include/configs/P2041RDB.h

   1 /*
   2  * Copyright 2011-2012 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * P2041 RDB board configuration file
   9  * Also supports P2040 RDB
  10  */
  11 #ifndef __CONFIG_H
  12 #define __CONFIG_H
  13
  14 #define CONFIG_P2041RDB
  15 #define CONFIG_PHYS_64BIT
  16 #define CONFIG_SYS_GENERIC_BOARD
  17 #define CONFIG_DISPLAY_BOARDINFO
  18 #define CONFIG_PPC_P2041
  19
  20 #ifdef CONFIG_RAMBOOT_PBL
  21 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  22 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  23 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/corenet_ds/pbi.cfg
  24 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p2041rdb.cfg
  25 #endif
  26
  27 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
  28 /* Set 1M boot space */
  29 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
  30 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
  31                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
  32 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
  33 #define CONFIG_SYS_NO_FLASH
  34 #endif
  35
  36 /* High Level Configuration Options */
  37 #define CONFIG_BOOKE
  38 #define CONFIG_E500                     /* BOOKE e500 family */
  39 #define CONFIG_E500MC                   /* BOOKE e500mc family */
  40 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  41 #define CONFIG_MP                       /* support multiple processors */
  42
  43 #ifndef CONFIG_SYS_TEXT_BASE
  44 #define CONFIG_SYS_TEXT_BASE    0xeff40000
  45 #endif
  46
  47 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  48 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  49 #endif
  50
  51 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  52 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
  53 #define CONFIG_FSL_ELBC                 /* Has Enhanced localbus controller */
  54 #define CONFIG_FSL_CAAM                 /* Enable SEC/CAAM */
  55 #define CONFIG_PCI                      /* Enable PCI/PCIE */
  56 #define CONFIG_PCIE1                    /* PCIE controler 1 */
  57 #define CONFIG_PCIE2                    /* PCIE controler 2 */
  58 #define CONFIG_PCIE3                    /* PCIE controler 3 */
  59 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  60 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  61
  62 #define CONFIG_SYS_SRIO
  63 #define CONFIG_SRIO1                    /* SRIO port 1 */
  64 #define CONFIG_SRIO2                    /* SRIO port 2 */
  65 #define CONFIG_SRIO_PCIE_BOOT_MASTER
  66 #define CONFIG_SYS_DPAA_RMAN            /* RMan */
  67
  68 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  69
  70 #define CONFIG_ENV_OVERWRITE
  71
  72 #ifdef CONFIG_SYS_NO_FLASH
  73 #if !defined(CONFIG_RAMBOOT_PBL) && !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
  74 #define CONFIG_ENV_IS_NOWHERE
  75 #endif
  76 #else
  77 #define CONFIG_FLASH_CFI_DRIVER
  78 #define CONFIG_SYS_FLASH_CFI
  79 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
  80 #endif
  81
  82 #if defined(CONFIG_SPIFLASH)
  83         #define CONFIG_SYS_EXTRA_ENV_RELOC
  84         #define CONFIG_ENV_IS_IN_SPI_FLASH
  85         #define CONFIG_ENV_SPI_BUS              0
  86         #define CONFIG_ENV_SPI_CS               0
  87         #define CONFIG_ENV_SPI_MAX_HZ           10000000
  88         #define CONFIG_ENV_SPI_MODE             0
  89         #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
  90         #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
  91         #define CONFIG_ENV_SECT_SIZE            0x10000
  92 #elif defined(CONFIG_SDCARD)
  93         #define CONFIG_SYS_EXTRA_ENV_RELOC
  94         #define CONFIG_ENV_IS_IN_MMC
  95         #define CONFIG_FSL_FIXED_MMC_LOCATION
