include/configs/T1040QDS.h

   1 /*
   2  * Copyright 2013-2014 Freescale Semiconductor, Inc.
   3  *
   4  * See file CREDITS for list of people who contributed to this
   5  * project.
   6  *
   7  * This program is free software; you can redistribute it and/or
   8  * modify it under the terms of the GNU General Public License as
   9  * published by the Free Software Foundation; either version 2 of
  10  * the License, or (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  20  * MA 02111-1307 USA
  21  */
  22
  23 #ifndef __CONFIG_H
  24 #define __CONFIG_H
  25
  26 /*
  27  * T1040 QDS board configuration file
  28  */
  29 #define CONFIG_T1040QDS
  30 #define CONFIG_PHYS_64BIT
  31
  32 #ifdef CONFIG_RAMBOOT_PBL
  33 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  34 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  35 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t1040qds/t1040_pbi.cfg
  36 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t1040qds/t1040_rcw.cfg
  37 #endif
  38
  39 /* High Level Configuration Options */
  40 #define CONFIG_BOOKE
  41 #define CONFIG_E500                     /* BOOKE e500 family */
  42 #define CONFIG_E500MC                   /* BOOKE e500mc family */
  43 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  44 #define CONFIG_MP                       /* support multiple processors */
  45
  46 /* support deep sleep */
  47 #define CONFIG_DEEP_SLEEP
  48 #define CONFIG_SILENT_CONSOLE
  49
  50 #ifndef CONFIG_SYS_TEXT_BASE
  51 #define CONFIG_SYS_TEXT_BASE    0xeff40000
  52 #endif
  53
  54 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  55 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  56 #endif
  57
  58 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  59 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
  60 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
  61 #define CONFIG_PCI                      /* Enable PCI/PCIE */
  62 #define CONFIG_PCI_INDIRECT_BRIDGE
  63 #define CONFIG_PCIE1                    /* PCIE controler 1 */
  64 #define CONFIG_PCIE2                    /* PCIE controler 2 */
  65 #define CONFIG_PCIE3                    /* PCIE controler 3 */
  66 #define CONFIG_PCIE4                    /* PCIE controler 4 */
  67
  68 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  69 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  70
  71 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  72
  73 #define CONFIG_ENV_OVERWRITE
  74
  75 #ifdef CONFIG_SYS_NO_FLASH
  76 #define CONFIG_ENV_IS_NOWHERE
  77 #else
  78 #define CONFIG_FLASH_CFI_DRIVER
  79 #define CONFIG_SYS_FLASH_CFI
  80 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
  81 #endif
  82
  83 #ifndef CONFIG_SYS_NO_FLASH
  84 #if defined(CONFIG_SPIFLASH)
  85 #define CONFIG_SYS_EXTRA_ENV_RELOC
  86 #define CONFIG_ENV_IS_IN_SPI_FLASH
  87 #define CONFIG_ENV_SPI_BUS              0
  88 #define CONFIG_ENV_SPI_CS               0
  89 #define CONFIG_ENV_SPI_MAX_HZ           10000000
  90 #define CONFIG_ENV_SPI_MODE             0
  91 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
  92 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
  93 #define CONFIG_ENV_SECT_SIZE            0x10000
  94 #elif defined(CONFIG_SDCARD)
  95 #define CONFIG_SYS_EXTRA_ENV_RELOC
  96 #define CONFIG_ENV_IS_IN_MMC
  97 #define CONFIG_SYS_MMC_ENV_DEV          0
  98 #define CONFIG_ENV_SIZE                 0x2000
  99 #define CONFIG_ENV_OFFSET               (512 * 1658)
 100 #elif defined(CONFIG_NAND)
 101 #define CONFIG_SYS_EXTRA_ENV_RELOC
 102 #define CONFIG_ENV_IS_IN_NAND
 103 #define CONFIG_ENV_SIZE                 CONFIG_SYS_NAND_BLOCK_SIZE
 104 #define CONFIG_ENV_OFFSET               (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
 105 #else
 106 #define CONFIG_ENV_IS_IN_FLASH
 107 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 108 #define CONFIG_ENV_SIZE         0x2000
 109 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 110 #endif
 111 #else /* CONFIG_SYS_NO_FLASH */
 112 #define CONFIG_ENV_SIZE                0x2000
 113 #define CONFIG_ENV_SECT_SIZE   0x20000 /* 128K (one sector) */
 114 #endif
 115
 116 #ifndef __ASSEMBLY__
 117 unsigned long get_board_sys_clk(void);
 118 unsigned long get_board_ddr_clk(void);
 119 #endif
 120
 121 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk() /* sysclk for MPC85xx */
 122 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk()
 123
 124 /*
 125  * These can be toggled for performance analysis, otherwise use default.
