include/configs/T102xRDB.h

   1 /*
   2  * Copyright 2014 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * T1024/T1023 RDB board configuration file
   9  */
  10
  11 #ifndef __T1024RDB_H
  12 #define __T1024RDB_H
  13
  14 /* High Level Configuration Options */
  15 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  16 #define CONFIG_MP                       /* support multiple processors */
  17 #define CONFIG_ENABLE_36BIT_PHYS
  18
  19 #ifdef CONFIG_PHYS_64BIT
  20 #define CONFIG_ADDR_MAP         1
  21 #define CONFIG_SYS_NUM_ADDR_MAP 64      /* number of TLB1 entries */
  22 #endif
  23
  24 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  25 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
  26
  27 #define CONFIG_ENV_OVERWRITE
  28
  29 /* support deep sleep */
  30 #ifdef CONFIG_ARCH_T1024
  31 #define CONFIG_DEEP_SLEEP
  32 #endif
  33
  34 #ifdef CONFIG_RAMBOOT_PBL
  35 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xrdb/t1024_pbi.cfg
  36 #define CONFIG_SPL_FLUSH_IMAGE
  37 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  38 #define CONFIG_SYS_TEXT_BASE            0x30001000
  39 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
  40 #define CONFIG_SPL_PAD_TO               0x40000
  41 #define CONFIG_SPL_MAX_SIZE             0x28000
  42 #define RESET_VECTOR_OFFSET             0x27FFC
  43 #define BOOT_PAGE_OFFSET                0x27000
  44 #ifdef CONFIG_SPL_BUILD
  45 #define CONFIG_SPL_SKIP_RELOCATE
  46 #define CONFIG_SPL_COMMON_INIT_DDR
  47 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  48 #endif
  49
  50 #ifdef CONFIG_NAND
  51 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  52 #define CONFIG_SYS_NAND_U_BOOT_DST      0x30000000
  53 #define CONFIG_SYS_NAND_U_BOOT_START    0x30000000
  54 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
  55 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  56 #if defined(CONFIG_TARGET_T1024RDB)
  57 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1024_nand_rcw.cfg
  58 #elif defined(CONFIG_TARGET_T1023RDB)
  59 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1023_nand_rcw.cfg
  60 #endif
  61 #define CONFIG_SPL_NAND_BOOT
  62 #endif
  63
  64 #ifdef CONFIG_SPIFLASH
  65 #define CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
  66 #define CONFIG_SPL_SPI_FLASH_MINIMAL
  67 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (768 << 10)
  68 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x30000000)
  69 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x30000000)
  70 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (256 << 10)
  71 #define CONFIG_SYS_LDSCRIPT             "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  72 #ifndef CONFIG_SPL_BUILD
  73 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  74 #endif
  75 #if defined(CONFIG_TARGET_T1024RDB)
  76 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1024_spi_rcw.cfg
  77 #elif defined(CONFIG_TARGET_T1023RDB)
  78 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1023_spi_rcw.cfg
  79 #endif
  80 #define CONFIG_SPL_SPI_BOOT
  81 #endif
  82
  83 #ifdef CONFIG_SDCARD
  84 #define CONFIG_RESET_VECTOR_ADDRESS     0x30000FFC
  85 #define CONFIG_SPL_MMC_MINIMAL
  86 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
  87 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x30000000)
  88 #define CONFIG_SYS_MMC_U_BOOT_START     (0x30000000)
  89 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
  90 #define CONFIG_SYS_LDSCRIPT             "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  91 #ifndef CONFIG_SPL_BUILD
  92 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  93 #endif
  94 #if defined(CONFIG_TARGET_T1024RDB)
  95 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1024_sd_rcw.cfg
  96 #elif defined(CONFIG_TARGET_T1023RDB)
  97 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1023_sd_rcw.cfg
  98 #endif
  99 #define CONFIG_SPL_MMC_BOOT
 100 #endif
 101
 102 #endif /* CONFIG_RAMBOOT_PBL */
 103
 104 #ifndef CONFIG_SYS_TEXT_BASE
 105 #define CONFIG_SYS_TEXT_BASE    0xeff40000
 106 #endif
 107
 108 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 109 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
