include/configs/T104xRDB.h

   1 /*
   2 + * Copyright 2014 Freescale Semiconductor, Inc.
   3 + *
   4 + * SPDX-License-Identifier:     GPL-2.0+
   5 + */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 /*
  11  * T104x RDB board configuration file
  12  */
  13 #define CONFIG_T104xRDB
  14 #define CONFIG_PHYS_64BIT
  15
  16 #ifdef CONFIG_RAMBOOT_PBL
  17 #define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t104xrdb/t104x_pbi.cfg
  18 #ifdef CONFIG_T1040RDB
  19 #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t104xrdb/t1040_rcw.cfg
  20 #endif
  21 #ifdef CONFIG_T1042RDB_PI
  22 #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t104xrdb/t1042_pi_rcw.cfg
  23 #endif
  24 #ifdef CONFIG_T1042RDB
  25 #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t104xrdb/t1042_rcw.cfg
  26 #endif
  27
  28 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
  29 #define CONFIG_SPL_ENV_SUPPORT
  30 #define CONFIG_SPL_SERIAL_SUPPORT
  31 #define CONFIG_SPL_FLUSH_IMAGE
  32 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  33 #define CONFIG_SPL_LIBGENERIC_SUPPORT
  34 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  35 #define CONFIG_SPL_I2C_SUPPORT
  36 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT
  37 #define CONFIG_FSL_LAW                 /* Use common FSL init code */
  38 #define CONFIG_SYS_TEXT_BASE            0x30001000
  39 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
  40 #define CONFIG_SPL_PAD_TO               0x40000
  41 #define CONFIG_SPL_MAX_SIZE             0x28000
  42 #ifdef CONFIG_SPL_BUILD
  43 #define CONFIG_SPL_SKIP_RELOCATE
  44 #define CONFIG_SPL_COMMON_INIT_DDR
  45 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  46 #define CONFIG_SYS_NO_FLASH
  47 #endif
  48 #define RESET_VECTOR_OFFSET             0x27FFC
  49 #define BOOT_PAGE_OFFSET                0x27000
  50
  51 #ifdef CONFIG_NAND
  52 #define CONFIG_SPL_NAND_SUPPORT
  53 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  54 #define CONFIG_SYS_NAND_U_BOOT_DST      0x30000000
  55 #define CONFIG_SYS_NAND_U_BOOT_START    0x30000000
  56 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
  57 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  58 #define CONFIG_SPL_NAND_BOOT
  59 #endif
  60
  61 #ifdef CONFIG_SPIFLASH
  62 #define CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
  63 #define CONFIG_SPL_SPI_SUPPORT
  64 #define CONFIG_SPL_SPI_FLASH_SUPPORT
  65 #define CONFIG_SPL_SPI_FLASH_MINIMAL
  66 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (768 << 10)
  67 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x30000000)
  68 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x30000000)
  69 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (256 << 10)
  70 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  71 #ifndef CONFIG_SPL_BUILD
  72 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  73 #endif
  74 #define CONFIG_SPL_SPI_BOOT
  75 #endif
  76
  77 #ifdef CONFIG_SDCARD
  78 #define CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
  79 #define CONFIG_SPL_MMC_SUPPORT
  80 #define CONFIG_SPL_MMC_MINIMAL
  81 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
  82 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x30000000)
  83 #define CONFIG_SYS_MMC_U_BOOT_START     (0x30000000)
  84 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
  85 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  86 #ifndef CONFIG_SPL_BUILD
  87 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  88 #endif
  89 #define CONFIG_SPL_MMC_BOOT
  90 #endif
  91
  92 #endif
  93
  94 /* High Level Configuration Options */
  95 #define CONFIG_BOOKE
  96 #define CONFIG_E500                     /* BOOKE e500 family */
  97 #define CONFIG_E500MC                   /* BOOKE e500mc family */
  98 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  99 #define CONFIG_MP                       /* support multiple processors */
 100
 101 /* support deep sleep */
 102 #define CONFIG_DEEP_SLEEP
 103 #define CONFIG_SILENT_CONSOLE
 104
 105 #ifndef CONFIG_SYS_TEXT_BASE
 106 #define CONFIG_SYS_TEXT_BASE    0xeff40000
 107 #endif
 108
 109 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 110 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
 111 #endif
 112
