include/configs/T104xRDB.h

   1 /*
   2 + * Copyright 2014 Freescale Semiconductor, Inc.
   3 + *
   4 + * SPDX-License-Identifier:     GPL-2.0+
   5 + */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 /*
  11  * T104x RDB board configuration file
  12  */
  13 #define CONFIG_T104xRDB
  14 #define CONFIG_PHYS_64BIT
  15 #define CONFIG_DISPLAY_BOARDINFO
  16
  17 #define CONFIG_E500                     /* BOOKE e500 family */
  18 #include <asm/config_mpc85xx.h>
  19
  20 #ifdef CONFIG_RAMBOOT_PBL
  21
  22 #ifndef CONFIG_SECURE_BOOT
  23 #define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t104xrdb/t104x_pbi.cfg
  24 #else
  25 #define CONFIG_SYS_FSL_PBL_PBI \
  26                 $(SRCTREE)/board/freescale/t104xrdb/t104x_pbi_sb.cfg
  27 #endif
  28
  29 #ifdef CONFIG_T1040RDB
  30 #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t104xrdb/t1040_rcw.cfg
  31 #endif
  32 #ifdef CONFIG_T1042RDB_PI
  33 #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t104xrdb/t1042_pi_rcw.cfg
  34 #endif
  35 #ifdef CONFIG_T1042RDB
  36 #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t104xrdb/t1042_rcw.cfg
  37 #endif
  38 #ifdef CONFIG_T1040D4RDB
  39 #define CONFIG_SYS_FSL_PBL_RCW \
  40 $(SRCTREE)/board/freescale/t104xrdb/t1040d4_rcw.cfg
  41 #endif
  42 #ifdef CONFIG_T1042D4RDB
  43 #define CONFIG_SYS_FSL_PBL_RCW \
  44 $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
  45 #endif
  46
  47 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
  48 #define CONFIG_SPL_ENV_SUPPORT
  49 #define CONFIG_SPL_SERIAL_SUPPORT
  50 #define CONFIG_SPL_FLUSH_IMAGE
  51 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  52 #define CONFIG_SPL_LIBGENERIC_SUPPORT
  53 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  54 #define CONFIG_SPL_I2C_SUPPORT
  55 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT
  56 #define CONFIG_FSL_LAW                 /* Use common FSL init code */
  57 #define CONFIG_SYS_TEXT_BASE            0x30001000
  58 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
  59 #define CONFIG_SPL_PAD_TO               0x40000
  60 #define CONFIG_SPL_MAX_SIZE             0x28000
  61 #ifdef CONFIG_SPL_BUILD
  62 #define CONFIG_SPL_SKIP_RELOCATE
  63 #define CONFIG_SPL_COMMON_INIT_DDR
  64 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  65 #define CONFIG_SYS_NO_FLASH
  66 #endif
  67 #define RESET_VECTOR_OFFSET             0x27FFC
  68 #define BOOT_PAGE_OFFSET                0x27000
  69
  70 #ifdef CONFIG_NAND
  71 #define CONFIG_SPL_NAND_SUPPORT
  72 #ifdef CONFIG_SECURE_BOOT
  73 #define CONFIG_U_BOOT_HDR_SIZE          (16 << 10)
  74 /*
  75  * HDR would be appended at end of image and copied to DDR along
  76  * with U-Boot image.
