include/configs/MPC8572DS.h

   1 /*
   2  * Copyright 2007-2008,2010-2011 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * mpc8572ds board configuration file
   9  *
  10  */
  11 #ifndef __CONFIG_H
  12 #define __CONFIG_H
  13
  14 #include "../board/freescale/common/ics307_clk.h"
  15
  16 #ifdef CONFIG_36BIT
  17 #define CONFIG_PHYS_64BIT
  18 #endif
  19
  20 #ifdef CONFIG_NAND
  21 #define CONFIG_NAND_U_BOOT
  22 #define CONFIG_RAMBOOT_NAND
  23 #ifdef CONFIG_NAND_SPL
  24 #define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000
  25 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */
  26 #else
  27 #define CONFIG_SYS_LDSCRIPT $(TOPDIR)/$(CPUDIR)/u-boot-nand.lds
  28 #define CONFIG_SYS_TEXT_BASE    0xf8f82000
  29 #endif /* CONFIG_NAND_SPL */
  30 #endif
  31
  32 #ifndef CONFIG_SYS_TEXT_BASE
  33 #define CONFIG_SYS_TEXT_BASE    0xeff80000
  34 #endif
  35
  36 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  37 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  38 #endif
  39
  40 #ifndef CONFIG_SYS_MONITOR_BASE
  41 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
  42 #endif
  43
  44 /* High Level Configuration Options */
  45 #define CONFIG_BOOKE            1       /* BOOKE */
  46 #define CONFIG_E500             1       /* BOOKE e500 family */
  47 #define CONFIG_MPC85xx          1       /* MPC8540/60/55/41/48 */
  48 #define CONFIG_MPC8572          1
  49 #define CONFIG_MPC8572DS        1
  50 #define CONFIG_MP               1       /* support multiple processors */
  51
  52 #define CONFIG_FSL_ELBC         1       /* Has Enhanced localbus controller */
  53 #define CONFIG_PCI              1       /* Enable PCI/PCIE */
  54 #define CONFIG_PCIE1            1       /* PCIE controler 1 (slot 1) */
  55 #define CONFIG_PCIE2            1       /* PCIE controler 2 (slot 2) */
  56 #define CONFIG_PCIE3            1       /* PCIE controler 3 (ULI bridge) */
  57 #define CONFIG_FSL_PCI_INIT     1       /* Use common FSL init code */
  58 #define CONFIG_PCI_INDIRECT_BRIDGE 1    /* indirect PCI bridge support */
  59 #define CONFIG_FSL_PCIE_RESET   1       /* need PCIe reset errata */
  60 #define CONFIG_SYS_PCI_64BIT    1       /* enable 64-bit PCI resources */
  61
  62 #define CONFIG_FSL_LAW          1       /* Use common FSL init code */
  63
  64 #define CONFIG_TSEC_ENET                /* tsec ethernet support */
  65 #define CONFIG_ENV_OVERWRITE
  66
  67 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk() /* sysclk for MPC85xx */
  68 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk() /* ddrclk for MPC85xx */
  69 #define CONFIG_ICS307_REFCLK_HZ 33333000  /* ICS307 clock chip ref freq */
  70
  71 /*
  72  * These can be toggled for performance analysis, otherwise use default.
  73  */
  74 #define CONFIG_L2_CACHE                 /* toggle L2 cache */
  75 #define CONFIG_BTB                      /* toggle branch predition */
  76
  77 #define CONFIG_ENABLE_36BIT_PHYS        1
  78
  79 #ifdef CONFIG_PHYS_64BIT
  80 #define CONFIG_ADDR_MAP                 1
  81 #define CONFIG_SYS_NUM_ADDR_MAP         16      /* number of TLB1 entries */
  82 #endif
  83
  84 #define CONFIG_SYS_MEMTEST_START        0x00000000      /* memtest works on */
  85 #define CONFIG_SYS_MEMTEST_END          0x7fffffff
  86 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
  87
  88 /*
  89  * Config the L2 Cache as L2 SRAM
  90  */
  91 #define CONFIG_SYS_INIT_L2_ADDR         0xf8f80000
  92 #ifdef CONFIG_PHYS_64BIT
  93 #define CONFIG_SYS_INIT_L2_ADDR_PHYS            0xff8f80000ull
  94 #else
  95 #define CONFIG_SYS_INIT_L2_ADDR_PHYS            CONFIG_SYS_INIT_L2_ADDR
  96 #endif
  97 #define CONFIG_SYS_L2_SIZE              (512 << 10)
  98 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
  99
 100 #define CONFIG_SYS_CCSRBAR              0xffe00000
 101 #define CONFIG_SYS_CCSRBAR_PHYS_LOW     CONFIG_SYS_CCSRBAR
 102
 103 #if defined(CONFIG_NAND_SPL)
 104 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
 105 #endif
 106
 107 /* DDR Setup */
 108 #define CONFIG_VERY_BIG_RAM
