include/configs/T102xRDB.h

   1 /*
   2  * Copyright 2014 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * T1024/T1023 RDB board configuration file
   9  */
  10
  11 #ifndef __T1024RDB_H
  12 #define __T1024RDB_H
  13
  14 /* High Level Configuration Options */
  15 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  16 #define CONFIG_MP                       /* support multiple processors */
  17 #define CONFIG_ENABLE_36BIT_PHYS
  18
  19 #ifdef CONFIG_PHYS_64BIT
  20 #define CONFIG_ADDR_MAP         1
  21 #define CONFIG_SYS_NUM_ADDR_MAP 64      /* number of TLB1 entries */
  22 #endif
  23
  24 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  25 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
  26 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
  27
  28 #define CONFIG_ENV_OVERWRITE
  29
  30 #define CONFIG_FSL_CAAM                 /* Enable SEC/CAAM */
  31
  32 /* support deep sleep */
  33 #ifdef CONFIG_ARCH_T1024
  34 #define CONFIG_DEEP_SLEEP
  35 #endif
  36 #if defined(CONFIG_DEEP_SLEEP)
  37 #define CONFIG_BOARD_EARLY_INIT_F
  38 #endif
  39
  40 #ifdef CONFIG_RAMBOOT_PBL
  41 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xrdb/t1024_pbi.cfg
  42 #define CONFIG_SPL_FLUSH_IMAGE
  43 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  44 #define CONFIG_SYS_TEXT_BASE            0x30001000
  45 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
  46 #define CONFIG_SPL_PAD_TO               0x40000
  47 #define CONFIG_SPL_MAX_SIZE             0x28000
  48 #define RESET_VECTOR_OFFSET             0x27FFC
  49 #define BOOT_PAGE_OFFSET                0x27000
  50 #ifdef CONFIG_SPL_BUILD
  51 #define CONFIG_SPL_SKIP_RELOCATE
  52 #define CONFIG_SPL_COMMON_INIT_DDR
  53 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  54 #define CONFIG_SYS_NO_FLASH
  55 #endif
  56
  57 #ifdef CONFIG_NAND
  58 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  59 #define CONFIG_SYS_NAND_U_BOOT_DST      0x30000000
  60 #define CONFIG_SYS_NAND_U_BOOT_START    0x30000000
  61 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
  62 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  63 #if defined(CONFIG_TARGET_T1024RDB)
  64 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1024_nand_rcw.cfg
  65 #elif defined(CONFIG_TARGET_T1023RDB)
  66 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1023_nand_rcw.cfg
  67 #endif
  68 #define CONFIG_SPL_NAND_BOOT
  69 #endif
  70
  71 #ifdef CONFIG_SPIFLASH
  72 #define CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
  73 #define CONFIG_SPL_SPI_FLASH_MINIMAL
  74 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (768 << 10)
  75 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x30000000)
  76 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x30000000)
  77 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (256 << 10)
  78 #define CONFIG_SYS_LDSCRIPT             "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  79 #ifndef CONFIG_SPL_BUILD
  80 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  81 #endif
  82 #if defined(CONFIG_TARGET_T1024RDB)
  83 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1024_spi_rcw.cfg
  84 #elif defined(CONFIG_TARGET_T1023RDB)
  85 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1023_spi_rcw.cfg
  86 #endif
  87 #define CONFIG_SPL_SPI_BOOT
  88 #endif
  89
  90 #ifdef CONFIG_SDCARD
  91 #define CONFIG_RESET_VECTOR_ADDRESS     0x30000FFC
  92 #define CONFIG_SPL_MMC_MINIMAL
  93 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
  94 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x30000000)
  95 #define CONFIG_SYS_MMC_U_BOOT_START     (0x30000000)
  96 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
  97 #define CONFIG_SYS_LDSCRIPT             "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  98 #ifndef CONFIG_SPL_BUILD
  99 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 100 #endif
 101 #if defined(CONFIG_TARGET_T1024RDB)
 102 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1024_sd_rcw.cfg
 103 #elif defined(CONFIG_TARGET_T1023RDB)
 104 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1023_sd_rcw.cfg
 105 #endif
 106 #define CONFIG_SPL_MMC_BOOT
 107 #endif
 108
 109 #endif /* CONFIG_RAMBOOT_PBL */
 110
 111 #ifndef CONFIG_SYS_TEXT_BASE
 112 #define CONFIG_SYS_TEXT_BASE    0xeff40000
 113 #endif
 114