  96         #define CONFIG_SYS_MMC_ENV_DEV          0
  97         #define CONFIG_ENV_SIZE                 0x2000
  98         #define CONFIG_ENV_OFFSET               (512 * 1658)
  99 #elif defined(CONFIG_NAND)
 100 #define CONFIG_SYS_EXTRA_ENV_RELOC
 101 #define CONFIG_ENV_IS_IN_NAND
 102 #define CONFIG_ENV_SIZE                 CONFIG_SYS_NAND_BLOCK_SIZE
 103 #define CONFIG_ENV_OFFSET               (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
 104 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 105 #define CONFIG_ENV_IS_IN_REMOTE
 106 #define CONFIG_ENV_ADDR         0xffe20000
 107 #define CONFIG_ENV_SIZE         0x2000
 108 #elif defined(CONFIG_ENV_IS_NOWHERE)
 109 #define CONFIG_ENV_SIZE         0x2000
 110 #else
 111         #define CONFIG_ENV_IS_IN_FLASH
 112         #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE \
 113                         - CONFIG_ENV_SECT_SIZE)
 114         #define CONFIG_ENV_SIZE         0x2000
 115         #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 116 #endif
 117
 118 #ifndef __ASSEMBLY__
 119 unsigned long get_board_sys_clk(unsigned long dummy);
 120 #endif
 121 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk(0)
 122
 123 /*
 124  * These can be toggled for performance analysis, otherwise use default.
 125  */
 126 #define CONFIG_SYS_CACHE_STASHING
 127 #define CONFIG_BACKSIDE_L2_CACHE
 128 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
 129 #define CONFIG_BTB                      /* toggle branch predition */
 130
 131 #define CONFIG_ENABLE_36BIT_PHYS
 132
 133 #ifdef CONFIG_PHYS_64BIT
 134 #define CONFIG_ADDR_MAP
 135 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 136 #endif
 137
 138 #define CONFIG_POST CONFIG_SYS_POST_MEMORY      /* test POST memory test */
 139 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 140 #define CONFIG_SYS_MEMTEST_END          0x00400000
 141 #define CONFIG_SYS_ALT_MEMTEST
 142 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 143
 144 /*
 145  *  Config the L3 Cache as L3 SRAM
 146  */
 147 #define CONFIG_SYS_INIT_L3_ADDR         CONFIG_RAMBOOT_TEXT_BASE
 148 #ifdef CONFIG_PHYS_64BIT
 149 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    (0xf00000000ull | \
 150                 CONFIG_RAMBOOT_TEXT_BASE)
 151 #else
 152 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    CONFIG_SYS_INIT_L3_ADDR
 153 #endif
 154 #define CONFIG_SYS_L3_SIZE              (1024 << 10)
 155 #define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE)
 156
 157 #ifdef CONFIG_PHYS_64BIT
 158 #define CONFIG_SYS_DCSRBAR              0xf0000000
 159 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 160 #endif
 161
 162 /* EEPROM */
 163 #define CONFIG_ID_EEPROM
 164 #define CONFIG_SYS_I2C_EEPROM_NXID
 165 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 166 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50
 167 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 168
 169 /*
 170  * DDR Setup
 171  */
 172 #define CONFIG_VERY_BIG_RAM
 173 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 174 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 175
 176 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 177 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 178
 179 #define CONFIG_DDR_SPD
 180 #define CONFIG_SYS_FSL_DDR3
 181
 182 #define CONFIG_SYS_SPD_BUS_NUM  0
 183 #define SPD_EEPROM_ADDRESS      0x52
 184 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 185
 186 /*
 187  * Local Bus Definitions
 188  */
 189
 190 /* Set the local bus clock 1/8 of platform clock */
 191 #define CONFIG_SYS_LBC_LCRR             LCRR_CLKDIV_8
 192
 193 /*
 194  * This board doesn't have a promjet connector.
 195  * However, it uses commone corenet board LAW and TLB.
 196  * It is necessary to use the same start address with proper offset.
