include/configs/MPC8548CDS.h

   1 /*
   2  * Copyright 2004, 2007, 2010-2011 Freescale Semiconductor.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * mpc8548cds board configuration file
   9  *
  10  * Please refer to doc/README.mpc85xxcds for more info.
  11  *
  12  */
  13 #ifndef __CONFIG_H
  14 #define __CONFIG_H
  15
  16 #ifdef CONFIG_36BIT
  17 #define CONFIG_PHYS_64BIT
  18 #endif
  19
  20 /* High Level Configuration Options */
  21 #define CONFIG_BOOKE            1       /* BOOKE */
  22 #define CONFIG_E500             1       /* BOOKE e500 family */
  23 #define CONFIG_MPC8548          1       /* MPC8548 specific */
  24 #define CONFIG_MPC8548CDS       1       /* MPC8548CDS board specific */
  25
  26 #ifndef CONFIG_SYS_TEXT_BASE
  27 #define CONFIG_SYS_TEXT_BASE    0xfff80000
  28 #endif
  29
  30 #define CONFIG_SYS_SRIO
  31 #define CONFIG_SRIO1                    /* SRIO port 1 */
  32
  33 #define CONFIG_PCI              /* enable any pci type devices */
  34 #define CONFIG_PCI1             /* PCI controller 1 */
  35 #define CONFIG_PCIE1            /* PCIE controler 1 (slot 1) */
  36 #undef CONFIG_PCI2
  37 #define CONFIG_FSL_PCI_INIT     1       /* Use common FSL init code */
  38 #define CONFIG_PCI_INDIRECT_BRIDGE 1    /* indirect PCI bridge support */
  39 #define CONFIG_FSL_PCIE_RESET   1       /* need PCIe reset errata */
  40 #define CONFIG_SYS_PCI_64BIT    1       /* enable 64-bit PCI resources */
  41
  42 #define CONFIG_TSEC_ENET                /* tsec ethernet support */
  43 #define CONFIG_ENV_OVERWRITE
  44 #define CONFIG_INTERRUPTS               /* enable pci, srio, ddr interrupts */
  45 #define CONFIG_FSL_LAW          1       /* Use common FSL init code */
  46
  47 #define CONFIG_FSL_VIA
  48
  49 #ifndef __ASSEMBLY__
  50 extern unsigned long get_clock_freq(void);
  51 #endif
  52 #define CONFIG_SYS_CLK_FREQ     get_clock_freq() /* sysclk for MPC85xx */
  53
  54 /*
  55  * These can be toggled for performance analysis, otherwise use default.
  56  */
  57 #define CONFIG_L2_CACHE                 /* toggle L2 cache */
  58 #define CONFIG_BTB                      /* toggle branch predition */
  59
  60 /*
  61  * Only possible on E500 Version 2 or newer cores.
  62  */
  63 #define CONFIG_ENABLE_36BIT_PHYS        1
  64
  65 #ifdef CONFIG_PHYS_64BIT
  66 #define CONFIG_ADDR_MAP
  67 #define CONFIG_SYS_NUM_ADDR_MAP         16      /* number of TLB1 entries */
  68 #endif
  69
  70 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
  71 #define CONFIG_SYS_MEMTEST_END          0x00400000
  72
  73 #define CONFIG_SYS_CCSRBAR              0xe0000000
  74 #define CONFIG_SYS_CCSRBAR_PHYS_LOW     CONFIG_SYS_CCSRBAR
  75
  76 /* DDR Setup */
  77 #define CONFIG_SYS_FSL_DDR2
  78 #undef CONFIG_FSL_DDR_INTERACTIVE
  79 #define CONFIG_SPD_EEPROM               /* Use SPD EEPROM for DDR setup*/
  80 #define CONFIG_DDR_SPD
  81
  82 #define CONFIG_DDR_ECC
  83 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER       /* DDR controller or DMA? */
  84 #define CONFIG_MEM_INIT_VALUE   0xDeadBeef
  85
  86 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000      /* DDR is system memory*/
  87 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  88