 115 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 116 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
 117 #endif
 118
 119 #ifndef CONFIG_SYS_NO_FLASH
 120 #define CONFIG_FLASH_CFI_DRIVER
 121 #define CONFIG_SYS_FLASH_CFI
 122 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 123 #endif
 124
 125 /* PCIe Boot - Master */
 126 #define CONFIG_SRIO_PCIE_BOOT_MASTER
 127 /*
 128  * for slave u-boot IMAGE instored in master memory space,
 129  * PHYS must be aligned based on the SIZE
 130  */
 131 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
 132 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE     0x100000 /* 1M */
 133 #ifdef CONFIG_PHYS_64BIT
 134 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
 135 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
 136 #else
 137 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xef200000
 138 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0xfff00000
 139 #endif
 140 /*
 141  * for slave UCODE and ENV instored in master memory space,
 142  * PHYS must be aligned based on the SIZE
 143  */
 144 #ifdef CONFIG_PHYS_64BIT
 145 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
 146 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS  0x3ffe00000ull
 147 #else
 148 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xef100000
 149 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS  0xffe00000
 150 #endif
 151 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE    0x40000 /* 256K */
 152 /* slave core release by master*/
 153 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET        0xe00e4
 154 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK      0x00000001 /* release core 0 */
 155
 156 /* PCIe Boot - Slave */
 157 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 158 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 159 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 160                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 161 /* Set 1M boot space for PCIe boot */
 162 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
 163 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS       \
 164                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
 165 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
 166 #define CONFIG_SYS_NO_FLASH
 167 #endif
 168
 169 #if defined(CONFIG_SPIFLASH)
 170 #define CONFIG_SYS_EXTRA_ENV_RELOC
 171 #define CONFIG_ENV_IS_IN_SPI_FLASH
 172 #define CONFIG_ENV_SPI_BUS              0
 173 #define CONFIG_ENV_SPI_CS               0
 174 #define CONFIG_ENV_SPI_MAX_HZ           10000000
 175 #define CONFIG_ENV_SPI_MODE             0
 176 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 177 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 178 #if defined(CONFIG_TARGET_T1024RDB)
 179 #define CONFIG_ENV_SECT_SIZE            0x10000
 180 #elif defined(CONFIG_TARGET_T1023RDB)
 181 #define CONFIG_ENV_SECT_SIZE            0x40000
 182 #endif
 183 #elif defined(CONFIG_SDCARD)
 184 #define CONFIG_SYS_EXTRA_ENV_RELOC
 185 #define CONFIG_ENV_IS_IN_MMC
 186 #define CONFIG_SYS_MMC_ENV_DEV          0
 187 #define CONFIG_ENV_SIZE                 0x2000
 188 #define CONFIG_ENV_OFFSET               (512 * 0x800)
 189 #elif defined(CONFIG_NAND)
 190 #define CONFIG_SYS_EXTRA_ENV_RELOC
 191 #define CONFIG_ENV_IS_IN_NAND
 192 #define CONFIG_ENV_SIZE                 0x2000
 193 #if defined(CONFIG_TARGET_T1024RDB)
 194 #define CONFIG_ENV_OFFSET               (2 * CONFIG_SYS_NAND_BLOCK_SIZE)
 195 #elif defined(CONFIG_TARGET_T1023RDB)
 196 #define CONFIG_ENV_OFFSET               (10 * CONFIG_SYS_NAND_BLOCK_SIZE)
 197 #endif
 198 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 199 #define CONFIG_ENV_IS_IN_REMOTE
 200 #define CONFIG_ENV_ADDR         0xffe20000
 201 #define CONFIG_ENV_SIZE         0x2000
 202 #elif defined(CONFIG_ENV_IS_NOWHERE)
 203 #define CONFIG_ENV_SIZE         0x2000
 204 #else
 205 #define CONFIG_ENV_IS_IN_FLASH
 206 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 207 #define CONFIG_ENV_SIZE         0x2000
 208 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 209 #endif
 210
 211 #ifndef __ASSEMBLY__
 212 unsigned long get_board_sys_clk(void);
 213 unsigned long get_board_ddr_clk(void);
 214 #endif
 215
 216 #define CONFIG_SYS_CLK_FREQ     100000000
 217 #define CONFIG_DDR_CLK_FREQ     100000000
 218
 219 /*
 220  * These can be toggled for performance analysis, otherwise use default.
