139
 335
 336 #ifndef CONFIG_PCI_PNP
 337         #define PCI_ENET0_IOADDR        CONFIG_SYS_PCI1_IO_BUS
 338         #define PCI_ENET0_MEMADDR       CONFIG_SYS_PCI1_IO_BUS
 339         #define PCI_IDSEL_NUMBER        0x11    /* IDSEL = AD11 */
 340 #endif
 341
 342 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 343 #define CONFIG_DOS_PARTITION
 344 #define CONFIG_SCSI_AHCI
 345
 346 #ifdef CONFIG_SCSI_AHCI
 347 #define CONFIG_SATA_ULI5288
 348 #define CONFIG_SYS_SCSI_MAX_SCSI_ID     4
 349 #define CONFIG_SYS_SCSI_MAX_LUN 1
 350 #define CONFIG_SYS_SCSI_MAX_DEVICE      (CONFIG_SYS_SCSI_MAX_SCSI_ID * CONFIG_SYS_SCSI_MAX_LUN)
 351 #define CONFIG_SYS_SCSI_MAXDEVICE       CONFIG_SYS_SCSI_MAX_DEVICE
 352 #endif /* SCSCI */
 353
 354 #endif  /* CONFIG_PCI */
 355
 356
 357 #if defined(CONFIG_TSEC_ENET)
 358
 359 #ifndef CONFIG_NET_MULTI
 360 #define CONFIG_NET_MULTI        1
 361 #endif
 362
 363 #define CONFIG_MII              1       /* MII PHY management */
 364 #define CONFIG_MII_DEFAULT_TSEC 1       /* Allow unregistered phys */
 365 #define CONFIG_TSEC1    1
 366 #define CONFIG_TSEC1_NAME       "eTSEC1"
 367 #define CONFIG_TSEC3    1
 368 #define CONFIG_TSEC3_NAME       "eTSEC3"
 369
 370 #define CONFIG_PIXIS_SGMII_CMD
 371 #define CONFIG_FSL_SGMII_RISER  1
 372 #define SGMII_RISER_PHY_OFFSET  0x1c
 373
 374 #define TSEC1_PHY_ADDR          0
 375 #define TSEC3_PHY_ADDR          1
 376
 377 #define TSEC1_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 378 #define TSEC3_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 379
 380 #define TSEC1_PHYIDX            0
 381 #define TSEC3_PHYIDX            0
 382
 383 #define CONFIG_ETHPRIME         "eTSEC1"
 384
 385 #define CONFIG_PHY_GIGE         1       /* Include GbE speed/duplex detection */
 386 #endif  /* CONFIG_TSEC_ENET */
 387
 388 /*
 389  * Environment
 390  */
 391 #define CONFIG_ENV_IS_IN_FLASH  1
 392 #if CONFIG_SYS_MONITOR_BASE > 0xfff80000
 393 #define CONFIG_ENV_ADDR         0xfff80000
 394 #else
 395 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE + 0x70000)
 396 #endif
 397 #define CONFIG_ENV_SIZE         0x2000
 398 #define CONFIG_ENV_SECT_SIZE    0x10000 /* 64K (one sector) */
 399
 400 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download */
 401 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change */
 402
 403 /*
 404  * BOOTP options
 405  */
 406 #define CONFIG_BOOTP_BOOTFILESIZE
 407 #define CONFIG_BOOTP_BOOTPATH
 408 #define CONFIG_BOOTP_GATEWAY
 409 #define CONFIG_BOOTP_HOSTNAME
 410
 411
 412 /*
 413  * Command line configuration.
 414  */
 415 #include <config_cmd_default.h>
 416
 417 #define CONFIG_CMD_PING
 418 #define CONFIG_CMD_I2C
 419 #define CONFIG_CMD_MII
 420 #define CONFIG_CMD_ELF
 421 #define CONFIG_CMD_IRQ
 422 #define CONFIG_CMD_SETEXPR
 423 #define CONFIG_CMD_REGINFO
 424
 425 #if defined(CONFIG_PCI)
 426     #define CONFIG_CMD_PCI
 427     #define CONFIG_CMD_NET
 428     #define CONFIG_CMD_SCSI
 429     #define CONFIG_CMD_EXT2
 430 #endif
 431
 432
 433 #undef CONFIG_WATCHDOG                  /* watchdog disabled */
 434
 435 /*
 436  * Miscellaneous configurable options
 437  */
 438 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 439 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 440 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 441 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 442 #define CONFIG_SYS_PROMPT       "=> "           /* Monitor Command Prompt */
 443 #if defined(CONFIG_CMD_KGDB)
 444 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 445 #else
 446 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 447 #endif
 448 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 449 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 450 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
 451 #define CONFIG_SYS_HZ           1000            /* decrementer freq: 1ms ticks */
 452
 453 /*
 454  * For booting Linux, the board info and command line data
 455  * have to be in the first 64 MB of memory, since this is
 456  * the maximum mapped by the Linux kernel during initialization.