 109 #define CONFIG_SYS_FSL_DDR2
 110 #undef CONFIG_FSL_DDR_INTERACTIVE
 111 #define CONFIG_SPD_EEPROM               /* Use SPD EEPROM for DDR setup */
 112 #define CONFIG_DDR_SPD
 113
 114 #define CONFIG_DDR_ECC
 115 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 116 #define CONFIG_MEM_INIT_VALUE   0xDeadBeef
 117
 118 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 119 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 120
 121 #define CONFIG_NUM_DDR_CONTROLLERS      2
 122 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 123 #define CONFIG_CHIP_SELECTS_PER_CTRL    2
 124
 125 /* I2C addresses of SPD EEPROMs */
 126 #define CONFIG_SYS_SPD_BUS_NUM          1       /* SPD EEPROMS locate on I2C bus 1 */
 127 #define SPD_EEPROM_ADDRESS1     0x51    /* CTLR 0 DIMM 0 */
 128 #define SPD_EEPROM_ADDRESS2     0x52    /* CTLR 1 DIMM 0 */
 129
 130 /* These are used when DDR doesn't use SPD.  */
 131 #define CONFIG_SYS_SDRAM_SIZE           512             /* DDR is 512MB */
 132 #define CONFIG_SYS_DDR_CS0_BNDS         0x0000001F
 133 #define CONFIG_SYS_DDR_CS0_CONFIG       0x80010202      /* Enable, no interleaving */
 134 #define CONFIG_SYS_DDR_TIMING_3         0x00020000
 135 #define CONFIG_SYS_DDR_TIMING_0         0x00260802
 136 #define CONFIG_SYS_DDR_TIMING_1         0x626b2634
 137 #define CONFIG_SYS_DDR_TIMING_2         0x062874cf
 138 #define CONFIG_SYS_DDR_MODE_1           0x00440462
 139 #define CONFIG_SYS_DDR_MODE_2           0x00000000
 140 #define CONFIG_SYS_DDR_INTERVAL         0x0c300100
 141 #define CONFIG_SYS_DDR_DATA_INIT        0xdeadbeef
 142 #define CONFIG_SYS_DDR_CLK_CTRL         0x00800000
 143 #define CONFIG_SYS_DDR_OCD_CTRL         0x00000000
 144 #define CONFIG_SYS_DDR_OCD_STATUS       0x00000000
 145 #define CONFIG_SYS_DDR_CONTROL          0xc3000008      /* Type = DDR2 */
 146 #define CONFIG_SYS_DDR_CONTROL2         0x24400000
 147
 148 #define CONFIG_SYS_DDR_ERR_INT_EN       0x0000000d
 149 #define CONFIG_SYS_DDR_ERR_DIS          0x00000000
 150 #define CONFIG_SYS_DDR_SBE              0x00010000
 151
 152 /*
 153  * Make sure required options are set
 154  */
 155 #ifndef CONFIG_SPD_EEPROM
 156 #error ("CONFIG_SPD_EEPROM is required")
 157 #endif
 158
 159 #undef CONFIG_CLOCKS_IN_MHZ
 160
 161 /*
 162  * Memory map
 163  *
 164  * 0x0000_0000  0x7fff_ffff     DDR                     2G Cacheable
 165  * 0x8000_0000  0xbfff_ffff     PCI Express Mem         1G non-cacheable
 166  * 0xc000_0000  0xdfff_ffff     PCI                     512M non-cacheable
 167  * 0xe100_0000  0xe3ff_ffff     PCI IO range            4M non-cacheable
 168  *
 169  * Localbus cacheable (TBD)
 170  * 0xXXXX_XXXX  0xXXXX_XXXX     SRAM                    YZ M Cacheable
 171  *
 172  * Localbus non-cacheable
 173  * 0xe000_0000  0xe80f_ffff     Promjet/free            128M non-cacheable
 174  * 0xe800_0000  0xefff_ffff     FLASH                   128M non-cacheable
 175  * 0xffa0_0000  0xffaf_ffff     NAND                    1M non-cacheable
 176  * 0xffdf_0000  0xffdf_7fff     PIXIS                   32K non-cacheable TLB0
 177  * 0xffd0_0000  0xffd0_3fff     L1 for stack            16K Cacheable TLB0
 178  * 0xffe0_0000  0xffef_ffff     CCSR                    1M non-cacheable
 179  */
 180
 181 /*
 182  * Local Bus Definitions
 183  */
 184 #define CONFIG_SYS_FLASH_BASE           0xe0000000      /* start of FLASH 128M */
 185 #ifdef CONFIG_PHYS_64BIT
 186 #define CONFIG_SYS_FLASH_BASE_PHYS      0xfe0000000ull
 187 #else
 188 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 189 #endif
 190
 191
 192 #define CONFIG_FLASH_BR_PRELIM \
 193         (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000) | BR_PS_16 | BR_V)
 194 #define CONFIG_FLASH_OR_PRELIM 0xf8000ff7
 195
 196 #define CONFIG_SYS_BR1_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V)
 197 #define CONFIG_SYS_OR1_PRELIM   0xf8000ff7
 198
 199 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 200 #define CONFIG_SYS_FLASH_QUIET_TEST
 201 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
 202