 221  */
 222 #define CONFIG_SYS_CACHE_STASHING
 223 #define CONFIG_BACKSIDE_L2_CACHE
 224 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
 225 #define CONFIG_BTB                      /* toggle branch predition */
 226 #define CONFIG_DDR_ECC
 227 #ifdef CONFIG_DDR_ECC
 228 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 229 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 230 #endif
 231
 232 #define CONFIG_SYS_MEMTEST_START        0x00200000 /* memtest works on */
 233 #define CONFIG_SYS_MEMTEST_END          0x00400000
 234 #define CONFIG_SYS_ALT_MEMTEST
 235 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 236
 237 /*
 238  *  Config the L3 Cache as L3 SRAM
 239  */
 240 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 241 #define CONFIG_SYS_L3_SIZE              (256 << 10)
 242 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
 243 #ifdef CONFIG_RAMBOOT_PBL
 244 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
 245 #endif
 246 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 247 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (30 << 10)
 248 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 249 #define CONFIG_SPL_RELOC_STACK_SIZE     (22 << 10)
 250
 251 #ifdef CONFIG_PHYS_64BIT
 252 #define CONFIG_SYS_DCSRBAR              0xf0000000
 253 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 254 #endif
 255
 256 /* EEPROM */
 257 #define CONFIG_ID_EEPROM
 258 #define CONFIG_SYS_I2C_EEPROM_NXID
 259 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 260 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50
 261 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  2
 262 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 263 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 264
 265 /*
 266  * DDR Setup
 267  */
 268 #define CONFIG_VERY_BIG_RAM
 269 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 270 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 271 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 272 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 273 #define CONFIG_FSL_DDR_INTERACTIVE
 274 #if defined(CONFIG_TARGET_T1024RDB)
 275 #define CONFIG_DDR_SPD
 276 #define CONFIG_SYS_SPD_BUS_NUM  0
 277 #define SPD_EEPROM_ADDRESS      0x51
 278 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 279 #elif defined(CONFIG_TARGET_T1023RDB)
 280 #define CONFIG_SYS_DDR_RAW_TIMING
 281 #define CONFIG_SYS_SDRAM_SIZE   2048
 282 #endif
 283
 284 /*
 285  * IFC Definitions
 286  */
 287 #define CONFIG_SYS_FLASH_BASE   0xe8000000
 288 #ifdef CONFIG_PHYS_64BIT
 289 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 290 #else
 291 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 292 #endif
 293
 294 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 295 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 296                                 CSPR_PORT_SIZE_16 | \
 297                                 CSPR_MSEL_NOR | \
 298                                 CSPR_V)
 299 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 300
 301 /* NOR Flash Timing Params */
 302 #if defined(CONFIG_TARGET_T1024RDB)
 303 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 304 #elif defined(CONFIG_TARGET_T1023RDB)
 305 #define CONFIG_SYS_NOR_CSOR    (CSOR_NOR_ADM_SHIFT(0) | \
 306                                 CSOR_NAND_TRHZ_80 | CSOR_NOR_ADM_SHFT_MODE_EN)
 307 #endif
 308 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 309                                 FTIM0_NOR_TEADC(0x5) | \
 310                                 FTIM0_NOR_TEAHC(0x5))
 311 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 312                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 313                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 314 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 315                                 FTIM2_NOR_TCH(0x4) | \
 316                                 FTIM2_NOR_TWPH(0x0E) | \
 317                                 FTIM2_NOR_TWP(0x1c))
 318 #define CONFIG_SYS_NOR_FTIM3    0x0
 319
 320 #define CONFIG_SYS_FLASH_QUIET_TEST
 321 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 322
 323 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 324 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 325 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 326 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 327
 328 #define CONFIG_SYS_FLASH_EMPTY_INFO
 329 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 330
 331 #ifdef CONFIG_TARGET_T1024RDB
 332 /* CPLD on IFC */
 333 #define CONFIG_SYS_CPLD_BASE            0xffdf0000
 334 #define CONFIG_SYS_CPLD_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
 335 #define CONFIG_SYS_CSPR2_EXT            (0xf)
 336 #define CONFIG_SYS_CSPR2                (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE) \
