include/configs/QS823.h

   1 /*
   2  * (C) Copyright 2003
   3  * MuLogic B.V.
   4  *
   5  * (C) Copyright 2002
   6  * Simple Network Magic Corporation
   7  *
   8  * (C) Copyright 2000
   9  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  10  *
  11  * SPDX-License-Identifier:     GPL-2.0+
  12  */
  13
  14 /*
  15  * board/config.h - configuration options, board specific
  16  */
  17
  18 #ifndef __CONFIG_H
  19 #define __CONFIG_H
  20
  21 /* various debug settings */
  22 #undef CONFIG_SYS_DEVICE_NULLDEV                /* null device */
  23 #undef CONFIG_SILENT_CONSOLE            /* silent console */
  24 #undef CONFIG_SYS_CONSOLE_INFO_QUIET            /* silent console ? */
  25 #undef DEBUG_FLASH                      /* debug flash code */
  26 #undef FLASH_DEBUG                      /* debug fash code */
  27 #undef DEBUG_ENV                        /* debug environment code */
  28
  29 #define CONFIG_SYS_DIRECT_FLASH_TFTP    1       /* allow direct tftp to flash */
  30 #define CONFIG_ENV_OVERWRITE    1       /* allow overwrite MAC address */
  31
  32 /*
  33  * High Level Configuration Options
  34  * (easy to change)
  35  */
  36 #define CONFIG_MPC823           1       /* This is a MPC823 CPU */
  37 #define CONFIG_QS823            1       /* ...on a QS823 module */
  38 #define CONFIG_SCC2_ENET        1       /* SCC2 10BaseT ethernet */
  39
  40 #define CONFIG_SYS_TEXT_BASE    0xFFF00000
  41
  42 /* Select the target clock speed */
  43 #undef CONFIG_CLOCK_16MHZ               /* cpu=16,777,216 Hz, mem=16Mhz */
  44 #undef CONFIG_CLOCK_33MHZ               /* cpu=33,554,432 Hz, mem=33Mhz */
  45 #undef CONFIG_CLOCK_50MHZ               /* cpu=49,971,200 Hz, mem=33Mhz */
  46 #define CONFIG_CLOCK_66MHZ      1       /* cpu=67,108,864 Hz, mem=66Mhz */
  47 #undef CONFIG_CLOCK_80MHZ               /* cpu=79,986,688 Hz, mem=33Mhz */
  48
  49 #ifdef CONFIG_CLOCK_16MHZ
  50 #define CONFIG_CLOCK_MULT       512
  51 #endif
  52
  53 #ifdef CONFIG_CLOCK_33MHZ
  54 #define CONFIG_CLOCK_MULT       1024
  55 #endif
  56
  57 #ifdef CONFIG_CLOCK_50MHZ
  58 #define CONFIG_CLOCK_MULT       1525
  59 #endif
  60
  61 #ifdef CONFIG_CLOCK_66MHZ
  62 #define CONFIG_CLOCK_MULT       2048
  63 #endif
  64
  65 #ifdef CONFIG_CLOCK_80MHZ
  66 #define CONFIG_CLOCK_MULT       2441
  67 #endif
  68
  69 /* choose flash size, 4Mb or 8Mb */
  70 #define CONFIG_FLASH_4MB        1       /* board has 4Mb flash */
  71 #undef CONFIG_FLASH_8MB                 /* board has 8Mb flash */
  72
  73 #define CONFIG_CLOCK_BASE       32768   /* Base clock input freq */
  74
  75 #undef CONFIG_8xx_CONS_SMC1
  76 #define CONFIG_8xx_CONS_SMC2    1       /* Console is on SMC2 */
  77 #undef CONFIG_8xx_CONS_NONE
  78
  79 #define CONFIG_BAUDRATE         38400   /* console baudrate = 38.4kbps */
  80
  81 #undef CONFIG_CLOCKS_IN_MHZ             /* clocks passsed to Linux in MHz */
  82
  83 /* Define default IP addresses */
  84 #define CONFIG_IPADDR           192.168.1.99    /* own ip address */
  85 #define CONFIG_SERVERIP         192.168.1.19    /* used for tftp (not nfs?) */
  86
  87 /* message to say directly after booting */
  88 #define CONFIG_PREBOOT          "echo '';" \
  89         "echo 'type:';" \
  90         "echo 'run boot_nfs       to boot to NFS';" \
  91         "echo 'run boot_flash     to boot to flash';" \
  92         "echo '';" \
  93         "echo 'run flash_rootfs   to install a new rootfs';" \
  94         "echo 'run flash_env      to clear the env sector';" \
  95         "echo 'run flash_rw       to clear the rw fs';" \
