include/configs/RPXlite.h

   1 /*
   2  * (C) Copyright 2000
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  *
   5  * See file CREDITS for list of people who contributed to this
   6  * project.
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of
  11  * the License, or (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21  * MA 02111-1307 USA
  22  */
  23
  24 /* Yoo. Jonghoon, IPone, yooth@ipone.co.kr
  25  * U-Boot port on RPXlite board
  26  */
  27
  28 #ifndef __CONFIG_H
  29 #define __CONFIG_H
  30
  31 #define RPXLite_50MHz
  32
  33 /*
  34  * High Level Configuration Options
  35  * (easy to change)
  36  */
  37
  38 #undef CONFIG_MPC860
  39 #define CONFIG_MPC850           1       /* This is a MPC850 CPU         */
  40 #define CONFIG_RPXLITE          1
  41
  42 #define CONFIG_8xx_CONS_SMC1    1       /* Console is on SMC1           */
  43 #undef  CONFIG_8xx_CONS_SMC2
  44 #undef  CONFIG_8xx_CONS_NONE
  45 #define CONFIG_BAUDRATE         9600    /* console baudrate = 9600bps   */
  46 #if 0
  47 #define CONFIG_BOOTDELAY        -1      /* autoboot disabled            */
  48 #else
  49 #define CONFIG_BOOTDELAY        5       /* autoboot after 5 seconds     */
  50 #endif
  51
  52 #undef  CONFIG_BOOTARGS
  53 #define CONFIG_BOOTCOMMAND                                                      \
  54         "bootp; "                                                               \
  55         "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} "     \
  56         "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; "   \
  57         "bootm"
  58
  59 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download  */
  60 #undef  CONFIG_SYS_LOADS_BAUD_CHANGE            /* don't allow baudrate change  */
  61
  62 #define CONFIG_BZIP2            /* Include support for bzip2 compressed images  */
  63 #undef  CONFIG_WATCHDOG                 /* watchdog disabled            */
  64
  65 /*
  66  * BOOTP options
  67  */
  68 #define CONFIG_BOOTP_SUBNETMASK
  69 #define CONFIG_BOOTP_GATEWAY
  70 #define CONFIG_BOOTP_HOSTNAME
  71 #define CONFIG_BOOTP_BOOTPATH
  72 #define CONFIG_BOOTP_BOOTFILESIZE
  73
  74
  75 /*
  76  * Command line configuration.
  77  */
  78 #include <config_cmd_default.h>
  79
  80
  81 /*
  82  * Miscellaneous configurable options
  83  */
  84 #define CONFIG_SYS_LONGHELP                     /* undef to save memory         */
  85 #define CONFIG_SYS_PROMPT       "=> "           /* Monitor Command Prompt       */
  86 #if defined(CONFIG_CMD_KGDB)
  87 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size      */
  88 #else
  89 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size      */
  90 #endif
  91 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
  92 #define CONFIG_SYS_MAXARGS      16              /* max number of command args   */
  93 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size    */
  94
  95 #define CONFIG_SYS_MEMTEST_START        0x00400000      /* memtest works on     */
  96 #define CONFIG_SYS_MEMTEST_END          0x00C00000      /* 4 ... 12 MB in DRAM  */
  97
  98 #define CONFIG_SYS_RESET_ADDRESS        0x09900000
  99
 100 #define CONFIG_SYS_LOAD_ADDR            0x400000        /* default load address */
 101
 102 #define CONFIG_SYS_HZ                   1000            /* decrementer freq: 1 ms ticks */
 103
 104 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, 115200 }
 105
 106 /*
 107  * Low Level Configuration Settings
 108  * (address mappings, register initial values, etc.)
 109  * You should know what you are doing if you make changes here.