 337                                                 | CSPR_PORT_SIZE_8 \
 338                                                 | CSPR_MSEL_GPCM \
 339                                                 | CSPR_V)
 340 #define CONFIG_SYS_AMASK2               IFC_AMASK(64*1024)
 341 #define CONFIG_SYS_CSOR2                0x0
 342
 343 /* CPLD Timing parameters for IFC CS2 */
 344 #define CONFIG_SYS_CS2_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 345                                                 FTIM0_GPCM_TEADC(0x0e) | \
 346                                                 FTIM0_GPCM_TEAHC(0x0e))
 347 #define CONFIG_SYS_CS2_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 348                                                 FTIM1_GPCM_TRAD(0x1f))
 349 #define CONFIG_SYS_CS2_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 350                                                 FTIM2_GPCM_TCH(0x8) | \
 351                                                 FTIM2_GPCM_TWP(0x1f))
 352 #define CONFIG_SYS_CS2_FTIM3            0x0
 353 #endif
 354
 355 /* NAND Flash on IFC */
 356 #define CONFIG_NAND_FSL_IFC
 357 #define CONFIG_SYS_NAND_BASE            0xff800000
 358 #ifdef CONFIG_PHYS_64BIT
 359 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 360 #else
 361 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 362 #endif
 363 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 364 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 365                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 366                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 367                                 | CSPR_V)
 368 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 369
 370 #if defined(CONFIG_TARGET_T1024RDB)
 371 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 372                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 373                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 374                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 375                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 376                                 | CSOR_NAND_SPRZ_224    /* Spare size = 224 */ \
 377                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 378 #define CONFIG_SYS_NAND_BLOCK_SIZE      (512 * 1024)
 379 #elif defined(CONFIG_TARGET_T1023RDB)
 380 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 381                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 382                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 383                                 | CSOR_NAND_RAL_3       /* RAL 3Bytes */ \
 384                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 385                                 | CSOR_NAND_SPRZ_128    /* Spare size = 128 */ \
 386                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 387 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 388 #endif
 389
 390 #define CONFIG_SYS_NAND_ONFI_DETECTION
 391 /* ONFI NAND Flash mode0 Timing Params */
 392 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 393                                         FTIM0_NAND_TWP(0x18)   | \
 394                                         FTIM0_NAND_TWCHT(0x07) | \
 395                                         FTIM0_NAND_TWH(0x0a))
 396 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 397                                         FTIM1_NAND_TWBE(0x39)  | \
 398                                         FTIM1_NAND_TRR(0x0e)   | \
 399                                         FTIM1_NAND_TRP(0x18))
 400 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 401                                         FTIM2_NAND_TREH(0x0a) | \
 402                                         FTIM2_NAND_TWHRE(0x1e))
 403 #define CONFIG_SYS_NAND_FTIM3           0x0
 404
 405 #define CONFIG_SYS_NAND_DDR_LAW         11
 406 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 407 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 408 #define CONFIG_CMD_NAND
 409
 410 #if defined(CONFIG_NAND)
 411 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 412 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 413 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 414 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 415 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 416 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 417 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 418 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 419 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 420 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR0_CSPR
 421 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 422 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 423 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 424 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 425 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 426 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 427 #else