 203 #define CONFIG_SYS_MAX_FLASH_BANKS      2               /* number of banks */
 204 #define CONFIG_SYS_MAX_FLASH_SECT       1024            /* sectors per device */
 205 #undef  CONFIG_SYS_FLASH_CHECKSUM
 206 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000           /* Flash Erase Timeout (ms) */
 207 #define CONFIG_SYS_FLASH_WRITE_TOUT     500             /* Flash Write Timeout (ms) */
 208
 209 #if defined(CONFIG_RAMBOOT_NAND)
 210 #define CONFIG_SYS_RAMBOOT
 211 #define CONFIG_SYS_EXTRA_ENV_RELOC
 212 #else
 213 #undef CONFIG_SYS_RAMBOOT
 214 #endif
 215
 216 #define CONFIG_FLASH_CFI_DRIVER
 217 #define CONFIG_SYS_FLASH_CFI
 218 #define CONFIG_SYS_FLASH_EMPTY_INFO
 219 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7
 220
 221 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
 222
 223 #define CONFIG_HWCONFIG                 /* enable hwconfig */
 224 #define CONFIG_FSL_PIXIS        1       /* use common PIXIS code */
 225 #define PIXIS_BASE      0xffdf0000      /* PIXIS registers */
 226 #ifdef CONFIG_PHYS_64BIT
 227 #define PIXIS_BASE_PHYS 0xfffdf0000ull
 228 #else
 229 #define PIXIS_BASE_PHYS PIXIS_BASE
 230 #endif
 231
 232 #define CONFIG_SYS_BR3_PRELIM   (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V)
 233 #define CONFIG_SYS_OR3_PRELIM           0xffffeff7      /* 32KB but only 4k mapped */
 234
 235 #define PIXIS_ID                0x0     /* Board ID at offset 0 */
 236 #define PIXIS_VER               0x1     /* Board version at offset 1 */
 237 #define PIXIS_PVER              0x2     /* PIXIS FPGA version at offset 2 */
 238 #define PIXIS_CSR               0x3     /* PIXIS General control/status register */
 239 #define PIXIS_RST               0x4     /* PIXIS Reset Control register */
 240 #define PIXIS_PWR               0x5     /* PIXIS Power status register */
 241 #define PIXIS_AUX               0x6     /* Auxiliary 1 register */
 242 #define PIXIS_SPD               0x7     /* Register for SYSCLK speed */
 243 #define PIXIS_AUX2              0x8     /* Auxiliary 2 register */
 244 #define PIXIS_VCTL              0x10    /* VELA Control Register */
 245 #define PIXIS_VSTAT             0x11    /* VELA Status Register */
 246 #define PIXIS_VCFGEN0           0x12    /* VELA Config Enable 0 */
 247 #define PIXIS_VCFGEN1           0x13    /* VELA Config Enable 1 */
 248 #define PIXIS_VCORE0            0x14    /* VELA VCORE0 Register */
 249 #define PIXIS_VBOOT             0x16    /* VELA VBOOT Register */
 250 #define PIXIS_VBOOT_LBMAP       0xc0    /* VBOOT - CFG_LBMAP */
 251 #define PIXIS_VBOOT_LBMAP_NOR0  0x00    /* cfg_lbmap - boot from NOR 0 */
 252 #define PIXIS_VBOOT_LBMAP_PJET  0x01    /* cfg_lbmap - boot from projet */
 253 #define PIXIS_VBOOT_LBMAP_NAND  0x02    /* cfg_lbmap - boot from NAND */
 254 #define PIXIS_VBOOT_LBMAP_NOR1  0x03    /* cfg_lbmap - boot from NOR 1 */
 255 #define PIXIS_VSPEED0           0x17    /* VELA VSpeed 0 */
 256 #define PIXIS_VSPEED1           0x18    /* VELA VSpeed 1 */
 257 #define PIXIS_VSPEED2           0x19    /* VELA VSpeed 2 */
 258 #define PIXIS_VSYSCLK0          0x1C    /* VELA SYSCLK0 Register */
 259 #define PIXIS_VSYSCLK1          0x1D    /* VELA SYSCLK1 Register */
 260 #define PIXIS_VSYSCLK2          0x1E    /* VELA SYSCLK2 Register */
 261 #define PIXIS_VDDRCLK0          0x1F    /* VELA DDRCLK0 Register */
 262 #define PIXIS_VDDRCLK1          0x20    /* VELA DDRCLK1 Register */
 263 #define PIXIS_VDDRCLK2          0x21    /* VELA DDRCLK2 Register */
 264 #define PIXIS_VWATCH            0x24    /* Watchdog Register */
 265 #define PIXIS_LED               0x25    /* LED Register */
 266
 267 #define PIXIS_SPD_SYSCLK_MASK           0x7             /* SYSCLK option */
 268
 269 /* old pixis referenced names */
 270 #define PIXIS_VCLKH             0x19    /* VELA VCLKH register */
 271 #define PIXIS_VCLKL             0x1A    /* VELA VCLKL register */
 272 #define CONFIG_SYS_PIXIS_VBOOT_MASK     0xc0
 273 #define PIXIS_VSPEED2_TSEC1SER  0x8
 274 #define PIXIS_VSPEED2_TSEC2SER  0x4
 275 #define PIXIS_VSPEED2_TSEC3SER  0x2
