include/configs/MPC8548CDS.h

   1 /*
   2  * Copyright 2004, 2007, 2010-2011 Freescale Semiconductor.
   3  *
   4  * See file CREDITS for list of people who contributed to this
   5  * project.
   6  *
   7  * This program is free software; you can redistribute it and/or
   8  * modify it under the terms of the GNU General Public License as
   9  * published by the Free Software Foundation; either version 2 of
  10  * the License, or (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  20  * MA 02111-1307 USA
  21  */
  22
  23 /*
  24  * mpc8548cds board configuration file
  25  *
  26  * Please refer to doc/README.mpc85xxcds for more info.
  27  *
  28  */
  29 #ifndef __CONFIG_H
  30 #define __CONFIG_H
  31
  32 #ifdef CONFIG_36BIT
  33 #define CONFIG_PHYS_64BIT
  34 #endif
  35
  36 /* High Level Configuration Options */
  37 #define CONFIG_BOOKE            1       /* BOOKE */
  38 #define CONFIG_E500             1       /* BOOKE e500 family */
  39 #define CONFIG_MPC85xx          1       /* MPC8540/60/55/41/48 */
  40 #define CONFIG_MPC8548          1       /* MPC8548 specific */
  41 #define CONFIG_MPC8548CDS       1       /* MPC8548CDS board specific */
  42
  43 #ifndef CONFIG_SYS_TEXT_BASE
  44 #define CONFIG_SYS_TEXT_BASE    0xfff80000
  45 #endif
  46
  47 #define CONFIG_SYS_SRIO
  48 #define CONFIG_SRIO1                    /* SRIO port 1 */
  49
  50 #define CONFIG_PCI              /* enable any pci type devices */
  51 #define CONFIG_PCI1             /* PCI controller 1 */
  52 #define CONFIG_PCIE1            /* PCIE controler 1 (slot 1) */
  53 #undef CONFIG_PCI2
  54 #define CONFIG_FSL_PCI_INIT     1       /* Use common FSL init code */
  55 #define CONFIG_FSL_PCIE_RESET   1       /* need PCIe reset errata */
  56 #define CONFIG_SYS_PCI_64BIT    1       /* enable 64-bit PCI resources */
  57
  58 #define CONFIG_TSEC_ENET                /* tsec ethernet support */
  59 #define CONFIG_ENV_OVERWRITE
  60 #define CONFIG_INTERRUPTS               /* enable pci, srio, ddr interrupts */
  61 #define CONFIG_FSL_LAW          1       /* Use common FSL init code */
  62
  63 #define CONFIG_FSL_VIA
  64
  65 #ifndef __ASSEMBLY__
  66 extern unsigned long get_clock_freq(void);
  67 #endif
  68 #define CONFIG_SYS_CLK_FREQ     get_clock_freq() /* sysclk for MPC85xx */
  69
  70 /*
  71  * These can be toggled for performance analysis, otherwise use default.
  72  */
  73 #define CONFIG_L2_CACHE                 /* toggle L2 cache */
  74 #define CONFIG_BTB                      /* toggle branch predition */
  75
  76 /*
  77  * Only possible on E500 Version 2 or newer cores.
