include/configs/T102xRDB.h

   1 /*
   2  * Copyright 2014 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * T1024/T1023 RDB board configuration file
   9  */
  10
  11 #ifndef __T1024RDB_H
  12 #define __T1024RDB_H
  13
  14 #if defined(CONFIG_T1023RDB)
  15 #ifdef CONFIG_SPL
  16 #define CONFIG_SYS_NO_FLASH
  17 #endif
  18 #endif
  19
  20 /* High Level Configuration Options */
  21 #define CONFIG_SYS_GENERIC_BOARD
  22 #define CONFIG_DISPLAY_BOARDINFO
  23 #define CONFIG_BOOKE
  24 #define CONFIG_E500                     /* BOOKE e500 family */
  25 #define CONFIG_E500MC                   /* BOOKE e500mc family */
  26 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  27 #define CONFIG_MP                       /* support multiple processors */
  28 #define CONFIG_PHYS_64BIT
  29 #define CONFIG_ENABLE_36BIT_PHYS
  30
  31 #ifdef CONFIG_PHYS_64BIT
  32 #define CONFIG_ADDR_MAP         1
  33 #define CONFIG_SYS_NUM_ADDR_MAP 64      /* number of TLB1 entries */
  34 #endif
  35
  36 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  37 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
  38 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
  39
  40 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  41 #define CONFIG_ENV_OVERWRITE
  42
  43 /* support deep sleep */
  44 #ifdef CONFIG_PPC_T1024
  45 #define CONFIG_DEEP_SLEEP
  46 #endif
  47 #if defined(CONFIG_DEEP_SLEEP)
  48 #define CONFIG_SILENT_CONSOLE
  49 #define CONFIG_BOARD_EARLY_INIT_F
  50 #endif
  51
  52 #ifdef CONFIG_RAMBOOT_PBL
  53 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xrdb/t1024_pbi.cfg
  54 #if defined(CONFIG_T1024RDB)
  55 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1024_rcw.cfg
  56 #elif defined(CONFIG_T1023RDB)
  57 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1023_rcw.cfg
  58 #endif
  59 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
  60 #define CONFIG_SPL_ENV_SUPPORT
  61 #define CONFIG_SPL_SERIAL_SUPPORT
  62 #define CONFIG_SPL_FLUSH_IMAGE
  63 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  64 #define CONFIG_SPL_LIBGENERIC_SUPPORT
  65 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  66 #define CONFIG_SPL_I2C_SUPPORT
  67 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT
  68 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  69 #define CONFIG_SYS_TEXT_BASE            0x30001000
  70 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
  71 #define CONFIG_SPL_PAD_TO               0x40000
  72 #define CONFIG_SPL_MAX_SIZE             0x28000
  73 #define RESET_VECTOR_OFFSET             0x27FFC
  74 #define BOOT_PAGE_OFFSET                0x27000
  75 #ifdef CONFIG_SPL_BUILD
  76 #define CONFIG_SPL_SKIP_RELOCATE
  77 #define CONFIG_SPL_COMMON_INIT_DDR
  78 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  79 #define CONFIG_SYS_NO_FLASH
  80 #endif
  81
  82 #ifdef CONFIG_NAND
  83 #define CONFIG_SPL_NAND_SUPPORT
  84 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  85 #define CONFIG_SYS_NAND_U_BOOT_DST      0x30000000
  86 #define CONFIG_SYS_NAND_U_BOOT_START    0x30000000
  87 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
  88 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  89 #define CONFIG_SPL_NAND_BOOT
  90 #endif
  91
  92 #ifdef CONFIG_SPIFLASH
  93 #define CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
  94 #define CONFIG_SPL_SPI_SUPPORT
  95 #define CONFIG_SPL_SPI_FLASH_SUPPORT
  96 #define CONFIG_SPL_SPI_FLASH_MINIMAL
  97 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (768 << 10)
  98 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x30000000)
  99 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x30000000)
 100 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (256 << 10)
 101 #define CONFIG_SYS_LDSCRIPT             "arch/powerpc/cpu/mpc85xx/u-boot.lds"
 102 #ifndef CONFIG_SPL_BUILD
 103 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 104 #endif
 105 #define CONFIG_SPL_SPI_BOOT
 106 #endif
 107
 108 #ifdef CONFIG_SDCARD
 109 #define CONFIG_RESET_VECTOR_ADDRESS     0x30000FFC
 110 #define CONFIG_SPL_MMC_SUPPORT
 111 #define CONFIG_SPL_MMC_MINIMAL
 112 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
 113 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x30000000)
 114 #define CONFIG_SYS_MMC_U_BOOT_START     (0x30000000)
 115 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
 116 #define CONFIG_SYS_LDSCRIPT             "arch/powerpc/cpu/mpc85xx/u-boot.lds"
 117 #ifndef CONFIG_SPL_BUILD
 118 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 119 #endif
 120 #define CONFIG_SPL_MMC_BOOT