 110  */
 111 /*-----------------------------------------------------------------------
 112  * Internal Memory Mapped Register
 113  */
 114 #define CONFIG_SYS_IMMR         0xFA200000
 115
 116 /*-----------------------------------------------------------------------
 117  * Definitions for initial stack pointer and data area (in DPRAM)
 118  */
 119 #define CONFIG_SYS_INIT_RAM_ADDR        CONFIG_SYS_IMMR
 120 #define CONFIG_SYS_INIT_RAM_END 0x2F00  /* End of used area in DPRAM    */
 121 #define CONFIG_SYS_GBL_DATA_SIZE        64  /* size in bytes reserved for initial data */
 122 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 123 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 124
 125 /*-----------------------------------------------------------------------
 126  * Start addresses for the final memory configuration
 127  * (Set up by the startup code)
 128  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 129  */
 130 #define CONFIG_SYS_SDRAM_BASE           0x00000000
 131 #define CONFIG_SYS_FLASH_BASE           0xFFC00000
 132 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
 133 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 256 kB for Monitor   */
 134 #ifdef CONFIG_BZIP2
 135 #define CONFIG_SYS_MALLOC_LEN           (4096 << 10)    /* Reserve ~4 MB for malloc()   */
 136 #else
 137 #define CONFIG_SYS_MALLOC_LEN           (128 << 10)     /* Reserve 128 KB for malloc()  */
 138 #endif /* CONFIG_BZIP2 */
 139
 140 /*
 141  * For booting Linux, the board info and command line data
 142  * have to be in the first 8 MB of memory, since this is
 143  * the maximum mapped by the Linux kernel during initialization.
 144  */
 145 #define CONFIG_SYS_BOOTMAPSZ            (8 << 20)       /* Initial Memory map for Linux */
 146
 147 /*-----------------------------------------------------------------------
 148  * FLASH organization
 149  */
 150 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* max number of memory banks           */
 151 #define CONFIG_SYS_MAX_FLASH_SECT       19      /* max number of sectors on one chip    */
 152
 153 #define CONFIG_SYS_FLASH_ERASE_TOUT     120000  /* Timeout for Flash Erase (in ms)      */
 154 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Timeout for Flash Write (in ms)      */
 155
 156 #define CONFIG_SYS_DIRECT_FLASH_TFTP
 157
 158 #define CONFIG_ENV_IS_IN_FLASH  1
 159 #define CONFIG_ENV_SECT_SIZE    0x40000 /* We use one complete sector           */
 160 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
 161
 162 #define CONFIG_ENV_OVERWRITE
 163
 164 /*-----------------------------------------------------------------------
 165  * Cache Configuration
 166  */
 167 #define CONFIG_SYS_CACHELINE_SIZE       16      /* For all MPC8xx CPUs                  */
 168 #if defined(CONFIG_CMD_KGDB)
 169 #define CONFIG_SYS_CACHELINE_SHIFT      4       /* log base 2 of the above value        */
 170 #endif
 171
 172 /*-----------------------------------------------------------------------
 173  * SYPCR - System Protection Control                            11-9
 174  * SYPCR can only be written once after reset!
 175  *-----------------------------------------------------------------------
 176  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
 177  */
 178 #if defined(CONFIG_WATCHDOG)
 179 #define CONFIG_SYS_SYPCR        (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 180                          SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 181 #else
 182 #define CONFIG_SYS_SYPCR        (SYPCR_SWTC | 0x00000600 | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 183 #endif
 184
 185 /*-----------------------------------------------------------------------
 186  * SIUMCR - SIU Module Configuration                            11-6
 187  *-----------------------------------------------------------------------
 188  * PCMCIA config., multi-function pin tri-state
 189  */
 190 #define CONFIG_SYS_SIUMCR       (SIUMCR_MLRC10)
 191
 192 /*-----------------------------------------------------------------------
 193  * TBSCR - Time Base Status and Control                         11-26
 194  *-----------------------------------------------------------------------
 195  * Clear Reference Interrupt Status, Timebase freezing enabled
 196  */
 197 #define CONFIG_SYS_TBSCR        (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF | TBSCR_TBE)
 198
 199 /*-----------------------------------------------------------------------
 200  * RTCSC - Real-Time Clock Status and Control Register          11-27
 201  *-----------------------------------------------------------------------
 202  */
 203 /*%%%#define CONFIG_SYS_RTCSC   (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) */
 204 #define CONFIG_SYS_RTCSC        (RTCSC_SEC | RTCSC_RTE)
 205
 206 /*-----------------------------------------------------------------------
 207  * PISCR - Periodic Interrupt Status and Control                11-31
 208  *-----------------------------------------------------------------------
 209  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
 210  */
 211 #define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF)
 212
 213 /*-----------------------------------------------------------------------
 214  * PLPRCR - PLL, Low-Power, and Reset Control Register          15-30
 215  *-----------------------------------------------------------------------
 216  * Reset PLL lock status sticky bit, timer expired status bit and timer
 217  * interrupt status bit
 218  *
 219  * If this is a 80 MHz CPU, set PLL multiplication factor to 5 (5*16=80)!