  77  */
  78 #define CONFIG_SYS_NAND_U_BOOT_SIZE     ((768 << 10) + \
  79                                          CONFIG_U_BOOT_HDR_SIZE)
  80 #else
  81 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  82 #endif
  83 #define CONFIG_SYS_NAND_U_BOOT_DST      0x30000000
  84 #define CONFIG_SYS_NAND_U_BOOT_START    0x30000000
  85 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
  86 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  87 #define CONFIG_SPL_NAND_BOOT
  88 #endif
  89
  90 #ifdef CONFIG_SPIFLASH
  91 #define CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
  92 #define CONFIG_SPL_SPI_SUPPORT
  93 #define CONFIG_SPL_SPI_FLASH_SUPPORT
  94 #define CONFIG_SPL_SPI_FLASH_MINIMAL
  95 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (768 << 10)
  96 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x30000000)
  97 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x30000000)
  98 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (256 << 10)
  99 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
 100 #ifndef CONFIG_SPL_BUILD
 101 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 102 #endif
 103 #define CONFIG_SPL_SPI_BOOT
 104 #endif
 105
 106 #ifdef CONFIG_SDCARD
 107 #define CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
 108 #define CONFIG_SPL_MMC_SUPPORT
 109 #define CONFIG_SPL_MMC_MINIMAL
 110 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
 111 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x30000000)
 112 #define CONFIG_SYS_MMC_U_BOOT_START     (0x30000000)
 113 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
 114 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
 115 #ifndef CONFIG_SPL_BUILD
 116 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 117 #endif
 118 #define CONFIG_SPL_MMC_BOOT
 119 #endif
 120
 121 #endif
 122
 123 /* High Level Configuration Options */
 124 #define CONFIG_BOOKE
 125 #define CONFIG_E500MC                   /* BOOKE e500mc family */
 126 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
 127 #define CONFIG_MP                       /* support multiple processors */
 128
 129 /* support deep sleep */
 130 #define CONFIG_DEEP_SLEEP
 131 #if defined(CONFIG_DEEP_SLEEP)
 132 #define CONFIG_BOARD_EARLY_INIT_F
 133 #define CONFIG_SILENT_CONSOLE
 134 #endif
 135
 136 #ifndef CONFIG_SYS_TEXT_BASE
 137 #define CONFIG_SYS_TEXT_BASE    0xeff40000
 138 #endif
 139
 140 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 141 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
 142 #endif
 143
 144 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
 145 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
 146 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
 147 #define CONFIG_FSL_CAAM                 /* Enable SEC/CAAM */
 148 #define CONFIG_PCI                      /* Enable PCI/PCIE */
 149 #define CONFIG_PCI_INDIRECT_BRIDGE
 150 #define CONFIG_PCIE1                    /* PCIE controller 1 */
 151 #define CONFIG_PCIE2                    /* PCIE controller 2 */
 152 #define CONFIG_PCIE3                    /* PCIE controller 3 */
 153 #define CONFIG_PCIE4                    /* PCIE controller 4 */
 154
 155 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
 156 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
 157
 158 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
 159
 160 #define CONFIG_ENV_OVERWRITE
 161
 162 #ifndef CONFIG_SYS_NO_FLASH
 163 #define CONFIG_FLASH_CFI_DRIVER
 164 #define CONFIG_SYS_FLASH_CFI
 165 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 166 #endif
 167
 168 #if defined(CONFIG_SPIFLASH)
 169 #define CONFIG_SYS_EXTRA_ENV_RELOC
 170 #define CONFIG_ENV_IS_IN_SPI_FLASH
 171 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 172 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 173 #define CONFIG_ENV_SECT_SIZE            0x10000
 174 #elif defined(CONFIG_SDCARD)
 175 #define CONFIG_SYS_EXTRA_ENV_RELOC
 176 #define CONFIG_ENV_IS_IN_MMC
 177 #define CONFIG_SYS_MMC_ENV_DEV          0
 178 #define CONFIG_ENV_SIZE                 0x2000
 179 #define CONFIG_ENV_OFFSET               (512 * 0x800)
 180 #elif defined(CONFIG_NAND)
 181 #ifdef CONFIG_SECURE_BOOT
 182 #define CONFIG_RAMBOOT_NAND
 183 #define CONFIG_BOOTSCRIPT_COPY_RAM
 184 #endif
 185 #define CONFIG_SYS_EXTRA_ENV_RELOC
 186 #define CONFIG_ENV_IS_IN_NAND
 187 #define CONFIG_ENV_SIZE                 0x2000
 188 #define CONFIG_ENV_OFFSET               (3 * CONFIG_SYS_NAND_BLOCK_SIZE)
 189 #else
 190 #define CONFIG_ENV_IS_IN_FLASH
 191 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 192 #define CONFIG_ENV_SIZE         0x2000
 193 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 194 #endif
 195
 196 #define CONFIG_SYS_CLK_FREQ     100000000
 197 #define CONFIG_DDR_CLK_FREQ     66666666
 198
 199 /*
 200  * These can be toggled for performance analysis, otherwise use default.
