include/configs/T208xRDB.h

   1 /*
   2  * Copyright 2014 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * T2080 RDB/PCIe board configuration file
   9  */
  10
  11 #ifndef __T2080RDB_H
  12 #define __T2080RDB_H
  13
  14 #define CONFIG_SYS_GENERIC_BOARD
  15 #define CONFIG_DISPLAY_BOARDINFO
  16 #define CONFIG_T2080RDB
  17 #define CONFIG_ICS307_REFCLK_HZ 25000000  /* ICS307 ref clk freq */
  18 #define CONFIG_MMC
  19 #define CONFIG_SPI_FLASH
  20 #define CONFIG_USB_EHCI
  21 #define CONFIG_FSL_SATA_V2
  22
  23 /* High Level Configuration Options */
  24 #define CONFIG_PHYS_64BIT
  25 #define CONFIG_BOOKE
  26 #define CONFIG_E500             /* BOOKE e500 family */
  27 #define CONFIG_E500MC           /* BOOKE e500mc family */
  28 #define CONFIG_SYS_BOOK3E_HV    /* Category E.HV supported */
  29 #define CONFIG_MP               /* support multiple processors */
  30 #define CONFIG_ENABLE_36BIT_PHYS
  31
  32 #ifdef CONFIG_PHYS_64BIT
  33 #define CONFIG_ADDR_MAP 1
  34 #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */
  35 #endif
  36
  37 #define CONFIG_SYS_FSL_CPC      /* Corenet Platform Cache */
  38 #define CONFIG_SYS_NUM_CPC      CONFIG_NUM_DDR_CONTROLLERS
  39 #define CONFIG_FSL_IFC          /* Enable IFC Support */
  40 #define CONFIG_FSL_CAAM         /* Enable SEC/CAAM */
  41 #define CONFIG_FSL_LAW          /* Use common FSL init code */
  42 #define CONFIG_ENV_OVERWRITE
  43
  44 #ifdef CONFIG_RAMBOOT_PBL
  45 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t208xrdb/t2080_pbi.cfg
  46 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xrdb/t2080_rcw.cfg
  47
  48 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
  49 #define CONFIG_SPL_ENV_SUPPORT
  50 #define CONFIG_SPL_SERIAL_SUPPORT
  51 #define CONFIG_SPL_FLUSH_IMAGE
  52 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  53 #define CONFIG_SPL_LIBGENERIC_SUPPORT
  54 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  55 #define CONFIG_SPL_I2C_SUPPORT
  56 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT
  57 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  58 #define CONFIG_SYS_TEXT_BASE            0x00201000
  59 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
  60 #define CONFIG_SPL_PAD_TO               0x40000
  61 #define CONFIG_SPL_MAX_SIZE             0x28000
  62 #define RESET_VECTOR_OFFSET             0x27FFC
  63 #define BOOT_PAGE_OFFSET                0x27000
  64 #ifdef CONFIG_SPL_BUILD
  65 #define CONFIG_SPL_SKIP_RELOCATE
  66 #define CONFIG_SPL_COMMON_INIT_DDR
  67 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  68 #define CONFIG_SYS_NO_FLASH
  69 #endif
  70
  71 #ifdef CONFIG_NAND
  72 #define CONFIG_SPL_NAND_SUPPORT
  73 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  74 #define CONFIG_SYS_NAND_U_BOOT_DST      0x00200000
  75 #define CONFIG_SYS_NAND_U_BOOT_START    0x00200000
  76 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
  77 #define CONFIG_SYS_LDSCRIPT  "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  78 #define CONFIG_SPL_NAND_BOOT
  79 #endif
  80
  81 #ifdef CONFIG_SPIFLASH
  82 #define        CONFIG_RESET_VECTOR_ADDRESS             0x200FFC
  83 #define CONFIG_SPL_SPI_SUPPORT
  84 #define CONFIG_SPL_SPI_FLASH_SUPPORT
  85 #define CONFIG_SPL_SPI_FLASH_MINIMAL
  86 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE       (768 << 10)
  87 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST                (0x00200000)
  88 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START      (0x00200000)
  89 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS       (256 << 10)
  90 #define CONFIG_SYS_LDSCRIPT    "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  91 #ifndef CONFIG_SPL_BUILD
  92 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  93 #endif
  94 #define CONFIG_SPL_SPI_BOOT
  95 #endif
  96
  97 #ifdef CONFIG_SDCARD
  98 #define        CONFIG_RESET_VECTOR_ADDRESS             0x200FFC
  99 #define CONFIG_SPL_MMC_SUPPORT
 100 #define CONFIG_SPL_MMC_MINIMAL
 101 #define CONFIG_SYS_MMC_U_BOOT_SIZE     (768 << 10)
 102 #define CONFIG_SYS_MMC_U_BOOT_DST      (0x00200000)
 103 #define CONFIG_SYS_MMC_U_BOOT_START    (0x00200000)
 104 #define CONFIG_SYS_MMC_U_BOOT_OFFS     (260 << 10)
 105 #define CONFIG_SYS_LDSCRIPT    "arch/powerpc/cpu/mpc85xx/u-boot.lds"
 106 #ifndef CONFIG_SPL_BUILD
 107 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 108 #endif
 109 #define CONFIG_SPL_MMC_BOOT
 110 #endif
 111
 112 #endif /* CONFIG_RAMBOOT_PBL */
 113
 114 #define CONFIG_SRIO_PCIE_BOOT_MASTER
 115 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 116 /* Set 1M boot space */
 117 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
 118 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
 119                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
 120 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
 121 #define CONFIG_SYS_NO_FLASH
 122 #endif
 123
 124 #ifndef CONFIG_SYS_TEXT_BASE
 125 #define CONFIG_SYS_TEXT_BASE    0xeff40000
 126 #endif
 127
 128 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 129 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
 130 #endif
 131
 132 /*
 133  * These can be toggled for performance analysis, otherwise use default.
