include/configs/P1010RDB.h

   1 /*
   2  * Copyright 2010-2011 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * P010 RDB board configuration file
   9  */
  10
  11 #ifndef __CONFIG_H
  12 #define __CONFIG_H
  13
  14 #ifdef CONFIG_36BIT
  15 #define CONFIG_PHYS_64BIT
  16 #endif
  17 #define CONFIG_SYS_GENERIC_BOARD
  18 #define CONFIG_DISPLAY_BOARDINFO
  19
  20 #define CONFIG_P1010
  21 #define CONFIG_E500                     /* BOOKE e500 family */
  22 #include <asm/config_mpc85xx.h>
  23 #define CONFIG_NAND_FSL_IFC
  24
  25 #ifdef CONFIG_SDCARD
  26 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
  27 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT
  28 #define CONFIG_SPL_ENV_SUPPORT
  29 #define CONFIG_SPL_SERIAL_SUPPORT
  30 #define CONFIG_SPL_MMC_SUPPORT
  31 #define CONFIG_SPL_MMC_MINIMAL
  32 #define CONFIG_SPL_FLUSH_IMAGE
  33 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  34 #define CONFIG_SPL_LIBGENERIC_SUPPORT
  35 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  36 #define CONFIG_SPL_I2C_SUPPORT
  37 #define CONFIG_FSL_LAW                 /* Use common FSL init code */
  38 #define CONFIG_SYS_TEXT_BASE            0x11001000
  39 #define CONFIG_SPL_TEXT_BASE            0xD0001000
  40 #define CONFIG_SPL_PAD_TO               0x18000
  41 #define CONFIG_SPL_MAX_SIZE             (96 * 1024)
  42 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (512 << 10)
  43 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x11000000)
  44 #define CONFIG_SYS_MMC_U_BOOT_START     (0x11000000)
  45 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (96 << 10)
  46 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  47 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  48 #define CONFIG_SPL_MMC_BOOT
  49 #ifdef CONFIG_SPL_BUILD
  50 #define CONFIG_SPL_COMMON_INIT_DDR
  51 #endif
  52 #endif
  53
  54 #ifdef CONFIG_SPIFLASH
  55 #ifdef CONFIG_SECURE_BOOT
  56 #define CONFIG_RAMBOOT_SPIFLASH
  57 #define CONFIG_SYS_TEXT_BASE            0x11000000
  58 #define CONFIG_RESET_VECTOR_ADDRESS     0x110bfffc
  59 #else
  60 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
  61 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT
  62 #define CONFIG_SPL_ENV_SUPPORT
  63 #define CONFIG_SPL_SERIAL_SUPPORT
  64 #define CONFIG_SPL_SPI_SUPPORT
  65 #define CONFIG_SPL_SPI_FLASH_SUPPORT
  66 #define CONFIG_SPL_SPI_FLASH_MINIMAL
  67 #define CONFIG_SPL_FLUSH_IMAGE
  68 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  69 #define CONFIG_SPL_LIBGENERIC_SUPPORT
  70 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  71 #define CONFIG_SPL_I2C_SUPPORT
  72 #define CONFIG_FSL_LAW         /* Use common FSL init code */
  73 #define CONFIG_SYS_TEXT_BASE                    0x11001000
  74 #define CONFIG_SPL_TEXT_BASE                    0xD0001000
  75 #define CONFIG_SPL_PAD_TO                       0x18000
  76 #define CONFIG_SPL_MAX_SIZE                     (96 * 1024)
  77 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (512 << 10)
  78 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x11000000)
  79 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x11000000)
  80 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (96 << 10)
  81 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  82 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  83 #define CONFIG_SPL_SPI_BOOT
  84 #ifdef CONFIG_SPL_BUILD
  85 #define CONFIG_SPL_COMMON_INIT_DDR
  86 #endif
  87 #endif
  88 #endif
  89
  90 #ifdef CONFIG_NAND
  91 #ifdef CONFIG_SECURE_BOOT
  92 #define CONFIG_SPL_INIT_MINIMAL
  93 #define CONFIG_SPL_SERIAL_SUPPORT
  94 #define CONFIG_SPL_NAND_SUPPORT
  95 #define CONFIG_SPL_NAND_BOOT
  96 #define CONFIG_SPL_FLUSH_IMAGE
  97 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  98
  99 #define CONFIG_SYS_TEXT_BASE            0x00201000
 100 #define CONFIG_SPL_TEXT_BASE            0xFFFFE000
 101 #define CONFIG_SPL_MAX_SIZE             8192
 102 #define CONFIG_SPL_RELOC_TEXT_BASE      0x00100000
 103 #define CONFIG_SPL_RELOC_STACK          0x00100000
 104 #define CONFIG_SYS_NAND_U_BOOT_SIZE     ((768 << 10) - 0x2000)
 105 #define CONFIG_SYS_NAND_U_BOOT_DST      (0x00200000 - CONFIG_SPL_MAX_SIZE)
 106 #define CONFIG_SYS_NAND_U_BOOT_START    0x00200000
 107 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0
 108 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
 109 #else
 110 #ifdef CONFIG_TPL_BUILD
 111 #define CONFIG_SPL_NAND_BOOT
 112 #define CONFIG_SPL_FLUSH_IMAGE
 113 #define CONFIG_SPL_ENV_SUPPORT
 114 #define CONFIG_SPL_NAND_INIT
 115 #define CONFIG_SPL_SERIAL_SUPPORT
 116 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 117 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 118 #define CONFIG_SPL_I2C_SUPPORT
 119 #define CONFIG_SPL_NAND_SUPPORT
 120 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT
 121 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 122 #define CONFIG_SPL_COMMON_INIT_DDR
 123 #define CONFIG_SPL_MAX_SIZE             (128 << 10)
 124 #define CONFIG_SPL_TEXT_BASE            0xD0001000
 125 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 126 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (576 << 10)
 127 #define CONFIG_SYS_NAND_U_BOOT_DST      (0x11000000)
