include/configs/T102xRDB.h

   1 /*
   2  * Copyright 2014 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * T1024/T1023 RDB board configuration file
   9  */
  10
  11 #ifndef __T1024RDB_H
  12 #define __T1024RDB_H
  13
  14 /* High Level Configuration Options */
  15 #define CONFIG_DISPLAY_BOARDINFO
  16 #define CONFIG_BOOKE
  17 #define CONFIG_E500                     /* BOOKE e500 family */
  18 #define CONFIG_E500MC                   /* BOOKE e500mc family */
  19 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  20 #define CONFIG_MP                       /* support multiple processors */
  21 #define CONFIG_ENABLE_36BIT_PHYS
  22
  23 #ifdef CONFIG_PHYS_64BIT
  24 #define CONFIG_ADDR_MAP         1
  25 #define CONFIG_SYS_NUM_ADDR_MAP 64      /* number of TLB1 entries */
  26 #endif
  27
  28 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  29 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
  30 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
  31
  32 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  33 #define CONFIG_ENV_OVERWRITE
  34
  35 #define CONFIG_FSL_CAAM                 /* Enable SEC/CAAM */
  36
  37 /* support deep sleep */
  38 #ifdef CONFIG_PPC_T1024
  39 #define CONFIG_DEEP_SLEEP
  40 #endif
  41 #if defined(CONFIG_DEEP_SLEEP)
  42 #define CONFIG_SILENT_CONSOLE
  43 #define CONFIG_BOARD_EARLY_INIT_F
  44 #endif
  45
  46 #ifdef CONFIG_RAMBOOT_PBL
  47 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xrdb/t1024_pbi.cfg
  48 #if defined(CONFIG_T1024RDB)
  49 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1024_rcw.cfg
  50 #elif defined(CONFIG_T1023RDB)
  51 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1023_rcw.cfg
  52 #endif
  53 #define CONFIG_SPL_FLUSH_IMAGE
  54 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  55 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  56 #define CONFIG_SYS_TEXT_BASE            0x30001000
  57 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
  58 #define CONFIG_SPL_PAD_TO               0x40000
  59 #define CONFIG_SPL_MAX_SIZE             0x28000
  60 #define RESET_VECTOR_OFFSET             0x27FFC
  61 #define BOOT_PAGE_OFFSET                0x27000
  62 #ifdef CONFIG_SPL_BUILD
  63 #define CONFIG_SPL_SKIP_RELOCATE
  64 #define CONFIG_SPL_COMMON_INIT_DDR
  65 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  66 #define CONFIG_SYS_NO_FLASH
  67 #endif
  68
  69 #ifdef CONFIG_NAND
  70 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  71 #define CONFIG_SYS_NAND_U_BOOT_DST      0x30000000
  72 #define CONFIG_SYS_NAND_U_BOOT_START    0x30000000
  73 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
  74 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  75 #define CONFIG_SPL_NAND_BOOT
  76 #endif
  77
  78 #ifdef CONFIG_SPIFLASH
  79 #define CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
  80 #define CONFIG_SPL_SPI_FLASH_MINIMAL
  81 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (768 << 10)
  82 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x30000000)
  83 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x30000000)
  84 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (256 << 10)
  85 #define CONFIG_SYS_LDSCRIPT             "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  86 #ifndef CONFIG_SPL_BUILD
  87 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  88 #endif
  89 #define CONFIG_SPL_SPI_BOOT
  90 #endif
  91
  92 #ifdef CONFIG_SDCARD
  93 #define CONFIG_RESET_VECTOR_ADDRESS     0x30000FFC
  94 #define CONFIG_SPL_MMC_MINIMAL
  95 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
  96 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x30000000)
  97 #define CONFIG_SYS_MMC_U_BOOT_START     (0x30000000)
  98 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
  99 #define CONFIG_SYS_LDSCRIPT             "arch/powerpc/cpu/mpc85xx/u-boot.lds"
 100 #ifndef CONFIG_SPL_BUILD
 101 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 102 #endif
 103 #define CONFIG_SPL_MMC_BOOT
 104 #endif
 105
 106 #endif /* CONFIG_RAMBOOT_PBL */
 107
 108 #ifndef CONFIG_SYS_TEXT_BASE
 109 #define CONFIG_SYS_TEXT_BASE    0xeff40000
 110 #endif
 111
 112 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 113 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
 114 #endif