  78  */
  79 #define CONFIG_ENABLE_36BIT_PHYS        1
  80
  81 #ifdef CONFIG_PHYS_64BIT
  82 #define CONFIG_ADDR_MAP
  83 #define CONFIG_SYS_NUM_ADDR_MAP         16      /* number of TLB1 entries */
  84 #endif
  85
  86 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
  87 #define CONFIG_SYS_MEMTEST_END          0x00400000
  88
  89 #define CONFIG_SYS_CCSRBAR              0xe0000000
  90 #define CONFIG_SYS_CCSRBAR_PHYS_LOW     CONFIG_SYS_CCSRBAR
  91
  92 /* DDR Setup */
  93 #define CONFIG_FSL_DDR2
  94 #undef CONFIG_FSL_DDR_INTERACTIVE
  95 #define CONFIG_SPD_EEPROM               /* Use SPD EEPROM for DDR setup*/
  96 #define CONFIG_DDR_SPD
  97
  98 #define CONFIG_DDR_ECC
  99 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER       /* DDR controller or DMA? */
 100 #define CONFIG_MEM_INIT_VALUE   0xDeadBeef
 101
 102 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000      /* DDR is system memory*/
 103 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 104
 105 #define CONFIG_NUM_DDR_CONTROLLERS      1
 106 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 107 #define CONFIG_CHIP_SELECTS_PER_CTRL    (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
 108
 109 /* I2C addresses of SPD EEPROMs */
 110 #define SPD_EEPROM_ADDRESS      0x51    /* CTLR 0 DIMM 0 */
 111
 112 /* Make sure required options are set */
 113 #ifndef CONFIG_SPD_EEPROM
 114 #error ("CONFIG_SPD_EEPROM is required")
 115 #endif
 116
 117 #undef CONFIG_CLOCKS_IN_MHZ
 118 /*
 119  * Physical Address Map
 120  *
 121  * 32bit:
 122  * 0x0000_0000  0x7fff_ffff     DDR                     2G      cacheable
 123  * 0x8000_0000  0x9fff_ffff     PCI1 MEM                512M    cacheable
 124  * 0xa000_0000  0xbfff_ffff     PCIe MEM                512M    cacheable
 125  * 0xc000_0000  0xdfff_ffff     RapidIO                 512M    cacheable
 126  * 0xe000_0000  0xe00f_ffff     CCSR                    1M      non-cacheable
 127  * 0xe200_0000  0xe20f_ffff     PCI1 IO                 1M      non-cacheable
 128  * 0xe300_0000  0xe30f_ffff     PCIe IO                 1M      non-cacheable
 129  * 0xf000_0000  0xf3ff_ffff     SDRAM                   64M     cacheable
 130  * 0xf800_0000  0xf80f_ffff     NVRAM/CADMUS            1M      non-cacheable
 131  * 0xff00_0000  0xff7f_ffff     FLASH (2nd bank)        8M      non-cacheable
 132  * 0xff80_0000  0xffff_ffff     FLASH (boot bank)       8M      non-cacheable
 133  *
 134  * 36bit:
 135  * 0x00000_0000 0x07fff_ffff    DDR                     2G      cacheable
 136  * 0xc0000_0000 0xc1fff_ffff    PCI1 MEM                512M    cacheable
 137  * 0xc2000_0000 0xc3fff_ffff    PCIe MEM                512M    cacheable
 138  * 0xc4000_0000 0xc5fff_ffff    RapidIO                 512M    cacheable
 139  * 0xfe000_0000 0xfe00f_ffff    CCSR                    1M      non-cacheable
 140  * 0xfe200_0000 0xfe20f_ffff    PCI1 IO                 1M      non-cacheable
 141  * 0xfe300_0000 0xfe30f_ffff    PCIe IO                 1M      non-cacheable
 142  * 0xff000_0000 0xff3ff_ffff    SDRAM                   64M     cacheable
 143  * 0xff800_0000 0xff80f_ffff    NVRAM/CADMUS            1M      non-cacheable
 144  * 0xfff00_0000 0xfff7f_ffff    FLASH (2nd bank)        8M      non-cacheable
 145  * 0xfff80_0000 0xfffff_ffff    FLASH (boot bank)       8M      non-cacheable
 146  *
 147  */
 148
 149
 150 /*
 151  * Local Bus Definitions
 152  */
 153
 154 /*
 155  * FLASH on the Local Bus
 156  * Two banks, 8M each, using the CFI driver.
 157  * Boot from BR0/OR0 bank at 0xff00_0000
 158  * Alternate BR1/OR1 bank at 0xff80_0000
 159  *
 160  * BR0, BR1:
 161  *    Base address 0 = 0xff00_0000 = BR0[0:16] = 1111 1111 0000 0000 0
 162  *    Base address 1 = 0xff80_0000 = BR1[0:16] = 1111 1111 1000 0000 0
 163  *    Port Size = 16 bits = BRx[19:20] = 10
 164  *    Use GPCM = BRx[24:26] = 000
 165  *    Valid = BRx[31] = 1
 166  *
 167  * 0    4    8    12   16   20   24   28
 168  * 1111 1111 1000 0000 0001 0000 0000 0001 = ff801001    BR0
 169  * 1111 1111 0000 0000 0001 0000 0000 0001 = ff001001    BR1
 170  *
 171  * OR0, OR1:
 172  *    Addr Mask = 8M = ORx[0:16] = 1111 1111 1000 0000 0
 173  *    Reserved ORx[17:18] = 11, confusion here?