 134  */
 135 #define CONFIG_SYS_CACHE_STASHING
 136 #define CONFIG_BTB              /* toggle branch predition */
 137 #define CONFIG_DDR_ECC
 138 #ifdef CONFIG_DDR_ECC
 139 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 140 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 141 #endif
 142
 143 #define CONFIG_CMD_MEMTEST
 144 #define CONFIG_SYS_MEMTEST_START        0x00200000 /* memtest works on */
 145 #define CONFIG_SYS_MEMTEST_END          0x00400000
 146 #define CONFIG_SYS_ALT_MEMTEST
 147
 148 #ifndef CONFIG_SYS_NO_FLASH
 149 #define CONFIG_FLASH_CFI_DRIVER
 150 #define CONFIG_SYS_FLASH_CFI
 151 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 152 #endif
 153
 154 #if defined(CONFIG_SPIFLASH)
 155 #define CONFIG_SYS_EXTRA_ENV_RELOC
 156 #define CONFIG_ENV_IS_IN_SPI_FLASH
 157 #define CONFIG_ENV_SPI_BUS      0
 158 #define CONFIG_ENV_SPI_CS       0
 159 #define CONFIG_ENV_SPI_MAX_HZ   10000000
 160 #define CONFIG_ENV_SPI_MODE     0
 161 #define CONFIG_ENV_SIZE         0x2000     /* 8KB */
 162 #define CONFIG_ENV_OFFSET       0x100000   /* 1MB */
 163 #define CONFIG_ENV_SECT_SIZE    0x10000
 164 #elif defined(CONFIG_SDCARD)
 165 #define CONFIG_SYS_EXTRA_ENV_RELOC
 166 #define CONFIG_ENV_IS_IN_MMC
 167 #define CONFIG_SYS_MMC_ENV_DEV  0
 168 #define CONFIG_ENV_SIZE         0x2000
 169 #define CONFIG_ENV_OFFSET       (512 * 0x800)
 170 #elif defined(CONFIG_NAND)
 171 #define CONFIG_SYS_EXTRA_ENV_RELOC
 172 #define CONFIG_ENV_IS_IN_NAND
 173 #define CONFIG_ENV_SIZE         0x2000
 174 #define CONFIG_ENV_OFFSET       (2 * CONFIG_SYS_NAND_BLOCK_SIZE)
 175 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 176 #define CONFIG_ENV_IS_IN_REMOTE
 177 #define CONFIG_ENV_ADDR         0xffe20000
 178 #define CONFIG_ENV_SIZE         0x2000
 179 #elif defined(CONFIG_ENV_IS_NOWHERE)
 180 #define CONFIG_ENV_SIZE         0x2000
 181 #else
 182 #define CONFIG_ENV_IS_IN_FLASH
 183 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 184 #define CONFIG_ENV_SIZE         0x2000
 185 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 186 #endif
 187
 188 #ifndef __ASSEMBLY__
 189 unsigned long get_board_sys_clk(void);
 190 unsigned long get_board_ddr_clk(void);
 191 #endif
 192
 193 #define CONFIG_SYS_CLK_FREQ     66660000
 194 #define CONFIG_DDR_CLK_FREQ     133330000
 195
 196 /*
 197  * Config the L3 Cache as L3 SRAM
 198  */
 199 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 200 #define CONFIG_SYS_L3_SIZE              (512 << 10)
 201 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
 202 #ifdef CONFIG_RAMBOOT_PBL
 203 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
 204 #endif
 205 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 206 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (50 << 10)
 207 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 208 #define CONFIG_SPL_RELOC_STACK_SIZE     (22 << 10)
 209
 210 #define CONFIG_SYS_DCSRBAR      0xf0000000
 211 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull
 212
 213 /* EEPROM */
 214 #define CONFIG_ID_EEPROM
 215 #define CONFIG_SYS_I2C_EEPROM_NXID
 216 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 217 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50
 218 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  2
 219
 220 /*
 221  * DDR Setup
 222  */
 223 #define CONFIG_VERY_BIG_RAM
 224 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 225 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 226 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 227 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 228 #define CONFIG_DDR_SPD
 229 #define CONFIG_SYS_FSL_DDR3
 230 #undef CONFIG_FSL_DDR_INTERACTIVE
 231 #define CONFIG_SYS_SPD_BUS_NUM  0
 232 #define CONFIG_SYS_SDRAM_SIZE   2048    /* for fixed parameter use */
 233 #define SPD_EEPROM_ADDRESS1     0x51
 234 #define SPD_EEPROM_ADDRESS2     0x52
 235 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1
 236 #define CTRL_INTLV_PREFERED     cacheline
 237
 238 /*
 239  * IFC Definitions
 240  */
 241 #define CONFIG_SYS_FLASH_BASE           0xe8000000
 242 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 243 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 244 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 245                                 CSPR_PORT_SIZE_16 | \
 246                                 CSPR_MSEL_NOR | \
 247                                 CSPR_V)
 248 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 249
 250 /* NOR Flash Timing Params */
 251 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 252
 253 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 254                                 FTIM0_NOR_TEADC(0x5) | \
 255                                 FTIM0_NOR_TEAHC(0x5))
 256 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 257                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 258                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 259 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 260                                 FTIM2_NOR_TCH(0x4) | \
 261                                 FTIM2_NOR_TWPH(0x0E) | \
 262                                 FTIM2_NOR_TWP(0x1c))
 263 #define CONFIG_SYS_NOR_FTIM3    0x0
 264
 265 #define CONFIG_SYS_FLASH_QUIET_TEST
 266 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 267