 115
 116 #ifndef CONFIG_SYS_NO_FLASH
 117 #define CONFIG_FLASH_CFI_DRIVER
 118 #define CONFIG_SYS_FLASH_CFI
 119 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 120 #endif
 121
 122 /* PCIe Boot - Master */
 123 #define CONFIG_SRIO_PCIE_BOOT_MASTER
 124 /*
 125  * for slave u-boot IMAGE instored in master memory space,
 126  * PHYS must be aligned based on the SIZE
 127  */
 128 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
 129 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE     0x100000 /* 1M */
 130 #ifdef CONFIG_PHYS_64BIT
 131 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
 132 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
 133 #else
 134 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xef200000
 135 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0xfff00000
 136 #endif
 137 /*
 138  * for slave UCODE and ENV instored in master memory space,
 139  * PHYS must be aligned based on the SIZE
 140  */
 141 #ifdef CONFIG_PHYS_64BIT
 142 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
 143 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS  0x3ffe00000ull
 144 #else
 145 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xef100000
 146 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS  0xffe00000
 147 #endif
 148 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE    0x40000 /* 256K */
 149 /* slave core release by master*/
 150 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET        0xe00e4
 151 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK      0x00000001 /* release core 0 */
 152
 153 /* PCIe Boot - Slave */
 154 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 155 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 156 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 157                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 158 /* Set 1M boot space for PCIe boot */
 159 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
 160 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS       \
 161                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
 162 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
 163 #define CONFIG_SYS_NO_FLASH
 164 #endif
 165
 166 #if defined(CONFIG_SPIFLASH)
 167 #define CONFIG_SYS_EXTRA_ENV_RELOC
 168 #define CONFIG_ENV_IS_IN_SPI_FLASH
 169 #define CONFIG_ENV_SPI_BUS              0
 170 #define CONFIG_ENV_SPI_CS               0
 171 #define CONFIG_ENV_SPI_MAX_HZ           10000000
 172 #define CONFIG_ENV_SPI_MODE             0
 173 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 174 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 175 #if defined(CONFIG_T1024RDB)
 176 #define CONFIG_ENV_SECT_SIZE            0x10000
 177 #elif defined(CONFIG_T1023RDB)
 178 #define CONFIG_ENV_SECT_SIZE            0x40000
 179 #endif
 180 #elif defined(CONFIG_SDCARD)
 181 #define CONFIG_SYS_EXTRA_ENV_RELOC
 182 #define CONFIG_ENV_IS_IN_MMC
 183 #define CONFIG_SYS_MMC_ENV_DEV          0
 184 #define CONFIG_ENV_SIZE                 0x2000
 185 #define CONFIG_ENV_OFFSET               (512 * 0x800)
 186 #elif defined(CONFIG_NAND)
 187 #define CONFIG_SYS_EXTRA_ENV_RELOC
 188 #define CONFIG_ENV_IS_IN_NAND
 189 #define CONFIG_ENV_SIZE                 0x2000
 190 #if defined(CONFIG_T1024RDB)
 191 #define CONFIG_ENV_OFFSET               (2 * CONFIG_SYS_NAND_BLOCK_SIZE)
 192 #elif defined(CONFIG_T1023RDB)
 193 #define CONFIG_ENV_OFFSET               (10 * CONFIG_SYS_NAND_BLOCK_SIZE)
 194 #endif
 195 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 196 #define CONFIG_ENV_IS_IN_REMOTE
 197 #define CONFIG_ENV_ADDR         0xffe20000
 198 #define CONFIG_ENV_SIZE         0x2000
 199 #elif defined(CONFIG_ENV_IS_NOWHERE)
 200 #define CONFIG_ENV_SIZE         0x2000
 201 #else
 202 #define CONFIG_ENV_IS_IN_FLASH
 203 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 204 #define CONFIG_ENV_SIZE         0x2000
 205 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 206 #endif
 207
 208 #ifndef __ASSEMBLY__
 209 unsigned long get_board_sys_clk(void);
 210 unsigned long get_board_ddr_clk(void);
 211 #endif
 212
 213 #define CONFIG_SYS_CLK_FREQ     100000000
 214 #define CONFIG_DDR_CLK_FREQ     100000000
 215
 216 /*
 217  * These can be toggled for performance analysis, otherwise use default.
