include/configs/P1010RDB.h

   1 /*
   2  * Copyright 2010-2011 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * P010 RDB board configuration file
   9  */
  10
  11 #ifndef __CONFIG_H
  12 #define __CONFIG_H
  13
  14 #define CONFIG_DISPLAY_BOARDINFO
  15
  16 #define CONFIG_P1010
  17 #define CONFIG_E500                     /* BOOKE e500 family */
  18 #include <asm/config_mpc85xx.h>
  19 #define CONFIG_NAND_FSL_IFC
  20
  21 #ifdef CONFIG_SDCARD
  22 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
  23 #define CONFIG_SPL_SERIAL_SUPPORT
  24 #define CONFIG_SPL_MMC_SUPPORT
  25 #define CONFIG_SPL_MMC_MINIMAL
  26 #define CONFIG_SPL_FLUSH_IMAGE
  27 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  28 #define CONFIG_SPL_LIBGENERIC_SUPPORT
  29 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  30 #define CONFIG_FSL_LAW                 /* Use common FSL init code */
  31 #define CONFIG_SYS_TEXT_BASE            0x11001000
  32 #define CONFIG_SPL_TEXT_BASE            0xD0001000
  33 #define CONFIG_SPL_PAD_TO               0x18000
  34 #define CONFIG_SPL_MAX_SIZE             (96 * 1024)
  35 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (512 << 10)
  36 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x11000000)
  37 #define CONFIG_SYS_MMC_U_BOOT_START     (0x11000000)
  38 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (96 << 10)
  39 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  40 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  41 #define CONFIG_SPL_MMC_BOOT
  42 #ifdef CONFIG_SPL_BUILD
  43 #define CONFIG_SPL_COMMON_INIT_DDR
  44 #endif
  45 #endif
  46
  47 #ifdef CONFIG_SPIFLASH
  48 #ifdef CONFIG_SECURE_BOOT
  49 #define CONFIG_RAMBOOT_SPIFLASH
  50 #define CONFIG_SYS_TEXT_BASE            0x11000000
  51 #define CONFIG_RESET_VECTOR_ADDRESS     0x110bfffc
  52 #else
  53 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
  54 #define CONFIG_SPL_SERIAL_SUPPORT
  55 #define CONFIG_SPL_SPI_SUPPORT
  56 #define CONFIG_SPL_SPI_FLASH_SUPPORT
  57 #define CONFIG_SPL_SPI_FLASH_MINIMAL
  58 #define CONFIG_SPL_FLUSH_IMAGE
  59 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  60 #define CONFIG_SPL_LIBGENERIC_SUPPORT
  61 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  62 #define CONFIG_FSL_LAW         /* Use common FSL init code */
  63 #define CONFIG_SYS_TEXT_BASE                    0x11001000
  64 #define CONFIG_SPL_TEXT_BASE                    0xD0001000
  65 #define CONFIG_SPL_PAD_TO                       0x18000
  66 #define CONFIG_SPL_MAX_SIZE                     (96 * 1024)
  67 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (512 << 10)
  68 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x11000000)
  69 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x11000000)
  70 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (96 << 10)
  71 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  72 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  73 #define CONFIG_SPL_SPI_BOOT
  74 #ifdef CONFIG_SPL_BUILD
  75 #define CONFIG_SPL_COMMON_INIT_DDR
  76 #endif
  77 #endif
  78 #endif
  79
  80 #ifdef CONFIG_NAND
  81 #ifdef CONFIG_SECURE_BOOT
  82 #define CONFIG_SPL_INIT_MINIMAL
  83 #define CONFIG_SPL_SERIAL_SUPPORT
  84 #define CONFIG_SPL_NAND_SUPPORT
  85 #define CONFIG_SPL_NAND_BOOT
  86 #define CONFIG_SPL_FLUSH_IMAGE
  87 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  88
  89 #define CONFIG_SYS_TEXT_BASE            0x00201000
  90 #define CONFIG_SPL_TEXT_BASE            0xFFFFE000
  91 #define CONFIG_SPL_MAX_SIZE             8192
  92 #define CONFIG_SPL_RELOC_TEXT_BASE      0x00100000
  93 #define CONFIG_SPL_RELOC_STACK          0x00100000
  94 #define CONFIG_SYS_NAND_U_BOOT_SIZE     ((768 << 10) - 0x2000)
  95 #define CONFIG_SYS_NAND_U_BOOT_DST      (0x00200000 - CONFIG_SPL_MAX_SIZE)
  96 #define CONFIG_SYS_NAND_U_BOOT_START    0x00200000
  97 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0
  98 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  99 #else
 100 #ifdef CONFIG_TPL_BUILD
 101 #define CONFIG_SPL_NAND_BOOT
 102 #define CONFIG_SPL_FLUSH_IMAGE
 103 #define CONFIG_SPL_NAND_INIT
 104 #define CONFIG_TPL_SERIAL_SUPPORT
 105 #define CONFIG_TPL_LIBGENERIC_SUPPORT
 106 #define CONFIG_TPL_LIBCOMMON_SUPPORT
 107 #define CONFIG_TPL_NAND_SUPPORT
 108 #define CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT
 109 #define CONFIG_SPL_COMMON_INIT_DDR
 110 #define CONFIG_SPL_MAX_SIZE             (128 << 10)
 111 #define CONFIG_SPL_TEXT_BASE            0xD0001000
 112 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 113 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (576 << 10)
 114 #define CONFIG_SYS_NAND_U_BOOT_DST      (0x11000000)
 115 #define CONFIG_SYS_NAND_U_BOOT_START    (0x11000000)
 116 #define CONFIG_SYS_NAND_U_BOOT_OFFS     ((128 + 128) << 10)
 117 #elif defined(CONFIG_SPL_BUILD)
 118 #define CONFIG_SPL_INIT_MINIMAL