 201  */
 202 #define CONFIG_SYS_CACHE_STASHING
 203 #define CONFIG_BACKSIDE_L2_CACHE
 204 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
 205 #define CONFIG_BTB                      /* toggle branch predition */
 206 #define CONFIG_DDR_ECC
 207 #ifdef CONFIG_DDR_ECC
 208 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 209 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 210 #endif
 211
 212 #define CONFIG_ENABLE_36BIT_PHYS
 213
 214 #define CONFIG_ADDR_MAP
 215 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 216
 217 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 218 #define CONFIG_SYS_MEMTEST_END          0x00400000
 219 #define CONFIG_SYS_ALT_MEMTEST
 220 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 221
 222 /*
 223  *  Config the L3 Cache as L3 SRAM
 224  */
 225 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 226 /*
 227  * For Secure Boot CONFIG_SYS_INIT_L3_ADDR will be redefined and hence
 228  * Physical address (CONFIG_SYS_INIT_L3_ADDR) and virtual address
 229  * (CONFIG_SYS_INIT_L3_VADDR) will be different.
 230  */
 231 #define CONFIG_SYS_INIT_L3_VADDR        0xFFFC0000
 232 #define CONFIG_SYS_L3_SIZE              256 << 10
 233 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_VADDR + 32 * 1024)
 234 #ifdef CONFIG_RAMBOOT_PBL
 235 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
 236 #endif
 237 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 238 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (30 << 10)
 239 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 240 #define CONFIG_SPL_RELOC_STACK_SIZE     (22 << 10)
 241
 242 #define CONFIG_SYS_DCSRBAR              0xf0000000
 243 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 244
 245 /*
 246  * DDR Setup
 247  */
 248 #define CONFIG_VERY_BIG_RAM
 249 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 250 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 251
 252 /* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */
 253 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 254 #define CONFIG_CHIP_SELECTS_PER_CTRL    (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
 255
 256 #define CONFIG_DDR_SPD
 257 #ifndef CONFIG_SYS_FSL_DDR4
 258 #define CONFIG_SYS_FSL_DDR3
 259 #endif
 260
 261 #define CONFIG_SYS_SPD_BUS_NUM  0
 262 #define SPD_EEPROM_ADDRESS      0x51
 263
 264 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 265
 266 /*
 267  * IFC Definitions
 268  */
 269 #define CONFIG_SYS_FLASH_BASE   0xe8000000
 270 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 271
 272 #define CONFIG_SYS_NOR_CSPR_EXT (0xf)
 273 #define CONFIG_SYS_NOR_CSPR     (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE) | \
 274                                 CSPR_PORT_SIZE_16 | \
 275                                 CSPR_MSEL_NOR | \
 276                                 CSPR_V)
 277 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 278
 279 /*
 280  * TDM Definition
 281  */
 282 #define T1040_TDM_QUIRK_CCSR_BASE       0xfe000000
 283
 284 /* NOR Flash Timing Params */
 285 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 286 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 287                                 FTIM0_NOR_TEADC(0x5) | \
 288                                 FTIM0_NOR_TEAHC(0x5))
 289 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 290                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 291                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 292 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 293                                 FTIM2_NOR_TCH(0x4) | \
 294                                 FTIM2_NOR_TWPH(0x0E) | \
 295                                 FTIM2_NOR_TWP(0x1c))
 296 #define CONFIG_SYS_NOR_FTIM3    0x0
 297
 298 #define CONFIG_SYS_FLASH_QUIET_TEST
 299 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 300
 301 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 302 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 303 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 304 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 305
 306 #define CONFIG_SYS_FLASH_EMPTY_INFO
 307 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 308
 309 /* CPLD on IFC */
 310 #define CPLD_LBMAP_MASK                 0x3F
 311 #define CPLD_BANK_SEL_MASK              0x07
 312 #define CPLD_BANK_OVERRIDE              0x40
 313 #define CPLD_LBMAP_ALTBANK              0x44 /* BANK OR | BANK 4 */
 314 #define CPLD_LBMAP_DFLTBANK             0x40 /* BANK OR | BANK0 */
 315 #define CPLD_LBMAP_RESET                0xFF
 316 #define CPLD_LBMAP_SHIFT                0x03
 317
 318 #if defined(CONFIG_T1042RDB_PI)
 319 #define CPLD_DIU_SEL_DFP                0x80
 320 #elif defined(CONFIG_T1042D4RDB)
 321 #define CPLD_DIU_SEL_DFP                0xc0
 322 #endif
 323
 324 #if defined(CONFIG_T1040D4RDB)
 325 #define CPLD_INT_MASK_ALL               0xFF
 326 #define CPLD_INT_MASK_THERM             0x80
 327 #define CPLD_INT_MASK_DVI_DFP           0x40
 328 #define CPLD_INT_MASK_QSGMII1           0x20
 329 #define CPLD_INT_MASK_QSGMII2           0x10