 174  *    CSNT = ORx[20] = 1
 175  *    ACS = half cycle delay = ORx[21:22] = 11
 176  *    SCY = 6 = ORx[24:27] = 0110
 177  *    TRLX = use relaxed timing = ORx[29] = 1
 178  *    EAD = use external address latch delay = OR[31] = 1
 179  *
 180  * 0    4    8    12   16   20   24   28
 181  * 1111 1111 1000 0000 0110 1110 0110 0101 = ff806e65    ORx
 182  */
 183
 184 #define CONFIG_SYS_FLASH_BASE           0xff000000      /* start of FLASH 16M */
 185 #ifdef CONFIG_PHYS_64BIT
 186 #define CONFIG_SYS_FLASH_BASE_PHYS      0xfff000000ull
 187 #else
 188 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 189 #endif
 190
 191 #define CONFIG_SYS_BR0_PRELIM \
 192         (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x800000)) \
 193         | BR_PS_16 | BR_V)
 194 #define CONFIG_SYS_BR1_PRELIM \
 195         (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V)
 196
 197 #define CONFIG_SYS_OR0_PRELIM           0xff806e65
 198 #define CONFIG_SYS_OR1_PRELIM           0xff806e65
 199
 200 #define CONFIG_SYS_FLASH_BANKS_LIST \
 201         {CONFIG_SYS_FLASH_BASE_PHYS + 0x800000, CONFIG_SYS_FLASH_BASE_PHYS}
 202 #define CONFIG_SYS_MAX_FLASH_BANKS      2               /* number of banks */
 203 #define CONFIG_SYS_MAX_FLASH_SECT       128             /* sectors per device */
 204 #undef  CONFIG_SYS_FLASH_CHECKSUM
 205 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 206 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 207
 208 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 209
 210 #define CONFIG_FLASH_CFI_DRIVER
 211 #define CONFIG_SYS_FLASH_CFI
 212 #define CONFIG_SYS_FLASH_EMPTY_INFO
 213
 214 #define CONFIG_HWCONFIG                 /* enable hwconfig */
 215
 216 /*
 217  * SDRAM on the Local Bus
 218  */
 219 #define CONFIG_SYS_LBC_SDRAM_BASE       0xf0000000      /* Localbus SDRAM */
 220 #ifdef CONFIG_PHYS_64BIT
 221 #define CONFIG_SYS_LBC_SDRAM_BASE_PHYS  0xff0000000ull
 222 #else
 223 #define CONFIG_SYS_LBC_SDRAM_BASE_PHYS  CONFIG_SYS_LBC_SDRAM_BASE
 224 #endif
 225 #define CONFIG_SYS_LBC_SDRAM_SIZE       64              /* LBC SDRAM is 64MB */
 226
 227 /*
 228  * Base Register 2 and Option Register 2 configure SDRAM.
 229  * The SDRAM base address, CONFIG_SYS_LBC_SDRAM_BASE, is 0xf0000000.
 230  *
 231  * For BR2, need:
 232  *    Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
 233  *    port-size = 32-bits = BR2[19:20] = 11
 234  *    no parity checking = BR2[21:22] = 00
 235  *    SDRAM for MSEL = BR2[24:26] = 011
 236  *    Valid = BR[31] = 1
 237  *
 238  * 0    4    8    12   16   20   24   28
 239  * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861
 240  *
 241  * FIXME: CONFIG_SYS_LBC_SDRAM_BASE should be masked and OR'ed into
 242  * FIXME: the top 17 bits of BR2.
 243  */
 244
 245 #define CONFIG_SYS_BR2_PRELIM \
 246         (BR_PHYS_ADDR(CONFIG_SYS_LBC_SDRAM_BASE_PHYS) \
 247         | BR_PS_32 | (3<<BR_MSEL_SHIFT) | BR_V)
 248
 249 /*
 250  * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64.
