include/configs/OCRTC.h

   1 /*
   2  * (C) Copyright 2001
   3  * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
   4  *
   5  * See file CREDITS for list of people who contributed to this
   6  * project.
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of
  11  * the License, or (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21  * MA 02111-1307 USA
  22  */
  23
  24 /*
  25  * board/config.h - configuration options, board specific
  26  */
  27
  28 #ifndef __CONFIG_H
  29 #define __CONFIG_H
  30
  31 /*
  32  * High Level Configuration Options
  33  * (easy to change)
  34  */
  35
  36 #define CONFIG_405GP            1       /* This is a PPC405 CPU         */
  37 #define CONFIG_4xx              1       /* ...member of PPC4xx family   */
  38 #define CONFIG_OCRTC            1       /* ...on a OCRTC board          */
  39
  40 #define CONFIG_BOARD_EARLY_INIT_F 1     /* call board_early_init_f()    */
  41
  42 #define CONFIG_SYS_CLK_FREQ     33000000 /* external frequency to pll   */
  43
  44 #define CONFIG_BAUDRATE         9600
  45 #define CONFIG_BOOTDELAY        3       /* autoboot after 3 seconds     */
  46
  47 #undef  CONFIG_BOOTARGS
  48 #define CONFIG_BOOTCOMMAND "go fff00100"
  49
  50 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download  */
  51 #define CFG_LOADS_BAUD_CHANGE   1       /* allow baudrate change        */
  52
  53 #define CONFIG_MII              1       /* MII PHY management           */
  54 #define CONFIG_PHY_ADDR         0       /* PHY address                  */
  55 #define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
  56
  57
  58 /*
  59  * BOOTP options
  60  */
  61 #define CONFIG_BOOTP_BOOTFILESIZE
  62 #define CONFIG_BOOTP_BOOTPATH
  63 #define CONFIG_BOOTP_GATEWAY
  64 #define CONFIG_BOOTP_HOSTNAME
  65
  66
  67 /*
  68  * Command line configuration.
  69  */
  70 #include <config_cmd_default.h>
  71
  72 #define CONFIG_CMD_PCI
  73 #define CONFIG_CMD_IRQ
  74 #define CONFIG_CMD_ASKENV
  75 #define CONFIG_CMD_ELF
  76 #define CONFIG_CMD_BSP
  77 #define CONFIG_CMD_EEPROM
  78
  79
  80 #define CONFIG_MAC_PARTITION
  81 #define CONFIG_DOS_PARTITION
  82
  83 #undef  CONFIG_WATCHDOG                 /* watchdog disabled            */
  84
  85 #define CONFIG_SDRAM_BANK0      1       /* init onboard SDRAM bank 0    */
  86
  87 /*
  88  * Miscellaneous configurable options
  89  */
  90 #define CFG_LONGHELP                    /* undef to save memory         */
  91 #define CFG_PROMPT      "=> "           /* Monitor Command Prompt       */
  92 #if defined(CONFIG_CMD_KGDB)
  93 #define CFG_CBSIZE      1024            /* Console I/O Buffer Size      */
  94 #else
  95 #define CFG_CBSIZE      256             /* Console I/O Buffer Size      */
  96 #endif
  97 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
  98 #define CFG_MAXARGS     16              /* max number of command args   */
  99 #define CFG_BARGSIZE    CFG_CBSIZE      /* Boot Argument Buffer Size    */
 100
 101 #define CFG_CONSOLE_INFO_QUIET  1       /* don't print console @ startup*/
 102
 103 #define CFG_MEMTEST_START       0x0400000       /* memtest works on     */
 104 #define CFG_MEMTEST_END         0x0C00000       /* 4 ... 12 MB in DRAM  */
 105
 106 #undef  CFG_EXT_SERIAL_CLOCK           /* no external serial clock used */
 107 #define CFG_IGNORE_405_UART_ERRATA_59   /* ignore ppc405gp errata #59   */
 108 #define CFG_BASE_BAUD       691200
 109
 110 /* The following table includes the supported baudrates */
 111 #define CFG_BAUDRATE_TABLE      \
 112         { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
 113          57600, 115200, 230400, 460800, 921600 }
 114
