include/configs/MPC8555CDS.h

   1 /*
   2  * Copyright 2004, 2011 Freescale Semiconductor.
   3  *
   4  * See file CREDITS for list of people who contributed to this
   5  * project.
   6  *
   7  * This program is free software; you can redistribute it and/or
   8  * modify it under the terms of the GNU General Public License as
   9  * published by the Free Software Foundation; either version 2 of
  10  * the License, or (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  20  * MA 02111-1307 USA
  21  */
  22
  23 /*
  24  * mpc8555cds board configuration file
  25  *
  26  * Please refer to doc/README.mpc85xxcds for more info.
  27  *
  28  */
  29 #ifndef __CONFIG_H
  30 #define __CONFIG_H
  31
  32 /* High Level Configuration Options */
  33 #define CONFIG_BOOKE            1       /* BOOKE */
  34 #define CONFIG_E500             1       /* BOOKE e500 family */
  35 #define CONFIG_MPC85xx          1       /* MPC8540/60/55/41 */
  36 #define CONFIG_CPM2             1       /* has CPM2 */
  37 #define CONFIG_MPC8555          1       /* MPC8555 specific */
  38 #define CONFIG_MPC8555CDS       1       /* MPC8555CDS board specific */
  39
  40 #define CONFIG_SYS_TEXT_BASE    0xfff80000
  41
  42 #define CONFIG_PCI
  43 #define CONFIG_SYS_PCI_64BIT    1       /* enable 64-bit PCI resources */
  44 #define CONFIG_TSEC_ENET                /* tsec ethernet support */
  45 #define CONFIG_ENV_OVERWRITE
  46 #define CONFIG_FSL_LAW          1       /* Use common FSL init code */
  47
  48 #define CONFIG_FSL_VIA
  49
  50
  51 #ifndef __ASSEMBLY__
  52 extern unsigned long get_clock_freq(void);
  53 #endif
  54 #define CONFIG_SYS_CLK_FREQ     get_clock_freq() /* sysclk for MPC85xx */
  55
  56 /*
  57  * These can be toggled for performance analysis, otherwise use default.
  58  */
  59 #define CONFIG_L2_CACHE                     /* toggle L2 cache  */
  60 #define CONFIG_BTB                          /* toggle branch predition */
  61
  62 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
  63 #define CONFIG_SYS_MEMTEST_END          0x00400000
  64
  65 #define CONFIG_SYS_CCSRBAR              0xe0000000
  66 #define CONFIG_SYS_CCSRBAR_PHYS_LOW     CONFIG_SYS_CCSRBAR
  67
  68 /* DDR Setup */
  69 #define CONFIG_FSL_DDR1
  70 #define CONFIG_SPD_EEPROM               /* Use SPD EEPROM for DDR setup*/
  71 #define CONFIG_DDR_SPD
  72 #undef CONFIG_FSL_DDR_INTERACTIVE
  73
  74 #define CONFIG_MEM_INIT_VALUE           0xDeadBeef
  75
  76 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000      /* DDR is system memory*/
  77 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  78
  79 #define CONFIG_NUM_DDR_CONTROLLERS      1
  80 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
  81 #define CONFIG_CHIP_SELECTS_PER_CTRL    (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
  82
  83 /* I2C addresses of SPD EEPROMs */
  84 #define SPD_EEPROM_ADDRESS      0x51    /* CTLR 0 DIMM 0 */
  85
  86 /* Make sure required options are set */
  87 #ifndef CONFIG_SPD_EEPROM
  88 #error ("CONFIG_SPD_EEPROM is required by MPC85555CDS")
  89 #endif
  90
  91 #undef CONFIG_CLOCKS_IN_MHZ
  92
  93 /*
  94  * Local Bus Definitions
  95  */
  96
  97 /*
  98  * FLASH on the Local Bus
  99  * Two banks, 8M each, using the CFI driver.
 100  * Boot from BR0/OR0 bank at 0xff00_0000
 101  * Alternate BR1/OR1 bank at 0xff80_0000
 102  *
 103  * BR0, BR1:
 104  *    Base address 0 = 0xff00_0000 = BR0[0:16] = 1111 1111 0000 0000 0
 105  *    Base address 1 = 0xff80_0000 = BR1[0:16] = 1111 1111 1000 0000 0
 106  *    Port Size = 16 bits = BRx[19:20] = 10
 107  *    Use GPCM = BRx[24:26] = 000
 108  *    Valid = BRx[31] = 1
 109  *
 110  * 0    4    8    12   16   20   24   28
 111  * 1111 1111 1000 0000 0001 0000 0000 0001 = ff801001    BR0
 112  * 1111 1111 0000 0000 0001 0000 0000 0001 = ff001001    BR1
 113  *
 114  * OR0, OR1:
 115  *    Addr Mask = 8M = ORx[0:16] = 1111 1111 1000 0000 0
 116  *    Reserved ORx[17:18] = 11, confusion here?