 251  *
 252  * For OR2, need:
 253  *    64MB mask for AM, OR2[0:7] = 1111 1100
 254  *                 XAM, OR2[17:18] = 11
 255  *    9 columns OR2[19-21] = 010
 256  *    13 rows   OR2[23-25] = 100
 257  *    EAD set for extra time OR[31] = 1
 258  *
 259  * 0    4    8    12   16   20   24   28
 260  * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901
 261  */
 262
 263 #define CONFIG_SYS_OR2_PRELIM           0xfc006901
 264
 265 #define CONFIG_SYS_LBC_LCRR             0x00030004      /* LB clock ratio reg */
 266 #define CONFIG_SYS_LBC_LBCR             0x00000000      /* LB config reg */
 267 #define CONFIG_SYS_LBC_LSRT             0x20000000      /* LB sdram refresh timer */
 268 #define CONFIG_SYS_LBC_MRTPR            0x00000000      /* LB refresh timer prescal*/
 269
 270 /*
 271  * Common settings for all Local Bus SDRAM commands.
 272  * At run time, either BSMA1516 (for CPU 1.1)
 273  *                  or BSMA1617 (for CPU 1.0) (old)
 274  * is OR'ed in too.
 275  */
 276 #define CONFIG_SYS_LBC_LSDMR_COMMON     ( LSDMR_RFCR16          \
 277                                 | LSDMR_PRETOACT7       \
 278                                 | LSDMR_ACTTORW7        \
 279                                 | LSDMR_BL8             \
 280                                 | LSDMR_WRC4            \
 281                                 | LSDMR_CL3             \
 282                                 | LSDMR_RFEN            \
 283                                 )
 284
 285 /*
 286  * The CADMUS registers are connected to CS3 on CDS.
 287  * The new memory map places CADMUS at 0xf8000000.
 288  *
 289  * For BR3, need:
 290  *    Base address of 0xf8000000 = BR[0:16] = 1111 1000 0000 0000 0
 291  *    port-size = 8-bits  = BR[19:20] = 01
 292  *    no parity checking  = BR[21:22] = 00
 293  *    GPMC for MSEL       = BR[24:26] = 000
 294  *    Valid               = BR[31]    = 1
 295  *
 296  * 0    4    8    12   16   20   24   28
 297  * 1111 1000 0000 0000 0000 1000 0000 0001 = f8000801
 298  *
 299  * For OR3, need:
 300  *    1 MB mask for AM,   OR[0:16]  = 1111 1111 1111 0000 0
 301  *    disable buffer ctrl OR[19]    = 0
 302  *    CSNT                OR[20]    = 1
 303  *    ACS                 OR[21:22] = 11
 304  *    XACS                OR[23]    = 1
 305  *    SCY 15 wait states  OR[24:27] = 1111      max is suboptimal but safe
 306  *    SETA                OR[28]    = 0
 307  *    TRLX                OR[29]    = 1
 308  *    EHTR                OR[30]    = 1
 309  *    EAD extra time      OR[31]    = 1
 310  *
 311  * 0    4    8    12   16   20   24   28
 312  * 1111 1111 1111 0000 0000 1111 1111 0111 = fff00ff7
 313  */
 314
 315 #define CONFIG_FSL_CADMUS
 316
 317 #define CADMUS_BASE_ADDR 0xf8000000
 318 #ifdef CONFIG_PHYS_64BIT
 319 #define CADMUS_BASE_ADDR_PHYS   0xff8000000ull
 320 #else
 321 #define CADMUS_BASE_ADDR_PHYS   CADMUS_BASE_ADDR
 322 #endif
 323 #define CONFIG_SYS_BR3_PRELIM \
 324         (BR_PHYS_ADDR(CADMUS_BASE_ADDR_PHYS) | BR_PS_8 | BR_V)
 325 #define CONFIG_SYS_OR3_PRELIM    0xfff00ff7
 326
 327 #define CONFIG_SYS_INIT_RAM_LOCK        1
 328 #define CONFIG_SYS_INIT_RAM_ADDR        0xe4010000      /* Initial RAM address */
 329 #define CONFIG_SYS_INIT_RAM_SIZE        0x4000          /* Size of used area in RAM */
 330
 331 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 332 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 333
 334 #define CONFIG_SYS_MONITOR_LEN          (256 * 1024) /* Reserve 256 kB for Mon */
 335 #define CONFIG_SYS_MALLOC_LEN   (1024 * 1024)   /* Reserved for malloc */
 336
 337 /* Serial Port */
 338 #define CONFIG_CONS_INDEX       2
 339 #define CONFIG_SYS_NS16550
 340 #define CONFIG_SYS_NS16550_SERIAL