 128 #define CONFIG_SYS_NAND_U_BOOT_START    (0x11000000)
 129 #define CONFIG_SYS_NAND_U_BOOT_OFFS     ((128 + 128) << 10)
 130 #elif defined(CONFIG_SPL_BUILD)
 131 #define CONFIG_SPL_INIT_MINIMAL
 132 #define CONFIG_SPL_SERIAL_SUPPORT
 133 #define CONFIG_SPL_NAND_SUPPORT
 134 #define CONFIG_SPL_NAND_MINIMAL
 135 #define CONFIG_SPL_FLUSH_IMAGE
 136 #define CONFIG_SPL_TEXT_BASE            0xff800000
 137 #define CONFIG_SPL_MAX_SIZE             8192
 138 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (128 << 10)
 139 #define CONFIG_SYS_NAND_U_BOOT_DST      0xD0000000
 140 #define CONFIG_SYS_NAND_U_BOOT_START    0xD0000000
 141 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (128 << 10)
 142 #endif
 143 #define CONFIG_SPL_PAD_TO       0x20000
 144 #define CONFIG_TPL_PAD_TO       0x20000
 145 #define CONFIG_SPL_TARGET       "u-boot-with-spl.bin"
 146 #define CONFIG_SYS_TEXT_BASE    0x11001000
 147 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
 148 #endif
 149 #endif
 150
 151 #ifdef CONFIG_NAND_SECBOOT      /* NAND Boot */
 152 #define CONFIG_RAMBOOT_NAND
 153 #define CONFIG_SYS_TEXT_BASE            0x11000000
 154 #define CONFIG_RESET_VECTOR_ADDRESS     0x110bfffc
 155 #endif
 156
 157 #ifndef CONFIG_SYS_TEXT_BASE
 158 #define CONFIG_SYS_TEXT_BASE            0xeff40000
 159 #endif
 160
 161 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 162 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
 163 #endif
 164
 165 #ifdef CONFIG_SPL_BUILD
 166 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 167 #else
 168 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 169 #endif
 170
 171 /* High Level Configuration Options */
 172 #define CONFIG_BOOKE                    /* BOOKE */
 173 #define CONFIG_E500                     /* BOOKE e500 family */
 174 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
 175 #define CONFIG_FSL_CAAM                 /* Enable SEC/CAAM */
 176 #define CONFIG_SYS_HAS_SERDES           /* common SERDES init code */
 177
 178 #define CONFIG_PCI                      /* Enable PCI/PCIE */
 179 #if defined(CONFIG_PCI)
 180 #define CONFIG_PCIE1                    /* PCIE controler 1 (slot 1) */
 181 #define CONFIG_PCIE2                    /* PCIE controler 2 (slot 2) */
 182 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
 183 #define CONFIG_PCI_INDIRECT_BRIDGE      /* indirect PCI bridge support */
 184 #define CONFIG_FSL_PCIE_RESET           /* need PCIe reset errata */
 185 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
 186
 187 #define CONFIG_CMD_PCI
 188
 189 #define CONFIG_E1000                    /*  E1000 pci Ethernet card*/
 190
 191 /*
 192  * PCI Windows
 193  * Memory space is mapped 1-1, but I/O space must start from 0.
 194  */
 195 /* controller 1, Slot 1, tgtid 1, Base address a000 */
 196 #define CONFIG_SYS_PCIE1_NAME           "mini PCIe Slot"
 197 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 198 #ifdef CONFIG_PHYS_64BIT
 199 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 200 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 201 #else
 202 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 203 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 204 #endif
 205 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 206 #define CONFIG_SYS_PCIE1_IO_VIRT        0xffc00000
 207 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 208 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 209 #ifdef CONFIG_PHYS_64BIT
 210 #define CONFIG_SYS_PCIE1_IO_PHYS        0xfffc00000ull
 211 #else
 212 #define CONFIG_SYS_PCIE1_IO_PHYS        0xffc00000
 213 #endif
 214
 215 /* controller 2, Slot 2, tgtid 2, Base address 9000 */
 216 #if defined(CONFIG_P1010RDB_PA)
 217 #define CONFIG_SYS_PCIE2_NAME           "PCIe Slot"
 218 #elif defined(CONFIG_P1010RDB_PB)
 219 #define CONFIG_SYS_PCIE2_NAME           "mini PCIe Slot"
 220 #endif
 221 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 222 #ifdef CONFIG_PHYS_64BIT
 223 #define CONFIG_SYS_PCIE2_MEM_BUS        0xc0000000
 224 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 225 #else
 226 #define CONFIG_SYS_PCIE2_MEM_BUS        0xa0000000
 227 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xa0000000
 228 #endif
 229 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 230 #define CONFIG_SYS_PCIE2_IO_VIRT        0xffc10000
 231 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 232 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 233 #ifdef CONFIG_PHYS_64BIT
 234 #define CONFIG_SYS_PCIE2_IO_PHYS        0xfffc10000ull
 235 #else
 236 #define CONFIG_SYS_PCIE2_IO_PHYS        0xffc10000
 237 #endif
 238
 239 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 240
 241 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 242 #define CONFIG_DOS_PARTITION
 243 #endif
 244
 245 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
 246 #define CONFIG_TSEC_ENET
 247 #define CONFIG_ENV_OVERWRITE
 248
 249 #define CONFIG_DDR_CLK_FREQ     66666666 /* DDRCLK on P1010 RDB */
 250 #define CONFIG_SYS_CLK_FREQ     66666666 /* SYSCLK for P1010 RDB */
 251
 252 #define CONFIG_MISC_INIT_R
 253 #define CONFIG_HWCONFIG
 254 /*
 255  * These can be toggled for performance analysis, otherwise use default.