 276 #define PIXIS_VSPEED2_TSEC4SER  0x1
 277 #define PIXIS_VCFGEN1_TSEC1SER  0x20
 278 #define PIXIS_VCFGEN1_TSEC2SER  0x20
 279 #define PIXIS_VCFGEN1_TSEC3SER  0x20
 280 #define PIXIS_VCFGEN1_TSEC4SER  0x20
 281 #define PIXIS_VSPEED2_MASK      (PIXIS_VSPEED2_TSEC1SER \
 282                                         | PIXIS_VSPEED2_TSEC2SER \
 283                                         | PIXIS_VSPEED2_TSEC3SER \
 284                                         | PIXIS_VSPEED2_TSEC4SER)
 285 #define PIXIS_VCFGEN1_MASK      (PIXIS_VCFGEN1_TSEC1SER \
 286                                         | PIXIS_VCFGEN1_TSEC2SER \
 287                                         | PIXIS_VCFGEN1_TSEC3SER \
 288                                         | PIXIS_VCFGEN1_TSEC4SER)
 289
 290 #define CONFIG_SYS_INIT_RAM_LOCK        1
 291 #define CONFIG_SYS_INIT_RAM_ADDR        0xffd00000      /* Initial L1 address */
 292 #define CONFIG_SYS_INIT_RAM_SIZE        0x00004000      /* Size of used area in RAM */
 293
 294 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 295 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 296
 297 #define CONFIG_SYS_MONITOR_LEN          (256 * 1024) /* Reserve 256 kB for Mon */
 298 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)   /* Reserved for malloc */
 299
 300 #ifndef CONFIG_NAND_SPL
 301 #define CONFIG_SYS_NAND_BASE            0xffa00000
 302 #ifdef CONFIG_PHYS_64BIT
 303 #define CONFIG_SYS_NAND_BASE_PHYS       0xfffa00000ull
 304 #else
 305 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 306 #endif
 307 #else
 308 #define CONFIG_SYS_NAND_BASE            0xfff00000
 309 #ifdef CONFIG_PHYS_64BIT
 310 #define CONFIG_SYS_NAND_BASE_PHYS       0xffff00000ull
 311 #else
 312 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 313 #endif
 314 #endif
 315
 316 #define CONFIG_SYS_NAND_BASE_LIST     { CONFIG_SYS_NAND_BASE,\
 317                                 CONFIG_SYS_NAND_BASE + 0x40000, \
 318                                 CONFIG_SYS_NAND_BASE + 0x80000,\
 319                                 CONFIG_SYS_NAND_BASE + 0xC0000}
 320 #define CONFIG_SYS_MAX_NAND_DEVICE    4
 321 #define CONFIG_MTD_NAND_VERIFY_WRITE
 322 #define CONFIG_CMD_NAND         1
 323 #define CONFIG_NAND_FSL_ELBC    1
 324 #define CONFIG_SYS_NAND_BLOCK_SIZE    (128 * 1024)
 325 #define CONFIG_SYS_NAND_MAX_OOBFREE     5
 326 #define CONFIG_SYS_NAND_MAX_ECCPOS      56
 327
 328 /* NAND boot: 4K NAND loader config */
 329 #define CONFIG_SYS_NAND_SPL_SIZE        0x1000
 330 #define CONFIG_SYS_NAND_U_BOOT_SIZE     ((512 << 10) - 0x2000)
 331 #define CONFIG_SYS_NAND_U_BOOT_DST      (CONFIG_SYS_INIT_L2_ADDR)
 332 #define CONFIG_SYS_NAND_U_BOOT_START \
 333                 (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_NAND_SPL_SIZE)
 334 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (0)
 335 #define CONFIG_SYS_NAND_U_BOOT_RELOC    (CONFIG_SYS_INIT_L2_END - 0x2000)
 336 #define CONFIG_SYS_NAND_U_BOOT_RELOC_SP ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF)
 337
 338
 339 /* NAND flash config */
 340 #define CONFIG_SYS_NAND_BR_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 341                                | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 342                                | BR_PS_8               /* Port Size = 8 bit */ \
 343                                | BR_MS_FCM             /* MSEL = FCM */ \
 344                                | BR_V)                 /* valid */
 345 #define CONFIG_SYS_NAND_OR_PRELIM  (0xFFFC0000        /* length 256K */ \
 346                                | OR_FCM_PGS            /* Large Page*/ \
 347                                | OR_FCM_CSCT \
 348                                | OR_FCM_CST \
 349                                | OR_FCM_CHT \
 350                                | OR_FCM_SCY_1 \
 351                                | OR_FCM_TRLX \
 352                                | OR_FCM_EHTR)
 353
 354 #ifdef CONFIG_RAMBOOT_NAND
 355 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 356 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 357 #define CONFIG_SYS_BR2_PRELIM  CONFIG_FLASH_BR_PRELIM   /* NOR Base Address */
