include/configs/P1022DS.h

   1 /*
   2  * Copyright 2010-2012 Freescale Semiconductor, Inc.
   3  * Authors: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
   4  *          Timur Tabi <timur@freescale.com>
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 #include "../board/freescale/common/ics307_clk.h"
  13
  14 #define CONFIG_SYS_GENERIC_BOARD
  15 #define CONFIG_DISPLAY_BOARDINFO
  16
  17 #ifdef CONFIG_36BIT
  18 #define CONFIG_PHYS_64BIT
  19 #endif
  20
  21 #ifdef CONFIG_SDCARD
  22 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
  23 #define CONFIG_SPL_ENV_SUPPORT
  24 #define CONFIG_SPL_SERIAL_SUPPORT
  25 #define CONFIG_SPL_MMC_SUPPORT
  26 #define CONFIG_SPL_MMC_MINIMAL
  27 #define CONFIG_SPL_FLUSH_IMAGE
  28 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  29 #define CONFIG_SPL_LIBGENERIC_SUPPORT
  30 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  31 #define CONFIG_SPL_I2C_SUPPORT
  32 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  33 #define CONFIG_SYS_TEXT_BASE            0x11001000
  34 #define CONFIG_SPL_TEXT_BASE            0xf8f81000
  35 #define CONFIG_SPL_PAD_TO               0x20000
  36 #define CONFIG_SPL_MAX_SIZE             (128 * 1024)
  37 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
  38 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x11000000)
  39 #define CONFIG_SYS_MMC_U_BOOT_START     (0x11000000)
  40 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (128 << 10)
  41 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  42 #define CONFIG_SYS_LDSCRIPT             "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  43 #define CONFIG_SPL_MMC_BOOT
  44 #ifdef CONFIG_SPL_BUILD
  45 #define CONFIG_SPL_COMMON_INIT_DDR
  46 #endif
  47 #endif
  48
  49 #ifdef CONFIG_SPIFLASH
  50 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
  51 #define CONFIG_SPL_ENV_SUPPORT
  52 #define CONFIG_SPL_SERIAL_SUPPORT
  53 #define CONFIG_SPL_SPI_SUPPORT
  54 #define CONFIG_SPL_SPI_FLASH_SUPPORT
  55 #define CONFIG_SPL_SPI_FLASH_MINIMAL
  56 #define CONFIG_SPL_FLUSH_IMAGE
  57 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  58 #define CONFIG_SPL_LIBGENERIC_SUPPORT
  59 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  60 #define CONFIG_SPL_I2C_SUPPORT
  61 #define CONFIG_FSL_LAW          /* Use common FSL init code */
  62 #define CONFIG_SYS_TEXT_BASE            0x11001000
  63 #define CONFIG_SPL_TEXT_BASE            0xf8f81000
  64 #define CONFIG_SPL_PAD_TO               0x20000
  65 #define CONFIG_SPL_MAX_SIZE             (128 * 1024)
  66 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (768 << 10)
  67 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x11000000)
  68 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x11000000)
  69 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (128 << 10)
  70 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  71 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  72 #define CONFIG_SPL_SPI_BOOT
  73 #ifdef CONFIG_SPL_BUILD
  74 #define CONFIG_SPL_COMMON_INIT_DDR
  75 #endif
  76 #endif
  77
  78 #define CONFIG_NAND_FSL_ELBC
  79 #define CONFIG_SYS_NAND_MAX_ECCPOS      56
  80 #define CONFIG_SYS_NAND_MAX_OOBFREE     5
  81
  82 #ifdef CONFIG_NAND
  83 #ifdef CONFIG_TPL_BUILD
  84 #define CONFIG_SPL_NAND_BOOT
  85 #define CONFIG_SPL_FLUSH_IMAGE
  86 #define CONFIG_SPL_ENV_SUPPORT
  87 #define CONFIG_SPL_NAND_INIT
  88 #define CONFIG_SPL_SERIAL_SUPPORT
  89 #define CONFIG_SPL_LIBGENERIC_SUPPORT
  90 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  91 #define CONFIG_SPL_I2C_SUPPORT
  92 #define CONFIG_SPL_NAND_SUPPORT
  93 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
  94 #define CONFIG_SPL_COMMON_INIT_DDR
  95 #define CONFIG_SPL_MAX_SIZE             (128 << 10)
  96 #define CONFIG_SPL_TEXT_BASE            0xf8f81000
  97 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  98 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (832 << 10)
  99 #define CONFIG_SYS_NAND_U_BOOT_DST      (0x11000000)