  96         "echo 'run flash_uboot    to install a new u-boot';" \
  97         "echo 'run flash_kernel   to install a new kernel';"
  98
  99 /* wait 5 seconds before executing CONFIG_BOOTCOMMAND */
 100 #define CONFIG_BOOTDELAY        5
 101 #define CONFIG_BOOTCOMMAND      "run boot_nfs"
 102
 103 #undef CONFIG_BOOTARGS          /* made by set_nfs of set_flash */
 104
 105 /* Our flash filesystem looks like this
 106  *
 107  * 4Mb board:
 108  * ffc0 0000 - ffeb ffff        root filesystem (jffs2) (~3Mb)
 109  * ffec 0000 - ffed ffff        read-write filesystem (ext2)
 110  * ffee 0000 - ffef ffff        environment
 111  * fff0 0000 - fff1 ffff        u-boot
 112  * fff2 0000 - ffff ffff        linux kernel
 113  *
 114  * 8Mb board:
 115  * ff80 0000 - ffeb ffff        root filesystem (jffs2) (~7Mb)
 116  * ffec 0000 - ffed ffff        read-write filesystem (ext2)
 117  * ffee 0000 - ffef ffff        environment
 118  * fff0 0000 - fff1 ffff        u-boot
 119  * fff2 0000 - ffff ffff        linux kernel
 120  *
 121  */
 122
 123 /* environment for 4Mb board */
 124 #ifdef CONFIG_FLASH_4MB
 125 #define CONFIG_EXTRA_ENV_SETTINGS \
 126         "serial#=QS823\0" \
 127         "hostname=qs823\0" \
 128         "netdev=eth0\0" \
 129         "ethaddr=00:01:02:B4:36:56\0" \
 130         "rootpath=/exports/rootfs\0" \
 131         "mtdparts=mtdparts=phys:2816k(root),128k(rw),128k(env),128k(u-boot),-(kernel)\0" \
 132         /* fill in variables */ \
 133         "set_ip=setenv ip ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off\0" \
 134         "set_nfs=setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath $ip init=/sbin/init $mtdparts\0" \
 135         "set_flash=setenv bootargs root=/dev/mtdblock1 ro $ip init=/sbin/init $mtdparts\0" \
 136         /* commands */ \
 137         "boot_nfs=run set_ip; run set_nfs; tftp 0x400000 /tftpboot/vmlinux.UBoot; bootm 0x400000\0" \
 138         "boot_flash=run set_ip; run set_flash; bootm fff20000\0" \
 139         /* reinstall flash parts */ \
 140         "flash_rootfs=protect off ffc00000 ffebffff; era ffc00000 ffebffff; tftp ffc00000 /tftpboot/rootfs.jffs2\0" \
 141         "flash_rw=protect off ffec0000 ffedffff; era ffec0000 ffedffff\0" \
 142         "flash_env=protect off ffee0000 ffefffff; era ffee0000 ffefffff\0" \
 143         "flash_uboot=protect off fff00000 fff1ffff; era fff00000 fff1ffff; tftp fff00000 /tftpboot/u-boot.4mb.bin\0" \
 144         "flash_kernel=protect off fff20000 ffffffff; era fff20000 ffffffff; tftp fff20000 /tftpboot/vmlinux.UBoot\0"
 145 #endif /* CONFIG_FLASH_4MB */
 146
 147 /* environment for 8Mb board */
 148 #ifdef CONFIG_FLASH_8MB
 149 #define CONFIG_EXTRA_ENV_SETTINGS \
 150         "serial#=QS823\0" \
 151         "hostname=qs823\0" \
 152         "netdev=eth0\0" \
 153         "ethaddr=00:01:02:B4:36:56\0" \
 154         "rootpath=/exports/rootfs\0" \
 155         "mtdparts=mtdparts=phys:6912k(root),128k(rw),128k(env),128k(u-boot),-(kernel)\0" \
 156         /* fill in variables */ \
 157         "set_ip=setenv ip ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off\0" \
 158         "set_nfs=setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath $ip init=/sbin/init $mtdparts\0" \
 159         "set_flash=setenv bootargs root=/dev/mtdblock1 ro $ip init=/sbin/init $mtdparts\0" \
 160         /* commands */ \
 161         "boot_nfs=run set_ip; run set_nfs; tftp 0x400000 /tftpboot/vmlinux.UBoot; bootm 0x400000\0" \
 162         "boot_flash=run set_ip; run set_flash; bootm fff20000\0" \
 163         /* reinstall flash parts */ \