 113 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
 114 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
 115 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
 116 #define CONFIG_FSL_CAAM                 /* Enable SEC/CAAM */
 117 #define CONFIG_PCI                      /* Enable PCI/PCIE */
 118 #define CONFIG_PCI_INDIRECT_BRIDGE
 119 #define CONFIG_PCIE1                    /* PCIE controler 1 */
 120 #define CONFIG_PCIE2                    /* PCIE controler 2 */
 121 #define CONFIG_PCIE3                    /* PCIE controler 3 */
 122 #define CONFIG_PCIE4                    /* PCIE controler 4 */
 123
 124 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
 125 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
 126
 127 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
 128
 129 #define CONFIG_ENV_OVERWRITE
 130
 131 #ifndef CONFIG_SYS_NO_FLASH
 132 #define CONFIG_FLASH_CFI_DRIVER
 133 #define CONFIG_SYS_FLASH_CFI
 134 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 135 #endif
 136
 137 #if defined(CONFIG_SPIFLASH)
 138 #define CONFIG_SYS_EXTRA_ENV_RELOC
 139 #define CONFIG_ENV_IS_IN_SPI_FLASH
 140 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 141 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 142 #define CONFIG_ENV_SECT_SIZE            0x10000
 143 #elif defined(CONFIG_SDCARD)
 144 #define CONFIG_SYS_EXTRA_ENV_RELOC
 145 #define CONFIG_ENV_IS_IN_MMC
 146 #define CONFIG_SYS_MMC_ENV_DEV          0
 147 #define CONFIG_ENV_SIZE                 0x2000
 148 #define CONFIG_ENV_OFFSET               (512 * 0x800)
 149 #elif defined(CONFIG_NAND)
 150 #define CONFIG_SYS_EXTRA_ENV_RELOC
 151 #define CONFIG_ENV_IS_IN_NAND
 152 #define CONFIG_ENV_SIZE                 0x2000
 153 #define CONFIG_ENV_OFFSET               (3 * CONFIG_SYS_NAND_BLOCK_SIZE)
 154 #else
 155 #define CONFIG_ENV_IS_IN_FLASH
 156 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 157 #define CONFIG_ENV_SIZE         0x2000
 158 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 159 #endif
 160
 161 #define CONFIG_SYS_CLK_FREQ     100000000
 162 #define CONFIG_DDR_CLK_FREQ     66666666
 163
 164 /*
 165  * These can be toggled for performance analysis, otherwise use default.
 166  */
 167 #define CONFIG_SYS_CACHE_STASHING
 168 #define CONFIG_BACKSIDE_L2_CACHE
 169 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
 170 #define CONFIG_BTB                      /* toggle branch predition */
 171 #define CONFIG_DDR_ECC
 172 #ifdef CONFIG_DDR_ECC
 173 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 174 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 175 #endif
 176
 177 #define CONFIG_ENABLE_36BIT_PHYS
 178
 179 #define CONFIG_ADDR_MAP
 180 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 181
 182 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 183 #define CONFIG_SYS_MEMTEST_END          0x00400000
 184 #define CONFIG_SYS_ALT_MEMTEST
 185 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 186
 187 /*
 188  *  Config the L3 Cache as L3 SRAM
 189  */
 190 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 191 #define CONFIG_SYS_L3_SIZE              256 << 10
 192 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
 193 #ifdef CONFIG_RAMBOOT_PBL
 194 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
 195 #endif
 196 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 197 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (30 << 10)
 198 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 199 #define CONFIG_SPL_RELOC_STACK_SIZE     (22 << 10)
 200
 201 #define CONFIG_SYS_DCSRBAR              0xf0000000
 202 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 203
 204 /*
 205  * DDR Setup
 206  */
 207 #define CONFIG_VERY_BIG_RAM
 208 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 209 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 210
 211 /* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */
 212 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 213 #define CONFIG_CHIP_SELECTS_PER_CTRL    (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
 214
 215 #define CONFIG_DDR_SPD
 216 #define CONFIG_SYS_DDR_RAW_TIMING
 217 #define CONFIG_SYS_FSL_DDR3
 218
 219 #define CONFIG_SYS_SPD_BUS_NUM  0
 220 #define SPD_EEPROM_ADDRESS      0x51
 221
 222 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 223