 119 #define CONFIG_SPL_SERIAL_SUPPORT
 120 #define CONFIG_SPL_NAND_SUPPORT
 121 #define CONFIG_SPL_NAND_MINIMAL
 122 #define CONFIG_SPL_FLUSH_IMAGE
 123 #define CONFIG_SPL_TEXT_BASE            0xff800000
 124 #define CONFIG_SPL_MAX_SIZE             8192
 125 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (128 << 10)
 126 #define CONFIG_SYS_NAND_U_BOOT_DST      0xD0000000
 127 #define CONFIG_SYS_NAND_U_BOOT_START    0xD0000000
 128 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (128 << 10)
 129 #endif
 130 #define CONFIG_SPL_PAD_TO       0x20000
 131 #define CONFIG_TPL_PAD_TO       0x20000
 132 #define CONFIG_SPL_TARGET       "u-boot-with-spl.bin"
 133 #define CONFIG_SYS_TEXT_BASE    0x11001000
 134 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
 135 #endif
 136 #endif
 137
 138 #ifdef CONFIG_NAND_SECBOOT      /* NAND Boot */
 139 #define CONFIG_RAMBOOT_NAND
 140 #define CONFIG_SYS_TEXT_BASE            0x11000000
 141 #define CONFIG_RESET_VECTOR_ADDRESS     0x110bfffc
 142 #endif
 143
 144 #ifndef CONFIG_SYS_TEXT_BASE
 145 #define CONFIG_SYS_TEXT_BASE            0xeff40000
 146 #endif
 147
 148 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 149 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
 150 #endif
 151
 152 #ifdef CONFIG_SPL_BUILD
 153 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 154 #else
 155 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 156 #endif
 157
 158 /* High Level Configuration Options */
 159 #define CONFIG_BOOKE                    /* BOOKE */
 160 #define CONFIG_E500                     /* BOOKE e500 family */
 161 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
 162 #define CONFIG_FSL_CAAM                 /* Enable SEC/CAAM */
 163 #define CONFIG_SYS_HAS_SERDES           /* common SERDES init code */
 164
 165 #define CONFIG_PCI                      /* Enable PCI/PCIE */
 166 #if defined(CONFIG_PCI)
 167 #define CONFIG_PCIE1                    /* PCIE controller 1 (slot 1) */
 168 #define CONFIG_PCIE2                    /* PCIE controller 2 (slot 2) */
 169 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
 170 #define CONFIG_PCI_INDIRECT_BRIDGE      /* indirect PCI bridge support */
 171 #define CONFIG_FSL_PCIE_RESET           /* need PCIe reset errata */
 172 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
 173
 174 #define CONFIG_CMD_PCI
 175
 176 /*
 177  * PCI Windows
 178  * Memory space is mapped 1-1, but I/O space must start from 0.
 179  */
 180 /* controller 1, Slot 1, tgtid 1, Base address a000 */
 181 #define CONFIG_SYS_PCIE1_NAME           "mini PCIe Slot"
 182 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 183 #ifdef CONFIG_PHYS_64BIT
 184 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 185 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 186 #else
 187 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 188 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 189 #endif
 190 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 191 #define CONFIG_SYS_PCIE1_IO_VIRT        0xffc00000
 192 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 193 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 194 #ifdef CONFIG_PHYS_64BIT
 195 #define CONFIG_SYS_PCIE1_IO_PHYS        0xfffc00000ull
 196 #else
 197 #define CONFIG_SYS_PCIE1_IO_PHYS        0xffc00000
 198 #endif
 199
 200 /* controller 2, Slot 2, tgtid 2, Base address 9000 */
 201 #if defined(CONFIG_P1010RDB_PA)
 202 #define CONFIG_SYS_PCIE2_NAME           "PCIe Slot"
 203 #elif defined(CONFIG_P1010RDB_PB)
 204 #define CONFIG_SYS_PCIE2_NAME           "mini PCIe Slot"
 205 #endif
 206 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 207 #ifdef CONFIG_PHYS_64BIT
 208 #define CONFIG_SYS_PCIE2_MEM_BUS        0xc0000000
 209 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 210 #else
 211 #define CONFIG_SYS_PCIE2_MEM_BUS        0xa0000000
 212 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xa0000000
 213 #endif
 214 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 215 #define CONFIG_SYS_PCIE2_IO_VIRT        0xffc10000
 216 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 217 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 218 #ifdef CONFIG_PHYS_64BIT
 219 #define CONFIG_SYS_PCIE2_IO_PHYS        0xfffc10000ull
 220 #else
 221 #define CONFIG_SYS_PCIE2_IO_PHYS        0xffc10000
 222 #endif
 223
 224 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 225
 226 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 227 #define CONFIG_DOS_PARTITION
 228 #endif
 229
 230 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
 231 #define CONFIG_TSEC_ENET
 232 #define CONFIG_ENV_OVERWRITE
 233
 234 #define CONFIG_DDR_CLK_FREQ     66666666 /* DDRCLK on P1010 RDB */
 235 #define CONFIG_SYS_CLK_FREQ     66666666 /* SYSCLK for P1010 RDB */
 236
 237 #define CONFIG_MISC_INIT_R
 238 #define CONFIG_HWCONFIG
 239 /*
 240  * These can be toggled for performance analysis, otherwise use default.
