include/configs/P1022DS.h

   1 /*
   2  * Copyright 2010-2012 Freescale Semiconductor, Inc.
   3  * Authors: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
   4  *          Timur Tabi <timur@freescale.com>
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 #include "../board/freescale/common/ics307_clk.h"
  13
  14 #ifdef CONFIG_SDCARD
  15 #define CONFIG_SPL_MMC_MINIMAL
  16 #define CONFIG_SPL_FLUSH_IMAGE
  17 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  18 #define CONFIG_SYS_TEXT_BASE            0x11001000
  19 #define CONFIG_SPL_TEXT_BASE            0xf8f81000
  20 #define CONFIG_SPL_PAD_TO               0x20000
  21 #define CONFIG_SPL_MAX_SIZE             (128 * 1024)
  22 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
  23 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x11000000)
  24 #define CONFIG_SYS_MMC_U_BOOT_START     (0x11000000)
  25 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (128 << 10)
  26 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  27 #define CONFIG_SYS_LDSCRIPT             "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  28 #define CONFIG_SPL_MMC_BOOT
  29 #ifdef CONFIG_SPL_BUILD
  30 #define CONFIG_SPL_COMMON_INIT_DDR
  31 #endif
  32 #endif
  33
  34 #ifdef CONFIG_SPIFLASH
  35 #define CONFIG_SPL_SPI_FLASH_MINIMAL
  36 #define CONFIG_SPL_FLUSH_IMAGE
  37 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  38 #define CONFIG_SYS_TEXT_BASE            0x11001000
  39 #define CONFIG_SPL_TEXT_BASE            0xf8f81000
  40 #define CONFIG_SPL_PAD_TO               0x20000
  41 #define CONFIG_SPL_MAX_SIZE             (128 * 1024)
  42 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (768 << 10)
  43 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x11000000)
  44 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x11000000)
  45 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (128 << 10)
  46 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  47 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  48 #define CONFIG_SPL_SPI_BOOT
  49 #ifdef CONFIG_SPL_BUILD
  50 #define CONFIG_SPL_COMMON_INIT_DDR
  51 #endif
  52 #endif
  53
  54 #define CONFIG_NAND_FSL_ELBC
  55 #define CONFIG_SYS_NAND_MAX_ECCPOS      56
  56 #define CONFIG_SYS_NAND_MAX_OOBFREE     5
  57
  58 #ifdef CONFIG_NAND
  59 #ifdef CONFIG_TPL_BUILD
  60 #define CONFIG_SPL_NAND_BOOT
  61 #define CONFIG_SPL_FLUSH_IMAGE
  62 #define CONFIG_SPL_NAND_INIT
  63 #define CONFIG_SPL_COMMON_INIT_DDR
  64 #define CONFIG_SPL_MAX_SIZE             (128 << 10)
  65 #define CONFIG_SPL_TEXT_BASE            0xf8f81000
  66 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  67 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (832 << 10)
  68 #define CONFIG_SYS_NAND_U_BOOT_DST      (0x11000000)
  69 #define CONFIG_SYS_NAND_U_BOOT_START    (0x11000000)
  70 #define CONFIG_SYS_NAND_U_BOOT_OFFS     ((128 + 128) << 10)
  71 #elif defined(CONFIG_SPL_BUILD)
  72 #define CONFIG_SPL_INIT_MINIMAL
  73 #define CONFIG_SPL_FLUSH_IMAGE
  74 #define CONFIG_SPL_TEXT_BASE            0xff800000
  75 #define CONFIG_SPL_MAX_SIZE             4096
  76 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (128 << 10)
  77 #define CONFIG_SYS_NAND_U_BOOT_DST      0xf8f80000
  78 #define CONFIG_SYS_NAND_U_BOOT_START    0xf8f80000
  79 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (128 << 10)
  80 #endif
  81 #define CONFIG_SPL_PAD_TO               0x20000
  82 #define CONFIG_TPL_PAD_TO               0x20000