 268 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 269 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 270 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 271 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 272 #define CONFIG_SYS_FLASH_EMPTY_INFO
 273 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS }
 274
 275 /* CPLD on IFC */
 276 #define CONFIG_SYS_CPLD_BASE    0xffdf0000
 277 #define CONFIG_SYS_CPLD_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
 278 #define CONFIG_SYS_CSPR2_EXT    (0xf)
 279 #define CONFIG_SYS_CSPR2        (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE) \
 280                                 | CSPR_PORT_SIZE_8 \
 281                                 | CSPR_MSEL_GPCM \
 282                                 | CSPR_V)
 283 #define CONFIG_SYS_AMASK2       IFC_AMASK(64*1024)
 284 #define CONFIG_SYS_CSOR2        0x0
 285
 286 /* CPLD Timing parameters for IFC CS2 */
 287 #define CONFIG_SYS_CS2_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 288                                         FTIM0_GPCM_TEADC(0x0e) | \
 289                                         FTIM0_GPCM_TEAHC(0x0e))
 290 #define CONFIG_SYS_CS2_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 291                                         FTIM1_GPCM_TRAD(0x1f))
 292 #define CONFIG_SYS_CS2_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 293                                         FTIM2_GPCM_TCH(0x8) | \
 294                                         FTIM2_GPCM_TWP(0x1f))
 295 #define CONFIG_SYS_CS2_FTIM3            0x0
 296
 297 /* NAND Flash on IFC */
 298 #define CONFIG_NAND_FSL_IFC
 299 #define CONFIG_SYS_NAND_BASE            0xff800000
 300 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 301
 302 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 303 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 304                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 305                                 | CSPR_MSEL_NAND         /* MSEL = NAND */ \
 306                                 | CSPR_V)
 307 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 308
 309 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 310                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 311                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */     \
 312                                 | CSOR_NAND_RAL_3       /* RAL = 2Byes */   \
 313                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */\
 314                                 | CSOR_NAND_SPRZ_64     /* Spare size = 64 */\
 315                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 316
 317 #define CONFIG_SYS_NAND_ONFI_DETECTION
 318
 319 /* ONFI NAND Flash mode0 Timing Params */
 320 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 321                                         FTIM0_NAND_TWP(0x18)    | \
 322                                         FTIM0_NAND_TWCHT(0x07)  | \
 323                                         FTIM0_NAND_TWH(0x0a))
 324 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 325                                         FTIM1_NAND_TWBE(0x39)   | \
 326                                         FTIM1_NAND_TRR(0x0e)    | \
 327                                         FTIM1_NAND_TRP(0x18))
 328 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f)  | \
 329                                         FTIM2_NAND_TREH(0x0a)   | \
 330                                         FTIM2_NAND_TWHRE(0x1e))
 331 #define CONFIG_SYS_NAND_FTIM3           0x0
 332
 333 #define CONFIG_SYS_NAND_DDR_LAW         11
 334 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 335 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 336 #define CONFIG_CMD_NAND
 337 #define CONFIG_SYS_NAND_BLOCK_SIZE      (512 * 1024)
 338
 339 #if defined(CONFIG_NAND)
 340 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 341 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 342 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 343 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 344 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 345 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 346 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 347 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 348 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 349 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR0_CSPR
 350 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 351 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 352 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 353 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 354 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 355 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 356 #else
 357 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 358 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 359 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 360 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 361 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 362 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 363 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 364 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 365 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NAND_CSPR_EXT
 366 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 367 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 368 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 369 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 370 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 371 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 372 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 373 #endif
