include/configs/T208xQDS.h

   1 /*
   2  * Copyright 2011-2013 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * T2080/T2081 QDS board configuration file
   9  */
  10
  11 #ifndef __T208xQDS_H
  12 #define __T208xQDS_H
  13
  14 #define CONFIG_ICS307_REFCLK_HZ 25000000  /* ICS307 ref clk freq */
  15 #if defined(CONFIG_ARCH_T2080)
  16 #define CONFIG_FSL_SATA_V2
  17 #define CONFIG_SYS_SRIO         /* Enable Serial RapidIO Support */
  18 #define CONFIG_SRIO1            /* SRIO port 1 */
  19 #define CONFIG_SRIO2            /* SRIO port 2 */
  20 #elif defined(CONFIG_ARCH_T2081)
  21 #endif
  22
  23 /* High Level Configuration Options */
  24 #define CONFIG_SYS_BOOK3E_HV    /* Category E.HV supported */
  25 #define CONFIG_MP               /* support multiple processors */
  26 #define CONFIG_ENABLE_36BIT_PHYS
  27
  28 #ifdef CONFIG_PHYS_64BIT
  29 #define CONFIG_ADDR_MAP 1
  30 #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */
  31 #endif
  32
  33 #define CONFIG_SYS_FSL_CPC      /* Corenet Platform Cache */
  34 #define CONFIG_SYS_NUM_CPC      CONFIG_SYS_NUM_DDR_CTLRS
  35 #define CONFIG_ENV_OVERWRITE
  36
  37 #ifdef CONFIG_RAMBOOT_PBL
  38 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t208xqds/t208x_pbi.cfg
  39
  40 #define CONFIG_SPL_FLUSH_IMAGE
  41 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  42 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
  43 #define CONFIG_SPL_PAD_TO               0x40000
  44 #define CONFIG_SPL_MAX_SIZE             0x28000
  45 #define RESET_VECTOR_OFFSET             0x27FFC
  46 #define BOOT_PAGE_OFFSET                0x27000
  47 #ifdef CONFIG_SPL_BUILD
  48 #define CONFIG_SPL_SKIP_RELOCATE
  49 #define CONFIG_SPL_COMMON_INIT_DDR
  50 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  51 #endif
  52
  53 #ifdef CONFIG_NAND
  54 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  55 #define CONFIG_SYS_NAND_U_BOOT_DST      0x00200000
  56 #define CONFIG_SYS_NAND_U_BOOT_START    0x00200000
  57 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
  58 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  59 #if defined(CONFIG_ARCH_T2080)
  60 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2080_nand_rcw.cfg
  61 #elif defined(CONFIG_ARCH_T2081)
  62 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2081_nand_rcw.cfg
  63 #endif
  64 #define CONFIG_SPL_NAND_BOOT
  65 #endif
  66
  67 #ifdef CONFIG_SPIFLASH
  68 #define CONFIG_RESET_VECTOR_ADDRESS             0x200FFC
  69 #define CONFIG_SPL_SPI_FLASH_MINIMAL
  70 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (768 << 10)
  71 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x00200000)
  72 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x00200000)
  73 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (256 << 10)
  74 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  75 #ifndef CONFIG_SPL_BUILD
  76 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  77 #endif
  78 #if defined(CONFIG_ARCH_T2080)
  79 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2080_spi_rcw.cfg
  80 #elif defined(CONFIG_ARCH_T2081)
  81 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2081_spi_rcw.cfg
  82 #endif
  83 #define CONFIG_SPL_SPI_BOOT
  84 #endif
  85
  86 #ifdef CONFIG_SDCARD
  87 #define CONFIG_RESET_VECTOR_ADDRESS             0x200FFC
  88 #define CONFIG_SPL_MMC_MINIMAL
  89 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
  90 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x00200000)
  91 #define CONFIG_SYS_MMC_U_BOOT_START     (0x00200000)
  92 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
  93 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  94 #ifndef CONFIG_SPL_BUILD
  95 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  96 #endif
  97 #if defined(CONFIG_ARCH_T2080)
  98 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2080_sd_rcw.cfg
  99 #elif defined(CONFIG_ARCH_T2081)
 100 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2081_sd_rcw.cfg
 101 #endif
 102 #define CONFIG_SPL_MMC_BOOT
 103 #endif
 104
 105 #endif /* CONFIG_RAMBOOT_PBL */
 106
 107 #define CONFIG_SRIO_PCIE_BOOT_MASTER
 108 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 109 /* Set 1M boot space */
 110 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
 111 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
 112                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
 113 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
 114 #endif
 115
 116 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 117 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
 118 #endif
 119
 120 /*
 121  * These can be toggled for performance analysis, otherwise use default.