 241  */
 242 #define CONFIG_L2_CACHE                 /* toggle L2 cache */
 243 #define CONFIG_BTB                      /* toggle branch predition */
 244
 245 #define CONFIG_ADDR_STREAMING           /* toggle addr streaming */
 246
 247 #define CONFIG_ENABLE_36BIT_PHYS
 248
 249 #ifdef CONFIG_PHYS_64BIT
 250 #define CONFIG_ADDR_MAP                 1
 251 #define CONFIG_SYS_NUM_ADDR_MAP         16      /* number of TLB1 entries */
 252 #endif
 253
 254 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 255 #define CONFIG_SYS_MEMTEST_END          0x1fffffff
 256 #define CONFIG_PANIC_HANG               /* do not reset board on panic */
 257
 258 /* DDR Setup */
 259 #define CONFIG_SYS_FSL_DDR3
 260 #define CONFIG_SYS_DDR_RAW_TIMING
 261 #define CONFIG_DDR_SPD
 262 #define CONFIG_SYS_SPD_BUS_NUM          1
 263 #define SPD_EEPROM_ADDRESS              0x52
 264
 265 #define CONFIG_MEM_INIT_VALUE           0xDeadBeef
 266
 267 #ifndef __ASSEMBLY__
 268 extern unsigned long get_sdram_size(void);
 269 #endif
 270 #define CONFIG_SYS_SDRAM_SIZE           get_sdram_size() /* DDR size */
 271 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 272 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 273
 274 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 275 #define CONFIG_CHIP_SELECTS_PER_CTRL    1
 276
 277 /* DDR3 Controller Settings */
 278 #define CONFIG_SYS_DDR_CS0_BNDS         0x0000003f
 279 #define CONFIG_SYS_DDR_CS0_CONFIG       0x80014302
 280 #define CONFIG_SYS_DDR_CS0_CONFIG_2     0x00000000
 281 #define CONFIG_SYS_DDR_DATA_INIT        0xdeadbeef
 282 #define CONFIG_SYS_DDR_INIT_ADDR        0x00000000
 283 #define CONFIG_SYS_DDR_INIT_EXT_ADDR    0x00000000
 284 #define CONFIG_SYS_DDR_MODE_CONTROL     0x00000000
 285 #define CONFIG_SYS_DDR_ZQ_CONTROL       0x89080600
 286 #define CONFIG_SYS_DDR_SR_CNTR          0x00000000
 287 #define CONFIG_SYS_DDR_RCW_1            0x00000000
 288 #define CONFIG_SYS_DDR_RCW_2            0x00000000
 289 #define CONFIG_SYS_DDR_CONTROL          0xc70c0008      /* Type = DDR3  */
 290 #define CONFIG_SYS_DDR_CONTROL_2        0x24401000
 291 #define CONFIG_SYS_DDR_TIMING_4         0x00000001
 292 #define CONFIG_SYS_DDR_TIMING_5         0x03402400
 293
 294 #define CONFIG_SYS_DDR_TIMING_3_800     0x00030000
 295 #define CONFIG_SYS_DDR_TIMING_0_800     0x00110104
 296 #define CONFIG_SYS_DDR_TIMING_1_800     0x6f6b8644
 297 #define CONFIG_SYS_DDR_TIMING_2_800     0x0FA888CF
 298 #define CONFIG_SYS_DDR_CLK_CTRL_800     0x03000000
 299 #define CONFIG_SYS_DDR_MODE_1_800       0x00441420
 300 #define CONFIG_SYS_DDR_MODE_2_800       0x00000000
 301 #define CONFIG_SYS_DDR_INTERVAL_800     0x0C300100
 302 #define CONFIG_SYS_DDR_WRLVL_CONTROL_800 0x8675f608
 303
 304 /* settings for DDR3 at 667MT/s */
 305 #define CONFIG_SYS_DDR_TIMING_3_667             0x00010000
 306 #define CONFIG_SYS_DDR_TIMING_0_667             0x00110004
 307 #define CONFIG_SYS_DDR_TIMING_1_667             0x5d59e544
 308 #define CONFIG_SYS_DDR_TIMING_2_667             0x0FA890CD
 309 #define CONFIG_SYS_DDR_CLK_CTRL_667             0x03000000
 310 #define CONFIG_SYS_DDR_MODE_1_667               0x00441210
 311 #define CONFIG_SYS_DDR_MODE_2_667               0x00000000
 312 #define CONFIG_SYS_DDR_INTERVAL_667             0x0a280000
 313 #define CONFIG_SYS_DDR_WRLVL_CONTROL_667        0x8675F608
 314
 315 #define CONFIG_SYS_CCSRBAR                      0xffe00000
 316 #define CONFIG_SYS_CCSRBAR_PHYS_LOW             CONFIG_SYS_CCSRBAR
 317
 318 /* Don't relocate CCSRBAR while in NAND_SPL */
 319 #ifdef CONFIG_SPL_BUILD
 320 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
 321 #endif
 322
 323 /*
 324  * Memory map
 325  *
 326  * 0x0000_0000  0x3fff_ffff     DDR                     1G cacheable
 327  * 0x8000_0000  0xbfff_ffff     PCI Express Mem         1.5G non-cacheable
 328  * 0xffc0_0000  0xffc3_ffff     PCI IO range            256k non-cacheable
 329  *
 330  * Localbus non-cacheable
 331  * 0xff80_0000  0xff8f_ffff     NAND Flash              1M non-cacheable
 332  * 0xffb0_0000  0xffbf_ffff     Board CPLD              1M non-cacheable
 333  * 0xffd0_0000  0xffd0_3fff     L1 for stack            16K Cacheable TLB0
 334  * 0xffe0_0000  0xffef_ffff     CCSR                    1M non-cacheable
 335  */
 336
 337 /*
 338  * IFC Definitions
 339  */
 340 /* NOR Flash on IFC */
 341 #ifdef CONFIG_SPL_BUILD
 342 #define CONFIG_SYS_NO_FLASH
 343 #endif
 344
 345 #define CONFIG_SYS_FLASH_BASE           0xee000000
 346 #define CONFIG_SYS_MAX_FLASH_SECT       256     /* 32M */
 347
 348 #ifdef CONFIG_PHYS_64BIT
 349 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 350 #else
 351 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 352 #endif
 353
 354 #define CONFIG_SYS_NOR_CSPR     (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 355                                 CSPR_PORT_SIZE_16 | \
 356                                 CSPR_MSEL_NOR | \
