include/configs/T1040QDS.h

   1 /*
   2  * Copyright 2013-2014 Freescale Semiconductor, Inc.
   3  *
   4  * See file CREDITS for list of people who contributed to this
   5  * project.
   6  *
   7  * This program is free software; you can redistribute it and/or
   8  * modify it under the terms of the GNU General Public License as
   9  * published by the Free Software Foundation; either version 2 of
  10  * the License, or (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  20  * MA 02111-1307 USA
  21  */
  22
  23 #ifndef __CONFIG_H
  24 #define __CONFIG_H
  25
  26 /*
  27  * T1040 QDS board configuration file
  28  */
  29 #define CONFIG_T1040QDS
  30
  31 #ifdef CONFIG_RAMBOOT_PBL
  32 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  33 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  34 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t1040qds/t1040_pbi.cfg
  35 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t1040qds/t1040_rcw.cfg
  36 #endif
  37
  38 /* High Level Configuration Options */
  39 #define CONFIG_BOOKE
  40 #define CONFIG_E500                     /* BOOKE e500 family */
  41 #define CONFIG_E500MC                   /* BOOKE e500mc family */
  42 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  43 #define CONFIG_MP                       /* support multiple processors */
  44
  45 /* support deep sleep */
  46 #define CONFIG_DEEP_SLEEP
  47 #if defined(CONFIG_DEEP_SLEEP)
  48 #define CONFIG_SILENT_CONSOLE
  49 #define CONFIG_BOARD_EARLY_INIT_F
  50 #endif
  51
  52 #ifndef CONFIG_SYS_TEXT_BASE
  53 #define CONFIG_SYS_TEXT_BASE    0xeff40000
  54 #endif
  55
  56 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  57 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  58 #endif
  59
  60 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  61 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
  62 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
  63 #define CONFIG_FSL_CAAM                 /* Enable SEC/CAAM */
  64 #define CONFIG_PCI                      /* Enable PCI/PCIE */
  65 #define CONFIG_PCI_INDIRECT_BRIDGE
  66 #define CONFIG_PCIE1                    /* PCIE controller 1 */
  67 #define CONFIG_PCIE2                    /* PCIE controller 2 */
  68 #define CONFIG_PCIE3                    /* PCIE controller 3 */
  69 #define CONFIG_PCIE4                    /* PCIE controller 4 */
  70
  71 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  72 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  73
  74 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  75
  76 #define CONFIG_ENV_OVERWRITE
  77
  78 #ifdef CONFIG_SYS_NO_FLASH
  79 #define CONFIG_ENV_IS_NOWHERE
  80 #else
  81 #define CONFIG_FLASH_CFI_DRIVER
  82 #define CONFIG_SYS_FLASH_CFI
  83 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
  84 #endif
  85
  86 #ifndef CONFIG_SYS_NO_FLASH
  87 #if defined(CONFIG_SPIFLASH)
  88 #define CONFIG_SYS_EXTRA_ENV_RELOC
  89 #define CONFIG_ENV_IS_IN_SPI_FLASH
  90 #define CONFIG_ENV_SPI_BUS              0
  91 #define CONFIG_ENV_SPI_CS               0
  92 #define CONFIG_ENV_SPI_MAX_HZ           10000000
  93 #define CONFIG_ENV_SPI_MODE             0
  94 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
  95 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
  96 #define CONFIG_ENV_SECT_SIZE            0x10000
  97 #elif defined(CONFIG_SDCARD)
  98 #define CONFIG_SYS_EXTRA_ENV_RELOC
  99 #define CONFIG_ENV_IS_IN_MMC
 100 #define CONFIG_SYS_MMC_ENV_DEV          0
 101 #define CONFIG_ENV_SIZE                 0x2000
 102 #define CONFIG_ENV_OFFSET               (512 * 1658)
 103 #elif defined(CONFIG_NAND)
 104 #define CONFIG_SYS_EXTRA_ENV_RELOC
 105 #define CONFIG_ENV_IS_IN_NAND
 106 #define CONFIG_ENV_SIZE                 CONFIG_SYS_NAND_BLOCK_SIZE
 107 #define CONFIG_ENV_OFFSET               (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
 108 #else
 109 #define CONFIG_ENV_IS_IN_FLASH
 110 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 111 #define CONFIG_ENV_SIZE         0x2000
 112 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 113 #endif
 114 #else /* CONFIG_SYS_NO_FLASH */
 115 #define CONFIG_ENV_SIZE                0x2000
 116 #define CONFIG_ENV_SECT_SIZE   0x20000 /* 128K (one sector) */
 117 #endif
 118
 119 #ifndef __ASSEMBLY__
 120 unsigned long get_board_sys_clk(void);
 121 unsigned long get_board_ddr_clk(void);
 122 #endif
 123
 124 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk() /* sysclk for MPC85xx */
 125 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk()
 126
 127 /*
 128  * These can be toggled for performance analysis, otherwise use default.