 122  */
 123 #define CONFIG_SYS_CACHE_STASHING
 124 #define CONFIG_BTB              /* toggle branch predition */
 125 #define CONFIG_DDR_ECC
 126 #ifdef CONFIG_DDR_ECC
 127 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 128 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 129 #endif
 130
 131 #ifdef CONFIG_MTD_NOR_FLASH
 132 #define CONFIG_FLASH_CFI_DRIVER
 133 #define CONFIG_SYS_FLASH_CFI
 134 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 135 #endif
 136
 137 #if defined(CONFIG_SPIFLASH)
 138 #define CONFIG_SYS_EXTRA_ENV_RELOC
 139 #define CONFIG_ENV_SPI_BUS      0
 140 #define CONFIG_ENV_SPI_CS       0
 141 #define CONFIG_ENV_SPI_MAX_HZ   10000000
 142 #define CONFIG_ENV_SPI_MODE     0
 143 #define CONFIG_ENV_SIZE         0x2000     /* 8KB */
 144 #define CONFIG_ENV_OFFSET       0x100000   /* 1MB */
 145 #define CONFIG_ENV_SECT_SIZE    0x10000
 146 #elif defined(CONFIG_SDCARD)
 147 #define CONFIG_SYS_EXTRA_ENV_RELOC
 148 #define CONFIG_SYS_MMC_ENV_DEV  0
 149 #define CONFIG_ENV_SIZE         0x2000
 150 #define CONFIG_ENV_OFFSET       (512 * 0x800)
 151 #elif defined(CONFIG_NAND)
 152 #define CONFIG_SYS_EXTRA_ENV_RELOC
 153 #define CONFIG_ENV_SIZE         0x2000
 154 #define CONFIG_ENV_OFFSET       (10 * CONFIG_SYS_NAND_BLOCK_SIZE)
 155 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 156 #define CONFIG_ENV_ADDR         0xffe20000
 157 #define CONFIG_ENV_SIZE         0x2000
 158 #elif defined(CONFIG_ENV_IS_NOWHERE)
 159 #define CONFIG_ENV_SIZE         0x2000
 160 #else
 161 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 162 #define CONFIG_ENV_SIZE         0x2000
 163 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 164 #endif
 165
 166 #ifndef __ASSEMBLY__
 167 unsigned long get_board_sys_clk(void);
 168 unsigned long get_board_ddr_clk(void);
 169 #endif
 170
 171 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk()
 172 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk()
 173
 174 /*
 175  * Config the L3 Cache as L3 SRAM
 176  */
 177 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 178 #define CONFIG_SYS_L3_SIZE              (512 << 10)
 179 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
 180 #ifdef CONFIG_RAMBOOT_PBL
 181 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
 182 #endif
 183 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 184 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (50 << 10)
 185 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 186 #define CONFIG_SPL_RELOC_STACK_SIZE     (22 << 10)
 187
 188 #define CONFIG_SYS_DCSRBAR      0xf0000000
 189 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull
 190
 191 /* EEPROM */
 192 #define CONFIG_ID_EEPROM
 193 #define CONFIG_SYS_I2C_EEPROM_NXID
 194 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 195 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 196 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 197
 198 /*
 199  * DDR Setup
 200  */
 201 #define CONFIG_VERY_BIG_RAM
 202 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 203 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 204 #define CONFIG_DIMM_SLOTS_PER_CTLR      2
 205 #define CONFIG_CHIP_SELECTS_PER_CTRL    (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
 206 #define CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
 207 #define CONFIG_DDR_SPD
 208 #define CONFIG_FSL_DDR_INTERACTIVE
 209 #define CONFIG_SYS_SPD_BUS_NUM  0
 210 #define CONFIG_SYS_SDRAM_SIZE   2048    /* for fixed parameter use */
 211 #define SPD_EEPROM_ADDRESS1     0x51
 212 #define SPD_EEPROM_ADDRESS2     0x52
 213 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1
 214 #define CTRL_INTLV_PREFERED     cacheline
 215
 216 /*
 217  * IFC Definitions
 218  */
 219 #define CONFIG_SYS_FLASH_BASE           0xe0000000
 220 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 221 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 222 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 223                                 + 0x8000000) | \
 224                                 CSPR_PORT_SIZE_16 | \
 225                                 CSPR_MSEL_NOR | \
 226                                 CSPR_V)
 227 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 228 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 229                                 CSPR_PORT_SIZE_16 | \
 230                                 CSPR_MSEL_NOR | \
 231                                 CSPR_V)
 232 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 233 /* NOR Flash Timing Params */
 234 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 235