 330 #define CPLD_INT_MASK_SGMI1             0x08
 331 #define CPLD_INT_MASK_SGMI2             0x04
 332 #define CPLD_INT_MASK_TDMR1             0x02
 333 #define CPLD_INT_MASK_TDMR2             0x01
 334 #endif
 335
 336 #define CONFIG_SYS_CPLD_BASE    0xffdf0000
 337 #define CONFIG_SYS_CPLD_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
 338 #define CONFIG_SYS_CSPR2_EXT    (0xf)
 339 #define CONFIG_SYS_CSPR2        (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
 340                                 | CSPR_PORT_SIZE_8 \
 341                                 | CSPR_MSEL_GPCM \
 342                                 | CSPR_V)
 343 #define CONFIG_SYS_AMASK2       IFC_AMASK(64*1024)
 344 #define CONFIG_SYS_CSOR2        0x0
 345 /* CPLD Timing parameters for IFC CS2 */
 346 #define CONFIG_SYS_CS2_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 347                                         FTIM0_GPCM_TEADC(0x0e) | \
 348                                         FTIM0_GPCM_TEAHC(0x0e))
 349 #define CONFIG_SYS_CS2_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 350                                         FTIM1_GPCM_TRAD(0x1f))
 351 #define CONFIG_SYS_CS2_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 352                                         FTIM2_GPCM_TCH(0x8) | \
 353                                         FTIM2_GPCM_TWP(0x1f))
 354 #define CONFIG_SYS_CS2_FTIM3            0x0
 355
 356 /* NAND Flash on IFC */
 357 #define CONFIG_NAND_FSL_IFC
 358 #define CONFIG_SYS_NAND_BASE            0xff800000
 359 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 360
 361 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 362 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 363                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 364                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 365                                 | CSPR_V)
 366 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 367
 368 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 369                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 370                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 371                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 372                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 373                                 | CSOR_NAND_SPRZ_224/* Spare size = 224 */ \
 374                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 375
 376 #define CONFIG_SYS_NAND_ONFI_DETECTION
 377
 378 /* ONFI NAND Flash mode0 Timing Params */
 379 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 380                                         FTIM0_NAND_TWP(0x18)   | \
 381                                         FTIM0_NAND_TWCHT(0x07) | \
 382                                         FTIM0_NAND_TWH(0x0a))
 383 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 384                                         FTIM1_NAND_TWBE(0x39)  | \
 385                                         FTIM1_NAND_TRR(0x0e)   | \
 386                                         FTIM1_NAND_TRP(0x18))
 387 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 388                                         FTIM2_NAND_TREH(0x0a) | \
 389                                         FTIM2_NAND_TWHRE(0x1e))
 390 #define CONFIG_SYS_NAND_FTIM3           0x0
 391
 392 #define CONFIG_SYS_NAND_DDR_LAW         11
 393 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 394 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 395 #define CONFIG_CMD_NAND
 396
 397 #define CONFIG_SYS_NAND_BLOCK_SIZE      (512 * 1024)
 398
 399 #if defined(CONFIG_NAND)
 400 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 401 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 402 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 403 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 404 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 405 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 406 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 407 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 408 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR_CSPR_EXT
 409 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR_CSPR
 410 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 411 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 412 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 413 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 414 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 415 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 416 #else
 417 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR_CSPR_EXT
 418 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR_CSPR
 419 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 420 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 421 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 422 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 423 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 424 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 425 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NAND_CSPR_EXT