 100 #define CONFIG_SYS_NAND_U_BOOT_START    (0x11000000)
 101 #define CONFIG_SYS_NAND_U_BOOT_OFFS     ((128 + 128) << 10)
 102 #elif defined(CONFIG_SPL_BUILD)
 103 #define CONFIG_SPL_INIT_MINIMAL
 104 #define CONFIG_SPL_SERIAL_SUPPORT
 105 #define CONFIG_SPL_NAND_SUPPORT
 106 #define CONFIG_SPL_FLUSH_IMAGE
 107 #define CONFIG_SPL_TEXT_BASE            0xff800000
 108 #define CONFIG_SPL_MAX_SIZE             4096
 109 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (128 << 10)
 110 #define CONFIG_SYS_NAND_U_BOOT_DST      0xf8f80000
 111 #define CONFIG_SYS_NAND_U_BOOT_START    0xf8f80000
 112 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (128 << 10)
 113 #endif
 114 #define CONFIG_SPL_PAD_TO               0x20000
 115 #define CONFIG_TPL_PAD_TO               0x20000
 116 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
 117 #define CONFIG_SYS_TEXT_BASE            0x11001000
 118 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
 119 #endif
 120
 121 /* High Level Configuration Options */
 122 #define CONFIG_BOOKE                    /* BOOKE */
 123 #define CONFIG_E500                     /* BOOKE e500 family */
 124 #define CONFIG_P1022
 125 #define CONFIG_P1022DS
 126 #define CONFIG_MP                       /* support multiple processors */
 127
 128 #ifndef CONFIG_SYS_TEXT_BASE
 129 #define CONFIG_SYS_TEXT_BASE    0xeff40000
 130 #endif
 131
 132 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 133 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
 134 #endif
 135
 136 #define CONFIG_FSL_ELBC                 /* Has Enhanced localbus controller */
 137 #define CONFIG_PCI                      /* Enable PCI/PCIE */
 138 #define CONFIG_PCIE1                    /* PCIE controler 1 (slot 1) */
 139 #define CONFIG_PCIE2                    /* PCIE controler 2 (slot 2) */
 140 #define CONFIG_PCIE3                    /* PCIE controler 3 (ULI bridge) */
 141 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
 142 #define CONFIG_FSL_PCIE_RESET           /* need PCIe reset errata */
 143 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
 144
 145 #define CONFIG_ENABLE_36BIT_PHYS
 146
 147 #ifdef CONFIG_PHYS_64BIT
 148 #define CONFIG_ADDR_MAP
 149 #define CONFIG_SYS_NUM_ADDR_MAP         16      /* number of TLB1 entries */
 150 #endif
 151
 152 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
 153
 154 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk()
 155 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk()
 156 #define CONFIG_ICS307_REFCLK_HZ 33333000  /* ICS307 clock chip ref freq */
 157
 158 /*
 159  * These can be toggled for performance analysis, otherwise use default.
 160  */
 161 #define CONFIG_L2_CACHE
 162 #define CONFIG_BTB
 163
 164 #define CONFIG_SYS_MEMTEST_START        0x00000000
 165 #define CONFIG_SYS_MEMTEST_END          0x7fffffff
 166
 167 #define CONFIG_SYS_CCSRBAR              0xffe00000
 168 #define CONFIG_SYS_CCSRBAR_PHYS_LOW     CONFIG_SYS_CCSRBAR
 169
 170 /* IN case of NAND bootloader relocate CCSRBAR in RAMboot code not in the 4k
 171        SPL code*/
 172 #ifdef CONFIG_SPL_BUILD
 173 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
 174 #endif
 175
 176
 177 /* DDR Setup */
 178 #define CONFIG_DDR_SPD
 179 #define CONFIG_VERY_BIG_RAM
 180 #define CONFIG_SYS_FSL_DDR3
 181
 182 #ifdef CONFIG_DDR_ECC
 183 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 184 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 185 #endif
 186
 187 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 188 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 189
 190 #define CONFIG_NUM_DDR_CONTROLLERS      1
 191 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 192 #define CONFIG_CHIP_SELECTS_PER_CTRL    (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
 193
 194 /* I2C addresses of SPD EEPROMs */
 195 #define CONFIG_SYS_SPD_BUS_NUM          1
 196 #define SPD_EEPROM_ADDRESS              0x51    /* CTLR 0 DIMM 0 */
 197
 198 /* These are used when DDR doesn't use SPD.  */
