include/configs/MPC8572DS.h

   1 /*
   2  * Copyright 2007-2008,2010-2011 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * mpc8572ds board configuration file
   9  *
  10  */
  11 #ifndef __CONFIG_H
  12 #define __CONFIG_H
  13
  14 #include "../board/freescale/common/ics307_clk.h"
  15
  16 #ifdef CONFIG_36BIT
  17 #define CONFIG_PHYS_64BIT
  18 #endif
  19
  20 #ifdef CONFIG_NAND
  21 #define CONFIG_NAND_U_BOOT
  22 #define CONFIG_RAMBOOT_NAND
  23 #ifdef CONFIG_NAND_SPL
  24 #define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000
  25 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */
  26 #else
  27 #define CONFIG_SYS_LDSCRIPT $(TOPDIR)/$(CPUDIR)/u-boot-nand.lds
  28 #define CONFIG_SYS_TEXT_BASE    0xf8f82000
  29 #endif /* CONFIG_NAND_SPL */
  30 #endif
  31
  32 #ifndef CONFIG_SYS_TEXT_BASE
  33 #define CONFIG_SYS_TEXT_BASE    0xeff80000
  34 #endif
  35
  36 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  37 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  38 #endif
  39
  40 #ifndef CONFIG_SYS_MONITOR_BASE
  41 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
  42 #endif
  43
  44 /* High Level Configuration Options */
  45 #define CONFIG_BOOKE            1       /* BOOKE */
  46 #define CONFIG_E500             1       /* BOOKE e500 family */
  47 #define CONFIG_MPC8572          1
  48 #define CONFIG_MPC8572DS        1
  49 #define CONFIG_MP               1       /* support multiple processors */
  50
  51 #define CONFIG_FSL_ELBC         1       /* Has Enhanced localbus controller */
  52 #define CONFIG_PCI              1       /* Enable PCI/PCIE */
  53 #define CONFIG_PCIE1            1       /* PCIE controler 1 (slot 1) */
  54 #define CONFIG_PCIE2            1       /* PCIE controler 2 (slot 2) */
  55 #define CONFIG_PCIE3            1       /* PCIE controler 3 (ULI bridge) */
  56 #define CONFIG_FSL_PCI_INIT     1       /* Use common FSL init code */
  57 #define CONFIG_PCI_INDIRECT_BRIDGE 1    /* indirect PCI bridge support */
  58 #define CONFIG_FSL_PCIE_RESET   1       /* need PCIe reset errata */
  59 #define CONFIG_SYS_PCI_64BIT    1       /* enable 64-bit PCI resources */
  60
  61 #define CONFIG_FSL_LAW          1       /* Use common FSL init code */
  62
  63 #define CONFIG_TSEC_ENET                /* tsec ethernet support */
  64 #define CONFIG_ENV_OVERWRITE
  65
  66 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk() /* sysclk for MPC85xx */
  67 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk() /* ddrclk for MPC85xx */
  68 #define CONFIG_ICS307_REFCLK_HZ 33333000  /* ICS307 clock chip ref freq */
  69
  70 /*
  71  * These can be toggled for performance analysis, otherwise use default.
  72  */
  73 #define CONFIG_L2_CACHE                 /* toggle L2 cache */
  74 #define CONFIG_BTB                      /* toggle branch predition */
  75
  76 #define CONFIG_ENABLE_36BIT_PHYS        1
  77
  78 #ifdef CONFIG_PHYS_64BIT
  79 #define CONFIG_ADDR_MAP                 1
  80 #define CONFIG_SYS_NUM_ADDR_MAP         16      /* number of TLB1 entries */
  81 #endif
  82
  83 #define CONFIG_SYS_MEMTEST_START        0x00000000      /* memtest works on */
  84 #define CONFIG_SYS_MEMTEST_END          0x7fffffff
  85 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
  86
  87 /*
  88  * Config the L2 Cache as L2 SRAM
  89  */
  90 #define CONFIG_SYS_INIT_L2_ADDR         0xf8f80000
  91 #ifdef CONFIG_PHYS_64BIT
  92 #define CONFIG_SYS_INIT_L2_ADDR_PHYS            0xff8f80000ull
  93 #else
  94 #define CONFIG_SYS_INIT_L2_ADDR_PHYS            CONFIG_SYS_INIT_L2_ADDR
  95 #endif
  96 #define CONFIG_SYS_L2_SIZE              (512 << 10)
  97 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
  98
  99 #define CONFIG_SYS_CCSRBAR              0xffe00000
 100 #define CONFIG_SYS_CCSRBAR_PHYS_LOW     CONFIG_SYS_CCSRBAR
 101
 102 #if defined(CONFIG_NAND_SPL)
 103 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
 104 #endif
 105
 106 /* DDR Setup */
 107 #define CONFIG_VERY_BIG_RAM
 108 #define CONFIG_SYS_FSL_DDR2