 357                                 CSPR_V)
 358 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(32*1024*1024)
 359 #define CONFIG_SYS_NOR_CSOR     CSOR_NOR_ADM_SHIFT(7)
 360 /* NOR Flash Timing Params */
 361 #define CONFIG_SYS_NOR_FTIM0    FTIM0_NOR_TACSE(0x4) | \
 362                                 FTIM0_NOR_TEADC(0x5) | \
 363                                 FTIM0_NOR_TEAHC(0x5)
 364 #define CONFIG_SYS_NOR_FTIM1    FTIM1_NOR_TACO(0x1e) | \
 365                                 FTIM1_NOR_TRAD_NOR(0x0f)
 366 #define CONFIG_SYS_NOR_FTIM2    FTIM2_NOR_TCS(0x4) | \
 367                                 FTIM2_NOR_TCH(0x4) | \
 368                                 FTIM2_NOR_TWP(0x1c)
 369 #define CONFIG_SYS_NOR_FTIM3    0x0
 370
 371 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 372 #define CONFIG_SYS_FLASH_QUIET_TEST
 373 #define CONFIG_FLASH_SHOW_PROGRESS      45      /* count down from 45/5: 9..1 */
 374 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 375
 376 #undef CONFIG_SYS_FLASH_CHECKSUM
 377 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 378 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 379
 380 /* CFI for NOR Flash */
 381 #define CONFIG_FLASH_CFI_DRIVER
 382 #define CONFIG_SYS_FLASH_CFI
 383 #define CONFIG_SYS_FLASH_EMPTY_INFO
 384 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 385
 386 /* NAND Flash on IFC */
 387 #define CONFIG_SYS_NAND_BASE            0xff800000
 388 #ifdef CONFIG_PHYS_64BIT
 389 #define CONFIG_SYS_NAND_BASE_PHYS       0xfff800000ull
 390 #else
 391 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 392 #endif
 393
 394 #define CONFIG_MTD_DEVICE
 395 #define CONFIG_MTD_PARTITION
 396 #define CONFIG_CMD_MTDPARTS
 397 #define MTDIDS_DEFAULT                  "nand0=ff800000.flash"
 398 #define MTDPARTS_DEFAULT                \
 399         "mtdparts=ff800000.flash:2m(uboot-env),1m(dtb),5m(kernel),56m(fs),-(usr)"
 400
 401 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 402                                 | CSPR_PORT_SIZE_8      \
 403                                 | CSPR_MSEL_NAND        \
 404                                 | CSPR_V)
 405 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 406
 407 #if defined(CONFIG_P1010RDB_PA)
 408 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 409                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 410                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 411                                 | CSOR_NAND_RAL_2       /* RAL = 2 Bytes */ \
 412                                 | CSOR_NAND_PGS_512     /* Page Size = 512b */ \
 413                                 | CSOR_NAND_SPRZ_16     /* Spare size = 16 */ \
 414                                 | CSOR_NAND_PB(32))     /* 32 Pages Per Block */
 415 #define CONFIG_SYS_NAND_BLOCK_SIZE      (16 * 1024)
 416
 417 #elif defined(CONFIG_P1010RDB_PB)
 418 #define CONFIG_SYS_NAND_ONFI_DETECTION
 419 #define CONFIG_SYS_NAND_CSOR   (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 420                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 421                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 422                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 423                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 424                                 | CSOR_NAND_SPRZ_224    /* Spare size = 224 */ \
 425                                 | CSOR_NAND_PB(128))  /*Pages Per Block = 128 */
 426 #define CONFIG_SYS_NAND_BLOCK_SIZE     (512 * 1024)
 427 #endif
 428
 429 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 430 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 431 #define CONFIG_CMD_NAND
 432
 433 #if defined(CONFIG_P1010RDB_PA)
 434 /* NAND Flash Timing Params */
 435 #define CONFIG_SYS_NAND_FTIM0           FTIM0_NAND_TCCST(0x01) | \
 436                                         FTIM0_NAND_TWP(0x0C)   | \
 437                                         FTIM0_NAND_TWCHT(0x04) | \
 438                                         FTIM0_NAND_TWH(0x05)
 439 #define CONFIG_SYS_NAND_FTIM1           FTIM1_NAND_TADLE(0x1d) | \
 440                                         FTIM1_NAND_TWBE(0x1d)  | \
 441                                         FTIM1_NAND_TRR(0x07)   | \
 442                                         FTIM1_NAND_TRP(0x0c)
 443 #define CONFIG_SYS_NAND_FTIM2           FTIM2_NAND_TRAD(0x0c) | \
 444                                         FTIM2_NAND_TREH(0x05) | \
 445                                         FTIM2_NAND_TWHRE(0x0f)
 446 #define CONFIG_SYS_NAND_FTIM3           FTIM3_NAND_TWW(0x04)
 447
 448 #elif defined(CONFIG_P1010RDB_PB)
 449 /* support MT29F16G08ABABAWP 4k-pagesize 2G-bytes NAND */
 450 /* ONFI NAND Flash mode0 Timing Params */
 451 #define CONFIG_SYS_NAND_FTIM0  (FTIM0_NAND_TCCST(0x07)| \
 452                                         FTIM0_NAND_TWP(0x18)   | \
 453                                         FTIM0_NAND_TWCHT(0x07) | \
