include/configs/T208xRDB.h

   1 /*
   2  * Copyright 2014 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * T2080 RDB/PCIe board configuration file
   9  */
  10
  11 #ifndef __T2080RDB_H
  12 #define __T2080RDB_H
  13
  14 #define CONFIG_T2080RDB
  15 #define CONFIG_ICS307_REFCLK_HZ 25000000  /* ICS307 ref clk freq */
  16 #define CONFIG_MMC
  17 #define CONFIG_SPI_FLASH
  18 #define CONFIG_USB_EHCI
  19 #define CONFIG_FSL_SATA_V2
  20
  21 /* High Level Configuration Options */
  22 #define CONFIG_PHYS_64BIT
  23 #define CONFIG_BOOKE
  24 #define CONFIG_E500             /* BOOKE e500 family */
  25 #define CONFIG_E500MC           /* BOOKE e500mc family */
  26 #define CONFIG_SYS_BOOK3E_HV    /* Category E.HV supported */
  27 #define CONFIG_MP               /* support multiple processors */
  28 #define CONFIG_ENABLE_36BIT_PHYS
  29
  30 #ifdef CONFIG_PHYS_64BIT
  31 #define CONFIG_ADDR_MAP 1
  32 #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */
  33 #endif
  34
  35 #define CONFIG_SYS_FSL_CPC      /* Corenet Platform Cache */
  36 #define CONFIG_SYS_NUM_CPC      CONFIG_NUM_DDR_CONTROLLERS
  37 #define CONFIG_FSL_IFC          /* Enable IFC Support */
  38 #define CONFIG_FSL_LAW          /* Use common FSL init code */
  39 #define CONFIG_ENV_OVERWRITE
  40
  41 #ifdef CONFIG_RAMBOOT_PBL
  42 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t208xrdb/t2080_pbi.cfg
  43 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xrdb/t2080_rcw.cfg
  44
  45 #define CONFIG_SPL
  46 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
  47 #define CONFIG_SPL_ENV_SUPPORT
  48 #define CONFIG_SPL_SERIAL_SUPPORT
  49 #define CONFIG_SPL_FLUSH_IMAGE
  50 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  51 #define CONFIG_SPL_LIBGENERIC_SUPPORT
  52 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  53 #define CONFIG_SPL_I2C_SUPPORT
  54 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT
  55 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  56 #define CONFIG_SYS_TEXT_BASE            0x00201000
  57 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
  58 #define CONFIG_SPL_PAD_TO               0x40000
  59 #define CONFIG_SPL_MAX_SIZE             0x28000
  60 #define RESET_VECTOR_OFFSET             0x27FFC
  61 #define BOOT_PAGE_OFFSET                0x27000
  62 #ifdef CONFIG_SPL_BUILD
  63 #define CONFIG_SPL_SKIP_RELOCATE
  64 #define CONFIG_SPL_COMMON_INIT_DDR
  65 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  66 #define CONFIG_SYS_NO_FLASH
  67 #endif
  68
  69 #ifdef CONFIG_NAND
  70 #define CONFIG_SPL_NAND_SUPPORT
  71 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  72 #define CONFIG_SYS_NAND_U_BOOT_DST      0x00200000
  73 #define CONFIG_SYS_NAND_U_BOOT_START    0x00200000
  74 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
  75 #define CONFIG_SYS_LDSCRIPT  "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  76 #define CONFIG_SPL_NAND_BOOT
  77 #endif
  78
  79 #ifdef CONFIG_SPIFLASH
  80 #define        CONFIG_RESET_VECTOR_ADDRESS             0x200FFC
  81 #define CONFIG_SPL_SPI_SUPPORT
  82 #define CONFIG_SPL_SPI_FLASH_SUPPORT
  83 #define CONFIG_SPL_SPI_FLASH_MINIMAL
  84 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE       (768 << 10)
  85 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST                (0x00200000)
  86 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START      (0x00200000)
  87 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS       (256 << 10)
  88 #define CONFIG_SYS_LDSCRIPT    "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  89 #ifndef CONFIG_SPL_BUILD
  90 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  91 #endif
  92 #define CONFIG_SPL_SPI_BOOT
  93 #endif
  94
  95 #ifdef CONFIG_SDCARD
  96 #define        CONFIG_RESET_VECTOR_ADDRESS             0x200FFC
  97 #define CONFIG_SPL_MMC_SUPPORT
  98 #define CONFIG_SPL_MMC_MINIMAL
  99 #define CONFIG_SYS_MMC_U_BOOT_SIZE     (768 << 10)
 100 #define CONFIG_SYS_MMC_U_BOOT_DST      (0x00200000)
 101 #define CONFIG_SYS_MMC_U_BOOT_START    (0x00200000)
 102 #define CONFIG_SYS_MMC_U_BOOT_OFFS     (260 << 10)
 103 #define CONFIG_SYS_LDSCRIPT    "arch/powerpc/cpu/mpc85xx/u-boot.lds"
 104 #ifndef CONFIG_SPL_BUILD
 105 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 106 #endif
 107 #define CONFIG_SPL_MMC_BOOT
 108 #endif
 109
 110 #endif /* CONFIG_RAMBOOT_PBL */
 111
 112 #define CONFIG_SRIO_PCIE_BOOT_MASTER
 113 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 114 /* Set 1M boot space */
 115 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
 116 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
 117                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
 118 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
 119 #define CONFIG_SYS_NO_FLASH
 120 #endif
 121
 122 #ifndef CONFIG_SYS_TEXT_BASE
 123 #define CONFIG_SYS_TEXT_BASE    0xeff40000
 124 #endif
 125
 126 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 127 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
 128 #endif
 129
 130 /*
 131  * These can be toggled for performance analysis, otherwise use default.
