include/configs/T4240QDS.h

   1 /*
   2  * Copyright 2011-2012 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * T4240 QDS board configuration file
   9  */
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 #define CONFIG_T4240QDS
  14 #define CONFIG_PHYS_64BIT
  15
  16 #define CONFIG_FSL_SATA_V2
  17 #define CONFIG_PCIE4
  18 #define CONFIG_FSL_CAAM                 /* Enable SEC/CAAM */
  19
  20 #define CONFIG_ICS307_REFCLK_HZ         25000000  /* ICS307 ref clk freq */
  21
  22 #ifdef CONFIG_RAMBOOT_PBL
  23 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t4qds/t4_pbi.cfg
  24 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t4qds/t4_rcw.cfg
  25 #if !defined(CONFIG_NAND) && !defined(CONFIG_SDCARD)
  26 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  27 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  28 #else
  29 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
  30 #define CONFIG_SPL_ENV_SUPPORT
  31 #define CONFIG_SPL_SERIAL_SUPPORT
  32 #define CONFIG_SPL_FLUSH_IMAGE
  33 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  34 #define CONFIG_SPL_LIBGENERIC_SUPPORT
  35 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  36 #define CONFIG_SPL_I2C_SUPPORT
  37 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT
  38 #define CONFIG_FSL_LAW                 /* Use common FSL init code */
  39 #define CONFIG_SYS_TEXT_BASE            0x00201000
  40 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
  41 #define CONFIG_SPL_PAD_TO               0x40000
  42 #define CONFIG_SPL_MAX_SIZE             0x28000
  43 #define RESET_VECTOR_OFFSET             0x27FFC
  44 #define BOOT_PAGE_OFFSET                0x27000
  45
  46 #ifdef  CONFIG_NAND
  47 #define CONFIG_SPL_NAND_SUPPORT
  48 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  49 #define CONFIG_SYS_NAND_U_BOOT_DST      0x00200000
  50 #define CONFIG_SYS_NAND_U_BOOT_START    0x00200000
  51 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
  52 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  53 #define CONFIG_SPL_NAND_BOOT
  54 #endif
  55
  56 #ifdef  CONFIG_SDCARD
  57 #define CONFIG_RESET_VECTOR_ADDRESS     0x200FFC
  58 #define CONFIG_SPL_MMC_SUPPORT
  59 #define CONFIG_SPL_MMC_MINIMAL
  60 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
  61 #define CONFIG_SYS_MMC_U_BOOT_DST       0x00200000
  62 #define CONFIG_SYS_MMC_U_BOOT_START     0x00200000
  63 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
  64 #ifndef CONFIG_SPL_BUILD
  65 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  66 #endif
  67 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  68 #define CONFIG_SPL_MMC_BOOT
  69 #endif
  70
  71 #ifdef CONFIG_SPL_BUILD
  72 #define CONFIG_SPL_SKIP_RELOCATE
  73 #define CONFIG_SPL_COMMON_INIT_DDR
  74 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  75 #define CONFIG_SYS_NO_FLASH
  76 #endif
  77
  78 #endif
  79 #endif /* CONFIG_RAMBOOT_PBL */
  80
  81 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
  82 /* Set 1M boot space */
  83 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
  84 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
  85                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
  86 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
  87 #define CONFIG_SYS_NO_FLASH
  88 #endif
  89
  90 #define CONFIG_SRIO_PCIE_BOOT_MASTER
  91 #define CONFIG_DDR_ECC
  92
  93 #include "t4qds.h"
  94
  95 #ifdef CONFIG_SYS_NO_FLASH
  96 #if !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) && !defined(CONFIG_RAMBOOT_PBL)
  97 #define CONFIG_ENV_IS_NOWHERE
  98 #endif
  99 #else
 100 #define CONFIG_FLASH_CFI_DRIVER
 101 #define CONFIG_SYS_FLASH_CFI
 102 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 103 #endif
 104
 105 #if defined(CONFIG_SPIFLASH)
 106 #define CONFIG_SYS_EXTRA_ENV_RELOC
 107 #define CONFIG_ENV_IS_IN_SPI_FLASH
 108 #define CONFIG_ENV_SPI_BUS              0
 109 #define CONFIG_ENV_SPI_CS               0
 110 #define CONFIG_ENV_SPI_MAX_HZ           10000000
 111 #define CONFIG_ENV_SPI_MODE             0
 112 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 113 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 114 #define CONFIG_ENV_SECT_SIZE            0x10000
 115 #elif defined(CONFIG_SDCARD)
 116 #define CONFIG_SYS_EXTRA_ENV_RELOC
 117 #define CONFIG_ENV_IS_IN_MMC
 118 #define CONFIG_SYS_MMC_ENV_DEV          0
 119 #define CONFIG_ENV_SIZE                 0x2000
 120 #define CONFIG_ENV_OFFSET               (512 * 0x800)
 121 #elif defined(CONFIG_NAND)
 122 #define CONFIG_SYS_EXTRA_ENV_RELOC
 123 #define CONFIG_ENV_IS_IN_NAND
 124 #define CONFIG_ENV_SIZE                 0x2000
 125 #define CONFIG_ENV_OFFSET               (10 * CONFIG_SYS_NAND_BLOCK_SIZE)
 126 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 127 #define CONFIG_ENV_IS_IN_REMOTE
 128 #define CONFIG_ENV_ADDR         0xffe20000
 129 #define CONFIG_ENV_SIZE         0x2000
 130 #elif defined(CONFIG_ENV_IS_NOWHERE)
 131 #define CONFIG_ENV_SIZE         0x2000
 132 #else
 133 #define CONFIG_ENV_IS_IN_FLASH
 134 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 135 #define CONFIG_ENV_SIZE         0x2000
 136 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 137 #endif
 138
 139 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk()
 140 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk()
 141
 142 #ifndef __ASSEMBLY__
 143 unsigned long get_board_sys_clk(void);
 144 unsigned long get_board_ddr_clk(void);
 145 #endif
 146
 147 /* EEPROM */
 148 #define CONFIG_ID_EEPROM
 149 #define CONFIG_SYS_I2C_EEPROM_NXID
 150 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 151 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 152 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 153
 154 /*
 155  * DDR Setup
 156  */
 157 #define CONFIG_SYS_SPD_BUS_NUM  0
 158 #define SPD_EEPROM_ADDRESS1     0x51
 159 #define SPD_EEPROM_ADDRESS2     0x52
 160 #define SPD_EEPROM_ADDRESS3     0x53
 161 #define SPD_EEPROM_ADDRESS4     0x54
 162 #define SPD_EEPROM_ADDRESS5     0x55
 163 #define SPD_EEPROM_ADDRESS6     0x56
 164 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1     /* for p3041/p5010 */
 165 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 166
 167 /*
 168  * IFC Definitions
 169  */
 170 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 171 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 172                                 + 0x8000000) | \
 173                                 CSPR_PORT_SIZE_16 | \