 199 #define CONFIG_SYS_SDRAM_SIZE           2048
 200 #define CONFIG_SYS_SDRAM_SIZE_LAW       LAW_SIZE_2G
 201 #define CONFIG_SYS_DDR_CS0_BNDS         0x0000003F
 202 #define CONFIG_SYS_DDR_CS0_CONFIG       0x80014202
 203 #define CONFIG_SYS_DDR_CS1_BNDS         0x0040007F
 204 #define CONFIG_SYS_DDR_CS1_CONFIG       0x80014202
 205 #define CONFIG_SYS_DDR_TIMING_3         0x00010000
 206 #define CONFIG_SYS_DDR_TIMING_0         0x40110104
 207 #define CONFIG_SYS_DDR_TIMING_1         0x5c5bd746
 208 #define CONFIG_SYS_DDR_TIMING_2         0x0fa8d4ca
 209 #define CONFIG_SYS_DDR_MODE_1           0x00441221
 210 #define CONFIG_SYS_DDR_MODE_2           0x00000000
 211 #define CONFIG_SYS_DDR_INTERVAL         0x0a280100
 212 #define CONFIG_SYS_DDR_DATA_INIT        0xdeadbeef
 213 #define CONFIG_SYS_DDR_CLK_CTRL         0x02800000
 214 #define CONFIG_SYS_DDR_CONTROL          0xc7000008
 215 #define CONFIG_SYS_DDR_CONTROL_2        0x24401041
 216 #define CONFIG_SYS_DDR_TIMING_4         0x00220001
 217 #define CONFIG_SYS_DDR_TIMING_5         0x02401400
 218 #define CONFIG_SYS_DDR_ZQ_CONTROL       0x89080600
 219 #define CONFIG_SYS_DDR_WRLVL_CONTROL    0x8675f608
 220
 221
 222 /*
 223  * Memory map
 224  *
 225  * 0x0000_0000  0x7fff_ffff     DDR                     2G Cacheable
 226  * 0x8000_0000  0xdfff_ffff     PCI Express Mem         1.5G non-cacheable
 227  * 0xffc0_0000  0xffc2_ffff     PCI IO range            192K non-cacheable
 228  *
 229  * Localbus cacheable (TBD)
 230  * 0xXXXX_XXXX  0xXXXX_XXXX     SRAM                    YZ M Cacheable
 231  *
 232  * Localbus non-cacheable
 233  * 0xe000_0000  0xe80f_ffff     Promjet/free            128M non-cacheable
 234  * 0xe800_0000  0xefff_ffff     FLASH                   128M non-cacheable
 235  * 0xff80_0000  0xff80_7fff     NAND                    32K non-cacheable
 236  * 0xffdf_0000  0xffdf_7fff     PIXIS                   32K non-cacheable TLB0
 237  * 0xffd0_0000  0xffd0_3fff     L1 for stack            16K Cacheable TLB0
 238  * 0xffe0_0000  0xffef_ffff     CCSR                    1M non-cacheable
 239  */
 240
 241 /*
 242  * Local Bus Definitions
 243  */
 244 #define CONFIG_SYS_FLASH_BASE           0xe8000000 /* start of FLASH 128M */
 245 #ifdef CONFIG_PHYS_64BIT
 246 #define CONFIG_SYS_FLASH_BASE_PHYS      0xfe8000000ull
 247 #else
 248 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 249 #endif
 250
 251 #define CONFIG_FLASH_BR_PRELIM  \
 252         (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V)
 253 #define CONFIG_FLASH_OR_PRELIM  (OR_AM_128MB | 0xff7)
 254
 255 #ifdef CONFIG_NAND
 256 #define CONFIG_SYS_BR1_PRELIM   CONFIG_FLASH_BR_PRELIM  /* NOR Base Address */
 257 #define CONFIG_SYS_OR1_PRELIM   CONFIG_FLASH_OR_PRELIM  /* NOR Options */
 258 #else
 259 #define CONFIG_SYS_BR0_PRELIM   CONFIG_FLASH_BR_PRELIM  /* NOR Base Address */
 260 #define CONFIG_SYS_OR0_PRELIM   CONFIG_FLASH_OR_PRELIM  /* NOR Options */
 261 #endif
 262
 263 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 264 #define CONFIG_SYS_FLASH_QUIET_TEST
 265 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 266
 267 #define CONFIG_SYS_MAX_FLASH_BANKS      1
 268 #define CONFIG_SYS_MAX_FLASH_SECT       1024
 269
 270 #ifndef CONFIG_SYS_MONITOR_BASE
 271 #ifdef CONFIG_SPL_BUILD
 272 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SPL_TEXT_BASE
 273 #else
 274 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE    /* start of monitor */
 275 #endif
 276 #endif
 277
 278 #define CONFIG_FLASH_CFI_DRIVER
 279 #define CONFIG_SYS_FLASH_CFI
 280 #define CONFIG_SYS_FLASH_EMPTY_INFO
 281
 282 /* Nand Flash */
 283 #if defined(CONFIG_NAND_FSL_ELBC)
 284 #define CONFIG_SYS_NAND_BASE            0xff800000
 285 #ifdef CONFIG_PHYS_64BIT
 286 #define CONFIG_SYS_NAND_BASE_PHYS       0xfff800000ull
 287 #else
 288 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 289 #endif
 290
 291 #define CONFIG_SYS_NAND_BASE_LIST       {CONFIG_SYS_NAND_BASE}