 132  */
 133 #define CONFIG_SYS_CACHE_STASHING
 134 #define CONFIG_BTB              /* toggle branch predition */
 135 #define CONFIG_DDR_ECC
 136 #ifdef CONFIG_DDR_ECC
 137 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 138 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 139 #endif
 140
 141 #ifndef CONFIG_SYS_NO_FLASH
 142 #define CONFIG_FLASH_CFI_DRIVER
 143 #define CONFIG_SYS_FLASH_CFI
 144 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 145 #endif
 146
 147 #if defined(CONFIG_SPIFLASH)
 148 #define CONFIG_SYS_EXTRA_ENV_RELOC
 149 #define CONFIG_ENV_IS_IN_SPI_FLASH
 150 #define CONFIG_ENV_SPI_BUS      0
 151 #define CONFIG_ENV_SPI_CS       0
 152 #define CONFIG_ENV_SPI_MAX_HZ   10000000
 153 #define CONFIG_ENV_SPI_MODE     0
 154 #define CONFIG_ENV_SIZE         0x2000     /* 8KB */
 155 #define CONFIG_ENV_OFFSET       0x100000   /* 1MB */
 156 #define CONFIG_ENV_SECT_SIZE    0x10000
 157 #elif defined(CONFIG_SDCARD)
 158 #define CONFIG_SYS_EXTRA_ENV_RELOC
 159 #define CONFIG_ENV_IS_IN_MMC
 160 #define CONFIG_SYS_MMC_ENV_DEV  0
 161 #define CONFIG_ENV_SIZE         0x2000
 162 #define CONFIG_ENV_OFFSET       (512 * 0x800)
 163 #elif defined(CONFIG_NAND)
 164 #define CONFIG_SYS_EXTRA_ENV_RELOC
 165 #define CONFIG_ENV_IS_IN_NAND
 166 #define CONFIG_ENV_SIZE         0x2000
 167 #define CONFIG_ENV_OFFSET       (2 * CONFIG_SYS_NAND_BLOCK_SIZE)
 168 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 169 #define CONFIG_ENV_IS_IN_REMOTE
 170 #define CONFIG_ENV_ADDR         0xffe20000
 171 #define CONFIG_ENV_SIZE         0x2000
 172 #elif defined(CONFIG_ENV_IS_NOWHERE)
 173 #define CONFIG_ENV_SIZE         0x2000
 174 #else
 175 #define CONFIG_ENV_IS_IN_FLASH
 176 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 177 #define CONFIG_ENV_SIZE         0x2000
 178 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 179 #endif
 180
 181 #ifndef __ASSEMBLY__
 182 unsigned long get_board_sys_clk(void);
 183 unsigned long get_board_ddr_clk(void);
 184 #endif
 185
 186 #define CONFIG_SYS_CLK_FREQ     66660000
 187 #define CONFIG_DDR_CLK_FREQ     133330000
 188
 189 /*
 190  * Config the L3 Cache as L3 SRAM
 191  */
 192 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 193 #define CONFIG_SYS_L3_SIZE              (512 << 10)
 194 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
 195 #ifdef CONFIG_RAMBOOT_PBL
 196 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
 197 #endif
 198 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 199 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (50 << 10)
 200 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 201 #define CONFIG_SPL_RELOC_STACK_SIZE     (22 << 10)
 202
 203 #define CONFIG_SYS_DCSRBAR      0xf0000000
 204 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull
 205
 206 /* EEPROM */
 207 #define CONFIG_ID_EEPROM
 208 #define CONFIG_SYS_I2C_EEPROM_NXID
 209 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 210 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50
 211 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  2
 212
 213 /*
 214  * DDR Setup
 215  */
 216 #define CONFIG_VERY_BIG_RAM
 217 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 218 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 219 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 220 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 221 #define CONFIG_DDR_SPD
 222 #define CONFIG_SYS_FSL_DDR3
 223 #undef CONFIG_FSL_DDR_INTERACTIVE
 224 #define CONFIG_SYS_SPD_BUS_NUM  0
 225 #define CONFIG_SYS_SDRAM_SIZE   2048    /* for fixed parameter use */
 226 #define SPD_EEPROM_ADDRESS1     0x51
 227 #define SPD_EEPROM_ADDRESS2     0x52
 228 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1
 229 #define CTRL_INTLV_PREFERED     cacheline
 230
 231 /*
 232  * IFC Definitions
 233  */
 234 #define CONFIG_SYS_FLASH_BASE           0xe8000000
 235 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 236 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 237 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 238                                 CSPR_PORT_SIZE_16 | \
 239                                 CSPR_MSEL_NOR | \
 240                                 CSPR_V)
 241 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 242
 243 /* NOR Flash Timing Params */
 244 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 245
 246 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 247                                 FTIM0_NOR_TEADC(0x5) | \
 248                                 FTIM0_NOR_TEAHC(0x5))
 249 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 250                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 251                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 252 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 253                                 FTIM2_NOR_TCH(0x4) | \
 254                                 FTIM2_NOR_TWPH(0x0E) | \
 255                                 FTIM2_NOR_TWP(0x1c))
 256 #define CONFIG_SYS_NOR_FTIM3    0x0
 257
 258 #define CONFIG_SYS_FLASH_QUIET_TEST