 109 #undef CONFIG_FSL_DDR_INTERACTIVE
 110 #define CONFIG_SPD_EEPROM               /* Use SPD EEPROM for DDR setup */
 111 #define CONFIG_DDR_SPD
 112
 113 #define CONFIG_DDR_ECC
 114 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 115 #define CONFIG_MEM_INIT_VALUE   0xDeadBeef
 116
 117 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 118 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 119
 120 #define CONFIG_NUM_DDR_CONTROLLERS      2
 121 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 122 #define CONFIG_CHIP_SELECTS_PER_CTRL    2
 123
 124 /* I2C addresses of SPD EEPROMs */
 125 #define CONFIG_SYS_SPD_BUS_NUM          1       /* SPD EEPROMS locate on I2C bus 1 */
 126 #define SPD_EEPROM_ADDRESS1     0x51    /* CTLR 0 DIMM 0 */
 127 #define SPD_EEPROM_ADDRESS2     0x52    /* CTLR 1 DIMM 0 */
 128
 129 /* These are used when DDR doesn't use SPD.  */
 130 #define CONFIG_SYS_SDRAM_SIZE           512             /* DDR is 512MB */
 131 #define CONFIG_SYS_DDR_CS0_BNDS         0x0000001F
 132 #define CONFIG_SYS_DDR_CS0_CONFIG       0x80010202      /* Enable, no interleaving */
 133 #define CONFIG_SYS_DDR_TIMING_3         0x00020000
 134 #define CONFIG_SYS_DDR_TIMING_0         0x00260802
 135 #define CONFIG_SYS_DDR_TIMING_1         0x626b2634
 136 #define CONFIG_SYS_DDR_TIMING_2         0x062874cf
 137 #define CONFIG_SYS_DDR_MODE_1           0x00440462
 138 #define CONFIG_SYS_DDR_MODE_2           0x00000000
 139 #define CONFIG_SYS_DDR_INTERVAL         0x0c300100
 140 #define CONFIG_SYS_DDR_DATA_INIT        0xdeadbeef
 141 #define CONFIG_SYS_DDR_CLK_CTRL         0x00800000
 142 #define CONFIG_SYS_DDR_OCD_CTRL         0x00000000
 143 #define CONFIG_SYS_DDR_OCD_STATUS       0x00000000
 144 #define CONFIG_SYS_DDR_CONTROL          0xc3000008      /* Type = DDR2 */
 145 #define CONFIG_SYS_DDR_CONTROL2         0x24400000
 146
 147 #define CONFIG_SYS_DDR_ERR_INT_EN       0x0000000d
 148 #define CONFIG_SYS_DDR_ERR_DIS          0x00000000
 149 #define CONFIG_SYS_DDR_SBE              0x00010000
 150
 151 /*
 152  * Make sure required options are set
 153  */
 154 #ifndef CONFIG_SPD_EEPROM
 155 #error ("CONFIG_SPD_EEPROM is required")
 156 #endif
 157
 158 #undef CONFIG_CLOCKS_IN_MHZ
 159
 160 /*
 161  * Memory map
 162  *
 163  * 0x0000_0000  0x7fff_ffff     DDR                     2G Cacheable
 164  * 0x8000_0000  0xbfff_ffff     PCI Express Mem         1G non-cacheable
 165  * 0xc000_0000  0xdfff_ffff     PCI                     512M non-cacheable
 166  * 0xe100_0000  0xe3ff_ffff     PCI IO range            4M non-cacheable
 167  *
 168  * Localbus cacheable (TBD)
 169  * 0xXXXX_XXXX  0xXXXX_XXXX     SRAM                    YZ M Cacheable
 170  *
 171  * Localbus non-cacheable
 172  * 0xe000_0000  0xe80f_ffff     Promjet/free            128M non-cacheable
 173  * 0xe800_0000  0xefff_ffff     FLASH                   128M non-cacheable
 174  * 0xffa0_0000  0xffaf_ffff     NAND                    1M non-cacheable
 175  * 0xffdf_0000  0xffdf_7fff     PIXIS                   32K non-cacheable TLB0
 176  * 0xffd0_0000  0xffd0_3fff     L1 for stack            16K Cacheable TLB0
 177  * 0xffe0_0000  0xffef_ffff     CCSR                    1M non-cacheable
 178  */
 179
 180 /*
 181  * Local Bus Definitions
 182  */
 183 #define CONFIG_SYS_FLASH_BASE           0xe0000000      /* start of FLASH 128M */
 184 #ifdef CONFIG_PHYS_64BIT
 185 #define CONFIG_SYS_FLASH_BASE_PHYS      0xfe0000000ull
 186 #else
 187 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 188 #endif
 189
 190
 191 #define CONFIG_FLASH_BR_PRELIM \
 192         (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000) | BR_PS_16 | BR_V)
 193 #define CONFIG_FLASH_OR_PRELIM 0xf8000ff7
 194
 195 #define CONFIG_SYS_BR1_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V)
 196 #define CONFIG_SYS_OR1_PRELIM   0xf8000ff7
 197
 198 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 199 #define CONFIG_SYS_FLASH_QUIET_TEST
 200 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
 201
 202 #define CONFIG_SYS_MAX_FLASH_BANKS      2               /* number of banks */