 292 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 293 #define CONFIG_CMD_NAND                 1
 294 #define CONFIG_SYS_NAND_BLOCK_SIZE      (256 * 1024)
 295 #define CONFIG_ELBC_NAND_SPL_STATIC_PGSIZE
 296
 297 /* NAND flash config */
 298 #define CONFIG_SYS_NAND_BR_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 299                                | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 300                                | BR_PS_8               /* Port Size = 8 bit */ \
 301                                | BR_MS_FCM             /* MSEL = FCM */ \
 302                                | BR_V)                 /* valid */
 303 #define CONFIG_SYS_NAND_OR_PRELIM  (OR_AM_32KB         /* length 256K */ \
 304                                | OR_FCM_PGS            /* Large Page*/ \
 305                                | OR_FCM_CSCT \
 306                                | OR_FCM_CST \
 307                                | OR_FCM_CHT \
 308                                | OR_FCM_SCY_1 \
 309                                | OR_FCM_TRLX \
 310                                | OR_FCM_EHTR)
 311 #ifdef CONFIG_NAND
 312 #define CONFIG_SYS_BR0_PRELIM   CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 313 #define CONFIG_SYS_OR0_PRELIM   CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 314 #else
 315 #define CONFIG_SYS_BR1_PRELIM   CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 316 #define CONFIG_SYS_OR1_PRELIM   CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 317 #endif
 318
 319 #endif /* CONFIG_NAND_FSL_ELBC */
 320
 321 #define CONFIG_BOARD_EARLY_INIT_F
 322 #define CONFIG_BOARD_EARLY_INIT_R
 323 #define CONFIG_MISC_INIT_R
 324 #define CONFIG_HWCONFIG
 325
 326 #define CONFIG_FSL_NGPIXIS
 327 #define PIXIS_BASE              0xffdf0000      /* PIXIS registers */
 328 #ifdef CONFIG_PHYS_64BIT
 329 #define PIXIS_BASE_PHYS         0xfffdf0000ull
 330 #else
 331 #define PIXIS_BASE_PHYS         PIXIS_BASE
 332 #endif
 333
 334 #define CONFIG_SYS_BR2_PRELIM   (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V)
 335 #define CONFIG_SYS_OR2_PRELIM   (OR_AM_32KB | 0x6ff7)
 336
 337 #define PIXIS_LBMAP_SWITCH      7
 338 #define PIXIS_LBMAP_MASK        0xF0
 339 #define PIXIS_LBMAP_ALTBANK     0x20
 340 #define PIXIS_SPD               0x07
 341 #define PIXIS_SPD_SYSCLK_MASK   0x07
 342 #define PIXIS_ELBC_SPI_MASK     0xc0
 343 #define PIXIS_SPI               0x80
 344
 345 #define CONFIG_SYS_INIT_RAM_LOCK
 346 #define CONFIG_SYS_INIT_RAM_ADDR        0xffd00000 /* Initial L1 address */
 347 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000 /* Size of used area in RAM */
 348
 349 #define CONFIG_SYS_GBL_DATA_OFFSET      \
 350         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 351 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 352
 353 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 354 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
 355
 356 /*
 357  * Config the L2 Cache as L2 SRAM
 358 */
 359 #if defined(CONFIG_SPL_BUILD)
 360 #if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH)
 361 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000
 362 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 363 #define CONFIG_SYS_L2_SIZE              (256 << 10)
 364 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 365 #define CONFIG_SPL_RELOC_TEXT_BASE      0xf8f81000
 366 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SYS_INIT_L2_ADDR + 116 * 1024)
 367 #define CONFIG_SPL_RELOC_STACK_SIZE     (32 << 10)
 368 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SYS_INIT_L2_ADDR + 148 * 1024)
 369 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (108 << 10)
 370 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024)
 371 #elif defined(CONFIG_NAND)
 372 #ifdef CONFIG_TPL_BUILD
 373 #define CONFIG_SYS_INIT_L2_ADDR         0xf8f80000
 374 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 375 #define CONFIG_SYS_L2_SIZE              (256 << 10)