  89 #define CONFIG_NUM_DDR_CONTROLLERS      1
  90 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
  91 #define CONFIG_CHIP_SELECTS_PER_CTRL    (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
  92
  93 /* I2C addresses of SPD EEPROMs */
  94 #define SPD_EEPROM_ADDRESS      0x51    /* CTLR 0 DIMM 0 */
  95
  96 /* Make sure required options are set */
  97 #ifndef CONFIG_SPD_EEPROM
  98 #error ("CONFIG_SPD_EEPROM is required")
  99 #endif
 100
 101 #undef CONFIG_CLOCKS_IN_MHZ
 102 /*
 103  * Physical Address Map
 104  *
 105  * 32bit:
 106  * 0x0000_0000  0x7fff_ffff     DDR                     2G      cacheable
 107  * 0x8000_0000  0x9fff_ffff     PCI1 MEM                512M    cacheable
 108  * 0xa000_0000  0xbfff_ffff     PCIe MEM                512M    cacheable
 109  * 0xc000_0000  0xdfff_ffff     RapidIO                 512M    cacheable
 110  * 0xe000_0000  0xe00f_ffff     CCSR                    1M      non-cacheable
 111  * 0xe200_0000  0xe20f_ffff     PCI1 IO                 1M      non-cacheable
 112  * 0xe300_0000  0xe30f_ffff     PCIe IO                 1M      non-cacheable
 113  * 0xf000_0000  0xf3ff_ffff     SDRAM                   64M     cacheable
 114  * 0xf800_0000  0xf80f_ffff     NVRAM/CADMUS            1M      non-cacheable
 115  * 0xff00_0000  0xff7f_ffff     FLASH (2nd bank)        8M      non-cacheable
 116  * 0xff80_0000  0xffff_ffff     FLASH (boot bank)       8M      non-cacheable
 117  *
 118  * 36bit:
 119  * 0x00000_0000 0x07fff_ffff    DDR                     2G      cacheable
 120  * 0xc0000_0000 0xc1fff_ffff    PCI1 MEM                512M    cacheable
 121  * 0xc2000_0000 0xc3fff_ffff    PCIe MEM                512M    cacheable
 122  * 0xc4000_0000 0xc5fff_ffff    RapidIO                 512M    cacheable
 123  * 0xfe000_0000 0xfe00f_ffff    CCSR                    1M      non-cacheable
 124  * 0xfe200_0000 0xfe20f_ffff    PCI1 IO                 1M      non-cacheable
 125  * 0xfe300_0000 0xfe30f_ffff    PCIe IO                 1M      non-cacheable
 126  * 0xff000_0000 0xff3ff_ffff    SDRAM                   64M     cacheable
 127  * 0xff800_0000 0xff80f_ffff    NVRAM/CADMUS            1M      non-cacheable
 128  * 0xfff00_0000 0xfff7f_ffff    FLASH (2nd bank)        8M      non-cacheable
 129  * 0xfff80_0000 0xfffff_ffff    FLASH (boot bank)       8M      non-cacheable
 130  *
 131  */
 132
 133
 134 /*
 135  * Local Bus Definitions
 136  */
 137
 138 /*
 139  * FLASH on the Local Bus
 140  * Two banks, 8M each, using the CFI driver.
 141  * Boot from BR0/OR0 bank at 0xff00_0000
 142  * Alternate BR1/OR1 bank at 0xff80_0000
 143  *
 144  * BR0, BR1:
 145  *    Base address 0 = 0xff00_0000 = BR0[0:16] = 1111 1111 0000 0000 0
 146  *    Base address 1 = 0xff80_0000 = BR1[0:16] = 1111 1111 1000 0000 0
 147  *    Port Size = 16 bits = BRx[19:20] = 10
 148  *    Use GPCM = BRx[24:26] = 000
 149  *    Valid = BRx[31] = 1
 150  *
 151  * 0    4    8    12   16   20   24   28
 152  * 1111 1111 1000 0000 0001 0000 0000 0001 = ff801001    BR0
 153  * 1111 1111 0000 0000 0001 0000 0000 0001 = ff001001    BR1
 154  *
 155  * OR0, OR1:
 156  *    Addr Mask = 8M = ORx[0:16] = 1111 1111 1000 0000 0
 157  *    Reserved ORx[17:18] = 11, confusion here?