 454                                         FTIM0_NAND_TWH(0x0a))
 455 #define CONFIG_SYS_NAND_FTIM1  (FTIM1_NAND_TADLE(0x32)| \
 456                                         FTIM1_NAND_TWBE(0x39)  | \
 457                                         FTIM1_NAND_TRR(0x0e)   | \
 458                                         FTIM1_NAND_TRP(0x18))
 459 #define CONFIG_SYS_NAND_FTIM2  (FTIM2_NAND_TRAD(0x0f) | \
 460                                         FTIM2_NAND_TREH(0x0a)  | \
 461                                         FTIM2_NAND_TWHRE(0x1e))
 462 #define CONFIG_SYS_NAND_FTIM3   0x0
 463 #endif
 464
 465 #define CONFIG_SYS_NAND_DDR_LAW         11
 466
 467 /* Set up IFC registers for boot location NOR/NAND */
 468 #if defined(CONFIG_NAND) || defined(CONFIG_NAND_SECBOOT)
 469 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 470 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 471 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 472 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 473 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 474 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 475 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 476 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR_CSPR
 477 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 478 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 479 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 480 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 481 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 482 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 483 #else
 484 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR_CSPR
 485 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 486 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 487 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 488 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 489 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 490 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 491 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 492 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 493 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 494 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 495 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 496 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 497 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 498 #endif
 499
 500 /* CPLD on IFC */
 501 #define CONFIG_SYS_CPLD_BASE            0xffb00000
 502
 503 #ifdef CONFIG_PHYS_64BIT
 504 #define CONFIG_SYS_CPLD_BASE_PHYS       0xfffb00000ull
 505 #else
 506 #define CONFIG_SYS_CPLD_BASE_PHYS       CONFIG_SYS_CPLD_BASE
 507 #endif
 508
 509 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
 510                                 | CSPR_PORT_SIZE_8 \
 511                                 | CSPR_MSEL_GPCM \
 512                                 | CSPR_V)
 513 #define CONFIG_SYS_AMASK3               IFC_AMASK(64*1024)
 514 #define CONFIG_SYS_CSOR3                0x0
 515 /* CPLD Timing parameters for IFC CS3 */
 516 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 517                                         FTIM0_GPCM_TEADC(0x0e) | \
 518                                         FTIM0_GPCM_TEAHC(0x0e))
 519 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 520                                         FTIM1_GPCM_TRAD(0x1f))
 521 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 522                                         FTIM2_GPCM_TCH(0x8) | \
 523                                         FTIM2_GPCM_TWP(0x1f))
 524 #define CONFIG_SYS_CS3_FTIM3            0x0
 525
 526 #if defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH) || \
 527         defined(CONFIG_RAMBOOT_NAND)
 528 #define CONFIG_SYS_RAMBOOT
 529 #define CONFIG_SYS_EXTRA_ENV_RELOC
 530 #else
 531 #undef CONFIG_SYS_RAMBOOT
 532 #endif
 533
 534 #ifdef CONFIG_SYS_FSL_ERRATUM_IFC_A003399
 535 #if !defined(CONFIG_SPL) && !defined(CONFIG_SYS_RAMBOOT)
 536 #define CONFIG_A003399_NOR_WORKAROUND
 537 #endif
 538 #endif
 539
 540 #define CONFIG_BOARD_EARLY_INIT_F       /* Call board_pre_init */
 541 #define CONFIG_BOARD_EARLY_INIT_R
 542
 543 #define CONFIG_SYS_INIT_RAM_LOCK
 544 #define CONFIG_SYS_INIT_RAM_ADDR        0xffd00000 /* stack in RAM */
 545 #define CONFIG_SYS_INIT_RAM_SIZE        0x00004000 /* End of used area in RAM */
 546
 547 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE \
 548                                                 - GENERATED_GBL_DATA_SIZE)
 549 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 550
 551 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 552 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)   /* Reserved for malloc*/
 553
 554 /*
 555  * Config the L2 Cache as L2 SRAM
 556  */
 557 #if defined(CONFIG_SPL_BUILD)
 558 #if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH)