 218  */
 219 #define CONFIG_SYS_CACHE_STASHING
 220 #define CONFIG_BACKSIDE_L2_CACHE
 221 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
 222 #define CONFIG_BTB                      /* toggle branch predition */
 223 #define CONFIG_DDR_ECC
 224 #ifdef CONFIG_DDR_ECC
 225 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 226 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 227 #endif
 228
 229 #define CONFIG_SYS_MEMTEST_START        0x00200000 /* memtest works on */
 230 #define CONFIG_SYS_MEMTEST_END          0x00400000
 231 #define CONFIG_SYS_ALT_MEMTEST
 232 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 233
 234 /*
 235  *  Config the L3 Cache as L3 SRAM
 236  */
 237 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 238 #define CONFIG_SYS_L3_SIZE              (256 << 10)
 239 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
 240 #ifdef CONFIG_RAMBOOT_PBL
 241 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
 242 #endif
 243 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 244 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (30 << 10)
 245 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 246 #define CONFIG_SPL_RELOC_STACK_SIZE     (22 << 10)
 247
 248 #ifdef CONFIG_PHYS_64BIT
 249 #define CONFIG_SYS_DCSRBAR              0xf0000000
 250 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 251 #endif
 252
 253 /* EEPROM */
 254 #define CONFIG_ID_EEPROM
 255 #define CONFIG_SYS_I2C_EEPROM_NXID
 256 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 257 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50
 258 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  2
 259 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 260 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 261
 262 /*
 263  * DDR Setup
 264  */
 265 #define CONFIG_VERY_BIG_RAM
 266 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 267 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 268 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 269 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 270 #define CONFIG_FSL_DDR_INTERACTIVE
 271 #if defined(CONFIG_T1024RDB)
 272 #define CONFIG_DDR_SPD
 273 #define CONFIG_SYS_FSL_DDR3
 274 #define CONFIG_SYS_SPD_BUS_NUM  0
 275 #define SPD_EEPROM_ADDRESS      0x51
 276 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 277 #elif defined(CONFIG_T1023RDB)
 278 #define CONFIG_SYS_FSL_DDR4
 279 #define CONFIG_SYS_DDR_RAW_TIMING
 280 #define CONFIG_SYS_SDRAM_SIZE   2048
 281 #endif
 282
 283 /*
 284  * IFC Definitions
 285  */
 286 #define CONFIG_SYS_FLASH_BASE   0xe8000000
 287 #ifdef CONFIG_PHYS_64BIT
 288 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 289 #else
 290 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 291 #endif
 292
 293 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 294 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 295                                 CSPR_PORT_SIZE_16 | \
 296                                 CSPR_MSEL_NOR | \
 297                                 CSPR_V)
 298 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 299
 300 /* NOR Flash Timing Params */
 301 #if defined(CONFIG_T1024RDB)
 302 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 303 #elif defined(CONFIG_T1023RDB)
 304 #define CONFIG_SYS_NOR_CSOR    (CSOR_NOR_ADM_SHIFT(0) | \
 305                                 CSOR_NAND_TRHZ_80 | CSOR_NOR_ADM_SHFT_MODE_EN)
 306 #endif
 307 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 308                                 FTIM0_NOR_TEADC(0x5) | \
 309                                 FTIM0_NOR_TEAHC(0x5))
 310 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 311                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 312                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 313 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 314                                 FTIM2_NOR_TCH(0x4) | \
 315                                 FTIM2_NOR_TWPH(0x0E) | \
 316                                 FTIM2_NOR_TWP(0x1c))
 317 #define CONFIG_SYS_NOR_FTIM3    0x0
 318
 319 #define CONFIG_SYS_FLASH_QUIET_TEST
 320 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 321
 322 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 323 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 324 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 325 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 326
 327 #define CONFIG_SYS_FLASH_EMPTY_INFO
 328 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 329
 330 #ifdef CONFIG_T1024RDB
 331 /* CPLD on IFC */
 332 #define CONFIG_SYS_CPLD_BASE            0xffdf0000
 333 #define CONFIG_SYS_CPLD_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
 334 #define CONFIG_SYS_CSPR2_EXT            (0xf)
 335 #define CONFIG_SYS_CSPR2                (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE) \
 336                                                 | CSPR_PORT_SIZE_8 \