 110 #endif
 111
 112 #ifdef CONFIG_MTD_NOR_FLASH
 113 #define CONFIG_FLASH_CFI_DRIVER
 114 #define CONFIG_SYS_FLASH_CFI
 115 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 116 #endif
 117
 118 /* PCIe Boot - Master */
 119 #define CONFIG_SRIO_PCIE_BOOT_MASTER
 120 /*
 121  * for slave u-boot IMAGE instored in master memory space,
 122  * PHYS must be aligned based on the SIZE
 123  */
 124 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
 125 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE     0x100000 /* 1M */
 126 #ifdef CONFIG_PHYS_64BIT
 127 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
 128 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
 129 #else
 130 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xef200000
 131 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0xfff00000
 132 #endif
 133 /*
 134  * for slave UCODE and ENV instored in master memory space,
 135  * PHYS must be aligned based on the SIZE
 136  */
 137 #ifdef CONFIG_PHYS_64BIT
 138 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
 139 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS  0x3ffe00000ull
 140 #else
 141 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xef100000
 142 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS  0xffe00000
 143 #endif
 144 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE    0x40000 /* 256K */
 145 /* slave core release by master*/
 146 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET        0xe00e4
 147 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK      0x00000001 /* release core 0 */
 148
 149 /* PCIe Boot - Slave */
 150 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 151 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 152 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 153                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 154 /* Set 1M boot space for PCIe boot */
 155 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
 156 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS       \
 157                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
 158 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
 159 #endif
 160
 161 #if defined(CONFIG_SPIFLASH)
 162 #define CONFIG_SYS_EXTRA_ENV_RELOC
 163 #define CONFIG_ENV_IS_IN_SPI_FLASH
 164 #define CONFIG_ENV_SPI_BUS              0
 165 #define CONFIG_ENV_SPI_CS               0
 166 #define CONFIG_ENV_SPI_MAX_HZ           10000000
 167 #define CONFIG_ENV_SPI_MODE             0
 168 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 169 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 170 #if defined(CONFIG_TARGET_T1024RDB)
 171 #define CONFIG_ENV_SECT_SIZE            0x10000
 172 #elif defined(CONFIG_TARGET_T1023RDB)
 173 #define CONFIG_ENV_SECT_SIZE            0x40000
 174 #endif
 175 #elif defined(CONFIG_SDCARD)
 176 #define CONFIG_SYS_EXTRA_ENV_RELOC
 177 #define CONFIG_SYS_MMC_ENV_DEV          0
 178 #define CONFIG_ENV_SIZE                 0x2000
 179 #define CONFIG_ENV_OFFSET               (512 * 0x800)
 180 #elif defined(CONFIG_NAND)
 181 #define CONFIG_SYS_EXTRA_ENV_RELOC
 182 #define CONFIG_ENV_SIZE                 0x2000
 183 #if defined(CONFIG_TARGET_T1024RDB)
 184 #define CONFIG_ENV_OFFSET               (2 * CONFIG_SYS_NAND_BLOCK_SIZE)
 185 #elif defined(CONFIG_TARGET_T1023RDB)
 186 #define CONFIG_ENV_OFFSET               (10 * CONFIG_SYS_NAND_BLOCK_SIZE)
 187 #endif
 188 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 189 #define CONFIG_ENV_IS_IN_REMOTE
 190 #define CONFIG_ENV_ADDR         0xffe20000
 191 #define CONFIG_ENV_SIZE         0x2000
 192 #elif defined(CONFIG_ENV_IS_NOWHERE)
 193 #define CONFIG_ENV_SIZE         0x2000
 194 #else
 195 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 196 #define CONFIG_ENV_SIZE         0x2000
 197 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 198 #endif
 199
 200 #ifndef __ASSEMBLY__
 201 unsigned long get_board_sys_clk(void);
 202 unsigned long get_board_ddr_clk(void);
 203 #endif
 204
 205 #define CONFIG_SYS_CLK_FREQ     100000000
 206 #define CONFIG_DDR_CLK_FREQ     100000000
 207
 208 /*
 209  * These can be toggled for performance analysis, otherwise use default.