 158  *    CSNT = ORx[20] = 1
 159  *    ACS = half cycle delay = ORx[21:22] = 11
 160  *    SCY = 6 = ORx[24:27] = 0110
 161  *    TRLX = use relaxed timing = ORx[29] = 1
 162  *    EAD = use external address latch delay = OR[31] = 1
 163  *
 164  * 0    4    8    12   16   20   24   28
 165  * 1111 1111 1000 0000 0110 1110 0110 0101 = ff806e65    ORx
 166  */
 167
 168 #define CONFIG_SYS_FLASH_BASE           0xff000000      /* start of FLASH 16M */
 169 #ifdef CONFIG_PHYS_64BIT
 170 #define CONFIG_SYS_FLASH_BASE_PHYS      0xfff000000ull
 171 #else
 172 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 173 #endif
 174
 175 #define CONFIG_SYS_BR0_PRELIM \
 176         (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS + 0x800000) | BR_PS_16 | BR_V)
 177 #define CONFIG_SYS_BR1_PRELIM \
 178         (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V)
 179
 180 #define CONFIG_SYS_OR0_PRELIM           0xff806e65
 181 #define CONFIG_SYS_OR1_PRELIM           0xff806e65
 182
 183 #define CONFIG_SYS_FLASH_BANKS_LIST \
 184         {CONFIG_SYS_FLASH_BASE_PHYS + 0x800000, CONFIG_SYS_FLASH_BASE_PHYS}
 185 #define CONFIG_SYS_MAX_FLASH_BANKS      2               /* number of banks */
 186 #define CONFIG_SYS_MAX_FLASH_SECT       128             /* sectors per device */
 187 #undef  CONFIG_SYS_FLASH_CHECKSUM
 188 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 189 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 190
 191 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 192
 193 #define CONFIG_FLASH_CFI_DRIVER
 194 #define CONFIG_SYS_FLASH_CFI
 195 #define CONFIG_SYS_FLASH_EMPTY_INFO
 196
 197 #define CONFIG_HWCONFIG                 /* enable hwconfig */
 198
 199 /*
 200  * SDRAM on the Local Bus
 201  */
 202 #define CONFIG_SYS_LBC_SDRAM_BASE       0xf0000000      /* Localbus SDRAM */
 203 #ifdef CONFIG_PHYS_64BIT
 204 #define CONFIG_SYS_LBC_SDRAM_BASE_PHYS  0xff0000000ull
 205 #else
 206 #define CONFIG_SYS_LBC_SDRAM_BASE_PHYS  CONFIG_SYS_LBC_SDRAM_BASE
 207 #endif
 208 #define CONFIG_SYS_LBC_SDRAM_SIZE       64              /* LBC SDRAM is 64MB */
 209
 210 /*
 211  * Base Register 2 and Option Register 2 configure SDRAM.
 212  * The SDRAM base address, CONFIG_SYS_LBC_SDRAM_BASE, is 0xf0000000.
 213  *
 214  * For BR2, need:
 215  *    Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
 216  *    port-size = 32-bits = BR2[19:20] = 11
 217  *    no parity checking = BR2[21:22] = 00
 218  *    SDRAM for MSEL = BR2[24:26] = 011
 219  *    Valid = BR[31] = 1
 220  *
 221  * 0    4    8    12   16   20   24   28
 222  * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861
 223  *
 224  * FIXME: CONFIG_SYS_LBC_SDRAM_BASE should be masked and OR'ed into
 225  * FIXME: the top 17 bits of BR2.
 226  */
 227
 228 #define CONFIG_SYS_BR2_PRELIM \
 229         (BR_PHYS_ADDR(CONFIG_SYS_LBC_SDRAM_BASE_PHYS) \
 230         | BR_PS_32 | (3<<BR_MSEL_SHIFT) | BR_V)
 231
 232 /*
 233  * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64.