 220  */
 221 /* up to 50 MHz we use a 1:1 clock */
 222 #define CONFIG_SYS_PLPRCR       ( (5 << PLPRCR_MF_SHIFT) | PLPRCR_TEXPS )
 223
 224 /*-----------------------------------------------------------------------
 225  * SCCR - System Clock and reset Control Register               15-27
 226  *-----------------------------------------------------------------------
 227  * Set clock output, timebase and RTC source and divider,
 228  * power management and some other internal clocks
 229  */
 230 #define SCCR_MASK       SCCR_EBDF00
 231 /* up to 50 MHz we use a 1:1 clock */
 232 #define CONFIG_SYS_SCCR (SCCR_COM11 | SCCR_TBS)
 233
 234 /*-----------------------------------------------------------------------
 235  * PCMCIA stuff
 236  *-----------------------------------------------------------------------
 237  *
 238  */
 239 #define CONFIG_SYS_PCMCIA_MEM_ADDR      (0xE0000000)
 240 #define CONFIG_SYS_PCMCIA_MEM_SIZE      ( 64 << 20 )
 241 #define CONFIG_SYS_PCMCIA_DMA_ADDR      (0xE4000000)
 242 #define CONFIG_SYS_PCMCIA_DMA_SIZE      ( 64 << 20 )
 243 #define CONFIG_SYS_PCMCIA_ATTRB_ADDR    (0xE8000000)
 244 #define CONFIG_SYS_PCMCIA_ATTRB_SIZE    ( 64 << 20 )
 245 #define CONFIG_SYS_PCMCIA_IO_ADDR       (0xEC000000)
 246 #define CONFIG_SYS_PCMCIA_IO_SIZE       ( 64 << 20 )
 247
 248 /*-----------------------------------------------------------------------
 249  * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
 250  *-----------------------------------------------------------------------
 251  */
 252
 253 #define CONFIG_IDE_8xx_PCCARD   1       /* Use IDE with PC Card Adapter */
 254
 255 #undef  CONFIG_IDE_8xx_DIRECT           /* Direct IDE    not supported  */
 256 #undef  CONFIG_IDE_LED                  /* LED   for ide not supported  */
 257 #undef  CONFIG_IDE_RESET                /* reset for ide not supported  */
 258
 259 #define CONFIG_SYS_IDE_MAXBUS           1       /* max. 1 IDE bus               */
 260 #define CONFIG_SYS_IDE_MAXDEVICE        1       /* max. 1 drive per IDE bus     */
 261
 262 #define CONFIG_SYS_ATA_IDE0_OFFSET      0x0000
 263
 264 #define CONFIG_SYS_ATA_BASE_ADDR        CONFIG_SYS_PCMCIA_MEM_ADDR
 265
 266 /* Offset for data I/O                  */
 267 #define CONFIG_SYS_ATA_DATA_OFFSET      (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 268
 269 /* Offset for normal register accesses  */
 270 #define CONFIG_SYS_ATA_REG_OFFSET       (2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 271
 272 /* Offset for alternate registers       */
 273 #define CONFIG_SYS_ATA_ALT_OFFSET       0x0100
 274
 275 /*-----------------------------------------------------------------------
 276  *
 277  *-----------------------------------------------------------------------
 278  *
 279  */
 280 /*#define       CONFIG_SYS_DER  0x2002000F*/
 281 #define CONFIG_SYS_DER  0
 282
 283 /*
 284  * Init Memory Controller:
 285  *
 286  * BR0 and OR0 (FLASH)
 287  */
 288
 289 #define FLASH_BASE_PRELIM       0xFE000000      /* FLASH base */
 290 #define CONFIG_SYS_PRELIM_OR_AM 0xFE000000      /* OR addr mask */
 291
 292 /* FLASH timing: ACS = 0, TRLX = 0, CSNT = 0, SCY = 4, ETHR = 0, BIH = 1 */
 293 #define CONFIG_SYS_OR_TIMING_FLASH (OR_SCY_4_CLK | OR_BI)
 294
 295 #define CONFIG_SYS_OR0_PRELIM   (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
 296 #define CONFIG_SYS_BR0_PRELIM   ((FLASH_BASE_PRELIM & BR_BA_MSK) | BR_V)