 197  */
 198 #define CONFIG_SYS_FLASH_BASE           0xe0000000
 199 #ifdef CONFIG_PHYS_64BIT
 200 #define CONFIG_SYS_FLASH_BASE_PHYS      0xfe0000000ull
 201 #else
 202 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 203 #endif
 204
 205 #define CONFIG_SYS_FLASH_BR_PRELIM \
 206                 (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000)) | \
 207                 BR_PS_16 | BR_V)
 208 #define CONFIG_SYS_FLASH_OR_PRELIM \
 209                 ((0xf8000ff7 & ~OR_GPCM_SCY & ~OR_GPCM_EHTR) \
 210                  | OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR)
 211
 212 #define CONFIG_FSL_CPLD
 213 #define CPLD_BASE               0xffdf0000      /* CPLD registers */
 214 #ifdef CONFIG_PHYS_64BIT
 215 #define CPLD_BASE_PHYS          0xfffdf0000ull
 216 #else
 217 #define CPLD_BASE_PHYS          CPLD_BASE
 218 #endif
 219
 220 #define CONFIG_SYS_BR3_PRELIM   (BR_PHYS_ADDR(CPLD_BASE_PHYS) | BR_PS_8 | BR_V)
 221 #define CONFIG_SYS_OR3_PRELIM   0xffffeff7      /* 32KB but only 4k mapped */
 222
 223 #define PIXIS_LBMAP_SWITCH      7
 224 #define PIXIS_LBMAP_MASK        0xf0
 225 #define PIXIS_LBMAP_SHIFT       4
 226 #define PIXIS_LBMAP_ALTBANK     0x40
 227
 228 #define CONFIG_SYS_FLASH_QUIET_TEST
 229 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 230
 231 #define CONFIG_SYS_MAX_FLASH_BANKS      1               /* number of banks */
 232 #define CONFIG_SYS_MAX_FLASH_SECT       1024            /* sectors per device */
 233 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000           /* Erase Timeout (ms) */
 234 #define CONFIG_SYS_FLASH_WRITE_TOUT     500             /* Write Timeout (ms) */
 235
 236 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 237
 238 #if defined(CONFIG_RAMBOOT_PBL)
 239 #define CONFIG_SYS_RAMBOOT
 240 #endif
 241
 242 #define CONFIG_NAND_FSL_ELBC
 243 /* Nand Flash */
 244 #ifdef CONFIG_NAND_FSL_ELBC
 245 #define CONFIG_SYS_NAND_BASE            0xffa00000
 246 #ifdef CONFIG_PHYS_64BIT
 247 #define CONFIG_SYS_NAND_BASE_PHYS       0xfffa00000ull
 248 #else
 249 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 250 #endif
 251
 252 #define CONFIG_SYS_NAND_BASE_LIST     {CONFIG_SYS_NAND_BASE}
 253 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 254 #define CONFIG_CMD_NAND
 255 #define CONFIG_SYS_NAND_BLOCK_SIZE    (128 * 1024)
 256
 257 /* NAND flash config */
 258 #define CONFIG_SYS_NAND_BR_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 259                                | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 260                                | BR_PS_8               /* Port Size = 8 bit */ \
 261                                | BR_MS_FCM             /* MSEL = FCM */ \
 262                                | BR_V)                 /* valid */
 263 #define CONFIG_SYS_NAND_OR_PRELIM  (0xFFFC0000        /* length 256K */ \
 264                                | OR_FCM_PGS            /* Large Page*/ \
 265                                | OR_FCM_CSCT \
 266                                | OR_FCM_CST \
 267                                | OR_FCM_CHT \
 268                                | OR_FCM_SCY_1 \
 269                                | OR_FCM_TRLX \
 270                                | OR_FCM_EHTR)
 271
 272 #ifdef CONFIG_NAND
 273 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 274 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 275 #define CONFIG_SYS_BR1_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
 276 #define CONFIG_SYS_OR1_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
 277 #else
 278 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
 279 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
 280 #define CONFIG_SYS_BR1_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 281 #define CONFIG_SYS_OR1_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 282 #endif
 283 #else
 284 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
 285 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
 286 #endif /* CONFIG_NAND_FSL_ELBC */
 287
 288 #define CONFIG_SYS_FLASH_EMPTY_INFO
 289 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7
 290 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000}
 291
 292 #define CONFIG_BOARD_EARLY_INIT_F
 293 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
 294 #define CONFIG_MISC_INIT_R
 295
 296 #define CONFIG_HWCONFIG
 297
 298 /* define to use L1 as initial stack */
 299 #define CONFIG_L1_INIT_RAM
 300 #define CONFIG_SYS_INIT_RAM_LOCK
 301 #define CONFIG_SYS_INIT_RAM_ADDR        0xffd00000      /* Initial L1 address */
 302 #ifdef CONFIG_PHYS_64BIT
 303 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