 203 #define CONFIG_SYS_MAX_FLASH_SECT       1024            /* sectors per device */
 204 #undef  CONFIG_SYS_FLASH_CHECKSUM
 205 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000           /* Flash Erase Timeout (ms) */
 206 #define CONFIG_SYS_FLASH_WRITE_TOUT     500             /* Flash Write Timeout (ms) */
 207
 208 #if defined(CONFIG_RAMBOOT_NAND)
 209 #define CONFIG_SYS_RAMBOOT
 210 #define CONFIG_SYS_EXTRA_ENV_RELOC
 211 #else
 212 #undef CONFIG_SYS_RAMBOOT
 213 #endif
 214
 215 #define CONFIG_FLASH_CFI_DRIVER
 216 #define CONFIG_SYS_FLASH_CFI
 217 #define CONFIG_SYS_FLASH_EMPTY_INFO
 218 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7
 219
 220 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
 221
 222 #define CONFIG_HWCONFIG                 /* enable hwconfig */
 223 #define CONFIG_FSL_PIXIS        1       /* use common PIXIS code */
 224 #define PIXIS_BASE      0xffdf0000      /* PIXIS registers */
 225 #ifdef CONFIG_PHYS_64BIT
 226 #define PIXIS_BASE_PHYS 0xfffdf0000ull
 227 #else
 228 #define PIXIS_BASE_PHYS PIXIS_BASE
 229 #endif
 230
 231 #define CONFIG_SYS_BR3_PRELIM   (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V)
 232 #define CONFIG_SYS_OR3_PRELIM           0xffffeff7      /* 32KB but only 4k mapped */
 233
 234 #define PIXIS_ID                0x0     /* Board ID at offset 0 */
 235 #define PIXIS_VER               0x1     /* Board version at offset 1 */
 236 #define PIXIS_PVER              0x2     /* PIXIS FPGA version at offset 2 */
 237 #define PIXIS_CSR               0x3     /* PIXIS General control/status register */
 238 #define PIXIS_RST               0x4     /* PIXIS Reset Control register */
 239 #define PIXIS_PWR               0x5     /* PIXIS Power status register */
 240 #define PIXIS_AUX               0x6     /* Auxiliary 1 register */
 241 #define PIXIS_SPD               0x7     /* Register for SYSCLK speed */
 242 #define PIXIS_AUX2              0x8     /* Auxiliary 2 register */
 243 #define PIXIS_VCTL              0x10    /* VELA Control Register */
 244 #define PIXIS_VSTAT             0x11    /* VELA Status Register */
 245 #define PIXIS_VCFGEN0           0x12    /* VELA Config Enable 0 */
 246 #define PIXIS_VCFGEN1           0x13    /* VELA Config Enable 1 */
 247 #define PIXIS_VCORE0            0x14    /* VELA VCORE0 Register */
 248 #define PIXIS_VBOOT             0x16    /* VELA VBOOT Register */
 249 #define PIXIS_VBOOT_LBMAP       0xc0    /* VBOOT - CFG_LBMAP */
 250 #define PIXIS_VBOOT_LBMAP_NOR0  0x00    /* cfg_lbmap - boot from NOR 0 */
 251 #define PIXIS_VBOOT_LBMAP_PJET  0x01    /* cfg_lbmap - boot from projet */
 252 #define PIXIS_VBOOT_LBMAP_NAND  0x02    /* cfg_lbmap - boot from NAND */
 253 #define PIXIS_VBOOT_LBMAP_NOR1  0x03    /* cfg_lbmap - boot from NOR 1 */
 254 #define PIXIS_VSPEED0           0x17    /* VELA VSpeed 0 */
 255 #define PIXIS_VSPEED1           0x18    /* VELA VSpeed 1 */
 256 #define PIXIS_VSPEED2           0x19    /* VELA VSpeed 2 */
 257 #define PIXIS_VSYSCLK0          0x1C    /* VELA SYSCLK0 Register */
 258 #define PIXIS_VSYSCLK1          0x1D    /* VELA SYSCLK1 Register */
 259 #define PIXIS_VSYSCLK2          0x1E    /* VELA SYSCLK2 Register */
 260 #define PIXIS_VDDRCLK0          0x1F    /* VELA DDRCLK0 Register */
 261 #define PIXIS_VDDRCLK1          0x20    /* VELA DDRCLK1 Register */
 262 #define PIXIS_VDDRCLK2          0x21    /* VELA DDRCLK2 Register */
 263 #define PIXIS_VWATCH            0x24    /* Watchdog Register */
 264 #define PIXIS_LED               0x25    /* LED Register */
 265
 266 #define PIXIS_SPD_SYSCLK_MASK           0x7             /* SYSCLK option */
 267
 268 /* old pixis referenced names */
 269 #define PIXIS_VCLKH             0x19    /* VELA VCLKH register */
 270 #define PIXIS_VCLKL             0x1A    /* VELA VCLKL register */
 271 #define CONFIG_SYS_PIXIS_VBOOT_MASK     0xc0
 272 #define PIXIS_VSPEED2_TSEC1SER  0x8
 273 #define PIXIS_VSPEED2_TSEC2SER  0x4
 274 #define PIXIS_VSPEED2_TSEC3SER  0x2
 275 #define PIXIS_VSPEED2_TSEC4SER  0x1