 341 #define CONFIG_SYS_NS16550_REG_SIZE     1
 342 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 343
 344 #define CONFIG_SYS_BAUDRATE_TABLE \
 345         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 346
 347 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
 348 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
 349
 350 /* Use the HUSH parser */
 351 #define CONFIG_SYS_HUSH_PARSER
 352 #ifdef  CONFIG_SYS_HUSH_PARSER
 353 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 354 #endif
 355
 356 /* pass open firmware flat tree */
 357 #define CONFIG_OF_LIBFDT                1
 358 #define CONFIG_OF_BOARD_SETUP           1
 359 #define CONFIG_OF_STDOUT_VIA_ALIAS      1
 360
 361 /*
 362  * I2C
 363  */
 364 #define CONFIG_FSL_I2C          /* Use FSL common I2C driver */
 365 #define CONFIG_HARD_I2C         /* I2C with hardware support*/
 366 #undef  CONFIG_SOFT_I2C         /* I2C bit-banged */
 367 #define CONFIG_SYS_I2C_SPEED            400000  /* I2C speed and slave address */
 368 #define CONFIG_SYS_I2C_SLAVE            0x7F
 369 #define CONFIG_SYS_I2C_NOPROBES {0x69}  /* Don't probe these addrs */
 370 #define CONFIG_SYS_I2C_OFFSET           0x3000
 371
 372 /* EEPROM */
 373 #define CONFIG_ID_EEPROM
 374 #define CONFIG_SYS_I2C_EEPROM_CCID
 375 #define CONFIG_SYS_ID_EEPROM
 376 #define CONFIG_SYS_I2C_EEPROM_ADDR     0x57
 377 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
 378
 379 /*
 380  * General PCI
 381  * Memory space is mapped 1-1, but I/O space must start from 0.
 382  */
 383 #define CONFIG_SYS_PCI1_MEM_VIRT        0x80000000
 384 #ifdef CONFIG_PHYS_64BIT
 385 #define CONFIG_SYS_PCI1_MEM_BUS         0xe0000000
 386 #define CONFIG_SYS_PCI1_MEM_PHYS        0xc00000000ull
 387 #else
 388 #define CONFIG_SYS_PCI1_MEM_BUS 0x80000000
 389 #define CONFIG_SYS_PCI1_MEM_PHYS        0x80000000
 390 #endif
 391 #define CONFIG_SYS_PCI1_MEM_SIZE        0x20000000      /* 512M */
 392 #define CONFIG_SYS_PCI1_IO_VIRT 0xe2000000
 393 #define CONFIG_SYS_PCI1_IO_BUS  0x00000000
 394 #ifdef CONFIG_PHYS_64BIT
 395 #define CONFIG_SYS_PCI1_IO_PHYS 0xfe2000000ull
 396 #else
 397 #define CONFIG_SYS_PCI1_IO_PHYS 0xe2000000
 398 #endif
 399 #define CONFIG_SYS_PCI1_IO_SIZE 0x00100000      /* 1M */
 400
 401 #ifdef CONFIG_PCIE1
 402 #define CONFIG_SYS_PCIE1_NAME           "Slot"
 403 #define CONFIG_SYS_PCIE1_MEM_VIRT       0xa0000000
 404 #ifdef CONFIG_PHYS_64BIT
 405 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 406 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc20000000ull
 407 #else
 408 #define CONFIG_SYS_PCIE1_MEM_BUS        0xa0000000
 409 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xa0000000
 410 #endif
 411 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 412 #define CONFIG_SYS_PCIE1_IO_VIRT        0xe3000000
 413 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
 414 #ifdef CONFIG_PHYS_64BIT
 415 #define CONFIG_SYS_PCIE1_IO_PHYS        0xfe3000000ull
 416 #else
 417 #define CONFIG_SYS_PCIE1_IO_PHYS        0xe3000000
 418 #endif
 419 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00100000      /*   1M */
 420 #endif
 421
 422 /*
 423  * RapidIO MMU
 424  */
 425 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xc0000000
 426 #ifdef CONFIG_PHYS_64BIT
 427 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc40000000ull
 428 #else
 429 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc0000000
 430 #endif
 431 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x20000000      /* 512M */
 432
 433 #ifdef CONFIG_LEGACY
 434 #define BRIDGE_ID 17
 435 #define VIA_ID 2
 436 #else
 437 #define BRIDGE_ID 28
 438 #define VIA_ID 4
 439 #endif
 440
 441 #if defined(CONFIG_PCI)
 442
