include/configs/T102xQDS.h

   1 /*
   2  * Copyright 2014 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * T1024/T1023 QDS board configuration file
   9  */
  10
  11 #ifndef __T1024QDS_H
  12 #define __T1024QDS_H
  13
  14 /* High Level Configuration Options */
  15 #define CONFIG_DISPLAY_BOARDINFO
  16 #define CONFIG_BOOKE
  17 #define CONFIG_E500                     /* BOOKE e500 family */
  18 #define CONFIG_E500MC                   /* BOOKE e500mc family */
  19 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  20 #define CONFIG_MP                       /* support multiple processors */
  21 #define CONFIG_PHYS_64BIT
  22 #define CONFIG_ENABLE_36BIT_PHYS
  23
  24 #ifdef CONFIG_PHYS_64BIT
  25 #define CONFIG_ADDR_MAP         1
  26 #define CONFIG_SYS_NUM_ADDR_MAP 64      /* number of TLB1 entries */
  27 #endif
  28
  29 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  30 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
  31 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
  32
  33 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  34 #define CONFIG_ENV_OVERWRITE
  35
  36 #define CONFIG_DEEP_SLEEP
  37 #if defined(CONFIG_DEEP_SLEEP)
  38 #define CONFIG_SILENT_CONSOLE
  39 #define CONFIG_BOARD_EARLY_INIT_F
  40 #endif
  41
  42 #ifdef CONFIG_RAMBOOT_PBL
  43 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xqds/t1024_pbi.cfg
  44 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xqds/t1024_rcw.cfg
  45 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
  46 #define CONFIG_SPL_ENV_SUPPORT
  47 #define CONFIG_SPL_SERIAL_SUPPORT
  48 #define CONFIG_SPL_FLUSH_IMAGE
  49 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  50 #define CONFIG_SPL_LIBGENERIC_SUPPORT
  51 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  52 #define CONFIG_SPL_I2C_SUPPORT
  53 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT
  54 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  55 #define CONFIG_SYS_TEXT_BASE            0x00201000
  56 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
  57 #define CONFIG_SPL_PAD_TO               0x40000
  58 #define CONFIG_SPL_MAX_SIZE             0x28000
  59 #define RESET_VECTOR_OFFSET             0x27FFC
  60 #define BOOT_PAGE_OFFSET                0x27000
  61 #ifdef CONFIG_SPL_BUILD
  62 #define CONFIG_SPL_SKIP_RELOCATE
  63 #define CONFIG_SPL_COMMON_INIT_DDR
  64 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  65 #define CONFIG_SYS_NO_FLASH
  66 #endif
  67
  68 #ifdef CONFIG_NAND
  69 #define CONFIG_SPL_NAND_SUPPORT
  70 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  71 #define CONFIG_SYS_NAND_U_BOOT_DST      0x00200000
  72 #define CONFIG_SYS_NAND_U_BOOT_START    0x00200000
  73 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
  74 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  75 #define CONFIG_SPL_NAND_BOOT
  76 #endif
  77
  78 #ifdef CONFIG_SPIFLASH
  79 #define CONFIG_RESET_VECTOR_ADDRESS             0x200FFC
  80 #define CONFIG_SPL_SPI_SUPPORT
  81 #define CONFIG_SPL_SPI_FLASH_SUPPORT
  82 #define CONFIG_SPL_SPI_FLASH_MINIMAL
  83 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (768 << 10)
  84 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x00200000)
  85 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x00200000)
  86 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (256 << 10)
  87 #define CONFIG_SYS_LDSCRIPT             "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  88 #ifndef CONFIG_SPL_BUILD
  89 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  90 #endif
  91 #define CONFIG_SPL_SPI_BOOT
  92 #endif
  93
  94 #ifdef CONFIG_SDCARD
  95 #define CONFIG_RESET_VECTOR_ADDRESS             0x200FFC
  96 #define CONFIG_SPL_MMC_SUPPORT
  97 #define CONFIG_SPL_MMC_MINIMAL
  98 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
  99 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x00200000)
 100 #define CONFIG_SYS_MMC_U_BOOT_START     (0x00200000)
 101 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
 102 #define CONFIG_SYS_LDSCRIPT             "arch/powerpc/cpu/mpc85xx/u-boot.lds"
 103 #ifndef CONFIG_SPL_BUILD
 104 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 105 #endif
 106 #define CONFIG_SPL_MMC_BOOT
 107 #endif
 108