  83 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  84 #define CONFIG_SYS_TEXT_BASE            0x11001000
  85 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  86 #endif
  87
  88 /* High Level Configuration Options */
  89 #define CONFIG_MP                       /* support multiple processors */
  90
  91 #ifndef CONFIG_SYS_TEXT_BASE
  92 #define CONFIG_SYS_TEXT_BASE    0xeff40000
  93 #endif
  94
  95 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  96 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  97 #endif
  98
  99 #define CONFIG_FSL_ELBC                 /* Has Enhanced localbus controller */
 100 #define CONFIG_PCIE1                    /* PCIE controller 1 (slot 1) */
 101 #define CONFIG_PCIE2                    /* PCIE controller 2 (slot 2) */
 102 #define CONFIG_PCIE3                    /* PCIE controller 3 (ULI bridge) */
 103 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
 104 #define CONFIG_FSL_PCIE_RESET           /* need PCIe reset errata */
 105 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
 106
 107 #define CONFIG_ENABLE_36BIT_PHYS
 108
 109 #ifdef CONFIG_PHYS_64BIT
 110 #define CONFIG_ADDR_MAP
 111 #define CONFIG_SYS_NUM_ADDR_MAP         16      /* number of TLB1 entries */
 112 #endif
 113
 114 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk()
 115 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk()
 116 #define CONFIG_ICS307_REFCLK_HZ 33333000  /* ICS307 clock chip ref freq */
 117
 118 /*
 119  * These can be toggled for performance analysis, otherwise use default.
 120  */
 121 #define CONFIG_L2_CACHE
 122 #define CONFIG_BTB
 123
 124 #define CONFIG_SYS_MEMTEST_START        0x00000000
 125 #define CONFIG_SYS_MEMTEST_END          0x7fffffff
 126
 127 #define CONFIG_SYS_CCSRBAR              0xffe00000
 128 #define CONFIG_SYS_CCSRBAR_PHYS_LOW     CONFIG_SYS_CCSRBAR
 129
 130 /* IN case of NAND bootloader relocate CCSRBAR in RAMboot code not in the 4k
 131        SPL code*/
 132 #ifdef CONFIG_SPL_BUILD
 133 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
 134 #endif
 135
 136 /* DDR Setup */
 137 #define CONFIG_DDR_SPD
 138 #define CONFIG_VERY_BIG_RAM
 139 #define CONFIG_SYS_FSL_DDR3
 140
 141 #ifdef CONFIG_DDR_ECC
 142 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 143 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 144 #endif
 145
 146 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 147 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 148
 149 #define CONFIG_NUM_DDR_CONTROLLERS      1
 150 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 151 #define CONFIG_CHIP_SELECTS_PER_CTRL    (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
 152
 153 /* I2C addresses of SPD EEPROMs */
 154 #define CONFIG_SYS_SPD_BUS_NUM          1
 155 #define SPD_EEPROM_ADDRESS              0x51    /* CTLR 0 DIMM 0 */
 156
 157 /* These are used when DDR doesn't use SPD.  */
 158 #define CONFIG_SYS_SDRAM_SIZE           2048
 159 #define CONFIG_SYS_SDRAM_SIZE_LAW       LAW_SIZE_2G
 160 #define CONFIG_SYS_DDR_CS0_BNDS         0x0000003F
 161 #define CONFIG_SYS_DDR_CS0_CONFIG       0x80014202
 162 #define CONFIG_SYS_DDR_CS1_BNDS         0x0040007F
 163 #define CONFIG_SYS_DDR_CS1_CONFIG       0x80014202
 164 #define CONFIG_SYS_DDR_TIMING_3         0x00010000
 165 #define CONFIG_SYS_DDR_TIMING_0         0x40110104
 166 #define CONFIG_SYS_DDR_TIMING_1         0x5c5bd746
 167 #define CONFIG_SYS_DDR_TIMING_2         0x0fa8d4ca
 168 #define CONFIG_SYS_DDR_MODE_1           0x00441221
 169 #define CONFIG_SYS_DDR_MODE_2           0x00000000