 236 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 237                                 FTIM0_NOR_TEADC(0x5) | \
 238                                 FTIM0_NOR_TEAHC(0x5))
 239 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 240                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 241                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 242 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 243                                 FTIM2_NOR_TCH(0x4) | \
 244                                 FTIM2_NOR_TWPH(0x0E) | \
 245                                 FTIM2_NOR_TWP(0x1c))
 246 #define CONFIG_SYS_NOR_FTIM3    0x0
 247
 248 #define CONFIG_SYS_FLASH_QUIET_TEST
 249 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 250
 251 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 252 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 253 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 254 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 255
 256 #define CONFIG_SYS_FLASH_EMPTY_INFO
 257 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 258                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 259
 260 #define CONFIG_FSL_QIXIS        /* use common QIXIS code */
 261 #define QIXIS_BASE                      0xffdf0000
 262 #define QIXIS_LBMAP_SWITCH              6
 263 #define QIXIS_LBMAP_MASK                0x0f
 264 #define QIXIS_LBMAP_SHIFT               0
 265 #define QIXIS_LBMAP_DFLTBANK            0x00
 266 #define QIXIS_LBMAP_ALTBANK             0x04
 267 #define QIXIS_LBMAP_NAND                0x09
 268 #define QIXIS_LBMAP_SD                  0x00
 269 #define QIXIS_RCW_SRC_NAND              0x104
 270 #define QIXIS_RCW_SRC_SD                0x040
 271 #define QIXIS_RST_CTL_RESET             0x83
 272 #define QIXIS_RST_FORCE_MEM             0x1
 273 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 274 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 275 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 276 #define QIXIS_BASE_PHYS         (0xf00000000ull | QIXIS_BASE)
 277
 278 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 279 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
 280                                 | CSPR_PORT_SIZE_8 \
 281                                 | CSPR_MSEL_GPCM \
 282                                 | CSPR_V)
 283 #define CONFIG_SYS_AMASK3       IFC_AMASK(4*1024)
 284 #define CONFIG_SYS_CSOR3        0x0
 285 /* QIXIS Timing parameters for IFC CS3 */
 286 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 287                                         FTIM0_GPCM_TEADC(0x0e) | \
 288                                         FTIM0_GPCM_TEAHC(0x0e))
 289 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0xff) | \
 290                                         FTIM1_GPCM_TRAD(0x3f))
 291 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 292                                         FTIM2_GPCM_TCH(0x8) | \
 293                                         FTIM2_GPCM_TWP(0x1f))
 294 #define CONFIG_SYS_CS3_FTIM3            0x0
 295
 296 /* NAND Flash on IFC */
 297 #define CONFIG_NAND_FSL_IFC
 298 #define CONFIG_SYS_NAND_BASE            0xff800000
 299 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 300
 301 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 302 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 303                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 304                                 | CSPR_MSEL_NAND         /* MSEL = NAND */ \
 305                                 | CSPR_V)
 306 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 307
 308 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 309                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 310                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */     \
 311                                 | CSOR_NAND_RAL_3       /* RAL = 2Byes */   \
 312                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */\
 313                                 | CSOR_NAND_SPRZ_64     /* Spare size = 64 */\
 314                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 315
 316 #define CONFIG_SYS_NAND_ONFI_DETECTION
 317
 318 /* ONFI NAND Flash mode0 Timing Params */
 319 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 320                                         FTIM0_NAND_TWP(0x18)    | \
 321                                         FTIM0_NAND_TWCHT(0x07)  | \
 322                                         FTIM0_NAND_TWH(0x0a))