 443 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 444
 445 #undef CONFIG_EEPRO100
 446 #undef CONFIG_TULIP
 447 #define CONFIG_E1000                    /* Define e1000 pci Ethernet card */
 448
 449 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 450
 451 #endif  /* CONFIG_PCI */
 452
 453
 454 #if defined(CONFIG_TSEC_ENET)
 455
 456 #define CONFIG_MII              1       /* MII PHY management */
 457 #define CONFIG_TSEC1    1
 458 #define CONFIG_TSEC1_NAME       "eTSEC0"
 459 #define CONFIG_TSEC2    1
 460 #define CONFIG_TSEC2_NAME       "eTSEC1"
 461 #define CONFIG_TSEC3    1
 462 #define CONFIG_TSEC3_NAME       "eTSEC2"
 463 #define CONFIG_TSEC4
 464 #define CONFIG_TSEC4_NAME       "eTSEC3"
 465 #undef CONFIG_MPC85XX_FEC
 466
 467 #define CONFIG_PHY_MARVELL
 468
 469 #define TSEC1_PHY_ADDR          0
 470 #define TSEC2_PHY_ADDR          1
 471 #define TSEC3_PHY_ADDR          2
 472 #define TSEC4_PHY_ADDR          3
 473
 474 #define TSEC1_PHYIDX            0
 475 #define TSEC2_PHYIDX            0
 476 #define TSEC3_PHYIDX            0
 477 #define TSEC4_PHYIDX            0
 478 #define TSEC1_FLAGS             TSEC_GIGABIT
 479 #define TSEC2_FLAGS             TSEC_GIGABIT
 480 #define TSEC3_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 481 #define TSEC4_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 482
 483 /* Options are: eTSEC[0-3] */
 484 #define CONFIG_ETHPRIME         "eTSEC0"
 485 #define CONFIG_PHY_GIGE         1       /* Include GbE speed/duplex detection */
 486 #endif  /* CONFIG_TSEC_ENET */
 487
 488 /*
 489  * Environment
 490  */
 491 #define CONFIG_ENV_IS_IN_FLASH  1
 492 #if CONFIG_SYS_MONITOR_BASE > 0xfff80000
 493 #define CONFIG_ENV_ADDR 0xfff80000
 494 #else
 495 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 496 #endif
 497 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K for env */
 498 #define CONFIG_ENV_SIZE         0x2000
 499
 500 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download */
 501 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change */
 502
 503 /*
 504  * BOOTP options
 505  */
 506 #define CONFIG_BOOTP_BOOTFILESIZE
 507 #define CONFIG_BOOTP_BOOTPATH
 508 #define CONFIG_BOOTP_GATEWAY
 509 #define CONFIG_BOOTP_HOSTNAME
 510
 511
 512 /*
 513  * Command line configuration.
 514  */
 515 #include <config_cmd_default.h>
 516
 517 #define CONFIG_CMD_PING
 518 #define CONFIG_CMD_I2C
 519 #define CONFIG_CMD_MII
 520 #define CONFIG_CMD_ELF
 521 #define CONFIG_CMD_IRQ
 522 #define CONFIG_CMD_SETEXPR
 523 #define CONFIG_CMD_REGINFO
 524
 525 #if defined(CONFIG_PCI)
 526     #define CONFIG_CMD_PCI
 527 #endif
 528
 529
 530 #undef CONFIG_WATCHDOG                  /* watchdog disabled */
 531
 532 /*
 533  * Miscellaneous configurable options
 534  */
 535 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 536 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 537 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 538 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 539 #define CONFIG_SYS_PROMPT       "=> "           /* Monitor Command Prompt */
 540 #if defined(CONFIG_CMD_KGDB)
 541 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 542 #else
 543 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 544 #endif
 545 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 546 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 547 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
 548 #define CONFIG_SYS_HZ           1000            /* decrementer freq: 1ms ticks */
 549
 550 /*
 551  * For booting Linux, the board info and command line data
 552  * have to be in the first 64 MB of memory, since this is
 553  * the maximum mapped by the Linux kernel during initialization.