 224 /*
 225  * IFC Definitions
 226  */
 227 #define CONFIG_SYS_FLASH_BASE   0xe8000000
 228 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 229
 230 #define CONFIG_SYS_NOR_CSPR_EXT (0xf)
 231 #define CONFIG_SYS_NOR_CSPR     (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE) | \
 232                                 CSPR_PORT_SIZE_16 | \
 233                                 CSPR_MSEL_NOR | \
 234                                 CSPR_V)
 235 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 236
 237 /*
 238  * TDM Definition
 239  */
 240 #define T1040_TDM_QUIRK_CCSR_BASE       0xfe000000
 241
 242 /* NOR Flash Timing Params */
 243 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 244 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 245                                 FTIM0_NOR_TEADC(0x5) | \
 246                                 FTIM0_NOR_TEAHC(0x5))
 247 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 248                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 249                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 250 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 251                                 FTIM2_NOR_TCH(0x4) | \
 252                                 FTIM2_NOR_TWPH(0x0E) | \
 253                                 FTIM2_NOR_TWP(0x1c))
 254 #define CONFIG_SYS_NOR_FTIM3    0x0
 255
 256 #define CONFIG_SYS_FLASH_QUIET_TEST
 257 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 258
 259 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 260 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 261 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 262 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 263
 264 #define CONFIG_SYS_FLASH_EMPTY_INFO
 265 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 266
 267 /* CPLD on IFC */
 268 #define CPLD_LBMAP_MASK                 0x3F
 269 #define CPLD_BANK_SEL_MASK              0x07
 270 #define CPLD_BANK_OVERRIDE              0x40
 271 #define CPLD_LBMAP_ALTBANK              0x44 /* BANK OR | BANK 4 */
 272 #define CPLD_LBMAP_DFLTBANK             0x40 /* BANK OR | BANK0 */
 273 #define CPLD_LBMAP_RESET                0xFF
 274 #define CPLD_LBMAP_SHIFT                0x03
 275 #ifdef CONFIG_T1042RDB_PI
 276 #define CPLD_DIU_SEL_DFP                0x80
 277 #endif
 278
 279 #define CONFIG_SYS_CPLD_BASE    0xffdf0000
 280 #define CONFIG_SYS_CPLD_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
 281 #define CONFIG_SYS_CSPR2_EXT    (0xf)
 282 #define CONFIG_SYS_CSPR2        (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
 283                                 | CSPR_PORT_SIZE_8 \
 284                                 | CSPR_MSEL_GPCM \
 285                                 | CSPR_V)
 286 #define CONFIG_SYS_AMASK2       IFC_AMASK(64*1024)
 287 #define CONFIG_SYS_CSOR2        0x0
 288 /* CPLD Timing parameters for IFC CS2 */
 289 #define CONFIG_SYS_CS2_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 290                                         FTIM0_GPCM_TEADC(0x0e) | \
 291                                         FTIM0_GPCM_TEAHC(0x0e))
 292 #define CONFIG_SYS_CS2_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 293                                         FTIM1_GPCM_TRAD(0x1f))
 294 #define CONFIG_SYS_CS2_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 295                                         FTIM2_GPCM_TCH(0x8) | \
 296                                         FTIM2_GPCM_TWP(0x1f))
 297 #define CONFIG_SYS_CS2_FTIM3            0x0
 298
 299 /* NAND Flash on IFC */
 300 #define CONFIG_NAND_FSL_IFC
 301 #define CONFIG_SYS_NAND_BASE            0xff800000
 302 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 303
 304 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 305 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 306                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 307                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 308                                 | CSPR_V)
 309 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 310