 117  *    CSNT = ORx[20] = 1
 118  *    ACS = half cycle delay = ORx[21:22] = 11
 119  *    SCY = 6 = ORx[24:27] = 0110
 120  *    TRLX = use relaxed timing = ORx[29] = 1
 121  *    EAD = use external address latch delay = OR[31] = 1
 122  *
 123  * 0    4    8    12   16   20   24   28
 124  * 1111 1111 1000 0000 0110 1110 0110 0101 = ff806e65    ORx
 125  */
 126
 127 #define CONFIG_SYS_FLASH_BASE           0xff000000      /* start of FLASH 8M */
 128
 129 #define CONFIG_SYS_BR0_PRELIM           0xff801001
 130 #define CONFIG_SYS_BR1_PRELIM           0xff001001
 131
 132 #define CONFIG_SYS_OR0_PRELIM           0xff806e65
 133 #define CONFIG_SYS_OR1_PRELIM           0xff806e65
 134
 135 #define CONFIG_SYS_FLASH_BANKS_LIST     {0xff800000, CONFIG_SYS_FLASH_BASE}
 136 #define CONFIG_SYS_MAX_FLASH_BANKS      2               /* number of banks */
 137 #define CONFIG_SYS_MAX_FLASH_SECT       128             /* sectors per device */
 138 #undef  CONFIG_SYS_FLASH_CHECKSUM
 139 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 140 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 141
 142 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 143
 144 #define CONFIG_FLASH_CFI_DRIVER
 145 #define CONFIG_SYS_FLASH_CFI
 146 #define CONFIG_SYS_FLASH_EMPTY_INFO
 147
 148
 149 /*
 150  * SDRAM on the Local Bus
 151  */
 152 #define CONFIG_SYS_LBC_SDRAM_BASE       0xf0000000      /* Localbus SDRAM */
 153 #define CONFIG_SYS_LBC_SDRAM_SIZE       64              /* LBC SDRAM is 64MB */
 154
 155 /*
 156  * Base Register 2 and Option Register 2 configure SDRAM.
 157  * The SDRAM base address, CONFIG_SYS_LBC_SDRAM_BASE, is 0xf0000000.
 158  *
 159  * For BR2, need:
 160  *    Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
 161  *    port-size = 32-bits = BR2[19:20] = 11
 162  *    no parity checking = BR2[21:22] = 00
 163  *    SDRAM for MSEL = BR2[24:26] = 011
 164  *    Valid = BR[31] = 1
 165  *
 166  * 0    4    8    12   16   20   24   28
 167  * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861
 168  *
 169  * FIXME: CONFIG_SYS_LBC_SDRAM_BASE should be masked and OR'ed into
 170  * FIXME: the top 17 bits of BR2.
 171  */
 172
 173 #define CONFIG_SYS_BR2_PRELIM          0xf0001861
 174
 175 /*
 176  * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64.
 177  *
 178  * For OR2, need:
 179  *    64MB mask for AM, OR2[0:7] = 1111 1100
 180  *                 XAM, OR2[17:18] = 11
 181  *    9 columns OR2[19-21] = 010
 182  *    13 rows   OR2[23-25] = 100
 183  *    EAD set for extra time OR[31] = 1
 184  *
 185  * 0    4    8    12   16   20   24   28
 186  * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901
 187  */
 188
 189 #define CONFIG_SYS_OR2_PRELIM           0xfc006901
 190
 191 #define CONFIG_SYS_LBC_LCRR             0x00030004    /* LB clock ratio reg */
 192 #define CONFIG_SYS_LBC_LBCR             0x00000000    /* LB config reg */
 193 #define CONFIG_SYS_LBC_LSRT             0x20000000  /* LB sdram refresh timer */
 194 #define CONFIG_SYS_LBC_MRTPR            0x00000000  /* LB refresh timer prescal*/
 195
 196 /*
 197  * Common settings for all Local Bus SDRAM commands.