 304 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR
 305 /* The assembler doesn't like typecast */
 306 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 307         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 308           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 309 #else
 310 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   CONFIG_SYS_INIT_RAM_ADDR
 311 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 312 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 313 #endif
 314 #define CONFIG_SYS_INIT_RAM_SIZE        0x00004000
 315
 316 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 317                                         GENERATED_GBL_DATA_SIZE)
 318 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 319
 320 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 321 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)
 322
 323 /* Serial Port - controlled on board with jumper J8
 324  * open - index 2
 325  * shorted - index 1
 326  */
 327 #define CONFIG_CONS_INDEX       1
 328 #define CONFIG_SYS_NS16550
 329 #define CONFIG_SYS_NS16550_SERIAL
 330 #define CONFIG_SYS_NS16550_REG_SIZE     1
 331 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 332
 333 #define CONFIG_SYS_BAUDRATE_TABLE       \
 334         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 335
 336 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 337 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 338 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 339 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 340
 341 /* Use the HUSH parser */
 342 #define CONFIG_SYS_HUSH_PARSER
 343
 344 /* pass open firmware flat tree */
 345 #define CONFIG_OF_LIBFDT
 346 #define CONFIG_OF_BOARD_SETUP
 347 #define CONFIG_OF_STDOUT_VIA_ALIAS
 348
 349 /* new uImage format support */
 350 #define CONFIG_FIT
 351 #define CONFIG_FIT_VERBOSE      /* enable fit_format_{error,warning}() */
 352
 353 /* I2C */
 354 #define CONFIG_SYS_I2C
 355 #define CONFIG_SYS_I2C_FSL
 356 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 357 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 358 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 359 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 360 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 361 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 362
 363 /*
 364  * RapidIO
 365  */
 366 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xa0000000
 367 #ifdef CONFIG_PHYS_64BIT
 368 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc20000000ull
 369 #else
 370 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xa0000000
 371 #endif
 372 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x10000000      /* 256M */
 373
 374 #define CONFIG_SYS_SRIO2_MEM_VIRT       0xb0000000
 375 #ifdef CONFIG_PHYS_64BIT
 376 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xc30000000ull
 377 #else
 378 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xb0000000
 379 #endif
 380 #define CONFIG_SYS_SRIO2_MEM_SIZE       0x10000000      /* 256M */
 381
 382 /*
 383  * for slave u-boot IMAGE instored in master memory space,
 384  * PHYS must be aligned based on the SIZE
 385  */
 386 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
 387 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
 388 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000       /* 1M */
 389 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
 390 /*
 391  * for slave UCODE and ENV instored in master memory space,
 392  * PHYS must be aligned based on the SIZE
 393  */
 394 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
 395 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
 396 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000    /* 256K */
 397
 398 /* slave core release by master*/
 399 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
 400 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
 401
 402 /*
 403  * SRIO_PCIE_BOOT - SLAVE
 404  */
 405 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 406 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 407 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 408                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 409 #endif
 410
 411 /*
 412  * eSPI - Enhanced SPI
 413  */
 414 #define CONFIG_FSL_ESPI
 415 #define CONFIG_SPI_FLASH
 416 #define CONFIG_SPI_FLASH_SPANSION
 417 #define CONFIG_CMD_SF
 418 #define CONFIG_SF_DEFAULT_SPEED         10000000
 419 #define CONFIG_SF_DEFAULT_MODE          0
 420
 421 /*
 422  * General PCI
 423  * Memory space is mapped 1-1, but I/O space must start from 0.