 259 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 260
 261 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 262 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 263 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 264 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 265 #define CONFIG_SYS_FLASH_EMPTY_INFO
 266 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS }
 267
 268 /* CPLD on IFC */
 269 #define CONFIG_SYS_CPLD_BASE    0xffdf0000
 270 #define CONFIG_SYS_CPLD_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
 271 #define CONFIG_SYS_CSPR2_EXT    (0xf)
 272 #define CONFIG_SYS_CSPR2        (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE) \
 273                                 | CSPR_PORT_SIZE_8 \
 274                                 | CSPR_MSEL_GPCM \
 275                                 | CSPR_V)
 276 #define CONFIG_SYS_AMASK2       IFC_AMASK(64*1024)
 277 #define CONFIG_SYS_CSOR2        0x0
 278
 279 /* CPLD Timing parameters for IFC CS2 */
 280 #define CONFIG_SYS_CS2_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 281                                         FTIM0_GPCM_TEADC(0x0e) | \
 282                                         FTIM0_GPCM_TEAHC(0x0e))
 283 #define CONFIG_SYS_CS2_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 284                                         FTIM1_GPCM_TRAD(0x1f))
 285 #define CONFIG_SYS_CS2_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 286                                         FTIM2_GPCM_TCH(0x0) | \
 287                                         FTIM2_GPCM_TWP(0x1f))
 288 #define CONFIG_SYS_CS2_FTIM3            0x0
 289
 290 /* NAND Flash on IFC */
 291 #define CONFIG_NAND_FSL_IFC
 292 #define CONFIG_SYS_NAND_BASE            0xff800000
 293 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 294
 295 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 296 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 297                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 298                                 | CSPR_MSEL_NAND         /* MSEL = NAND */ \
 299                                 | CSPR_V)
 300 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 301
 302 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 303                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 304                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */     \
 305                                 | CSOR_NAND_RAL_3       /* RAL = 2Byes */   \
 306                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */\
 307                                 | CSOR_NAND_SPRZ_64     /* Spare size = 64 */\
 308                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 309
 310 #define CONFIG_SYS_NAND_ONFI_DETECTION
 311
 312 /* ONFI NAND Flash mode0 Timing Params */
 313 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 314                                         FTIM0_NAND_TWP(0x18)    | \
 315                                         FTIM0_NAND_TWCHT(0x07)  | \
 316                                         FTIM0_NAND_TWH(0x0a))
 317 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 318                                         FTIM1_NAND_TWBE(0x39)   | \
 319                                         FTIM1_NAND_TRR(0x0e)    | \
 320                                         FTIM1_NAND_TRP(0x18))
 321 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f)  | \
 322                                         FTIM2_NAND_TREH(0x0a)   | \
 323                                         FTIM2_NAND_TWHRE(0x1e))
 324 #define CONFIG_SYS_NAND_FTIM3           0x0
 325
 326 #define CONFIG_SYS_NAND_DDR_LAW         11
 327 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 328 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 329 #define CONFIG_MTD_NAND_VERIFY_WRITE
 330 #define CONFIG_CMD_NAND
 331 #define CONFIG_SYS_NAND_BLOCK_SIZE      (512 * 1024)
 332
 333 #if defined(CONFIG_NAND)
 334 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 335 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 336 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 337 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 338 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 339 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 340 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 341 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 342 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 343 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR0_CSPR
 344 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 345 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 346 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 347 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 348 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 349 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 350 #else