 376 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 377 #define CONFIG_SPL_RELOC_TEXT_BASE      0xf8f81000
 378 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024)
 379 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024)
 380 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (48 << 10)
 381 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024)
 382 #else
 383 #define CONFIG_SYS_INIT_L2_ADDR         0xf8f80000
 384 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 385 #define CONFIG_SYS_L2_SIZE              (256 << 10)
 386 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 387 #define CONFIG_SPL_RELOC_TEXT_BASE      (CONFIG_SYS_INIT_L2_END - 0x2000)
 388 #define CONFIG_SPL_RELOC_STACK          ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF)
 389 #endif
 390 #endif
 391 #endif
 392
 393 /*
 394  * Serial Port
 395  */
 396 #define CONFIG_CONS_INDEX               1
 397 #define CONFIG_SYS_NS16550
 398 #define CONFIG_SYS_NS16550_SERIAL
 399 #define CONFIG_SYS_NS16550_REG_SIZE     1
 400 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 401 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL)
 402 #define CONFIG_NS16550_MIN_FUNCTIONS
 403 #endif
 404
 405 #define CONFIG_SYS_BAUDRATE_TABLE       \
 406         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 407
 408 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
 409 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
 410
 411 /* Use the HUSH parser */
 412 #define CONFIG_SYS_HUSH_PARSER
 413
 414 /* Video */
 415
 416 #ifdef CONFIG_FSL_DIU_FB
 417 #define CONFIG_SYS_DIU_ADDR     (CONFIG_SYS_CCSRBAR + 0x10000)
 418 #define CONFIG_VIDEO
 419 #define CONFIG_CMD_BMP
 420 #define CONFIG_CFB_CONSOLE
 421 #define CONFIG_VIDEO_SW_CURSOR
 422 #define CONFIG_VGA_AS_SINGLE_DEVICE
 423 #define CONFIG_VIDEO_LOGO
 424 #define CONFIG_VIDEO_BMP_LOGO
 425 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
 426 /*
 427  * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so
 428  * disable empty flash sector detection, which is I/O-intensive.
 429  */
 430 #undef CONFIG_SYS_FLASH_EMPTY_INFO
 431 #endif
 432
 433 #ifndef CONFIG_FSL_DIU_FB
 434 #endif
 435
 436 #ifdef CONFIG_ATI
 437 #define VIDEO_IO_OFFSET         CONFIG_SYS_PCIE1_IO_VIRT
 438 #define CONFIG_VIDEO
 439 #define CONFIG_BIOSEMU
 440 #define CONFIG_VIDEO_SW_CURSOR
 441 #define CONFIG_ATI_RADEON_FB
 442 #define CONFIG_VIDEO_LOGO
 443 #define CONFIG_SYS_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET
 444 #define CONFIG_CFB_CONSOLE
 445 #define CONFIG_VGA_AS_SINGLE_DEVICE
 446 #endif
 447
 448 /*
 449  * Pass open firmware flat tree
 450  */
 451 #define CONFIG_OF_LIBFDT
 452 #define CONFIG_OF_BOARD_SETUP
 453 #define CONFIG_OF_STDOUT_VIA_ALIAS
 454
 455 /* new uImage format support */
 456 #define CONFIG_FIT
 457 #define CONFIG_FIT_VERBOSE
 458
 459 /* I2C */
 460 #define CONFIG_SYS_I2C
 461 #define CONFIG_SYS_I2C_FSL
 462 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 463 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 464 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 465 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 466 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 467 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x3100
 468 #define CONFIG_SYS_I2C_NOPROBES         {{0, 0x29}}
 469
 470 /*
 471  * I2C2 EEPROM
 472  */
 473 #define CONFIG_ID_EEPROM
 474 #define CONFIG_SYS_I2C_EEPROM_NXID
 475 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 476 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 477 #define CONFIG_SYS_EEPROM_BUS_NUM       1
 478
 479 /*
 480  * eSPI - Enhanced SPI
 481  */
 482 #define CONFIG_SPI_FLASH
 483 #define CONFIG_SPI_FLASH_SPANSION
 484
 485 #define CONFIG_HARD_SPI
 486 #define CONFIG_FSL_ESPI
 487
 488 #define CONFIG_CMD_SF
 489 #define CONFIG_SF_DEFAULT_SPEED         10000000
 490 #define CONFIG_SF_DEFAULT_MODE          0
 491
 492 /*
 493  * General PCI
 494  * Memory space is mapped 1-1, but I/O space must start from 0.