 424  */
 425
 426 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 427 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 428 #ifdef CONFIG_PHYS_64BIT
 429 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 430 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 431 #else
 432 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 433 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 434 #endif
 435 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 436 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 437 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 438 #ifdef CONFIG_PHYS_64BIT
 439 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 440 #else
 441 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
 442 #endif
 443 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 444
 445 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 446 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 447 #ifdef CONFIG_PHYS_64BIT
 448 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 449 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 450 #else
 451 #define CONFIG_SYS_PCIE2_MEM_BUS        0xa0000000
 452 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xa0000000
 453 #endif
 454 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 455 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 456 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 457 #ifdef CONFIG_PHYS_64BIT
 458 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 459 #else
 460 #define CONFIG_SYS_PCIE2_IO_PHYS        0xf8010000
 461 #endif
 462 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 463
 464 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 465 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xc0000000
 466 #ifdef CONFIG_PHYS_64BIT
 467 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 468 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc40000000ull
 469 #else
 470 #define CONFIG_SYS_PCIE3_MEM_BUS        0xc0000000
 471 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc0000000
 472 #endif
 473 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
 474 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 475 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 476 #ifdef CONFIG_PHYS_64BIT
 477 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 478 #else
 479 #define CONFIG_SYS_PCIE3_IO_PHYS        0xf8020000
 480 #endif
 481 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 482
 483 /* Qman/Bman */
 484 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 485 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 486 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 487 #ifdef CONFIG_PHYS_64BIT
 488 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 489 #else
 490 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 491 #endif
 492 #define CONFIG_SYS_BMAN_MEM_SIZE        0x00200000
 493 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 494 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 495 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 496 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 497 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 498                                         CONFIG_SYS_BMAN_CENA_SIZE)
 499 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 500 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 501 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 502 #define CONFIG_SYS_QMAN_MEM_BASE        0xf4200000
 503 #ifdef CONFIG_PHYS_64BIT
 504 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff4200000ull
 505 #else
 506 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 507 #endif
 508 #define CONFIG_SYS_QMAN_MEM_SIZE        0x00200000
 509 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 510 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 511 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 512 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 513 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 514                                         CONFIG_SYS_QMAN_CENA_SIZE)
 515 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 516 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 517
 518 #define CONFIG_SYS_DPAA_FMAN
 519 #define CONFIG_SYS_DPAA_PME
 520 /* Default address of microcode for the Linux Fman driver */
 521 #if defined(CONFIG_SPIFLASH)
 522 /*
 523  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 524  * env, so we got 0x110000.
 525  */
 526 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 527 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 528 #elif defined(CONFIG_SDCARD)
 529 /*
 530  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 531  * about 825KB (1650 blocks), Env is stored after the image, and the env size is
 532  * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
 533  */
 534 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 535 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680)
 536 #elif defined(CONFIG_NAND)
 537 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 538 #define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE)
 539 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 540 /*
 541  * Slave has no ucode locally, it can fetch this from remote. When implementing
 542  * in two corenet boards, slave's ucode could be stored in master's memory
 543  * space, the address can be mapped from slave TLB->slave LAW->
 544  * slave SRIO or PCIE outbound window->master inbound window->
 545  * master LAW->the ucode address in master's memory space.