 428 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 429 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 430 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 431 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 432 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 433 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 434 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 435 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 436 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NAND_CSPR_EXT
 437 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 438 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 439 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 440 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 441 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 442 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 443 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 444 #endif
 445
 446 #ifdef CONFIG_SPL_BUILD
 447 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SPL_TEXT_BASE
 448 #else
 449 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 450 #endif
 451
 452 #if defined(CONFIG_RAMBOOT_PBL)
 453 #define CONFIG_SYS_RAMBOOT
 454 #endif
 455
 456 #define CONFIG_BOARD_EARLY_INIT_R
 457 #define CONFIG_MISC_INIT_R
 458
 459 #define CONFIG_HWCONFIG
 460
 461 /* define to use L1 as initial stack */
 462 #define CONFIG_L1_INIT_RAM
 463 #define CONFIG_SYS_INIT_RAM_LOCK
 464 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 465 #ifdef CONFIG_PHYS_64BIT
 466 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 467 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 468 /* The assembler doesn't like typecast */
 469 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 470         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 471           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 472 #else
 473 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   0xfe03c000 /* Initial L1 address */
 474 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 475 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 476 #endif
 477 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 478
 479 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 480                                         GENERATED_GBL_DATA_SIZE)
 481 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 482
 483 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 484 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
 485
 486 /* Serial Port */
 487 #define CONFIG_CONS_INDEX       1
 488 #define CONFIG_SYS_NS16550_SERIAL
 489 #define CONFIG_SYS_NS16550_REG_SIZE     1
 490 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 491
 492 #define CONFIG_SYS_BAUDRATE_TABLE       \
 493         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 494
 495 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 496 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 497 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 498 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 499
 500 /* Video */
 501 #undef CONFIG_FSL_DIU_FB        /* RDB doesn't support DIU */
 502 #ifdef CONFIG_FSL_DIU_FB
 503 #define CONFIG_SYS_DIU_ADDR     (CONFIG_SYS_CCSRBAR + 0x180000)
 504 #define CONFIG_CMD_BMP
 505 #define CONFIG_VIDEO_LOGO
 506 #define CONFIG_VIDEO_BMP_LOGO
 507 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
 508 /*
 509  * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so
 510  * disable empty flash sector detection, which is I/O-intensive.
 511  */
 512 #undef CONFIG_SYS_FLASH_EMPTY_INFO
 513 #endif
 514
 515 /* I2C */
 516 #define CONFIG_SYS_I2C
 517 #define CONFIG_SYS_I2C_FSL              /* Use FSL common I2C driver */
 518 #define CONFIG_SYS_FSL_I2C_SPEED        50000   /* I2C speed in Hz */
 519 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 520 #define CONFIG_SYS_FSL_I2C2_SPEED       50000   /* I2C speed in Hz */
 521 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 522 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 523 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 524
 525 #define I2C_PCA6408_BUS_NUM             1
 526 #define I2C_PCA6408_ADDR                0x20
 527
 528 /* I2C bus multiplexer */
 529 #define I2C_MUX_CH_DEFAULT      0x8
 530
 531 /*
 532  * RTC configuration
 533  */
 534 #define RTC
 535 #define CONFIG_RTC_DS1337       1
 536 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
 537
 538 /*
 539  * eSPI - Enhanced SPI
 540  */
 541 #define CONFIG_SPI_FLASH_BAR
 542 #define CONFIG_SF_DEFAULT_SPEED 10000000
 543 #define CONFIG_SF_DEFAULT_MODE  0
 544
 545 /*
 546  * General PCIe
 547  * Memory space is mapped 1-1, but I/O space must start from 0.