 256  */
 257 #define CONFIG_L2_CACHE                 /* toggle L2 cache */
 258 #define CONFIG_BTB                      /* toggle branch predition */
 259
 260 #define CONFIG_ADDR_STREAMING           /* toggle addr streaming */
 261
 262 #define CONFIG_ENABLE_36BIT_PHYS
 263
 264 #ifdef CONFIG_PHYS_64BIT
 265 #define CONFIG_ADDR_MAP                 1
 266 #define CONFIG_SYS_NUM_ADDR_MAP         16      /* number of TLB1 entries */
 267 #endif
 268
 269 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 270 #define CONFIG_SYS_MEMTEST_END          0x1fffffff
 271 #define CONFIG_PANIC_HANG               /* do not reset board on panic */
 272
 273 /* DDR Setup */
 274 #define CONFIG_SYS_FSL_DDR3
 275 #define CONFIG_SYS_DDR_RAW_TIMING
 276 #define CONFIG_DDR_SPD
 277 #define CONFIG_SYS_SPD_BUS_NUM          1
 278 #define SPD_EEPROM_ADDRESS              0x52
 279
 280 #define CONFIG_MEM_INIT_VALUE           0xDeadBeef
 281
 282 #ifndef __ASSEMBLY__
 283 extern unsigned long get_sdram_size(void);
 284 #endif
 285 #define CONFIG_SYS_SDRAM_SIZE           get_sdram_size() /* DDR size */
 286 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 287 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 288
 289 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 290 #define CONFIG_CHIP_SELECTS_PER_CTRL    1
 291
 292 /* DDR3 Controller Settings */
 293 #define CONFIG_SYS_DDR_CS0_BNDS         0x0000003f
 294 #define CONFIG_SYS_DDR_CS0_CONFIG       0x80014302
 295 #define CONFIG_SYS_DDR_CS0_CONFIG_2     0x00000000
 296 #define CONFIG_SYS_DDR_DATA_INIT        0xdeadbeef
 297 #define CONFIG_SYS_DDR_INIT_ADDR        0x00000000
 298 #define CONFIG_SYS_DDR_INIT_EXT_ADDR    0x00000000
 299 #define CONFIG_SYS_DDR_MODE_CONTROL     0x00000000
 300 #define CONFIG_SYS_DDR_ZQ_CONTROL       0x89080600
 301 #define CONFIG_SYS_DDR_SR_CNTR          0x00000000
 302 #define CONFIG_SYS_DDR_RCW_1            0x00000000
 303 #define CONFIG_SYS_DDR_RCW_2            0x00000000
 304 #define CONFIG_SYS_DDR_CONTROL          0xc70c0008      /* Type = DDR3  */
 305 #define CONFIG_SYS_DDR_CONTROL_2        0x24401000
 306 #define CONFIG_SYS_DDR_TIMING_4         0x00000001
 307 #define CONFIG_SYS_DDR_TIMING_5         0x03402400
 308
 309 #define CONFIG_SYS_DDR_TIMING_3_800     0x00030000
 310 #define CONFIG_SYS_DDR_TIMING_0_800     0x00110104
 311 #define CONFIG_SYS_DDR_TIMING_1_800     0x6f6b8644
 312 #define CONFIG_SYS_DDR_TIMING_2_800     0x0FA888CF
 313 #define CONFIG_SYS_DDR_CLK_CTRL_800     0x03000000
 314 #define CONFIG_SYS_DDR_MODE_1_800       0x00441420
 315 #define CONFIG_SYS_DDR_MODE_2_800       0x00000000
 316 #define CONFIG_SYS_DDR_INTERVAL_800     0x0C300100
 317 #define CONFIG_SYS_DDR_WRLVL_CONTROL_800 0x8675f608
 318
 319 /* settings for DDR3 at 667MT/s */
 320 #define CONFIG_SYS_DDR_TIMING_3_667             0x00010000
 321 #define CONFIG_SYS_DDR_TIMING_0_667             0x00110004
 322 #define CONFIG_SYS_DDR_TIMING_1_667             0x5d59e544
 323 #define CONFIG_SYS_DDR_TIMING_2_667             0x0FA890CD
 324 #define CONFIG_SYS_DDR_CLK_CTRL_667             0x03000000
 325 #define CONFIG_SYS_DDR_MODE_1_667               0x00441210
 326 #define CONFIG_SYS_DDR_MODE_2_667               0x00000000
 327 #define CONFIG_SYS_DDR_INTERVAL_667             0x0a280000
 328 #define CONFIG_SYS_DDR_WRLVL_CONTROL_667        0x8675F608
 329
 330 #define CONFIG_SYS_CCSRBAR                      0xffe00000
 331 #define CONFIG_SYS_CCSRBAR_PHYS_LOW             CONFIG_SYS_CCSRBAR
 332
 333 /* Don't relocate CCSRBAR while in NAND_SPL */
 334 #ifdef CONFIG_SPL_BUILD
 335 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
 336 #endif
 337
 338 /*
 339  * Memory map
 340  *
 341  * 0x0000_0000  0x3fff_ffff     DDR                     1G cacheable
 342  * 0x8000_0000  0xbfff_ffff     PCI Express Mem         1.5G non-cacheable
 343  * 0xffc0_0000  0xffc3_ffff     PCI IO range            256k non-cacheable
 344  *
 345  * Localbus non-cacheable
 346  * 0xff80_0000  0xff8f_ffff     NAND Flash              1M non-cacheable
 347  * 0xffb0_0000  0xffbf_ffff     Board CPLD              1M non-cacheable
 348  * 0xffd0_0000  0xffd0_3fff     L1 for stack            16K Cacheable TLB0
 349  * 0xffe0_0000  0xffef_ffff     CCSR                    1M non-cacheable
 350  */
 351
 352 /*
 353  * IFC Definitions
 354  */
 355 /* NOR Flash on IFC */
 356 #ifdef CONFIG_SPL_BUILD
 357 #define CONFIG_SYS_NO_FLASH
 358 #endif
 359
 360 #define CONFIG_SYS_FLASH_BASE           0xee000000
 361 #define CONFIG_SYS_MAX_FLASH_SECT       256     /* 32M */
 362
 363 #ifdef CONFIG_PHYS_64BIT
 364 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 365 #else
 366 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 367 #endif
 368
 369 #define CONFIG_SYS_NOR_CSPR     (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 370                                 CSPR_PORT_SIZE_16 | \
 371                                 CSPR_MSEL_NOR | \
 372                                 CSPR_V)
 373 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(32*1024*1024)
 374 #define CONFIG_SYS_NOR_CSOR     CSOR_NOR_ADM_SHIFT(7)
 375 /* NOR Flash Timing Params */