 126  */
 127 #define CONFIG_SYS_CACHE_STASHING
 128 #define CONFIG_BACKSIDE_L2_CACHE
 129 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
 130 #define CONFIG_BTB                      /* toggle branch predition */
 131 #define CONFIG_DDR_ECC
 132 #ifdef CONFIG_DDR_ECC
 133 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 134 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 135 #endif
 136
 137 #define CONFIG_ENABLE_36BIT_PHYS
 138
 139 #define CONFIG_ADDR_MAP
 140 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 141
 142 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 143 #define CONFIG_SYS_MEMTEST_END          0x00400000
 144 #define CONFIG_SYS_ALT_MEMTEST
 145 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 146
 147 /*
 148  *  Config the L3 Cache as L3 SRAM
 149  */
 150 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 151
 152 #define CONFIG_SYS_DCSRBAR              0xf0000000
 153 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 154
 155 /* EEPROM */
 156 #define CONFIG_ID_EEPROM
 157 #define CONFIG_SYS_I2C_EEPROM_NXID
 158 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 159 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 160 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 161 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 162 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 163
 164 /*
 165  * DDR Setup
 166  */
 167 #define CONFIG_VERY_BIG_RAM
 168 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 169 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 170
 171 /* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */
 172 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 173 #define CONFIG_CHIP_SELECTS_PER_CTRL    (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
 174
 175 #define CONFIG_DDR_SPD
 176 #ifndef CONFIG_SYS_FSL_DDR4
 177 #define CONFIG_SYS_FSL_DDR3
 178 #define CONFIG_FSL_DDR_INTERACTIVE
 179 #endif
 180
 181 #define CONFIG_SYS_SPD_BUS_NUM  0
 182 #define SPD_EEPROM_ADDRESS      0x51
 183
 184 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 185
 186 /*
 187  * IFC Definitions
 188  */
 189 #define CONFIG_SYS_FLASH_BASE   0xe0000000
 190 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 191
 192 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 193 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 194                                 + 0x8000000) | \
 195                                 CSPR_PORT_SIZE_16 | \
 196                                 CSPR_MSEL_NOR | \
 197                                 CSPR_V)
 198 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 199 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 200                                 CSPR_PORT_SIZE_16 | \
 201                                 CSPR_MSEL_NOR | \
 202                                 CSPR_V)
 203 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 204 /* NOR Flash Timing Params */
 205 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 206 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 207                                 FTIM0_NOR_TEADC(0x5) | \
 208                                 FTIM0_NOR_TEAHC(0x5))
 209 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 210                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 211                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 212 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 213                                 FTIM2_NOR_TCH(0x4) | \
 214                                 FTIM2_NOR_TWPH(0x0E) | \
 215                                 FTIM2_NOR_TWP(0x1c))
 216 #define CONFIG_SYS_NOR_FTIM3    0x0
 217
 218 #define CONFIG_SYS_FLASH_QUIET_TEST
 219 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 220
 221 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 222 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 223 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 224 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 225
 226 #define CONFIG_SYS_FLASH_EMPTY_INFO
 227 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 228                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 229 #define CONFIG_FSL_QIXIS        /* use common QIXIS code */
 230 #define QIXIS_BASE              0xffdf0000
 231 #define QIXIS_BASE_PHYS         (0xf00000000ull | QIXIS_BASE)
 232 #define QIXIS_LBMAP_SWITCH              0x06
 233 #define QIXIS_LBMAP_MASK                0x0f
 234 #define QIXIS_LBMAP_SHIFT               0
 235 #define QIXIS_LBMAP_DFLTBANK            0x00
 236 #define QIXIS_LBMAP_ALTBANK             0x04
 237 #define QIXIS_RST_CTL_RESET             0x31
 238 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 239 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 240 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 241 #define QIXIS_RST_FORCE_MEM             0x01
 242
 243 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 244 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
 245                                 | CSPR_PORT_SIZE_8 \
 246                                 | CSPR_MSEL_GPCM \
 247                                 | CSPR_V)
 248 #define CONFIG_SYS_AMASK3       IFC_AMASK(4*1024)