 109 #endif /* CONFIG_RAMBOOT_PBL */
 110
 111 #ifndef CONFIG_SYS_TEXT_BASE
 112 #define CONFIG_SYS_TEXT_BASE    0xeff40000
 113 #endif
 114
 115 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 116 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
 117 #endif
 118
 119 #ifndef CONFIG_SYS_NO_FLASH
 120 #define CONFIG_FLASH_CFI_DRIVER
 121 #define CONFIG_SYS_FLASH_CFI
 122 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 123 #endif
 124
 125 /* PCIe Boot - Master */
 126 #define CONFIG_SRIO_PCIE_BOOT_MASTER
 127 /*
 128  * for slave u-boot IMAGE instored in master memory space,
 129  * PHYS must be aligned based on the SIZE
 130  */
 131 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
 132 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE     0x100000 /* 1M */
 133 #ifdef CONFIG_PHYS_64BIT
 134 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
 135 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
 136 #else
 137 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xef200000
 138 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0xfff00000
 139 #endif
 140 /*
 141  * for slave UCODE and ENV instored in master memory space,
 142  * PHYS must be aligned based on the SIZE
 143  */
 144 #ifdef CONFIG_PHYS_64BIT
 145 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
 146 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS  0x3ffe00000ull
 147 #else
 148 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xef100000
 149 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS  0xffe00000
 150 #endif
 151 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE     0x40000 /* 256K */
 152 /* slave core release by master*/
 153 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
 154 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
 155
 156 /* PCIe Boot - Slave */
 157 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 158 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 159 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 160                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 161 /* Set 1M boot space for PCIe boot */
 162 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
 163 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS       \
 164                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
 165 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
 166 #define CONFIG_SYS_NO_FLASH
 167 #endif
 168
 169 #if defined(CONFIG_SPIFLASH)
 170 #define CONFIG_SYS_EXTRA_ENV_RELOC
 171 #define CONFIG_ENV_IS_IN_SPI_FLASH
 172 #define CONFIG_ENV_SPI_BUS              0
 173 #define CONFIG_ENV_SPI_CS               0
 174 #define CONFIG_ENV_SPI_MAX_HZ           10000000
 175 #define CONFIG_ENV_SPI_MODE             0
 176 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 177 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 178 #define CONFIG_ENV_SECT_SIZE            0x10000
 179 #elif defined(CONFIG_SDCARD)
 180 #define CONFIG_SYS_EXTRA_ENV_RELOC
 181 #define CONFIG_ENV_IS_IN_MMC
 182 #define CONFIG_SYS_MMC_ENV_DEV          0
 183 #define CONFIG_ENV_SIZE                 0x2000
 184 #define CONFIG_ENV_OFFSET               (512 * 0x800)
 185 #elif defined(CONFIG_NAND)
 186 #define CONFIG_SYS_EXTRA_ENV_RELOC
 187 #define CONFIG_ENV_IS_IN_NAND
 188 #define CONFIG_ENV_SIZE                 0x2000
 189 #define CONFIG_ENV_OFFSET               (10 * CONFIG_SYS_NAND_BLOCK_SIZE)
 190 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 191 #define CONFIG_ENV_IS_IN_REMOTE
 192 #define CONFIG_ENV_ADDR         0xffe20000
 193 #define CONFIG_ENV_SIZE         0x2000
 194 #elif defined(CONFIG_ENV_IS_NOWHERE)
 195 #define CONFIG_ENV_SIZE         0x2000
 196 #else
 197 #define CONFIG_ENV_IS_IN_FLASH
 198 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 199 #define CONFIG_ENV_SIZE         0x2000
 200 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 201 #endif
 202
 203
 204 #ifndef __ASSEMBLY__
 205 unsigned long get_board_sys_clk(void);
 206 unsigned long get_board_ddr_clk(void);
 207 #endif
 208
 209 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk()
 210 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk()
 211
 212 /*
 213  * These can be toggled for performance analysis, otherwise use default.