 170 #define CONFIG_SYS_DDR_INTERVAL         0x0a280100
 171 #define CONFIG_SYS_DDR_DATA_INIT        0xdeadbeef
 172 #define CONFIG_SYS_DDR_CLK_CTRL         0x02800000
 173 #define CONFIG_SYS_DDR_CONTROL          0xc7000008
 174 #define CONFIG_SYS_DDR_CONTROL_2        0x24401041
 175 #define CONFIG_SYS_DDR_TIMING_4         0x00220001
 176 #define CONFIG_SYS_DDR_TIMING_5         0x02401400
 177 #define CONFIG_SYS_DDR_ZQ_CONTROL       0x89080600
 178 #define CONFIG_SYS_DDR_WRLVL_CONTROL    0x8675f608
 179
 180 /*
 181  * Memory map
 182  *
 183  * 0x0000_0000  0x7fff_ffff     DDR                     2G Cacheable
 184  * 0x8000_0000  0xdfff_ffff     PCI Express Mem         1.5G non-cacheable
 185  * 0xffc0_0000  0xffc2_ffff     PCI IO range            192K non-cacheable
 186  *
 187  * Localbus cacheable (TBD)
 188  * 0xXXXX_XXXX  0xXXXX_XXXX     SRAM                    YZ M Cacheable
 189  *
 190  * Localbus non-cacheable
 191  * 0xe000_0000  0xe80f_ffff     Promjet/free            128M non-cacheable
 192  * 0xe800_0000  0xefff_ffff     FLASH                   128M non-cacheable
 193  * 0xff80_0000  0xff80_7fff     NAND                    32K non-cacheable
 194  * 0xffdf_0000  0xffdf_7fff     PIXIS                   32K non-cacheable TLB0
 195  * 0xffd0_0000  0xffd0_3fff     L1 for stack            16K Cacheable TLB0
 196  * 0xffe0_0000  0xffef_ffff     CCSR                    1M non-cacheable
 197  */
 198
 199 /*
 200  * Local Bus Definitions
 201  */
 202 #define CONFIG_SYS_FLASH_BASE           0xe8000000 /* start of FLASH 128M */
 203 #ifdef CONFIG_PHYS_64BIT
 204 #define CONFIG_SYS_FLASH_BASE_PHYS      0xfe8000000ull
 205 #else
 206 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 207 #endif
 208
 209 #define CONFIG_FLASH_BR_PRELIM  \
 210         (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V)
 211 #define CONFIG_FLASH_OR_PRELIM  (OR_AM_128MB | 0xff7)
 212
 213 #ifdef CONFIG_NAND
 214 #define CONFIG_SYS_BR1_PRELIM   CONFIG_FLASH_BR_PRELIM  /* NOR Base Address */
 215 #define CONFIG_SYS_OR1_PRELIM   CONFIG_FLASH_OR_PRELIM  /* NOR Options */
 216 #else
 217 #define CONFIG_SYS_BR0_PRELIM   CONFIG_FLASH_BR_PRELIM  /* NOR Base Address */
 218 #define CONFIG_SYS_OR0_PRELIM   CONFIG_FLASH_OR_PRELIM  /* NOR Options */
 219 #endif
 220
 221 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 222 #define CONFIG_SYS_FLASH_QUIET_TEST
 223 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 224
 225 #define CONFIG_SYS_MAX_FLASH_BANKS      1
 226 #define CONFIG_SYS_MAX_FLASH_SECT       1024
 227
 228 #ifndef CONFIG_SYS_MONITOR_BASE
 229 #ifdef CONFIG_SPL_BUILD
 230 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SPL_TEXT_BASE
 231 #else
 232 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE    /* start of monitor */
 233 #endif
 234 #endif
 235
 236 #define CONFIG_FLASH_CFI_DRIVER
 237 #define CONFIG_SYS_FLASH_CFI
 238 #define CONFIG_SYS_FLASH_EMPTY_INFO
 239
 240 /* Nand Flash */
 241 #if defined(CONFIG_NAND_FSL_ELBC)
 242 #define CONFIG_SYS_NAND_BASE            0xff800000
 243 #ifdef CONFIG_PHYS_64BIT
 244 #define CONFIG_SYS_NAND_BASE_PHYS       0xfff800000ull
 245 #else
 246 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 247 #endif
 248
 249 #define CONFIG_SYS_NAND_BASE_LIST       {CONFIG_SYS_NAND_BASE}
 250 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 251 #define CONFIG_CMD_NAND                 1
 252 #define CONFIG_SYS_NAND_BLOCK_SIZE      (256 * 1024)
 253 #define CONFIG_ELBC_NAND_SPL_STATIC_PGSIZE
 254