 249 #define CONFIG_SYS_CSOR3        0x0
 250 /* QIXIS Timing parameters for IFC CS3 */
 251 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 252                                         FTIM0_GPCM_TEADC(0x0e) | \
 253                                         FTIM0_GPCM_TEAHC(0x0e))
 254 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0xff) | \
 255                                         FTIM1_GPCM_TRAD(0x3f))
 256 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 257                                         FTIM2_GPCM_TCH(0x8) | \
 258                                         FTIM2_GPCM_TWP(0x1f))
 259 #define CONFIG_SYS_CS3_FTIM3            0x0
 260
 261 #define CONFIG_NAND_FSL_IFC
 262 #define CONFIG_SYS_NAND_BASE            0xff800000
 263 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 264
 265 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 266 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 267                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 268                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 269                                 | CSPR_V)
 270 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 271
 272 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 273                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 274                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 275                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 276                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 277                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
 278                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 279
 280 #define CONFIG_SYS_NAND_ONFI_DETECTION
 281
 282 /* ONFI NAND Flash mode0 Timing Params */
 283 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 284                                         FTIM0_NAND_TWP(0x18)   | \
 285                                         FTIM0_NAND_TWCHT(0x07) | \
 286                                         FTIM0_NAND_TWH(0x0a))
 287 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 288                                         FTIM1_NAND_TWBE(0x39)  | \
 289                                         FTIM1_NAND_TRR(0x0e)   | \
 290                                         FTIM1_NAND_TRP(0x18))
 291 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 292                                         FTIM2_NAND_TREH(0x0a) | \
 293                                         FTIM2_NAND_TWHRE(0x1e))
 294 #define CONFIG_SYS_NAND_FTIM3           0x0
 295
 296 #define CONFIG_SYS_NAND_DDR_LAW         11
 297 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 298 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 299 #define CONFIG_MTD_NAND_VERIFY_WRITE
 300 #define CONFIG_CMD_NAND
 301
 302 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 303
 304 #if defined(CONFIG_NAND)
 305 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 306 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 307 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 308 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 309 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 310 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 311 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 312 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 313 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 314 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR0_CSPR
 315 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 316 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 317 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 318 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 319 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 320 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 321 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 322 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR1_CSPR
 323 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 324 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 325 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 326 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 327 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 328 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 329 #else
 330 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 331 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 332 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 333 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 334 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 335 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 336 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 337 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 338 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 339 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR
 340 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 341 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 342 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 343 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 344 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 345 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 346 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 347 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 348 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 349 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 350 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 351 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 352 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 353 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 354 #endif
 355
 356 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 357
 358 #if defined(CONFIG_RAMBOOT_PBL)
 359 #define CONFIG_SYS_RAMBOOT
 360 #endif
 361
 362 #define CONFIG_BOARD_EARLY_INIT_R
 363 #define CONFIG_MISC_INIT_R
 364
 365 #define CONFIG_HWCONFIG
 366
 367 /* define to use L1 as initial stack */
 368 #define CONFIG_L1_INIT_RAM
 369 #define CONFIG_SYS_INIT_RAM_LOCK
 370 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 371 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 372 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe0ec000
 373 /* The assembler doesn't like typecast */
 374 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 375         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 376           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 377 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 378
 379 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 380                                         GENERATED_GBL_DATA_SIZE)
 381 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 382
 383 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 384 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
 385
 386 /* Serial Port - controlled on board with jumper J8
 387  * open - index 2
 388  * shorted - index 1
 389  */
 390 #define CONFIG_CONS_INDEX       1
 391 #define CONFIG_SYS_NS16550
 392 #define CONFIG_SYS_NS16550_SERIAL
 393 #define CONFIG_SYS_NS16550_REG_SIZE     1
 394 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 395
 396 #define CONFIG_SYS_BAUDRATE_TABLE       \
 397         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 398
 399 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 400 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 401 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 402 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 403 #define CONFIG_SERIAL_MULTI             /* Enable both serial ports */
 404 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    /* determine from environment */
 405
 406 /* Use the HUSH parser */
 407 #define CONFIG_SYS_HUSH_PARSER
 408 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 409
 410 /* Video */
 411 #define CONFIG_FSL_DIU_FB
 412 #ifdef CONFIG_FSL_DIU_FB
 413 #define CONFIG_SYS_DIU_ADDR     (CONFIG_SYS_CCSRBAR + 0x180000)
 414 #define CONFIG_VIDEO
 415 #define CONFIG_CMD_BMP
 416 #define CONFIG_CFB_CONSOLE
 417 #define CONFIG_VIDEO_SW_CURSOR
 418 #define CONFIG_VGA_AS_SINGLE_DEVICE
 419 #define CONFIG_VIDEO_LOGO
 420 #define CONFIG_VIDEO_BMP_LOGO
 421 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
 422 /*
 423  * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so
 424  * disable empty flash sector detection, which is I/O-intensive.
 425  */
 426 #undef CONFIG_SYS_FLASH_EMPTY_INFO
 427 #endif
 428
 429 /* pass open firmware flat tree */
 430 #define CONFIG_OF_LIBFDT
 431 #define CONFIG_OF_BOARD_SETUP
 432 #define CONFIG_OF_STDOUT_VIA_ALIAS
 433
 434 /* new uImage format support */
 435 #define CONFIG_FIT
 436 #define CONFIG_FIT_VERBOSE      /* enable fit_format_{error,warning}() */
 437
 438 /* I2C */
 439 #define CONFIG_SYS_I2C
 440 #define CONFIG_SYS_I2C_FSL              /* Use FSL common I2C driver */
 441 #define CONFIG_SYS_FSL_I2C_SPEED        50000   /* I2C speed in Hz */
 442 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 443 #define CONFIG_SYS_FSL_I2C2_SPEED       50000   /* I2C speed in Hz */
 444 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 445 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 446 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x119000
 447
 448 #define I2C_MUX_PCA_ADDR                0x77
 449 #define I2C_MUX_PCA_ADDR_PRI            0x77 /* Primary Mux*/
 450
 451
 452 /* I2C bus multiplexer */
 453 #define I2C_MUX_CH_DEFAULT      0x8
 454 #define I2C_MUX_CH_DIU          0xC
 455
 456 /* LDI/DVI Encoder for display */
 457 #define CONFIG_SYS_I2C_LDI_ADDR         0x38
 458 #define CONFIG_SYS_I2C_DVI_ADDR         0x75
 459
 460 /*
 461  * RTC configuration
 462  */
 463 #define RTC
 464 #define CONFIG_RTC_DS3231               1
 465 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 466
 467 /*
 468  * eSPI - Enhanced SPI
 469  */
 470 #define CONFIG_FSL_ESPI
 471 #define CONFIG_SPI_FLASH
 472 #define CONFIG_SPI_FLASH_STMICRO
 473 #define CONFIG_SPI_FLASH_SST
 474 #define CONFIG_SPI_FLASH_EON
 475 #define CONFIG_CMD_SF
 476 #define CONFIG_SF_DEFAULT_SPEED         10000000
 477 #define CONFIG_SF_DEFAULT_MODE          0
 478
 479 /*
 480  * General PCI
 481  * Memory space is mapped 1-1, but I/O space must start from 0.