 376 #define CONFIG_SYS_NOR_FTIM0    FTIM0_NOR_TACSE(0x4) | \
 377                                 FTIM0_NOR_TEADC(0x5) | \
 378                                 FTIM0_NOR_TEAHC(0x5)
 379 #define CONFIG_SYS_NOR_FTIM1    FTIM1_NOR_TACO(0x1e) | \
 380                                 FTIM1_NOR_TRAD_NOR(0x0f)
 381 #define CONFIG_SYS_NOR_FTIM2    FTIM2_NOR_TCS(0x4) | \
 382                                 FTIM2_NOR_TCH(0x4) | \
 383                                 FTIM2_NOR_TWP(0x1c)
 384 #define CONFIG_SYS_NOR_FTIM3    0x0
 385
 386 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 387 #define CONFIG_SYS_FLASH_QUIET_TEST
 388 #define CONFIG_FLASH_SHOW_PROGRESS      45      /* count down from 45/5: 9..1 */
 389 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 390
 391 #undef CONFIG_SYS_FLASH_CHECKSUM
 392 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 393 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 394
 395 /* CFI for NOR Flash */
 396 #define CONFIG_FLASH_CFI_DRIVER
 397 #define CONFIG_SYS_FLASH_CFI
 398 #define CONFIG_SYS_FLASH_EMPTY_INFO
 399 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 400
 401 /* NAND Flash on IFC */
 402 #define CONFIG_SYS_NAND_BASE            0xff800000
 403 #ifdef CONFIG_PHYS_64BIT
 404 #define CONFIG_SYS_NAND_BASE_PHYS       0xfff800000ull
 405 #else
 406 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 407 #endif
 408
 409 #define CONFIG_MTD_DEVICE
 410 #define CONFIG_MTD_PARTITION
 411 #define CONFIG_CMD_MTDPARTS
 412 #define MTDIDS_DEFAULT                  "nand0=ff800000.flash"
 413 #define MTDPARTS_DEFAULT                \
 414         "mtdparts=ff800000.flash:2m(uboot-env),1m(dtb),5m(kernel),56m(fs),-(usr)"
 415
 416 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 417                                 | CSPR_PORT_SIZE_8      \
 418                                 | CSPR_MSEL_NAND        \
 419                                 | CSPR_V)
 420 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 421
 422 #if defined(CONFIG_P1010RDB_PA)
 423 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 424                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 425                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 426                                 | CSOR_NAND_RAL_2       /* RAL = 2 Bytes */ \
 427                                 | CSOR_NAND_PGS_512     /* Page Size = 512b */ \
 428                                 | CSOR_NAND_SPRZ_16     /* Spare size = 16 */ \
 429                                 | CSOR_NAND_PB(32))     /* 32 Pages Per Block */
 430 #define CONFIG_SYS_NAND_BLOCK_SIZE      (16 * 1024)
 431
 432 #elif defined(CONFIG_P1010RDB_PB)
 433 #define CONFIG_SYS_NAND_ONFI_DETECTION
 434 #define CONFIG_SYS_NAND_CSOR   (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 435                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 436                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 437                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 438                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 439                                 | CSOR_NAND_SPRZ_224    /* Spare size = 224 */ \
 440                                 | CSOR_NAND_PB(128))  /*Pages Per Block = 128 */
 441 #define CONFIG_SYS_NAND_BLOCK_SIZE     (512 * 1024)
 442 #endif
 443
 444 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 445 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 446 #define CONFIG_CMD_NAND
 447
 448 #if defined(CONFIG_P1010RDB_PA)
 449 /* NAND Flash Timing Params */
 450 #define CONFIG_SYS_NAND_FTIM0           FTIM0_NAND_TCCST(0x01) | \
 451                                         FTIM0_NAND_TWP(0x0C)   | \
 452                                         FTIM0_NAND_TWCHT(0x04) | \
 453                                         FTIM0_NAND_TWH(0x05)
 454 #define CONFIG_SYS_NAND_FTIM1           FTIM1_NAND_TADLE(0x1d) | \
 455                                         FTIM1_NAND_TWBE(0x1d)  | \
 456                                         FTIM1_NAND_TRR(0x07)   | \
 457                                         FTIM1_NAND_TRP(0x0c)
 458 #define CONFIG_SYS_NAND_FTIM2           FTIM2_NAND_TRAD(0x0c) | \
 459                                         FTIM2_NAND_TREH(0x05) | \
 460                                         FTIM2_NAND_TWHRE(0x0f)
 461 #define CONFIG_SYS_NAND_FTIM3           FTIM3_NAND_TWW(0x04)
 462
 463 #elif defined(CONFIG_P1010RDB_PB)
 464 /* support MT29F16G08ABABAWP 4k-pagesize 2G-bytes NAND */
 465 /* ONFI NAND Flash mode0 Timing Params */
 466 #define CONFIG_SYS_NAND_FTIM0  (FTIM0_NAND_TCCST(0x07)| \
 467                                         FTIM0_NAND_TWP(0x18)   | \
 468                                         FTIM0_NAND_TWCHT(0x07) | \
 469                                         FTIM0_NAND_TWH(0x0a))
 470 #define CONFIG_SYS_NAND_FTIM1  (FTIM1_NAND_TADLE(0x32)| \
 471                                         FTIM1_NAND_TWBE(0x39)  | \
 472                                         FTIM1_NAND_TRR(0x0e)   | \
 473                                         FTIM1_NAND_TRP(0x18))
 474 #define CONFIG_SYS_NAND_FTIM2  (FTIM2_NAND_TRAD(0x0f) | \