 255 /* NAND flash config */
 256 #define CONFIG_SYS_NAND_BR_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 257                                | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 258                                | BR_PS_8               /* Port Size = 8 bit */ \
 259                                | BR_MS_FCM             /* MSEL = FCM */ \
 260                                | BR_V)                 /* valid */
 261 #define CONFIG_SYS_NAND_OR_PRELIM  (OR_AM_32KB         /* length 256K */ \
 262                                | OR_FCM_PGS            /* Large Page*/ \
 263                                | OR_FCM_CSCT \
 264                                | OR_FCM_CST \
 265                                | OR_FCM_CHT \
 266                                | OR_FCM_SCY_1 \
 267                                | OR_FCM_TRLX \
 268                                | OR_FCM_EHTR)
 269 #ifdef CONFIG_NAND
 270 #define CONFIG_SYS_BR0_PRELIM   CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 271 #define CONFIG_SYS_OR0_PRELIM   CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 272 #else
 273 #define CONFIG_SYS_BR1_PRELIM   CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 274 #define CONFIG_SYS_OR1_PRELIM   CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 275 #endif
 276
 277 #endif /* CONFIG_NAND_FSL_ELBC */
 278
 279 #define CONFIG_BOARD_EARLY_INIT_F
 280 #define CONFIG_BOARD_EARLY_INIT_R
 281 #define CONFIG_MISC_INIT_R
 282 #define CONFIG_HWCONFIG
 283
 284 #define CONFIG_FSL_NGPIXIS
 285 #define PIXIS_BASE              0xffdf0000      /* PIXIS registers */
 286 #ifdef CONFIG_PHYS_64BIT
 287 #define PIXIS_BASE_PHYS         0xfffdf0000ull
 288 #else
 289 #define PIXIS_BASE_PHYS         PIXIS_BASE
 290 #endif
 291
 292 #define CONFIG_SYS_BR2_PRELIM   (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V)
 293 #define CONFIG_SYS_OR2_PRELIM   (OR_AM_32KB | 0x6ff7)
 294
 295 #define PIXIS_LBMAP_SWITCH      7
 296 #define PIXIS_LBMAP_MASK        0xF0
 297 #define PIXIS_LBMAP_ALTBANK     0x20
 298 #define PIXIS_SPD               0x07
 299 #define PIXIS_SPD_SYSCLK_MASK   0x07
 300 #define PIXIS_ELBC_SPI_MASK     0xc0
 301 #define PIXIS_SPI               0x80
 302
 303 #define CONFIG_SYS_INIT_RAM_LOCK
 304 #define CONFIG_SYS_INIT_RAM_ADDR        0xffd00000 /* Initial L1 address */
 305 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000 /* Size of used area in RAM */
 306
 307 #define CONFIG_SYS_GBL_DATA_OFFSET      \
 308         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 309 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 310
 311 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 312 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
 313
 314 /*
 315  * Config the L2 Cache as L2 SRAM
 316 */
 317 #if defined(CONFIG_SPL_BUILD)
 318 #if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH)
 319 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000
 320 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 321 #define CONFIG_SYS_L2_SIZE              (256 << 10)
 322 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 323 #define CONFIG_SPL_RELOC_TEXT_BASE      0xf8f81000
 324 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SYS_INIT_L2_ADDR + 116 * 1024)
 325 #define CONFIG_SPL_RELOC_STACK_SIZE     (32 << 10)
 326 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SYS_INIT_L2_ADDR + 148 * 1024)
 327 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (108 << 10)
 328 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024)