 559 #define CONFIG_SYS_INIT_L2_ADDR         0xD0000000
 560 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 561 #define CONFIG_SYS_L2_SIZE              (256 << 10)
 562 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 563 #define CONFIG_SPL_RELOC_TEXT_BASE      0xD0001000
 564 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024)
 565 #define CONFIG_SPL_RELOC_STACK_SIZE     (16 << 10)
 566 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SYS_INIT_L2_ADDR + 128 * 1024)
 567 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (128 << 10)
 568 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L2_ADDR + 96 * 1024)
 569 #elif defined(CONFIG_NAND)
 570 #ifdef CONFIG_TPL_BUILD
 571 #define CONFIG_SYS_INIT_L2_ADDR         0xD0000000
 572 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 573 #define CONFIG_SYS_L2_SIZE              (256 << 10)
 574 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 575 #define CONFIG_SPL_RELOC_TEXT_BASE      0xD0001000
 576 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024)
 577 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024)
 578 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (48 << 10)
 579 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024)
 580 #else
 581 #define CONFIG_SYS_INIT_L2_ADDR         0xD0000000
 582 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 583 #define CONFIG_SYS_L2_SIZE              (256 << 10)
 584 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 585 #define CONFIG_SPL_RELOC_TEXT_BASE      (CONFIG_SYS_INIT_L2_END - 0x3000)
 586 #define CONFIG_SPL_RELOC_STACK          ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF)
 587 #endif
 588 #endif
 589 #endif
 590
 591 /* Serial Port */
 592 #define CONFIG_CONS_INDEX       1
 593 #undef  CONFIG_SERIAL_SOFTWARE_FIFO
 594 #define CONFIG_SYS_NS16550_SERIAL
 595 #define CONFIG_SYS_NS16550_REG_SIZE     1
 596 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 597 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL)
 598 #define CONFIG_NS16550_MIN_FUNCTIONS
 599 #endif
 600
 601 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    /* determine from environment */
 602
 603 #define CONFIG_SYS_BAUDRATE_TABLE       \
 604         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 605
 606 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
 607 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
 608
 609 /* I2C */
 610 #define CONFIG_SYS_I2C
 611 #define CONFIG_SYS_I2C_FSL
 612 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 613 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 614 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 615 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 616 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 617 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x3100
 618 #define I2C_PCA9557_ADDR1               0x18
 619 #define I2C_PCA9557_ADDR2               0x19
 620 #define I2C_PCA9557_BUS_NUM             0
 621
 622 /* I2C EEPROM */
 623 #if defined(CONFIG_P1010RDB_PB)
 624 #define CONFIG_ID_EEPROM
 625 #ifdef CONFIG_ID_EEPROM
 626 #define CONFIG_SYS_I2C_EEPROM_NXID
 627 #endif
 628 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 629 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 630 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 631 #define MAX_NUM_PORTS                   9 /* for 128Bytes EEPROM */
 632 #endif
 633 /* enable read and write access to EEPROM */
 634 #define CONFIG_CMD_EEPROM
 635 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 636 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 637 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 638
 639 /* RTC */
 640 #define CONFIG_RTC_PT7C4338
 641 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
 642
 643 /*
 644  * SPI interface will not be available in case of NAND boot SPI CS0 will be
 645  * used for SLIC
 646  */
 647 #if !defined(CONFIG_NAND) || !defined(CONFIG_NAND_SECBOOT)
 648 /* eSPI - Enhanced SPI */
 649 #define CONFIG_SF_DEFAULT_SPEED         10000000
 650 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
 651 #endif
 652
 653 #if defined(CONFIG_TSEC_ENET)
 654 #define CONFIG_MII                      /* MII PHY management */
 655 #define CONFIG_MII_DEFAULT_TSEC 1       /* Allow unregistered phys */
 656 #define CONFIG_TSEC1    1
 657 #define CONFIG_TSEC1_NAME       "eTSEC1"
 658 #define CONFIG_TSEC2    1
 659 #define CONFIG_TSEC2_NAME       "eTSEC2"
 660 #define CONFIG_TSEC3    1
 661 #define CONFIG_TSEC3_NAME       "eTSEC3"
 662
 663 #define TSEC1_PHY_ADDR          1
 664 #define TSEC2_PHY_ADDR          0
 665 #define TSEC3_PHY_ADDR          2
 666
 667 #define TSEC1_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 668 #define TSEC2_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 669 #define TSEC3_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 670
 671 #define TSEC1_PHYIDX            0
 672 #define TSEC2_PHYIDX            0