 548  */
 549 #define CONFIG_PCIE1            /* PCIE controller 1 */
 550 #define CONFIG_PCIE2            /* PCIE controller 2 */
 551 #define CONFIG_PCIE3            /* PCIE controller 3 */
 552 #ifdef CONFIG_ARCH_T1040
 553 #define CONFIG_PCIE4            /* PCIE controller 4 */
 554 #endif
 555 #define CONFIG_FSL_PCI_INIT     /* Use common FSL init code */
 556 #define CONFIG_SYS_PCI_64BIT    /* enable 64-bit PCI resources */
 557 #define CONFIG_PCI_INDIRECT_BRIDGE
 558
 559 #ifdef CONFIG_PCI
 560 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 561 #ifdef CONFIG_PCIE1
 562 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 563 #ifdef CONFIG_PHYS_64BIT
 564 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 565 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 566 #else
 567 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 568 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 569 #endif
 570 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000      /* 256M */
 571 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 572 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 573 #ifdef CONFIG_PHYS_64BIT
 574 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 575 #else
 576 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
 577 #endif
 578 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 579 #endif
 580
 581 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 582 #ifdef CONFIG_PCIE2
 583 #define CONFIG_SYS_PCIE2_MEM_VIRT       0x90000000
 584 #ifdef CONFIG_PHYS_64BIT
 585 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 586 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc10000000ull
 587 #else
 588 #define CONFIG_SYS_PCIE2_MEM_BUS        0x90000000
 589 #define CONFIG_SYS_PCIE2_MEM_PHYS       0x90000000
 590 #endif
 591 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000      /* 256M */
 592 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 593 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 594 #ifdef CONFIG_PHYS_64BIT
 595 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 596 #else
 597 #define CONFIG_SYS_PCIE2_IO_PHYS        0xf8010000
 598 #endif
 599 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 600 #endif
 601
 602 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 603 #ifdef CONFIG_PCIE3
 604 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xa0000000
 605 #ifdef CONFIG_PHYS_64BIT
 606 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 607 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc20000000ull
 608 #else
 609 #define CONFIG_SYS_PCIE3_MEM_BUS        0xa0000000
 610 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xa0000000
 611 #endif
 612 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x10000000      /* 256M */
 613 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 614 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 615 #ifdef CONFIG_PHYS_64BIT
 616 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 617 #else
 618 #define CONFIG_SYS_PCIE3_IO_PHYS        0xf8020000
 619 #endif
 620 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 621 #endif
 622
 623 /* controller 4, Base address 203000, to be removed */
 624 #ifdef CONFIG_PCIE4
 625 #define CONFIG_SYS_PCIE4_MEM_VIRT       0xb0000000
 626 #ifdef CONFIG_PHYS_64BIT
 627 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 628 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc30000000ull
 629 #else
 630 #define CONFIG_SYS_PCIE4_MEM_BUS        0xb0000000
 631 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xb0000000
 632 #endif
 633 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x10000000      /* 256M */
 634 #define CONFIG_SYS_PCIE4_IO_VIRT        0xf8030000
 635 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 636 #ifdef CONFIG_PHYS_64BIT
 637 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 638 #else
 639 #define CONFIG_SYS_PCIE4_IO_PHYS        0xf8030000
 640 #endif
 641 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 642 #endif
 643
 644 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 645 #define CONFIG_DOS_PARTITION
 646 #endif  /* CONFIG_PCI */
 647
 648 /*
 649  * USB
 650  */
 651 #define CONFIG_HAS_FSL_DR_USB
 652
 653 #ifdef CONFIG_HAS_FSL_DR_USB
 654 #define CONFIG_USB_EHCI
 655 #define CONFIG_USB_EHCI_FSL
 656 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 657 #endif
 658
 659 /*
 660  * SDHC
 661  */
 662 #ifdef CONFIG_MMC
 663 #define CONFIG_FSL_ESDHC
 664 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 665 #define CONFIG_GENERIC_MMC
 666 #define CONFIG_DOS_PARTITION
 667 #endif
 668
 669 /* Qman/Bman */
 670 #ifndef CONFIG_NOBQFMAN
 671 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 672 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 673 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 674 #ifdef CONFIG_PHYS_64BIT
 675 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 676 #else
 677 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 678 #endif
 679 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 680 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 681 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 682 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 683 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 684 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 685                                         CONFIG_SYS_BMAN_CENA_SIZE)
 686 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 687 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 688 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 689 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 690 #ifdef CONFIG_PHYS_64BIT
 691 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 692 #else
 693 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 694 #endif
 695 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 696 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 697 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 698 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 699 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 700 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 701                                         CONFIG_SYS_QMAN_CENA_SIZE)
 702 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 703 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 704
 705 #define CONFIG_SYS_DPAA_FMAN
 706
 707 #ifdef CONFIG_TARGET_T1024RDB
 708 #define CONFIG_QE
 709 #define CONFIG_U_QE
 710 #endif
 711 /* Default address of microcode for the Linux FMan driver */
 712 #if defined(CONFIG_SPIFLASH)
 713 /*
 714  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 715  * env, so we got 0x110000.