 358 #define CONFIG_SYS_OR2_PRELIM  CONFIG_FLASH_OR_PRELIM   /* NOR Options */
 359 #else
 360 #define CONFIG_SYS_BR0_PRELIM  CONFIG_FLASH_BR_PRELIM   /* NOR Base Address */
 361 #define CONFIG_SYS_OR0_PRELIM  CONFIG_FLASH_OR_PRELIM   /* NOR Options */
 362 #define CONFIG_SYS_BR2_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 363 #define CONFIG_SYS_OR2_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 364 #endif
 365 #define CONFIG_SYS_BR4_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0x40000) \
 366                                | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 367                                | BR_PS_8               /* Port Size = 8 bit */ \
 368                                | BR_MS_FCM             /* MSEL = FCM */ \
 369                                | BR_V)                 /* valid */
 370 #define CONFIG_SYS_OR4_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 371 #define CONFIG_SYS_BR5_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0x80000)\
 372                                | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 373                                | BR_PS_8               /* Port Size = 8 bit */ \
 374                                | BR_MS_FCM             /* MSEL = FCM */ \
 375                                | BR_V)                 /* valid */
 376 #define CONFIG_SYS_OR5_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 377
 378 #define CONFIG_SYS_BR6_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0xc0000)\
 379                                | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 380                                | BR_PS_8               /* Port Size = 8 bit */ \
 381                                | BR_MS_FCM             /* MSEL = FCM */ \
 382                                | BR_V)                 /* valid */
 383 #define CONFIG_SYS_OR6_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 384
 385
 386 /* Serial Port - controlled on board with jumper J8
 387  * open - index 2
 388  * shorted - index 1
 389  */
 390 #define CONFIG_CONS_INDEX       1
 391 #define CONFIG_SYS_NS16550
 392 #define CONFIG_SYS_NS16550_SERIAL
 393 #define CONFIG_SYS_NS16550_REG_SIZE     1
 394 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 395 #ifdef CONFIG_NAND_SPL
 396 #define CONFIG_NS16550_MIN_FUNCTIONS
 397 #endif
 398
 399 #define CONFIG_SYS_BAUDRATE_TABLE       \
 400         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 401
 402 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
 403 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
 404
 405 /* Use the HUSH parser */
 406 #define CONFIG_SYS_HUSH_PARSER
 407
 408 /*
 409  * Pass open firmware flat tree
 410  */
 411 #define CONFIG_OF_LIBFDT                1
 412 #define CONFIG_OF_BOARD_SETUP           1
 413 #define CONFIG_OF_STDOUT_VIA_ALIAS      1
 414
 415 /* new uImage format support */
 416 #define CONFIG_FIT              1
 417 #define CONFIG_FIT_VERBOSE      1 /* enable fit_format_{error,warning}() */
 418
 419 /* I2C */
 420 #define CONFIG_SYS_I2C
 421 #define CONFIG_SYS_I2C_FSL
 422 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 423 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 424 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 425 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 426 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 427 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x3100
 428 #define CONFIG_SYS_I2C_NOPROBES         { {0, 0x29} }
 429 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 430
 431 /*
 432  * I2C2 EEPROM
 433  */
 434 #define CONFIG_ID_EEPROM
 435 #ifdef CONFIG_ID_EEPROM
 436 #define CONFIG_SYS_I2C_EEPROM_NXID
 437 #endif
 438 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 439 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 440 #define CONFIG_SYS_EEPROM_BUS_NUM       1
 441
 442 /*
 443  * General PCI
 444  * Memory space is mapped 1-1, but I/O space must start from 0.