 329 #elif defined(CONFIG_NAND)
 330 #ifdef CONFIG_TPL_BUILD
 331 #define CONFIG_SYS_INIT_L2_ADDR         0xf8f80000
 332 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 333 #define CONFIG_SYS_L2_SIZE              (256 << 10)
 334 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 335 #define CONFIG_SPL_RELOC_TEXT_BASE      0xf8f81000
 336 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024)
 337 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024)
 338 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (48 << 10)
 339 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024)
 340 #else
 341 #define CONFIG_SYS_INIT_L2_ADDR         0xf8f80000
 342 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 343 #define CONFIG_SYS_L2_SIZE              (256 << 10)
 344 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 345 #define CONFIG_SPL_RELOC_TEXT_BASE      (CONFIG_SYS_INIT_L2_END - 0x2000)
 346 #define CONFIG_SPL_RELOC_STACK          ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF)
 347 #endif
 348 #endif
 349 #endif
 350
 351 /*
 352  * Serial Port
 353  */
 354 #define CONFIG_CONS_INDEX               1
 355 #define CONFIG_SYS_NS16550_SERIAL
 356 #define CONFIG_SYS_NS16550_REG_SIZE     1
 357 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 358 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL)
 359 #define CONFIG_NS16550_MIN_FUNCTIONS
 360 #endif
 361
 362 #define CONFIG_SYS_BAUDRATE_TABLE       \
 363         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 364
 365 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
 366 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
 367
 368 /* Video */
 369
 370 #ifdef CONFIG_FSL_DIU_FB
 371 #define CONFIG_SYS_DIU_ADDR     (CONFIG_SYS_CCSRBAR + 0x10000)
 372 #define CONFIG_CMD_BMP
 373 #define CONFIG_VIDEO_LOGO
 374 #define CONFIG_VIDEO_BMP_LOGO
 375 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
 376 /*
 377  * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so
 378  * disable empty flash sector detection, which is I/O-intensive.
 379  */
 380 #undef CONFIG_SYS_FLASH_EMPTY_INFO
 381 #endif
 382
 383 #ifndef CONFIG_FSL_DIU_FB
 384 #endif
 385
 386 #ifdef CONFIG_ATI
 387 #define VIDEO_IO_OFFSET         CONFIG_SYS_PCIE1_IO_VIRT
 388 #define CONFIG_BIOSEMU
 389 #define CONFIG_ATI_RADEON_FB
 390 #define CONFIG_VIDEO_LOGO
 391 #define CONFIG_SYS_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET
 392 #endif
 393
 394 /* I2C */
 395 #define CONFIG_SYS_I2C
 396 #define CONFIG_SYS_I2C_FSL
 397 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 398 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 399 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 400 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 401 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 402 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x3100
 403 #define CONFIG_SYS_I2C_NOPROBES         {{0, 0x29}}
 404
 405 /*
 406  * I2C2 EEPROM
 407  */
 408 #define CONFIG_ID_EEPROM
 409 #define CONFIG_SYS_I2C_EEPROM_NXID
 410 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 411 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 412 #define CONFIG_SYS_EEPROM_BUS_NUM       1
 413
 414 /*
 415  * eSPI - Enhanced SPI
 416  */
 417
 418 #define CONFIG_HARD_SPI
 419
 420 #define CONFIG_SF_DEFAULT_SPEED         10000000
 421 #define CONFIG_SF_DEFAULT_MODE          0
 422
 423 /*
 424  * General PCI
 425  * Memory space is mapped 1-1, but I/O space must start from 0.