 475                                         FTIM2_NAND_TREH(0x0a)  | \
 476                                         FTIM2_NAND_TWHRE(0x1e))
 477 #define CONFIG_SYS_NAND_FTIM3   0x0
 478 #endif
 479
 480 #define CONFIG_SYS_NAND_DDR_LAW         11
 481
 482 /* Set up IFC registers for boot location NOR/NAND */
 483 #if defined(CONFIG_NAND) || defined(CONFIG_NAND_SECBOOT)
 484 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 485 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 486 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 487 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 488 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 489 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 490 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 491 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR_CSPR
 492 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 493 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 494 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 495 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 496 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 497 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 498 #else
 499 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR_CSPR
 500 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 501 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 502 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 503 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 504 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 505 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 506 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 507 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 508 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 509 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 510 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 511 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 512 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 513 #endif
 514
 515 /* CPLD on IFC */
 516 #define CONFIG_SYS_CPLD_BASE            0xffb00000
 517
 518 #ifdef CONFIG_PHYS_64BIT
 519 #define CONFIG_SYS_CPLD_BASE_PHYS       0xfffb00000ull
 520 #else
 521 #define CONFIG_SYS_CPLD_BASE_PHYS       CONFIG_SYS_CPLD_BASE
 522 #endif
 523
 524 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
 525                                 | CSPR_PORT_SIZE_8 \
 526                                 | CSPR_MSEL_GPCM \
 527                                 | CSPR_V)
 528 #define CONFIG_SYS_AMASK3               IFC_AMASK(64*1024)
 529 #define CONFIG_SYS_CSOR3                0x0
 530 /* CPLD Timing parameters for IFC CS3 */
 531 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 532                                         FTIM0_GPCM_TEADC(0x0e) | \
 533                                         FTIM0_GPCM_TEAHC(0x0e))
 534 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 535                                         FTIM1_GPCM_TRAD(0x1f))
 536 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 537                                         FTIM2_GPCM_TCH(0x8) | \
 538                                         FTIM2_GPCM_TWP(0x1f))
 539 #define CONFIG_SYS_CS3_FTIM3            0x0
 540
 541 #if defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH) || \
 542         defined(CONFIG_RAMBOOT_NAND)
 543 #define CONFIG_SYS_RAMBOOT
 544 #define CONFIG_SYS_EXTRA_ENV_RELOC
 545 #else
 546 #undef CONFIG_SYS_RAMBOOT
 547 #endif
 548
 549 #ifdef CONFIG_SYS_FSL_ERRATUM_IFC_A003399
 550 #if !defined(CONFIG_SPL) && !defined(CONFIG_SYS_RAMBOOT)
 551 #define CONFIG_A003399_NOR_WORKAROUND
 552 #endif
 553 #endif
 554
 555 #define CONFIG_BOARD_EARLY_INIT_F       /* Call board_pre_init */
 556 #define CONFIG_BOARD_EARLY_INIT_R
 557
 558 #define CONFIG_SYS_INIT_RAM_LOCK
 559 #define CONFIG_SYS_INIT_RAM_ADDR        0xffd00000 /* stack in RAM */
 560 #define CONFIG_SYS_INIT_RAM_END         0x00004000 /* End of used area in RAM */
 561
 562 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_END \
 563                                                 - GENERATED_GBL_DATA_SIZE)
 564 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 565
 566 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 567 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)   /* Reserved for malloc*/
 568
 569 /*
 570  * Config the L2 Cache as L2 SRAM
 571  */
 572 #if defined(CONFIG_SPL_BUILD)
 573 #if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH)
 574 #define CONFIG_SYS_INIT_L2_ADDR         0xD0000000
 575 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 576 #define CONFIG_SYS_L2_SIZE              (256 << 10)
 577 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 578 #define CONFIG_SPL_RELOC_TEXT_BASE      0xD0001000
 579 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024)
 580 #define CONFIG_SPL_RELOC_STACK_SIZE     (16 << 10)
 581 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SYS_INIT_L2_ADDR + 128 * 1024)
 582 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (128 << 10)
 583 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L2_ADDR + 96 * 1024)