 351 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 352 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 353 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 354 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 355 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 356 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 357 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 358 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 359 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NAND_CSPR_EXT
 360 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 361 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 362 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 363 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 364 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 365 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 366 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 367 #endif
 368
 369 #if defined(CONFIG_RAMBOOT_PBL)
 370 #define CONFIG_SYS_RAMBOOT
 371 #endif
 372
 373 #ifdef CONFIG_SPL_BUILD
 374 #define CONFIG_SYS_MONITOR_BASE  CONFIG_SPL_TEXT_BASE
 375 #else
 376 #define CONFIG_SYS_MONITOR_BASE  CONFIG_SYS_TEXT_BASE /* start of monitor */
 377 #endif
 378
 379 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
 380 #define CONFIG_MISC_INIT_R
 381 #define CONFIG_HWCONFIG
 382
 383 /* define to use L1 as initial stack */
 384 #define CONFIG_L1_INIT_RAM
 385 #define CONFIG_SYS_INIT_RAM_LOCK
 386 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000 /* Initial L1 address */
 387 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 388 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe0ec000
 389 /* The assembler doesn't like typecast */
 390 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 391                         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 392                         CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 393 #define CONFIG_SYS_INIT_RAM_SIZE        0x00004000
 394 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 395                                                 GENERATED_GBL_DATA_SIZE)
 396 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 397 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 398 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 399
 400 /*
 401  * Serial Port
 402  */
 403 #define CONFIG_CONS_INDEX               1
 404 #define CONFIG_SYS_NS16550
 405 #define CONFIG_SYS_NS16550_SERIAL
 406 #define CONFIG_SYS_NS16550_REG_SIZE     1
 407 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 408 #define CONFIG_SYS_BAUDRATE_TABLE       \
 409         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 410 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 411 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 412 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 413 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 414
 415 /* Use the HUSH parser */
 416 #define CONFIG_SYS_HUSH_PARSER
 417 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 418
 419 /* pass open firmware flat tree */
 420 #define CONFIG_OF_LIBFDT
 421 #define CONFIG_OF_BOARD_SETUP
 422 #define CONFIG_OF_STDOUT_VIA_ALIAS
 423
 424 /* new uImage format support */
 425 #define CONFIG_FIT
 426 #define CONFIG_FIT_VERBOSE      /* enable fit_format_{error,warning}() */
 427
 428 /*
 429  * I2C
 430  */
 431 #define CONFIG_SYS_I2C
 432 #define CONFIG_SYS_I2C_FSL
 433 #define CONFIG_SYS_FSL_I2C_SLAVE   0x7F
 434 #define CONFIG_SYS_FSL_I2C2_SLAVE  0x7F
 435 #define CONFIG_SYS_FSL_I2C3_SLAVE  0x7F
 436 #define CONFIG_SYS_FSL_I2C4_SLAVE  0x7F
 437 #define CONFIG_SYS_FSL_I2C_OFFSET  0x118000
 438 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100
 439 #define CONFIG_SYS_FSL_I2C3_OFFSET 0x119000
 440 #define CONFIG_SYS_FSL_I2C4_OFFSET 0x119100
 441 #define CONFIG_SYS_FSL_I2C_SPEED   100000
 442 #define CONFIG_SYS_FSL_I2C2_SPEED  100000
 443 #define CONFIG_SYS_FSL_I2C3_SPEED  100000
 444 #define CONFIG_SYS_FSL_I2C4_SPEED  100000
 445 #define I2C_MUX_PCA_ADDR_PRI    0x77 /* I2C bus multiplexer,primary */
 446 #define I2C_MUX_PCA_ADDR_SEC1   0x75 /* I2C bus multiplexer,secondary 1 */
 447 #define I2C_MUX_PCA_ADDR_SEC2   0x76 /* I2C bus multiplexer,secondary 2 */
 448 #define I2C_MUX_CH_DEFAULT      0x8
 449
 450
 451 /*
 452  * RapidIO
 453  */
 454 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xa0000000
 455 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc20000000ull
 456 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x10000000 /* 256M */
 457 #define CONFIG_SYS_SRIO2_MEM_VIRT       0xb0000000
 458 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xc30000000ull
 459 #define CONFIG_SYS_SRIO2_MEM_SIZE       0x10000000 /* 256M */
 460 /*
 461  * for slave u-boot IMAGE instored in master memory space,
 462  * PHYS must be aligned based on the SIZE
 463  */
 464 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef080000ull
 465 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff80000ull
 466 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE     0x80000 /* 512K */
 467 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff80000ull
 468 /*
 469  * for slave UCODE and ENV instored in master memory space,