 323 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 324                                         FTIM1_NAND_TWBE(0x39)   | \
 325                                         FTIM1_NAND_TRR(0x0e)    | \
 326                                         FTIM1_NAND_TRP(0x18))
 327 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f)  | \
 328                                         FTIM2_NAND_TREH(0x0a)   | \
 329                                         FTIM2_NAND_TWHRE(0x1e))
 330 #define CONFIG_SYS_NAND_FTIM3           0x0
 331
 332 #define CONFIG_SYS_NAND_DDR_LAW         11
 333 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 334 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 335 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 336
 337 #if defined(CONFIG_NAND)
 338 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 339 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 340 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 341 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 342 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 343 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 344 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 345 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 346 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 347 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR0_CSPR
 348 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 349 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 350 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 351 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 352 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 353 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 354 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 355 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR1_CSPR
 356 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 357 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 358 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 359 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 360 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 361 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 362 #else
 363 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 364 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 365 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 366 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 367 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 368 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 369 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 370 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 371 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 372 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR
 373 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 374 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 375 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 376 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 377 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 378 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 379 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 380 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 381 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 382 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 383 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 384 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 385 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 386 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 387 #endif
 388
 389 #if defined(CONFIG_RAMBOOT_PBL)
 390 #define CONFIG_SYS_RAMBOOT
 391 #endif
 392
 393 #ifdef CONFIG_SPL_BUILD
 394 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 395 #else
 396 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 397 #endif
 398
 399 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
 400 #define CONFIG_MISC_INIT_R
 401 #define CONFIG_HWCONFIG
 402
 403 /* define to use L1 as initial stack */
 404 #define CONFIG_L1_INIT_RAM
 405 #define CONFIG_SYS_INIT_RAM_LOCK
 406 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000 /* Initial L1 address */
 407 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 408 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 409 /* The assembler doesn't like typecast */
 410 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 411                         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 412                         CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 413 #define CONFIG_SYS_INIT_RAM_SIZE        0x00004000