 164         "flash_rootfs=protect off ff800000 ffebffff; era ff800000 ffebffff; tftp ff800000 /tftpboot/rootfs.jffs2\0" \
 165         "flash_rw=protect off ffec0000 ffedffff; era ffec0000 ffedffff\0" \
 166         "flash_env=protect off ffee0000 ffefffff; era ffee0000 ffefffff\0" \
 167         "flash_uboot=protect off fff00000 fff1ffff; era fff00000 fff1ffff; tftp fff00000 /tftpboot/u-boot.8mb.bin\0" \
 168         "flash_kernel=protect off fff20000 ffffffff; era fff20000 ffffffff; tftp fff20000 /tftpboot/vmlinux.UBoot\0"
 169 #endif /* CONFIG_FLASH_8MB */
 170
 171 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download */
 172 #undef CONFIG_SYS_LOADS_BAUD_CHANGE             /* don't allow baudrate change */
 173 #undef CONFIG_WATCHDOG                  /* watchdog disabled */
 174 #undef CONFIG_STATUS_LED                /* Status LED disabled */
 175 #undef CONFIG_CAN_DRIVER                /* CAN Driver support disabled */
 176
 177 /*
 178  * BOOTP options
 179  */
 180 #define CONFIG_BOOTP_SUBNETMASK
 181 #define CONFIG_BOOTP_GATEWAY
 182 #define CONFIG_BOOTP_HOSTNAME
 183 #define CONFIG_BOOTP_BOOTPATH
 184 #define CONFIG_BOOTP_BOOTFILESIZE
 185
 186
 187 #undef CONFIG_MAC_PARTITION
 188 #undef CONFIG_DOS_PARTITION
 189
 190 #define CONFIG_RTC_MPC8xx       /* use internal RTC of MPC8xx */
 191
 192
 193 /*
 194  * Command line configuration.
 195  */
 196 #define CONFIG_CMD_BDI
 197 #define CONFIG_CMD_BOOTD
 198 #define CONFIG_CMD_CONSOLE
 199 #define CONFIG_CMD_DATE
 200 #define CONFIG_CMD_SAVEENV
 201 #define CONFIG_CMD_FLASH
 202 #define CONFIG_CMD_IMI
 203 #define CONFIG_CMD_IMMAP
 204 #define CONFIG_CMD_MEMORY
 205 #define CONFIG_CMD_NET
 206 #define CONFIG_CMD_RUN
 207
 208
 209 /*-----------------------------------------------------------------------
 210  * Environment variable storage is in FLASH, one sector before U-boot
 211  */
 212 #define CONFIG_ENV_IS_IN_FLASH  1
 213 #define CONFIG_ENV_SECT_SIZE    0x20000         /* 128Kb, one whole sector */
 214 #define CONFIG_ENV_SIZE         0x2000          /* 8kb */
 215 #define CONFIG_ENV_ADDR         0xffee0000      /* address of env sector */
 216
 217 /*-----------------------------------------------------------------------
 218  * Miscellaneous configurable options
 219  */
 220 #define CONFIG_SYS_LONGHELP                             /* undef to save memory */
 221 #define CONFIG_SYS_PROMPT               "=> "           /* Monitor Command Prompt */
 222
 223 #define CONFIG_SYS_HUSH_PARSER          1               /* use "hush" command parser */
 224
 225 #if defined(CONFIG_CMD_KGDB)
 226 #define CONFIG_SYS_CBSIZE               1024            /* Console I/O Buffer Size */
 227 #else
 228 #define CONFIG_SYS_CBSIZE               256             /* Console I/O Buffer Size */
 229 #endif
 230 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 231 #define CONFIG_SYS_MAXARGS              16              /* max number of command args */
 232 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
 233
 234 #define CONFIG_SYS_MEMTEST_START        0x0400000       /* memtest works */
 235 #define CONFIG_SYS_MEMTEST_END          0x0C00000       /* 4 ... 12 MB in DRAM */
 236
 237 #define CONFIG_SYS_LOAD_ADDR            0x400000        /* default load address */
 238
 239 #define CONFIG_SYS_HZ                   1000            /* decrementer freq: 1 ms ticks */
 240
 241 /*-----------------------------------------------------------------------
 242  * Low Level Configuration Settings
 243  * (address mappings, register initial values, etc.)