 482  */
 483
 484 #ifdef CONFIG_PCI
 485 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 486 #ifdef CONFIG_PCIE1
 487 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 488 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 489 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 490 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000      /* 256M */
 491 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 492 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 493 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 494 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 495 #endif
 496
 497 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 498 #ifdef CONFIG_PCIE2
 499 #define CONFIG_SYS_PCIE2_MEM_VIRT       0x90000000
 500 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 501 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc10000000ull
 502 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000      /* 256M */
 503 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 504 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 505 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 506 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 507 #endif
 508
 509 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 510 #ifdef CONFIG_PCIE3
 511 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xa0000000
 512 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 513 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc20000000ull
 514 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x10000000      /* 256M */
 515 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 516 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 517 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 518 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 519 #endif
 520
 521 /* controller 4, Base address 203000 */
 522 #ifdef CONFIG_PCIE4
 523 #define CONFIG_SYS_PCIE4_MEM_VIRT       0xb0000000
 524 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 525 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc30000000ull
 526 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x10000000      /* 256M */
 527 #define CONFIG_SYS_PCIE4_IO_VIRT        0xf8030000
 528 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 529 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 530 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 531 #endif
 532
 533 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 534 #define CONFIG_E1000
 535
 536 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 537 #define CONFIG_DOS_PARTITION
 538 #endif  /* CONFIG_PCI */
 539
 540 /* SATA */
 541 #define CONFIG_FSL_SATA_V2
 542 #ifdef CONFIG_FSL_SATA_V2
 543 #define CONFIG_LIBATA
 544 #define CONFIG_FSL_SATA
 545
 546 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 547 #define CONFIG_SATA1
 548 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 549 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 550 #define CONFIG_SATA2
 551 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 552 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 553
 554 #define CONFIG_LBA48
 555 #define CONFIG_CMD_SATA
 556 #define CONFIG_DOS_PARTITION
 557 #define CONFIG_CMD_EXT2
 558 #endif
 559
 560 /*
 561 * USB
 562 */
 563 #define CONFIG_HAS_FSL_DR_USB
 564
 565 #ifdef CONFIG_HAS_FSL_DR_USB
 566 #define CONFIG_USB_EHCI
 567
 568 #ifdef CONFIG_USB_EHCI
 569 #define CONFIG_CMD_USB
 570 #define CONFIG_USB_STORAGE
 571 #define CONFIG_USB_EHCI_FSL
 572 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 573 #define CONFIG_CMD_EXT2
 574 #endif
 575 #endif
 576
 577 #define CONFIG_MMC
 578
 579 #ifdef CONFIG_MMC
 580 #define CONFIG_FSL_ESDHC
 581 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 582 #define CONFIG_CMD_MMC
 583 #define CONFIG_GENERIC_MMC
 584 #define CONFIG_CMD_EXT2
 585 #define CONFIG_CMD_FAT
 586 #define CONFIG_DOS_PARTITION
 587 #endif
 588
 589 /* Qman/Bman */
 590 #ifndef CONFIG_NOBQFMAN
 591 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 592 #define CONFIG_SYS_BMAN_NUM_PORTALS     25
 593 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 594 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 595 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 596 #define CONFIG_SYS_QMAN_NUM_PORTALS     25
 597 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 598 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 599 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 600
 601 #define CONFIG_SYS_DPAA_FMAN
 602 #define CONFIG_SYS_DPAA_PME
 603
 604 #define CONFIG_QE
 605 #define CONFIG_U_QE
 606 /* Default address of microcode for the Linux Fman driver */
 607 #if defined(CONFIG_SPIFLASH)
 608 /*
 609  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 610  * env, so we got 0x110000.