 546  */
 547 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 548 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000
 549 #else
 550 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 551 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000
 552 #endif
 553 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 554 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 555
 556 #ifdef CONFIG_SYS_DPAA_FMAN
 557 #define CONFIG_FMAN_ENET
 558 #define CONFIG_PHYLIB_10G
 559 #define CONFIG_PHY_VITESSE
 560 #define CONFIG_PHY_TERANETICS
 561 #endif
 562
 563 #ifdef CONFIG_PCI
 564 #define CONFIG_PCI_INDIRECT_BRIDGE
 565 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 566 #define CONFIG_E1000
 567
 568 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 569 #define CONFIG_DOS_PARTITION
 570 #endif  /* CONFIG_PCI */
 571
 572 /* SATA */
 573 #define CONFIG_FSL_SATA_V2
 574
 575 #ifdef CONFIG_FSL_SATA_V2
 576 #define CONFIG_FSL_SATA
 577 #define CONFIG_LIBATA
 578
 579 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 580 #define CONFIG_SATA1
 581 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 582 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 583 #define CONFIG_SATA2
 584 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 585 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 586
 587 #define CONFIG_LBA48
 588 #define CONFIG_CMD_SATA
 589 #define CONFIG_DOS_PARTITION
 590 #define CONFIG_CMD_EXT2
 591 #endif
 592
 593 #ifdef CONFIG_FMAN_ENET
 594 #define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR  0x2
 595 #define CONFIG_SYS_FM1_DTSEC2_PHY_ADDR  0x3
 596 #define CONFIG_SYS_FM1_DTSEC3_PHY_ADDR  0x4
 597 #define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR  0x1
 598 #define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR  0x0
 599
 600 #define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR    0x1c
 601 #define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR    0x1d
 602 #define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR    0x1e
 603 #define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR    0x1f
 604
 605 #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR  0
 606
 607 #define CONFIG_SYS_TBIPA_VALUE  8
 608 #define CONFIG_MII              /* MII PHY management */
 609 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 610 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 611 #endif
 612
 613 /*
 614  * Environment
 615  */
 616 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 617 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 618
 619 /*
 620  * Command line configuration.
 621  */
 622 #include <config_cmd_default.h>
 623
 624 #define CONFIG_CMD_DHCP
 625 #define CONFIG_CMD_ELF
 626 #define CONFIG_CMD_ERRATA
 627 #define CONFIG_CMD_GREPENV
 628 #define CONFIG_CMD_IRQ
 629 #define CONFIG_CMD_I2C
 630 #define CONFIG_CMD_MII
 631 #define CONFIG_CMD_PING
 632
 633 #ifdef CONFIG_PCI
 634 #define CONFIG_CMD_PCI
 635 #define CONFIG_CMD_NET
 636 #endif
 637
 638 /*
 639 * USB
 640 */
 641 #define CONFIG_HAS_FSL_DR_USB
 642 #define CONFIG_HAS_FSL_MPH_USB
 643
 644 #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
 645 #define CONFIG_CMD_USB
 646 #define CONFIG_USB_STORAGE
 647 #define CONFIG_USB_EHCI
 648 #define CONFIG_USB_EHCI_FSL
 649 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 650 #endif
 651
 652 #define CONFIG_CMD_EXT2
 653
 654 #define CONFIG_MMC
 655
 656 #ifdef CONFIG_MMC
 657 #define CONFIG_FSL_ESDHC
 658 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 659 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 660 #define CONFIG_CMD_MMC
 661 #define CONFIG_GENERIC_MMC
 662 #define CONFIG_CMD_EXT2
 663 #define CONFIG_CMD_FAT
 664 #define CONFIG_DOS_PARTITION
 665 #endif
 666
 667 /* Hash command with SHA acceleration supported in hardware */
 668 #ifdef CONFIG_FSL_CAAM
 669 #define CONFIG_CMD_HASH
 670 #define CONFIG_SHA_HW_ACCEL
 671 #endif
 672
 673 /*
 674  * Miscellaneous configurable options
 675  */
 676 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 677 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 678 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 679 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 680 #ifdef CONFIG_CMD_KGDB
 681 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 682 #else
 683 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 684 #endif
 685 /* Print Buffer Size */
 686 #define CONFIG_SYS_PBSIZE       (CONFIG_SYS_CBSIZE + \
 687                                 sizeof(CONFIG_SYS_PROMPT)+16)
 688 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 689 /* Boot Argument Buffer Size */
 690 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
 691
 692 /*
 693  * For booting Linux, the board info and command line data
 694  * have to be in the first 64 MB of memory, since this is
 695  * the maximum mapped by the Linux kernel during initialization.