 115 #define CFG_LOAD_ADDR   0x100000        /* default load address */
 116 #define CFG_EXTBDINFO   1               /* To use extended board_into (bd_t) */
 117
 118 #define CFG_HZ          1000            /* decrementer freq: 1 ms ticks */
 119
 120 #define CONFIG_ZERO_BOOTDELAY_CHECK     /* check for keypress on bootdelay==0 */
 121
 122 /*-----------------------------------------------------------------------
 123  * PCI stuff
 124  *-----------------------------------------------------------------------
 125  */
 126 #define PCI_HOST_ADAPTER 0              /* configure as pci adapter     */
 127 #define PCI_HOST_FORCE  1               /* configure as pci host        */
 128 #define PCI_HOST_AUTO   2               /* detected via arbiter enable  */
 129
 130 #define CONFIG_PCI                      /* include pci support          */
 131 #define CONFIG_PCI_HOST PCI_HOST_AUTO   /* select pci host function     */
 132 #define CONFIG_PCI_PNP                  /* do pci plug-and-play         */
 133                                         /* resource configuration       */
 134
 135 #define CONFIG_PCI_SCAN_SHOW            /* print pci devices @ startup  */
 136
 137 #define CONFIG_PCI_BOOTDELAY    1       /* enable pci bootdelay variable*/
 138
 139 #define CFG_PCI_SUBSYS_VENDORID 0x12FE  /* PCI Vendor ID: esd gmbh      */
 140 #define CFG_PCI_SUBSYS_DEVICEID 0x0410  /* PCI Device ID: OCRTC         */
 141 #define CFG_PCI_CLASSCODE       0x0b20  /* PCI Class Code: Processor/PPC*/
 142 #define CFG_PCI_PTM1LA  0x00000000      /* point to sdram               */
 143 #define CFG_PCI_PTM1MS  0xfc000001      /* 64MB, enable hard-wired to 1 */
 144 #define CFG_PCI_PTM1PCI 0x00000000      /* Host: use this pci address   */
 145 #define CFG_PCI_PTM2LA  0xffc00000      /* point to flash               */
 146 #define CFG_PCI_PTM2MS  0xffc00001      /* 4MB, enable                  */
 147 #define CFG_PCI_PTM2PCI 0x04000000      /* Host: use this pci address   */
 148
 149 /*-----------------------------------------------------------------------
 150  * Start addresses for the final memory configuration
 151  * (Set up by the startup code)
 152  * Please note that CFG_SDRAM_BASE _must_ start at 0
 153  */
 154 #define CFG_SDRAM_BASE          0x00000000
 155 #define CFG_FLASH_BASE          0xFFFD0000
 156 #define CFG_MONITOR_BASE        CFG_FLASH_BASE
 157 #define CFG_MONITOR_LEN         (192 * 1024)    /* Reserve 192 kB for Monitor   */
 158 #define CFG_MALLOC_LEN          (128 * 1024)    /* Reserve 128 kB for malloc()  */
 159
 160 /*
 161  * For booting Linux, the board info and command line data
 162  * have to be in the first 8 MB of memory, since this is
 163  * the maximum mapped by the Linux kernel during initialization.
 164  */
 165 #define CFG_BOOTMAPSZ           (8 << 20)       /* Initial Memory map for Linux */
 166 /*-----------------------------------------------------------------------
 167  * FLASH organization
 168  */
 169 #define CFG_MAX_FLASH_BANKS     2       /* max number of memory banks           */
 170 #define CFG_MAX_FLASH_SECT      256     /* max number of sectors on one chip    */
 171
 172 #define CFG_FLASH_ERASE_TOUT    120000  /* Timeout for Flash Erase (in ms)      */
 173 #define CFG_FLASH_WRITE_TOUT    500     /* Timeout for Flash Write (in ms)      */
 174
 175 #define CFG_FLASH_WORD_SIZE     unsigned short  /* flash word size (width)      */
 176 #define CFG_FLASH_ADDR0         0x5555  /* 1st address for flash config cycles  */
 177 #define CFG_FLASH_ADDR1         0x2AAA  /* 2nd address for flash config cycles  */
 178 /*
 179  * The following defines are added for buggy IOP480 byte interface.