 210  */
 211 #define CONFIG_SYS_CACHE_STASHING
 212 #define CONFIG_BACKSIDE_L2_CACHE
 213 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
 214 #define CONFIG_BTB                      /* toggle branch predition */
 215 #define CONFIG_DDR_ECC
 216 #ifdef CONFIG_DDR_ECC
 217 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 218 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 219 #endif
 220
 221 #define CONFIG_SYS_MEMTEST_START        0x00200000 /* memtest works on */
 222 #define CONFIG_SYS_MEMTEST_END          0x00400000
 223 #define CONFIG_SYS_ALT_MEMTEST
 224 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 225
 226 /*
 227  *  Config the L3 Cache as L3 SRAM
 228  */
 229 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 230 #define CONFIG_SYS_L3_SIZE              (256 << 10)
 231 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
 232 #ifdef CONFIG_RAMBOOT_PBL
 233 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
 234 #endif
 235 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 236 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (30 << 10)
 237 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 238 #define CONFIG_SPL_RELOC_STACK_SIZE     (22 << 10)
 239
 240 #ifdef CONFIG_PHYS_64BIT
 241 #define CONFIG_SYS_DCSRBAR              0xf0000000
 242 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 243 #endif
 244
 245 /* EEPROM */
 246 #define CONFIG_ID_EEPROM
 247 #define CONFIG_SYS_I2C_EEPROM_NXID
 248 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 249 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50
 250 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  2
 251 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 252 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 253
 254 /*
 255  * DDR Setup
 256  */
 257 #define CONFIG_VERY_BIG_RAM
 258 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 259 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 260 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 261 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 262 #define CONFIG_FSL_DDR_INTERACTIVE
 263 #if defined(CONFIG_TARGET_T1024RDB)
 264 #define CONFIG_DDR_SPD
 265 #define CONFIG_SYS_SPD_BUS_NUM  0
 266 #define SPD_EEPROM_ADDRESS      0x51
 267 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 268 #elif defined(CONFIG_TARGET_T1023RDB)
 269 #define CONFIG_SYS_DDR_RAW_TIMING
 270 #define CONFIG_SYS_SDRAM_SIZE   2048
 271 #endif
 272
 273 /*
 274  * IFC Definitions
 275  */
 276 #define CONFIG_SYS_FLASH_BASE   0xe8000000
 277 #ifdef CONFIG_PHYS_64BIT
 278 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 279 #else
 280 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 281 #endif
 282
 283 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 284 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 285                                 CSPR_PORT_SIZE_16 | \
 286                                 CSPR_MSEL_NOR | \
 287                                 CSPR_V)
 288 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 289
 290 /* NOR Flash Timing Params */
 291 #if defined(CONFIG_TARGET_T1024RDB)
 292 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 293 #elif defined(CONFIG_TARGET_T1023RDB)
 294 #define CONFIG_SYS_NOR_CSOR    (CSOR_NOR_ADM_SHIFT(0) | \
 295                                 CSOR_NAND_TRHZ_80 | CSOR_NOR_ADM_SHFT_MODE_EN)
 296 #endif
 297 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 298                                 FTIM0_NOR_TEADC(0x5) | \
 299                                 FTIM0_NOR_TEAHC(0x5))
 300 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 301                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 302                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 303 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 304                                 FTIM2_NOR_TCH(0x4) | \
 305                                 FTIM2_NOR_TWPH(0x0E) | \
 306                                 FTIM2_NOR_TWP(0x1c))
 307 #define CONFIG_SYS_NOR_FTIM3    0x0
 308
 309 #define CONFIG_SYS_FLASH_QUIET_TEST
 310 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 311
 312 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 313 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 314 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 315 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 316
 317 #define CONFIG_SYS_FLASH_EMPTY_INFO
 318 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 319
 320 #ifdef CONFIG_TARGET_T1024RDB
 321 /* CPLD on IFC */
 322 #define CONFIG_SYS_CPLD_BASE            0xffdf0000
 323 #define CONFIG_SYS_CPLD_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
 324 #define CONFIG_SYS_CSPR2_EXT            (0xf)
 325 #define CONFIG_SYS_CSPR2                (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE) \