 234  *
 235  * For OR2, need:
 236  *    64MB mask for AM, OR2[0:7] = 1111 1100
 237  *                 XAM, OR2[17:18] = 11
 238  *    9 columns OR2[19-21] = 010
 239  *    13 rows   OR2[23-25] = 100
 240  *    EAD set for extra time OR[31] = 1
 241  *
 242  * 0    4    8    12   16   20   24   28
 243  * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901
 244  */
 245
 246 #define CONFIG_SYS_OR2_PRELIM           0xfc006901
 247
 248 #define CONFIG_SYS_LBC_LCRR             0x00030004      /* LB clock ratio reg */
 249 #define CONFIG_SYS_LBC_LBCR             0x00000000      /* LB config reg */
 250 #define CONFIG_SYS_LBC_LSRT             0x20000000      /* LB sdram refresh timer */
 251 #define CONFIG_SYS_LBC_MRTPR            0x00000000      /* LB refresh timer prescal*/
 252
 253 /*
 254  * Common settings for all Local Bus SDRAM commands.
 255  * At run time, either BSMA1516 (for CPU 1.1)
 256  *                  or BSMA1617 (for CPU 1.0) (old)
 257  * is OR'ed in too.
 258  */
 259 #define CONFIG_SYS_LBC_LSDMR_COMMON     ( LSDMR_RFCR16          \
 260                                 | LSDMR_PRETOACT7       \
 261                                 | LSDMR_ACTTORW7        \
 262                                 | LSDMR_BL8             \
 263                                 | LSDMR_WRC4            \
 264                                 | LSDMR_CL3             \
 265                                 | LSDMR_RFEN            \
 266                                 )
 267
 268 /*
 269  * The CADMUS registers are connected to CS3 on CDS.
 270  * The new memory map places CADMUS at 0xf8000000.
 271  *
 272  * For BR3, need:
 273  *    Base address of 0xf8000000 = BR[0:16] = 1111 1000 0000 0000 0
 274  *    port-size = 8-bits  = BR[19:20] = 01
 275  *    no parity checking  = BR[21:22] = 00
 276  *    GPMC for MSEL       = BR[24:26] = 000
 277  *    Valid               = BR[31]    = 1
 278  *
 279  * 0    4    8    12   16   20   24   28
 280  * 1111 1000 0000 0000 0000 1000 0000 0001 = f8000801
 281  *
 282  * For OR3, need:
 283  *    1 MB mask for AM,   OR[0:16]  = 1111 1111 1111 0000 0
 284  *    disable buffer ctrl OR[19]    = 0
 285  *    CSNT                OR[20]    = 1
 286  *    ACS                 OR[21:22] = 11
 287  *    XACS                OR[23]    = 1
 288  *    SCY 15 wait states  OR[24:27] = 1111      max is suboptimal but safe
 289  *    SETA                OR[28]    = 0
 290  *    TRLX                OR[29]    = 1
 291  *    EHTR                OR[30]    = 1
 292  *    EAD extra time      OR[31]    = 1
 293  *
 294  * 0    4    8    12   16   20   24   28
 295  * 1111 1111 1111 0000 0000 1111 1111 0111 = fff00ff7
 296  */
 297
 298 #define CONFIG_FSL_CADMUS
 299
 300 #define CADMUS_BASE_ADDR 0xf8000000
 301 #ifdef CONFIG_PHYS_64BIT
 302 #define CADMUS_BASE_ADDR_PHYS   0xff8000000ull
 303 #else
 304 #define CADMUS_BASE_ADDR_PHYS   CADMUS_BASE_ADDR
 305 #endif
 306 #define CONFIG_SYS_BR3_PRELIM \
 307         (BR_PHYS_ADDR(CADMUS_BASE_ADDR_PHYS) | BR_PS_8 | BR_V)
 308 #define CONFIG_SYS_OR3_PRELIM    0xfff00ff7
 309
 310 #define CONFIG_SYS_INIT_RAM_LOCK        1
 311 #define CONFIG_SYS_INIT_RAM_ADDR        0xe4010000      /* Initial RAM address */
 312 #define CONFIG_SYS_INIT_RAM_SIZE        0x4000          /* Size of used area in RAM */
 313
 314 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 315 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 316
 317 #define CONFIG_SYS_MONITOR_LEN          (256 * 1024) /* Reserve 256 kB for Mon */
 318 #define CONFIG_SYS_MALLOC_LEN   (1024 * 1024)   /* Reserved for malloc */