 414 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 415                                                 GENERATED_GBL_DATA_SIZE)
 416 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 417 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 418 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 419
 420 /*
 421  * Serial Port
 422  */
 423 #define CONFIG_CONS_INDEX               1
 424 #define CONFIG_SYS_NS16550_SERIAL
 425 #define CONFIG_SYS_NS16550_REG_SIZE     1
 426 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 427 #define CONFIG_SYS_BAUDRATE_TABLE       \
 428         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 429 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 430 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 431 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 432 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 433
 434 /*
 435  * I2C
 436  */
 437 #define CONFIG_SYS_I2C
 438 #define CONFIG_SYS_I2C_FSL
 439 #define CONFIG_SYS_FSL_I2C_SLAVE   0x7F
 440 #define CONFIG_SYS_FSL_I2C2_SLAVE  0x7F
 441 #define CONFIG_SYS_FSL_I2C3_SLAVE  0x7F
 442 #define CONFIG_SYS_FSL_I2C4_SLAVE  0x7F
 443 #define CONFIG_SYS_FSL_I2C_OFFSET  0x118000
 444 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100
 445 #define CONFIG_SYS_FSL_I2C3_OFFSET 0x119000
 446 #define CONFIG_SYS_FSL_I2C4_OFFSET 0x119100
 447 #define CONFIG_SYS_FSL_I2C_SPEED   100000
 448 #define CONFIG_SYS_FSL_I2C2_SPEED  100000
 449 #define CONFIG_SYS_FSL_I2C3_SPEED  100000
 450 #define CONFIG_SYS_FSL_I2C4_SPEED  100000
 451 #define I2C_MUX_PCA_ADDR_PRI    0x77 /* I2C bus multiplexer,primary */
 452 #define I2C_MUX_PCA_ADDR_SEC1   0x75 /* I2C bus multiplexer,secondary 1 */
 453 #define I2C_MUX_PCA_ADDR_SEC2   0x76 /* I2C bus multiplexer,secondary 2 */
 454 #define I2C_MUX_CH_DEFAULT      0x8
 455
 456 #define I2C_MUX_CH_VOL_MONITOR 0xa
 457
 458 /* Voltage monitor on channel 2*/
 459 #define I2C_VOL_MONITOR_ADDR           0x40
 460 #define I2C_VOL_MONITOR_BUS_V_OFFSET   0x2
 461 #define I2C_VOL_MONITOR_BUS_V_OVF      0x1
 462 #define I2C_VOL_MONITOR_BUS_V_SHIFT    3
 463
 464 #define CONFIG_VID_FLS_ENV              "t208xqds_vdd_mv"
 465 #ifndef CONFIG_SPL_BUILD
 466 #define CONFIG_VID
 467 #endif
 468 #define CONFIG_VOL_MONITOR_IR36021_SET
 469 #define CONFIG_VOL_MONITOR_IR36021_READ
 470 /* The lowest and highest voltage allowed for T208xQDS */
 471 #define VDD_MV_MIN                      819
 472 #define VDD_MV_MAX                      1212
 473
 474 /*
 475  * RapidIO
 476  */
 477 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xa0000000
 478 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc20000000ull
 479 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x10000000 /* 256M */
 480 #define CONFIG_SYS_SRIO2_MEM_VIRT       0xb0000000
 481 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xc30000000ull
 482 #define CONFIG_SYS_SRIO2_MEM_SIZE       0x10000000 /* 256M */
 483 /*
 484  * for slave u-boot IMAGE instored in master memory space,
 485  * PHYS must be aligned based on the SIZE
 486  */
 487 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
 488 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
 489 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE     0x100000 /* 1M */
 490 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
 491 /*
 492  * for slave UCODE and ENV instored in master memory space,
 493  * PHYS must be aligned based on the SIZE
 494  */
 495 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
 496 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
 497 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE    0x40000 /* 256K */
 498
 499 /* slave core release by master*/
 500 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
 501 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
 502
 503 /*
 504  * SRIO_PCIE_BOOT - SLAVE
 505  */
 506 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 507 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 508 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 509                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 510 #endif
 511
 512 /*
 513  * eSPI - Enhanced SPI
 514  */
 515 #ifdef CONFIG_SPI_FLASH
 516 #ifndef CONFIG_SPL_BUILD
 517 #endif
 518
 519 #define CONFIG_SPI_FLASH_BAR
 520 #define CONFIG_SF_DEFAULT_SPEED  10000000
 521 #define CONFIG_SF_DEFAULT_MODE    0
 522 #endif
 523
 524 /*
 525  * General PCI
 526  * Memory space is mapped 1-1, but I/O space must start from 0.