 374
 375 #if defined(CONFIG_RAMBOOT_PBL)
 376 #define CONFIG_SYS_RAMBOOT
 377 #endif
 378
 379 #ifdef CONFIG_SPL_BUILD
 380 #define CONFIG_SYS_MONITOR_BASE  CONFIG_SPL_TEXT_BASE
 381 #else
 382 #define CONFIG_SYS_MONITOR_BASE  CONFIG_SYS_TEXT_BASE /* start of monitor */
 383 #endif
 384
 385 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
 386 #define CONFIG_MISC_INIT_R
 387 #define CONFIG_HWCONFIG
 388
 389 /* define to use L1 as initial stack */
 390 #define CONFIG_L1_INIT_RAM
 391 #define CONFIG_SYS_INIT_RAM_LOCK
 392 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000 /* Initial L1 address */
 393 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 394 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe0ec000
 395 /* The assembler doesn't like typecast */
 396 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 397                         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 398                         CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 399 #define CONFIG_SYS_INIT_RAM_SIZE        0x00004000
 400 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 401                                                 GENERATED_GBL_DATA_SIZE)
 402 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 403 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 404 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 405
 406 /*
 407  * Serial Port
 408  */
 409 #define CONFIG_CONS_INDEX               1
 410 #define CONFIG_SYS_NS16550
 411 #define CONFIG_SYS_NS16550_SERIAL
 412 #define CONFIG_SYS_NS16550_REG_SIZE     1
 413 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 414 #define CONFIG_SYS_BAUDRATE_TABLE       \
 415         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 416 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 417 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 418 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 419 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 420
 421 /* Use the HUSH parser */
 422 #define CONFIG_SYS_HUSH_PARSER
 423 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 424
 425 /* pass open firmware flat tree */
 426 #define CONFIG_OF_LIBFDT
 427 #define CONFIG_OF_BOARD_SETUP
 428 #define CONFIG_OF_STDOUT_VIA_ALIAS
 429
 430 /* new uImage format support */
 431 #define CONFIG_FIT
 432 #define CONFIG_FIT_VERBOSE      /* enable fit_format_{error,warning}() */
 433
 434 /*
 435  * I2C
 436  */
 437 #define CONFIG_SYS_I2C
 438 #define CONFIG_SYS_I2C_FSL
 439 #define CONFIG_SYS_FSL_I2C_SLAVE   0x7F
 440 #define CONFIG_SYS_FSL_I2C2_SLAVE  0x7F
 441 #define CONFIG_SYS_FSL_I2C3_SLAVE  0x7F
 442 #define CONFIG_SYS_FSL_I2C4_SLAVE  0x7F
 443 #define CONFIG_SYS_FSL_I2C_OFFSET  0x118000
 444 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100
 445 #define CONFIG_SYS_FSL_I2C3_OFFSET 0x119000
 446 #define CONFIG_SYS_FSL_I2C4_OFFSET 0x119100
 447 #define CONFIG_SYS_FSL_I2C_SPEED   100000
 448 #define CONFIG_SYS_FSL_I2C2_SPEED  100000
 449 #define CONFIG_SYS_FSL_I2C3_SPEED  100000
 450 #define CONFIG_SYS_FSL_I2C4_SPEED  100000
 451 #define I2C_MUX_PCA_ADDR_PRI    0x77 /* I2C bus multiplexer,primary */
 452 #define I2C_MUX_PCA_ADDR_SEC1   0x75 /* I2C bus multiplexer,secondary 1 */
 453 #define I2C_MUX_PCA_ADDR_SEC2   0x76 /* I2C bus multiplexer,secondary 2 */
 454 #define I2C_MUX_CH_DEFAULT      0x8
 455
 456 #define I2C_MUX_CH_VOL_MONITOR  0xa
 457
 458 #define CONFIG_VID_FLS_ENV              "t208xrdb_vdd_mv"
 459 #ifndef CONFIG_SPL_BUILD
 460 #define CONFIG_VID
 461 #endif
 462 #define CONFIG_VOL_MONITOR_IR36021_SET
 463 #define CONFIG_VOL_MONITOR_IR36021_READ
 464 /* The lowest and highest voltage allowed for T208xRDB */
 465 #define VDD_MV_MIN                      819
 466 #define VDD_MV_MAX                      1212
 467
 468 /*
 469  * RapidIO
 470  */
 471 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xa0000000
 472 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc20000000ull
 473 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x10000000 /* 256M */
 474 #define CONFIG_SYS_SRIO2_MEM_VIRT       0xb0000000
 475 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xc30000000ull
 476 #define CONFIG_SYS_SRIO2_MEM_SIZE       0x10000000 /* 256M */
 477 /*
 478  * for slave u-boot IMAGE instored in master memory space,
 479  * PHYS must be aligned based on the SIZE
 480  */
 481 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
 482 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
 483 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE     0x100000 /* 1M */
 484 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
 485 /*
 486  * for slave UCODE and ENV instored in master memory space,
 487  * PHYS must be aligned based on the SIZE
 488  */
 489 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
 490 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
 491 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE    0x40000 /* 256K */
 492
 493 /* slave core release by master*/
 494 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
 495 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
 496
 497 /*
 498  * SRIO_PCIE_BOOT - SLAVE
 499  */