 584 #elif defined(CONFIG_NAND)
 585 #ifdef CONFIG_TPL_BUILD
 586 #define CONFIG_SYS_INIT_L2_ADDR         0xD0000000
 587 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 588 #define CONFIG_SYS_L2_SIZE              (256 << 10)
 589 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 590 #define CONFIG_SPL_RELOC_TEXT_BASE      0xD0001000
 591 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024)
 592 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024)
 593 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (48 << 10)
 594 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024)
 595 #else
 596 #define CONFIG_SYS_INIT_L2_ADDR         0xD0000000
 597 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 598 #define CONFIG_SYS_L2_SIZE              (256 << 10)
 599 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 600 #define CONFIG_SPL_RELOC_TEXT_BASE      (CONFIG_SYS_INIT_L2_END - 0x3000)
 601 #define CONFIG_SPL_RELOC_STACK          ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF)
 602 #endif
 603 #endif
 604 #endif
 605
 606 /* Serial Port */
 607 #define CONFIG_CONS_INDEX       1
 608 #undef  CONFIG_SERIAL_SOFTWARE_FIFO
 609 #define CONFIG_SYS_NS16550
 610 #define CONFIG_SYS_NS16550_SERIAL
 611 #define CONFIG_SYS_NS16550_REG_SIZE     1
 612 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 613 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL)
 614 #define CONFIG_NS16550_MIN_FUNCTIONS
 615 #endif
 616
 617 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    /* determine from environment */
 618
 619 #define CONFIG_SYS_BAUDRATE_TABLE       \
 620         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 621
 622 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
 623 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
 624
 625 /* Use the HUSH parser */
 626 #define CONFIG_SYS_HUSH_PARSER
 627
 628 /*
 629  * Pass open firmware flat tree
 630  */
 631 #define CONFIG_OF_LIBFDT
 632 #define CONFIG_OF_BOARD_SETUP
 633 #define CONFIG_OF_STDOUT_VIA_ALIAS
 634
 635 /* new uImage format support */
 636 #define CONFIG_FIT
 637 #define CONFIG_FIT_VERBOSE      /* enable fit_format_{error,warning}() */
 638
 639 /* I2C */
 640 #define CONFIG_SYS_I2C
 641 #define CONFIG_SYS_I2C_FSL
 642 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 643 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 644 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 645 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 646 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 647 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x3100
 648 #define I2C_PCA9557_ADDR1               0x18
 649 #define I2C_PCA9557_ADDR2               0x19
 650 #define I2C_PCA9557_BUS_NUM             0
 651
 652 /* I2C EEPROM */
 653 #if defined(CONFIG_P1010RDB_PB)
 654 #define CONFIG_ID_EEPROM
 655 #ifdef CONFIG_ID_EEPROM
 656 #define CONFIG_SYS_I2C_EEPROM_NXID
 657 #endif
 658 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 659 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 660 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 661 #define MAX_NUM_PORTS                   9 /* for 128Bytes EEPROM */
 662 #endif
 663 /* enable read and write access to EEPROM */
 664 #define CONFIG_CMD_EEPROM
 665 #define CONFIG_SYS_I2C_MULTI_EEPROMS
 666 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 667 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 668 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 669
 670 /* RTC */
 671 #define CONFIG_RTC_PT7C4338
 672 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
 673
 674 #define CONFIG_CMD_I2C
 675
 676 /*
 677  * SPI interface will not be available in case of NAND boot SPI CS0 will be
 678  * used for SLIC
 679  */
 680 #if !defined(CONFIG_NAND) || !defined(CONFIG_NAND_SECBOOT)
 681 /* eSPI - Enhanced SPI */
 682 #define CONFIG_FSL_ESPI
 683 #define CONFIG_SPI_FLASH_SPANSION
 684 #define CONFIG_CMD_SF
 685 #define CONFIG_SF_DEFAULT_SPEED         10000000
 686 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
 687 #endif
 688
 689 #if defined(CONFIG_TSEC_ENET)
 690 #define CONFIG_MII                      /* MII PHY management */
 691 #define CONFIG_MII_DEFAULT_TSEC 1       /* Allow unregistered phys */
 692 #define CONFIG_TSEC1    1
 693 #define CONFIG_TSEC1_NAME       "eTSEC1"
 694 #define CONFIG_TSEC2    1
 695 #define CONFIG_TSEC2_NAME       "eTSEC2"
 696 #define CONFIG_TSEC3    1
 697 #define CONFIG_TSEC3_NAME       "eTSEC3"
 698
 699 #define TSEC1_PHY_ADDR          1
 700 #define TSEC2_PHY_ADDR          0
 701 #define TSEC3_PHY_ADDR          2
 702
 703 #define TSEC1_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 704 #define TSEC2_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 705 #define TSEC3_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 706
 707 #define TSEC1_PHYIDX            0
 708 #define TSEC2_PHYIDX            0
 709 #define TSEC3_PHYIDX            0
 710
 711 #define CONFIG_ETHPRIME         "eTSEC1"
 712
 713 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 714
 715 /* TBI PHY configuration for SGMII mode */
 716 #define CONFIG_TSEC_TBICR_SETTINGS ( \