 527  */
 528 #define CONFIG_PCIE1            /* PCIE controller 1 */
 529 #define CONFIG_PCIE2            /* PCIE controller 2 */
 530 #define CONFIG_PCIE3            /* PCIE controller 3 */
 531 #define CONFIG_PCIE4            /* PCIE controller 4 */
 532 #define CONFIG_FSL_PCIE_RESET   /* pcie reset fix link width 2x-4x*/
 533 #define CONFIG_FSL_PCI_INIT     /* Use common FSL init code */
 534 #define CONFIG_SYS_PCI_64BIT    /* enable 64-bit PCI resources */
 535 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 536 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 537 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 538 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 539 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 540 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 541 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 542 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 543 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 544
 545 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 546 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 547 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 548 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 549 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000 /* 256M */
 550 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 551 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 552 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 553 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 554
 555 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 556 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xb0000000
 557 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 558 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc30000000ull
 559 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x10000000      /* 256M */
 560 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 561 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 562 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 563 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 564
 565 /* controller 4, Base address 203000 */
 566 #define CONFIG_SYS_PCIE4_MEM_VIRT       0xc0000000
 567 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 568 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc40000000ull
 569 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x10000000      /* 256M */
 570 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 571 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 572 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 573
 574 #ifdef CONFIG_PCI
 575 #define CONFIG_PCI_INDIRECT_BRIDGE
 576 #define CONFIG_PCI_SCAN_SHOW    /* show pci devices on startup */
 577 #endif
 578
 579 /* Qman/Bman */
 580 #ifndef CONFIG_NOBQFMAN
 581 #define CONFIG_SYS_BMAN_NUM_PORTALS     18
 582 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 583 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 584 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 585 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 586 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 587 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 588 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 589 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 590                                         CONFIG_SYS_BMAN_CENA_SIZE)
 591 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 592 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 593 #define CONFIG_SYS_QMAN_NUM_PORTALS     18
 594 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 595 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 596 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 597 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 598 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 599 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 600 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 601 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 602                                         CONFIG_SYS_QMAN_CENA_SIZE)
 603 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 604 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 605
 606 #define CONFIG_SYS_DPAA_FMAN
 607 #define CONFIG_SYS_DPAA_PME
 608 #define CONFIG_SYS_PMAN
 609 #define CONFIG_SYS_DPAA_DCE
 610 #define CONFIG_SYS_DPAA_RMAN            /* RMan */
 611 #define CONFIG_SYS_INTERLAKEN
 612
 613 /* Default address of microcode for the Linux Fman driver */
 614 #if defined(CONFIG_SPIFLASH)
 615 /*
 616  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 617  * env, so we got 0x110000.
 618  */
 619 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 620 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 621 #elif defined(CONFIG_SDCARD)
 622 /*
 623  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 624  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 625  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
 626  */
 627 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 628 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820)
 629 #elif defined(CONFIG_NAND)
 630 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 631 #define CONFIG_SYS_FMAN_FW_ADDR (11 * CONFIG_SYS_NAND_BLOCK_SIZE)
 632 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 633 /*
 634  * Slave has no ucode locally, it can fetch this from remote. When implementing
 635  * in two corenet boards, slave's ucode could be stored in master's memory
 636  * space, the address can be mapped from slave TLB->slave LAW->
 637  * slave SRIO or PCIE outbound window->master inbound window->
 638  * master LAW->the ucode address in master's memory space.