 337                                                 | CSPR_MSEL_GPCM \
 338                                                 | CSPR_V)
 339 #define CONFIG_SYS_AMASK2               IFC_AMASK(64*1024)
 340 #define CONFIG_SYS_CSOR2                0x0
 341
 342 /* CPLD Timing parameters for IFC CS2 */
 343 #define CONFIG_SYS_CS2_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 344                                                 FTIM0_GPCM_TEADC(0x0e) | \
 345                                                 FTIM0_GPCM_TEAHC(0x0e))
 346 #define CONFIG_SYS_CS2_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 347                                                 FTIM1_GPCM_TRAD(0x1f))
 348 #define CONFIG_SYS_CS2_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 349                                                 FTIM2_GPCM_TCH(0x8) | \
 350                                                 FTIM2_GPCM_TWP(0x1f))
 351 #define CONFIG_SYS_CS2_FTIM3            0x0
 352 #endif
 353
 354 /* NAND Flash on IFC */
 355 #define CONFIG_NAND_FSL_IFC
 356 #define CONFIG_SYS_NAND_BASE            0xff800000
 357 #ifdef CONFIG_PHYS_64BIT
 358 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 359 #else
 360 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 361 #endif
 362 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 363 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 364                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 365                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 366                                 | CSPR_V)
 367 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 368
 369 #if defined(CONFIG_T1024RDB)
 370 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 371                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 372                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 373                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 374                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 375                                 | CSOR_NAND_SPRZ_224    /* Spare size = 224 */ \
 376                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 377 #define CONFIG_SYS_NAND_BLOCK_SIZE      (512 * 1024)
 378 #elif defined(CONFIG_T1023RDB)
 379 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 380                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 381                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 382                                 | CSOR_NAND_RAL_3       /* RAL 3Bytes */ \
 383                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 384                                 | CSOR_NAND_SPRZ_128    /* Spare size = 128 */ \
 385                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 386 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 387 #endif
 388
 389 #define CONFIG_SYS_NAND_ONFI_DETECTION
 390 /* ONFI NAND Flash mode0 Timing Params */
 391 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 392                                         FTIM0_NAND_TWP(0x18)   | \
 393                                         FTIM0_NAND_TWCHT(0x07) | \
 394                                         FTIM0_NAND_TWH(0x0a))
 395 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 396                                         FTIM1_NAND_TWBE(0x39)  | \
 397                                         FTIM1_NAND_TRR(0x0e)   | \
 398                                         FTIM1_NAND_TRP(0x18))
 399 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 400                                         FTIM2_NAND_TREH(0x0a) | \
 401                                         FTIM2_NAND_TWHRE(0x1e))
 402 #define CONFIG_SYS_NAND_FTIM3           0x0
 403
 404 #define CONFIG_SYS_NAND_DDR_LAW         11
 405 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 406 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 407 #define CONFIG_CMD_NAND
 408
 409 #if defined(CONFIG_NAND)
 410 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 411 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 412 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 413 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 414 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 415 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 416 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 417 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 418 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 419 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR0_CSPR
 420 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 421 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 422 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 423 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 424 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 425 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 426 #else