 121 #endif
 122
 123 #endif /* CONFIG_RAMBOOT_PBL */
 124
 125 #ifndef CONFIG_SYS_TEXT_BASE
 126 #define CONFIG_SYS_TEXT_BASE    0xeff40000
 127 #endif
 128
 129 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 130 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
 131 #endif
 132
 133 #ifndef CONFIG_SYS_NO_FLASH
 134 #define CONFIG_FLASH_CFI_DRIVER
 135 #define CONFIG_SYS_FLASH_CFI
 136 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 137 #endif
 138
 139 /* PCIe Boot - Master */
 140 #define CONFIG_SRIO_PCIE_BOOT_MASTER
 141 /*
 142  * for slave u-boot IMAGE instored in master memory space,
 143  * PHYS must be aligned based on the SIZE
 144  */
 145 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
 146 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE     0x100000 /* 1M */
 147 #ifdef CONFIG_PHYS_64BIT
 148 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
 149 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
 150 #else
 151 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xef200000
 152 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0xfff00000
 153 #endif
 154 /*
 155  * for slave UCODE and ENV instored in master memory space,
 156  * PHYS must be aligned based on the SIZE
 157  */
 158 #ifdef CONFIG_PHYS_64BIT
 159 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
 160 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS  0x3ffe00000ull
 161 #else
 162 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xef100000
 163 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS  0xffe00000
 164 #endif
 165 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE    0x40000 /* 256K */
 166 /* slave core release by master*/
 167 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET        0xe00e4
 168 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK      0x00000001 /* release core 0 */
 169
 170 /* PCIe Boot - Slave */
 171 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 172 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 173 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 174                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 175 /* Set 1M boot space for PCIe boot */
 176 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
 177 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS       \
 178                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
 179 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
 180 #define CONFIG_SYS_NO_FLASH
 181 #endif
 182
 183 #if defined(CONFIG_SPIFLASH)
 184 #define CONFIG_SYS_EXTRA_ENV_RELOC
 185 #define CONFIG_ENV_IS_IN_SPI_FLASH
 186 #define CONFIG_ENV_SPI_BUS              0
 187 #define CONFIG_ENV_SPI_CS               0
 188 #define CONFIG_ENV_SPI_MAX_HZ           10000000
 189 #define CONFIG_ENV_SPI_MODE             0
 190 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 191 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 192 #if defined(CONFIG_T1024RDB)
 193 #define CONFIG_ENV_SECT_SIZE            0x10000
 194 #elif defined(CONFIG_T1023RDB)
 195 #define CONFIG_ENV_SECT_SIZE            0x40000
 196 #endif
 197 #elif defined(CONFIG_SDCARD)
 198 #define CONFIG_SYS_EXTRA_ENV_RELOC
 199 #define CONFIG_ENV_IS_IN_MMC
 200 #define CONFIG_SYS_MMC_ENV_DEV          0
 201 #define CONFIG_ENV_SIZE                 0x2000
 202 #define CONFIG_ENV_OFFSET               (512 * 0x800)
 203 #elif defined(CONFIG_NAND)
 204 #define CONFIG_SYS_EXTRA_ENV_RELOC
 205 #define CONFIG_ENV_IS_IN_NAND
 206 #define CONFIG_ENV_SIZE                 0x2000
 207 #if defined(CONFIG_T1024RDB)
 208 #define CONFIG_ENV_OFFSET               (2 * CONFIG_SYS_NAND_BLOCK_SIZE)
 209 #elif defined(CONFIG_T1023RDB)
 210 #define CONFIG_ENV_OFFSET               (10 * CONFIG_SYS_NAND_BLOCK_SIZE)
 211 #endif
 212 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 213 #define CONFIG_ENV_IS_IN_REMOTE
 214 #define CONFIG_ENV_ADDR         0xffe20000
 215 #define CONFIG_ENV_SIZE         0x2000
 216 #elif defined(CONFIG_ENV_IS_NOWHERE)
 217 #define CONFIG_ENV_SIZE         0x2000
 218 #else
 219 #define CONFIG_ENV_IS_IN_FLASH
 220 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 221 #define CONFIG_ENV_SIZE         0x2000
 222 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 223 #endif
 224
 225
 226 #ifndef __ASSEMBLY__
 227 unsigned long get_board_sys_clk(void);
 228 unsigned long get_board_ddr_clk(void);
 229 #endif
 230
 231 #define CONFIG_SYS_CLK_FREQ     100000000
 232 #define CONFIG_DDR_CLK_FREQ     100000000
 233
 234 /*
 235  * These can be toggled for performance analysis, otherwise use default.