 445  */
 446
 447 /* controller 3, direct to uli, tgtid 3, Base address 8000 */
 448 #define CONFIG_SYS_PCIE3_NAME           "ULI"
 449 #define CONFIG_SYS_PCIE3_MEM_VIRT       0x80000000
 450 #ifdef CONFIG_PHYS_64BIT
 451 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 452 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc00000000ull
 453 #else
 454 #define CONFIG_SYS_PCIE3_MEM_BUS        0x80000000
 455 #define CONFIG_SYS_PCIE3_MEM_PHYS       0x80000000
 456 #endif
 457 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
 458 #define CONFIG_SYS_PCIE3_IO_VIRT        0xffc00000
 459 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000
 460 #ifdef CONFIG_PHYS_64BIT
 461 #define CONFIG_SYS_PCIE3_IO_PHYS        0xfffc00000ull
 462 #else
 463 #define CONFIG_SYS_PCIE3_IO_PHYS        0xffc00000
 464 #endif
 465 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 466
 467 /* controller 2, Slot 2, tgtid 2, Base address 9000 */
 468 #define CONFIG_SYS_PCIE2_NAME           "Slot 1"
 469 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 470 #ifdef CONFIG_PHYS_64BIT
 471 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 472 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 473 #else
 474 #define CONFIG_SYS_PCIE2_MEM_BUS        0xa0000000
 475 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xa0000000
 476 #endif
 477 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 478 #define CONFIG_SYS_PCIE2_IO_VIRT        0xffc10000
 479 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000
 480 #ifdef CONFIG_PHYS_64BIT
 481 #define CONFIG_SYS_PCIE2_IO_PHYS        0xfffc10000ull
 482 #else
 483 #define CONFIG_SYS_PCIE2_IO_PHYS        0xffc10000
 484 #endif
 485 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 486
 487 /* controller 1, Slot 1, tgtid 1, Base address a000 */
 488 #define CONFIG_SYS_PCIE1_NAME           "Slot 2"
 489 #define CONFIG_SYS_PCIE1_MEM_VIRT       0xc0000000
 490 #ifdef CONFIG_PHYS_64BIT
 491 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 492 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc40000000ull
 493 #else
 494 #define CONFIG_SYS_PCIE1_MEM_BUS        0xc0000000
 495 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc0000000
 496 #endif
 497 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 498 #define CONFIG_SYS_PCIE1_IO_VIRT        0xffc20000
 499 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
 500 #ifdef CONFIG_PHYS_64BIT
 501 #define CONFIG_SYS_PCIE1_IO_PHYS        0xfffc20000ull
 502 #else
 503 #define CONFIG_SYS_PCIE1_IO_PHYS        0xffc20000
 504 #endif
 505 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 506
 507 #if defined(CONFIG_PCI)
 508
 509 /*PCIE video card used*/
 510 #define VIDEO_IO_OFFSET         CONFIG_SYS_PCIE1_IO_VIRT
 511
 512 /* video */
 513 #define CONFIG_VIDEO
 514
 515 #if defined(CONFIG_VIDEO)
 516 #define CONFIG_BIOSEMU
 517 #define CONFIG_CFB_CONSOLE
 518 #define CONFIG_VIDEO_SW_CURSOR
 519 #define CONFIG_VGA_AS_SINGLE_DEVICE
 520 #define CONFIG_ATI_RADEON_FB
 521 #define CONFIG_VIDEO_LOGO
 522 /*#define CONFIG_CONSOLE_CURSOR*/
 523 #define CONFIG_SYS_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET
 524 #endif
 525
 526 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 527
 528 #undef CONFIG_EEPRO100
 529 #undef CONFIG_TULIP
 530 #undef CONFIG_RTL8139
 531 #define CONFIG_E1000                    /* Define e1000 pci Ethernet card */
 532
 533 #ifndef CONFIG_PCI_PNP
 534         #define PCI_ENET0_IOADDR        CONFIG_SYS_PCIE3_IO_BUS
 535         #define PCI_ENET0_MEMADDR       CONFIG_SYS_PCIE3_IO_BUS
 536         #define PCI_IDSEL_NUMBER        0x11    /* IDSEL = AD11 */
 537 #endif
 538
 539 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 540 #define CONFIG_DOS_PARTITION
 541 #define CONFIG_SCSI_AHCI
 542
 543 #ifdef CONFIG_SCSI_AHCI
 544 #define CONFIG_LIBATA
 545 #define CONFIG_SATA_ULI5288
 546 #define CONFIG_SYS_SCSI_MAX_SCSI_ID     4
 547 #define CONFIG_SYS_SCSI_MAX_LUN 1
 548 #define CONFIG_SYS_SCSI_MAX_DEVICE      (CONFIG_SYS_SCSI_MAX_SCSI_ID * CONFIG_SYS_SCSI_MAX_LUN)
 549 #define CONFIG_SYS_SCSI_MAXDEVICE       CONFIG_SYS_SCSI_MAX_DEVICE
 550 #endif /* SCSI */
 551
 552 #endif  /* CONFIG_PCI */
 553
 554