 427 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 428 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 429 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 430 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 431 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 432 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 433 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 434 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 435 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NAND_CSPR_EXT
 436 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 437 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 438 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 439 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 440 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 441 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 442 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 443 #endif
 444
 445 #ifdef CONFIG_SPL_BUILD
 446 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SPL_TEXT_BASE
 447 #else
 448 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 449 #endif
 450
 451 #if defined(CONFIG_RAMBOOT_PBL)
 452 #define CONFIG_SYS_RAMBOOT
 453 #endif
 454
 455 #define CONFIG_BOARD_EARLY_INIT_R
 456 #define CONFIG_MISC_INIT_R
 457
 458 #define CONFIG_HWCONFIG
 459
 460 /* define to use L1 as initial stack */
 461 #define CONFIG_L1_INIT_RAM
 462 #define CONFIG_SYS_INIT_RAM_LOCK
 463 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 464 #ifdef CONFIG_PHYS_64BIT
 465 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 466 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 467 /* The assembler doesn't like typecast */
 468 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 469         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 470           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 471 #else
 472 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   0xfe03c000 /* Initial L1 address */
 473 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 474 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 475 #endif
 476 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 477
 478 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 479                                         GENERATED_GBL_DATA_SIZE)
 480 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 481
 482 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 483 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
 484
 485 /* Serial Port */
 486 #define CONFIG_CONS_INDEX       1
 487 #define CONFIG_SYS_NS16550_SERIAL
 488 #define CONFIG_SYS_NS16550_REG_SIZE     1
 489 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 490
 491 #define CONFIG_SYS_BAUDRATE_TABLE       \
 492         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 493
 494 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 495 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 496 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 497 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 498 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    /* determine from environment */
 499
 500 /* Video */
 501 #undef CONFIG_FSL_DIU_FB        /* RDB doesn't support DIU */
 502 #ifdef CONFIG_FSL_DIU_FB
 503 #define CONFIG_SYS_DIU_ADDR     (CONFIG_SYS_CCSRBAR + 0x180000)
 504 #define CONFIG_VIDEO
 505 #define CONFIG_CMD_BMP
 506 #define CONFIG_CFB_CONSOLE
 507 #define CONFIG_VIDEO_SW_CURSOR
 508 #define CONFIG_VGA_AS_SINGLE_DEVICE
 509 #define CONFIG_VIDEO_LOGO
 510 #define CONFIG_VIDEO_BMP_LOGO
 511 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
 512 /*
 513  * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so
 514  * disable empty flash sector detection, which is I/O-intensive.
 515  */
 516 #undef CONFIG_SYS_FLASH_EMPTY_INFO
 517 #endif
 518
 519 /* I2C */
 520 #define CONFIG_SYS_I2C
 521 #define CONFIG_SYS_I2C_FSL              /* Use FSL common I2C driver */
 522 #define CONFIG_SYS_FSL_I2C_SPEED        50000   /* I2C speed in Hz */
 523 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 524 #define CONFIG_SYS_FSL_I2C2_SPEED       50000   /* I2C speed in Hz */
 525 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 526 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 527 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 528
 529 #define I2C_PCA6408_BUS_NUM             1
 530 #define I2C_PCA6408_ADDR                0x20
 531
 532 /* I2C bus multiplexer */
 533 #define I2C_MUX_CH_DEFAULT      0x8
 534
 535 /*
 536  * RTC configuration
 537  */
 538 #define RTC
 539 #define CONFIG_RTC_DS1337       1
 540 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
 541
 542 /*
 543  * eSPI - Enhanced SPI
 544  */
 545 #define CONFIG_SPI_FLASH_BAR
 546 #define CONFIG_SF_DEFAULT_SPEED 10000000
 547 #define CONFIG_SF_DEFAULT_MODE  0
 548
 549 /*
 550  * General PCIe
 551  * Memory space is mapped 1-1, but I/O space must start from 0.