 236  */
 237 #define CONFIG_SYS_CACHE_STASHING
 238 #define CONFIG_BACKSIDE_L2_CACHE
 239 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
 240 #define CONFIG_BTB                      /* toggle branch predition */
 241 #define CONFIG_DDR_ECC
 242 #ifdef CONFIG_DDR_ECC
 243 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 244 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 245 #endif
 246
 247 #define CONFIG_CMD_MEMTEST
 248 #define CONFIG_SYS_MEMTEST_START        0x00200000 /* memtest works on */
 249 #define CONFIG_SYS_MEMTEST_END          0x00400000
 250 #define CONFIG_SYS_ALT_MEMTEST
 251 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 252
 253 /*
 254  *  Config the L3 Cache as L3 SRAM
 255  */
 256 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 257 #define CONFIG_SYS_L3_SIZE              (256 << 10)
 258 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
 259 #ifdef CONFIG_RAMBOOT_PBL
 260 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
 261 #endif
 262 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 263 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (30 << 10)
 264 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 265 #define CONFIG_SPL_RELOC_STACK_SIZE     (22 << 10)
 266
 267 #ifdef CONFIG_PHYS_64BIT
 268 #define CONFIG_SYS_DCSRBAR              0xf0000000
 269 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 270 #endif
 271
 272 /* EEPROM */
 273 #define CONFIG_ID_EEPROM
 274 #define CONFIG_SYS_I2C_EEPROM_NXID
 275 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 276 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50
 277 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  2
 278 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 279 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 280
 281 /*
 282  * DDR Setup
 283  */
 284 #define CONFIG_VERY_BIG_RAM
 285 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 286 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 287 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 288 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 289 #define CONFIG_FSL_DDR_INTERACTIVE
 290 #if defined(CONFIG_T1024RDB)
 291 #define CONFIG_DDR_SPD
 292 #define CONFIG_SYS_FSL_DDR3
 293 #define CONFIG_SYS_SPD_BUS_NUM  0
 294 #define SPD_EEPROM_ADDRESS      0x51
 295 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 296 #elif defined(CONFIG_T1023RDB)
 297 #define CONFIG_SYS_FSL_DDR4
 298 #define CONFIG_SYS_DDR_RAW_TIMING
 299 #define CONFIG_SYS_SDRAM_SIZE   2048
 300 #endif
 301
 302 /*
 303  * IFC Definitions
 304  */
 305 #define CONFIG_SYS_FLASH_BASE   0xe8000000
 306 #ifdef CONFIG_PHYS_64BIT
 307 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 308 #else
 309 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 310 #endif
 311
 312 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 313 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 314                                 CSPR_PORT_SIZE_16 | \
 315                                 CSPR_MSEL_NOR | \
 316                                 CSPR_V)
 317 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 318
 319 /* NOR Flash Timing Params */
 320 #if defined(CONFIG_T1024RDB)
 321 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 322 #elif defined(CONFIG_T1023RDB)
 323 #define CONFIG_SYS_NOR_CSOR    (CSOR_NOR_ADM_SHIFT(4) | \
 324                                 CSOR_NAND_TRHZ_80 | CSOR_NOR_ADM_SHFT_MODE_EN)
 325 #endif
 326 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 327                                 FTIM0_NOR_TEADC(0x5) | \
 328                                 FTIM0_NOR_TEAHC(0x5))
 329 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 330                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 331                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 332 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 333                                 FTIM2_NOR_TCH(0x4) | \
 334                                 FTIM2_NOR_TWPH(0x0E) | \
 335                                 FTIM2_NOR_TWP(0x1c))
 336 #define CONFIG_SYS_NOR_FTIM3    0x0
 337
 338 #define CONFIG_SYS_FLASH_QUIET_TEST
 339 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 340
 341 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 342 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 343 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 344 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 345
 346 #define CONFIG_SYS_FLASH_EMPTY_INFO
 347 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 348
 349 #ifdef CONFIG_T1024RDB
 350 /* CPLD on IFC */
 351 #define CONFIG_SYS_CPLD_BASE            0xffdf0000
 352 #define CONFIG_SYS_CPLD_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
 353 #define CONFIG_SYS_CSPR2_EXT            (0xf)
 354 #define CONFIG_SYS_CSPR2                (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE) \
 355                                                 | CSPR_PORT_SIZE_8 \
 356                                                 | CSPR_MSEL_GPCM \
 357                                                 | CSPR_V)
 358 #define CONFIG_SYS_AMASK2               IFC_AMASK(64*1024)