 326                                                 | CSPR_PORT_SIZE_8 \
 327                                                 | CSPR_MSEL_GPCM \
 328                                                 | CSPR_V)
 329 #define CONFIG_SYS_AMASK2               IFC_AMASK(64*1024)
 330 #define CONFIG_SYS_CSOR2                0x0
 331
 332 /* CPLD Timing parameters for IFC CS2 */
 333 #define CONFIG_SYS_CS2_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 334                                                 FTIM0_GPCM_TEADC(0x0e) | \
 335                                                 FTIM0_GPCM_TEAHC(0x0e))
 336 #define CONFIG_SYS_CS2_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 337                                                 FTIM1_GPCM_TRAD(0x1f))
 338 #define CONFIG_SYS_CS2_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 339                                                 FTIM2_GPCM_TCH(0x8) | \
 340                                                 FTIM2_GPCM_TWP(0x1f))
 341 #define CONFIG_SYS_CS2_FTIM3            0x0
 342 #endif
 343
 344 /* NAND Flash on IFC */
 345 #define CONFIG_NAND_FSL_IFC
 346 #define CONFIG_SYS_NAND_BASE            0xff800000
 347 #ifdef CONFIG_PHYS_64BIT
 348 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 349 #else
 350 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 351 #endif
 352 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 353 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 354                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 355                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 356                                 | CSPR_V)
 357 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 358
 359 #if defined(CONFIG_TARGET_T1024RDB)
 360 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 361                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 362                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 363                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 364                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 365                                 | CSOR_NAND_SPRZ_224    /* Spare size = 224 */ \
 366                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 367 #define CONFIG_SYS_NAND_BLOCK_SIZE      (512 * 1024)
 368 #elif defined(CONFIG_TARGET_T1023RDB)
 369 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 370                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 371                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 372                                 | CSOR_NAND_RAL_3       /* RAL 3Bytes */ \
 373                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 374                                 | CSOR_NAND_SPRZ_128    /* Spare size = 128 */ \
 375                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 376 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 377 #endif
 378
 379 #define CONFIG_SYS_NAND_ONFI_DETECTION
 380 /* ONFI NAND Flash mode0 Timing Params */
 381 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 382                                         FTIM0_NAND_TWP(0x18)   | \
 383                                         FTIM0_NAND_TWCHT(0x07) | \
 384                                         FTIM0_NAND_TWH(0x0a))
 385 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 386                                         FTIM1_NAND_TWBE(0x39)  | \
 387                                         FTIM1_NAND_TRR(0x0e)   | \
 388                                         FTIM1_NAND_TRP(0x18))
 389 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 390                                         FTIM2_NAND_TREH(0x0a) | \
 391                                         FTIM2_NAND_TWHRE(0x1e))
 392 #define CONFIG_SYS_NAND_FTIM3           0x0
 393
 394 #define CONFIG_SYS_NAND_DDR_LAW         11
 395 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 396 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 397 #define CONFIG_CMD_NAND
 398
 399 #if defined(CONFIG_NAND)
 400 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 401 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 402 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 403 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 404 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 405 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 406 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 407 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 408 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 409 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR0_CSPR
 410 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 411 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 412 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 413 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 414 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 415 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 416 #else