 552  */
 553 #define CONFIG_PCI              /* Enable PCI/PCIE */
 554 #define CONFIG_PCIE1            /* PCIE controller 1 */
 555 #define CONFIG_PCIE2            /* PCIE controller 2 */
 556 #define CONFIG_PCIE3            /* PCIE controller 3 */
 557 #ifdef CONFIG_PPC_T1040
 558 #define CONFIG_PCIE4            /* PCIE controller 4 */
 559 #endif
 560 #define CONFIG_FSL_PCI_INIT     /* Use common FSL init code */
 561 #define CONFIG_SYS_PCI_64BIT    /* enable 64-bit PCI resources */
 562 #define CONFIG_PCI_INDIRECT_BRIDGE
 563
 564 #ifdef CONFIG_PCI
 565 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 566 #ifdef CONFIG_PCIE1
 567 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 568 #ifdef CONFIG_PHYS_64BIT
 569 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 570 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 571 #else
 572 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 573 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 574 #endif
 575 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000      /* 256M */
 576 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 577 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 578 #ifdef CONFIG_PHYS_64BIT
 579 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 580 #else
 581 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
 582 #endif
 583 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 584 #endif
 585
 586 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 587 #ifdef CONFIG_PCIE2
 588 #define CONFIG_SYS_PCIE2_MEM_VIRT       0x90000000
 589 #ifdef CONFIG_PHYS_64BIT
 590 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 591 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc10000000ull
 592 #else
 593 #define CONFIG_SYS_PCIE2_MEM_BUS        0x90000000
 594 #define CONFIG_SYS_PCIE2_MEM_PHYS       0x90000000
 595 #endif
 596 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000      /* 256M */
 597 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 598 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 599 #ifdef CONFIG_PHYS_64BIT
 600 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 601 #else
 602 #define CONFIG_SYS_PCIE2_IO_PHYS        0xf8010000
 603 #endif
 604 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 605 #endif
 606
 607 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 608 #ifdef CONFIG_PCIE3
 609 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xa0000000
 610 #ifdef CONFIG_PHYS_64BIT
 611 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 612 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc20000000ull
 613 #else
 614 #define CONFIG_SYS_PCIE3_MEM_BUS        0xa0000000
 615 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xa0000000
 616 #endif
 617 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x10000000      /* 256M */
 618 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 619 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 620 #ifdef CONFIG_PHYS_64BIT
 621 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 622 #else
 623 #define CONFIG_SYS_PCIE3_IO_PHYS        0xf8020000
 624 #endif
 625 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 626 #endif
 627
 628 /* controller 4, Base address 203000, to be removed */
 629 #ifdef CONFIG_PCIE4
 630 #define CONFIG_SYS_PCIE4_MEM_VIRT       0xb0000000
 631 #ifdef CONFIG_PHYS_64BIT
 632 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 633 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc30000000ull
 634 #else
 635 #define CONFIG_SYS_PCIE4_MEM_BUS        0xb0000000
 636 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xb0000000
 637 #endif
 638 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x10000000      /* 256M */
 639 #define CONFIG_SYS_PCIE4_IO_VIRT        0xf8030000
 640 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 641 #ifdef CONFIG_PHYS_64BIT
 642 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 643 #else
 644 #define CONFIG_SYS_PCIE4_IO_PHYS        0xf8030000
 645 #endif
 646 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 647 #endif
 648
 649 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 650 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 651 #define CONFIG_DOS_PARTITION
 652 #endif  /* CONFIG_PCI */
 653
 654 /*
 655  * USB
 656  */
 657 #define CONFIG_HAS_FSL_DR_USB
 658
 659 #ifdef CONFIG_HAS_FSL_DR_USB
 660 #define CONFIG_USB_EHCI
 661 #define CONFIG_USB_EHCI_FSL
 662 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 663 #endif
 664
 665 /*
 666  * SDHC
 667  */
 668 #define CONFIG_MMC
 669 #ifdef CONFIG_MMC
 670 #define CONFIG_FSL_ESDHC
 671 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 672 #define CONFIG_GENERIC_MMC
 673 #define CONFIG_DOS_PARTITION
 674 #endif
 675
 676 /* Qman/Bman */
 677 #ifndef CONFIG_NOBQFMAN
 678 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 679 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 680 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 681 #ifdef CONFIG_PHYS_64BIT
 682 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 683 #else
 684 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 685 #endif
 686 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 687 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 688 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 689 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 690 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 691 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 692                                         CONFIG_SYS_BMAN_CENA_SIZE)
 693 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 694 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 695 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 696 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 697 #ifdef CONFIG_PHYS_64BIT
 698 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 699 #else
 700 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 701 #endif
 702 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 703 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 704 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 705 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 706 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 707 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 708                                         CONFIG_SYS_QMAN_CENA_SIZE)
 709 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 710 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 711
 712 #define CONFIG_SYS_DPAA_FMAN
 713
 714 #ifdef CONFIG_T1024RDB
 715 #define CONFIG_QE
 716 #define CONFIG_U_QE
 717 #endif
 718 /* Default address of microcode for the Linux FMan driver */
 719 #if defined(CONFIG_SPIFLASH)
 720 /*
 721  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 722  * env, so we got 0x110000.