 611  */
 612 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 613 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 614 #elif defined(CONFIG_SDCARD)
 615 /*
 616  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 617  * about 825KB (1650 blocks), Env is stored after the image, and the env size is
 618  * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
 619  */
 620 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 621 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680)
 622 #elif defined(CONFIG_NAND)
 623 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 624 #define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE)
 625 #else
 626 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 627 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 628 #define CONFIG_SYS_QE_FW_ADDR           0xEFF10000
 629 #endif
 630 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 631 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 632 #endif /* CONFIG_NOBQFMAN */
 633
 634 #ifdef CONFIG_SYS_DPAA_FMAN
 635 #define CONFIG_FMAN_ENET
 636 #define CONFIG_PHYLIB_10G
 637 #define CONFIG_PHY_VITESSE
 638 #define CONFIG_PHY_REALTEK
 639 #define CONFIG_PHY_TERANETICS
 640 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
 641 #define SGMII_CARD_PORT2_PHY_ADDR 0x10
 642 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
 643 #define SGMII_CARD_PORT4_PHY_ADDR 0x11
 644 #endif
 645
 646 #ifdef CONFIG_FMAN_ENET
 647 #define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR  0x01
 648 #define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR  0x02
 649
 650 #define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR    0x1c
 651 #define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR    0x1d
 652 #define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR    0x1e
 653 #define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR    0x1f
 654
 655 #define CONFIG_MII              /* MII PHY management */
 656 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 657 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 658 #endif
 659
 660 /*
 661  * Dynamic MTD Partition support with mtdparts
 662  */
 663 #ifndef CONFIG_SYS_NO_FLASH
 664 #define CONFIG_MTD_DEVICE
 665 #define CONFIG_MTD_PARTITIONS
 666 #define CONFIG_CMD_MTDPARTS
 667 #define CONFIG_FLASH_CFI_MTD
 668 #define MTDIDS_DEFAULT "nor0=fe8000000.nor,nand0=fff800000.flash," \
 669                         "spi0=spife110000.0"
 670 #define MTDPARTS_DEFAULT        "mtdparts=fe8000000.nor:1m(uboot),5m(kernel)," \
 671                                 "128k(dtb),96m(fs),-(user);"\
 672                                 "fff800000.flash:2m(uboot),9m(kernel),"\
 673                                 "128k(dtb),96m(fs),-(user);spife110000.0:" \
 674                                 "2m(uboot),9m(kernel),128k(dtb),-(user)"
 675 #endif
 676
 677 /*
 678  * Environment
 679  */
 680 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 681 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 682
 683 /*
 684  * Command line configuration.
 685  */
 686 #include <config_cmd_default.h>
 687
 688 #define CONFIG_CMD_DATE
 689 #define CONFIG_CMD_DHCP
 690 #define CONFIG_CMD_EEPROM
 691 #define CONFIG_CMD_ELF
 692 #define CONFIG_CMD_ERRATA
 693 #define CONFIG_CMD_GREPENV
 694 #define CONFIG_CMD_IRQ
 695 #define CONFIG_CMD_I2C
 696 #define CONFIG_CMD_MII
 697 #define CONFIG_CMD_PING
 698 #define CONFIG_CMD_REGINFO
 699 #define CONFIG_CMD_SETEXPR
 700
 701 #ifdef CONFIG_PCI
 702 #define CONFIG_CMD_PCI
 703 #define CONFIG_CMD_NET
 704 #endif
 705
 706 /*
 707  * Miscellaneous configurable options
 708  */
 709 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 710 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 711 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 712 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 713 #define CONFIG_SYS_PROMPT       "=> "           /* Monitor Command Prompt */
 714 #ifdef CONFIG_CMD_KGDB
 715 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 716 #else
 717 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 718 #endif
 719 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 720 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 721 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 722
 723 /*
 724  * For booting Linux, the board info and command line data
 725  * have to be in the first 64 MB of memory, since this is
 726  * the maximum mapped by the Linux kernel during initialization.