 319
 320 /* Serial Port */
 321 #define CONFIG_CONS_INDEX       2
 322 #define CONFIG_SYS_NS16550
 323 #define CONFIG_SYS_NS16550_SERIAL
 324 #define CONFIG_SYS_NS16550_REG_SIZE     1
 325 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 326
 327 #define CONFIG_SYS_BAUDRATE_TABLE \
 328         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 329
 330 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
 331 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
 332
 333 /* Use the HUSH parser */
 334 #define CONFIG_SYS_HUSH_PARSER
 335
 336 /* pass open firmware flat tree */
 337 #define CONFIG_OF_LIBFDT                1
 338 #define CONFIG_OF_BOARD_SETUP           1
 339 #define CONFIG_OF_STDOUT_VIA_ALIAS      1
 340
 341 /*
 342  * I2C
 343  */
 344 #define CONFIG_SYS_I2C
 345 #define CONFIG_SYS_I2C_FSL
 346 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 347 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 348 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 349 #define CONFIG_SYS_I2C_NOPROBES         { {0, 0x69} }
 350
 351 /* EEPROM */
 352 #define CONFIG_ID_EEPROM
 353 #define CONFIG_SYS_I2C_EEPROM_CCID
 354 #define CONFIG_SYS_ID_EEPROM
 355 #define CONFIG_SYS_I2C_EEPROM_ADDR     0x57
 356 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
 357
 358 /*
 359  * General PCI
 360  * Memory space is mapped 1-1, but I/O space must start from 0.
 361  */
 362 #define CONFIG_SYS_PCI1_MEM_VIRT        0x80000000
 363 #ifdef CONFIG_PHYS_64BIT
 364 #define CONFIG_SYS_PCI1_MEM_BUS         0xe0000000
 365 #define CONFIG_SYS_PCI1_MEM_PHYS        0xc00000000ull
 366 #else
 367 #define CONFIG_SYS_PCI1_MEM_BUS 0x80000000
 368 #define CONFIG_SYS_PCI1_MEM_PHYS        0x80000000
 369 #endif
 370 #define CONFIG_SYS_PCI1_MEM_SIZE        0x20000000      /* 512M */
 371 #define CONFIG_SYS_PCI1_IO_VIRT 0xe2000000
 372 #define CONFIG_SYS_PCI1_IO_BUS  0x00000000
 373 #ifdef CONFIG_PHYS_64BIT
 374 #define CONFIG_SYS_PCI1_IO_PHYS 0xfe2000000ull
 375 #else
 376 #define CONFIG_SYS_PCI1_IO_PHYS 0xe2000000
 377 #endif
 378 #define CONFIG_SYS_PCI1_IO_SIZE 0x00100000      /* 1M */
 379
 380 #ifdef CONFIG_PCIE1
 381 #define CONFIG_SYS_PCIE1_NAME           "Slot"
 382 #define CONFIG_SYS_PCIE1_MEM_VIRT       0xa0000000
 383 #ifdef CONFIG_PHYS_64BIT
 384 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 385 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc20000000ull
 386 #else
 387 #define CONFIG_SYS_PCIE1_MEM_BUS        0xa0000000
 388 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xa0000000
 389 #endif
 390 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 391 #define CONFIG_SYS_PCIE1_IO_VIRT        0xe3000000
 392 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
 393 #ifdef CONFIG_PHYS_64BIT
 394 #define CONFIG_SYS_PCIE1_IO_PHYS        0xfe3000000ull
 395 #else
 396 #define CONFIG_SYS_PCIE1_IO_PHYS        0xe3000000
 397 #endif
 398 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00100000      /*   1M */
 399 #endif
 400
 401 /*
 402  * RapidIO MMU
 403  */
 404 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xc0000000
 405 #ifdef CONFIG_PHYS_64BIT
 406 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc40000000ull
 407 #else
 408 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc0000000
 409 #endif
 410 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x20000000      /* 512M */
 411
 412 #ifdef CONFIG_LEGACY
 413 #define BRIDGE_ID 17
 414 #define VIA_ID 2
 415 #else
 416 #define BRIDGE_ID 28
 417 #define VIA_ID 4
 418 #endif
 419