 276 #define PIXIS_VCFGEN1_TSEC1SER  0x20
 277 #define PIXIS_VCFGEN1_TSEC2SER  0x20
 278 #define PIXIS_VCFGEN1_TSEC3SER  0x20
 279 #define PIXIS_VCFGEN1_TSEC4SER  0x20
 280 #define PIXIS_VSPEED2_MASK      (PIXIS_VSPEED2_TSEC1SER \
 281                                         | PIXIS_VSPEED2_TSEC2SER \
 282                                         | PIXIS_VSPEED2_TSEC3SER \
 283                                         | PIXIS_VSPEED2_TSEC4SER)
 284 #define PIXIS_VCFGEN1_MASK      (PIXIS_VCFGEN1_TSEC1SER \
 285                                         | PIXIS_VCFGEN1_TSEC2SER \
 286                                         | PIXIS_VCFGEN1_TSEC3SER \
 287                                         | PIXIS_VCFGEN1_TSEC4SER)
 288
 289 #define CONFIG_SYS_INIT_RAM_LOCK        1
 290 #define CONFIG_SYS_INIT_RAM_ADDR        0xffd00000      /* Initial L1 address */
 291 #define CONFIG_SYS_INIT_RAM_SIZE        0x00004000      /* Size of used area in RAM */
 292
 293 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 294 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 295
 296 #define CONFIG_SYS_MONITOR_LEN          (256 * 1024) /* Reserve 256 kB for Mon */
 297 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)   /* Reserved for malloc */
 298
 299 #ifndef CONFIG_NAND_SPL
 300 #define CONFIG_SYS_NAND_BASE            0xffa00000
 301 #ifdef CONFIG_PHYS_64BIT
 302 #define CONFIG_SYS_NAND_BASE_PHYS       0xfffa00000ull
 303 #else
 304 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 305 #endif
 306 #else
 307 #define CONFIG_SYS_NAND_BASE            0xfff00000
 308 #ifdef CONFIG_PHYS_64BIT
 309 #define CONFIG_SYS_NAND_BASE_PHYS       0xffff00000ull
 310 #else
 311 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 312 #endif
 313 #endif
 314
 315 #define CONFIG_SYS_NAND_BASE_LIST     { CONFIG_SYS_NAND_BASE,\
 316                                 CONFIG_SYS_NAND_BASE + 0x40000, \
 317                                 CONFIG_SYS_NAND_BASE + 0x80000,\
 318                                 CONFIG_SYS_NAND_BASE + 0xC0000}
 319 #define CONFIG_SYS_MAX_NAND_DEVICE    4
 320 #define CONFIG_MTD_NAND_VERIFY_WRITE
 321 #define CONFIG_CMD_NAND         1
 322 #define CONFIG_NAND_FSL_ELBC    1
 323 #define CONFIG_SYS_NAND_BLOCK_SIZE    (128 * 1024)
 324 #define CONFIG_SYS_NAND_MAX_OOBFREE     5
 325 #define CONFIG_SYS_NAND_MAX_ECCPOS      56
 326
 327 /* NAND boot: 4K NAND loader config */
 328 #define CONFIG_SYS_NAND_SPL_SIZE        0x1000
 329 #define CONFIG_SYS_NAND_U_BOOT_SIZE     ((512 << 10) - 0x2000)
 330 #define CONFIG_SYS_NAND_U_BOOT_DST      (CONFIG_SYS_INIT_L2_ADDR)
 331 #define CONFIG_SYS_NAND_U_BOOT_START \
 332                 (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_NAND_SPL_SIZE)
 333 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (0)
 334 #define CONFIG_SYS_NAND_U_BOOT_RELOC    (CONFIG_SYS_INIT_L2_END - 0x2000)
 335 #define CONFIG_SYS_NAND_U_BOOT_RELOC_SP ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF)
 336
 337
 338 /* NAND flash config */
 339 #define CONFIG_SYS_NAND_BR_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 340                                | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 341                                | BR_PS_8               /* Port Size = 8 bit */ \
 342                                | BR_MS_FCM             /* MSEL = FCM */ \
 343                                | BR_V)                 /* valid */
 344 #define CONFIG_SYS_NAND_OR_PRELIM  (0xFFFC0000        /* length 256K */ \
 345                                | OR_FCM_PGS            /* Large Page*/ \
 346                                | OR_FCM_CSCT \
 347                                | OR_FCM_CST \
 348                                | OR_FCM_CHT \
 349                                | OR_FCM_SCY_1 \
 350                                | OR_FCM_TRLX \
 351                                | OR_FCM_EHTR)
 352
 353 #ifdef CONFIG_RAMBOOT_NAND
 354 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 355 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 356 #define CONFIG_SYS_BR2_PRELIM  CONFIG_FLASH_BR_PRELIM   /* NOR Base Address */