 716  */
 717 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 718 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 719 #define CONFIG_SYS_QE_FW_ADDR   0x130000
 720 #elif defined(CONFIG_SDCARD)
 721 /*
 722  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 723  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 724  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080(0x820).
 725  */
 726 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 727 #define CONFIG_SYS_FMAN_FW_ADDR         (512 * 0x820)
 728 #define CONFIG_SYS_QE_FW_ADDR           (512 * 0x920)
 729 #elif defined(CONFIG_NAND)
 730 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 731 #if defined(CONFIG_TARGET_T1024RDB)
 732 #define CONFIG_SYS_FMAN_FW_ADDR         (3 * CONFIG_SYS_NAND_BLOCK_SIZE)
 733 #define CONFIG_SYS_QE_FW_ADDR           (4 * CONFIG_SYS_NAND_BLOCK_SIZE)
 734 #elif defined(CONFIG_TARGET_T1023RDB)
 735 #define CONFIG_SYS_FMAN_FW_ADDR         (11 * CONFIG_SYS_NAND_BLOCK_SIZE)
 736 #define CONFIG_SYS_QE_FW_ADDR           (12 * CONFIG_SYS_NAND_BLOCK_SIZE)
 737 #endif
 738 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 739 /*
 740  * Slave has no ucode locally, it can fetch this from remote. When implementing
 741  * in two corenet boards, slave's ucode could be stored in master's memory
 742  * space, the address can be mapped from slave TLB->slave LAW->
 743  * slave SRIO or PCIE outbound window->master inbound window->
 744  * master LAW->the ucode address in master's memory space.
 745  */
 746 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 747 #define CONFIG_SYS_FMAN_FW_ADDR         0xFFE00000
 748 #else
 749 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 750 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 751 #define CONFIG_SYS_QE_FW_ADDR           0xEFE00000
 752 #endif
 753 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 754 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 755 #endif /* CONFIG_NOBQFMAN */
 756
 757 #ifdef CONFIG_SYS_DPAA_FMAN
 758 #define CONFIG_FMAN_ENET
 759 #define CONFIG_PHYLIB_10G
 760 #define CONFIG_PHY_REALTEK
 761 #define CONFIG_PHY_AQUANTIA
 762 #if defined(CONFIG_TARGET_T1024RDB)
 763 #define RGMII_PHY1_ADDR         0x2
 764 #define RGMII_PHY2_ADDR         0x6
 765 #define SGMII_AQR_PHY_ADDR      0x2
 766 #define FM1_10GEC1_PHY_ADDR     0x1
 767 #elif defined(CONFIG_TARGET_T1023RDB)
 768 #define RGMII_PHY1_ADDR         0x1
 769 #define SGMII_RTK_PHY_ADDR      0x3
 770 #define SGMII_AQR_PHY_ADDR      0x2
 771 #endif
 772 #endif
 773
 774 #ifdef CONFIG_FMAN_ENET
 775 #define CONFIG_MII              /* MII PHY management */
 776 #define CONFIG_ETHPRIME         "FM1@DTSEC4"
 777 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 778 #endif
 779
 780 /*
 781  * Dynamic MTD Partition support with mtdparts
 782  */
 783 #ifndef CONFIG_SYS_NO_FLASH
 784 #define CONFIG_MTD_DEVICE
 785 #define CONFIG_MTD_PARTITIONS
 786 #define CONFIG_CMD_MTDPARTS
 787 #define CONFIG_FLASH_CFI_MTD
 788 #define MTDIDS_DEFAULT "nor0=fe8000000.nor,nand0=fff800000.flash," \
 789                         "spi0=spife110000.1"
 790 #define MTDPARTS_DEFAULT "mtdparts=fe8000000.nor:1m(uboot),5m(kernel)," \
 791                         "128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot)," \
 792                         "5m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:" \
 793                         "1m(uboot),5m(kernel),128k(dtb),-(user)"
 794 #endif
 795
 796 /*
 797  * Environment
 798  */
 799 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 800 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 801
 802 /*
 803  * Command line configuration.