 470  * PHYS must be aligned based on the SIZE
 471  */
 472 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef040000ull
 473 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
 474 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE    0x40000 /* 256K */
 475
 476 /* slave core release by master*/
 477 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
 478 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
 479
 480 /*
 481  * SRIO_PCIE_BOOT - SLAVE
 482  */
 483 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 484 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 485 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 486                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 487 #endif
 488
 489 /*
 490  * eSPI - Enhanced SPI
 491  */
 492 #ifdef CONFIG_SPI_FLASH
 493 #define CONFIG_FSL_ESPI
 494 #define CONFIG_SPI_FLASH_STMICRO
 495 #define CONFIG_SPI_FLASH_BAR
 496 #define CONFIG_CMD_SF
 497 #define CONFIG_SF_DEFAULT_SPEED  10000000
 498 #define CONFIG_SF_DEFAULT_MODE    0
 499 #endif
 500
 501 /*
 502  * General PCI
 503  * Memory space is mapped 1-1, but I/O space must start from 0.
 504  */
 505 #define CONFIG_PCI              /* Enable PCI/PCIE */
 506 #define CONFIG_PCIE1            /* PCIE controler 1 */
 507 #define CONFIG_PCIE2            /* PCIE controler 2 */
 508 #define CONFIG_PCIE3            /* PCIE controler 3 */
 509 #define CONFIG_PCIE4            /* PCIE controler 4 */
 510 #define CONFIG_FSL_PCI_INIT     /* Use common FSL init code */
 511 #define CONFIG_SYS_PCI_64BIT    /* enable 64-bit PCI resources */
 512 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 513 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 514 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 515 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 516 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 517 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 518 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 519 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 520 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 521
 522 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 523 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 524 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 525 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 526 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000 /* 256M */
 527 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 528 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 529 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 530 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 531
 532 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 533 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xb0000000
 534 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 535 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc30000000ull
 536 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x10000000      /* 256M */
 537 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 538 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 539 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 540 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 541
 542 /* controller 4, Base address 203000 */
 543 #define CONFIG_SYS_PCIE4_MEM_VIRT       0xc0000000
 544 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 545 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc40000000ull
 546 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x10000000      /* 256M */
 547 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 548 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 549 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 550
 551 #ifdef CONFIG_PCI
 552 #define CONFIG_PCI_INDIRECT_BRIDGE
 553 #define CONFIG_FSL_PCIE_RESET           /* need PCIe reset errata LSZ ADD */
 554 #define CONFIG_NET_MULTI
 555 #define CONFIG_E1000
 556 #define CONFIG_PCI_PNP          /* do pci plug-and-play */
 557 #define CONFIG_PCI_SCAN_SHOW    /* show pci devices on startup */
 558 #define CONFIG_DOS_PARTITION
 559 #endif
 560
 561 /* Qman/Bman */
 562 #ifndef CONFIG_NOBQFMAN
 563 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 564 #define CONFIG_SYS_BMAN_NUM_PORTALS     18
 565 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 566 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 567 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 568 #define CONFIG_SYS_QMAN_NUM_PORTALS     18
 569 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 570 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 571 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 572
 573 #define CONFIG_SYS_DPAA_FMAN
 574 #define CONFIG_SYS_DPAA_PME
 575 #define CONFIG_SYS_PMAN
 576 #define CONFIG_SYS_DPAA_DCE
 577 #define CONFIG_SYS_DPAA_RMAN            /* RMan */
 578 #define CONFIG_SYS_INTERLAKEN
 579
 580 /* Default address of microcode for the Linux Fman driver */
 581 #if defined(CONFIG_SPIFLASH)
 582 /*
 583  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 584  * env, so we got 0x110000.