 417 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 418 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 419 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 420 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 421 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 422 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 423 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 424 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 425 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NAND_CSPR_EXT
 426 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 427 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 428 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 429 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 430 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 431 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 432 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 433 #endif
 434
 435 #ifdef CONFIG_SPL_BUILD
 436 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SPL_TEXT_BASE
 437 #else
 438 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 439 #endif
 440
 441 #if defined(CONFIG_RAMBOOT_PBL)
 442 #define CONFIG_SYS_RAMBOOT
 443 #endif
 444
 445 #define CONFIG_BOARD_EARLY_INIT_R
 446 #define CONFIG_MISC_INIT_R
 447
 448 #define CONFIG_HWCONFIG
 449
 450 /* define to use L1 as initial stack */
 451 #define CONFIG_L1_INIT_RAM
 452 #define CONFIG_SYS_INIT_RAM_LOCK
 453 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 454 #ifdef CONFIG_PHYS_64BIT
 455 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 456 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 457 /* The assembler doesn't like typecast */
 458 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 459         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 460           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 461 #else
 462 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   0xfe03c000 /* Initial L1 address */
 463 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 464 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 465 #endif
 466 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 467
 468 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 469                                         GENERATED_GBL_DATA_SIZE)
 470 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 471
 472 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 473 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
 474
 475 /* Serial Port */
 476 #define CONFIG_CONS_INDEX       1
 477 #define CONFIG_SYS_NS16550_SERIAL
 478 #define CONFIG_SYS_NS16550_REG_SIZE     1
 479 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 480
 481 #define CONFIG_SYS_BAUDRATE_TABLE       \
 482         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 483
 484 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 485 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 486 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 487 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 488
 489 /* Video */
 490 #undef CONFIG_FSL_DIU_FB        /* RDB doesn't support DIU */
 491 #ifdef CONFIG_FSL_DIU_FB
 492 #define CONFIG_SYS_DIU_ADDR     (CONFIG_SYS_CCSRBAR + 0x180000)
 493 #define CONFIG_VIDEO_LOGO
 494 #define CONFIG_VIDEO_BMP_LOGO
 495 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
 496 /*
 497  * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so
 498  * disable empty flash sector detection, which is I/O-intensive.
 499  */
 500 #undef CONFIG_SYS_FLASH_EMPTY_INFO
 501 #endif
 502
 503 /* I2C */
 504 #define CONFIG_SYS_I2C
 505 #define CONFIG_SYS_I2C_FSL              /* Use FSL common I2C driver */
 506 #define CONFIG_SYS_FSL_I2C_SPEED        50000   /* I2C speed in Hz */
 507 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 508 #define CONFIG_SYS_FSL_I2C2_SPEED       50000   /* I2C speed in Hz */
 509 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 510 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 511 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 512
 513 #define I2C_PCA6408_BUS_NUM             1
 514 #define I2C_PCA6408_ADDR                0x20
 515
 516 /* I2C bus multiplexer */
 517 #define I2C_MUX_CH_DEFAULT      0x8
 518
 519 /*
 520  * RTC configuration
 521  */
 522 #define RTC
 523 #define CONFIG_RTC_DS1337       1
 524 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
 525
 526 /*
 527  * eSPI - Enhanced SPI
 528  */
 529 #define CONFIG_SPI_FLASH_BAR
 530 #define CONFIG_SF_DEFAULT_SPEED 10000000
 531 #define CONFIG_SF_DEFAULT_MODE  0
 532
 533 /*
 534  * General PCIe
 535  * Memory space is mapped 1-1, but I/O space must start from 0.