 495  */
 496
 497 /* controller 1, Slot 2, tgtid 1, Base address a000 */
 498 #define CONFIG_SYS_PCIE1_MEM_VIRT       0xc0000000
 499 #ifdef CONFIG_PHYS_64BIT
 500 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 501 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc40000000ull
 502 #else
 503 #define CONFIG_SYS_PCIE1_MEM_BUS        0xc0000000
 504 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc0000000
 505 #endif
 506 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 507 #define CONFIG_SYS_PCIE1_IO_VIRT        0xffc20000
 508 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 509 #ifdef CONFIG_PHYS_64BIT
 510 #define CONFIG_SYS_PCIE1_IO_PHYS        0xfffc20000ull
 511 #else
 512 #define CONFIG_SYS_PCIE1_IO_PHYS        0xffc20000
 513 #endif
 514 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 515
 516 /* controller 2, direct to uli, tgtid 2, Base address 9000 */
 517 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 518 #ifdef CONFIG_PHYS_64BIT
 519 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 520 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 521 #else
 522 #define CONFIG_SYS_PCIE2_MEM_BUS        0xa0000000
 523 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xa0000000
 524 #endif
 525 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 526 #define CONFIG_SYS_PCIE2_IO_VIRT        0xffc10000
 527 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 528 #ifdef CONFIG_PHYS_64BIT
 529 #define CONFIG_SYS_PCIE2_IO_PHYS        0xfffc10000ull
 530 #else
 531 #define CONFIG_SYS_PCIE2_IO_PHYS        0xffc10000
 532 #endif
 533 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 534
 535 /* controller 3, Slot 1, tgtid 3, Base address b000 */
 536 #define CONFIG_SYS_PCIE3_MEM_VIRT       0x80000000
 537 #ifdef CONFIG_PHYS_64BIT
 538 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 539 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc00000000ull
 540 #else
 541 #define CONFIG_SYS_PCIE3_MEM_BUS        0x80000000
 542 #define CONFIG_SYS_PCIE3_MEM_PHYS       0x80000000
 543 #endif
 544 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
 545 #define CONFIG_SYS_PCIE3_IO_VIRT        0xffc00000
 546 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 547 #ifdef CONFIG_PHYS_64BIT
 548 #define CONFIG_SYS_PCIE3_IO_PHYS        0xfffc00000ull
 549 #else
 550 #define CONFIG_SYS_PCIE3_IO_PHYS        0xffc00000
 551 #endif
 552 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 553
 554 #ifdef CONFIG_PCI
 555 #define CONFIG_PCI_INDIRECT_BRIDGE
 556 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 557 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 558 #define CONFIG_E1000                    /* Define e1000 pci Ethernet card */
 559 #endif
 560
 561 /* SATA */
 562 #define CONFIG_LIBATA
 563 #define CONFIG_FSL_SATA
 564 #define CONFIG_FSL_SATA_V2
 565
 566 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 567 #define CONFIG_SATA1
 568 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 569 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 570 #define CONFIG_SATA2
 571 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 572 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 573
 574 #ifdef CONFIG_FSL_SATA
 575 #define CONFIG_LBA48
 576 #define CONFIG_CMD_SATA
 577 #define CONFIG_DOS_PARTITION
 578 #define CONFIG_CMD_EXT2
 579 #endif
 580
 581 #define CONFIG_MMC
 582 #ifdef CONFIG_MMC
 583 #define CONFIG_CMD_MMC