 129  */
 130 #define CONFIG_SYS_CACHE_STASHING
 131 #define CONFIG_BACKSIDE_L2_CACHE
 132 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
 133 #define CONFIG_BTB                      /* toggle branch predition */
 134 #define CONFIG_DDR_ECC
 135 #ifdef CONFIG_DDR_ECC
 136 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 137 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 138 #endif
 139
 140 #define CONFIG_ENABLE_36BIT_PHYS
 141
 142 #define CONFIG_ADDR_MAP
 143 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 144
 145 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 146 #define CONFIG_SYS_MEMTEST_END          0x00400000
 147 #define CONFIG_SYS_ALT_MEMTEST
 148 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 149
 150 /*
 151  *  Config the L3 Cache as L3 SRAM
 152  */
 153 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 154
 155 #define CONFIG_SYS_DCSRBAR              0xf0000000
 156 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 157
 158 /* EEPROM */
 159 #define CONFIG_ID_EEPROM
 160 #define CONFIG_SYS_I2C_EEPROM_NXID
 161 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 162 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 163 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 164 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 165 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 166
 167 /*
 168  * DDR Setup
 169  */
 170 #define CONFIG_VERY_BIG_RAM
 171 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 172 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 173
 174 /* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */
 175 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 176 #define CONFIG_CHIP_SELECTS_PER_CTRL    (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
 177
 178 #define CONFIG_DDR_SPD
 179 #ifndef CONFIG_SYS_FSL_DDR4
 180 #define CONFIG_SYS_FSL_DDR3
 181 #endif
 182 #define CONFIG_FSL_DDR_INTERACTIVE
 183
 184 #define CONFIG_SYS_SPD_BUS_NUM  0
 185 #define SPD_EEPROM_ADDRESS      0x51
 186
 187 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 188
 189 /*
 190  * IFC Definitions
 191  */
 192 #define CONFIG_SYS_FLASH_BASE   0xe0000000
 193 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 194
 195 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 196 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 197                                 + 0x8000000) | \
 198                                 CSPR_PORT_SIZE_16 | \
 199                                 CSPR_MSEL_NOR | \
 200                                 CSPR_V)
 201 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 202 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 203                                 CSPR_PORT_SIZE_16 | \
 204                                 CSPR_MSEL_NOR | \
 205                                 CSPR_V)
 206 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 207
 208 /*
 209  * TDM Definition
 210  */
 211 #define T1040_TDM_QUIRK_CCSR_BASE       0xfe000000
 212
 213 /* NOR Flash Timing Params */
 214 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 215 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 216                                 FTIM0_NOR_TEADC(0x5) | \
 217                                 FTIM0_NOR_TEAHC(0x5))
 218 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 219                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 220                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 221 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 222                                 FTIM2_NOR_TCH(0x4) | \
 223                                 FTIM2_NOR_TWPH(0x0E) | \
 224                                 FTIM2_NOR_TWP(0x1c))
 225 #define CONFIG_SYS_NOR_FTIM3    0x0
 226
 227 #define CONFIG_SYS_FLASH_QUIET_TEST
 228 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 229
 230 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 231 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 232 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 233 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 234
 235 #define CONFIG_SYS_FLASH_EMPTY_INFO
 236 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 237                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 238 #define CONFIG_FSL_QIXIS        /* use common QIXIS code */
 239 #define QIXIS_BASE              0xffdf0000
 240 #define QIXIS_BASE_PHYS         (0xf00000000ull | QIXIS_BASE)
 241 #define QIXIS_LBMAP_SWITCH              0x06
 242 #define QIXIS_LBMAP_MASK                0x0f
 243 #define QIXIS_LBMAP_SHIFT               0
 244 #define QIXIS_LBMAP_DFLTBANK            0x00
 245 #define QIXIS_LBMAP_ALTBANK             0x04
 246 #define QIXIS_RST_CTL_RESET             0x31
 247 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 248 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 249 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 250 #define QIXIS_RST_FORCE_MEM             0x01
 251
 252 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 253 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
 254                                 | CSPR_PORT_SIZE_8 \
 255                                 | CSPR_MSEL_GPCM \
 256                                 | CSPR_V)
 257 #define CONFIG_SYS_AMASK3       IFC_AMASK(4*1024)
 258 #define CONFIG_SYS_CSOR3        0x0
 259 /* QIXIS Timing parameters for IFC CS3 */
 260 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 261                                         FTIM0_GPCM_TEADC(0x0e) | \
 262                                         FTIM0_GPCM_TEAHC(0x0e))
 263 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0xff) | \
 264                                         FTIM1_GPCM_TRAD(0x3f))
 265 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 266                                         FTIM2_GPCM_TCH(0x8) | \
 267                                         FTIM2_GPCM_TWP(0x1f))
 268 #define CONFIG_SYS_CS3_FTIM3            0x0
 269
 270 #define CONFIG_NAND_FSL_IFC
 271 #define CONFIG_SYS_NAND_BASE            0xff800000
 272 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 273
 274 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 275 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 276                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 277                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 278                                 | CSPR_V)
 279 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 280
 281 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 282                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 283                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 284                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 285                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 286                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