 585  */
 586 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 587 #define CONFIG_SYS_CORTINA_FW_IN_SPIFLASH
 588 #define CONFIG_SYS_FMAN_FW_ADDR         0x110000
 589 #define CONFIG_CORTINA_FW_ADDR          0x120000
 590
 591 #elif defined(CONFIG_SDCARD)
 592 /*
 593  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 594  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 595  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
 596  */
 597 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 598 #define CONFIG_SYS_CORTINA_FW_IN_MMC
 599 #define CONFIG_SYS_FMAN_FW_ADDR         (512 * 0x820)
 600 #define CONFIG_CORTINA_FW_ADDR          (512 * 0x8a0)
 601
 602 #elif defined(CONFIG_NAND)
 603 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 604 #define CONFIG_SYS_CORTINA_FW_IN_NAND
 605 #define CONFIG_SYS_FMAN_FW_ADDR         (3 * CONFIG_SYS_NAND_BLOCK_SIZE)
 606 #define CONFIG_CORTINA_FW_ADDR          (4 * CONFIG_SYS_NAND_BLOCK_SIZE)
 607 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 608 /*
 609  * Slave has no ucode locally, it can fetch this from remote. When implementing
 610  * in two corenet boards, slave's ucode could be stored in master's memory
 611  * space, the address can be mapped from slave TLB->slave LAW->
 612  * slave SRIO or PCIE outbound window->master inbound window->
 613  * master LAW->the ucode address in master's memory space.
 614  */
 615 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 616 #define CONFIG_SYS_CORTINA_FW_IN_REMOTE
 617 #define CONFIG_SYS_FMAN_FW_ADDR         0xFFE00000
 618 #define CONFIG_CORTINA_FW_ADDR          0xFFE10000
 619 #else
 620 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 621 #define CONFIG_SYS_CORTINA_FW_IN_NOR
 622 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 623 #define CONFIG_CORTINA_FW_ADDR          0xEFE00000
 624 #endif
 625 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 626 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 627 #endif /* CONFIG_NOBQFMAN */
 628
 629 #ifdef CONFIG_SYS_DPAA_FMAN
 630 #define CONFIG_FMAN_ENET
 631 #define CONFIG_PHYLIB_10G
 632 #define CONFIG_PHY_CORTINA
 633 #define CONFIG_PHY_AQ1202
 634 #define CONFIG_PHY_REALTEK
 635 #define CONFIG_CORTINA_FW_LENGTH        0x40000
 636 #define RGMII_PHY1_ADDR         0x01  /* RealTek RTL8211E */
 637 #define RGMII_PHY2_ADDR         0x02
 638 #define CORTINA_PHY_ADDR1       0x0c  /* Cortina CS4315 */
 639 #define CORTINA_PHY_ADDR2       0x0d
 640 #define FM1_10GEC3_PHY_ADDR     0x00  /* Aquantia AQ1202 10G Base-T */
 641 #define FM1_10GEC4_PHY_ADDR     0x01
 642 #endif
 643
 644
 645 #ifdef CONFIG_FMAN_ENET
 646 #define CONFIG_MII              /* MII PHY management */
 647 #define CONFIG_ETHPRIME         "FM1@DTSEC3"
 648 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 649 #endif
 650
 651 /*
 652  * SATA
 653  */
 654 #ifdef CONFIG_FSL_SATA_V2
 655 #define CONFIG_LIBATA
 656 #define CONFIG_FSL_SATA
 657 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 658 #define CONFIG_SATA1
 659 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 660 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 661 #define CONFIG_SATA2