 584 #define CONFIG_FSL_ESDHC
 585 #define CONFIG_GENERIC_MMC
 586 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 587 #endif
 588
 589 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI)
 590 #define CONFIG_CMD_EXT2
 591 #define CONFIG_CMD_FAT
 592 #define CONFIG_DOS_PARTITION
 593 #endif
 594
 595 #define CONFIG_TSEC_ENET
 596 #ifdef CONFIG_TSEC_ENET
 597
 598 #define CONFIG_TSECV2
 599
 600 #define CONFIG_MII                      /* MII PHY management */
 601 #define CONFIG_TSEC1            1
 602 #define CONFIG_TSEC1_NAME       "eTSEC1"
 603 #define CONFIG_TSEC2            1
 604 #define CONFIG_TSEC2_NAME       "eTSEC2"
 605
 606 #define TSEC1_PHY_ADDR          1
 607 #define TSEC2_PHY_ADDR          2
 608
 609 #define TSEC1_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 610 #define TSEC2_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 611
 612 #define TSEC1_PHYIDX            0
 613 #define TSEC2_PHYIDX            0
 614
 615 #define CONFIG_ETHPRIME         "eTSEC1"
 616
 617 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 618 #endif
 619
 620 /*
 621  * Dynamic MTD Partition support with mtdparts
 622  */
 623 #define CONFIG_MTD_DEVICE
 624 #define CONFIG_MTD_PARTITIONS
 625 #define CONFIG_CMD_MTDPARTS
 626 #define CONFIG_FLASH_CFI_MTD
 627 #ifdef CONFIG_PHYS_64BIT
 628 #define MTDIDS_DEFAULT "nor0=fe8000000.nor"
 629 #define MTDPARTS_DEFAULT "mtdparts=fe8000000.nor:48m(ramdisk)," \
 630                         "14m(diagnostic),2m(dink),6m(kernel),58112k(fs)," \
 631                         "512k(dtb),768k(u-boot)"
 632 #else
 633 #define MTDIDS_DEFAULT "nor0=e8000000.nor"
 634 #define MTDPARTS_DEFAULT "mtdparts=e8000000.nor:48m(ramdisk)," \
 635                         "14m(diagnostic),2m(dink),6m(kernel),58112k(fs)," \
 636                         "512k(dtb),768k(u-boot)"
 637 #endif
 638
 639 /*
 640  * Environment
 641  */
 642 #ifdef CONFIG_SPIFLASH
 643 #define CONFIG_ENV_IS_IN_SPI_FLASH
 644 #define CONFIG_ENV_SPI_BUS      0
 645 #define CONFIG_ENV_SPI_CS       0
 646 #define CONFIG_ENV_SPI_MAX_HZ   10000000
 647 #define CONFIG_ENV_SPI_MODE     0
 648 #define CONFIG_ENV_SIZE         0x2000  /* 8KB */
 649 #define CONFIG_ENV_OFFSET       0x100000        /* 1MB */
 650 #define CONFIG_ENV_SECT_SIZE    0x10000
 651 #elif defined(CONFIG_SDCARD)
 652 #define CONFIG_ENV_IS_IN_MMC
 653 #define CONFIG_FSL_FIXED_MMC_LOCATION
 654 #define CONFIG_ENV_SIZE         0x2000
 655 #define CONFIG_SYS_MMC_ENV_DEV  0
 656 #elif defined(CONFIG_NAND)
 657 #ifdef CONFIG_TPL_BUILD
 658 #define CONFIG_ENV_SIZE         0x2000
 659 #define CONFIG_ENV_ADDR         (CONFIG_SYS_INIT_L2_ADDR + (160 << 10))
 660 #else
 661 #define CONFIG_ENV_SIZE         CONFIG_SYS_NAND_BLOCK_SIZE
 662 #endif
 663 #define CONFIG_ENV_IS_IN_NAND
 664 #define CONFIG_ENV_OFFSET       (1024 * 1024)
 665 #define CONFIG_ENV_RANGE        (3 * CONFIG_ENV_SIZE)
 666 #elif defined(CONFIG_SYS_RAMBOOT)
 667 #define CONFIG_ENV_IS_NOWHERE   /* Store ENV in memory only */
 668 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - 0x1000)
 669 #define CONFIG_ENV_SIZE         0x2000
 670 #else
 671 #define CONFIG_ENV_IS_IN_FLASH
 672 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 673 #define CONFIG_ENV_SIZE         0x2000
 674 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 675 #endif
 676
 677 #define CONFIG_LOADS_ECHO
 678 #define CONFIG_SYS_LOADS_BAUD_CHANGE
 679
 680 /*
 681  * Command line configuration.