 536  */
 537 #define CONFIG_PCIE1            /* PCIE controller 1 */
 538 #define CONFIG_PCIE2            /* PCIE controller 2 */
 539 #define CONFIG_PCIE3            /* PCIE controller 3 */
 540 #ifdef CONFIG_ARCH_T1040
 541 #define CONFIG_PCIE4            /* PCIE controller 4 */
 542 #endif
 543 #define CONFIG_FSL_PCI_INIT     /* Use common FSL init code */
 544 #define CONFIG_SYS_PCI_64BIT    /* enable 64-bit PCI resources */
 545 #define CONFIG_PCI_INDIRECT_BRIDGE
 546
 547 #ifdef CONFIG_PCI
 548 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 549 #ifdef CONFIG_PCIE1
 550 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 551 #ifdef CONFIG_PHYS_64BIT
 552 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 553 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 554 #else
 555 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 556 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 557 #endif
 558 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000      /* 256M */
 559 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 560 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 561 #ifdef CONFIG_PHYS_64BIT
 562 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 563 #else
 564 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
 565 #endif
 566 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 567 #endif
 568
 569 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 570 #ifdef CONFIG_PCIE2
 571 #define CONFIG_SYS_PCIE2_MEM_VIRT       0x90000000
 572 #ifdef CONFIG_PHYS_64BIT
 573 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 574 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc10000000ull
 575 #else
 576 #define CONFIG_SYS_PCIE2_MEM_BUS        0x90000000
 577 #define CONFIG_SYS_PCIE2_MEM_PHYS       0x90000000
 578 #endif
 579 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000      /* 256M */
 580 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 581 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 582 #ifdef CONFIG_PHYS_64BIT
 583 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 584 #else
 585 #define CONFIG_SYS_PCIE2_IO_PHYS        0xf8010000
 586 #endif
 587 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 588 #endif
 589
 590 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 591 #ifdef CONFIG_PCIE3
 592 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xa0000000
 593 #ifdef CONFIG_PHYS_64BIT
 594 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 595 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc20000000ull
 596 #else
 597 #define CONFIG_SYS_PCIE3_MEM_BUS        0xa0000000
 598 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xa0000000
 599 #endif
 600 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x10000000      /* 256M */
 601 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 602 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 603 #ifdef CONFIG_PHYS_64BIT
 604 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 605 #else
 606 #define CONFIG_SYS_PCIE3_IO_PHYS        0xf8020000
 607 #endif
 608 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 609 #endif
 610
 611 /* controller 4, Base address 203000, to be removed */
 612 #ifdef CONFIG_PCIE4
 613 #define CONFIG_SYS_PCIE4_MEM_VIRT       0xb0000000
 614 #ifdef CONFIG_PHYS_64BIT
 615 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 616 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc30000000ull
 617 #else
 618 #define CONFIG_SYS_PCIE4_MEM_BUS        0xb0000000
 619 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xb0000000
 620 #endif
 621 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x10000000      /* 256M */
 622 #define CONFIG_SYS_PCIE4_IO_VIRT        0xf8030000
 623 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 624 #ifdef CONFIG_PHYS_64BIT
 625 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 626 #else
 627 #define CONFIG_SYS_PCIE4_IO_PHYS        0xf8030000
 628 #endif
 629 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 630 #endif
 631
 632 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 633 #endif  /* CONFIG_PCI */
 634
 635 /*
 636  * USB
 637  */
 638 #define CONFIG_HAS_FSL_DR_USB
 639
 640 #ifdef CONFIG_HAS_FSL_DR_USB
 641 #define CONFIG_USB_EHCI_FSL
 642 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 643 #endif
 644
 645 /*
 646  * SDHC
 647  */
 648 #ifdef CONFIG_MMC
 649 #define CONFIG_FSL_ESDHC
 650 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 651 #endif
 652
 653 /* Qman/Bman */
 654 #ifndef CONFIG_NOBQFMAN
 655 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 656 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 657 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 658 #ifdef CONFIG_PHYS_64BIT
 659 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 660 #else
 661 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 662 #endif
 663 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 664 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 665 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 666 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 667 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 668 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 669                                         CONFIG_SYS_BMAN_CENA_SIZE)
 670 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 671 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 672 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 673 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 674 #ifdef CONFIG_PHYS_64BIT
 675 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 676 #else
 677 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 678 #endif
 679 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 680 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 681 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 682 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 683 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 684 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 685                                         CONFIG_SYS_QMAN_CENA_SIZE)
 686 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 687 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 688
 689 #define CONFIG_SYS_DPAA_FMAN
 690
 691 #ifdef CONFIG_TARGET_T1024RDB
 692 #define CONFIG_QE
 693 #define CONFIG_U_QE
 694 #endif
 695 /* Default address of microcode for the Linux FMan driver */
 696 #if defined(CONFIG_SPIFLASH)
 697 /*
 698  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 699  * env, so we got 0x110000.