 426 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 427 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 428 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 429 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 430 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 431 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 432 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 433 #endif
 434
 435 #ifdef CONFIG_SPL_BUILD
 436 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 437 #else
 438 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 439 #endif
 440
 441 #if defined(CONFIG_RAMBOOT_PBL)
 442 #define CONFIG_SYS_RAMBOOT
 443 #endif
 444
 445 #ifdef CONFIG_SYS_FSL_ERRATUM_A008044
 446 #if defined(CONFIG_NAND)
 447 #define CONFIG_A008044_WORKAROUND
 448 #endif
 449 #endif
 450
 451 #define CONFIG_BOARD_EARLY_INIT_R
 452 #define CONFIG_MISC_INIT_R
 453
 454 #define CONFIG_HWCONFIG
 455
 456 /* define to use L1 as initial stack */
 457 #define CONFIG_L1_INIT_RAM
 458 #define CONFIG_SYS_INIT_RAM_LOCK
 459 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 460 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 461 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 462 /* The assembler doesn't like typecast */
 463 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 464         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 465           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 466 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 467
 468 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 469                                         GENERATED_GBL_DATA_SIZE)
 470 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 471
 472 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 473 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 474
 475 /* Serial Port - controlled on board with jumper J8
 476  * open - index 2
 477  * shorted - index 1
 478  */
 479 #define CONFIG_CONS_INDEX       1
 480 #define CONFIG_SYS_NS16550_SERIAL
 481 #define CONFIG_SYS_NS16550_REG_SIZE     1
 482 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 483
 484 #define CONFIG_SYS_BAUDRATE_TABLE       \
 485         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 486
 487 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 488 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 489 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 490 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 491 #ifndef CONFIG_SPL_BUILD
 492 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    /* determine from environment */
 493 #endif
 494
 495 #if defined(CONFIG_T1042RDB_PI) || defined(CONFIG_T1042D4RDB)
 496 /* Video */
 497 #define CONFIG_FSL_DIU_FB
 498
 499 #ifdef CONFIG_FSL_DIU_FB
 500 #define CONFIG_FSL_DIU_CH7301
 501 #define CONFIG_SYS_DIU_ADDR     (CONFIG_SYS_CCSRBAR + 0x180000)
 502 #define CONFIG_VIDEO
 503 #define CONFIG_CMD_BMP
 504 #define CONFIG_CFB_CONSOLE
 505 #define CONFIG_CFB_CONSOLE_ANSI
 506 #define CONFIG_VIDEO_SW_CURSOR
 507 #define CONFIG_VGA_AS_SINGLE_DEVICE
 508 #define CONFIG_VIDEO_LOGO
 509 #define CONFIG_VIDEO_BMP_LOGO
 510 #endif
 511 #endif
 512
 513 /* I2C */
 514 #define CONFIG_SYS_I2C
 515 #define CONFIG_SYS_I2C_FSL              /* Use FSL common I2C driver */
 516 #define CONFIG_SYS_FSL_I2C_SPEED        400000  /* I2C speed in Hz */
 517 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 518 #define CONFIG_SYS_FSL_I2C3_SPEED       400000
 519 #define CONFIG_SYS_FSL_I2C4_SPEED       400000
 520 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 521 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 522 #define CONFIG_SYS_FSL_I2C3_SLAVE       0x7F
 523 #define CONFIG_SYS_FSL_I2C4_SLAVE       0x7F
 524 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 525 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 526 #define CONFIG_SYS_FSL_I2C3_OFFSET      0x119000
 527 #define CONFIG_SYS_FSL_I2C4_OFFSET      0x119100
 528
 529 /* I2C bus multiplexer */
 530 #define I2C_MUX_PCA_ADDR                0x70
 531 #if defined(CONFIG_T104xRDB) || defined(CONFIG_T104XD4RDB)
 532 #define I2C_MUX_CH_DEFAULT      0x8
 533 #endif
 534
 535 #if defined(CONFIG_T1042RDB_PI) || defined(CONFIG_T104XD4RDB)
 536 /* LDI/DVI Encoder for display */
 537 #define CONFIG_SYS_I2C_LDI_ADDR         0x38
 538 #define CONFIG_SYS_I2C_DVI_ADDR         0x75
 539
 540 /*
 541  * RTC configuration
 542  */
 543 #define RTC
 544 #define CONFIG_RTC_DS1337               1
 545 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 546
 547 /*DVI encoder*/
 548 #define CONFIG_HDMI_ENCODER_I2C_ADDR  0x75
 549 #endif
 550
 551 /*
 552  * eSPI - Enhanced SPI
 553  */
 554 #define CONFIG_SPI_FLASH_BAR
 555 #define CONFIG_SF_DEFAULT_SPEED         10000000
 556 #define CONFIG_SF_DEFAULT_MODE          0
 557 #define CONFIG_ENV_SPI_BUS              0
 558 #define CONFIG_ENV_SPI_CS               0
 559 #define CONFIG_ENV_SPI_MAX_HZ           10000000
 560 #define CONFIG_ENV_SPI_MODE             0
 561
 562 /*
 563  * General PCI
 564  * Memory space is mapped 1-1, but I/O space must start from 0.