 357 #define CONFIG_SYS_OR2_PRELIM  CONFIG_FLASH_OR_PRELIM   /* NOR Options */
 358 #else
 359 #define CONFIG_SYS_BR0_PRELIM  CONFIG_FLASH_BR_PRELIM   /* NOR Base Address */
 360 #define CONFIG_SYS_OR0_PRELIM  CONFIG_FLASH_OR_PRELIM   /* NOR Options */
 361 #define CONFIG_SYS_BR2_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 362 #define CONFIG_SYS_OR2_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 363 #endif
 364 #define CONFIG_SYS_BR4_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0x40000) \
 365                                | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 366                                | BR_PS_8               /* Port Size = 8 bit */ \
 367                                | BR_MS_FCM             /* MSEL = FCM */ \
 368                                | BR_V)                 /* valid */
 369 #define CONFIG_SYS_OR4_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 370 #define CONFIG_SYS_BR5_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0x80000)\
 371                                | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 372                                | BR_PS_8               /* Port Size = 8 bit */ \
 373                                | BR_MS_FCM             /* MSEL = FCM */ \
 374                                | BR_V)                 /* valid */
 375 #define CONFIG_SYS_OR5_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 376
 377 #define CONFIG_SYS_BR6_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0xc0000)\
 378                                | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 379                                | BR_PS_8               /* Port Size = 8 bit */ \
 380                                | BR_MS_FCM             /* MSEL = FCM */ \
 381                                | BR_V)                 /* valid */
 382 #define CONFIG_SYS_OR6_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 383
 384
 385 /* Serial Port - controlled on board with jumper J8
 386  * open - index 2
 387  * shorted - index 1
 388  */
 389 #define CONFIG_CONS_INDEX       1
 390 #define CONFIG_SYS_NS16550
 391 #define CONFIG_SYS_NS16550_SERIAL
 392 #define CONFIG_SYS_NS16550_REG_SIZE     1
 393 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 394 #ifdef CONFIG_NAND_SPL
 395 #define CONFIG_NS16550_MIN_FUNCTIONS
 396 #endif
 397
 398 #define CONFIG_SYS_BAUDRATE_TABLE       \
 399         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 400
 401 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
 402 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
 403
 404 /* Use the HUSH parser */
 405 #define CONFIG_SYS_HUSH_PARSER
 406
 407 /*
 408  * Pass open firmware flat tree
 409  */
 410 #define CONFIG_OF_LIBFDT                1
 411 #define CONFIG_OF_BOARD_SETUP           1
 412 #define CONFIG_OF_STDOUT_VIA_ALIAS      1
 413
 414 /* new uImage format support */
 415 #define CONFIG_FIT              1
 416 #define CONFIG_FIT_VERBOSE      1 /* enable fit_format_{error,warning}() */
 417
 418 /* I2C */
 419 #define CONFIG_SYS_I2C
 420 #define CONFIG_SYS_I2C_FSL
 421 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 422 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 423 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 424 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 425 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 426 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x3100
 427 #define CONFIG_SYS_I2C_NOPROBES         { {0, 0x29} }
 428 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 429
 430 /*
 431  * I2C2 EEPROM
 432  */
 433 #define CONFIG_ID_EEPROM
 434 #ifdef CONFIG_ID_EEPROM
 435 #define CONFIG_SYS_I2C_EEPROM_NXID
 436 #endif
 437 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 438 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 439 #define CONFIG_SYS_EEPROM_BUS_NUM       1
 440
 441 /*
 442  * General PCI
 443  * Memory space is mapped 1-1, but I/O space must start from 0.