 420 #if defined(CONFIG_PCI)
 421
 422 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 423
 424 #undef CONFIG_EEPRO100
 425 #undef CONFIG_TULIP
 426 #define CONFIG_E1000                    /* Define e1000 pci Ethernet card */
 427
 428 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 429
 430 #endif  /* CONFIG_PCI */
 431
 432
 433 #if defined(CONFIG_TSEC_ENET)
 434
 435 #define CONFIG_MII              1       /* MII PHY management */
 436 #define CONFIG_TSEC1    1
 437 #define CONFIG_TSEC1_NAME       "eTSEC0"
 438 #define CONFIG_TSEC2    1
 439 #define CONFIG_TSEC2_NAME       "eTSEC1"
 440 #define CONFIG_TSEC3    1
 441 #define CONFIG_TSEC3_NAME       "eTSEC2"
 442 #define CONFIG_TSEC4
 443 #define CONFIG_TSEC4_NAME       "eTSEC3"
 444 #undef CONFIG_MPC85XX_FEC
 445
 446 #define CONFIG_PHY_MARVELL
 447
 448 #define TSEC1_PHY_ADDR          0
 449 #define TSEC2_PHY_ADDR          1
 450 #define TSEC3_PHY_ADDR          2
 451 #define TSEC4_PHY_ADDR          3
 452
 453 #define TSEC1_PHYIDX            0
 454 #define TSEC2_PHYIDX            0
 455 #define TSEC3_PHYIDX            0
 456 #define TSEC4_PHYIDX            0
 457 #define TSEC1_FLAGS             TSEC_GIGABIT
 458 #define TSEC2_FLAGS             TSEC_GIGABIT
 459 #define TSEC3_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 460 #define TSEC4_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 461
 462 /* Options are: eTSEC[0-3] */
 463 #define CONFIG_ETHPRIME         "eTSEC0"
 464 #define CONFIG_PHY_GIGE         1       /* Include GbE speed/duplex detection */
 465 #endif  /* CONFIG_TSEC_ENET */
 466
 467 /*
 468  * Environment
 469  */
 470 #define CONFIG_ENV_IS_IN_FLASH  1
 471 #if CONFIG_SYS_MONITOR_BASE > 0xfff80000
 472 #define CONFIG_ENV_ADDR 0xfff80000
 473 #else
 474 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 475 #endif
 476 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K for env */
 477 #define CONFIG_ENV_SIZE         0x2000
 478
 479 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download */
 480 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change */
 481
 482 /*
 483  * BOOTP options
 484  */
 485 #define CONFIG_BOOTP_BOOTFILESIZE
 486 #define CONFIG_BOOTP_BOOTPATH
 487 #define CONFIG_BOOTP_GATEWAY
 488 #define CONFIG_BOOTP_HOSTNAME
 489
 490
 491 /*
 492  * Command line configuration.
 493  */
 494 #include <config_cmd_default.h>
 495
 496 #define CONFIG_CMD_PING
 497 #define CONFIG_CMD_I2C
 498 #define CONFIG_CMD_MII
 499 #define CONFIG_CMD_ELF
 500 #define CONFIG_CMD_IRQ
 501 #define CONFIG_CMD_REGINFO
 502
 503 #if defined(CONFIG_PCI)
 504     #define CONFIG_CMD_PCI
 505 #endif
 506
 507
 508 #undef CONFIG_WATCHDOG                  /* watchdog disabled */
 509
 510 /*
 511  * Miscellaneous configurable options
 512  */
 513 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 514 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 515 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 516 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 517 #if defined(CONFIG_CMD_KGDB)
 518 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 519 #else
 520 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 521 #endif
 522 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 523 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 524 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
 525
 526 /*
 527  * For booting Linux, the board info and command line data
 528  * have to be in the first 64 MB of memory, since this is
 529  * the maximum mapped by the Linux kernel during initialization.