 359 #define CONFIG_SYS_CSOR2                0x0
 360
 361 /* CPLD Timing parameters for IFC CS2 */
 362 #define CONFIG_SYS_CS2_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 363                                                 FTIM0_GPCM_TEADC(0x0e) | \
 364                                                 FTIM0_GPCM_TEAHC(0x0e))
 365 #define CONFIG_SYS_CS2_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 366                                                 FTIM1_GPCM_TRAD(0x1f))
 367 #define CONFIG_SYS_CS2_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 368                                                 FTIM2_GPCM_TCH(0x8) | \
 369                                                 FTIM2_GPCM_TWP(0x1f))
 370 #define CONFIG_SYS_CS2_FTIM3            0x0
 371 #endif
 372
 373 /* NAND Flash on IFC */
 374 #define CONFIG_NAND_FSL_IFC
 375 #define CONFIG_SYS_NAND_BASE            0xff800000
 376 #ifdef CONFIG_PHYS_64BIT
 377 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 378 #else
 379 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 380 #endif
 381 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 382 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 383                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 384                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 385                                 | CSPR_V)
 386 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 387
 388 #if defined(CONFIG_T1024RDB)
 389 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 390                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 391                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 392                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 393                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 394                                 | CSOR_NAND_SPRZ_224    /* Spare size = 224 */ \
 395                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 396 #define CONFIG_SYS_NAND_BLOCK_SIZE      (512 * 1024)
 397 #elif defined(CONFIG_T1023RDB)
 398 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_RAL_3        /* RAL 3Bytes */ \
 399                                 | CSOR_NAND_RAL_3       /* RAL 3Bytes */ \
 400                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 401                                 | CSOR_NAND_SPRZ_128    /* Spare size = 128 */ \
 402                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 403 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 404 #endif
 405
 406 #define CONFIG_SYS_NAND_ONFI_DETECTION
 407 /* ONFI NAND Flash mode0 Timing Params */
 408 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 409                                         FTIM0_NAND_TWP(0x18)   | \
 410                                         FTIM0_NAND_TWCHT(0x07) | \
 411                                         FTIM0_NAND_TWH(0x0a))
 412 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 413                                         FTIM1_NAND_TWBE(0x39)  | \
 414                                         FTIM1_NAND_TRR(0x0e)   | \
 415                                         FTIM1_NAND_TRP(0x18))
 416 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 417                                         FTIM2_NAND_TREH(0x0a) | \
 418                                         FTIM2_NAND_TWHRE(0x1e))
 419 #define CONFIG_SYS_NAND_FTIM3           0x0
 420
 421 #define CONFIG_SYS_NAND_DDR_LAW         11
 422 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 423 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 424 #define CONFIG_CMD_NAND
 425
 426 #if defined(CONFIG_NAND)
 427 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 428 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 429 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 430 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 431 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 432 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 433 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 434 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 435 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 436 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR0_CSPR
 437 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 438 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 439 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 440 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 441 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 442 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 443 #else
 444 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 445 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 446 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 447 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 448 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 449 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 450 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 451 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 452 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NAND_CSPR_EXT