 214  */
 215 #define CONFIG_SYS_CACHE_STASHING
 216 #define CONFIG_BACKSIDE_L2_CACHE
 217 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
 218 #define CONFIG_BTB                      /* toggle branch predition */
 219 #define CONFIG_DDR_ECC
 220 #ifdef CONFIG_DDR_ECC
 221 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 222 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 223 #endif
 224
 225 #define CONFIG_SYS_MEMTEST_START        0x00200000 /* memtest works on */
 226 #define CONFIG_SYS_MEMTEST_END          0x00400000
 227 #define CONFIG_SYS_ALT_MEMTEST
 228 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 229
 230 /*
 231  *  Config the L3 Cache as L3 SRAM
 232  */
 233 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 234 #define CONFIG_SYS_L3_SIZE              (256 << 10)
 235 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
 236 #ifdef CONFIG_RAMBOOT_PBL
 237 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
 238 #endif
 239 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 240 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (30 << 10)
 241 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 242 #define CONFIG_SPL_RELOC_STACK_SIZE     (22 << 10)
 243
 244 #ifdef CONFIG_PHYS_64BIT
 245 #define CONFIG_SYS_DCSRBAR              0xf0000000
 246 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 247 #endif
 248
 249 /* EEPROM */
 250 #define CONFIG_ID_EEPROM
 251 #define CONFIG_SYS_I2C_EEPROM_NXID
 252 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 253 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 254 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 255 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 256 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 257
 258 /*
 259  * DDR Setup
 260  */
 261 #define CONFIG_VERY_BIG_RAM
 262 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 263 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 264 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 265 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 266 #define CONFIG_DDR_SPD
 267 #ifndef CONFIG_SYS_FSL_DDR4
 268 #define CONFIG_SYS_FSL_DDR3
 269 #endif
 270
 271 #define CONFIG_SYS_SPD_BUS_NUM  0
 272 #define SPD_EEPROM_ADDRESS      0x51
 273
 274 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 275
 276 /*
 277  * IFC Definitions
 278  */
 279 #define CONFIG_SYS_FLASH_BASE   0xe0000000
 280 #ifdef CONFIG_PHYS_64BIT
 281 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 282 #else
 283 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 284 #endif
 285
 286 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 287 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 288                                 + 0x8000000) | \
 289                                 CSPR_PORT_SIZE_16 | \
 290                                 CSPR_MSEL_NOR | \
 291                                 CSPR_V)
 292 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 293 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 294                                 CSPR_PORT_SIZE_16 | \
 295                                 CSPR_MSEL_NOR | \
 296                                 CSPR_V)
 297 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 298 /* NOR Flash Timing Params */
 299 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 300 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 301                                 FTIM0_NOR_TEADC(0x5) | \
 302                                 FTIM0_NOR_TEAHC(0x5))
 303 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 304                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 305                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 306 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 307                                 FTIM2_NOR_TCH(0x4) | \
 308                                 FTIM2_NOR_TWPH(0x0E) | \
 309                                 FTIM2_NOR_TWP(0x1c))
 310 #define CONFIG_SYS_NOR_FTIM3    0x0
 311
 312 #define CONFIG_SYS_FLASH_QUIET_TEST
 313 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 314
 315 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 316 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 317 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 318 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 319
 320 #define CONFIG_SYS_FLASH_EMPTY_INFO
 321 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 322                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 323 #define CONFIG_FSL_QIXIS        /* use common QIXIS code */
 324 #define QIXIS_BASE              0xffdf0000
 325 #ifdef CONFIG_PHYS_64BIT
 326 #define QIXIS_BASE_PHYS         (0xf00000000ull | QIXIS_BASE)
 327 #else
 328 #define QIXIS_BASE_PHYS         QIXIS_BASE
 329 #endif
 330 #define QIXIS_LBMAP_SWITCH              0x06
 331 #define QIXIS_LBMAP_MASK                0x0f
 332 #define QIXIS_LBMAP_SHIFT               0
 333 #define QIXIS_LBMAP_DFLTBANK            0x00
 334 #define QIXIS_LBMAP_ALTBANK             0x04
 335 #define QIXIS_RST_CTL_RESET             0x31
 336 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 337 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 338 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 339 #define QIXIS_RST_FORCE_MEM             0x01
 340
 341 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 342 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
 343                                 | CSPR_PORT_SIZE_8 \