 180  * All other boards should use the standard values (CPCI405 etc.)
 181  */
 182 #define CFG_FLASH_READ0         0x0000  /* 0 is standard                        */
 183 #define CFG_FLASH_READ1         0x0001  /* 1 is standard                        */
 184 #define CFG_FLASH_READ2         0x0002  /* 2 is standard                        */
 185
 186 #define CFG_FLASH_EMPTY_INFO            /* print 'E' for empty sector on flinfo */
 187
 188 #if 0 /* Use NVRAM for environment variables */
 189 /*-----------------------------------------------------------------------
 190  * NVRAM organization
 191  */
 192 #define CONFIG_ENV_IS_IN_NVRAM  1       /* use NVRAM for environment vars       */
 193 #define CFG_NVRAM_BASE_ADDR     0xf0200000              /* NVRAM base address   */
 194 #define CFG_NVRAM_SIZE          (32*1024)               /* NVRAM size           */
 195 #define CONFIG_ENV_SIZE         0x1000          /* Size of Environment vars     */
 196 #define CONFIG_ENV_ADDR         \
 197         (CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CONFIG_ENV_SIZE)    /* Env  */
 198 #define CFG_NVRAM_VXWORKS_OFFS  0x6900          /* Offset for VxWorks eth-addr  */
 199
 200 #else /* Use EEPROM for environment variables */
 201
 202 #define CONFIG_ENV_IS_IN_EEPROM 1       /* use EEPROM for environment vars */
 203 #define CONFIG_ENV_OFFSET               0x000   /* environment starts at the beginning of the EEPROM */
 204 #define CONFIG_ENV_SIZE         0x300   /* 768 bytes may be used for env vars */
 205                                    /* total size of a CAT24WC08 is 1024 bytes */
 206 #endif
 207
 208 /*-----------------------------------------------------------------------
 209  * I2C EEPROM (CAT24WC08) for environment
 210  */
 211 #define CONFIG_HARD_I2C                 /* I2c with hardware support */
 212 #define CFG_I2C_SPEED           400000  /* I2C speed and slave address */
 213 #define CFG_I2C_SLAVE           0x7F
 214
 215 #define CFG_I2C_EEPROM_ADDR     0x50    /* EEPROM CAT28WC08             */
 216 #define CFG_I2C_EEPROM_ADDR_LEN 1       /* Bytes of address             */
 217 /* mask of address bits that overflow into the "EEPROM chip address"    */
 218 #define CFG_I2C_EEPROM_ADDR_OVERFLOW    0x07
 219 #define CFG_EEPROM_PAGE_WRITE_BITS 4    /* The Catalyst CAT24WC08 has   */
 220                                         /* 16 byte page write mode using*/
 221                                         /* last 4 bits of the address   */
 222 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS  10   /* and takes up to 10 msec */
 223 #define CFG_EEPROM_PAGE_WRITE_ENABLE
 224
 225 /*
 226  * Init Memory Controller:
 227  *
 228  * BR0/1 and OR0/1 (FLASH)
 229  */
 230
 231 #define FLASH_BASE0_PRELIM      0xFF800000      /* FLASH bank #0        */
 232 #define FLASH_BASE1_PRELIM      0xFFC00000      /* FLASH bank #1        */
 233
 234 /*-----------------------------------------------------------------------
 235  * External Bus Controller (EBC) Setup
 236  */
 237
 238 /* Memory Bank 0 (Flash Bank 0) initialization                                  */
 239 #define CFG_EBC_PB0AP           0x92015480
 240 #define CFG_EBC_PB0CR           0xFFC5A000  /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
 241
 242 /* Memory Bank 1 (Flash Bank 1) initialization                                  */
 243 #define CFG_EBC_PB1AP           0x92015480
 244 #define CFG_EBC_PB1CR           0xFF85A000  /* BAS=0xFF8,BS=4MB,BU=R/W,BW=16bit */
 245
 246 /* Memory Bank 2 (PLD - FPGA-boot) initialization                               */