 717                 TBICR_PHY_RESET \
 718                 | TBICR_ANEG_ENABLE \
 719                 | TBICR_FULL_DUPLEX \
 720                 | TBICR_SPEED1_SET \
 721                 )
 722
 723 #endif  /* CONFIG_TSEC_ENET */
 724
 725
 726 /* SATA */
 727 #define CONFIG_FSL_SATA
 728 #define CONFIG_FSL_SATA_V2
 729 #define CONFIG_LIBATA
 730
 731 #ifdef CONFIG_FSL_SATA
 732 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 733 #define CONFIG_SATA1
 734 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 735 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 736 #define CONFIG_SATA2
 737 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 738 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 739
 740 #define CONFIG_CMD_SATA
 741 #define CONFIG_LBA48
 742 #endif /* #ifdef CONFIG_FSL_SATA  */
 743
 744 #define CONFIG_MMC
 745 #ifdef CONFIG_MMC
 746 #define CONFIG_CMD_MMC
 747 #define CONFIG_DOS_PARTITION
 748 #define CONFIG_FSL_ESDHC
 749 #define CONFIG_GENERIC_MMC
 750 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 751 #endif
 752
 753 #define CONFIG_HAS_FSL_DR_USB
 754
 755 #if defined(CONFIG_HAS_FSL_DR_USB)
 756 #define CONFIG_USB_EHCI
 757
 758 #ifdef CONFIG_USB_EHCI
 759 #define CONFIG_CMD_USB
 760 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 761 #define CONFIG_USB_EHCI_FSL
 762 #define CONFIG_USB_STORAGE
 763 #endif
 764 #endif
 765
 766 /*
 767  * Environment
 768  */
 769 #if defined(CONFIG_SDCARD)
 770 #define CONFIG_ENV_IS_IN_MMC
 771 #define CONFIG_FSL_FIXED_MMC_LOCATION
 772 #define CONFIG_SYS_MMC_ENV_DEV          0
 773 #define CONFIG_ENV_SIZE                 0x2000
 774 #elif defined(CONFIG_SPIFLASH)
 775 #define CONFIG_ENV_IS_IN_SPI_FLASH
 776 #define CONFIG_ENV_SPI_BUS      0
 777 #define CONFIG_ENV_SPI_CS       0
 778 #define CONFIG_ENV_SPI_MAX_HZ   10000000
 779 #define CONFIG_ENV_SPI_MODE     0
 780 #define CONFIG_ENV_OFFSET       0x100000        /* 1MB */
 781 #define CONFIG_ENV_SECT_SIZE    0x10000
 782 #define CONFIG_ENV_SIZE         0x2000
 783 #elif defined(CONFIG_NAND)
 784 #define CONFIG_ENV_IS_IN_NAND
 785 #ifdef CONFIG_TPL_BUILD
 786 #define CONFIG_ENV_SIZE         0x2000
 787 #define CONFIG_ENV_ADDR         (CONFIG_SYS_INIT_L2_ADDR + (160 << 10))
 788 #else
 789 #if defined(CONFIG_P1010RDB_PA)
 790 #define CONFIG_ENV_SIZE         CONFIG_SYS_NAND_BLOCK_SIZE
 791 #define CONFIG_ENV_RANGE        (3 * CONFIG_ENV_SIZE) /* 3*16=48K for env */
 792 #elif defined(CONFIG_P1010RDB_PB)
 793 #define CONFIG_ENV_SIZE         (16 * 1024)
 794 #define CONFIG_ENV_RANGE        (32 * CONFIG_ENV_SIZE) /* new block size 512K */
 795 #endif
 796 #endif
 797 #define CONFIG_ENV_OFFSET       (1024 * 1024)
 798 #elif defined(CONFIG_SYS_RAMBOOT)
 799 #define CONFIG_ENV_IS_NOWHERE           /* Store ENV in memory only */
 800 #define CONFIG_ENV_ADDR                 (CONFIG_SYS_MONITOR_BASE - 0x1000)
 801 #define CONFIG_ENV_SIZE                 0x2000
 802 #else
 803 #define CONFIG_ENV_IS_IN_FLASH
 804 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 805 #define CONFIG_ENV_SIZE         0x2000
 806 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 807 #endif
 808
 809 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 810 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 811
 812 /*
 813  * Command line configuration.
 814  */
 815 #define CONFIG_CMD_DATE
 816 #define CONFIG_CMD_ERRATA
 817 #define CONFIG_CMD_ELF
 818 #define CONFIG_CMD_IRQ
 819 #define CONFIG_CMD_MII
 820 #define CONFIG_CMD_PING
 821 #define CONFIG_CMD_REGINFO
 822
 823 #undef CONFIG_WATCHDOG                  /* watchdog disabled */
 824
 825 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) \
 826                  || defined(CONFIG_FSL_SATA)
 827 #define CONFIG_CMD_EXT2
 828 #define CONFIG_CMD_FAT
 829 #define CONFIG_DOS_PARTITION
 830 #endif
 831
 832 /* Hash command with SHA acceleration supported in hardware */
 833 #ifdef CONFIG_FSL_CAAM
 834 #define CONFIG_CMD_HASH
 835 #define CONFIG_SHA_HW_ACCEL
 836 #endif
 837
 838 /*
 839  * Miscellaneous configurable options
 840  */
 841 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 842 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 843 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 844 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 845
 846 #if defined(CONFIG_CMD_KGDB)
 847 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 848 #else
 849 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 850 #endif
 851 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 852                                                 /* Print Buffer Size */
 853 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 854 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 855
 856 /*
 857  * Internal Definitions
 858  *
 859  * Boot Flags
 860  */
 861 #define BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH */
 862 #define BOOTFLAG_WARM   0x02            /* Software reboot */
 863
 864 /*
 865  * For booting Linux, the board info and command line data
 866  * have to be in the first 64 MB of memory, since this is
 867  * the maximum mapped by the Linux kernel during initialization.