 727  */
 728 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 729 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 730
 731 #ifdef CONFIG_CMD_KGDB
 732 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 733 #endif
 734
 735 /*
 736  * Environment Configuration
 737  */
 738 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 739 #define CONFIG_BOOTFILE         "uImage"
 740 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 741
 742 /* default location for tftp and bootm */
 743 #define CONFIG_LOADADDR         1000000
 744
 745 #define CONFIG_BOOTDELAY        10      /* -1 disables auto-boot */
 746
 747 #define CONFIG_BAUDRATE 115200
 748
 749 #define __USB_PHY_TYPE  utmi
 750
 751 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 752         "hwconfig=fsl_ddr:ctlr_intlv=cacheline,"                \
 753         "bank_intlv=cs0_cs1;"                                   \
 754         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 755         "netdev=eth0\0"                                         \
 756         "video-mode=fslfb:1024x768-32@60,monitor=dvi\0"         \
 757         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 758         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 759         "tftpflash=tftpboot $loadaddr $uboot && "               \
 760         "protect off $ubootaddr +$filesize && "                 \
 761         "erase $ubootaddr +$filesize && "                       \
 762         "cp.b $loadaddr $ubootaddr $filesize && "               \
 763         "protect on $ubootaddr +$filesize && "                  \
 764         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 765         "consoledev=ttyS0\0"                                    \
 766         "ramdiskaddr=2000000\0"                                 \
 767         "ramdiskfile=t1040qds/ramdisk.uboot\0"                  \
 768         "fdtaddr=c00000\0"                                      \
 769         "fdtfile=t1040qds/t1040qds.dtb\0"                       \
 770         "bdev=sda3\0"                                           \
 771         "c=ffe\0"
 772
 773 #define CONFIG_LINUX                       \
 774         "setenv bootargs root=/dev/ram rw "            \
 775         "console=$consoledev,$baudrate $othbootargs;"  \
 776         "setenv ramdiskaddr 0x02000000;"               \
 777         "setenv fdtaddr 0x00c00000;"                   \
 778         "setenv loadaddr 0x1000000;"                   \
 779         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 780
 781 #define CONFIG_HDBOOT                                   \
 782         "setenv bootargs root=/dev/$bdev rw "           \
 783         "console=$consoledev,$baudrate $othbootargs;"   \
 784         "tftp $loadaddr $bootfile;"                     \
 785         "tftp $fdtaddr $fdtfile;"                       \
 786         "bootm $loadaddr - $fdtaddr"
 787
 788 #define CONFIG_NFSBOOTCOMMAND                   \
 789         "setenv bootargs root=/dev/nfs rw "     \
 790         "nfsroot=$serverip:$rootpath "          \
 791         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 792         "console=$consoledev,$baudrate $othbootargs;"   \
 793         "tftp $loadaddr $bootfile;"             \
 794         "tftp $fdtaddr $fdtfile;"               \
 795         "bootm $loadaddr - $fdtaddr"
 796
 797 #define CONFIG_RAMBOOTCOMMAND                           \
 798         "setenv bootargs root=/dev/ram rw "             \
 799         "console=$consoledev,$baudrate $othbootargs;"   \
 800         "tftp $ramdiskaddr $ramdiskfile;"               \
 801         "tftp $loadaddr $bootfile;"                     \
 802         "tftp $fdtaddr $fdtfile;"                       \
 803         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 804
 805 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 806
 807 #ifdef CONFIG_SECURE_BOOT
 808 #include <asm/fsl_secure_boot.h>
 809 #endif
 810
 811 #endif  /* __CONFIG_H */