 344                                 | CSPR_MSEL_GPCM \
 345                                 | CSPR_V)
 346 #define CONFIG_SYS_AMASK3       IFC_AMASK(4*1024)
 347 #define CONFIG_SYS_CSOR3        0x0
 348 /* QIXIS Timing parameters for IFC CS3 */
 349 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 350                                         FTIM0_GPCM_TEADC(0x0e) | \
 351                                         FTIM0_GPCM_TEAHC(0x0e))
 352 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0xff) | \
 353                                         FTIM1_GPCM_TRAD(0x3f))
 354 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 355                                         FTIM2_GPCM_TCH(0x8) | \
 356                                         FTIM2_GPCM_TWP(0x1f))
 357 #define CONFIG_SYS_CS3_FTIM3            0x0
 358
 359 #define CONFIG_NAND_FSL_IFC
 360 #define CONFIG_SYS_NAND_BASE            0xff800000
 361 #ifdef CONFIG_PHYS_64BIT
 362 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 363 #else
 364 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 365 #endif
 366 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 367 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 368                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 369                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 370                                 | CSPR_V)
 371 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 372
 373 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 374                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 375                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 376                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 377                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 378                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
 379                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 380
 381 #define CONFIG_SYS_NAND_ONFI_DETECTION
 382
 383 /* ONFI NAND Flash mode0 Timing Params */
 384 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 385                                         FTIM0_NAND_TWP(0x18)   | \
 386                                         FTIM0_NAND_TWCHT(0x07) | \
 387                                         FTIM0_NAND_TWH(0x0a))
 388 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 389                                         FTIM1_NAND_TWBE(0x39)  | \
 390                                         FTIM1_NAND_TRR(0x0e)   | \
 391                                         FTIM1_NAND_TRP(0x18))
 392 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 393                                         FTIM2_NAND_TREH(0x0a) | \
 394                                         FTIM2_NAND_TWHRE(0x1e))
 395 #define CONFIG_SYS_NAND_FTIM3           0x0
 396
 397 #define CONFIG_SYS_NAND_DDR_LAW         11
 398 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 399 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 400 #define CONFIG_CMD_NAND
 401
 402 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 403
 404 #if defined(CONFIG_NAND)
 405 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 406 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 407 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 408 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 409 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 410 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 411 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 412 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 413 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 414 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR0_CSPR
 415 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 416 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 417 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 418 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 419 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 420 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 421 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 422 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR1_CSPR
 423 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 424 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 425 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 426 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 427 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 428 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 429 #else
 430 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 431 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 432 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 433 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 434 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 435 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 436 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 437 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 438 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 439 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR
 440 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 441 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 442 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 443 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 444 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 445 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 446 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 447 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 448 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 449 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 450 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 451 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 452 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 453 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 454 #endif
 455
 456 #ifdef CONFIG_SPL_BUILD
 457 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SPL_TEXT_BASE
 458 #else
 459 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 460 #endif
 461
 462 #if defined(CONFIG_RAMBOOT_PBL)
 463 #define CONFIG_SYS_RAMBOOT
 464 #endif
 465
 466 #define CONFIG_BOARD_EARLY_INIT_R
 467 #define CONFIG_MISC_INIT_R
 468
 469 #define CONFIG_HWCONFIG
 470
 471 /* define to use L1 as initial stack */
 472 #define CONFIG_L1_INIT_RAM
 473 #define CONFIG_SYS_INIT_RAM_LOCK
 474 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 475 #ifdef CONFIG_PHYS_64BIT
 476 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 477 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 478 /* The assembler doesn't like typecast */
 479 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 480         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 481           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 482 #else
 483 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   0xfe03c000 /* Initial L1 address */
 484 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 485 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 486 #endif
 487 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 488
 489 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 490                                         GENERATED_GBL_DATA_SIZE)
 491 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 492
 493 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 494 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
 495
 496 /* Serial Port */
 497 #define CONFIG_CONS_INDEX       1
 498 #define CONFIG_SYS_NS16550_SERIAL
 499 #define CONFIG_SYS_NS16550_REG_SIZE     1
 500 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 501
 502 #define CONFIG_SYS_BAUDRATE_TABLE       \
 503         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 504
 505 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 506 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 507 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 508 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 509 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    /* determine from environment */
 510
 511 /* Use the HUSH parser */
 512 #define CONFIG_SYS_HUSH_PARSER
 513 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 514
 515 /* Video */
 516 #ifdef CONFIG_PPC_T1024         /* no DIU on T1023 */
 517 #define CONFIG_FSL_DIU_FB
 518 #ifdef CONFIG_FSL_DIU_FB
 519 #define CONFIG_FSL_DIU_CH7301
 520 #define CONFIG_SYS_DIU_ADDR     (CONFIG_SYS_CCSRBAR + 0x180000)
 521 #define CONFIG_VIDEO
 522 #define CONFIG_CMD_BMP
 523 #define CONFIG_CFB_CONSOLE
 524 #define CONFIG_VIDEO_SW_CURSOR
 525 #define CONFIG_VGA_AS_SINGLE_DEVICE
 526 #define CONFIG_VIDEO_LOGO
 527 #define CONFIG_VIDEO_BMP_LOGO
 528 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
 529 /*
 530  * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so
 531  * disable empty flash sector detection, which is I/O-intensive.
 532  */
 533 #undef CONFIG_SYS_FLASH_EMPTY_INFO
 534 #endif
 535 #endif
 536
 537 /* pass open firmware flat tree */
 538 #define CONFIG_OF_LIBFDT
 539 #define CONFIG_OF_BOARD_SETUP
 540 #define CONFIG_OF_STDOUT_VIA_ALIAS
 541
 542 /* new uImage format support */
 543 #define CONFIG_FIT
 544 #define CONFIG_FIT_VERBOSE      /* enable fit_format_{error,warning}() */
 545
 546 /* I2C */
 547 #define CONFIG_SYS_I2C
 548 #define CONFIG_SYS_I2C_FSL              /* Use FSL common I2C driver */
 549 #define CONFIG_SYS_FSL_I2C_SPEED        50000   /* I2C speed in Hz */
 550 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 551 #define CONFIG_SYS_FSL_I2C2_SPEED       50000   /* I2C speed in Hz */
 552 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 553 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 554 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 555
 556 #define I2C_MUX_PCA_ADDR                0x77
 557 #define I2C_MUX_PCA_ADDR_PRI            0x77 /* Primary Mux*/
 558 #define I2C_MUX_PCA_ADDR_SEC            0x76 /* Secondary multiplexer */
 559 #define I2C_RETIMER_ADDR                0x18
 560
 561 /* I2C bus multiplexer */
 562 #define I2C_MUX_CH_DEFAULT      0x8
 563 #define I2C_MUX_CH_DIU          0xC
 564 #define I2C_MUX_CH5             0xD
 565 #define I2C_MUX_CH7             0xF
 566
 567 /* LDI/DVI Encoder for display */
 568 #define CONFIG_SYS_I2C_LDI_ADDR  0x38
 569 #define CONFIG_SYS_I2C_DVI_ADDR  0x75
 570
 571 /*
 572  * RTC configuration
 573  */
 574 #define RTC
 575 #define CONFIG_RTC_DS3231       1
 576 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
 577
 578 /*
 579  * eSPI - Enhanced SPI
 580  */
 581 #ifndef CONFIG_SPL_BUILD
 582 #endif
 583 #define CONFIG_CMD_SF
 584 #define CONFIG_SPI_FLASH_BAR
 585 #define CONFIG_SF_DEFAULT_SPEED  10000000
 586 #define CONFIG_SF_DEFAULT_MODE    0
 587
 588 /*
 589  * General PCIe
 590  * Memory space is mapped 1-1, but I/O space must start from 0.