 565  */
 566
 567 #ifdef CONFIG_PCI
 568 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 569 #ifdef CONFIG_PCIE1
 570 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 571 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 572 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 573 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000      /* 256M */
 574 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 575 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 576 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 577 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 578 #endif
 579
 580 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 581 #ifdef CONFIG_PCIE2
 582 #define CONFIG_SYS_PCIE2_MEM_VIRT       0x90000000
 583 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 584 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc10000000ull
 585 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000      /* 256M */
 586 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 587 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 588 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 589 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 590 #endif
 591
 592 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 593 #ifdef CONFIG_PCIE3
 594 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xa0000000
 595 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 596 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc20000000ull
 597 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x10000000      /* 256M */
 598 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 599 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 600 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 601 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 602 #endif
 603
 604 /* controller 4, Base address 203000 */
 605 #ifdef CONFIG_PCIE4
 606 #define CONFIG_SYS_PCIE4_MEM_VIRT       0xb0000000
 607 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 608 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc30000000ull
 609 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x10000000      /* 256M */
 610 #define CONFIG_SYS_PCIE4_IO_VIRT        0xf8030000
 611 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 612 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 613 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 614 #endif
 615
 616 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 617
 618 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 619 #define CONFIG_DOS_PARTITION
 620 #endif  /* CONFIG_PCI */
 621
 622 /* SATA */
 623 #define CONFIG_FSL_SATA_V2
 624 #ifdef CONFIG_FSL_SATA_V2
 625 #define CONFIG_LIBATA
 626 #define CONFIG_FSL_SATA
 627
 628 #define CONFIG_SYS_SATA_MAX_DEVICE      1
 629 #define CONFIG_SATA1
 630 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 631 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 632
 633 #define CONFIG_LBA48
 634 #define CONFIG_CMD_SATA
 635 #define CONFIG_DOS_PARTITION
 636 #endif
 637
 638 /*
 639 * USB
 640 */
 641 #define CONFIG_HAS_FSL_DR_USB
 642
 643 #ifdef CONFIG_HAS_FSL_DR_USB
 644 #define CONFIG_USB_EHCI
 645
 646 #ifdef CONFIG_USB_EHCI
 647 #define CONFIG_USB_STORAGE
 648 #define CONFIG_USB_EHCI_FSL
 649 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 650 #endif
 651 #endif
 652
 653 #define CONFIG_MMC
 654
 655 #ifdef CONFIG_MMC
 656 #define CONFIG_FSL_ESDHC
 657 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 658 #define CONFIG_GENERIC_MMC
 659 #define CONFIG_DOS_PARTITION
 660 #endif
 661
 662 /* Qman/Bman */
 663 #ifndef CONFIG_NOBQFMAN
 664 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 665 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 666 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 667 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 668 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 669 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 670 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 671 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 672 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 673 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 674                                         CONFIG_SYS_BMAN_CENA_SIZE)
 675 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 676 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 677 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 678 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 679 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 680 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 681 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 682 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 683 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 684 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 685 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 686                                         CONFIG_SYS_QMAN_CENA_SIZE)
 687 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 688 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 689
 690 #define CONFIG_SYS_DPAA_FMAN
 691 #define CONFIG_SYS_DPAA_PME
 692
 693 #if defined(CONFIG_T104xRDB) || defined(CONFIG_T104XD4RDB)
 694 #define CONFIG_QE
 695 #define CONFIG_U_QE
 696 #endif
 697
 698 /* Default address of microcode for the Linux Fman driver */
 699 #if defined(CONFIG_SPIFLASH)
 700 /*
 701  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 702  * env, so we got 0x110000.