 311 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 312                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 313                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 314                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 315                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 316                                 | CSOR_NAND_SPRZ_224/* Spare size = 224 */ \
 317                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 318
 319 #define CONFIG_SYS_NAND_ONFI_DETECTION
 320
 321 /* ONFI NAND Flash mode0 Timing Params */
 322 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 323                                         FTIM0_NAND_TWP(0x18)   | \
 324                                         FTIM0_NAND_TWCHT(0x07) | \
 325                                         FTIM0_NAND_TWH(0x0a))
 326 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 327                                         FTIM1_NAND_TWBE(0x39)  | \
 328                                         FTIM1_NAND_TRR(0x0e)   | \
 329                                         FTIM1_NAND_TRP(0x18))
 330 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 331                                         FTIM2_NAND_TREH(0x0a) | \
 332                                         FTIM2_NAND_TWHRE(0x1e))
 333 #define CONFIG_SYS_NAND_FTIM3           0x0
 334
 335 #define CONFIG_SYS_NAND_DDR_LAW         11
 336 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 337 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 338 #define CONFIG_MTD_NAND_VERIFY_WRITE
 339 #define CONFIG_CMD_NAND
 340
 341 #define CONFIG_SYS_NAND_BLOCK_SIZE      (512 * 1024)
 342
 343 #if defined(CONFIG_NAND)
 344 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 345 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 346 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 347 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 348 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 349 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 350 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 351 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 352 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR_CSPR_EXT
 353 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR_CSPR
 354 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 355 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 356 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 357 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 358 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 359 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 360 #else
 361 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR_CSPR_EXT
 362 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR_CSPR
 363 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 364 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 365 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 366 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 367 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 368 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 369 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NAND_CSPR_EXT
 370 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 371 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 372 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 373 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 374 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 375 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 376 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 377 #endif
 378
 379 #ifdef CONFIG_SPL_BUILD
 380 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 381 #else
 382 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 383 #endif
 384
 385 #if defined(CONFIG_RAMBOOT_PBL)
 386 #define CONFIG_SYS_RAMBOOT
 387 #endif
 388
 389 #define CONFIG_BOARD_EARLY_INIT_R
 390 #define CONFIG_MISC_INIT_R
 391
 392 #define CONFIG_HWCONFIG
 393
 394 /* define to use L1 as initial stack */
 395 #define CONFIG_L1_INIT_RAM
 396 #define CONFIG_SYS_INIT_RAM_LOCK
 397 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 398 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 399 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe0ec000
 400 /* The assembler doesn't like typecast */
 401 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 402         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 403           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 404 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 405