 174                                 CSPR_MSEL_NOR | \
 175                                 CSPR_V)
 176 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 177 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 178                                 CSPR_PORT_SIZE_16 | \
 179                                 CSPR_MSEL_NOR | \
 180                                 CSPR_V)
 181 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 182 /* NOR Flash Timing Params */
 183 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 184
 185 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 186                                 FTIM0_NOR_TEADC(0x5) | \
 187                                 FTIM0_NOR_TEAHC(0x5))
 188 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 189                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 190                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 191 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 192                                 FTIM2_NOR_TCH(0x4) | \
 193                                 FTIM2_NOR_TWPH(0x0E) | \
 194                                 FTIM2_NOR_TWP(0x1c))
 195 #define CONFIG_SYS_NOR_FTIM3    0x0
 196
 197 #define CONFIG_SYS_FLASH_QUIET_TEST
 198 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 199
 200 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 201 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 202 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 203 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 204
 205 #define CONFIG_SYS_FLASH_EMPTY_INFO
 206 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 207                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 208
 209 #define CONFIG_FSL_QIXIS        /* use common QIXIS code */
 210 #define QIXIS_BASE                      0xffdf0000
 211 #define QIXIS_LBMAP_SWITCH              6
 212 #define QIXIS_LBMAP_MASK                0x0f
 213 #define QIXIS_LBMAP_SHIFT               0
 214 #define QIXIS_LBMAP_DFLTBANK            0x00
 215 #define QIXIS_LBMAP_ALTBANK             0x04
 216 #define QIXIS_RST_CTL_RESET             0x83
 217 #define QIXIS_RST_FORCE_MEM             0x1
 218 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 219 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 220 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 221 #define QIXIS_BRDCFG5                   0x55
 222 #define QIXIS_MUX_SDHC                  2
 223 #define QIXIS_MUX_SDHC_WIDTH8           1
 224 #define QIXIS_BASE_PHYS         (0xf00000000ull | QIXIS_BASE)
 225
 226 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 227 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
 228                                 | CSPR_PORT_SIZE_8 \
 229                                 | CSPR_MSEL_GPCM \
 230                                 | CSPR_V)
 231 #define CONFIG_SYS_AMASK3       IFC_AMASK(4*1024)
 232 #define CONFIG_SYS_CSOR3        0x0
 233 /* QIXIS Timing parameters for IFC CS3 */
 234 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 235                                         FTIM0_GPCM_TEADC(0x0e) | \
 236                                         FTIM0_GPCM_TEAHC(0x0e))
 237 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0xff) | \
 238                                         FTIM1_GPCM_TRAD(0x3f))
 239 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 240                                         FTIM2_GPCM_TCH(0x8) | \
 241                                         FTIM2_GPCM_TWP(0x1f))
 242 #define CONFIG_SYS_CS3_FTIM3            0x0
 243
 244 /* NAND Flash on IFC */
 245 #define CONFIG_NAND_FSL_IFC
 246 #define CONFIG_SYS_NAND_BASE            0xff800000
 247 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 248
 249 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 250 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 251                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 252                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 253                                 | CSPR_V)
 254 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 255
 256 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 257                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 258                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 259                                 | CSOR_NAND_RAL_3       /* RAL = 2Byes */ \
 260                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 261                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
 262                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 263
 264 #define CONFIG_SYS_NAND_ONFI_DETECTION
 265
 266 /* ONFI NAND Flash mode0 Timing Params */
 267 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 268                                         FTIM0_NAND_TWP(0x18)   | \
 269                                         FTIM0_NAND_TWCHT(0x07) | \
 270                                         FTIM0_NAND_TWH(0x0a))
 271 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 272                                         FTIM1_NAND_TWBE(0x39)  | \
 273                                         FTIM1_NAND_TRR(0x0e)   | \
 274                                         FTIM1_NAND_TRP(0x18))
 275 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 276                                         FTIM2_NAND_TREH(0x0a) | \
 277                                         FTIM2_NAND_TWHRE(0x1e))
 278 #define CONFIG_SYS_NAND_FTIM3           0x0
 279
 280 #define CONFIG_SYS_NAND_DDR_LAW         11
 281
 282 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 283 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 284 #define CONFIG_CMD_NAND
 285
 286 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 287 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
 288 #define CONFIG_SYS_NAND_MAX_ECCPOS      256
 289
 290 #if defined(CONFIG_NAND)
 291 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 292 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 293 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 294 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 295 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 296 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 297 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 298 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 299 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 300 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR0_CSPR