 703  */
 704 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 705 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 706 #elif defined(CONFIG_SDCARD)
 707 /*
 708  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 709  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 710  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
 711  */
 712 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 713 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820)
 714 #elif defined(CONFIG_NAND)
 715 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 716 #define CONFIG_SYS_FMAN_FW_ADDR (5 * CONFIG_SYS_NAND_BLOCK_SIZE)
 717 #else
 718 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 719 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 720 #endif
 721
 722 #if defined(CONFIG_T104xRDB) || defined(CONFIG_T104XD4RDB)
 723 #if defined(CONFIG_SPIFLASH)
 724 #define CONFIG_SYS_QE_FW_ADDR           0x130000
 725 #elif defined(CONFIG_SDCARD)
 726 #define CONFIG_SYS_QE_FW_ADDR           (512 * 0x920)
 727 #elif defined(CONFIG_NAND)
 728 #define CONFIG_SYS_QE_FW_ADDR           (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
 729 #else
 730 #define CONFIG_SYS_QE_FW_ADDR           0xEFF10000
 731 #endif
 732 #endif
 733
 734 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 735 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 736 #endif /* CONFIG_NOBQFMAN */
 737
 738 #ifdef CONFIG_SYS_DPAA_FMAN
 739 #define CONFIG_FMAN_ENET
 740 #define CONFIG_PHY_VITESSE
 741 #define CONFIG_PHY_REALTEK
 742 #endif
 743
 744 #ifdef CONFIG_FMAN_ENET
 745 #if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB)
 746 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x03
 747 #elif defined(CONFIG_T1040D4RDB)
 748 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x01
 749 #elif defined(CONFIG_T1042D4RDB)
 750 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x02
 751 #define CONFIG_SYS_SGMII2_PHY_ADDR             0x03
 752 #define CONFIG_SYS_SGMII3_PHY_ADDR             0x01
 753 #endif
 754
 755 #ifdef CONFIG_T104XD4RDB
 756 #define CONFIG_SYS_RGMII1_PHY_ADDR             0x04
 757 #define CONFIG_SYS_RGMII2_PHY_ADDR             0x05
 758 #else
 759 #define CONFIG_SYS_RGMII1_PHY_ADDR             0x01
 760 #define CONFIG_SYS_RGMII2_PHY_ADDR             0x02
 761 #endif
 762
 763 /* Enable VSC9953 L2 Switch driver on T1040 SoC */
 764 #if defined(CONFIG_T1040RDB) || defined(CONFIG_T1040D4RDB)
 765 #define CONFIG_VSC9953
 766 #define CONFIG_CMD_ETHSW
 767 #ifdef CONFIG_T1040RDB
 768 #define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR        0x04
 769 #define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR        0x08
 770 #else
 771 #define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR        0x08
 772 #define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR        0x0c
 773 #endif
 774 #endif
 775
 776 #define CONFIG_MII              /* MII PHY management */
 777 #define CONFIG_ETHPRIME         "FM1@DTSEC4"
 778 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 779 #endif
 780
 781 /*
 782  * Environment
 783  */
 784 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 785 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 786
 787 /*
 788  * Command line configuration.
 789  */
 790 #ifdef CONFIG_T1042RDB_PI
 791 #define CONFIG_CMD_DATE
 792 #endif
 793 #define CONFIG_CMD_ERRATA
 794 #define CONFIG_CMD_IRQ
 795 #define CONFIG_CMD_REGINFO
 796
 797 #ifdef CONFIG_PCI
 798 #define CONFIG_CMD_PCI
 799 #endif
 800
 801 /* Hash command with SHA acceleration supported in hardware */
 802 #ifdef CONFIG_FSL_CAAM
 803 #define CONFIG_CMD_HASH
 804 #define CONFIG_SHA_HW_ACCEL
 805 #endif
 806
 807 /*
 808  * Miscellaneous configurable options
 809  */
 810 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 811 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 812 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 813 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 814 #ifdef CONFIG_CMD_KGDB
 815 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 816 #else
 817 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 818 #endif
 819 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 820 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 821 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 822
 823 /*
 824  * For booting Linux, the board info and command line data
 825  * have to be in the first 64 MB of memory, since this is
 826  * the maximum mapped by the Linux kernel during initialization.