 426  */
 427
 428 /* controller 1, Slot 2, tgtid 1, Base address a000 */
 429 #define CONFIG_SYS_PCIE1_MEM_VIRT       0xc0000000
 430 #ifdef CONFIG_PHYS_64BIT
 431 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 432 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc40000000ull
 433 #else
 434 #define CONFIG_SYS_PCIE1_MEM_BUS        0xc0000000
 435 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc0000000
 436 #endif
 437 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 438 #define CONFIG_SYS_PCIE1_IO_VIRT        0xffc20000
 439 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 440 #ifdef CONFIG_PHYS_64BIT
 441 #define CONFIG_SYS_PCIE1_IO_PHYS        0xfffc20000ull
 442 #else
 443 #define CONFIG_SYS_PCIE1_IO_PHYS        0xffc20000
 444 #endif
 445 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 446
 447 /* controller 2, direct to uli, tgtid 2, Base address 9000 */
 448 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 449 #ifdef CONFIG_PHYS_64BIT
 450 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 451 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 452 #else
 453 #define CONFIG_SYS_PCIE2_MEM_BUS        0xa0000000
 454 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xa0000000
 455 #endif
 456 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 457 #define CONFIG_SYS_PCIE2_IO_VIRT        0xffc10000
 458 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 459 #ifdef CONFIG_PHYS_64BIT
 460 #define CONFIG_SYS_PCIE2_IO_PHYS        0xfffc10000ull
 461 #else
 462 #define CONFIG_SYS_PCIE2_IO_PHYS        0xffc10000
 463 #endif
 464 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 465
 466 /* controller 3, Slot 1, tgtid 3, Base address b000 */
 467 #define CONFIG_SYS_PCIE3_MEM_VIRT       0x80000000
 468 #ifdef CONFIG_PHYS_64BIT
 469 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 470 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc00000000ull
 471 #else
 472 #define CONFIG_SYS_PCIE3_MEM_BUS        0x80000000
 473 #define CONFIG_SYS_PCIE3_MEM_PHYS       0x80000000
 474 #endif
 475 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
 476 #define CONFIG_SYS_PCIE3_IO_VIRT        0xffc00000
 477 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 478 #ifdef CONFIG_PHYS_64BIT
 479 #define CONFIG_SYS_PCIE3_IO_PHYS        0xfffc00000ull
 480 #else
 481 #define CONFIG_SYS_PCIE3_IO_PHYS        0xffc00000
 482 #endif
 483 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 484
 485 #ifdef CONFIG_PCI
 486 #define CONFIG_PCI_INDIRECT_BRIDGE
 487 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 488 #endif
 489
 490 /* SATA */
 491 #define CONFIG_LIBATA
 492 #define CONFIG_FSL_SATA
 493 #define CONFIG_FSL_SATA_V2
 494
 495 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 496 #define CONFIG_SATA1
 497 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 498 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 499 #define CONFIG_SATA2
 500 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 501 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 502
 503 #ifdef CONFIG_FSL_SATA
 504 #define CONFIG_LBA48
 505 #define CONFIG_CMD_SATA
 506 #define CONFIG_DOS_PARTITION
 507 #endif
 508
 509 #ifdef CONFIG_MMC
 510 #define CONFIG_FSL_ESDHC
 511 #define CONFIG_GENERIC_MMC