 723  */
 724 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 725 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 726 #define CONFIG_SYS_QE_FW_ADDR   0x130000
 727 #elif defined(CONFIG_SDCARD)
 728 /*
 729  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 730  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 731  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080(0x820).
 732  */
 733 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 734 #define CONFIG_SYS_FMAN_FW_ADDR         (512 * 0x820)
 735 #define CONFIG_SYS_QE_FW_ADDR           (512 * 0x920)
 736 #elif defined(CONFIG_NAND)
 737 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 738 #if defined(CONFIG_T1024RDB)
 739 #define CONFIG_SYS_FMAN_FW_ADDR         (3 * CONFIG_SYS_NAND_BLOCK_SIZE)
 740 #define CONFIG_SYS_QE_FW_ADDR           (4 * CONFIG_SYS_NAND_BLOCK_SIZE)
 741 #elif defined(CONFIG_T1023RDB)
 742 #define CONFIG_SYS_FMAN_FW_ADDR         (11 * CONFIG_SYS_NAND_BLOCK_SIZE)
 743 #define CONFIG_SYS_QE_FW_ADDR           (12 * CONFIG_SYS_NAND_BLOCK_SIZE)
 744 #endif
 745 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 746 /*
 747  * Slave has no ucode locally, it can fetch this from remote. When implementing
 748  * in two corenet boards, slave's ucode could be stored in master's memory
 749  * space, the address can be mapped from slave TLB->slave LAW->
 750  * slave SRIO or PCIE outbound window->master inbound window->
 751  * master LAW->the ucode address in master's memory space.
 752  */
 753 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 754 #define CONFIG_SYS_FMAN_FW_ADDR         0xFFE00000
 755 #else
 756 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 757 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 758 #define CONFIG_SYS_QE_FW_ADDR           0xEFE00000
 759 #endif
 760 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 761 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 762 #endif /* CONFIG_NOBQFMAN */
 763
 764 #ifdef CONFIG_SYS_DPAA_FMAN
 765 #define CONFIG_FMAN_ENET
 766 #define CONFIG_PHYLIB_10G
 767 #define CONFIG_PHY_REALTEK
 768 #define CONFIG_PHY_AQUANTIA
 769 #if defined(CONFIG_T1024RDB)
 770 #define RGMII_PHY1_ADDR         0x2
 771 #define RGMII_PHY2_ADDR         0x6
 772 #define SGMII_AQR_PHY_ADDR      0x2
 773 #define FM1_10GEC1_PHY_ADDR     0x1
 774 #elif defined(CONFIG_T1023RDB)
 775 #define RGMII_PHY1_ADDR         0x1
 776 #define SGMII_RTK_PHY_ADDR      0x3
 777 #define SGMII_AQR_PHY_ADDR      0x2
 778 #endif
 779 #endif
 780
 781 #ifdef CONFIG_FMAN_ENET
 782 #define CONFIG_MII              /* MII PHY management */
 783 #define CONFIG_ETHPRIME         "FM1@DTSEC4"
 784 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 785 #endif
 786
 787 /*
 788  * Dynamic MTD Partition support with mtdparts
 789  */
 790 #ifndef CONFIG_SYS_NO_FLASH
 791 #define CONFIG_MTD_DEVICE
 792 #define CONFIG_MTD_PARTITIONS
 793 #define CONFIG_CMD_MTDPARTS
 794 #define CONFIG_FLASH_CFI_MTD
 795 #define MTDIDS_DEFAULT "nor0=fe8000000.nor,nand0=fff800000.flash," \
 796                         "spi0=spife110000.1"
 797 #define MTDPARTS_DEFAULT "mtdparts=fe8000000.nor:1m(uboot),5m(kernel)," \
 798                         "128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot)," \
 799                         "5m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:" \
 800                         "1m(uboot),5m(kernel),128k(dtb),-(user)"
 801 #endif
 802
 803 /*
 804  * Environment
 805  */
 806 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 807 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 808
 809 /*
 810  * Command line configuration.