 301 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 302 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 303 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 304 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 305 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 306 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 307 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 308 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR1_CSPR
 309 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 310 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 311 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 312 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 313 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 314 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 315 #else
 316 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 317 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 318 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 319 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 320 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 321 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 322 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 323 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 324 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 325 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR
 326 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 327 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 328 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 329 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 330 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 331 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 332 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 333 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 334 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 335 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 336 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 337 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 338 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 339 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 340 #endif
 341
 342 #if defined(CONFIG_RAMBOOT_PBL)
 343 #define CONFIG_SYS_RAMBOOT
 344 #endif
 345
 346
 347 /* I2C */
 348 #define CONFIG_SYS_FSL_I2C_SPEED        100000  /* I2C speed */
 349 #define CONFIG_SYS_FSL_I2C2_SPEED       100000  /* I2C2 speed */
 350 #define I2C_MUX_PCA_ADDR_PRI            0x77 /* I2C bus multiplexer,primary */
 351 #define I2C_MUX_PCA_ADDR_SEC            0x76 /* I2C bus multiplexer,secondary */
 352
 353 #define I2C_MUX_CH_DEFAULT      0x8
 354 #define I2C_MUX_CH_VOL_MONITOR  0xa
 355 #define I2C_MUX_CH_VSC3316_FS   0xc
 356 #define I2C_MUX_CH_VSC3316_BS   0xd
 357
 358 /* Voltage monitor on channel 2*/
 359 #define I2C_VOL_MONITOR_ADDR            0x40
 360 #define I2C_VOL_MONITOR_BUS_V_OFFSET    0x2
 361 #define I2C_VOL_MONITOR_BUS_V_OVF       0x1
 362 #define I2C_VOL_MONITOR_BUS_V_SHIFT     3
 363
 364 /* VSC Crossbar switches */
 365 #define CONFIG_VSC_CROSSBAR
 366 #define VSC3316_FSM_TX_ADDR     0x70
 367 #define VSC3316_FSM_RX_ADDR     0x71
 368
 369 /*
 370  * RapidIO
 371  */
 372
 373 /*
 374  * for slave u-boot IMAGE instored in master memory space,
 375  * PHYS must be aligned based on the SIZE
 376  */
 377 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
 378 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
 379 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000       /* 1M */
 380 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
 381 /*
 382  * for slave UCODE and ENV instored in master memory space,
 383  * PHYS must be aligned based on the SIZE
 384  */
 385 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
 386 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
 387 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000    /* 256K */
 388
 389 /* slave core release by master*/
 390 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
 391 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
 392
 393 /*
 394  * SRIO_PCIE_BOOT - SLAVE
 395  */
 396 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 397 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 398 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 399                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 400 #endif
 401 /*
 402  * eSPI - Enhanced SPI
 403  */
 404 #define CONFIG_SPI_FLASH_SST
 405 #define CONFIG_CMD_SF
 406 #define CONFIG_SF_DEFAULT_SPEED         10000000
 407 #define CONFIG_SF_DEFAULT_MODE          0
 408
 409
 410 /* Qman/Bman */
 411 #ifndef CONFIG_NOBQFMAN
 412 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 413 #define CONFIG_SYS_BMAN_NUM_PORTALS     50
 414 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 415 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 416 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 417 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 418 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 419 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 420 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 421 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 422                                         CONFIG_SYS_BMAN_CENA_SIZE)
 423 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 424 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 425 #define CONFIG_SYS_QMAN_NUM_PORTALS     50
 426 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 427 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 428 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 429 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 430 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 431 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 432 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 433 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 434                                         CONFIG_SYS_QMAN_CENA_SIZE)
 435 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 436 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 437
 438 #define CONFIG_SYS_DPAA_FMAN
 439 #define CONFIG_SYS_DPAA_PME
 440 #define CONFIG_SYS_PMAN
 441 #define CONFIG_SYS_DPAA_DCE
 442 #define CONFIG_SYS_DPAA_RMAN
 443 #define CONFIG_SYS_INTERLAKEN
 444
 445 /* Default address of microcode for the Linux Fman driver */
 446 #if defined(CONFIG_SPIFLASH)
 447 /*
 448  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 449  * env, so we got 0x110000.