 639  */
 640 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 641 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000
 642 #else
 643 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 644 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000
 645 #endif
 646 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 647 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 648 #endif /* CONFIG_NOBQFMAN */
 649
 650 #ifdef CONFIG_SYS_DPAA_FMAN
 651 #define CONFIG_FMAN_ENET
 652 #define CONFIG_PHYLIB_10G
 653 #define CONFIG_PHY_VITESSE
 654 #define CONFIG_PHY_REALTEK
 655 #define CONFIG_PHY_TERANETICS
 656 #define RGMII_PHY1_ADDR 0x1
 657 #define RGMII_PHY2_ADDR 0x2
 658 #define FM1_10GEC1_PHY_ADDR       0x3
 659 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
 660 #define SGMII_CARD_PORT2_PHY_ADDR 0x1D
 661 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
 662 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F
 663 #endif
 664
 665 #ifdef CONFIG_FMAN_ENET
 666 #define CONFIG_MII              /* MII PHY management */
 667 #define CONFIG_ETHPRIME         "FM1@DTSEC3"
 668 #endif
 669
 670 /*
 671  * SATA
 672  */
 673 #ifdef CONFIG_FSL_SATA_V2
 674 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 675 #define CONFIG_SATA1
 676 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 677 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 678 #define CONFIG_SATA2
 679 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 680 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 681 #define CONFIG_LBA48
 682 #endif
 683
 684 /*
 685  * USB
 686  */
 687 #ifdef CONFIG_USB_EHCI_HCD
 688 #define CONFIG_USB_EHCI_FSL
 689 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 690 #define CONFIG_HAS_FSL_DR_USB
 691 #endif
 692
 693 /*
 694  * SDHC
 695  */
 696 #ifdef CONFIG_MMC
 697 #define CONFIG_FSL_ESDHC
 698 #define CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK
 699 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 700 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 701 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 702 #define CONFIG_FSL_ESDHC_ADAPTER_IDENT
 703 #endif
 704
 705 /*
 706  * Dynamic MTD Partition support with mtdparts
 707  */
 708 #ifdef CONFIG_MTD_NOR_FLASH
 709 #define CONFIG_MTD_DEVICE
 710 #define CONFIG_MTD_PARTITIONS
 711 #define CONFIG_FLASH_CFI_MTD
 712 #endif
 713
 714 /*
 715  * Environment
 716  */
 717 #define CONFIG_LOADS_ECHO       /* echo on for serial download */
 718 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 719
 720 /*
 721  * Miscellaneous configurable options
 722  */
 723 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 724 #define CONFIG_CMDLINE_EDITING          /* Command-line editing */
 725 #define CONFIG_AUTO_COMPLETE            /* add autocompletion support */
 726 #define CONFIG_SYS_LOAD_ADDR    0x2000000 /* default load address */
 727
 728 /*
 729  * For booting Linux, the board info and command line data
 730  * have to be in the first 64 MB of memory, since this is
 731  * the maximum mapped by the Linux kernel during initialization.
 732  */
 733 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 734 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 735
 736 #ifdef CONFIG_CMD_KGDB
 737 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 738 #define CONFIG_KGDB_SER_INDEX   2       /* which serial port to use */
 739 #endif
 740
 741 /*
 742  * Environment Configuration
 743  */
 744 #define CONFIG_ROOTPATH  "/opt/nfsroot"
 745 #define CONFIG_BOOTFILE  "uImage"
 746 #define CONFIG_UBOOTPATH "u-boot.bin"   /* U-Boot image on TFTP server */
 747
 748 /* default location for tftp and bootm */
 749 #define CONFIG_LOADADDR         1000000
 750 #define __USB_PHY_TYPE          utmi
 751
 752 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 753         "hwconfig=fsl_ddr:"                                     \
 754         "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) ","      \
 755         "bank_intlv=auto;"                                      \
 756         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 757         "netdev=eth0\0"                                         \
 758         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 759         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 760         "tftpflash=tftpboot $loadaddr $uboot && "               \