 554  */
 555 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial Memory map for Linux*/
 556 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 557
 558 #if defined(CONFIG_CMD_KGDB)
 559 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 560 #define CONFIG_KGDB_SER_INDEX   2       /* which serial port to use */
 561 #endif
 562
 563 /*
 564  * Environment Configuration
 565  */
 566
 567 /* The mac addresses for all ethernet interface */
 568 #if defined(CONFIG_TSEC_ENET)
 569 #define CONFIG_HAS_ETH0
 570 #define CONFIG_ETHADDR   00:E0:0C:00:00:FD
 571 #define CONFIG_HAS_ETH1
 572 #define CONFIG_ETH1ADDR  00:E0:0C:00:01:FD
 573 #define CONFIG_HAS_ETH2
 574 #define CONFIG_ETH2ADDR  00:E0:0C:00:02:FD
 575 #define CONFIG_HAS_ETH3
 576 #define CONFIG_ETH3ADDR  00:E0:0C:00:03:FD
 577 #endif
 578
 579 #define CONFIG_IPADDR    192.168.1.253
 580
 581 #define CONFIG_HOSTNAME  unknown
 582 #define CONFIG_ROOTPATH  "/nfsroot"
 583 #define CONFIG_BOOTFILE "8548cds/uImage.uboot"
 584 #define CONFIG_UBOOTPATH        8548cds/u-boot.bin      /* TFTP server */
 585
 586 #define CONFIG_SERVERIP  192.168.1.1
 587 #define CONFIG_GATEWAYIP 192.168.1.1
 588 #define CONFIG_NETMASK   255.255.255.0
 589
 590 #define CONFIG_LOADADDR 1000000 /*default location for tftp and bootm*/
 591
 592 #define CONFIG_BOOTDELAY 10     /* -1 disables auto-boot */
 593 #undef  CONFIG_BOOTARGS         /* the boot command will set bootargs*/
 594
 595 #define CONFIG_BAUDRATE 115200
 596
 597 #define CONFIG_EXTRA_ENV_SETTINGS               \
 598         "hwconfig=fsl_ddr:ecc=off\0"            \
 599         "netdev=eth0\0"                         \
 600         "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0"  \
 601         "tftpflash=tftpboot $loadaddr $uboot; " \
 602                 "protect off " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "   \
 603                 "erase " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "         \
 604                 "cp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize; " \
 605                 "protect on " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "    \
 606                 "cmp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize\0"\
 607         "consoledev=ttyS1\0"                    \
 608         "ramdiskaddr=2000000\0"                 \
 609         "ramdiskfile=ramdisk.uboot\0"           \
 610         "fdtaddr=c00000\0"                      \
 611         "fdtfile=mpc8548cds.dtb\0"
 612
 613 #define CONFIG_NFSBOOTCOMMAND                                           \
 614    "setenv bootargs root=/dev/nfs rw "                                  \
 615       "nfsroot=$serverip:$rootpath "                                    \
 616       "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 617       "console=$consoledev,$baudrate $othbootargs;"                     \
 618    "tftp $loadaddr $bootfile;"                                          \
 619    "tftp $fdtaddr $fdtfile;"                                            \
 620    "bootm $loadaddr - $fdtaddr"
 621
 622
 623 #define CONFIG_RAMBOOTCOMMAND \
 624    "setenv bootargs root=/dev/ram rw "                                  \
 625       "console=$consoledev,$baudrate $othbootargs;"                     \
 626    "tftp $ramdiskaddr $ramdiskfile;"                                    \
 627    "tftp $loadaddr $bootfile;"                                          \
 628    "tftp $fdtaddr $fdtfile;"                                            \
 629    "bootm $loadaddr $ramdiskaddr $fdtaddr"
 630
 631 #define CONFIG_BOOTCOMMAND      CONFIG_NFSBOOTCOMMAND
 632
 633 #endif  /* __CONFIG_H */