 198  * At run time, either BSMA1516 (for CPU 1.1)
 199  *                  or BSMA1617 (for CPU 1.0) (old)
 200  * is OR'ed in too.
 201  */
 202 #define CONFIG_SYS_LBC_LSDMR_COMMON     ( LSDMR_RFCR16          \
 203                                 | LSDMR_PRETOACT7       \
 204                                 | LSDMR_ACTTORW7        \
 205                                 | LSDMR_BL8             \
 206                                 | LSDMR_WRC4            \
 207                                 | LSDMR_CL3             \
 208                                 | LSDMR_RFEN            \
 209                                 )
 210
 211 /*
 212  * The CADMUS registers are connected to CS3 on CDS.
 213  * The new memory map places CADMUS at 0xf8000000.
 214  *
 215  * For BR3, need:
 216  *    Base address of 0xf8000000 = BR[0:16] = 1111 1000 0000 0000 0
 217  *    port-size = 8-bits  = BR[19:20] = 01
 218  *    no parity checking  = BR[21:22] = 00
 219  *    GPMC for MSEL       = BR[24:26] = 000
 220  *    Valid               = BR[31]    = 1
 221  *
 222  * 0    4    8    12   16   20   24   28
 223  * 1111 1000 0000 0000 0000 1000 0000 0001 = f8000801
 224  *
 225  * For OR3, need:
 226  *    1 MB mask for AM,   OR[0:16]  = 1111 1111 1111 0000 0
 227  *    disable buffer ctrl OR[19]    = 0
 228  *    CSNT                OR[20]    = 1
 229  *    ACS                 OR[21:22] = 11
 230  *    XACS                OR[23]    = 1
 231  *    SCY 15 wait states  OR[24:27] = 1111      max is suboptimal but safe
 232  *    SETA                OR[28]    = 0
 233  *    TRLX                OR[29]    = 1
 234  *    EHTR                OR[30]    = 1
 235  *    EAD extra time      OR[31]    = 1
 236  *
 237  * 0    4    8    12   16   20   24   28
 238  * 1111 1111 1111 0000 0000 1111 1111 0111 = fff00ff7
 239  */
 240
 241 #define CONFIG_FSL_CADMUS
 242
 243 #define CADMUS_BASE_ADDR 0xf8000000
 244 #define CONFIG_SYS_BR3_PRELIM   0xf8000801
 245 #define CONFIG_SYS_OR3_PRELIM   0xfff00ff7
 246
 247 #define CONFIG_SYS_INIT_RAM_LOCK        1
 248 #define CONFIG_SYS_INIT_RAM_ADDR        0xe4010000      /* Initial RAM address */
 249 #define CONFIG_SYS_INIT_RAM_SIZE        0x4000      /* Size of used area in RAM */
 250
 251 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 252 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 253
 254 #define CONFIG_SYS_MONITOR_LEN          (256 * 1024) /* Reserve 256 kB for Mon */
 255 #define CONFIG_SYS_MALLOC_LEN           (128 * 1024)    /* Reserved for malloc */
 256
 257 /* Serial Port */
 258 #define CONFIG_CONS_INDEX     2
 259 #define CONFIG_SYS_NS16550
 260 #define CONFIG_SYS_NS16550_SERIAL
 261 #define CONFIG_SYS_NS16550_REG_SIZE    1
 262 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 263
 264 #define CONFIG_SYS_BAUDRATE_TABLE  \
 265         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 266
 267 #define CONFIG_SYS_NS16550_COM1        (CONFIG_SYS_CCSRBAR+0x4500)
 268 #define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_CCSRBAR+0x4600)
 269
 270 /* Use the HUSH parser */
 271 #define CONFIG_SYS_HUSH_PARSER
 272 #ifdef  CONFIG_SYS_HUSH_PARSER
 273 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 274 #endif
 275
 276 /* pass open firmware flat tree */
 277 #define CONFIG_OF_LIBFDT                1
 278 #define CONFIG_OF_BOARD_SETUP           1
 279 #define CONFIG_OF_STDOUT_VIA_ALIAS      1
 280
 281 /*
 282  * I2C
 283  */
 284 #define CONFIG_FSL_I2C          /* Use FSL common I2C driver */
 285 #define CONFIG_HARD_I2C         /* I2C with hardware support*/
 286 #undef  CONFIG_SOFT_I2C                 /* I2C bit-banged */
 287 #define CONFIG_SYS_I2C_SPEED            400000  /* I2C speed and slave address */
 288 #define CONFIG_SYS_I2C_SLAVE            0x7F
 289 #define CONFIG_SYS_I2C_NOPROBES        {0x69}   /* Don't probe these addrs */
 290 #define CONFIG_SYS_I2C_OFFSET           0x3000
 291
 292 /* EEPROM */
 293 #define CONFIG_ID_EEPROM
 294 #define CONFIG_SYS_I2C_EEPROM_CCID
 295 #define CONFIG_SYS_ID_EEPROM
 296 #define CONFIG_SYS_I2C_EEPROM_ADDR     0x57
 297 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
 298
 299 /*
 300  * General PCI
 301  * Addresses are mapped 1-1.