 591  */
 592 #define CONFIG_PCI              /* Enable PCI/PCIE */
 593 #define CONFIG_PCIE1            /* PCIE controler 1 */
 594 #define CONFIG_PCIE2            /* PCIE controler 2 */
 595 #define CONFIG_PCIE3            /* PCIE controler 3 */
 596 #define CONFIG_FSL_PCI_INIT     /* Use common FSL init code */
 597 #define CONFIG_SYS_PCI_64BIT    /* enable 64-bit PCI resources */
 598 #define CONFIG_PCI_INDIRECT_BRIDGE
 599
 600 #ifdef CONFIG_PCI
 601 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 602 #ifdef CONFIG_PCIE1
 603 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 604 #ifdef CONFIG_PHYS_64BIT
 605 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 606 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 607 #else
 608 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 609 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 610 #endif
 611 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000      /* 256M */
 612 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 613 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 614 #ifdef CONFIG_PHYS_64BIT
 615 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 616 #else
 617 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
 618 #endif
 619 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 620 #endif
 621
 622 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 623 #ifdef CONFIG_PCIE2
 624 #define CONFIG_SYS_PCIE2_MEM_VIRT       0x90000000
 625 #ifdef CONFIG_PHYS_64BIT
 626 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 627 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc10000000ull
 628 #else
 629 #define CONFIG_SYS_PCIE2_MEM_BUS        0x90000000
 630 #define CONFIG_SYS_PCIE2_MEM_PHYS       0x90000000
 631 #endif
 632 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000      /* 256M */
 633 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 634 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 635 #ifdef CONFIG_PHYS_64BIT
 636 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 637 #else
 638 #define CONFIG_SYS_PCIE2_IO_PHYS        0xf8010000
 639 #endif
 640 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 641 #endif
 642
 643 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 644 #ifdef CONFIG_PCIE3
 645 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xa0000000
 646 #ifdef CONFIG_PHYS_64BIT
 647 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 648 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc20000000ull
 649 #else
 650 #define CONFIG_SYS_PCIE3_MEM_BUS        0xa0000000
 651 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xa0000000
 652 #endif
 653 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x10000000      /* 256M */
 654 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 655 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 656 #ifdef CONFIG_PHYS_64BIT
 657 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 658 #else
 659 #define CONFIG_SYS_PCIE3_IO_PHYS        0xf8020000
 660 #endif
 661 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 662 #endif
 663
 664 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 665 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 666 #define CONFIG_DOS_PARTITION
 667 #endif  /* CONFIG_PCI */
 668
 669 /*
 670  *SATA
 671  */
 672 #define CONFIG_FSL_SATA_V2
 673 #ifdef CONFIG_FSL_SATA_V2
 674 #define CONFIG_LIBATA
 675 #define CONFIG_FSL_SATA
 676 #define CONFIG_SYS_SATA_MAX_DEVICE      1
 677 #define CONFIG_SATA1
 678 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 679 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 680 #define CONFIG_LBA48
 681 #define CONFIG_CMD_SATA
 682 #define CONFIG_DOS_PARTITION
 683 #define CONFIG_CMD_EXT2
 684 #endif
 685
 686 /*
 687  * USB
 688  */
 689 #define CONFIG_HAS_FSL_DR_USB
 690
 691 #ifdef CONFIG_HAS_FSL_DR_USB
 692 #define CONFIG_USB_EHCI
 693 #define CONFIG_CMD_USB
 694 #define CONFIG_USB_STORAGE
 695 #define CONFIG_USB_EHCI_FSL
 696 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 697 #define CONFIG_CMD_EXT2
 698 #endif
 699
 700 /*
 701  * SDHC
 702  */
 703 #define CONFIG_MMC
 704 #ifdef CONFIG_MMC
 705 #define CONFIG_FSL_ESDHC
 706 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 707 #define CONFIG_CMD_MMC
 708 #define CONFIG_GENERIC_MMC
 709 #define CONFIG_CMD_EXT2
 710 #define CONFIG_CMD_FAT
 711 #define CONFIG_DOS_PARTITION
 712 #endif
 713
 714 /* Qman/Bman */
 715 #ifndef CONFIG_NOBQFMAN
 716 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 717 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 718 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 719 #ifdef CONFIG_PHYS_64BIT
 720 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 721 #else
 722 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 723 #endif
 724 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 725 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 726 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 727 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 728 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 729 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 730                                         CONFIG_SYS_BMAN_CENA_SIZE)
 731 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 732 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 733 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 734 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 735 #ifdef CONFIG_PHYS_64BIT
 736 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 737 #else
 738 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 739 #endif
 740 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 741 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 742 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 743 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 744 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 745 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 746                                         CONFIG_SYS_QMAN_CENA_SIZE)
 747 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 748 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 749
 750 #define CONFIG_SYS_DPAA_FMAN
 751
 752 #define CONFIG_QE
 753 #define CONFIG_U_QE
 754 /* Default address of microcode for the Linux FMan driver */
 755 #if defined(CONFIG_SPIFLASH)
 756 /*
 757  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 758  * env, so we got 0x110000.