 444  */
 445
 446 /* controller 3, direct to uli, tgtid 3, Base address 8000 */
 447 #define CONFIG_SYS_PCIE3_NAME           "ULI"
 448 #define CONFIG_SYS_PCIE3_MEM_VIRT       0x80000000
 449 #ifdef CONFIG_PHYS_64BIT
 450 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 451 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc00000000ull
 452 #else
 453 #define CONFIG_SYS_PCIE3_MEM_BUS        0x80000000
 454 #define CONFIG_SYS_PCIE3_MEM_PHYS       0x80000000
 455 #endif
 456 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
 457 #define CONFIG_SYS_PCIE3_IO_VIRT        0xffc00000
 458 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000
 459 #ifdef CONFIG_PHYS_64BIT
 460 #define CONFIG_SYS_PCIE3_IO_PHYS        0xfffc00000ull
 461 #else
 462 #define CONFIG_SYS_PCIE3_IO_PHYS        0xffc00000
 463 #endif
 464 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 465
 466 /* controller 2, Slot 2, tgtid 2, Base address 9000 */
 467 #define CONFIG_SYS_PCIE2_NAME           "Slot 1"
 468 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 469 #ifdef CONFIG_PHYS_64BIT
 470 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 471 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 472 #else
 473 #define CONFIG_SYS_PCIE2_MEM_BUS        0xa0000000
 474 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xa0000000
 475 #endif
 476 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 477 #define CONFIG_SYS_PCIE2_IO_VIRT        0xffc10000
 478 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000
 479 #ifdef CONFIG_PHYS_64BIT
 480 #define CONFIG_SYS_PCIE2_IO_PHYS        0xfffc10000ull
 481 #else
 482 #define CONFIG_SYS_PCIE2_IO_PHYS        0xffc10000
 483 #endif
 484 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 485
 486 /* controller 1, Slot 1, tgtid 1, Base address a000 */
 487 #define CONFIG_SYS_PCIE1_NAME           "Slot 2"
 488 #define CONFIG_SYS_PCIE1_MEM_VIRT       0xc0000000
 489 #ifdef CONFIG_PHYS_64BIT
 490 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 491 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc40000000ull
 492 #else
 493 #define CONFIG_SYS_PCIE1_MEM_BUS        0xc0000000
 494 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc0000000
 495 #endif
 496 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 497 #define CONFIG_SYS_PCIE1_IO_VIRT        0xffc20000
 498 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
 499 #ifdef CONFIG_PHYS_64BIT
 500 #define CONFIG_SYS_PCIE1_IO_PHYS        0xfffc20000ull
 501 #else
 502 #define CONFIG_SYS_PCIE1_IO_PHYS        0xffc20000
 503 #endif
 504 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 505
 506 #if defined(CONFIG_PCI)
 507
 508 /*PCIE video card used*/
 509 #define VIDEO_IO_OFFSET         CONFIG_SYS_PCIE1_IO_VIRT
 510
 511 /* video */
 512 #define CONFIG_VIDEO
 513
 514 #if defined(CONFIG_VIDEO)
 515 #define CONFIG_BIOSEMU
 516 #define CONFIG_CFB_CONSOLE
 517 #define CONFIG_VIDEO_SW_CURSOR
 518 #define CONFIG_VGA_AS_SINGLE_DEVICE
 519 #define CONFIG_ATI_RADEON_FB
 520 #define CONFIG_VIDEO_LOGO
 521 /*#define CONFIG_CONSOLE_CURSOR*/
 522 #define CONFIG_SYS_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET
 523 #endif
 524
 525 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 526
 527 #undef CONFIG_EEPRO100
 528 #undef CONFIG_TULIP
 529 #undef CONFIG_RTL8139
 530 #define CONFIG_E1000                    /* Define e1000 pci Ethernet card */
 531
 532 #ifndef CONFIG_PCI_PNP
 533         #define PCI_ENET0_IOADDR        CONFIG_SYS_PCIE3_IO_BUS
 534         #define PCI_ENET0_MEMADDR       CONFIG_SYS_PCIE3_IO_BUS
 535         #define PCI_IDSEL_NUMBER        0x11    /* IDSEL = AD11 */
 536 #endif
 537
 538 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 539 #define CONFIG_DOS_PARTITION
 540 #define CONFIG_SCSI_AHCI
 541
 542 #ifdef CONFIG_SCSI_AHCI
 543 #define CONFIG_LIBATA
 544 #define CONFIG_SATA_ULI5288
 545 #define CONFIG_SYS_SCSI_MAX_SCSI_ID     4
 546 #define CONFIG_SYS_SCSI_MAX_LUN 1
 547 #define CONFIG_SYS_SCSI_MAX_DEVICE      (CONFIG_SYS_SCSI_MAX_SCSI_ID * CONFIG_SYS_SCSI_MAX_LUN)
 548 #define CONFIG_SYS_SCSI_MAXDEVICE       CONFIG_SYS_SCSI_MAX_DEVICE
 549 #endif /* SCSI */
 550
 551 #endif  /* CONFIG_PCI */
 552
 553