 302  */
 303 #define CONFIG_SYS_PCI1_MEM_VIRT        0x80000000
 304 #define CONFIG_SYS_PCI1_MEM_BUS 0x80000000
 305 #define CONFIG_SYS_PCI1_MEM_PHYS        0x80000000
 306 #define CONFIG_SYS_PCI1_MEM_SIZE        0x20000000      /* 512M */
 307 #define CONFIG_SYS_PCI1_IO_VIRT 0xe2000000
 308 #define CONFIG_SYS_PCI1_IO_BUS  0x00000000
 309 #define CONFIG_SYS_PCI1_IO_PHYS 0xe2000000
 310 #define CONFIG_SYS_PCI1_IO_SIZE 0x00100000      /* 1M */
 311
 312 #define CONFIG_SYS_PCI2_MEM_VIRT        0xa0000000
 313 #define CONFIG_SYS_PCI2_MEM_BUS 0xa0000000
 314 #define CONFIG_SYS_PCI2_MEM_PHYS        0xa0000000
 315 #define CONFIG_SYS_PCI2_MEM_SIZE        0x20000000      /* 512M */
 316 #define CONFIG_SYS_PCI2_IO_VIRT 0xe2100000
 317 #define CONFIG_SYS_PCI2_IO_BUS  0x00000000
 318 #define CONFIG_SYS_PCI2_IO_PHYS 0xe2100000
 319 #define CONFIG_SYS_PCI2_IO_SIZE 0x00100000      /* 1M */
 320
 321 #ifdef CONFIG_LEGACY
 322 #define BRIDGE_ID 17
 323 #define VIA_ID 2
 324 #else
 325 #define BRIDGE_ID 28
 326 #define VIA_ID 4
 327 #endif
 328
 329 #if defined(CONFIG_PCI)
 330
 331 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 332 #define CONFIG_MPC85XX_PCI2
 333
 334 #undef CONFIG_EEPRO100
 335 #undef CONFIG_TULIP
 336
 337 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 338 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057  /* Motorola */
 339
 340 #endif  /* CONFIG_PCI */
 341
 342
 343 #if defined(CONFIG_TSEC_ENET)
 344
 345 #define CONFIG_MII              1       /* MII PHY management */
 346 #define CONFIG_TSEC1    1
 347 #define CONFIG_TSEC1_NAME       "TSEC0"
 348 #define CONFIG_TSEC2    1
 349 #define CONFIG_TSEC2_NAME       "TSEC1"
 350 #define TSEC1_PHY_ADDR          0
 351 #define TSEC2_PHY_ADDR          1
 352 #define TSEC1_PHYIDX            0
 353 #define TSEC2_PHYIDX            0
 354 #define TSEC1_FLAGS             TSEC_GIGABIT
 355 #define TSEC2_FLAGS             TSEC_GIGABIT
 356
 357 /* Options are: TSEC[0-1] */
 358 #define CONFIG_ETHPRIME         "TSEC0"
 359
 360 #endif  /* CONFIG_TSEC_ENET */
 361
 362 /*
 363  * Environment
 364  */
 365 #define CONFIG_ENV_IS_IN_FLASH  1
 366 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE + 0x40000)
 367 #define CONFIG_ENV_SECT_SIZE    0x40000 /* 256K(one sector) for env */
 368 #define CONFIG_ENV_SIZE         0x2000
 369
 370 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download */
 371 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change */
 372
 373 /*
 374  * BOOTP options
 375  */
 376 #define CONFIG_BOOTP_BOOTFILESIZE
 377 #define CONFIG_BOOTP_BOOTPATH
 378 #define CONFIG_BOOTP_GATEWAY
 379 #define CONFIG_BOOTP_HOSTNAME
 380
 381
 382 /*
 383  * Command line configuration.