 700  */
 701 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 702 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 703 #define CONFIG_SYS_QE_FW_ADDR   0x130000
 704 #elif defined(CONFIG_SDCARD)
 705 /*
 706  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 707  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 708  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080(0x820).
 709  */
 710 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 711 #define CONFIG_SYS_FMAN_FW_ADDR         (512 * 0x820)
 712 #define CONFIG_SYS_QE_FW_ADDR           (512 * 0x920)
 713 #elif defined(CONFIG_NAND)
 714 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 715 #if defined(CONFIG_TARGET_T1024RDB)
 716 #define CONFIG_SYS_FMAN_FW_ADDR         (3 * CONFIG_SYS_NAND_BLOCK_SIZE)
 717 #define CONFIG_SYS_QE_FW_ADDR           (4 * CONFIG_SYS_NAND_BLOCK_SIZE)
 718 #elif defined(CONFIG_TARGET_T1023RDB)
 719 #define CONFIG_SYS_FMAN_FW_ADDR         (11 * CONFIG_SYS_NAND_BLOCK_SIZE)
 720 #define CONFIG_SYS_QE_FW_ADDR           (12 * CONFIG_SYS_NAND_BLOCK_SIZE)
 721 #endif
 722 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 723 /*
 724  * Slave has no ucode locally, it can fetch this from remote. When implementing
 725  * in two corenet boards, slave's ucode could be stored in master's memory
 726  * space, the address can be mapped from slave TLB->slave LAW->
 727  * slave SRIO or PCIE outbound window->master inbound window->
 728  * master LAW->the ucode address in master's memory space.
 729  */
 730 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 731 #define CONFIG_SYS_FMAN_FW_ADDR         0xFFE00000
 732 #else
 733 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 734 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 735 #define CONFIG_SYS_QE_FW_ADDR           0xEFE00000
 736 #endif
 737 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 738 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 739 #endif /* CONFIG_NOBQFMAN */
 740
 741 #ifdef CONFIG_SYS_DPAA_FMAN
 742 #define CONFIG_FMAN_ENET
 743 #define CONFIG_PHYLIB_10G
 744 #define CONFIG_PHY_REALTEK
 745 #define CONFIG_PHY_AQUANTIA
 746 #if defined(CONFIG_TARGET_T1024RDB)
 747 #define RGMII_PHY1_ADDR         0x2
 748 #define RGMII_PHY2_ADDR         0x6
 749 #define SGMII_AQR_PHY_ADDR      0x2
 750 #define FM1_10GEC1_PHY_ADDR     0x1
 751 #elif defined(CONFIG_TARGET_T1023RDB)
 752 #define RGMII_PHY1_ADDR         0x1
 753 #define SGMII_RTK_PHY_ADDR      0x3
 754 #define SGMII_AQR_PHY_ADDR      0x2
 755 #endif
 756 #endif
 757
 758 #ifdef CONFIG_FMAN_ENET
 759 #define CONFIG_MII              /* MII PHY management */
 760 #define CONFIG_ETHPRIME         "FM1@DTSEC4"
 761 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 762 #endif
 763
 764 /*
 765  * Dynamic MTD Partition support with mtdparts
 766  */
 767 #ifdef CONFIG_MTD_NOR_FLASH
 768 #define CONFIG_MTD_DEVICE
 769 #define CONFIG_MTD_PARTITIONS
 770 #define CONFIG_FLASH_CFI_MTD
 771 #define MTDIDS_DEFAULT "nor0=fe8000000.nor,nand0=fff800000.flash," \
 772                         "spi0=spife110000.1"
 773 #define MTDPARTS_DEFAULT "mtdparts=fe8000000.nor:1m(uboot),5m(kernel)," \
 774                         "128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot)," \
 775                         "5m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:" \
 776                         "1m(uboot),5m(kernel),128k(dtb),-(user)"
 777 #endif
 778
 779 /*
 780  * Environment
 781  */
 782 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 783 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 784
 785 /*
 786  * Command line configuration.