 554 #if defined(CONFIG_TSEC_ENET)
 555
 556 #define CONFIG_MII              1       /* MII PHY management */
 557 #define CONFIG_MII_DEFAULT_TSEC 1       /* Allow unregistered phys */
 558 #define CONFIG_TSEC1    1
 559 #define CONFIG_TSEC1_NAME       "eTSEC1"
 560 #define CONFIG_TSEC2    1
 561 #define CONFIG_TSEC2_NAME       "eTSEC2"
 562 #define CONFIG_TSEC3    1
 563 #define CONFIG_TSEC3_NAME       "eTSEC3"
 564 #define CONFIG_TSEC4    1
 565 #define CONFIG_TSEC4_NAME       "eTSEC4"
 566
 567 #define CONFIG_PIXIS_SGMII_CMD
 568 #define CONFIG_FSL_SGMII_RISER  1
 569 #define SGMII_RISER_PHY_OFFSET  0x1c
 570
 571 #ifdef CONFIG_FSL_SGMII_RISER
 572 #define CONFIG_SYS_TBIPA_VALUE          0x10 /* avoid conflict with eTSEC4 paddr */
 573 #endif
 574
 575 #define TSEC1_PHY_ADDR          0
 576 #define TSEC2_PHY_ADDR          1
 577 #define TSEC3_PHY_ADDR          2
 578 #define TSEC4_PHY_ADDR          3
 579
 580 #define TSEC1_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 581 #define TSEC2_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 582 #define TSEC3_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 583 #define TSEC4_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 584
 585 #define TSEC1_PHYIDX            0
 586 #define TSEC2_PHYIDX            0
 587 #define TSEC3_PHYIDX            0
 588 #define TSEC4_PHYIDX            0
 589
 590 #define CONFIG_ETHPRIME         "eTSEC1"
 591
 592 #define CONFIG_PHY_GIGE         1       /* Include GbE speed/duplex detection */
 593 #endif  /* CONFIG_TSEC_ENET */
 594
 595 /*
 596  * Environment
 597  */
 598
 599 #if defined(CONFIG_SYS_RAMBOOT)
 600 #if defined(CONFIG_RAMBOOT_NAND)
 601 #define CONFIG_ENV_IS_IN_NAND   1
 602 #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
 603 #define CONFIG_ENV_OFFSET       ((512 * 1024)\
 604                                 + CONFIG_SYS_NAND_BLOCK_SIZE)
 605 #endif
 606
 607 #else
 608         #define CONFIG_ENV_IS_IN_FLASH  1
 609         #if CONFIG_SYS_MONITOR_BASE > 0xfff80000
 610         #define CONFIG_ENV_ADDR 0xfff80000
 611         #else
 612         #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 613         #endif
 614         #define CONFIG_ENV_SIZE 0x2000
 615         #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 616 #endif
 617
 618 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download */
 619 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change */
 620
 621 /*
 622  * Command line configuration.
 623  */
 624 #include <config_cmd_default.h>
 625
 626 #define CONFIG_CMD_ERRATA
 627 #define CONFIG_CMD_IRQ
 628 #define CONFIG_CMD_PING
 629 #define CONFIG_CMD_I2C
 630 #define CONFIG_CMD_MII
 631 #define CONFIG_CMD_ELF
 632 #define CONFIG_CMD_SETEXPR
 633 #define CONFIG_CMD_REGINFO
 634
 635 #if defined(CONFIG_PCI)
 636 #define CONFIG_CMD_PCI
 637 #define CONFIG_CMD_NET
 638 #define CONFIG_CMD_SCSI
 639 #define CONFIG_CMD_EXT2
 640 #endif
 641
 642 /*
 643  * USB
 644  */
 645 #define CONFIG_USB_EHCI
 646
 647 #ifdef CONFIG_USB_EHCI
 648 #define CONFIG_CMD_USB
 649 #define CONFIG_USB_EHCI_PCI
 650 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 651 #define CONFIG_USB_STORAGE
 652 #define CONFIG_PCI_EHCI_DEVICE                  0
 653 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS      2
 654 #endif
 655
 656 #undef CONFIG_WATCHDOG                  /* watchdog disabled */
 657
 658 /*
 659  * Miscellaneous configurable options
 660  */
 661 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 662 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 663 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 664 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 665 #if defined(CONFIG_CMD_KGDB)
 666 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 667 #else
 668 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 669 #endif
 670 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 671 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 672 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
 673
 674 /*
 675  * For booting Linux, the board info and command line data
 676  * have to be in the first 64 MB of memory, since this is
 677  * the maximum mapped by the Linux kernel during initialization.