 500 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 501 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 502 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 503                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 504 #endif
 505
 506 /*
 507  * eSPI - Enhanced SPI
 508  */
 509 #ifdef CONFIG_SPI_FLASH
 510 #define CONFIG_FSL_ESPI
 511 #define CONFIG_SPI_FLASH_STMICRO
 512 #define CONFIG_SPI_FLASH_BAR
 513 #define CONFIG_CMD_SF
 514 #define CONFIG_SF_DEFAULT_SPEED  10000000
 515 #define CONFIG_SF_DEFAULT_MODE    0
 516 #endif
 517
 518 /*
 519  * General PCI
 520  * Memory space is mapped 1-1, but I/O space must start from 0.
 521  */
 522 #define CONFIG_PCI              /* Enable PCI/PCIE */
 523 #define CONFIG_PCIE1            /* PCIE controler 1 */
 524 #define CONFIG_PCIE2            /* PCIE controler 2 */
 525 #define CONFIG_PCIE3            /* PCIE controler 3 */
 526 #define CONFIG_PCIE4            /* PCIE controler 4 */
 527 #define CONFIG_FSL_PCI_INIT     /* Use common FSL init code */
 528 #define CONFIG_SYS_PCI_64BIT    /* enable 64-bit PCI resources */
 529 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 530 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 531 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 532 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 533 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 534 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 535 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 536 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 537 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 538
 539 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 540 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 541 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 542 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 543 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000 /* 256M */
 544 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 545 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 546 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 547 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 548
 549 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 550 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xb0000000
 551 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 552 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc30000000ull
 553 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x10000000      /* 256M */
 554 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 555 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 556 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 557 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 558
 559 /* controller 4, Base address 203000 */
 560 #define CONFIG_SYS_PCIE4_MEM_VIRT       0xc0000000
 561 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 562 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc40000000ull
 563 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x10000000      /* 256M */
 564 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 565 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 566 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 567
 568 #ifdef CONFIG_PCI
 569 #define CONFIG_PCI_INDIRECT_BRIDGE
 570 #define CONFIG_FSL_PCIE_RESET           /* need PCIe reset errata LSZ ADD */
 571 #define CONFIG_NET_MULTI
 572 #define CONFIG_E1000
 573 #define CONFIG_PCI_PNP          /* do pci plug-and-play */
 574 #define CONFIG_PCI_SCAN_SHOW    /* show pci devices on startup */
 575 #define CONFIG_DOS_PARTITION
 576 #endif
 577
 578 /* Qman/Bman */
 579 #ifndef CONFIG_NOBQFMAN
 580 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 581 #define CONFIG_SYS_BMAN_NUM_PORTALS     18
 582 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 583 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 584 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 585 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 586 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 587 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 588 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 589 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 590                                         CONFIG_SYS_BMAN_CENA_SIZE)
 591 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 592 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 593 #define CONFIG_SYS_QMAN_NUM_PORTALS     18
 594 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 595 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 596 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 597 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 598 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 599 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 600 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 601 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 602                                         CONFIG_SYS_QMAN_CENA_SIZE)
 603 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 604 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 605
 606 #define CONFIG_SYS_DPAA_FMAN
 607 #define CONFIG_SYS_DPAA_PME
 608 #define CONFIG_SYS_PMAN
 609 #define CONFIG_SYS_DPAA_DCE
 610 #define CONFIG_SYS_DPAA_RMAN            /* RMan */
 611 #define CONFIG_SYS_INTERLAKEN
 612
 613 /* Default address of microcode for the Linux Fman driver */
 614 #if defined(CONFIG_SPIFLASH)
 615 /*
 616  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 617  * env, so we got 0x110000.