 555 #if defined(CONFIG_TSEC_ENET)
 556
 557 #define CONFIG_MII              1       /* MII PHY management */
 558 #define CONFIG_MII_DEFAULT_TSEC 1       /* Allow unregistered phys */
 559 #define CONFIG_TSEC1    1
 560 #define CONFIG_TSEC1_NAME       "eTSEC1"
 561 #define CONFIG_TSEC2    1
 562 #define CONFIG_TSEC2_NAME       "eTSEC2"
 563 #define CONFIG_TSEC3    1
 564 #define CONFIG_TSEC3_NAME       "eTSEC3"
 565 #define CONFIG_TSEC4    1
 566 #define CONFIG_TSEC4_NAME       "eTSEC4"
 567
 568 #define CONFIG_PIXIS_SGMII_CMD
 569 #define CONFIG_FSL_SGMII_RISER  1
 570 #define SGMII_RISER_PHY_OFFSET  0x1c
 571
 572 #ifdef CONFIG_FSL_SGMII_RISER
 573 #define CONFIG_SYS_TBIPA_VALUE          0x10 /* avoid conflict with eTSEC4 paddr */
 574 #endif
 575
 576 #define TSEC1_PHY_ADDR          0
 577 #define TSEC2_PHY_ADDR          1
 578 #define TSEC3_PHY_ADDR          2
 579 #define TSEC4_PHY_ADDR          3
 580
 581 #define TSEC1_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 582 #define TSEC2_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 583 #define TSEC3_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 584 #define TSEC4_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 585
 586 #define TSEC1_PHYIDX            0
 587 #define TSEC2_PHYIDX            0
 588 #define TSEC3_PHYIDX            0
 589 #define TSEC4_PHYIDX            0
 590
 591 #define CONFIG_ETHPRIME         "eTSEC1"
 592
 593 #define CONFIG_PHY_GIGE         1       /* Include GbE speed/duplex detection */
 594 #endif  /* CONFIG_TSEC_ENET */
 595
 596 /*
 597  * Environment
 598  */
 599
 600 #if defined(CONFIG_SYS_RAMBOOT)
 601 #if defined(CONFIG_RAMBOOT_NAND)
 602 #define CONFIG_ENV_IS_IN_NAND   1
 603 #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
 604 #define CONFIG_ENV_OFFSET       ((512 * 1024)\
 605                                 + CONFIG_SYS_NAND_BLOCK_SIZE)
 606 #endif
 607
 608 #else
 609         #define CONFIG_ENV_IS_IN_FLASH  1
 610         #if CONFIG_SYS_MONITOR_BASE > 0xfff80000
 611         #define CONFIG_ENV_ADDR 0xfff80000
 612         #else
 613         #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 614         #endif
 615         #define CONFIG_ENV_SIZE 0x2000
 616         #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 617 #endif
 618
 619 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download */
 620 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change */
 621
 622 /*
 623  * Command line configuration.
 624  */
 625 #include <config_cmd_default.h>
 626
 627 #define CONFIG_CMD_ERRATA
 628 #define CONFIG_CMD_IRQ
 629 #define CONFIG_CMD_PING
 630 #define CONFIG_CMD_I2C
 631 #define CONFIG_CMD_MII
 632 #define CONFIG_CMD_ELF
 633 #define CONFIG_CMD_SETEXPR
 634 #define CONFIG_CMD_REGINFO
 635
 636 #if defined(CONFIG_PCI)
 637 #define CONFIG_CMD_PCI
 638 #define CONFIG_CMD_NET
 639 #define CONFIG_CMD_SCSI
 640 #define CONFIG_CMD_EXT2
 641 #endif
 642
 643 /*
 644  * USB
 645  */
 646 #define CONFIG_USB_EHCI
 647
 648 #ifdef CONFIG_USB_EHCI
 649 #define CONFIG_CMD_USB
 650 #define CONFIG_USB_EHCI_PCI
 651 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 652 #define CONFIG_USB_STORAGE
 653 #define CONFIG_PCI_EHCI_DEVICE                  0
 654 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS      2
 655 #endif
 656
 657 #undef CONFIG_WATCHDOG                  /* watchdog disabled */
 658
 659 /*
 660  * Miscellaneous configurable options
 661  */
 662 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 663 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 664 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 665 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 666 #if defined(CONFIG_CMD_KGDB)
 667 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 668 #else
 669 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 670 #endif
 671 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 672 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 673 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
 674
 675 /*
 676  * For booting Linux, the board info and command line data
 677  * have to be in the first 64 MB of memory, since this is
 678  * the maximum mapped by the Linux kernel during initialization.