 662 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 663 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 664 #define CONFIG_LBA48
 665 #define CONFIG_CMD_SATA
 666 #define CONFIG_DOS_PARTITION
 667 #define CONFIG_CMD_EXT2
 668 #endif
 669
 670 /*
 671  * USB
 672  */
 673 #ifdef CONFIG_USB_EHCI
 674 #define CONFIG_CMD_USB
 675 #define CONFIG_USB_STORAGE
 676 #define CONFIG_USB_EHCI_FSL
 677 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 678 #define CONFIG_CMD_EXT2
 679 #define CONFIG_HAS_FSL_DR_USB
 680 #endif
 681
 682 /*
 683  * SDHC
 684  */
 685 #ifdef CONFIG_MMC
 686 #define CONFIG_CMD_MMC
 687 #define CONFIG_FSL_ESDHC
 688 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 689 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 690 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 691 #define CONFIG_GENERIC_MMC
 692 #define CONFIG_CMD_EXT2
 693 #define CONFIG_CMD_FAT
 694 #define CONFIG_DOS_PARTITION
 695 #endif
 696
 697 /*
 698  * Dynamic MTD Partition support with mtdparts
 699  */
 700 #ifndef CONFIG_SYS_NO_FLASH
 701 #define CONFIG_MTD_DEVICE
 702 #define CONFIG_MTD_PARTITIONS
 703 #define CONFIG_CMD_MTDPARTS
 704 #define CONFIG_FLASH_CFI_MTD
 705 #define MTDIDS_DEFAULT "nor0=fe8000000.nor,nand0=fff800000.flash," \
 706                         "spi0=spife110000.1"
 707 #define MTDPARTS_DEFAULT "mtdparts=fe8000000.nor:1m(uboot),5m(kernel)," \
 708                         "128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot)," \
 709                         "5m(kernel),128k(dtb),96m(fs),-(user);spife110000.1:" \
 710                         "1m(uboot),5m(kernel),128k(dtb),-(user)"
 711 #endif
 712
 713 /*
 714  * Environment
 715  */
 716
 717 /*
 718  * Command line configuration.
 719  */
 720 #include <config_cmd_default.h>
 721
 722 #define CONFIG_CMD_DHCP
 723 #define CONFIG_CMD_ELF
 724 #define CONFIG_CMD_MII
 725 #define CONFIG_CMD_I2C
 726 #define CONFIG_CMD_PING
 727 #define CONFIG_CMD_ECHO
 728 #define CONFIG_CMD_SETEXPR
 729 #define CONFIG_CMD_REGINFO
 730 #define CONFIG_CMD_BDI
 731
 732 #ifdef CONFIG_PCI
 733 #define CONFIG_CMD_PCI
 734 #define CONFIG_CMD_NET
 735 #endif
 736
 737 /*
 738  * Miscellaneous configurable options
 739  */
 740 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 741 #define CONFIG_CMDLINE_EDITING          /* Command-line editing */
 742 #define CONFIG_AUTO_COMPLETE            /* add autocompletion support */
 743 #define CONFIG_SYS_LOAD_ADDR    0x2000000 /* default load address */
 744 #define CONFIG_SYS_PROMPT       "=> "     /* Monitor Command Prompt */
 745 #ifdef CONFIG_CMD_KGDB
 746 #define CONFIG_SYS_CBSIZE       1024      /* Console I/O Buffer Size */
 747 #else
 748 #define CONFIG_SYS_CBSIZE       256       /* Console I/O Buffer Size */
 749 #endif
 750 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 751 #define CONFIG_SYS_MAXARGS      16      /* max number of command args */
 752 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 753 #define CONFIG_SYS_HZ           1000    /* decrementer freq: 1ms ticks*/
 754
 755 /*
 756  * For booting Linux, the board info and command line data
 757  * have to be in the first 64 MB of memory, since this is
 758  * the maximum mapped by the Linux kernel during initialization.