 244  * You should know what you are doing if you make changes here.
 245  */
 246
 247 /*-----------------------------------------------------------------------
 248  * Internal Memory Mapped Register
 249  */
 250 #define CONFIG_SYS_IMMR         0xFF000000
 251
 252 /*-----------------------------------------------------------------------
 253  * Definitions for initial stack pointer and data area (in DPRAM)
 254  */
 255 #define CONFIG_SYS_INIT_RAM_ADDR        CONFIG_SYS_IMMR
 256 #define CONFIG_SYS_INIT_RAM_SIZE        0x2F00          /* Size of used area in DPRAM */
 257 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 258 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 259
 260 /*-----------------------------------------------------------------------
 261  * Start addresses for the final memory configuration
 262  * (Set up by the startup code)
 263  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 264  */
 265 #define CONFIG_SYS_SDRAM_BASE           0x00000000
 266 #define CONFIG_SYS_FLASH_BASE           0xFF800000      /* Allow an 8Mbyte window */
 267
 268 #define FLASH_BASE0_4M_PRELIM   0xFFC00000      /* Base for 4M Flash */
 269 #define FLASH_BASE0_8M_PRELIM   0xFF800000      /* Base for 8M Flash */
 270
 271 #define CONFIG_SYS_MONITOR_LEN          (192 << 10)     /* Reserve 192 kB for Monitor */
 272 #define CONFIG_SYS_MONITOR_BASE 0xFFF00000      /* U-boot location */
 273 #define CONFIG_SYS_MALLOC_LEN           (128 << 10)     /* Reserve 128 kB for malloc() */
 274
 275 /*
 276  * For booting Linux, the board info and command line data
 277  * have to be in the first 8 MB of memory, since this is
 278  * the maximum mapped by the Linux kernel during initialization.
 279  */
 280 #define CONFIG_SYS_BOOTMAPSZ            (8 << 20)       /* Initial Memory map for Linux */
 281
 282 /*-----------------------------------------------------------------------
 283  * TODO flash parameters
 284  * FLASH organization for Intel Strataflash
 285  */
 286 #undef  CONFIG_SYS_FLASH_16BIT                          /* 32-bit wide flash memory */
 287 #define CONFIG_SYS_MAX_FLASH_BANKS      1               /* max number of memory banks */
 288 #define CONFIG_SYS_MAX_FLASH_SECT       71              /* max number of sectors on one chip */
 289
 290 #define CONFIG_SYS_FLASH_ERASE_TOUT     120000          /* Timeout for Flash Erase (in ms) */
 291 #define CONFIG_SYS_FLASH_WRITE_TOUT     500             /* Timeout for Flash Write (in ms) */
 292
 293 /*-----------------------------------------------------------------------
 294  * Cache Configuration
 295  */
 296 #define CONFIG_SYS_CACHELINE_SIZE       16              /* For all MPC8xx CPUs */
 297 #if defined(CONFIG_CMD_KGDB)
 298 #define CONFIG_SYS_CACHELINE_SHIFT      4               /* log base 2 of the above value */
 299 #endif
 300
 301 /*-----------------------------------------------------------------------
 302  * SYPCR - System Protection Control 11-9
 303  * SYPCR can only be written once after reset!