 679  */
 680 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial Memory map for Linux*/
 681 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 682
 683 #if defined(CONFIG_CMD_KGDB)
 684 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 685 #endif
 686
 687 /*
 688  * Environment Configuration
 689  */
 690
 691 /* The mac addresses for all ethernet interface */
 692 #if defined(CONFIG_TSEC_ENET)
 693 #define CONFIG_HAS_ETH0
 694 #define CONFIG_ETHADDR  00:E0:0C:02:00:FD
 695 #define CONFIG_HAS_ETH1
 696 #define CONFIG_ETH1ADDR 00:E0:0C:02:01:FD
 697 #define CONFIG_HAS_ETH2
 698 #define CONFIG_ETH2ADDR 00:E0:0C:02:02:FD
 699 #define CONFIG_HAS_ETH3
 700 #define CONFIG_ETH3ADDR 00:E0:0C:02:03:FD
 701 #endif
 702
 703 #define CONFIG_IPADDR           192.168.1.254
 704
 705 #define CONFIG_HOSTNAME         unknown
 706 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 707 #define CONFIG_BOOTFILE         "uImage"
 708 #define CONFIG_UBOOTPATH        u-boot.bin      /* U-Boot image on TFTP server */
 709
 710 #define CONFIG_SERVERIP         192.168.1.1
 711 #define CONFIG_GATEWAYIP        192.168.1.1
 712 #define CONFIG_NETMASK          255.255.255.0
 713
 714 /* default location for tftp and bootm */
 715 #define CONFIG_LOADADDR         1000000
 716
 717 #define CONFIG_BOOTDELAY 10     /* -1 disables auto-boot */
 718 #undef  CONFIG_BOOTARGS         /* the boot command will set bootargs */
 719
 720 #define CONFIG_BAUDRATE 115200
 721
 722 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 723 "hwconfig=fsl_ddr:ctlr_intlv=bank,bank_intlv=cs0_cs1,ecc=off\0"         \
 724 "netdev=eth0\0"                                         \
 725 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"                             \
 726 "tftpflash=tftpboot $loadaddr $uboot; "                 \
 727         "protect off " __stringify(CONFIG_SYS_TEXT_BASE)        \
 728                 " +$filesize; " \
 729         "erase " __stringify(CONFIG_SYS_TEXT_BASE)              \
 730                 " +$filesize; " \
 731         "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE)     \
 732                 " $filesize; "  \
 733         "protect on " __stringify(CONFIG_SYS_TEXT_BASE)         \
 734                 " +$filesize; " \
 735         "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE)    \
 736                 " $filesize\0"  \
 737 "consoledev=ttyS0\0"                            \
 738 "ramdiskaddr=2000000\0"                 \
 739 "ramdiskfile=8572ds/ramdisk.uboot\0"            \
 740 "fdtaddr=c00000\0"                              \
 741 "fdtfile=8572ds/mpc8572ds.dtb\0"                \
 742 "bdev=sda3\0"
 743
 744 #define CONFIG_HDBOOT                           \
 745  "setenv bootargs root=/dev/$bdev rw "          \
 746  "console=$consoledev,$baudrate $othbootargs;"  \
 747  "tftp $loadaddr $bootfile;"                    \
 748  "tftp $fdtaddr $fdtfile;"                      \
 749  "bootm $loadaddr - $fdtaddr"
 750
 751 #define CONFIG_NFSBOOTCOMMAND           \
 752  "setenv bootargs root=/dev/nfs rw "    \
 753  "nfsroot=$serverip:$rootpath "         \
 754  "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 755  "console=$consoledev,$baudrate $othbootargs;"  \
 756  "tftp $loadaddr $bootfile;"            \
 757  "tftp $fdtaddr $fdtfile;"              \
 758  "bootm $loadaddr - $fdtaddr"
 759
 760 #define CONFIG_RAMBOOTCOMMAND           \
 761  "setenv bootargs root=/dev/ram rw "    \
 762  "console=$consoledev,$baudrate $othbootargs;"  \
 763  "tftp $ramdiskaddr $ramdiskfile;"      \
 764  "tftp $loadaddr $bootfile;"            \
 765  "tftp $fdtaddr $fdtfile;"              \
 766  "bootm $loadaddr $ramdiskaddr $fdtaddr"
 767
 768 #define CONFIG_BOOTCOMMAND              CONFIG_HDBOOT
 769
 770 #endif  /* __CONFIG_H */