 287                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 288
 289 #define CONFIG_SYS_NAND_ONFI_DETECTION
 290
 291 /* ONFI NAND Flash mode0 Timing Params */
 292 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 293                                         FTIM0_NAND_TWP(0x18)   | \
 294                                         FTIM0_NAND_TWCHT(0x07) | \
 295                                         FTIM0_NAND_TWH(0x0a))
 296 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 297                                         FTIM1_NAND_TWBE(0x39)  | \
 298                                         FTIM1_NAND_TRR(0x0e)   | \
 299                                         FTIM1_NAND_TRP(0x18))
 300 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 301                                         FTIM2_NAND_TREH(0x0a) | \
 302                                         FTIM2_NAND_TWHRE(0x1e))
 303 #define CONFIG_SYS_NAND_FTIM3           0x0
 304
 305 #define CONFIG_SYS_NAND_DDR_LAW         11
 306 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 307 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 308 #define CONFIG_CMD_NAND
 309
 310 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 311
 312 #if defined(CONFIG_NAND)
 313 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 314 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 315 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 316 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 317 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 318 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 319 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 320 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 321 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 322 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR0_CSPR
 323 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 324 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 325 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 326 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 327 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 328 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 329 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 330 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR1_CSPR
 331 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 332 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 333 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 334 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 335 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 336 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 337 #else
 338 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 339 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 340 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 341 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 342 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 343 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 344 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 345 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 346 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 347 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR
 348 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 349 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 350 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 351 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 352 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 353 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 354 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 355 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 356 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 357 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 358 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 359 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 360 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 361 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 362 #endif
 363
 364 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 365
 366 #if defined(CONFIG_RAMBOOT_PBL)
 367 #define CONFIG_SYS_RAMBOOT
 368 #endif
 369
 370 #define CONFIG_BOARD_EARLY_INIT_R
 371 #define CONFIG_MISC_INIT_R
 372
 373 #define CONFIG_HWCONFIG
 374
 375 /* define to use L1 as initial stack */
 376 #define CONFIG_L1_INIT_RAM
 377 #define CONFIG_SYS_INIT_RAM_LOCK
 378 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 379 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 380 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 381 /* The assembler doesn't like typecast */
 382 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 383         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 384           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 385 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 386
 387 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 388                                         GENERATED_GBL_DATA_SIZE)
 389 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 390
 391 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 392 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
 393
 394 /* Serial Port - controlled on board with jumper J8
 395  * open - index 2
 396  * shorted - index 1
 397  */
 398 #define CONFIG_CONS_INDEX       1
 399 #define CONFIG_SYS_NS16550_SERIAL
 400 #define CONFIG_SYS_NS16550_REG_SIZE     1
 401 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 402
 403 #define CONFIG_SYS_BAUDRATE_TABLE       \
 404         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 405
 406 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 407 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 408 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 409 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 410 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    /* determine from environment */
 411
 412 /* Video */
 413 #define CONFIG_FSL_DIU_FB
 414 #ifdef CONFIG_FSL_DIU_FB
 415 #define CONFIG_FSL_DIU_CH7301
 416 #define CONFIG_SYS_DIU_ADDR     (CONFIG_SYS_CCSRBAR + 0x180000)
 417 #define CONFIG_VIDEO
 418 #define CONFIG_CMD_BMP
 419 #define CONFIG_CFB_CONSOLE
 420 #define CONFIG_VIDEO_SW_CURSOR
 421 #define CONFIG_VGA_AS_SINGLE_DEVICE
 422 #define CONFIG_VIDEO_LOGO
 423 #define CONFIG_VIDEO_BMP_LOGO
 424 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
 425 /*
 426  * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so
 427  * disable empty flash sector detection, which is I/O-intensive.