 304  *-----------------------------------------------------------------------
 305  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
 306  */
 307
 308 #ifdef CONFIG_WATCHDOG
 309 #define CONFIG_SYS_SYPCR        (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWE | SYPCR_SWRI | SYPCR_SWP)
 310 #else
 311 #define CONFIG_SYS_SYPCR        (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWRI | SYPCR_SWP)
 312 #endif
 313
 314 /*-----------------------------------------------------------------------
 315  * SIUMCR - SIU Module Configuration 11-6
 316  *-----------------------------------------------------------------------
 317  */
 318 #define CONFIG_SYS_SIUMCR       (SIUMCR_DLK | SIUMCR_DPC | SIUMCR_MPRE | SIUMCR_MLRC01 | SIUMCR_GB5E)
 319
 320 /*-----------------------------------------------------------------------
 321  * TBSCR - Time Base Status and Control 11-26
 322  *-----------------------------------------------------------------------
 323  */
 324 #define CONFIG_SYS_TBSCR        (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 325
 326 /*-----------------------------------------------------------------------
 327  * RTCSC - Real-Time Clock Status and Control Register 11-27
 328  *-----------------------------------------------------------------------
 329  */
 330 #define CONFIG_SYS_RTCSC        (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
 331
 332 /*-----------------------------------------------------------------------
 333  * PISCR - Periodic Interrupt Status and Control 11-31
 334  *-----------------------------------------------------------------------
 335  */
 336 #define CONFIG_SYS_PISCR        (PISCR_PS | PISCR_PITF)
 337
 338 /*-----------------------------------------------------------------------
 339  * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
 340  *-----------------------------------------------------------------------
 341  */
 342
 343 /* MF (Multiplication Factor of SPLL) */
 344 /* Sets the QS823 to specified clock from 32KHz clock at EXTAL. */
 345 #define vPLPRCR_MF      ((CONFIG_CLOCK_MULT+1) << 20)
 346 #define CONFIG_SYS_PLPRCR       (vPLPRCR_MF | PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST | PLPRCR_LOLRE)
 347
 348 /*-----------------------------------------------------------------------
 349  * SCCR - System Clock and reset Control Register               15-27
 350  *-----------------------------------------------------------------------
 351  */
 352 #if defined(CONFIG_CLOCK_16MHZ) || defined(CONFIG_CLOCK_33MHZ) || defined(CONFIG_CLOCK_50MHZ)
 353 #define CONFIG_SYS_SCCR         (SCCR_TBS | SCCR_EBDF00 | SCCR_DFBRG00)
 354 #define CONFIG_SYS_BRGCLK_PRESCALE      1
 355 #endif
 356
 357 #if defined(CONFIG_CLOCK_66MHZ)
 358 #define CONFIG_SYS_SCCR         (SCCR_TBS | SCCR_EBDF00 | SCCR_DFBRG01)
 359 #define CONFIG_SYS_BRGCLK_PRESCALE      4
 360 #endif
 361
 362 #if defined(CONFIG_CLOCK_80MHZ)
 363 #define CONFIG_SYS_SCCR         (SCCR_TBS | SCCR_EBDF01 | SCCR_DFBRG01)
 364 #define CONFIG_SYS_BRGCLK_PRESCALE      4
 365 #endif
 366
 367 #define SCCR_MASK               CONFIG_SYS_SCCR
 368
 369 /*-----------------------------------------------------------------------
 370  * Debug Enable Register
 371  * 0x73E67C0F - All interrupts handled by BDM
 372  * 0x00824001 - Only interrupts needed by MWDebug.exe handled by BDM
 373  *-----------------------------------------------------------------------
 374 #define CONFIG_SYS_DER                  0x73E67C0F
 375 #define CONFIG_SYS_DER                  0x0082400F
 376
 377  #-------------------------------------------------------------------------
 378  # Program the Debug Enable Register (DER). This register provides the user
 379  # with the reason for entering into the debug mode. We want all conditions
 380  # to end up as an exception. We don't want to enter into debug mode for
 381  # any condition. See the back of of the Development Support section of the
 382  # MPC860 User Manual for a description of this register.