 384  */
 385 #include <config_cmd_default.h>
 386
 387 #define CONFIG_CMD_PING
 388 #define CONFIG_CMD_I2C
 389 #define CONFIG_CMD_MII
 390 #define CONFIG_CMD_ELF
 391 #define CONFIG_CMD_IRQ
 392 #define CONFIG_CMD_SETEXPR
 393 #define CONFIG_CMD_REGINFO
 394
 395 #if defined(CONFIG_PCI)
 396     #define CONFIG_CMD_PCI
 397 #endif
 398
 399
 400 #undef CONFIG_WATCHDOG                  /* watchdog disabled */
 401
 402 /*
 403  * Miscellaneous configurable options
 404  */
 405 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 406 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 407 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 408 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 409 #define CONFIG_SYS_PROMPT       "=> "           /* Monitor Command Prompt */
 410 #if defined(CONFIG_CMD_KGDB)
 411 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 412 #else
 413 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 414 #endif
 415 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 416 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 417 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
 418 #define CONFIG_SYS_HZ           1000            /* decrementer freq: 1ms ticks */
 419
 420 /*
 421  * For booting Linux, the board info and command line data
 422  * have to be in the first 64 MB of memory, since this is
 423  * the maximum mapped by the Linux kernel during initialization.
 424  */
 425 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial Memory map for Linux*/
 426 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 427
 428 #if defined(CONFIG_CMD_KGDB)
 429 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 430 #define CONFIG_KGDB_SER_INDEX   2       /* which serial port to use */
 431 #endif
 432
 433 /*
 434  * Environment Configuration
 435  */
 436
 437 /* The mac addresses for all ethernet interface */
 438 #if defined(CONFIG_TSEC_ENET)
 439 #define CONFIG_HAS_ETH0
 440 #define CONFIG_ETHADDR   00:E0:0C:00:00:FD
 441 #define CONFIG_HAS_ETH1
 442 #define CONFIG_ETH1ADDR  00:E0:0C:00:01:FD
 443 #define CONFIG_HAS_ETH2
 444 #define CONFIG_ETH2ADDR  00:E0:0C:00:02:FD
 445 #endif
 446
 447 #define CONFIG_IPADDR    192.168.1.253
 448
 449 #define CONFIG_HOSTNAME  unknown
 450 #define CONFIG_ROOTPATH  "/nfsroot"
 451 #define CONFIG_BOOTFILE  "your.uImage"
 452
 453 #define CONFIG_SERVERIP  192.168.1.1
 454 #define CONFIG_GATEWAYIP 192.168.1.1
 455 #define CONFIG_NETMASK   255.255.255.0
 456
 457 #define CONFIG_LOADADDR  200000   /*default location for tftp and bootm*/
 458
 459 #define CONFIG_BOOTDELAY 10       /* -1 disables auto-boot */
 460 #undef  CONFIG_BOOTARGS           /* the boot command will set bootargs*/
 461
 462 #define CONFIG_BAUDRATE 115200
 463
 464 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 465    "netdev=eth0\0"                                                      \
 466    "consoledev=ttyS1\0"                                                 \
 467    "ramdiskaddr=600000\0"                                               \
 468    "ramdiskfile=your.ramdisk.u-boot\0"                                  \
 469    "fdtaddr=400000\0"                                                   \
 470    "fdtfile=your.fdt.dtb\0"
 471
 472 #define CONFIG_NFSBOOTCOMMAND                                           \
 473    "setenv bootargs root=/dev/nfs rw "                                  \
 474       "nfsroot=$serverip:$rootpath "                                    \
 475       "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 476       "console=$consoledev,$baudrate $othbootargs;"                     \
 477    "tftp $loadaddr $bootfile;"                                          \
 478    "tftp $fdtaddr $fdtfile;"                                            \
 479    "bootm $loadaddr - $fdtaddr"
 480
 481 #define CONFIG_RAMBOOTCOMMAND \
 482    "setenv bootargs root=/dev/ram rw "                                  \
 483       "console=$consoledev,$baudrate $othbootargs;"                     \
 484    "tftp $ramdiskaddr $ramdiskfile;"                                    \
 485    "tftp $loadaddr $bootfile;"                                          \
 486    "bootm $loadaddr $ramdiskaddr"
 487
 488 #define CONFIG_BOOTCOMMAND  CONFIG_NFSBOOTCOMMAND
 489
 490 #endif  /* __CONFIG_H */