 530  */
 531 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial Memory map for Linux*/
 532 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 533
 534 #if defined(CONFIG_CMD_KGDB)
 535 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 536 #endif
 537
 538 /*
 539  * Environment Configuration
 540  */
 541 #if defined(CONFIG_TSEC_ENET)
 542 #define CONFIG_HAS_ETH0
 543 #define CONFIG_HAS_ETH1
 544 #define CONFIG_HAS_ETH2
 545 #define CONFIG_HAS_ETH3
 546 #endif
 547
 548 #define CONFIG_IPADDR    192.168.1.253
 549
 550 #define CONFIG_HOSTNAME  unknown
 551 #define CONFIG_ROOTPATH  "/nfsroot"
 552 #define CONFIG_BOOTFILE "8548cds/uImage.uboot"
 553 #define CONFIG_UBOOTPATH        8548cds/u-boot.bin      /* TFTP server */
 554
 555 #define CONFIG_SERVERIP  192.168.1.1
 556 #define CONFIG_GATEWAYIP 192.168.1.1
 557 #define CONFIG_NETMASK   255.255.255.0
 558
 559 #define CONFIG_LOADADDR 1000000 /*default location for tftp and bootm*/
 560
 561 #define CONFIG_BOOTDELAY 10     /* -1 disables auto-boot */
 562 #undef  CONFIG_BOOTARGS         /* the boot command will set bootargs*/
 563
 564 #define CONFIG_BAUDRATE 115200
 565
 566 #define CONFIG_EXTRA_ENV_SETTINGS               \
 567         "hwconfig=fsl_ddr:ecc=off\0"            \
 568         "netdev=eth0\0"                         \
 569         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"     \
 570         "tftpflash=tftpboot $loadaddr $uboot; " \
 571                 "protect off " __stringify(CONFIG_SYS_TEXT_BASE)        \
 572                         " +$filesize; " \
 573                 "erase " __stringify(CONFIG_SYS_TEXT_BASE)              \
 574                         " +$filesize; " \
 575                 "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE)     \
 576                         " $filesize; "  \
 577                 "protect on " __stringify(CONFIG_SYS_TEXT_BASE)         \
 578                         " +$filesize; " \
 579                 "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE)    \
 580                         " $filesize\0"  \
 581         "consoledev=ttyS1\0"                    \
 582         "ramdiskaddr=2000000\0"                 \
 583         "ramdiskfile=ramdisk.uboot\0"           \
 584         "fdtaddr=c00000\0"                      \
 585         "fdtfile=mpc8548cds.dtb\0"
 586
 587 #define CONFIG_NFSBOOTCOMMAND                                           \
 588    "setenv bootargs root=/dev/nfs rw "                                  \
 589       "nfsroot=$serverip:$rootpath "                                    \
 590       "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 591       "console=$consoledev,$baudrate $othbootargs;"                     \
 592    "tftp $loadaddr $bootfile;"                                          \
 593    "tftp $fdtaddr $fdtfile;"                                            \
 594    "bootm $loadaddr - $fdtaddr"
 595
 596
 597 #define CONFIG_RAMBOOTCOMMAND \
 598    "setenv bootargs root=/dev/ram rw "                                  \
 599       "console=$consoledev,$baudrate $othbootargs;"                     \
 600    "tftp $ramdiskaddr $ramdiskfile;"                                    \
 601    "tftp $loadaddr $bootfile;"                                          \
 602    "tftp $fdtaddr $fdtfile;"                                            \
 603    "bootm $loadaddr $ramdiskaddr $fdtaddr"
 604
 605 #define CONFIG_BOOTCOMMAND      CONFIG_NFSBOOTCOMMAND
 606
 607 #endif  /* __CONFIG_H */