 618  */
 619 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 620 #define CONFIG_SYS_CORTINA_FW_IN_SPIFLASH
 621 #define CONFIG_SYS_FMAN_FW_ADDR         0x110000
 622 #define CONFIG_CORTINA_FW_ADDR          0x120000
 623
 624 #elif defined(CONFIG_SDCARD)
 625 /*
 626  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 627  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 628  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
 629  */
 630 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 631 #define CONFIG_SYS_CORTINA_FW_IN_MMC
 632 #define CONFIG_SYS_FMAN_FW_ADDR         (512 * 0x820)
 633 #define CONFIG_CORTINA_FW_ADDR          (512 * 0x8a0)
 634
 635 #elif defined(CONFIG_NAND)
 636 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 637 #define CONFIG_SYS_CORTINA_FW_IN_NAND
 638 #define CONFIG_SYS_FMAN_FW_ADDR         (3 * CONFIG_SYS_NAND_BLOCK_SIZE)
 639 #define CONFIG_CORTINA_FW_ADDR          (4 * CONFIG_SYS_NAND_BLOCK_SIZE)
 640 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 641 /*
 642  * Slave has no ucode locally, it can fetch this from remote. When implementing
 643  * in two corenet boards, slave's ucode could be stored in master's memory
 644  * space, the address can be mapped from slave TLB->slave LAW->
 645  * slave SRIO or PCIE outbound window->master inbound window->
 646  * master LAW->the ucode address in master's memory space.
 647  */
 648 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 649 #define CONFIG_SYS_CORTINA_FW_IN_REMOTE
 650 #define CONFIG_SYS_FMAN_FW_ADDR         0xFFE00000
 651 #define CONFIG_CORTINA_FW_ADDR          0xFFE10000
 652 #else
 653 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 654 #define CONFIG_SYS_CORTINA_FW_IN_NOR
 655 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 656 #define CONFIG_CORTINA_FW_ADDR          0xEFE00000
 657 #endif
 658 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 659 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 660 #endif /* CONFIG_NOBQFMAN */
 661
 662 #ifdef CONFIG_SYS_DPAA_FMAN
 663 #define CONFIG_FMAN_ENET
 664 #define CONFIG_PHYLIB_10G
 665 #define CONFIG_PHY_AQUANTIA
 666 #define CONFIG_PHY_CORTINA
 667 #define CONFIG_PHY_REALTEK
 668 #define CONFIG_CORTINA_FW_LENGTH        0x40000
 669 #define RGMII_PHY1_ADDR         0x01  /* RealTek RTL8211E */
 670 #define RGMII_PHY2_ADDR         0x02
 671 #define CORTINA_PHY_ADDR1       0x0c  /* Cortina CS4315 */
 672 #define CORTINA_PHY_ADDR2       0x0d
 673 #define FM1_10GEC3_PHY_ADDR     0x00  /* Aquantia AQ1202 10G Base-T */
 674 #define FM1_10GEC4_PHY_ADDR     0x01
 675 #endif
 676
 677
 678 #ifdef CONFIG_FMAN_ENET
 679 #define CONFIG_MII              /* MII PHY management */
 680 #define CONFIG_ETHPRIME         "FM1@DTSEC3"
 681 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 682 #endif
 683
 684 /*
 685  * SATA
 686  */
 687 #ifdef CONFIG_FSL_SATA_V2
 688 #define CONFIG_LIBATA
 689 #define CONFIG_FSL_SATA
 690 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 691 #define CONFIG_SATA1
 692 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 693 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 694 #define CONFIG_SATA2
 695 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 696 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 697 #define CONFIG_LBA48