 247 #define CFG_EBC_PB2AP           0x02015480  /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
 248                                             /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x0,SOR=0x1,BEM=0x0,PEN=0x0*/
 249 #define CFG_EBC_PB2CR           0xF0018000  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit  */
 250
 251 /* Memory Bank 3 (PLD - OSL) initialization                                     */
 252 #define CFG_EBC_PB3AP           0x02015480  /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
 253                                             /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x0,SOR=0x1,BEM=0x0,PEN=0x0*/
 254 #define CFG_EBC_PB3CR           0xF0118000  /* BAS=0xF01,BS=1MB,BU=R/W,BW=8bit  */
 255
 256 /* Memory Bank 4 (Spartan2 1) initialization                                    */
 257 #define CFG_EBC_PB4AP           0x02015580  /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
 258                                             /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x1,SOR=0x1,BEM=0x0,PEN=0x0*/
 259 #define CFG_EBC_PB4CR           0xF209C000  /* BAS=0xF20,BS=16MB,BU=R/W,BW=32bit*/
 260
 261 /* Memory Bank 5 (Spartan2 2) initialization                                    */
 262 #define CFG_EBC_PB5AP           0x02015580  /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
 263                                             /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x1,SOR=0x1,BEM=0x0,PEN=0x0*/
 264 #define CFG_EBC_PB5CR           0xF309C000  /* BAS=0xF30,BS=16MB,BU=R/W,BW=32bit*/
 265
 266 /* Memory Bank 6 (Virtex 1) initialization                                      */
 267 #define CFG_EBC_PB6AP           0x02015580  /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
 268                                             /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x1,SOR=0x1,BEM=0x0,PEN=0x0*/
 269 #define CFG_EBC_PB6CR           0xF409A000  /* BAS=0xF40,BS=16MB,BU=R/W,BW=16bit*/
 270
 271 /* Memory Bank 7 (Virtex 2) initialization                                      */
 272 #define CFG_EBC_PB7AP           0x02015580  /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
 273                                             /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x1,SOR=0x1,BEM=0x0,PEN=0x0*/
 274 #define CFG_EBC_PB7CR           0xF509A000  /* BAS=0xF50,BS=16MB,BU=R/W,BW=16bit*/
 275
 276
 277 #define CFG_VXWORKS_MAC_PTR     0x00000000      /* Pass Ethernet MAC to VxWorks */
 278
 279 /*-----------------------------------------------------------------------
 280  * Definitions for initial stack pointer and data area (in DPRAM)
 281  */
 282
 283 /* use on chip memory ( OCM ) for temperary stack until sdram is tested */
 284 #define CFG_TEMP_STACK_OCM        1
 285
 286 /* On Chip Memory location */
 287 #define CFG_OCM_DATA_ADDR       0xF8000000
 288 #define CFG_OCM_DATA_SIZE       0x1000
 289
 290 #define CFG_INIT_RAM_ADDR       CFG_OCM_DATA_ADDR /* inside of SDRAM            */
 291 #define CFG_INIT_RAM_END        CFG_OCM_DATA_SIZE /* End of used area in RAM    */
 292 #define CFG_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
 293 #define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 294 #define CFG_INIT_SP_OFFSET      CFG_GBL_DATA_OFFSET
 295
 296
 297 /*
 298  * Internal Definitions
 299  *
 300  * Boot Flags
 301  */
 302 #define BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
 303 #define BOOTFLAG_WARM   0x02            /* Software reboot                      */
 304
 305 #endif  /* __CONFIG_H */