 428  */
 429 #undef CONFIG_SYS_FLASH_EMPTY_INFO
 430 #endif
 431
 432 /* I2C */
 433 #define CONFIG_SYS_I2C
 434 #define CONFIG_SYS_I2C_FSL              /* Use FSL common I2C driver */
 435 #define CONFIG_SYS_FSL_I2C_SPEED        50000   /* I2C speed in Hz */
 436 #define CONFIG_SYS_FSL_I2C2_SPEED       50000
 437 #define CONFIG_SYS_FSL_I2C3_SPEED       50000
 438 #define CONFIG_SYS_FSL_I2C4_SPEED       50000
 439 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 440 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 441 #define CONFIG_SYS_FSL_I2C3_SLAVE       0x7F
 442 #define CONFIG_SYS_FSL_I2C4_SLAVE       0x7F
 443 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 444 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 445 #define CONFIG_SYS_FSL_I2C3_OFFSET      0x119000
 446 #define CONFIG_SYS_FSL_I2C4_OFFSET      0x119100
 447
 448 #define I2C_MUX_PCA_ADDR                0x77
 449 #define I2C_MUX_PCA_ADDR_PRI            0x77 /* Primary Mux*/
 450
 451 /* I2C bus multiplexer */
 452 #define I2C_MUX_CH_DEFAULT      0x8
 453 #define I2C_MUX_CH_DIU          0xC
 454
 455 /* LDI/DVI Encoder for display */
 456 #define CONFIG_SYS_I2C_LDI_ADDR         0x38
 457 #define CONFIG_SYS_I2C_DVI_ADDR         0x75
 458
 459 /*
 460  * RTC configuration
 461  */
 462 #define RTC
 463 #define CONFIG_RTC_DS3231               1
 464 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 465
 466 /*
 467  * eSPI - Enhanced SPI
 468  */
 469 #define CONFIG_SF_DEFAULT_SPEED         10000000
 470 #define CONFIG_SF_DEFAULT_MODE          0
 471
 472 /*
 473  * General PCI
 474  * Memory space is mapped 1-1, but I/O space must start from 0.
 475  */
 476
 477 #ifdef CONFIG_PCI
 478 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 479 #ifdef CONFIG_PCIE1
 480 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 481 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 482 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 483 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000      /* 256M */
 484 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 485 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 486 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 487 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 488 #endif
 489
 490 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 491 #ifdef CONFIG_PCIE2
 492 #define CONFIG_SYS_PCIE2_MEM_VIRT       0x90000000
 493 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 494 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc10000000ull
 495 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000      /* 256M */
 496 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 497 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 498 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 499 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 500 #endif
 501
 502 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 503 #ifdef CONFIG_PCIE3
 504 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xa0000000
 505 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 506 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc20000000ull
 507 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x10000000      /* 256M */
 508 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 509 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 510 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 511 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 512 #endif
 513
 514 /* controller 4, Base address 203000 */
 515 #ifdef CONFIG_PCIE4
 516 #define CONFIG_SYS_PCIE4_MEM_VIRT       0xb0000000
 517 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 518 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc30000000ull
 519 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x10000000      /* 256M */
 520 #define CONFIG_SYS_PCIE4_IO_VIRT        0xf8030000
 521 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 522 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 523 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 524 #endif
 525
 526 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 527
 528 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 529 #define CONFIG_DOS_PARTITION
 530 #endif  /* CONFIG_PCI */
 531
 532 /* SATA */
 533 #define CONFIG_FSL_SATA_V2
 534 #ifdef CONFIG_FSL_SATA_V2
 535 #define CONFIG_LIBATA
 536 #define CONFIG_FSL_SATA
 537
 538 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 539 #define CONFIG_SATA1
 540 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 541 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 542 #define CONFIG_SATA2
 543 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 544 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 545
 546 #define CONFIG_LBA48
 547 #define CONFIG_CMD_SATA
 548 #define CONFIG_DOS_PARTITION
 549 #endif
 550
 551 /*
 552 * USB
 553 */
 554 #define CONFIG_HAS_FSL_DR_USB
 555
 556 #ifdef CONFIG_HAS_FSL_DR_USB
 557 #define CONFIG_USB_EHCI
 558
 559 #ifdef CONFIG_USB_EHCI
 560 #define CONFIG_USB_EHCI_FSL
 561 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 562 #endif
 563 #endif
 564
 565 #define CONFIG_MMC
 566
 567 #ifdef CONFIG_MMC
 568 #define CONFIG_FSL_ESDHC
 569 #define CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK
 570 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 571 #define CONFIG_GENERIC_MMC
 572 #define CONFIG_DOS_PARTITION
 573 #define CONFIG_FSL_ESDHC_ADAPTER_IDENT
 574 #endif
 575
 576 /* Qman/Bman */
 577 #ifndef CONFIG_NOBQFMAN
 578 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 579 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 580 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 581 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 582 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 583 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 584 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 585 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 586 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 587 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 588                                         CONFIG_SYS_BMAN_CENA_SIZE)
 589 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 590 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 591 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 592 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 593 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 594 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 595 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 596 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 597 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 598 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 599 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 600                                         CONFIG_SYS_QMAN_CENA_SIZE)
 601 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 602 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 603
 604 #define CONFIG_SYS_DPAA_FMAN
 605 #define CONFIG_SYS_DPAA_PME
 606
 607 #define CONFIG_QE
 608 #define CONFIG_U_QE
 609 /* Default address of microcode for the Linux Fman driver */
 610 #if defined(CONFIG_SPIFLASH)
 611 /*
 612  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 613  * env, so we got 0x110000.
 614  */
 615 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 616 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 617 #elif defined(CONFIG_SDCARD)
 618 /*
 619  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 620  * about 825KB (1650 blocks), Env is stored after the image, and the env size is
 621  * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
 622  */
 623 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 624 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680)
 625 #elif defined(CONFIG_NAND)
 626 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 627 #define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE)
 628 #else
 629 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 630 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 631 #define CONFIG_SYS_QE_FW_ADDR           0xEFF10000
 632 #endif
 633 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 634 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 635 #endif /* CONFIG_NOBQFMAN */
 636
 637 #ifdef CONFIG_SYS_DPAA_FMAN
 638 #define CONFIG_FMAN_ENET
 639 #define CONFIG_PHYLIB_10G
 640 #define CONFIG_PHY_VITESSE
 641 #define CONFIG_PHY_REALTEK
 642 #define CONFIG_PHY_TERANETICS
 643 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
 644 #define SGMII_CARD_PORT2_PHY_ADDR 0x10
 645 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
 646 #define SGMII_CARD_PORT4_PHY_ADDR 0x11
 647 #endif
 648
 649 #ifdef CONFIG_FMAN_ENET
 650 #define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR  0x01
 651 #define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR  0x02
 652
 653 #define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR    0x1c
 654 #define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR    0x1d
 655 #define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR    0x1e
 656 #define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR    0x1f
 657
 658 #define CONFIG_MII              /* MII PHY management */
 659 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 660 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 661 #endif
 662
 663 /* Enable VSC9953 L2 Switch driver */
 664 #define CONFIG_VSC9953
 665 #define CONFIG_CMD_ETHSW
 666 #define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR        0x14
 667 #define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR        0x18
 668
 669 /*
 670  * Dynamic MTD Partition support with mtdparts
 671  */
 672 #ifndef CONFIG_SYS_NO_FLASH
 673 #define CONFIG_MTD_DEVICE
 674 #define CONFIG_MTD_PARTITIONS
 675 #define CONFIG_CMD_MTDPARTS
 676 #define CONFIG_FLASH_CFI_MTD
 677 #define MTDIDS_DEFAULT "nor0=fe8000000.nor,nand0=fff800000.flash," \
 678                         "spi0=spife110000.0"
 679 #define MTDPARTS_DEFAULT        "mtdparts=fe8000000.nor:1m(uboot),5m(kernel)," \
 680                                 "128k(dtb),96m(fs),-(user);"\
 681                                 "fff800000.flash:2m(uboot),9m(kernel),"\
 682                                 "128k(dtb),96m(fs),-(user);spife110000.0:" \
 683                                 "2m(uboot),9m(kernel),128k(dtb),-(user)"
 684 #endif
 685
 686 /*
 687  * Environment
 688  */
 689 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 690 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 691
 692 /*
 693  * Command line configuration.