 512 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 513 #endif
 514
 515 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI)
 516 #define CONFIG_DOS_PARTITION
 517 #endif
 518
 519 #define CONFIG_TSEC_ENET
 520 #ifdef CONFIG_TSEC_ENET
 521
 522 #define CONFIG_TSECV2
 523
 524 #define CONFIG_MII                      /* MII PHY management */
 525 #define CONFIG_TSEC1            1
 526 #define CONFIG_TSEC1_NAME       "eTSEC1"
 527 #define CONFIG_TSEC2            1
 528 #define CONFIG_TSEC2_NAME       "eTSEC2"
 529
 530 #define TSEC1_PHY_ADDR          1
 531 #define TSEC2_PHY_ADDR          2
 532
 533 #define TSEC1_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 534 #define TSEC2_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 535
 536 #define TSEC1_PHYIDX            0
 537 #define TSEC2_PHYIDX            0
 538
 539 #define CONFIG_ETHPRIME         "eTSEC1"
 540
 541 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 542 #endif
 543
 544 /*
 545  * Dynamic MTD Partition support with mtdparts
 546  */
 547 #define CONFIG_MTD_DEVICE
 548 #define CONFIG_MTD_PARTITIONS
 549 #define CONFIG_CMD_MTDPARTS
 550 #define CONFIG_FLASH_CFI_MTD
 551 #ifdef CONFIG_PHYS_64BIT
 552 #define MTDIDS_DEFAULT "nor0=fe8000000.nor"
 553 #define MTDPARTS_DEFAULT "mtdparts=fe8000000.nor:48m(ramdisk)," \
 554                         "14m(diagnostic),2m(dink),6m(kernel),58112k(fs)," \
 555                         "512k(dtb),768k(u-boot)"
 556 #else
 557 #define MTDIDS_DEFAULT "nor0=e8000000.nor"
 558 #define MTDPARTS_DEFAULT "mtdparts=e8000000.nor:48m(ramdisk)," \
 559                         "14m(diagnostic),2m(dink),6m(kernel),58112k(fs)," \
 560                         "512k(dtb),768k(u-boot)"
 561 #endif
 562
 563 /*
 564  * Environment
 565  */
 566 #ifdef CONFIG_SPIFLASH
 567 #define CONFIG_ENV_IS_IN_SPI_FLASH
 568 #define CONFIG_ENV_SPI_BUS      0
 569 #define CONFIG_ENV_SPI_CS       0
 570 #define CONFIG_ENV_SPI_MAX_HZ   10000000
 571 #define CONFIG_ENV_SPI_MODE     0
 572 #define CONFIG_ENV_SIZE         0x2000  /* 8KB */
 573 #define CONFIG_ENV_OFFSET       0x100000        /* 1MB */
 574 #define CONFIG_ENV_SECT_SIZE    0x10000
 575 #elif defined(CONFIG_SDCARD)
 576 #define CONFIG_ENV_IS_IN_MMC
 577 #define CONFIG_FSL_FIXED_MMC_LOCATION
 578 #define CONFIG_ENV_SIZE         0x2000
 579 #define CONFIG_SYS_MMC_ENV_DEV  0
 580 #elif defined(CONFIG_NAND)
 581 #ifdef CONFIG_TPL_BUILD
 582 #define CONFIG_ENV_SIZE         0x2000
 583 #define CONFIG_ENV_ADDR         (CONFIG_SYS_INIT_L2_ADDR + (160 << 10))
 584 #else
 585 #define CONFIG_ENV_SIZE         CONFIG_SYS_NAND_BLOCK_SIZE
 586 #endif
 587 #define CONFIG_ENV_IS_IN_NAND
 588 #define CONFIG_ENV_OFFSET       (1024 * 1024)
 589 #define CONFIG_ENV_RANGE        (3 * CONFIG_ENV_SIZE)
 590 #elif defined(CONFIG_SYS_RAMBOOT)
 591 #define CONFIG_ENV_IS_NOWHERE   /* Store ENV in memory only */
 592 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - 0x1000)
 593 #define CONFIG_ENV_SIZE         0x2000
 594 #else
 595 #define CONFIG_ENV_IS_IN_FLASH
 596 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 597 #define CONFIG_ENV_SIZE         0x2000
 598 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 599 #endif
 600
 601 #define CONFIG_LOADS_ECHO
 602 #define CONFIG_SYS_LOADS_BAUD_CHANGE
 603
 604 /*
 605  * Command line configuration.