 682  */
 683 #include <config_cmd_default.h>
 684
 685 #define CONFIG_CMD_ELF
 686 #define CONFIG_CMD_ERRATA
 687 #define CONFIG_CMD_IRQ
 688 #define CONFIG_CMD_I2C
 689 #define CONFIG_CMD_MII
 690 #define CONFIG_CMD_PING
 691 #define CONFIG_CMD_SETEXPR
 692 #define CONFIG_CMD_REGINFO
 693
 694 #ifdef CONFIG_PCI
 695 #define CONFIG_CMD_PCI
 696 #define CONFIG_CMD_NET
 697 #endif
 698
 699 /*
 700  * USB
 701  */
 702 #define CONFIG_HAS_FSL_DR_USB
 703 #ifdef CONFIG_HAS_FSL_DR_USB
 704 #define CONFIG_USB_EHCI
 705
 706 #ifdef CONFIG_USB_EHCI
 707 #define CONFIG_CMD_USB
 708 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 709 #define CONFIG_USB_EHCI_FSL
 710 #define CONFIG_USB_STORAGE
 711 #define CONFIG_CMD_FAT
 712 #endif
 713 #endif
 714
 715 /*
 716  * Miscellaneous configurable options
 717  */
 718 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 719 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 720 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 721 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 722 #ifdef CONFIG_CMD_KGDB
 723 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 724 #else
 725 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 726 #endif
 727 /* Print Buffer Size */
 728 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 729 #define CONFIG_SYS_MAXARGS      16
 730 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
 731
 732 /*
 733  * For booting Linux, the board info and command line data
 734  * have to be in the first 64 MB of memory, since this is
 735  * the maximum mapped by the Linux kernel during initialization.
 736  */
 737 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial Memory map for Linux*/
 738 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 739
 740 #ifdef CONFIG_CMD_KGDB
 741 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 742 #endif
 743
 744 /*
 745  * Environment Configuration
 746  */
 747
 748 #define CONFIG_HOSTNAME         p1022ds
 749 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 750 #define CONFIG_BOOTFILE         "uImage"
 751 #define CONFIG_UBOOTPATH        u-boot.bin      /* U-Boot image on TFTP server */
 752
 753 #define CONFIG_LOADADDR         1000000
 754
 755 #define CONFIG_BOOTDELAY        10      /* -1 disables auto-boot */
 756
 757 #define CONFIG_BAUDRATE 115200
 758
 759 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 760         "netdev=eth0\0"                                         \
 761         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 762         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 763         "tftpflash=tftpboot $loadaddr $uboot && "               \
 764                 "protect off $ubootaddr +$filesize && "         \
 765                 "erase $ubootaddr +$filesize && "               \
 766                 "cp.b $loadaddr $ubootaddr $filesize && "       \
 767                 "protect on $ubootaddr +$filesize && "          \
 768                 "cmp.b $loadaddr $ubootaddr $filesize\0"        \
 769         "consoledev=ttyS0\0"                                    \
 770         "ramdiskaddr=2000000\0"                                 \
 771         "ramdiskfile=rootfs.ext2.gz.uboot\0"                    \
 772         "fdtaddr=c00000\0"                                      \
 773         "fdtfile=p1022ds.dtb\0"                                 \
 774         "bdev=sda3\0"                                           \
 775         "hwconfig=esdhc;audclk:12\0"
 776
 777 #define CONFIG_HDBOOT                                   \
 778         "setenv bootargs root=/dev/$bdev rw "           \
 779         "console=$consoledev,$baudrate $othbootargs $videobootargs;"    \
 780         "tftp $loadaddr $bootfile;"                     \
 781         "tftp $fdtaddr $fdtfile;"                       \
 782         "bootm $loadaddr - $fdtaddr"
 783
 784 #define CONFIG_NFSBOOTCOMMAND                                           \
 785         "setenv bootargs root=/dev/nfs rw "                             \
 786         "nfsroot=$serverip:$rootpath "                                  \
 787         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 788         "console=$consoledev,$baudrate $othbootargs $videobootargs;"    \
 789         "tftp $loadaddr $bootfile;"                                     \
 790         "tftp $fdtaddr $fdtfile;"                                       \
 791         "bootm $loadaddr - $fdtaddr"
 792
 793 #define CONFIG_RAMBOOTCOMMAND                                           \
 794         "setenv bootargs root=/dev/ram rw "                             \
 795         "console=$consoledev,$baudrate $othbootargs $videobootargs;"    \
 796         "tftp $ramdiskaddr $ramdiskfile;"                               \
 797         "tftp $loadaddr $bootfile;"                                     \
 798         "tftp $fdtaddr $fdtfile;"                                       \
 799         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 800
 801 #define CONFIG_BOOTCOMMAND              CONFIG_RAMBOOTCOMMAND
 802
 803 #endif