 827  */
 828 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 829 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 830
 831 #ifdef CONFIG_CMD_KGDB
 832 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 833 #endif
 834
 835 /*
 836  * Dynamic MTD Partition support with mtdparts
 837  */
 838 #ifndef CONFIG_SYS_NO_FLASH
 839 #define CONFIG_MTD_DEVICE
 840 #define CONFIG_MTD_PARTITIONS
 841 #define CONFIG_CMD_MTDPARTS
 842 #define CONFIG_FLASH_CFI_MTD
 843 #define MTDIDS_DEFAULT "nor0=fe8000000.nor,nand0=fff800000.flash," \
 844                         "spi0=spife110000.0"
 845 #define MTDPARTS_DEFAULT        "mtdparts=fe8000000.nor:1m(uboot),5m(kernel)," \
 846                                 "128k(dtb),96m(fs),-(user);"\
 847                                 "fff800000.flash:2m(uboot),9m(kernel),"\
 848                                 "128k(dtb),96m(fs),-(user);spife110000.0:" \
 849                                 "2m(uboot),9m(kernel),128k(dtb),-(user)"
 850 #endif
 851
 852 /*
 853  * Environment Configuration
 854  */
 855 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 856 #define CONFIG_BOOTFILE         "uImage"
 857 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 858
 859 /* default location for tftp and bootm */
 860 #define CONFIG_LOADADDR         1000000
 861
 862
 863 #define CONFIG_BAUDRATE 115200
 864
 865 #define __USB_PHY_TYPE  utmi
 866 #define RAMDISKFILE     "t104xrdb/ramdisk.uboot"
 867
 868 #ifdef CONFIG_T1040RDB
 869 #define FDTFILE         "t1040rdb/t1040rdb.dtb"
 870 #elif defined(CONFIG_T1042RDB_PI)
 871 #define FDTFILE         "t1042rdb_pi/t1042rdb_pi.dtb"
 872 #elif defined(CONFIG_T1042RDB)
 873 #define FDTFILE         "t1042rdb/t1042rdb.dtb"
 874 #elif defined(CONFIG_T1040D4RDB)
 875 #define FDTFILE         "t1042rdb/t1040d4rdb.dtb"
 876 #elif defined(CONFIG_T1042D4RDB)
 877 #define FDTFILE         "t1042rdb/t1042d4rdb.dtb"
 878 #endif
 879
 880 #ifdef CONFIG_FSL_DIU_FB
 881 #define DIU_ENVIRONMENT "video-mode=fslfb:1024x768-32@60,monitor=dvi"
 882 #else
 883 #define DIU_ENVIRONMENT
 884 #endif
 885
 886 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 887         "hwconfig=fsl_ddr:bank_intlv=cs0_cs1;"                  \
 888         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\
 889         "usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 890         "netdev=eth0\0"                                         \
 891         "video-mode=" __stringify(DIU_ENVIRONMENT) "\0"         \
 892         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 893         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 894         "tftpflash=tftpboot $loadaddr $uboot && "               \
 895         "protect off $ubootaddr +$filesize && "                 \
 896         "erase $ubootaddr +$filesize && "                       \
 897         "cp.b $loadaddr $ubootaddr $filesize && "               \
 898         "protect on $ubootaddr +$filesize && "                  \
 899         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 900         "consoledev=ttyS0\0"                                    \
 901         "ramdiskaddr=2000000\0"                                 \
 902         "ramdiskfile=" __stringify(RAMDISKFILE) "\0"            \
 903         "fdtaddr=1e00000\0"                                     \
 904         "fdtfile=" __stringify(FDTFILE) "\0"                    \
 905         "bdev=sda3\0"
 906
 907 #define CONFIG_LINUX                       \
 908         "setenv bootargs root=/dev/ram rw "            \
 909         "console=$consoledev,$baudrate $othbootargs;"  \
 910         "setenv ramdiskaddr 0x02000000;"               \
 911         "setenv fdtaddr 0x00c00000;"                   \
 912         "setenv loadaddr 0x1000000;"                   \
 913         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 914
 915 #define CONFIG_HDBOOT                                   \
 916         "setenv bootargs root=/dev/$bdev rw "           \
 917         "console=$consoledev,$baudrate $othbootargs;"   \
 918         "tftp $loadaddr $bootfile;"                     \
 919         "tftp $fdtaddr $fdtfile;"                       \
 920         "bootm $loadaddr - $fdtaddr"
 921
 922 #define CONFIG_NFSBOOTCOMMAND                   \
 923         "setenv bootargs root=/dev/nfs rw "     \
 924         "nfsroot=$serverip:$rootpath "          \
 925         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 926         "console=$consoledev,$baudrate $othbootargs;"   \
 927         "tftp $loadaddr $bootfile;"             \
 928         "tftp $fdtaddr $fdtfile;"               \
 929         "bootm $loadaddr - $fdtaddr"
 930
 931 #define CONFIG_RAMBOOTCOMMAND                           \
 932         "setenv bootargs root=/dev/ram rw "             \
 933         "console=$consoledev,$baudrate $othbootargs;"   \
 934         "tftp $ramdiskaddr $ramdiskfile;"               \
 935         "tftp $loadaddr $bootfile;"                     \
 936         "tftp $fdtaddr $fdtfile;"                       \
 937         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 938
 939 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 940
 941 #include <asm/fsl_secure_boot.h>
 942
 943 #endif  /* __CONFIG_H */