 868  */
 869 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20) /* Initial Memory map for Linux */
 870 #define CONFIG_SYS_BOOTM_LEN    (64 << 20) /* Increase max gunzip size */
 871
 872 #if defined(CONFIG_CMD_KGDB)
 873 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 874 #endif
 875
 876 /*
 877  * Environment Configuration
 878  */
 879
 880 #if defined(CONFIG_TSEC_ENET)
 881 #define CONFIG_HAS_ETH0
 882 #define CONFIG_HAS_ETH1
 883 #define CONFIG_HAS_ETH2
 884 #endif
 885
 886 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 887 #define CONFIG_BOOTFILE         "uImage"
 888 #define CONFIG_UBOOTPATH        u-boot.bin/* U-Boot image on TFTP server */
 889
 890 /* default location for tftp and bootm */
 891 #define CONFIG_LOADADDR         1000000
 892
 893 #define CONFIG_BOOTDELAY        10      /* -1 disables auto-boot */
 894 #undef  CONFIG_BOOTARGS         /* the boot command will set bootargs */
 895
 896 #define CONFIG_BAUDRATE         115200
 897
 898 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 899         "hwconfig=" __stringify(CONFIG_DEF_HWCONFIG)  "\0"      \
 900         "netdev=eth0\0"                                         \
 901         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 902         "loadaddr=1000000\0"                    \
 903         "consoledev=ttyS0\0"                            \
 904         "ramdiskaddr=2000000\0"                 \
 905         "ramdiskfile=rootfs.ext2.gz.uboot\0"            \
 906         "fdtaddr=c00000\0"                              \
 907         "fdtfile=p1010rdb.dtb\0"                \
 908         "bdev=sda1\0"   \
 909         "hwconfig=usb1:dr_mode=host,phy_type=utmi\0"    \
 910         "othbootargs=ramdisk_size=600000\0" \
 911         "usbfatboot=setenv bootargs root=/dev/ram rw "  \
 912         "console=$consoledev,$baudrate $othbootargs; "  \
 913         "usb start;"                    \
 914         "fatload usb 0:2 $loadaddr $bootfile;"          \
 915         "fatload usb 0:2 $fdtaddr $fdtfile;"    \
 916         "fatload usb 0:2 $ramdiskaddr $ramdiskfile;"    \
 917         "bootm $loadaddr $ramdiskaddr $fdtaddr\0"               \
 918         "usbext2boot=setenv bootargs root=/dev/ram rw " \
 919         "console=$consoledev,$baudrate $othbootargs; "  \
 920         "usb start;"                    \
 921         "ext2load usb 0:4 $loadaddr $bootfile;"         \
 922         "ext2load usb 0:4 $fdtaddr $fdtfile;"   \
 923         "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;"   \
 924         "bootm $loadaddr $ramdiskaddr $fdtaddr\0"       \
 925         CONFIG_BOOTMODE
 926
 927 #if defined(CONFIG_P1010RDB_PA)
 928 #define CONFIG_BOOTMODE \
 929         "boot_bank0=i2c dev 0; i2c mw 18 1 f1; i2c mw 18 3 f0;" \
 930         "mw.b ffb00011 0; mw.b ffb00009 0; reset\0" \
 931         "boot_bank1=i2c dev 0; i2c mw 18 1 f1; i2c mw 18 3 f0;" \
 932         "mw.b ffb00011 0; mw.b ffb00009 1; reset\0" \
 933         "boot_nand=i2c dev 0; i2c mw 18 1 f9; i2c mw 18 3 f0;" \
 934         "mw.b ffb00011 0; mw.b ffb00017 1; reset\0"
 935
 936 #elif defined(CONFIG_P1010RDB_PB)
 937 #define CONFIG_BOOTMODE \
 938         "boot_bank0=i2c dev 0; i2c mw 18 1 fe; i2c mw 18 3 0;" \
 939         "i2c mw 19 1 2; i2c mw 19 3 e1; reset\0" \
 940         "boot_bank1=i2c dev 0; i2c mw 18 1 fe; i2c mw 18 3 0;" \
 941         "i2c mw 19 1 12; i2c mw 19 3 e1; reset\0" \
 942         "boot_nand=i2c dev 0; i2c mw 18 1 fc; i2c mw 18 3 0;" \
 943         "i2c mw 19 1 8; i2c mw 19 3 f7; reset\0" \
 944         "boot_spi=i2c dev 0; i2c mw 18 1 fa; i2c mw 18 3 0;" \
 945         "i2c mw 19 1 0; i2c mw 19 3 f7; reset\0" \
 946         "boot_sd=i2c dev 0; i2c mw 18 1 f8; i2c mw 18 3 0;" \
 947         "i2c mw 19 1 4; i2c mw 19 3 f3; reset\0"
 948 #endif
 949
 950 #define CONFIG_RAMBOOTCOMMAND           \
 951         "setenv bootargs root=/dev/ram rw "     \
 952         "console=$consoledev,$baudrate $othbootargs; "  \
 953         "tftp $ramdiskaddr $ramdiskfile;"       \
 954         "tftp $loadaddr $bootfile;"             \
 955         "tftp $fdtaddr $fdtfile;"               \
 956         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 957
 958 #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND
 959
 960 #include <asm/fsl_secure_boot.h>
 961
 962 #ifdef CONFIG_SECURE_BOOT
 963 #define CONFIG_CMD_BLOB
 964 #endif
 965
 966 #endif  /* __CONFIG_H */