 804  */
 805 #define CONFIG_CMD_DATE
 806 #define CONFIG_CMD_EEPROM
 807 #define CONFIG_CMD_ERRATA
 808 #define CONFIG_CMD_IRQ
 809 #define CONFIG_CMD_REGINFO
 810
 811 #ifdef CONFIG_PCI
 812 #define CONFIG_CMD_PCI
 813 #endif
 814
 815 /*
 816  * Miscellaneous configurable options
 817  */
 818 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 819 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 820 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 821 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 822 #ifdef CONFIG_CMD_KGDB
 823 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 824 #else
 825 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 826 #endif
 827 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 828 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 829 #define CONFIG_SYS_BARGSIZE  CONFIG_SYS_CBSIZE  /* Boot Argument Buffer Size */
 830
 831 /*
 832  * For booting Linux, the board info and command line data
 833  * have to be in the first 64 MB of memory, since this is
 834  * the maximum mapped by the Linux kernel during initialization.
 835  */
 836 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 837 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 838
 839 #ifdef CONFIG_CMD_KGDB
 840 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 841 #endif
 842
 843 /*
 844  * Environment Configuration
 845  */
 846 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 847 #define CONFIG_BOOTFILE         "uImage"
 848 #define CONFIG_UBOOTPATH        u-boot.bin /* U-Boot image on TFTP server */
 849 #define CONFIG_LOADADDR         1000000 /* default location for tftp, bootm */
 850 #define CONFIG_BAUDRATE         115200
 851 #define __USB_PHY_TYPE          utmi
 852
 853 #ifdef CONFIG_ARCH_T1024
 854 #define CONFIG_BOARDNAME t1024rdb
 855 #define BANK_INTLV cs0_cs1
 856 #else
 857 #define CONFIG_BOARDNAME t1023rdb
 858 #define BANK_INTLV  null
 859 #endif
 860
 861 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 862         "hwconfig=fsl_ddr:ctlr_intlv=cacheline,"                \
 863         "bank_intlv=" __stringify(BANK_INTLV) "\0"              \
 864         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"  \
 865         "ramdiskfile=" __stringify(CONFIG_BOARDNAME) "/ramdisk.uboot\0" \
 866         "fdtfile=" __stringify(CONFIG_BOARDNAME) "/"            \
 867         __stringify(CONFIG_BOARDNAME) ".dtb\0"                  \
 868         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 869         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 870         "bootargs=root=/dev/ram rw console=ttyS0,115200\0" \
 871         "netdev=eth0\0"                                         \
 872         "tftpflash=tftpboot $loadaddr $uboot && "               \
 873         "protect off $ubootaddr +$filesize && "                 \
 874         "erase $ubootaddr +$filesize && "                       \
 875         "cp.b $loadaddr $ubootaddr $filesize && "               \
 876         "protect on $ubootaddr +$filesize && "                  \
 877         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 878         "consoledev=ttyS0\0"                                    \
 879         "ramdiskaddr=2000000\0"                                 \
 880         "fdtaddr=1e00000\0"                                     \
 881         "bdev=sda3\0"
 882
 883 #define CONFIG_LINUX                                    \
 884         "setenv bootargs root=/dev/ram rw "             \
 885         "console=$consoledev,$baudrate $othbootargs;"   \
 886         "setenv ramdiskaddr 0x02000000;"                \
 887         "setenv fdtaddr 0x00c00000;"                    \
 888         "setenv loadaddr 0x1000000;"                    \
 889         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 890
 891 #define CONFIG_NFSBOOTCOMMAND                   \
 892         "setenv bootargs root=/dev/nfs rw "     \
 893         "nfsroot=$serverip:$rootpath "          \
 894         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 895         "console=$consoledev,$baudrate $othbootargs;"   \
 896         "tftp $loadaddr $bootfile;"             \
 897         "tftp $fdtaddr $fdtfile;"               \
 898         "bootm $loadaddr - $fdtaddr"
 899
 900 #define CONFIG_BOOTCOMMAND      CONFIG_LINUX
 901
 902 /* Hash command with SHA acceleration supported in hardware */
 903 #ifdef CONFIG_FSL_CAAM
 904 #define CONFIG_CMD_HASH
 905 #define CONFIG_SHA_HW_ACCEL
 906 #endif
 907
 908 #include <asm/fsl_secure_boot.h>
 909
 910 #endif  /* __T1024RDB_H */