 787  */
 788 #define CONFIG_CMD_REGINFO
 789
 790 #ifdef CONFIG_PCI
 791 #define CONFIG_CMD_PCI
 792 #endif
 793
 794 /*
 795  * Miscellaneous configurable options
 796  */
 797 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 798 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 799 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 800 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 801 #ifdef CONFIG_CMD_KGDB
 802 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 803 #else
 804 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 805 #endif
 806 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 807 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 808 #define CONFIG_SYS_BARGSIZE  CONFIG_SYS_CBSIZE  /* Boot Argument Buffer Size */
 809
 810 /*
 811  * For booting Linux, the board info and command line data
 812  * have to be in the first 64 MB of memory, since this is
 813  * the maximum mapped by the Linux kernel during initialization.
 814  */
 815 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 816 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 817
 818 #ifdef CONFIG_CMD_KGDB
 819 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 820 #endif
 821
 822 /*
 823  * Environment Configuration
 824  */
 825 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 826 #define CONFIG_BOOTFILE         "uImage"
 827 #define CONFIG_UBOOTPATH        u-boot.bin /* U-Boot image on TFTP server */
 828 #define CONFIG_LOADADDR         1000000 /* default location for tftp, bootm */
 829 #define __USB_PHY_TYPE          utmi
 830
 831 #ifdef CONFIG_ARCH_T1024
 832 #define CONFIG_BOARDNAME t1024rdb
 833 #define BANK_INTLV cs0_cs1
 834 #else
 835 #define CONFIG_BOARDNAME t1023rdb
 836 #define BANK_INTLV  null
 837 #endif
 838
 839 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 840         "hwconfig=fsl_ddr:ctlr_intlv=cacheline,"                \
 841         "bank_intlv=" __stringify(BANK_INTLV) "\0"              \
 842         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"  \
 843         "ramdiskfile=" __stringify(CONFIG_BOARDNAME) "/ramdisk.uboot\0" \
 844         "fdtfile=" __stringify(CONFIG_BOARDNAME) "/"            \
 845         __stringify(CONFIG_BOARDNAME) ".dtb\0"                  \
 846         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 847         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 848         "bootargs=root=/dev/ram rw console=ttyS0,115200\0" \
 849         "netdev=eth0\0"                                         \
 850         "tftpflash=tftpboot $loadaddr $uboot && "               \
 851         "protect off $ubootaddr +$filesize && "                 \
 852         "erase $ubootaddr +$filesize && "                       \
 853         "cp.b $loadaddr $ubootaddr $filesize && "               \
 854         "protect on $ubootaddr +$filesize && "                  \
 855         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 856         "consoledev=ttyS0\0"                                    \
 857         "ramdiskaddr=2000000\0"                                 \
 858         "fdtaddr=1e00000\0"                                     \
 859         "bdev=sda3\0"
 860
 861 #define CONFIG_LINUX                                    \
 862         "setenv bootargs root=/dev/ram rw "             \
 863         "console=$consoledev,$baudrate $othbootargs;"   \
 864         "setenv ramdiskaddr 0x02000000;"                \
 865         "setenv fdtaddr 0x00c00000;"                    \
 866         "setenv loadaddr 0x1000000;"                    \
 867         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 868
 869 #define CONFIG_NFSBOOTCOMMAND                   \
 870         "setenv bootargs root=/dev/nfs rw "     \
 871         "nfsroot=$serverip:$rootpath "          \
 872         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 873         "console=$consoledev,$baudrate $othbootargs;"   \
 874         "tftp $loadaddr $bootfile;"             \
 875         "tftp $fdtaddr $fdtfile;"               \
 876         "bootm $loadaddr - $fdtaddr"
 877
 878 #define CONFIG_BOOTCOMMAND      CONFIG_LINUX
 879
 880 #include <asm/fsl_secure_boot.h>
 881
 882 #endif  /* __T1024RDB_H */