 383  #-------------------------------------------------------------------------
 384 */
 385 #define CONFIG_SYS_DER                  0
 386
 387 /*-----------------------------------------------------------------------
 388  * Memory Controller Initialization Constants
 389  *-----------------------------------------------------------------------
 390  */
 391
 392 /*
 393  * BR0 and OR0 (AMD dual FLASH devices)
 394  * Base address = 0xFFF0_0000 - 0xFFF7_FFFF (After relocation)
 395  */
 396 #define CONFIG_SYS_PRELIM_OR_AM
 397 #define CONFIG_SYS_OR_TIMING_FLASH
 398
 399 /*
 400  *-----------------------------------------------------------------------
 401  * Base Register 0 (BR0): Bank 0 is assigned to the 8Mbyte (2M X 32)
 402  *                        flash that resides on the QS823.
 403  *-----------------------------------------------------------------------
 404  */
 405
 406 /* BA (Base Address) = 0xFF80+0b for a total of 17 bits. 17 bit base addr */
 407 /*                     represents a minumum 32K block size. */
 408 #define vBR0_BA                 ((0xFF80 << 16) + (0 << 15))
 409 #define CONFIG_SYS_BR0_PRELIM           (vBR0_BA | BR_V)
 410
 411 /* AM (Address Mask) = 0xFF80+0b = We've masked the upper 9 bits        */
 412 /*                                 which defines a 8 Mbyte memory block. */
 413 #define vOR0_AM                 ((0xFF80 << 16) + (0 << 15))
 414
 415 #if defined(CONFIG_CLOCK_50MHZ) || defined(CONFIG_CLOCK_80MHZ)
 416 /*  0101 = Add a 5 clock cycle wait state */
 417 #define CONFIG_SYS_OR0_PRELIM           (vOR0_AM | OR_CSNT_SAM | 0R_ACS_DIV4 | OR_BI | OR_SCY_5_CLK)
 418 #endif
 419
 420 #if defined(CONFIG_CLOCK_33MHZ) || defined(CONFIG_CLOCK_66MHZ)
 421 /*  0011 = Add a 3 clock cycle wait state */
 422 /*  29.8ns clock * (3 + 2) = 149ns cycle time */
 423 #define CONFIG_SYS_OR0_PRELIM           (vOR0_AM | OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_3_CLK)
 424 #endif
 425
 426 #if defined(CONFIG_CLOCK_16MHZ)
 427 /*  0010 = Add a 2 clock cycle wait state */
 428 #define CONFIG_SYS_OR0_PRELIM           (vOR0_AM | OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_2_CLK)
 429 #endif
 430
 431 /*
 432  * BR1 and OR1 (SDRAM)
 433  * Base Address = 0x00000000 - 0x00FF_FFFF (16M After relocation)
 434  * Base Address = 0x00000000 - 0x01FF_FFFF (32M After relocation)
 435  * Base Address = 0x00000000 - 0x03FF_FFFF (64M After relocation)
 436  * Base Address = 0x00000000 - 0x07FF_FFFF (128M After relocation)
 437  */
 438
 439 #define SDRAM_BASE              0x00000000      /* SDRAM bank */
 440 #define SDRAM_PRELIM_OR_AM      0xF8000000      /* map max. 128 MB */
 441
 442 /* AM (Address Mask) = 0xF800+0b = We've masked the upper 5 bits which
 443  *                                 represents a 128 Mbyte block the DRAM in
 444  *                                 this address base.