 673 #define TSEC3_PHYIDX            0
 674
 675 #define CONFIG_ETHPRIME         "eTSEC1"
 676
 677 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 678
 679 /* TBI PHY configuration for SGMII mode */
 680 #define CONFIG_TSEC_TBICR_SETTINGS ( \
 681                 TBICR_PHY_RESET \
 682                 | TBICR_ANEG_ENABLE \
 683                 | TBICR_FULL_DUPLEX \
 684                 | TBICR_SPEED1_SET \
 685                 )
 686
 687 #endif  /* CONFIG_TSEC_ENET */
 688
 689 /* SATA */
 690 #define CONFIG_FSL_SATA
 691 #define CONFIG_FSL_SATA_V2
 692 #define CONFIG_LIBATA
 693
 694 #ifdef CONFIG_FSL_SATA
 695 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 696 #define CONFIG_SATA1
 697 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 698 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 699 #define CONFIG_SATA2
 700 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 701 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 702
 703 #define CONFIG_CMD_SATA
 704 #define CONFIG_LBA48
 705 #endif /* #ifdef CONFIG_FSL_SATA  */
 706
 707 #define CONFIG_MMC
 708 #ifdef CONFIG_MMC
 709 #define CONFIG_DOS_PARTITION
 710 #define CONFIG_FSL_ESDHC
 711 #define CONFIG_GENERIC_MMC
 712 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 713 #endif
 714
 715 #define CONFIG_HAS_FSL_DR_USB
 716
 717 #if defined(CONFIG_HAS_FSL_DR_USB)
 718 #define CONFIG_USB_EHCI
 719
 720 #ifdef CONFIG_USB_EHCI
 721 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 722 #define CONFIG_USB_EHCI_FSL
 723 #endif
 724 #endif
 725
 726 /*
 727  * Environment
 728  */
 729 #if defined(CONFIG_SDCARD)
 730 #define CONFIG_ENV_IS_IN_MMC
 731 #define CONFIG_FSL_FIXED_MMC_LOCATION
 732 #define CONFIG_SYS_MMC_ENV_DEV          0
 733 #define CONFIG_ENV_SIZE                 0x2000
 734 #elif defined(CONFIG_SPIFLASH)
 735 #define CONFIG_ENV_IS_IN_SPI_FLASH
 736 #define CONFIG_ENV_SPI_BUS      0
 737 #define CONFIG_ENV_SPI_CS       0
 738 #define CONFIG_ENV_SPI_MAX_HZ   10000000
 739 #define CONFIG_ENV_SPI_MODE     0
 740 #define CONFIG_ENV_OFFSET       0x100000        /* 1MB */
 741 #define CONFIG_ENV_SECT_SIZE    0x10000
 742 #define CONFIG_ENV_SIZE         0x2000
 743 #elif defined(CONFIG_NAND)
 744 #define CONFIG_ENV_IS_IN_NAND
 745 #ifdef CONFIG_TPL_BUILD
 746 #define CONFIG_ENV_SIZE         0x2000
 747 #define CONFIG_ENV_ADDR         (CONFIG_SYS_INIT_L2_ADDR + (160 << 10))
 748 #else
 749 #if defined(CONFIG_P1010RDB_PA)
 750 #define CONFIG_ENV_SIZE         CONFIG_SYS_NAND_BLOCK_SIZE
 751 #define CONFIG_ENV_RANGE        (3 * CONFIG_ENV_SIZE) /* 3*16=48K for env */
 752 #elif defined(CONFIG_P1010RDB_PB)
 753 #define CONFIG_ENV_SIZE         (16 * 1024)
 754 #define CONFIG_ENV_RANGE        (32 * CONFIG_ENV_SIZE) /* new block size 512K */
 755 #endif
 756 #endif
 757 #define CONFIG_ENV_OFFSET       (1024 * 1024)
 758 #elif defined(CONFIG_SYS_RAMBOOT)
 759 #define CONFIG_ENV_IS_NOWHERE           /* Store ENV in memory only */
 760 #define CONFIG_ENV_ADDR                 (CONFIG_SYS_MONITOR_BASE - 0x1000)
 761 #define CONFIG_ENV_SIZE                 0x2000
 762 #else
 763 #define CONFIG_ENV_IS_IN_FLASH
 764 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 765 #define CONFIG_ENV_SIZE         0x2000
 766 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 767 #endif
 768
 769 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 770 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 771
 772 /*
 773  * Command line configuration.
 774  */
 775 #define CONFIG_CMD_DATE
 776 #define CONFIG_CMD_ERRATA
 777 #define CONFIG_CMD_IRQ
 778 #define CONFIG_CMD_REGINFO
 779
 780 #undef CONFIG_WATCHDOG                  /* watchdog disabled */
 781
 782 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) \
 783                  || defined(CONFIG_FSL_SATA)
 784 #define CONFIG_DOS_PARTITION
 785 #endif
 786
 787 /* Hash command with SHA acceleration supported in hardware */
 788 #ifdef CONFIG_FSL_CAAM
 789 #define CONFIG_CMD_HASH
 790 #define CONFIG_SHA_HW_ACCEL
 791 #endif
 792
 793 /*
 794  * Miscellaneous configurable options
 795  */
 796 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 797 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 798 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 799 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 800
 801 #if defined(CONFIG_CMD_KGDB)
 802 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 803 #else
 804 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 805 #endif
 806 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 807                                                 /* Print Buffer Size */
 808 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 809 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 810
 811 /*
 812  * For booting Linux, the board info and command line data
 813  * have to be in the first 64 MB of memory, since this is
 814  * the maximum mapped by the Linux kernel during initialization.