 406 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 407                                         GENERATED_GBL_DATA_SIZE)
 408 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 409
 410 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 411 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 412
 413 /* Serial Port - controlled on board with jumper J8
 414  * open - index 2
 415  * shorted - index 1
 416  */
 417 #define CONFIG_CONS_INDEX       1
 418 #define CONFIG_SYS_NS16550
 419 #define CONFIG_SYS_NS16550_SERIAL
 420 #define CONFIG_SYS_NS16550_REG_SIZE     1
 421 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 422
 423 #define CONFIG_SYS_BAUDRATE_TABLE       \
 424         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 425
 426 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 427 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 428 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 429 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 430 #define CONFIG_SERIAL_MULTI             /* Enable both serial ports */
 431 #ifndef CONFIG_SPL_BUILD
 432 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    /* determine from environment */
 433 #endif
 434
 435 /* Use the HUSH parser */
 436 #define CONFIG_SYS_HUSH_PARSER
 437 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 438
 439 #ifdef CONFIG_T1042RDB_PI
 440 /* Video */
 441 #define CONFIG_FSL_DIU_FB
 442
 443 #ifdef CONFIG_FSL_DIU_FB
 444 #define CONFIG_FSL_DIU_CH7301
 445 #define CONFIG_SYS_DIU_ADDR     (CONFIG_SYS_CCSRBAR + 0x180000)
 446 #define CONFIG_VIDEO
 447 #define CONFIG_CMD_BMP
 448 #define CONFIG_CFB_CONSOLE
 449 #define CONFIG_CFB_CONSOLE_ANSI
 450 #define CONFIG_VIDEO_SW_CURSOR
 451 #define CONFIG_VGA_AS_SINGLE_DEVICE
 452 #define CONFIG_VIDEO_LOGO
 453 #define CONFIG_VIDEO_BMP_LOGO
 454 #endif
 455 #endif
 456
 457 /* pass open firmware flat tree */
 458 #define CONFIG_OF_LIBFDT
 459 #define CONFIG_OF_BOARD_SETUP
 460 #define CONFIG_OF_STDOUT_VIA_ALIAS
 461
 462 /* new uImage format support */
 463 #define CONFIG_FIT
 464 #define CONFIG_FIT_VERBOSE      /* enable fit_format_{error,warning}() */
 465
 466 /* I2C */
 467 #define CONFIG_SYS_I2C
 468 #define CONFIG_SYS_I2C_FSL              /* Use FSL common I2C driver */
 469 #define CONFIG_SYS_FSL_I2C_SPEED        400000  /* I2C speed in Hz */
 470 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 471 #define CONFIG_SYS_FSL_I2C3_SPEED       400000
 472 #define CONFIG_SYS_FSL_I2C4_SPEED       400000
 473 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 474 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 475 #define CONFIG_SYS_FSL_I2C3_SLAVE       0x7F
 476 #define CONFIG_SYS_FSL_I2C4_SLAVE       0x7F
 477 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 478 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 479 #define CONFIG_SYS_FSL_I2C3_OFFSET      0x119000
 480 #define CONFIG_SYS_FSL_I2C4_OFFSET      0x119100
 481
 482 /* I2C bus multiplexer */
 483 #define I2C_MUX_PCA_ADDR                0x70
 484 #if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB)
 485 #define I2C_MUX_CH_DEFAULT      0x8
 486 #endif
 487
 488 #ifdef CONFIG_T1042RDB_PI
 489 /* LDI/DVI Encoder for display */
 490 #define CONFIG_SYS_I2C_LDI_ADDR         0x38
 491 #define CONFIG_SYS_I2C_DVI_ADDR         0x75
 492
 493 /*
 494  * RTC configuration
 495  */
 496 #define RTC
 497 #define CONFIG_RTC_DS1337               1
 498 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 499
 500 /*DVI encoder*/
 501 #define CONFIG_HDMI_ENCODER_I2C_ADDR  0x75
 502 #endif
 503
 504 /*
 505  * eSPI - Enhanced SPI
 506  */
 507 #define CONFIG_FSL_ESPI
 508 #define CONFIG_SPI_FLASH
 509 #define CONFIG_SPI_FLASH_STMICRO
 510 #define CONFIG_SPI_FLASH_BAR
 511 #define CONFIG_CMD_SF
 512 #define CONFIG_SF_DEFAULT_SPEED         10000000
 513 #define CONFIG_SF_DEFAULT_MODE          0
 514 #define CONFIG_ENV_SPI_BUS              0
 515 #define CONFIG_ENV_SPI_CS               0
 516 #define CONFIG_ENV_SPI_MAX_HZ           10000000
 517 #define CONFIG_ENV_SPI_MODE             0
 518
 519 /*
 520  * General PCI
 521  * Memory space is mapped 1-1, but I/O space must start from 0.