 698 #define CONFIG_CMD_SATA
 699 #define CONFIG_DOS_PARTITION
 700 #define CONFIG_CMD_EXT2
 701 #endif
 702
 703 /*
 704  * USB
 705  */
 706 #ifdef CONFIG_USB_EHCI
 707 #define CONFIG_CMD_USB
 708 #define CONFIG_USB_STORAGE
 709 #define CONFIG_USB_EHCI_FSL
 710 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 711 #define CONFIG_CMD_EXT2
 712 #define CONFIG_HAS_FSL_DR_USB
 713 #endif
 714
 715 /*
 716  * SDHC
 717  */
 718 #ifdef CONFIG_MMC
 719 #define CONFIG_CMD_MMC
 720 #define CONFIG_FSL_ESDHC
 721 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 722 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 723 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 724 #define CONFIG_GENERIC_MMC
 725 #define CONFIG_CMD_EXT2
 726 #define CONFIG_CMD_FAT
 727 #define CONFIG_DOS_PARTITION
 728 #endif
 729
 730 /*
 731  * Dynamic MTD Partition support with mtdparts
 732  */
 733 #ifndef CONFIG_SYS_NO_FLASH
 734 #define CONFIG_MTD_DEVICE
 735 #define CONFIG_MTD_PARTITIONS
 736 #define CONFIG_CMD_MTDPARTS
 737 #define CONFIG_FLASH_CFI_MTD
 738 #define MTDIDS_DEFAULT "nor0=fe8000000.nor,nand0=fff800000.flash," \
 739                         "spi0=spife110000.1"
 740 #define MTDPARTS_DEFAULT "mtdparts=fe8000000.nor:1m(uboot),5m(kernel)," \
 741                         "128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot)," \
 742                         "5m(kernel),128k(dtb),96m(fs),-(user);spife110000.1:" \
 743                         "1m(uboot),5m(kernel),128k(dtb),-(user)"
 744 #endif
 745
 746 /*
 747  * Environment
 748  */
 749
 750 /*
 751  * Command line configuration.
 752  */
 753 #include <config_cmd_default.h>
 754
 755 #define CONFIG_CMD_DHCP
 756 #define CONFIG_CMD_ELF
 757 #define CONFIG_CMD_ERRATA
 758 #define CONFIG_CMD_MII
 759 #define CONFIG_CMD_I2C
 760 #define CONFIG_CMD_PING
 761 #define CONFIG_CMD_ECHO
 762 #define CONFIG_CMD_SETEXPR
 763 #define CONFIG_CMD_REGINFO
 764 #define CONFIG_CMD_BDI
 765
 766 #ifdef CONFIG_PCI
 767 #define CONFIG_CMD_PCI
 768 #define CONFIG_CMD_NET
 769 #endif
 770
 771 /* Hash command with SHA acceleration supported in hardware */
 772 #ifdef CONFIG_FSL_CAAM
 773 #define CONFIG_CMD_HASH
 774 #define CONFIG_SHA_HW_ACCEL
 775 #endif
 776
 777 /*
 778  * Miscellaneous configurable options
 779  */
 780 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 781 #define CONFIG_CMDLINE_EDITING          /* Command-line editing */
 782 #define CONFIG_AUTO_COMPLETE            /* add autocompletion support */
 783 #define CONFIG_SYS_LOAD_ADDR    0x2000000 /* default load address */
 784 #ifdef CONFIG_CMD_KGDB
 785 #define CONFIG_SYS_CBSIZE       1024      /* Console I/O Buffer Size */
 786 #else
 787 #define CONFIG_SYS_CBSIZE       256       /* Console I/O Buffer Size */
 788 #endif
 789 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 790 #define CONFIG_SYS_MAXARGS      16      /* max number of command args */
 791 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 792
 793 /*
 794  * For booting Linux, the board info and command line data
 795  * have to be in the first 64 MB of memory, since this is
 796  * the maximum mapped by the Linux kernel during initialization.