 678  */
 679 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial Memory map for Linux*/
 680 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 681
 682 #if defined(CONFIG_CMD_KGDB)
 683 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 684 #endif
 685
 686 /*
 687  * Environment Configuration
 688  */
 689
 690 /* The mac addresses for all ethernet interface */
 691 #if defined(CONFIG_TSEC_ENET)
 692 #define CONFIG_HAS_ETH0
 693 #define CONFIG_ETHADDR  00:E0:0C:02:00:FD
 694 #define CONFIG_HAS_ETH1
 695 #define CONFIG_ETH1ADDR 00:E0:0C:02:01:FD
 696 #define CONFIG_HAS_ETH2
 697 #define CONFIG_ETH2ADDR 00:E0:0C:02:02:FD
 698 #define CONFIG_HAS_ETH3
 699 #define CONFIG_ETH3ADDR 00:E0:0C:02:03:FD
 700 #endif
 701
 702 #define CONFIG_IPADDR           192.168.1.254
 703
 704 #define CONFIG_HOSTNAME         unknown
 705 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 706 #define CONFIG_BOOTFILE         "uImage"
 707 #define CONFIG_UBOOTPATH        u-boot.bin      /* U-Boot image on TFTP server */
 708
 709 #define CONFIG_SERVERIP         192.168.1.1
 710 #define CONFIG_GATEWAYIP        192.168.1.1
 711 #define CONFIG_NETMASK          255.255.255.0
 712
 713 /* default location for tftp and bootm */
 714 #define CONFIG_LOADADDR         1000000
 715
 716 #define CONFIG_BOOTDELAY 10     /* -1 disables auto-boot */
 717 #undef  CONFIG_BOOTARGS         /* the boot command will set bootargs */
 718
 719 #define CONFIG_BAUDRATE 115200
 720
 721 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 722 "hwconfig=fsl_ddr:ctlr_intlv=bank,bank_intlv=cs0_cs1,ecc=off\0"         \
 723 "netdev=eth0\0"                                         \
 724 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"                             \
 725 "tftpflash=tftpboot $loadaddr $uboot; "                 \
 726         "protect off " __stringify(CONFIG_SYS_TEXT_BASE)        \
 727                 " +$filesize; " \
 728         "erase " __stringify(CONFIG_SYS_TEXT_BASE)              \
 729                 " +$filesize; " \
 730         "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE)     \
 731                 " $filesize; "  \
 732         "protect on " __stringify(CONFIG_SYS_TEXT_BASE)         \
 733                 " +$filesize; " \
 734         "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE)    \
 735                 " $filesize\0"  \
 736 "consoledev=ttyS0\0"                            \
 737 "ramdiskaddr=2000000\0"                 \
 738 "ramdiskfile=8572ds/ramdisk.uboot\0"            \
 739 "fdtaddr=c00000\0"                              \
 740 "fdtfile=8572ds/mpc8572ds.dtb\0"                \
 741 "bdev=sda3\0"
 742
 743 #define CONFIG_HDBOOT                           \
 744  "setenv bootargs root=/dev/$bdev rw "          \
 745  "console=$consoledev,$baudrate $othbootargs;"  \
 746  "tftp $loadaddr $bootfile;"                    \
 747  "tftp $fdtaddr $fdtfile;"                      \
 748  "bootm $loadaddr - $fdtaddr"
 749
 750 #define CONFIG_NFSBOOTCOMMAND           \
 751  "setenv bootargs root=/dev/nfs rw "    \
 752  "nfsroot=$serverip:$rootpath "         \
 753  "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 754  "console=$consoledev,$baudrate $othbootargs;"  \
 755  "tftp $loadaddr $bootfile;"            \
 756  "tftp $fdtaddr $fdtfile;"              \
 757  "bootm $loadaddr - $fdtaddr"
 758
 759 #define CONFIG_RAMBOOTCOMMAND           \
 760  "setenv bootargs root=/dev/ram rw "    \
 761  "console=$consoledev,$baudrate $othbootargs;"  \
 762  "tftp $ramdiskaddr $ramdiskfile;"      \
 763  "tftp $loadaddr $bootfile;"            \
 764  "tftp $fdtaddr $fdtfile;"              \
 765  "bootm $loadaddr $ramdiskaddr $fdtaddr"
 766
 767 #define CONFIG_BOOTCOMMAND              CONFIG_HDBOOT
 768
 769 #endif  /* __CONFIG_H */