 522  */
 523
 524 #ifdef CONFIG_PCI
 525 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 526 #ifdef CONFIG_PCIE1
 527 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 528 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 529 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 530 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000      /* 256M */
 531 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 532 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 533 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 534 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 535 #endif
 536
 537 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 538 #ifdef CONFIG_PCIE2
 539 #define CONFIG_SYS_PCIE2_MEM_VIRT       0x90000000
 540 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 541 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc10000000ull
 542 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000      /* 256M */
 543 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 544 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 545 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 546 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 547 #endif
 548
 549 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 550 #ifdef CONFIG_PCIE3
 551 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xa0000000
 552 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 553 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc20000000ull
 554 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x10000000      /* 256M */
 555 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 556 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 557 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 558 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 559 #endif
 560
 561 /* controller 4, Base address 203000 */
 562 #ifdef CONFIG_PCIE4
 563 #define CONFIG_SYS_PCIE4_MEM_VIRT       0xb0000000
 564 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 565 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc30000000ull
 566 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x10000000      /* 256M */
 567 #define CONFIG_SYS_PCIE4_IO_VIRT        0xf8030000
 568 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 569 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 570 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 571 #endif
 572
 573 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 574 #define CONFIG_E1000
 575
 576 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 577 #define CONFIG_DOS_PARTITION
 578 #endif  /* CONFIG_PCI */
 579
 580 /* SATA */
 581 #define CONFIG_FSL_SATA_V2
 582 #ifdef CONFIG_FSL_SATA_V2
 583 #define CONFIG_LIBATA
 584 #define CONFIG_FSL_SATA
 585
 586 #define CONFIG_SYS_SATA_MAX_DEVICE      1
 587 #define CONFIG_SATA1
 588 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 589 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 590
 591 #define CONFIG_LBA48
 592 #define CONFIG_CMD_SATA
 593 #define CONFIG_DOS_PARTITION
 594 #define CONFIG_CMD_EXT2
 595 #endif
 596
 597 /*
 598 * USB
 599 */
 600 #define CONFIG_HAS_FSL_DR_USB
 601
 602 #ifdef CONFIG_HAS_FSL_DR_USB
 603 #define CONFIG_USB_EHCI
 604
 605 #ifdef CONFIG_USB_EHCI
 606 #define CONFIG_CMD_USB
 607 #define CONFIG_USB_STORAGE
 608 #define CONFIG_USB_EHCI_FSL
 609 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 610 #define CONFIG_CMD_EXT2
 611 #endif
 612 #endif
 613
 614 #define CONFIG_MMC
 615
 616 #ifdef CONFIG_MMC
 617 #define CONFIG_FSL_ESDHC
 618 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 619 #define CONFIG_CMD_MMC
 620 #define CONFIG_GENERIC_MMC
 621 #define CONFIG_CMD_EXT2
 622 #define CONFIG_CMD_FAT
 623 #define CONFIG_DOS_PARTITION
 624 #endif
 625
 626 /* Qman/Bman */
 627 #ifndef CONFIG_NOBQFMAN
 628 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 629 #define CONFIG_SYS_BMAN_NUM_PORTALS     25
 630 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 631 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 632 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 633 #define CONFIG_SYS_QMAN_NUM_PORTALS     25
 634 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 635 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 636 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 637
 638 #define CONFIG_SYS_DPAA_FMAN
 639 #define CONFIG_SYS_DPAA_PME
 640
 641 #if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB)
 642 #define CONFIG_QE
 643 #define CONFIG_U_QE
 644 #endif
 645
 646 /* Default address of microcode for the Linux Fman driver */
 647 #if defined(CONFIG_SPIFLASH)
 648 /*
 649  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 650  * env, so we got 0x110000.