 453 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 454 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 455 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 456 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 457 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 458 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 459 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 460 #endif
 461
 462 #ifdef CONFIG_SPL_BUILD
 463 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SPL_TEXT_BASE
 464 #else
 465 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 466 #endif
 467
 468 #if defined(CONFIG_RAMBOOT_PBL)
 469 #define CONFIG_SYS_RAMBOOT
 470 #endif
 471
 472 #define CONFIG_BOARD_EARLY_INIT_R
 473 #define CONFIG_MISC_INIT_R
 474
 475 #define CONFIG_HWCONFIG
 476
 477 /* define to use L1 as initial stack */
 478 #define CONFIG_L1_INIT_RAM
 479 #define CONFIG_SYS_INIT_RAM_LOCK
 480 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 481 #ifdef CONFIG_PHYS_64BIT
 482 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 483 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe0ec000
 484 /* The assembler doesn't like typecast */
 485 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 486         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 487           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 488 #else
 489 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   0xfe0ec000 /* Initial L1 address */
 490 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 491 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 492 #endif
 493 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 494
 495 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 496                                         GENERATED_GBL_DATA_SIZE)
 497 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 498
 499 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 500 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
 501
 502 /* Serial Port */
 503 #define CONFIG_CONS_INDEX       1
 504 #define CONFIG_SYS_NS16550
 505 #define CONFIG_SYS_NS16550_SERIAL
 506 #define CONFIG_SYS_NS16550_REG_SIZE     1
 507 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 508
 509 #define CONFIG_SYS_BAUDRATE_TABLE       \
 510         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 511
 512 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 513 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 514 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 515 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 516 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    /* determine from environment */
 517
 518 /* Use the HUSH parser */
 519 #define CONFIG_SYS_HUSH_PARSER
 520 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 521
 522 /* Video */
 523 #undef CONFIG_FSL_DIU_FB        /* RDB doesn't support DIU */
 524 #ifdef CONFIG_FSL_DIU_FB
 525 #define CONFIG_SYS_DIU_ADDR     (CONFIG_SYS_CCSRBAR + 0x180000)
 526 #define CONFIG_VIDEO
 527 #define CONFIG_CMD_BMP
 528 #define CONFIG_CFB_CONSOLE
 529 #define CONFIG_VIDEO_SW_CURSOR
 530 #define CONFIG_VGA_AS_SINGLE_DEVICE
 531 #define CONFIG_VIDEO_LOGO
 532 #define CONFIG_VIDEO_BMP_LOGO
 533 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
 534 /*
 535  * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so
 536  * disable empty flash sector detection, which is I/O-intensive.
 537  */
 538 #undef CONFIG_SYS_FLASH_EMPTY_INFO
 539 #endif
 540
 541 /* pass open firmware flat tree */
 542 #define CONFIG_OF_LIBFDT
 543 #define CONFIG_OF_BOARD_SETUP
 544 #define CONFIG_OF_STDOUT_VIA_ALIAS
 545
 546 /* new uImage format support */
 547 #define CONFIG_FIT
 548 #define CONFIG_FIT_VERBOSE      /* enable fit_format_{error,warning}() */
 549
 550 /* I2C */
 551 #define CONFIG_SYS_I2C
 552 #define CONFIG_SYS_I2C_FSL              /* Use FSL common I2C driver */
 553 #define CONFIG_SYS_FSL_I2C_SPEED        50000   /* I2C speed in Hz */
 554 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 555 #define CONFIG_SYS_FSL_I2C2_SPEED       50000   /* I2C speed in Hz */
 556 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 557 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 558 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 559
 560 #define I2C_MUX_PCA_ADDR                0x77
 561 #define I2C_MUX_PCA_ADDR_PRI            0x77 /* Primary Mux*/
 562
 563
 564 /* I2C bus multiplexer */
 565 #define I2C_MUX_CH_DEFAULT      0x8
 566
 567 /*
 568  * RTC configuration
 569  */
 570 #define RTC
 571 #define CONFIG_RTC_DS1337       1
 572 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
 573
 574 /*
 575  * eSPI - Enhanced SPI
 576  */
 577 #define CONFIG_FSL_ESPI
 578 #define CONFIG_SPI_FLASH
 579 #if defined(CONFIG_T1024RDB)
 580 #define CONFIG_SPI_FLASH_STMICRO
 581 #elif defined(CONFIG_T1023RDB)
 582 #define CONFIG_SPI_FLASH_SPANSION
 583 #endif
 584 #define CONFIG_CMD_SF
 585 #define CONFIG_SPI_FLASH_BAR
 586 #define CONFIG_SF_DEFAULT_SPEED 10000000
 587 #define CONFIG_SF_DEFAULT_MODE  0
 588
 589 /*
 590  * General PCIe
 591  * Memory space is mapped 1-1, but I/O space must start from 0.