 696  */
 697 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial Memory for Linux */
 698 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 699
 700 #ifdef CONFIG_CMD_KGDB
 701 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 702 #endif
 703
 704 /*
 705  * Environment Configuration
 706  */
 707 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 708 #define CONFIG_BOOTFILE         "uImage"
 709 #define CONFIG_UBOOTPATH        u-boot.bin
 710
 711 /* default location for tftp and bootm */
 712 #define CONFIG_LOADADDR         1000000
 713
 714 #define CONFIG_BOOTDELAY        10      /* -1 disables auto-boot */
 715
 716 #define CONFIG_BAUDRATE 115200
 717
 718 #define __USB_PHY_TYPE  utmi
 719
 720 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 721         "hwconfig=fsl_ddr:ctlr_intlv=cacheline,"                \
 722         "bank_intlv=cs0_cs1\0"                                  \
 723         "netdev=eth0\0"                                         \
 724         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"                     \
 725         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"             \
 726         "tftpflash=tftpboot $loadaddr $uboot && "               \
 727         "protect off $ubootaddr +$filesize && "                 \
 728         "erase $ubootaddr +$filesize && "                       \
 729         "cp.b $loadaddr $ubootaddr $filesize && "               \
 730         "protect on $ubootaddr +$filesize && "                  \
 731         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 732         "consoledev=ttyS0\0"                                    \
 733         "usb_phy_type=" __stringify(__USB_PHY_TYPE) "\0"                \
 734         "usb_dr_mode=host\0"                                    \
 735         "ramdiskaddr=2000000\0"                                 \
 736         "ramdiskfile=p2041rdb/ramdisk.uboot\0"                  \
 737         "fdtaddr=c00000\0"                                      \
 738         "fdtfile=p2041rdb/p2041rdb.dtb\0"                       \
 739         "bdev=sda3\0"
 740
 741 #define CONFIG_HDBOOT                                   \
 742         "setenv bootargs root=/dev/$bdev rw "           \
 743         "console=$consoledev,$baudrate $othbootargs;"   \
 744         "tftp $loadaddr $bootfile;"                     \
 745         "tftp $fdtaddr $fdtfile;"                       \
 746         "bootm $loadaddr - $fdtaddr"
 747
 748 #define CONFIG_NFSBOOTCOMMAND                   \
 749         "setenv bootargs root=/dev/nfs rw "     \
 750         "nfsroot=$serverip:$rootpath "          \
 751         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 752         "console=$consoledev,$baudrate $othbootargs;"   \
 753         "tftp $loadaddr $bootfile;"             \
 754         "tftp $fdtaddr $fdtfile;"               \
 755         "bootm $loadaddr - $fdtaddr"
 756
 757 #define CONFIG_RAMBOOTCOMMAND                           \
 758         "setenv bootargs root=/dev/ram rw "             \
 759         "console=$consoledev,$baudrate $othbootargs;"   \
 760         "tftp $ramdiskaddr $ramdiskfile;"               \
 761         "tftp $loadaddr $bootfile;"                     \
 762         "tftp $fdtaddr $fdtfile;"                       \
 763         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 764
 765 #define CONFIG_BOOTCOMMAND              CONFIG_HDBOOT
 766
 767 #include <asm/fsl_secure_boot.h>
 768
 769 #ifdef CONFIG_SECURE_BOOT
 770 #define CONFIG_CMD_BLOB
 771 #endif
 772
 773 #endif  /* __CONFIG_H */