 811  */
 812 #define CONFIG_CMD_DATE
 813 #define CONFIG_CMD_EEPROM
 814 #define CONFIG_CMD_ERRATA
 815 #define CONFIG_CMD_IRQ
 816 #define CONFIG_CMD_REGINFO
 817
 818 #ifdef CONFIG_PCI
 819 #define CONFIG_CMD_PCI
 820 #endif
 821
 822 /*
 823  * Miscellaneous configurable options
 824  */
 825 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 826 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 827 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 828 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 829 #ifdef CONFIG_CMD_KGDB
 830 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 831 #else
 832 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 833 #endif
 834 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 835 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 836 #define CONFIG_SYS_BARGSIZE  CONFIG_SYS_CBSIZE  /* Boot Argument Buffer Size */
 837
 838 /*
 839  * For booting Linux, the board info and command line data
 840  * have to be in the first 64 MB of memory, since this is
 841  * the maximum mapped by the Linux kernel during initialization.
 842  */
 843 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 844 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 845
 846 #ifdef CONFIG_CMD_KGDB
 847 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 848 #endif
 849
 850 /*
 851  * Environment Configuration
 852  */
 853 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 854 #define CONFIG_BOOTFILE         "uImage"
 855 #define CONFIG_UBOOTPATH        u-boot.bin /* U-Boot image on TFTP server */
 856 #define CONFIG_LOADADDR         1000000 /* default location for tftp, bootm */
 857 #define CONFIG_BAUDRATE         115200
 858 #define __USB_PHY_TYPE          utmi
 859
 860 #ifdef CONFIG_PPC_T1024
 861 #define CONFIG_BOARDNAME t1024rdb
 862 #define BANK_INTLV cs0_cs1
 863 #else
 864 #define CONFIG_BOARDNAME t1023rdb
 865 #define BANK_INTLV  null
 866 #endif
 867
 868 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 869         "hwconfig=fsl_ddr:ctlr_intlv=cacheline,"                \
 870         "bank_intlv=" __stringify(BANK_INTLV) "\0"              \
 871         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"  \
 872         "ramdiskfile=" __stringify(CONFIG_BOARDNAME) "/ramdisk.uboot\0" \
 873         "fdtfile=" __stringify(CONFIG_BOARDNAME) "/"            \
 874         __stringify(CONFIG_BOARDNAME) ".dtb\0"                  \
 875         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 876         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 877         "bootargs=root=/dev/ram rw console=ttyS0,115200\0" \
 878         "netdev=eth0\0"                                         \
 879         "tftpflash=tftpboot $loadaddr $uboot && "               \
 880         "protect off $ubootaddr +$filesize && "                 \
 881         "erase $ubootaddr +$filesize && "                       \
 882         "cp.b $loadaddr $ubootaddr $filesize && "               \
 883         "protect on $ubootaddr +$filesize && "                  \
 884         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 885         "consoledev=ttyS0\0"                                    \
 886         "ramdiskaddr=2000000\0"                                 \
 887         "fdtaddr=1e00000\0"                                     \
 888         "bdev=sda3\0"
 889
 890 #define CONFIG_LINUX                                    \
 891         "setenv bootargs root=/dev/ram rw "             \
 892         "console=$consoledev,$baudrate $othbootargs;"   \
 893         "setenv ramdiskaddr 0x02000000;"                \
 894         "setenv fdtaddr 0x00c00000;"                    \
 895         "setenv loadaddr 0x1000000;"                    \
 896         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 897
 898 #define CONFIG_NFSBOOTCOMMAND                   \
 899         "setenv bootargs root=/dev/nfs rw "     \
 900         "nfsroot=$serverip:$rootpath "          \
 901         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 902         "console=$consoledev,$baudrate $othbootargs;"   \
 903         "tftp $loadaddr $bootfile;"             \
 904         "tftp $fdtaddr $fdtfile;"               \
 905         "bootm $loadaddr - $fdtaddr"
 906
 907 #define CONFIG_BOOTCOMMAND      CONFIG_LINUX
 908
 909 /* Hash command with SHA acceleration supported in hardware */
 910 #ifdef CONFIG_FSL_CAAM
 911 #define CONFIG_CMD_HASH
 912 #define CONFIG_SHA_HW_ACCEL
 913 #endif
 914
 915 #include <asm/fsl_secure_boot.h>
 916
 917 #endif  /* __T1024RDB_H */