 759  */
 760 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 761 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 762 #define CONFIG_SYS_QE_FW_ADDR   0x130000
 763 #elif defined(CONFIG_SDCARD)
 764 /*
 765  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 766  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 767  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080(0x820).
 768  */
 769 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 770 #define CONFIG_SYS_FMAN_FW_ADDR         (512 * 0x820)
 771 #define CONFIG_SYS_QE_FW_ADDR           (512 * 0x920)
 772 #elif defined(CONFIG_NAND)
 773 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 774 #define CONFIG_SYS_FMAN_FW_ADDR         (11 * CONFIG_SYS_NAND_BLOCK_SIZE)
 775 #define CONFIG_SYS_QE_FW_ADDR           (12 * CONFIG_SYS_NAND_BLOCK_SIZE)
 776 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 777 /*
 778  * Slave has no ucode locally, it can fetch this from remote. When implementing
 779  * in two corenet boards, slave's ucode could be stored in master's memory
 780  * space, the address can be mapped from slave TLB->slave LAW->
 781  * slave SRIO or PCIE outbound window->master inbound window->
 782  * master LAW->the ucode address in master's memory space.
 783  */
 784 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 785 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000
 786 #else
 787 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 788 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 789 #define CONFIG_SYS_QE_FW_ADDR           0xEFE00000
 790 #endif
 791 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 792 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 793 #endif /* CONFIG_NOBQFMAN */
 794
 795 #ifdef CONFIG_SYS_DPAA_FMAN
 796 #define CONFIG_FMAN_ENET
 797 #define CONFIG_PHYLIB_10G
 798 #define CONFIG_PHY_VITESSE
 799 #define CONFIG_PHY_REALTEK
 800 #define CONFIG_PHY_TERANETICS
 801 #define RGMII_PHY1_ADDR         0x1
 802 #define RGMII_PHY2_ADDR         0x2
 803 #define SGMII_CARD_AQ_PHY_ADDR_S3 0x3
 804 #define SGMII_CARD_AQ_PHY_ADDR_S4 0x4
 805 #define SGMII_CARD_AQ_PHY_ADDR_S5 0x5
 806 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
 807 #define SGMII_CARD_PORT2_PHY_ADDR 0x1D
 808 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
 809 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F
 810 #endif
 811
 812 #ifdef CONFIG_FMAN_ENET
 813 #define CONFIG_MII              /* MII PHY management */
 814 #define CONFIG_ETHPRIME         "FM1@DTSEC4"
 815 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 816 #endif
 817
 818 /*
 819  * Dynamic MTD Partition support with mtdparts
 820  */
 821 #ifndef CONFIG_SYS_NO_FLASH
 822 #define CONFIG_MTD_DEVICE
 823 #define CONFIG_MTD_PARTITIONS
 824 #define CONFIG_CMD_MTDPARTS
 825 #define CONFIG_FLASH_CFI_MTD
 826 #define MTDIDS_DEFAULT    "nor0=fe8000000.nor,nand0=fff800000.flash," \
 827                           "spi0=spife110000.0"
 828 #define MTDPARTS_DEFAULT  "mtdparts=fe8000000.nor:1m(uboot),5m(kernel)," \
 829                           "128k(dtb),96m(fs),-(user);"\
 830                           "fff800000.flash:2m(uboot),9m(kernel),"\
 831                           "128k(dtb),96m(fs),-(user);spife110000.0:" \
 832                           "2m(uboot),9m(kernel),128k(dtb),-(user)"
 833 #endif
 834
 835 /*
 836  * Environment
 837  */
 838 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 839 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 840
 841 /*
 842  * Command line configuration.