 592  */
 593 #define CONFIG_PCI              /* Enable PCI/PCIE */
 594 #define CONFIG_PCIE1            /* PCIE controler 1 */
 595 #define CONFIG_PCIE2            /* PCIE controler 2 */
 596 #define CONFIG_PCIE3            /* PCIE controler 3 */
 597 #ifdef CONFIG_PPC_T1040
 598 #define CONFIG_PCIE4            /* PCIE controler 4 */
 599 #endif
 600 #define CONFIG_FSL_PCI_INIT     /* Use common FSL init code */
 601 #define CONFIG_SYS_PCI_64BIT    /* enable 64-bit PCI resources */
 602 #define CONFIG_PCI_INDIRECT_BRIDGE
 603
 604 #ifdef CONFIG_PCI
 605 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 606 #ifdef CONFIG_PCIE1
 607 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 608 #ifdef CONFIG_PHYS_64BIT
 609 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 610 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 611 #else
 612 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 613 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 614 #endif
 615 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000      /* 256M */
 616 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 617 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 618 #ifdef CONFIG_PHYS_64BIT
 619 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 620 #else
 621 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
 622 #endif
 623 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 624 #endif
 625
 626 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 627 #ifdef CONFIG_PCIE2
 628 #define CONFIG_SYS_PCIE2_MEM_VIRT       0x90000000
 629 #ifdef CONFIG_PHYS_64BIT
 630 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 631 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc10000000ull
 632 #else
 633 #define CONFIG_SYS_PCIE2_MEM_BUS        0x90000000
 634 #define CONFIG_SYS_PCIE2_MEM_PHYS       0x90000000
 635 #endif
 636 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000      /* 256M */
 637 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 638 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 639 #ifdef CONFIG_PHYS_64BIT
 640 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 641 #else
 642 #define CONFIG_SYS_PCIE2_IO_PHYS        0xf8010000
 643 #endif
 644 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 645 #endif
 646
 647 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 648 #ifdef CONFIG_PCIE3
 649 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xa0000000
 650 #ifdef CONFIG_PHYS_64BIT
 651 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 652 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc20000000ull
 653 #else
 654 #define CONFIG_SYS_PCIE3_MEM_BUS        0xa0000000
 655 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xa0000000
 656 #endif
 657 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x10000000      /* 256M */
 658 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 659 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 660 #ifdef CONFIG_PHYS_64BIT
 661 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 662 #else
 663 #define CONFIG_SYS_PCIE3_IO_PHYS        0xf8020000
 664 #endif
 665 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 666 #endif
 667
 668 /* controller 4, Base address 203000, to be removed */
 669 #ifdef CONFIG_PCIE4
 670 #define CONFIG_SYS_PCIE4_MEM_VIRT       0xb0000000
 671 #ifdef CONFIG_PHYS_64BIT
 672 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 673 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc30000000ull
 674 #else
 675 #define CONFIG_SYS_PCIE4_MEM_BUS        0xb0000000
 676 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xb0000000
 677 #endif
 678 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x10000000      /* 256M */
 679 #define CONFIG_SYS_PCIE4_IO_VIRT        0xf8030000
 680 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 681 #ifdef CONFIG_PHYS_64BIT
 682 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 683 #else
 684 #define CONFIG_SYS_PCIE4_IO_PHYS        0xf8030000
 685 #endif
 686 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 687 #endif
 688
 689 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 690 #define CONFIG_E1000
 691 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 692 #define CONFIG_DOS_PARTITION
 693 #endif  /* CONFIG_PCI */
 694
 695 /*
 696  * USB
 697  */
 698 #define CONFIG_HAS_FSL_DR_USB
 699
 700 #ifdef CONFIG_HAS_FSL_DR_USB
 701 #define CONFIG_USB_EHCI
 702 #define CONFIG_CMD_USB
 703 #define CONFIG_USB_STORAGE
 704 #define CONFIG_USB_EHCI_FSL
 705 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 706 #define CONFIG_CMD_EXT2
 707 #endif
 708
 709 /*
 710  * SDHC
 711  */
 712 #define CONFIG_MMC
 713 #ifdef CONFIG_MMC
 714 #define CONFIG_FSL_ESDHC
 715 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 716 #define CONFIG_CMD_MMC
 717 #define CONFIG_GENERIC_MMC
 718 #define CONFIG_CMD_EXT2
 719 #define CONFIG_CMD_FAT
 720 #define CONFIG_DOS_PARTITION
 721 #endif
 722
 723 /* Qman/Bman */
 724 #ifndef CONFIG_NOBQFMAN
 725 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 726 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 727 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 728 #ifdef CONFIG_PHYS_64BIT
 729 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 730 #else
 731 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 732 #endif
 733 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 734 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 735 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 736 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 737 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 738 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 739                                         CONFIG_SYS_BMAN_CENA_SIZE)
 740 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 741 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 742 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 743 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 744 #ifdef CONFIG_PHYS_64BIT
 745 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 746 #else
 747 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 748 #endif
 749 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 750 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 751 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 752 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 753 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 754 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 755                                         CONFIG_SYS_QMAN_CENA_SIZE)
 756 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 757 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 758
 759 #define CONFIG_SYS_DPAA_FMAN
 760
 761 #define CONFIG_QE
 762 #define CONFIG_U_QE
 763 /* Default address of microcode for the Linux FMan driver */
 764 #if defined(CONFIG_SPIFLASH)
 765 /*
 766  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 767  * env, so we got 0x110000.