 651  */
 652 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 653 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 654 #elif defined(CONFIG_SDCARD)
 655 /*
 656  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 657  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 658  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
 659  */
 660 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 661 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820)
 662 #elif defined(CONFIG_NAND)
 663 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 664 #define CONFIG_SYS_FMAN_FW_ADDR (5 * CONFIG_SYS_NAND_BLOCK_SIZE)
 665 #else
 666 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 667 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 668 #endif
 669
 670 #if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB)
 671 #if defined(CONFIG_SPIFLASH)
 672 #define CONFIG_SYS_QE_FW_ADDR           0x130000
 673 #elif defined(CONFIG_SDCARD)
 674 #define CONFIG_SYS_QE_FW_ADDR           (512 * 0x920)
 675 #elif defined(CONFIG_NAND)
 676 #define CONFIG_SYS_QE_FW_ADDR           (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
 677 #else
 678 #define CONFIG_SYS_QE_FW_ADDR           0xEFF10000
 679 #endif
 680 #endif
 681
 682
 683 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 684 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 685 #endif /* CONFIG_NOBQFMAN */
 686
 687 #ifdef CONFIG_SYS_DPAA_FMAN
 688 #define CONFIG_FMAN_ENET
 689 #define CONFIG_PHY_VITESSE
 690 #define CONFIG_PHY_REALTEK
 691 #endif
 692
 693 #ifdef CONFIG_FMAN_ENET
 694 #if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB)
 695 #define CONFIG_SYS_SGMII1_PHY_ADDR              0x03
 696 #endif
 697 #define CONFIG_SYS_RGMII1_PHY_ADDR              0x01
 698 #define CONFIG_SYS_RGMII2_PHY_ADDR              0x02
 699
 700 #define CONFIG_MII              /* MII PHY management */
 701 #define CONFIG_ETHPRIME         "FM1@DTSEC4"
 702 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 703 #endif
 704
 705 /*
 706  * Environment
 707  */
 708 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 709 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 710
 711 /*
 712  * Command line configuration.
 713  */
 714 #include <config_cmd_default.h>
 715
 716 #ifdef CONFIG_T1042RDB_PI
 717 #define CONFIG_CMD_DATE
 718 #endif
 719 #define CONFIG_CMD_DHCP
 720 #define CONFIG_CMD_ELF
 721 #define CONFIG_CMD_ERRATA
 722 #define CONFIG_CMD_GREPENV
 723 #define CONFIG_CMD_IRQ
 724 #define CONFIG_CMD_I2C
 725 #define CONFIG_CMD_MII
 726 #define CONFIG_CMD_PING
 727 #define CONFIG_CMD_REGINFO
 728 #define CONFIG_CMD_SETEXPR
 729
 730 #ifdef CONFIG_PCI
 731 #define CONFIG_CMD_PCI
 732 #define CONFIG_CMD_NET
 733 #endif
 734
 735 /* Hash command with SHA acceleration supported in hardware */
 736 #ifdef CONFIG_FSL_CAAM
 737 #define CONFIG_CMD_HASH
 738 #define CONFIG_SHA_HW_ACCEL
 739 #endif
 740
 741 /*
 742  * Miscellaneous configurable options
 743  */
 744 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 745 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 746 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 747 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 748 #ifdef CONFIG_CMD_KGDB
 749 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 750 #else
 751 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 752 #endif
 753 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 754 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 755 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 756
 757 /*
 758  * For booting Linux, the board info and command line data
 759  * have to be in the first 64 MB of memory, since this is
 760  * the maximum mapped by the Linux kernel during initialization.
 761  */
 762 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 763 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 764
 765 #ifdef CONFIG_CMD_KGDB
 766 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 767 #endif
 768
 769 /*
 770  * Dynamic MTD Partition support with mtdparts
 771  */
 772 #ifndef CONFIG_SYS_NO_FLASH
 773 #define CONFIG_MTD_DEVICE
 774 #define CONFIG_MTD_PARTITIONS
 775 #define CONFIG_CMD_MTDPARTS
 776 #define CONFIG_FLASH_CFI_MTD
 777 #define MTDIDS_DEFAULT "nor0=fe8000000.nor,nand0=fff800000.flash," \
 778                         "spi0=spife110000.0"
 779 #define MTDPARTS_DEFAULT        "mtdparts=fe8000000.nor:1m(uboot),5m(kernel)," \
 780                                 "128k(dtb),96m(fs),-(user);"\