 297
 298 /*
 299  * BR1 and OR1 (SDRAM)
 300  *
 301  */
 302 #define SDRAM_BASE_PRELIM       0x00000000      /* SDRAM base   */
 303 #define SDRAM_MAX_SIZE          0x01000000      /* max 16 MB */
 304
 305 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)      */
 306 #define CONFIG_SYS_OR_TIMING_SDRAM      0x00000E00
 307
 308 #define CONFIG_SYS_OR1_PRELIM   (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM )
 309 #define CONFIG_SYS_BR1_PRELIM   ((SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 310
 311 /* RPXLITE mem setting */
 312 #define CONFIG_SYS_BR3_PRELIM   0xFA400001              /* BCSR */
 313 #define CONFIG_SYS_OR3_PRELIM   0xFFFF8910
 314 #define CONFIG_SYS_BR4_PRELIM   0xFA000401              /* NVRAM&SRAM */
 315 #define CONFIG_SYS_OR4_PRELIM   0xFFFE0970
 316
 317 /*
 318  * Memory Periodic Timer Prescaler
 319  */
 320
 321 /* periodic timer for refresh */
 322 #define CONFIG_SYS_MAMR_PTA     58
 323
 324 /*
 325  * Refresh clock Prescalar
 326  */
 327 #define CONFIG_SYS_MPTPR        MPTPR_PTP_DIV8
 328
 329 /*
 330  * MAMR settings for SDRAM
 331  */
 332
 333 /* 10 column SDRAM */
 334 #define CONFIG_SYS_MAMR_10COL   ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE       |   \
 335                          MAMR_AMA_TYPE_2 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A12 |   \
 336                          MAMR_GPL_A4DIS | MAMR_RLFA_4X | MAMR_WLFA_3X | MAMR_TLFA_16X)
 337
 338 /*
 339  * Internal Definitions
 340  *
 341  * Boot Flags
 342  */
 343 #define BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
 344 #define BOOTFLAG_WARM   0x02            /* Software reboot                      */
 345
 346
 347 /*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% */
 348 /* Configuration variable added by yooth. */
 349 /*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% */
 350
 351 /*
 352  * BCSRx
 353  *
 354  * Board Status and Control Registers
 355  *
 356  */
 357
 358 #define BCSR0 0xFA400000
 359 #define BCSR1 0xFA400001
 360 #define BCSR2 0xFA400002
 361 #define BCSR3 0xFA400003
 362
 363 #define BCSR0_ENMONXCVR 0x01    /* Monitor XVCR Control */
 364 #define BCSR0_ENNVRAM   0x02    /* CS4# Control */
 365 #define BCSR0_LED5      0x04    /* LED5 control 0='on' 1='off' */
 366 #define BCSR0_LED4      0x08    /* LED4 control 0='on' 1='off' */
 367 #define BCSR0_FULLDPLX  0x10    /* Ethernet XCVR Control */
 368 #define BCSR0_COLTEST   0x20
 369 #define BCSR0_ETHLPBK   0x40
 370 #define BCSR0_ETHEN     0x80
 371
 372 #define BCSR1_PCVCTL7   0x01    /* PC Slot B Control */
 373 #define BCSR1_PCVCTL6   0x02
 374 #define BCSR1_PCVCTL5   0x04
 375 #define BCSR1_PCVCTL4   0x08
 376 #define BCSR1_IPB5SEL   0x10
 377
 378 #define BCSR2_ENPA5HDR  0x08    /* USB Control */
 379 #define BCSR2_ENUSBCLK  0x10
 380 #define BCSR2_USBPWREN  0x20
 381 #define BCSR2_USBSPD    0x40
 382 #define BCSR2_USBSUSP   0x80
 383
 384 #define BCSR3_BWRTC     0x01    /* Real Time Clock Battery */
 385 #define BCSR3_BWNVR     0x02    /* NVRAM Battery */
 386 #define BCSR3_RDY_BSY   0x04    /* Flash Operation */
 387 #define BCSR3_RPXL      0x08    /* Reserved (reads back '1') */
 388 #define BCSR3_D27       0x10    /* Dip Switch settings */
 389 #define BCSR3_D26       0x20
 390 #define BCSR3_D25       0x40
 391 #define BCSR3_D24       0x80
 392
 393 #endif  /* __CONFIG_H */