 843  */
 844 #define CONFIG_CMD_DATE
 845 #define CONFIG_CMD_DHCP
 846 #define CONFIG_CMD_EEPROM
 847 #define CONFIG_CMD_ERRATA
 848 #define CONFIG_CMD_GREPENV
 849 #define CONFIG_CMD_IRQ
 850 #define CONFIG_CMD_I2C
 851 #define CONFIG_CMD_MII
 852 #define CONFIG_CMD_PING
 853 #define CONFIG_CMD_REGINFO
 854
 855 #ifdef CONFIG_PCI
 856 #define CONFIG_CMD_PCI
 857 #endif
 858
 859 /*
 860  * Miscellaneous configurable options
 861  */
 862 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 863 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 864 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 865 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 866 #ifdef CONFIG_CMD_KGDB
 867 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 868 #else
 869 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 870 #endif
 871 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 872 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 873 #define CONFIG_SYS_BARGSIZE  CONFIG_SYS_CBSIZE  /* Boot Argument Buffer Size */
 874
 875 /*
 876  * For booting Linux, the board info and command line data
 877  * have to be in the first 64 MB of memory, since this is
 878  * the maximum mapped by the Linux kernel during initialization.
 879  */
 880 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 881 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 882
 883 #ifdef CONFIG_CMD_KGDB
 884 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 885 #endif
 886
 887 /*
 888  * Environment Configuration
 889  */
 890 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 891 #define CONFIG_BOOTFILE         "uImage"
 892 #define CONFIG_UBOOTPATH        "u-boot.bin" /* U-Boot image on TFTP server */
 893 #define CONFIG_LOADADDR         1000000 /* default location for tftp, bootm */
 894 #define CONFIG_BOOTDELAY        10      /* -1 disables auto-boot */
 895 #define CONFIG_BAUDRATE         115200
 896 #define __USB_PHY_TYPE          utmi
 897
 898
 899 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 900         "hwconfig=fsl_ddr:ctlr_intlv=cacheline,bank_intlv=cs0_cs1;\0"  \
 901         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0" \
 902         "bootargs=root=/dev/ram rw console=ttyS0,115200\0" \
 903         "ramdiskfile=t1024qds/ramdisk.uboot\0"                  \
 904         "fdtfile=t1024qds/t1024qds.dtb\0"                       \
 905         "netdev=eth0\0"                                         \
 906         "video-mode=fslfb:1024x768-32@60,monitor=dvi\0"         \
 907         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 908         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 909         "tftpflash=tftpboot $loadaddr $uboot && "               \
 910         "protect off $ubootaddr +$filesize && "                 \
 911         "erase $ubootaddr +$filesize && "                       \
 912         "cp.b $loadaddr $ubootaddr $filesize && "               \
 913         "protect on $ubootaddr +$filesize && "                  \
 914         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 915         "consoledev=ttyS0\0"                                    \
 916         "ramdiskaddr=2000000\0"                                 \
 917         "fdtaddr=d00000\0"                                      \
 918         "bdev=sda3\0"
 919
 920 #define CONFIG_LINUX                                    \
 921         "setenv bootargs root=/dev/ram rw "             \
 922         "console=$consoledev,$baudrate $othbootargs;"   \
 923         "setenv ramdiskaddr 0x02000000;"                \
 924         "setenv fdtaddr 0x00c00000;"                    \
 925         "setenv loadaddr 0x1000000;"                    \
 926         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 927
 928 #define CONFIG_NFSBOOTCOMMAND                   \
 929         "setenv bootargs root=/dev/nfs rw "     \
 930         "nfsroot=$serverip:$rootpath "          \
 931         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 932         "console=$consoledev,$baudrate $othbootargs;"   \
 933         "tftp $loadaddr $bootfile;"             \
 934         "tftp $fdtaddr $fdtfile;"               \
 935         "bootm $loadaddr - $fdtaddr"
 936
 937 #define CONFIG_BOOTCOMMAND      CONFIG_LINUX
 938
 939 #ifdef CONFIG_SECURE_BOOT
 940 #include <asm/fsl_secure_boot.h>
 941 #endif
 942
 943 #endif  /* __T1024QDS_H */