 445  */
 446 #define vOR1_AM                 ((0xF800 << 16) + (0 << 15))
 447 #define vBR1_BA                 ((0x0000 << 16) + (0 << 15))
 448 #define CONFIG_SYS_OR1                  (vOR1_AM | OR_CSNT_SAM | OR_BI)
 449 #define CONFIG_SYS_BR1                  (vBR1_BA | BR_MS_UPMA | BR_V)
 450
 451 /* Machine A Mode Register */
 452
 453 /* PTA Periodic Timer A */
 454
 455 #if defined(CONFIG_CLOCK_80MHZ)
 456 #define vMAMR_PTA               (19 << 24)
 457 #endif
 458
 459 #if defined(CONFIG_CLOCK_66MHZ)
 460 #define vMAMR_PTA               (16 << 24)
 461 #endif
 462
 463 #if defined(CONFIG_CLOCK_50MHZ)
 464 #define vMAMR_PTA               (195 << 24)
 465 #endif
 466
 467 #if defined(CONFIG_CLOCK_33MHZ)
 468 #define vMAMR_PTA               (131 << 24)
 469 #endif
 470
 471 #if defined(CONFIG_CLOCK_16MHZ)
 472 #define vMAMR_PTA               (65 << 24)
 473 #endif
 474
 475 /* For boards with 16M of SDRAM */
 476 #define SDRAM_16M_MAX_SIZE      0x01000000      /* max 16MB SDRAM */
 477 #define CONFIG_SYS_16M_MAMR             (vMAMR_PTA | MAMR_AMA_TYPE_0 | MAMR_DSA_2_CYCL | MAMR_G0CLA_A11 |\
 478 MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
 479
 480 /* For boards with 32M of SDRAM */
 481 #define SDRAM_32M_MAX_SIZE      0x02000000      /* max 32MB SDRAM */
 482 #define CONFIG_SYS_32M_MAMR             (vMAMR_PTA | MAMR_AMA_TYPE_1 | MAMR_DSA_2_CYCL | MAMR_G0CLA_A10 |\
 483 MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
 484
 485
 486 /* Memory Periodic Timer Prescaler Register */
 487
 488 #if defined(CONFIG_CLOCK_66MHZ) || defined(CONFIG_CLOCK_80MHZ)
 489 /* Divide by 32 */
 490 #define CONFIG_SYS_MPTPR                0x02
 491 #endif
 492
 493 #if defined(CONFIG_CLOCK_16MHZ) || defined(CONFIG_CLOCK_33MHZ) || defined(CONFIG_CLOCK_50MHZ)
 494 /* Divide by 16 */
 495 #define CONFIG_SYS_MPTPR                0x04
 496 #endif
 497
 498 /*
 499  * BR2 and OR2 (Unused)
 500  * Base address = 0xF020_0000 - 0xF020_0FFF
 501  *
 502  */
 503 #define CONFIG_SYS_OR2_PRELIM           0xFFF00000
 504 #define CONFIG_SYS_BR2_PRELIM           0xF0200000
 505
 506 /*
 507  * BR3 and OR3 (External Bus CS3)
 508  * Base address = 0xF030_0000 - 0xF030_0FFF
 509  *
 510  */
 511 #define CONFIG_SYS_OR3_PRELIM           0xFFF00000
 512 #define CONFIG_SYS_BR3_PRELIM           0xF0300000
 513
 514 /*
 515  * BR4 and OR4 (External Bus CS3)
 516  * Base address = 0xF040_0000 - 0xF040_0FFF
 517  *
 518  */
 519 #define CONFIG_SYS_OR4_PRELIM           0xFFF00000
 520 #define CONFIG_SYS_BR4_PRELIM           0xF0400000
 521
 522
 523 /*
 524  * BR4 and OR4 (External Bus CS3)
 525  * Base address = 0xF050_0000 - 0xF050_0FFF
 526  *
 527  */
 528 #define CONFIG_SYS_OR5_PRELIM           0xFFF00000
 529 #define CONFIG_SYS_BR5_PRELIM           0xF0500000
 530
 531 /*
 532  * BR6 and OR6 (Unused)
 533  * Base address = 0xF060_0000 - 0xF060_0FFF
 534  *
 535  */
 536 #define CONFIG_SYS_OR6_PRELIM           0xFFF00000
 537 #define CONFIG_SYS_BR6_PRELIM           0xF0600000
 538
 539 /*
 540  * BR7 and OR7 (Unused)
 541  * Base address = 0xF070_0000 - 0xF070_0FFF
 542  *
 543  */
 544 #define CONFIG_SYS_OR7_PRELIM           0xFFF00000
 545 #define CONFIG_SYS_BR7_PRELIM           0xF0700000
 546
 547 /*
 548  * Sanity checks
 549  */
 550 #if defined(CONFIG_SCC1_ENET) && defined(CONFIG_FEC_ENET)
 551 #error Both CONFIG_SCC1_ENET and CONFIG_FEC_ENET configured
 552 #endif
 553
 554 #endif /* __CONFIG_H */