 768  */
 769 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 770 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 771 #define CONFIG_SYS_QE_FW_ADDR   0x130000
 772 #elif defined(CONFIG_SDCARD)
 773 /*
 774  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 775  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 776  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080(0x820).
 777  */
 778 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 779 #define CONFIG_SYS_FMAN_FW_ADDR         (512 * 0x820)
 780 #define CONFIG_SYS_QE_FW_ADDR           (512 * 0x920)
 781 #elif defined(CONFIG_NAND)
 782 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 783 #if defined(CONFIG_T1024RDB)
 784 #define CONFIG_SYS_FMAN_FW_ADDR         (3 * CONFIG_SYS_NAND_BLOCK_SIZE)
 785 #define CONFIG_SYS_QE_FW_ADDR           (4 * CONFIG_SYS_NAND_BLOCK_SIZE)
 786 #elif defined(CONFIG_T1023RDB)
 787 #define CONFIG_SYS_FMAN_FW_ADDR         (11 * CONFIG_SYS_NAND_BLOCK_SIZE)
 788 #define CONFIG_SYS_QE_FW_ADDR           (12 * CONFIG_SYS_NAND_BLOCK_SIZE)
 789 #endif
 790 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 791 /*
 792  * Slave has no ucode locally, it can fetch this from remote. When implementing
 793  * in two corenet boards, slave's ucode could be stored in master's memory
 794  * space, the address can be mapped from slave TLB->slave LAW->
 795  * slave SRIO or PCIE outbound window->master inbound window->
 796  * master LAW->the ucode address in master's memory space.
 797  */
 798 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 799 #define CONFIG_SYS_FMAN_FW_ADDR         0xFFE00000
 800 #else
 801 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 802 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 803 #define CONFIG_SYS_QE_FW_ADDR           0xEFE00000
 804 #endif
 805 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 806 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 807 #endif /* CONFIG_NOBQFMAN */
 808
 809 #ifdef CONFIG_SYS_DPAA_FMAN
 810 #define CONFIG_FMAN_ENET
 811 #define CONFIG_PHYLIB_10G
 812 #define CONFIG_PHY_REALTEK
 813 #define CONFIG_PHY_AQUANTIA
 814 #if defined(CONFIG_T1024RDB)
 815 #define RGMII_PHY1_ADDR         0x2
 816 #define RGMII_PHY2_ADDR         0x6
 817 #define SGMII_AQR_PHY_ADDR      0x2
 818 #define FM1_10GEC1_PHY_ADDR     0x1
 819 #elif defined(CONFIG_T1023RDB)
 820 #define RGMII_PHY1_ADDR         0x1
 821 #define SGMII_RTK_PHY_ADDR      0x3
 822 #define SGMII_AQR_PHY_ADDR      0x2
 823 #endif
 824 #endif
 825
 826 #ifdef CONFIG_FMAN_ENET
 827 #define CONFIG_MII              /* MII PHY management */
 828 #define CONFIG_ETHPRIME         "FM1@DTSEC4"
 829 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 830 #endif
 831
 832 /*
 833  * Dynamic MTD Partition support with mtdparts
 834  */
 835 #ifndef CONFIG_SYS_NO_FLASH
 836 #define CONFIG_MTD_DEVICE
 837 #define CONFIG_MTD_PARTITIONS
 838 #define CONFIG_CMD_MTDPARTS
 839 #define CONFIG_FLASH_CFI_MTD
 840 #define MTDIDS_DEFAULT "nor0=fe8000000.nor,nand0=fff800000.flash," \
 841                         "spi0=spife110000.1"
 842 #define MTDPARTS_DEFAULT "mtdparts=fe8000000.nor:1m(uboot),5m(kernel)," \
 843                         "128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot)," \
 844                         "5m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:" \
 845                         "1m(uboot),5m(kernel),128k(dtb),-(user)"
 846 #endif
 847
 848 /*
 849  * Environment
 850  */
 851 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 852 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 853
 854 /*
 855  * Command line configuration.