 759  */
 760 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 761 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 762
 763 #ifdef CONFIG_CMD_KGDB
 764 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 765 #define CONFIG_KGDB_SER_INDEX   2       /* which serial port to use */
 766 #endif
 767
 768 /*
 769  * Environment Configuration
 770  */
 771 #define CONFIG_ROOTPATH  "/opt/nfsroot"
 772 #define CONFIG_BOOTFILE  "uImage"
 773 #define CONFIG_UBOOTPATH "u-boot.bin"   /* U-Boot image on TFTP server */
 774
 775 /* default location for tftp and bootm */
 776 #define CONFIG_LOADADDR         1000000
 777 #define CONFIG_BAUDRATE         115200
 778 #define CONFIG_BOOTDELAY        10      /* -1 disables auto-boot */
 779 #define __USB_PHY_TYPE          utmi
 780
 781 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 782         "hwconfig=fsl_ddr:"                                     \
 783         "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) ","      \
 784         "bank_intlv=auto;"                                      \
 785         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 786         "netdev=eth0\0"                                         \
 787         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 788         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 789         "tftpflash=tftpboot $loadaddr $uboot && "               \
 790         "protect off $ubootaddr +$filesize && "                 \
 791         "erase $ubootaddr +$filesize && "                       \
 792         "cp.b $loadaddr $ubootaddr $filesize && "               \
 793         "protect on $ubootaddr +$filesize && "                  \
 794         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 795         "consoledev=ttyS0\0"                                    \
 796         "ramdiskaddr=2000000\0"                                 \
 797         "ramdiskfile=t2080rdb/ramdisk.uboot\0"                  \
 798         "fdtaddr=c00000\0"                                      \
 799         "fdtfile=t2080rdb/t2080rdb.dtb\0"                       \
 800         "bdev=sda3\0"                                           \
 801         "c=ffe\0"
 802
 803 /*
 804  * For emulation this causes u-boot to jump to the start of the
 805  * proof point app code automatically
 806  */
 807 #define CONFIG_PROOF_POINTS                             \
 808         "setenv bootargs root=/dev/$bdev rw "           \
 809         "console=$consoledev,$baudrate $othbootargs;"   \
 810         "cpu 1 release 0x29000000 - - -;"               \
 811         "cpu 2 release 0x29000000 - - -;"               \
 812         "cpu 3 release 0x29000000 - - -;"               \
 813         "cpu 4 release 0x29000000 - - -;"               \
 814         "cpu 5 release 0x29000000 - - -;"               \
 815         "cpu 6 release 0x29000000 - - -;"               \
 816         "cpu 7 release 0x29000000 - - -;"               \
 817         "go 0x29000000"
 818
 819 #define CONFIG_HVBOOT                           \
 820         "setenv bootargs config-addr=0x60000000; "      \
 821         "bootm 0x01000000 - 0x00f00000"
 822
 823 #define CONFIG_ALU                              \
 824         "setenv bootargs root=/dev/$bdev rw "           \
 825         "console=$consoledev,$baudrate $othbootargs;"   \
 826         "cpu 1 release 0x01000000 - - -;"               \
 827         "cpu 2 release 0x01000000 - - -;"               \
 828         "cpu 3 release 0x01000000 - - -;"               \
 829         "cpu 4 release 0x01000000 - - -;"               \
 830         "cpu 5 release 0x01000000 - - -;"               \
 831         "cpu 6 release 0x01000000 - - -;"               \
 832         "cpu 7 release 0x01000000 - - -;"               \
 833         "go 0x01000000"
 834
 835 #define CONFIG_LINUX                            \
 836         "setenv bootargs root=/dev/ram rw "             \
 837         "console=$consoledev,$baudrate $othbootargs;"   \
 838         "setenv ramdiskaddr 0x02000000;"                \
 839         "setenv fdtaddr 0x00c00000;"                    \
 840         "setenv loadaddr 0x1000000;"                    \
 841         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 842
 843 #define CONFIG_HDBOOT                                   \
 844         "setenv bootargs root=/dev/$bdev rw "           \
 845         "console=$consoledev,$baudrate $othbootargs;"   \
 846         "tftp $loadaddr $bootfile;"                     \
 847         "tftp $fdtaddr $fdtfile;"                       \
 848         "bootm $loadaddr - $fdtaddr"
 849
 850 #define CONFIG_NFSBOOTCOMMAND                   \
 851         "setenv bootargs root=/dev/nfs rw "     \
 852         "nfsroot=$serverip:$rootpath "          \
 853         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 854         "console=$consoledev,$baudrate $othbootargs;"   \
 855         "tftp $loadaddr $bootfile;"             \
 856         "tftp $fdtaddr $fdtfile;"               \
 857         "bootm $loadaddr - $fdtaddr"
 858
 859 #define CONFIG_RAMBOOTCOMMAND                           \
 860         "setenv bootargs root=/dev/ram rw "             \
 861         "console=$consoledev,$baudrate $othbootargs;"   \
 862         "tftp $ramdiskaddr $ramdiskfile;"               \
 863         "tftp $loadaddr $bootfile;"                     \
 864         "tftp $fdtaddr $fdtfile;"                       \
 865         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 866
 867 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 868
 869 #ifdef CONFIG_SECURE_BOOT
 870 #include <asm/fsl_secure_boot.h>
 871 #undef CONFIG_CMD_USB
 872 #endif
 873
 874 #endif  /* __T2080RDB_H */