 761         "protect off $ubootaddr +$filesize && "                 \
 762         "erase $ubootaddr +$filesize && "                       \
 763         "cp.b $loadaddr $ubootaddr $filesize && "               \
 764         "protect on $ubootaddr +$filesize && "                  \
 765         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 766         "consoledev=ttyS0\0"                                    \
 767         "ramdiskaddr=2000000\0"                                 \
 768         "ramdiskfile=t2080qds/ramdisk.uboot\0"                  \
 769         "fdtaddr=1e00000\0"                                     \
 770         "fdtfile=t2080qds/t2080qds.dtb\0"                       \
 771         "bdev=sda3\0"
 772
 773 /*
 774  * For emulation this causes u-boot to jump to the start of the
 775  * proof point app code automatically
 776  */
 777 #define CONFIG_PROOF_POINTS                             \
 778         "setenv bootargs root=/dev/$bdev rw "           \
 779         "console=$consoledev,$baudrate $othbootargs;"   \
 780         "cpu 1 release 0x29000000 - - -;"               \
 781         "cpu 2 release 0x29000000 - - -;"               \
 782         "cpu 3 release 0x29000000 - - -;"               \
 783         "cpu 4 release 0x29000000 - - -;"               \
 784         "cpu 5 release 0x29000000 - - -;"               \
 785         "cpu 6 release 0x29000000 - - -;"               \
 786         "cpu 7 release 0x29000000 - - -;"               \
 787         "go 0x29000000"
 788
 789 #define CONFIG_HVBOOT                           \
 790         "setenv bootargs config-addr=0x60000000; "      \
 791         "bootm 0x01000000 - 0x00f00000"
 792
 793 #define CONFIG_ALU                              \
 794         "setenv bootargs root=/dev/$bdev rw "           \
 795         "console=$consoledev,$baudrate $othbootargs;"   \
 796         "cpu 1 release 0x01000000 - - -;"               \
 797         "cpu 2 release 0x01000000 - - -;"               \
 798         "cpu 3 release 0x01000000 - - -;"               \
 799         "cpu 4 release 0x01000000 - - -;"               \
 800         "cpu 5 release 0x01000000 - - -;"               \
 801         "cpu 6 release 0x01000000 - - -;"               \
 802         "cpu 7 release 0x01000000 - - -;"               \
 803         "go 0x01000000"
 804
 805 #define CONFIG_LINUX                            \
 806         "setenv bootargs root=/dev/ram rw "             \
 807         "console=$consoledev,$baudrate $othbootargs;"   \
 808         "setenv ramdiskaddr 0x02000000;"                \
 809         "setenv fdtaddr 0x00c00000;"                    \
 810         "setenv loadaddr 0x1000000;"                    \
 811         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 812
 813 #define CONFIG_HDBOOT                                   \
 814         "setenv bootargs root=/dev/$bdev rw "           \
 815         "console=$consoledev,$baudrate $othbootargs;"   \
 816         "tftp $loadaddr $bootfile;"                     \
 817         "tftp $fdtaddr $fdtfile;"                       \
 818         "bootm $loadaddr - $fdtaddr"
 819
 820 #define CONFIG_NFSBOOTCOMMAND                   \
 821         "setenv bootargs root=/dev/nfs rw "     \
 822         "nfsroot=$serverip:$rootpath "          \
 823         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 824         "console=$consoledev,$baudrate $othbootargs;"   \
 825         "tftp $loadaddr $bootfile;"             \
 826         "tftp $fdtaddr $fdtfile;"               \
 827         "bootm $loadaddr - $fdtaddr"
 828
 829 #define CONFIG_RAMBOOTCOMMAND                           \
 830         "setenv bootargs root=/dev/ram rw "             \
 831         "console=$consoledev,$baudrate $othbootargs;"   \
 832         "tftp $ramdiskaddr $ramdiskfile;"               \
 833         "tftp $loadaddr $bootfile;"                     \
 834         "tftp $fdtaddr $fdtfile;"                       \
 835         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 836
 837 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 838
 839 #include <asm/fsl_secure_boot.h>
 840
 841 #endif  /* __T208xQDS_H */