 694  */
 695 #define CONFIG_CMD_DATE
 696 #define CONFIG_CMD_EEPROM
 697 #define CONFIG_CMD_ERRATA
 698 #define CONFIG_CMD_IRQ
 699 #define CONFIG_CMD_REGINFO
 700
 701 #ifdef CONFIG_PCI
 702 #define CONFIG_CMD_PCI
 703 #endif
 704
 705 /* Hash command with SHA acceleration supported in hardware */
 706 #ifdef CONFIG_FSL_CAAM
 707 #define CONFIG_CMD_HASH
 708 #define CONFIG_SHA_HW_ACCEL
 709 #endif
 710
 711 /*
 712  * Miscellaneous configurable options
 713  */
 714 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 715 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 716 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 717 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 718 #ifdef CONFIG_CMD_KGDB
 719 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 720 #else
 721 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 722 #endif
 723 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 724 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 725 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 726
 727 /*
 728  * For booting Linux, the board info and command line data
 729  * have to be in the first 64 MB of memory, since this is
 730  * the maximum mapped by the Linux kernel during initialization.
 731  */
 732 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 733 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 734
 735 #ifdef CONFIG_CMD_KGDB
 736 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 737 #endif
 738
 739 /*
 740  * Environment Configuration
 741  */
 742 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 743 #define CONFIG_BOOTFILE         "uImage"
 744 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 745
 746 /* default location for tftp and bootm */
 747 #define CONFIG_LOADADDR         1000000
 748
 749
 750 #define CONFIG_BAUDRATE 115200
 751
 752 #define __USB_PHY_TYPE  utmi
 753
 754 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 755         "hwconfig=fsl_ddr:bank_intlv=auto;"                     \
 756         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 757         "netdev=eth0\0"                                         \
 758         "video-mode=fslfb:1024x768-32@60,monitor=dvi\0"         \
 759         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 760         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 761         "tftpflash=tftpboot $loadaddr $uboot && "               \
 762         "protect off $ubootaddr +$filesize && "                 \
 763         "erase $ubootaddr +$filesize && "                       \
 764         "cp.b $loadaddr $ubootaddr $filesize && "               \
 765         "protect on $ubootaddr +$filesize && "                  \
 766         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 767         "consoledev=ttyS0\0"                                    \
 768         "ramdiskaddr=2000000\0"                                 \
 769         "ramdiskfile=t1040qds/ramdisk.uboot\0"                  \
 770         "fdtaddr=1e00000\0"                                     \
 771         "fdtfile=t1040qds/t1040qds.dtb\0"                       \
 772         "bdev=sda3\0"
 773
 774 #define CONFIG_LINUX                       \
 775         "setenv bootargs root=/dev/ram rw "            \
 776         "console=$consoledev,$baudrate $othbootargs;"  \
 777         "setenv ramdiskaddr 0x02000000;"               \
 778         "setenv fdtaddr 0x00c00000;"                   \
 779         "setenv loadaddr 0x1000000;"                   \
 780         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 781
 782 #define CONFIG_HDBOOT                                   \
 783         "setenv bootargs root=/dev/$bdev rw "           \
 784         "console=$consoledev,$baudrate $othbootargs;"   \
 785         "tftp $loadaddr $bootfile;"                     \
 786         "tftp $fdtaddr $fdtfile;"                       \
 787         "bootm $loadaddr - $fdtaddr"
 788
 789 #define CONFIG_NFSBOOTCOMMAND                   \
 790         "setenv bootargs root=/dev/nfs rw "     \
 791         "nfsroot=$serverip:$rootpath "          \
 792         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 793         "console=$consoledev,$baudrate $othbootargs;"   \
 794         "tftp $loadaddr $bootfile;"             \
 795         "tftp $fdtaddr $fdtfile;"               \
 796         "bootm $loadaddr - $fdtaddr"
 797
 798 #define CONFIG_RAMBOOTCOMMAND                           \
 799         "setenv bootargs root=/dev/ram rw "             \
 800         "console=$consoledev,$baudrate $othbootargs;"   \
 801         "tftp $ramdiskaddr $ramdiskfile;"               \
 802         "tftp $loadaddr $bootfile;"                     \
 803         "tftp $fdtaddr $fdtfile;"                       \
 804         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 805
 806 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 807
 808 #include <asm/fsl_secure_boot.h>
 809
 810 #endif  /* __CONFIG_H */