 457  */
 458 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial Memory map for Linux*/
 459 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 460
 461 #if defined(CONFIG_CMD_KGDB)
 462 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 463 #define CONFIG_KGDB_SER_INDEX   2       /* which serial port to use */
 464 #endif
 465
 466 /*
 467  * Environment Configuration
 468  */
 469
 470 /* The mac addresses for all ethernet interface */
 471 #if defined(CONFIG_TSEC_ENET)
 472 #define CONFIG_HAS_ETH0
 473 #define CONFIG_ETHADDR  00:E0:0C:02:00:FD
 474 #define CONFIG_HAS_ETH1
 475 #define CONFIG_ETH1ADDR 00:E0:0C:02:01:FD
 476 #endif
 477
 478 #define CONFIG_IPADDR   192.168.1.251
 479
 480 #define CONFIG_HOSTNAME 8544ds_unknown
 481 #define CONFIG_ROOTPATH /nfs/mpc85xx
 482 #define CONFIG_BOOTFILE 8544ds/uImage.uboot
 483 #define CONFIG_UBOOTPATH        8544ds/u-boot.bin       /* TFTP server */
 484
 485 #define CONFIG_SERVERIP 192.168.1.1
 486 #define CONFIG_GATEWAYIP 192.168.1.1
 487 #define CONFIG_NETMASK  255.255.0.0
 488
 489 #define CONFIG_LOADADDR 1000000 /*default location for tftp and bootm*/
 490
 491 #define CONFIG_BOOTDELAY 10     /* -1 disables auto-boot */
 492 #undef  CONFIG_BOOTARGS         /* the boot command will set bootargs*/
 493
 494 #define CONFIG_BAUDRATE 115200
 495
 496 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 497  "netdev=eth0\0"                                                \
 498  "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0"                         \
 499  "tftpflash=tftpboot $loadaddr $uboot; "                        \
 500         "protect off " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "     \
 501         "erase " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "           \
 502         "cp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize; "   \
 503         "protect on " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "              \
 504         "cmp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize\0"  \
 505  "consoledev=ttyS0\0"                           \
 506  "ramdiskaddr=2000000\0"                        \
 507  "ramdiskfile=8544ds/ramdisk.uboot\0"           \
 508  "fdtaddr=c00000\0"                             \
 509  "fdtfile=8544ds/mpc8544ds.dtb\0"               \
 510  "bdev=sda3\0"
 511
 512 #define CONFIG_NFSBOOTCOMMAND           \
 513  "setenv bootargs root=/dev/nfs rw "    \
 514  "nfsroot=$serverip:$rootpath "         \
 515  "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 516  "console=$consoledev,$baudrate $othbootargs;"  \
 517  "tftp $loadaddr $bootfile;"            \
 518  "tftp $fdtaddr $fdtfile;"              \
 519  "bootm $loadaddr - $fdtaddr"
 520
 521 #define CONFIG_RAMBOOTCOMMAND           \
 522  "setenv bootargs root=/dev/ram rw "    \
 523  "console=$consoledev,$baudrate $othbootargs;"  \
 524  "tftp $ramdiskaddr $ramdiskfile;"      \
 525  "tftp $loadaddr $bootfile;"            \
 526  "tftp $fdtaddr $fdtfile;"              \
 527  "bootm $loadaddr $ramdiskaddr $fdtaddr"
 528
 529 #define CONFIG_BOOTCOMMAND              \
 530  "setenv bootargs root=/dev/$bdev rw "  \
 531  "console=$consoledev,$baudrate $othbootargs;"  \
 532  "tftp $loadaddr $bootfile;"            \
 533  "tftp $fdtaddr $fdtfile;"              \
 534  "bootm $loadaddr - $fdtaddr"
 535
 536 #endif  /* __CONFIG_H */