 797  */
 798 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 799 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 800
 801 #ifdef CONFIG_CMD_KGDB
 802 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 803 #define CONFIG_KGDB_SER_INDEX   2       /* which serial port to use */
 804 #endif
 805
 806 /*
 807  * Environment Configuration
 808  */
 809 #define CONFIG_ROOTPATH  "/opt/nfsroot"
 810 #define CONFIG_BOOTFILE  "uImage"
 811 #define CONFIG_UBOOTPATH "u-boot.bin"   /* U-Boot image on TFTP server */
 812
 813 /* default location for tftp and bootm */
 814 #define CONFIG_LOADADDR         1000000
 815 #define CONFIG_BAUDRATE         115200
 816 #define CONFIG_BOOTDELAY        10      /* -1 disables auto-boot */
 817 #define __USB_PHY_TYPE          utmi
 818
 819 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 820         "hwconfig=fsl_ddr:"                                     \
 821         "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) ","      \
 822         "bank_intlv=auto;"                                      \
 823         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 824         "netdev=eth0\0"                                         \
 825         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 826         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 827         "tftpflash=tftpboot $loadaddr $uboot && "               \
 828         "protect off $ubootaddr +$filesize && "                 \
 829         "erase $ubootaddr +$filesize && "                       \
 830         "cp.b $loadaddr $ubootaddr $filesize && "               \
 831         "protect on $ubootaddr +$filesize && "                  \
 832         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 833         "consoledev=ttyS0\0"                                    \
 834         "ramdiskaddr=2000000\0"                                 \
 835         "ramdiskfile=t2080rdb/ramdisk.uboot\0"                  \
 836         "fdtaddr=c00000\0"                                      \
 837         "fdtfile=t2080rdb/t2080rdb.dtb\0"                       \
 838         "bdev=sda3\0"
 839
 840 /*
 841  * For emulation this causes u-boot to jump to the start of the
 842  * proof point app code automatically
 843  */
 844 #define CONFIG_PROOF_POINTS                             \
 845         "setenv bootargs root=/dev/$bdev rw "           \
 846         "console=$consoledev,$baudrate $othbootargs;"   \
 847         "cpu 1 release 0x29000000 - - -;"               \
 848         "cpu 2 release 0x29000000 - - -;"               \
 849         "cpu 3 release 0x29000000 - - -;"               \
 850         "cpu 4 release 0x29000000 - - -;"               \
 851         "cpu 5 release 0x29000000 - - -;"               \
 852         "cpu 6 release 0x29000000 - - -;"               \
 853         "cpu 7 release 0x29000000 - - -;"               \
 854         "go 0x29000000"
 855
 856 #define CONFIG_HVBOOT                           \
 857         "setenv bootargs config-addr=0x60000000; "      \
 858         "bootm 0x01000000 - 0x00f00000"
 859
 860 #define CONFIG_ALU                              \
 861         "setenv bootargs root=/dev/$bdev rw "           \
 862         "console=$consoledev,$baudrate $othbootargs;"   \
 863         "cpu 1 release 0x01000000 - - -;"               \
 864         "cpu 2 release 0x01000000 - - -;"               \
 865         "cpu 3 release 0x01000000 - - -;"               \
 866         "cpu 4 release 0x01000000 - - -;"               \
 867         "cpu 5 release 0x01000000 - - -;"               \
 868         "cpu 6 release 0x01000000 - - -;"               \
 869         "cpu 7 release 0x01000000 - - -;"               \
 870         "go 0x01000000"
 871
 872 #define CONFIG_LINUX                            \
 873         "setenv bootargs root=/dev/ram rw "             \
 874         "console=$consoledev,$baudrate $othbootargs;"   \
 875         "setenv ramdiskaddr 0x02000000;"                \
 876         "setenv fdtaddr 0x00c00000;"                    \
 877         "setenv loadaddr 0x1000000;"                    \
 878         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 879
 880 #define CONFIG_HDBOOT                                   \
 881         "setenv bootargs root=/dev/$bdev rw "           \
 882         "console=$consoledev,$baudrate $othbootargs;"   \
 883         "tftp $loadaddr $bootfile;"                     \
 884         "tftp $fdtaddr $fdtfile;"                       \
 885         "bootm $loadaddr - $fdtaddr"
 886
 887 #define CONFIG_NFSBOOTCOMMAND                   \
 888         "setenv bootargs root=/dev/nfs rw "     \
 889         "nfsroot=$serverip:$rootpath "          \
 890         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 891         "console=$consoledev,$baudrate $othbootargs;"   \
 892         "tftp $loadaddr $bootfile;"             \
 893         "tftp $fdtaddr $fdtfile;"               \
 894         "bootm $loadaddr - $fdtaddr"
 895
 896 #define CONFIG_RAMBOOTCOMMAND                           \
 897         "setenv bootargs root=/dev/ram rw "             \
 898         "console=$consoledev,$baudrate $othbootargs;"   \
 899         "tftp $ramdiskaddr $ramdiskfile;"               \
 900         "tftp $loadaddr $bootfile;"                     \
 901         "tftp $fdtaddr $fdtfile;"                       \
 902         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 903
 904 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 905
 906 #ifdef CONFIG_SECURE_BOOT
 907 #include <asm/fsl_secure_boot.h>
 908 #define CONFIG_CMD_BLOB
 909 #undef CONFIG_CMD_USB
 910 #endif
 911
 912 #endif  /* __T2080RDB_H */