 781                                 "fff800000.flash:2m(uboot),9m(kernel),"\
 782                                 "128k(dtb),96m(fs),-(user);spife110000.0:" \
 783                                 "2m(uboot),9m(kernel),128k(dtb),-(user)"
 784 #endif
 785
 786 /*
 787  * Environment Configuration
 788  */
 789 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 790 #define CONFIG_BOOTFILE         "uImage"
 791 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 792
 793 /* default location for tftp and bootm */
 794 #define CONFIG_LOADADDR         1000000
 795
 796 #define CONFIG_BOOTDELAY        10      /*-1 disables auto-boot*/
 797
 798 #define CONFIG_BAUDRATE 115200
 799
 800 #define __USB_PHY_TYPE  utmi
 801 #define RAMDISKFILE     "t104xrdb/ramdisk.uboot"
 802
 803 #ifdef CONFIG_T1040RDB
 804 #define FDTFILE         "t1040rdb/t1040rdb.dtb"
 805 #elif defined(CONFIG_T1042RDB_PI)
 806 #define FDTFILE         "t1042rdb_pi/t1042rdb_pi.dtb"
 807 #elif defined(CONFIG_T1042RDB)
 808 #define FDTFILE         "t1042rdb/t1042rdb.dtb"
 809 #endif
 810
 811 #ifdef CONFIG_FSL_DIU_FB
 812 #define DIU_ENVIRONMENT "video-mode=fslfb:1024x768-32@60,monitor=dvi"
 813 #else
 814 #define DIU_ENVIRONMENT
 815 #endif
 816
 817 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 818         "hwconfig=fsl_ddr:bank_intlv=cs0_cs1;"                  \
 819         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\
 820         "usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 821         "netdev=eth0\0"                                         \
 822         "video-mode=" __stringify(DIU_ENVIRONMENT) "\0"         \
 823         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 824         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 825         "tftpflash=tftpboot $loadaddr $uboot && "               \
 826         "protect off $ubootaddr +$filesize && "                 \
 827         "erase $ubootaddr +$filesize && "                       \
 828         "cp.b $loadaddr $ubootaddr $filesize && "               \
 829         "protect on $ubootaddr +$filesize && "                  \
 830         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 831         "consoledev=ttyS0\0"                                    \
 832         "ramdiskaddr=2000000\0"                                 \
 833         "ramdiskfile=" __stringify(RAMDISKFILE) "\0"            \
 834         "fdtaddr=c00000\0"                                      \
 835         "fdtfile=" __stringify(FDTFILE) "\0"                    \
 836         "bdev=sda3\0"
 837
 838 #define CONFIG_LINUX                       \
 839         "setenv bootargs root=/dev/ram rw "            \
 840         "console=$consoledev,$baudrate $othbootargs;"  \
 841         "setenv ramdiskaddr 0x02000000;"               \
 842         "setenv fdtaddr 0x00c00000;"                   \
 843         "setenv loadaddr 0x1000000;"                   \
 844         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 845
 846 #define CONFIG_HDBOOT                                   \
 847         "setenv bootargs root=/dev/$bdev rw "           \
 848         "console=$consoledev,$baudrate $othbootargs;"   \
 849         "tftp $loadaddr $bootfile;"                     \
 850         "tftp $fdtaddr $fdtfile;"                       \
 851         "bootm $loadaddr - $fdtaddr"
 852
 853 #define CONFIG_NFSBOOTCOMMAND                   \
 854         "setenv bootargs root=/dev/nfs rw "     \
 855         "nfsroot=$serverip:$rootpath "          \
 856         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 857         "console=$consoledev,$baudrate $othbootargs;"   \
 858         "tftp $loadaddr $bootfile;"             \
 859         "tftp $fdtaddr $fdtfile;"               \
 860         "bootm $loadaddr - $fdtaddr"
 861
 862 #define CONFIG_RAMBOOTCOMMAND                           \
 863         "setenv bootargs root=/dev/ram rw "             \
 864         "console=$consoledev,$baudrate $othbootargs;"   \
 865         "tftp $ramdiskaddr $ramdiskfile;"               \
 866         "tftp $loadaddr $bootfile;"                     \
 867         "tftp $fdtaddr $fdtfile;"                       \
 868         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 869
 870 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 871
 872 #ifdef CONFIG_SECURE_BOOT
 873 #include <asm/fsl_secure_boot.h>
 874 #define CONFIG_CMD_BLOB
 875 #endif
 876
 877 #endif  /* __CONFIG_H */