 815  */
 816 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20) /* Initial Memory map for Linux */
 817 #define CONFIG_SYS_BOOTM_LEN    (64 << 20) /* Increase max gunzip size */
 818
 819 #if defined(CONFIG_CMD_KGDB)
 820 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 821 #endif
 822
 823 /*
 824  * Environment Configuration
 825  */
 826
 827 #if defined(CONFIG_TSEC_ENET)
 828 #define CONFIG_HAS_ETH0
 829 #define CONFIG_HAS_ETH1
 830 #define CONFIG_HAS_ETH2
 831 #endif
 832
 833 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 834 #define CONFIG_BOOTFILE         "uImage"
 835 #define CONFIG_UBOOTPATH        u-boot.bin/* U-Boot image on TFTP server */
 836
 837 /* default location for tftp and bootm */
 838 #define CONFIG_LOADADDR         1000000
 839
 840 #undef  CONFIG_BOOTARGS         /* the boot command will set bootargs */
 841
 842 #define CONFIG_BAUDRATE         115200
 843
 844 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 845         "hwconfig=" __stringify(CONFIG_DEF_HWCONFIG)  "\0"      \
 846         "netdev=eth0\0"                                         \
 847         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 848         "loadaddr=1000000\0"                    \
 849         "consoledev=ttyS0\0"                            \
 850         "ramdiskaddr=2000000\0"                 \
 851         "ramdiskfile=rootfs.ext2.gz.uboot\0"            \
 852         "fdtaddr=1e00000\0"                             \
 853         "fdtfile=p1010rdb.dtb\0"                \
 854         "bdev=sda1\0"   \
 855         "hwconfig=usb1:dr_mode=host,phy_type=utmi\0"    \
 856         "othbootargs=ramdisk_size=600000\0" \
 857         "usbfatboot=setenv bootargs root=/dev/ram rw "  \
 858         "console=$consoledev,$baudrate $othbootargs; "  \
 859         "usb start;"                    \
 860         "fatload usb 0:2 $loadaddr $bootfile;"          \
 861         "fatload usb 0:2 $fdtaddr $fdtfile;"    \
 862         "fatload usb 0:2 $ramdiskaddr $ramdiskfile;"    \
 863         "bootm $loadaddr $ramdiskaddr $fdtaddr\0"               \
 864         "usbext2boot=setenv bootargs root=/dev/ram rw " \
 865         "console=$consoledev,$baudrate $othbootargs; "  \
 866         "usb start;"                    \
 867         "ext2load usb 0:4 $loadaddr $bootfile;"         \
 868         "ext2load usb 0:4 $fdtaddr $fdtfile;"   \
 869         "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;"   \
 870         "bootm $loadaddr $ramdiskaddr $fdtaddr\0"       \
 871         CONFIG_BOOTMODE
 872
 873 #if defined(CONFIG_P1010RDB_PA)
 874 #define CONFIG_BOOTMODE \
 875         "boot_bank0=i2c dev 0; i2c mw 18 1 f1; i2c mw 18 3 f0;" \
 876         "mw.b ffb00011 0; mw.b ffb00009 0; reset\0" \
 877         "boot_bank1=i2c dev 0; i2c mw 18 1 f1; i2c mw 18 3 f0;" \
 878         "mw.b ffb00011 0; mw.b ffb00009 1; reset\0" \
 879         "boot_nand=i2c dev 0; i2c mw 18 1 f9; i2c mw 18 3 f0;" \
 880         "mw.b ffb00011 0; mw.b ffb00017 1; reset\0"
 881
 882 #elif defined(CONFIG_P1010RDB_PB)
 883 #define CONFIG_BOOTMODE \
 884         "boot_bank0=i2c dev 0; i2c mw 18 1 fe; i2c mw 18 3 0;" \
 885         "i2c mw 19 1 2; i2c mw 19 3 e1; reset\0" \
 886         "boot_bank1=i2c dev 0; i2c mw 18 1 fe; i2c mw 18 3 0;" \
 887         "i2c mw 19 1 12; i2c mw 19 3 e1; reset\0" \
 888         "boot_nand=i2c dev 0; i2c mw 18 1 fc; i2c mw 18 3 0;" \
 889         "i2c mw 19 1 8; i2c mw 19 3 f7; reset\0" \
 890         "boot_spi=i2c dev 0; i2c mw 18 1 fa; i2c mw 18 3 0;" \
 891         "i2c mw 19 1 0; i2c mw 19 3 f7; reset\0" \
 892         "boot_sd=i2c dev 0; i2c mw 18 1 f8; i2c mw 18 3 0;" \
 893         "i2c mw 19 1 4; i2c mw 19 3 f3; reset\0"
 894 #endif
 895
 896 #define CONFIG_RAMBOOTCOMMAND           \
 897         "setenv bootargs root=/dev/ram rw "     \
 898         "console=$consoledev,$baudrate $othbootargs; "  \
 899         "tftp $ramdiskaddr $ramdiskfile;"       \
 900         "tftp $loadaddr $bootfile;"             \
 901         "tftp $fdtaddr $fdtfile;"               \
 902         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 903
 904 #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND
 905
 906 #include <asm/fsl_secure_boot.h>
 907
 908 #endif  /* __CONFIG_H */