 606  */
 607 #define CONFIG_CMD_ERRATA
 608 #define CONFIG_CMD_IRQ
 609 #define CONFIG_CMD_REGINFO
 610
 611 #ifdef CONFIG_PCI
 612 #define CONFIG_CMD_PCI
 613 #endif
 614
 615 /*
 616  * USB
 617  */
 618 #define CONFIG_HAS_FSL_DR_USB
 619 #ifdef CONFIG_HAS_FSL_DR_USB
 620 #define CONFIG_USB_EHCI
 621
 622 #ifdef CONFIG_USB_EHCI
 623 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 624 #define CONFIG_USB_EHCI_FSL
 625 #endif
 626 #endif
 627
 628 /*
 629  * Miscellaneous configurable options
 630  */
 631 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 632 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 633 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 634 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 635 #ifdef CONFIG_CMD_KGDB
 636 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 637 #else
 638 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 639 #endif
 640 /* Print Buffer Size */
 641 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 642 #define CONFIG_SYS_MAXARGS      16
 643 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
 644
 645 /*
 646  * For booting Linux, the board info and command line data
 647  * have to be in the first 64 MB of memory, since this is
 648  * the maximum mapped by the Linux kernel during initialization.
 649  */
 650 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial Memory map for Linux*/
 651 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 652
 653 #ifdef CONFIG_CMD_KGDB
 654 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 655 #endif
 656
 657 /*
 658  * Environment Configuration
 659  */
 660
 661 #define CONFIG_HOSTNAME         p1022ds
 662 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 663 #define CONFIG_BOOTFILE         "uImage"
 664 #define CONFIG_UBOOTPATH        u-boot.bin      /* U-Boot image on TFTP server */
 665
 666 #define CONFIG_LOADADDR         1000000
 667
 668
 669 #define CONFIG_BAUDRATE 115200
 670
 671 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 672         "netdev=eth0\0"                                         \
 673         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 674         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 675         "tftpflash=tftpboot $loadaddr $uboot && "               \
 676                 "protect off $ubootaddr +$filesize && "         \
 677                 "erase $ubootaddr +$filesize && "               \
 678                 "cp.b $loadaddr $ubootaddr $filesize && "       \
 679                 "protect on $ubootaddr +$filesize && "          \
 680                 "cmp.b $loadaddr $ubootaddr $filesize\0"        \
 681         "consoledev=ttyS0\0"                                    \
 682         "ramdiskaddr=2000000\0"                                 \
 683         "ramdiskfile=rootfs.ext2.gz.uboot\0"                    \
 684         "fdtaddr=1e00000\0"                                     \
 685         "fdtfile=p1022ds.dtb\0"                                 \
 686         "bdev=sda3\0"                                           \
 687         "hwconfig=esdhc;audclk:12\0"
 688
 689 #define CONFIG_HDBOOT                                   \
 690         "setenv bootargs root=/dev/$bdev rw "           \
 691         "console=$consoledev,$baudrate $othbootargs $videobootargs;"    \
 692         "tftp $loadaddr $bootfile;"                     \
 693         "tftp $fdtaddr $fdtfile;"                       \
 694         "bootm $loadaddr - $fdtaddr"
 695
 696 #define CONFIG_NFSBOOTCOMMAND                                           \
 697         "setenv bootargs root=/dev/nfs rw "                             \
 698         "nfsroot=$serverip:$rootpath "                                  \
 699         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 700         "console=$consoledev,$baudrate $othbootargs $videobootargs;"    \
 701         "tftp $loadaddr $bootfile;"                                     \
 702         "tftp $fdtaddr $fdtfile;"                                       \
 703         "bootm $loadaddr - $fdtaddr"
 704
 705 #define CONFIG_RAMBOOTCOMMAND                                           \
 706         "setenv bootargs root=/dev/ram rw "                             \
 707         "console=$consoledev,$baudrate $othbootargs $videobootargs;"    \
 708         "tftp $ramdiskaddr $ramdiskfile;"                               \
 709         "tftp $loadaddr $bootfile;"                                     \
 710         "tftp $fdtaddr $fdtfile;"                                       \
 711         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 712
 713 #define CONFIG_BOOTCOMMAND              CONFIG_RAMBOOTCOMMAND
 714
 715 #endif