 856  */
 857 #include <config_cmd_default.h>
 858
 859 #define CONFIG_CMD_DATE
 860 #define CONFIG_CMD_DHCP
 861 #define CONFIG_CMD_EEPROM
 862 #define CONFIG_CMD_ELF
 863 #define CONFIG_CMD_ERRATA
 864 #define CONFIG_CMD_GREPENV
 865 #define CONFIG_CMD_IRQ
 866 #define CONFIG_CMD_I2C
 867 #define CONFIG_CMD_MII
 868 #define CONFIG_CMD_PING
 869 #define CONFIG_CMD_ECHO
 870 #define CONFIG_CMD_REGINFO
 871 #define CONFIG_CMD_SETEXPR
 872 #define CONFIG_CMD_BDI
 873
 874 #ifdef CONFIG_PCI
 875 #define CONFIG_CMD_PCI
 876 #define CONFIG_CMD_NET
 877 #endif
 878
 879 /*
 880  * Miscellaneous configurable options
 881  */
 882 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 883 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 884 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 885 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 886 #define CONFIG_SYS_PROMPT       "=> "           /* Monitor Command Prompt */
 887 #ifdef CONFIG_CMD_KGDB
 888 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 889 #else
 890 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 891 #endif
 892 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 893 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 894 #define CONFIG_SYS_BARGSIZE  CONFIG_SYS_CBSIZE  /* Boot Argument Buffer Size */
 895
 896 /*
 897  * For booting Linux, the board info and command line data
 898  * have to be in the first 64 MB of memory, since this is
 899  * the maximum mapped by the Linux kernel during initialization.
 900  */
 901 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 902 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 903
 904 #ifdef CONFIG_CMD_KGDB
 905 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 906 #endif
 907
 908 /*
 909  * Environment Configuration
 910  */
 911 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 912 #define CONFIG_BOOTFILE         "uImage"
 913 #define CONFIG_UBOOTPATH        u-boot.bin /* U-Boot image on TFTP server */
 914 #define CONFIG_LOADADDR         1000000 /* default location for tftp, bootm */
 915 #define CONFIG_BOOTDELAY        10      /* -1 disables auto-boot */
 916 #define CONFIG_BAUDRATE         115200
 917 #define __USB_PHY_TYPE          utmi
 918
 919 #ifdef CONFIG_PPC_T1024
 920 #define CONFIG_BOARDNAME t1024rdb
 921 #define BANK_INTLV cs0_cs1
 922 #else
 923 #define CONFIG_BOARDNAME t1023rdb
 924 #define BANK_INTLV  null
 925 #endif
 926
 927 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 928         "hwconfig=fsl_ddr:ctlr_intlv=cacheline,"                \
 929         "bank_intlv=" __stringify(BANK_INTLV) "\0"              \
 930         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"  \
 931         "ramdiskfile=" __stringify(CONFIG_BOARDNAME) "/ramdisk.uboot\0" \
 932         "fdtfile=" __stringify(CONFIG_BOARDNAME) "/"            \
 933         __stringify(CONFIG_BOARDNAME) ".dtb\0"                  \
 934         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 935         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 936         "bootargs=root=/dev/ram rw console=ttyS0,115200\0" \
 937         "netdev=eth0\0"                                         \
 938         "tftpflash=tftpboot $loadaddr $uboot && "               \
 939         "protect off $ubootaddr +$filesize && "                 \
 940         "erase $ubootaddr +$filesize && "                       \
 941         "cp.b $loadaddr $ubootaddr $filesize && "               \
 942         "protect on $ubootaddr +$filesize && "                  \
 943         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 944         "consoledev=ttyS0\0"                                    \
 945         "ramdiskaddr=2000000\0"                                 \
 946         "fdtaddr=c00000\0"                                      \
 947         "bdev=sda3\0"
 948
 949 #define CONFIG_LINUX                                    \
 950         "setenv bootargs root=/dev/ram rw "             \
 951         "console=$consoledev,$baudrate $othbootargs;"   \
 952         "setenv ramdiskaddr 0x02000000;"                \
 953         "setenv fdtaddr 0x00c00000;"                    \
 954         "setenv loadaddr 0x1000000;"                    \
 955         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 956
 957
 958 #define CONFIG_NFSBOOTCOMMAND                   \
 959         "setenv bootargs root=/dev/nfs rw "     \
 960         "nfsroot=$serverip:$rootpath "          \
 961         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 962         "console=$consoledev,$baudrate $othbootargs;"   \
 963         "tftp $loadaddr $bootfile;"             \
 964         "tftp $fdtaddr $fdtfile;"               \
 965         "bootm $loadaddr - $fdtaddr"
 966
 967 #define CONFIG_BOOTCOMMAND      CONFIG_LINUX
 968
 969 #ifdef CONFIG_SECURE_BOOT
 970 #include <asm/fsl_secure_boot.h>
 971 #endif
 972
 973 #endif  /* __T1024RDB_H */