 450  */
 451 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 452 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 453 #elif defined(CONFIG_SDCARD)
 454 /*
 455  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 456  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 457  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
 458  */
 459 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 460 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820)
 461 #elif defined(CONFIG_NAND)
 462 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 463 #define CONFIG_SYS_FMAN_FW_ADDR (11 * CONFIG_SYS_NAND_BLOCK_SIZE)
 464 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 465 /*
 466  * Slave has no ucode locally, it can fetch this from remote. When implementing
 467  * in two corenet boards, slave's ucode could be stored in master's memory
 468  * space, the address can be mapped from slave TLB->slave LAW->
 469  * slave SRIO or PCIE outbound window->master inbound window->
 470  * master LAW->the ucode address in master's memory space.
 471  */
 472 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 473 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000
 474 #else
 475 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 476 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 477 #endif
 478 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 479 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 480 #endif /* CONFIG_NOBQFMAN */
 481
 482 #ifdef CONFIG_SYS_DPAA_FMAN
 483 #define CONFIG_FMAN_ENET
 484 #define CONFIG_PHYLIB_10G
 485 #define CONFIG_PHY_VITESSE
 486 #define CONFIG_PHY_TERANETICS
 487 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
 488 #define SGMII_CARD_PORT2_PHY_ADDR 0x1D
 489 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
 490 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F
 491 #define FM1_10GEC1_PHY_ADDR     0x0
 492 #define FM1_10GEC2_PHY_ADDR     0x1
 493 #define FM2_10GEC1_PHY_ADDR     0x2
 494 #define FM2_10GEC2_PHY_ADDR     0x3
 495 #endif
 496
 497
 498 /* SATA */
 499 #ifdef CONFIG_FSL_SATA_V2
 500 #define CONFIG_LIBATA
 501 #define CONFIG_FSL_SATA
 502
 503 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 504 #define CONFIG_SATA1
 505 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 506 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 507 #define CONFIG_SATA2
 508 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 509 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 510
 511 #define CONFIG_LBA48
 512 #define CONFIG_CMD_SATA
 513 #define CONFIG_DOS_PARTITION
 514 #define CONFIG_CMD_EXT2
 515 #endif
 516
 517 #ifdef CONFIG_FMAN_ENET
 518 #define CONFIG_MII              /* MII PHY management */
 519 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 520 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 521 #endif
 522
 523 /* Hash command with SHA acceleration supported in hardware */
 524 #ifdef CONFIG_FSL_CAAM
 525 #define CONFIG_CMD_HASH
 526 #define CONFIG_SHA_HW_ACCEL
 527 #endif
 528
 529 /*
 530 * USB
 531 */
 532 #define CONFIG_CMD_USB
 533 #define CONFIG_USB_STORAGE
 534 #define CONFIG_USB_EHCI
 535 #define CONFIG_USB_EHCI_FSL
 536 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 537 #define CONFIG_CMD_EXT2
 538 #define CONFIG_HAS_FSL_DR_USB
 539
 540 #define CONFIG_MMC
 541
 542 #ifdef CONFIG_MMC
 543 #define CONFIG_FSL_ESDHC
 544 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 545 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 546 #define CONFIG_CMD_MMC
 547 #define CONFIG_GENERIC_MMC
 548 #define CONFIG_CMD_EXT2
 549 #define CONFIG_CMD_FAT
 550 #define CONFIG_DOS_PARTITION
 551 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 552 #define CONFIG_ESDHC_DETECT_QUIRK \
 553         (!(readb(QIXIS_BASE + QIXIS_BRDCFG5) & QIXIS_MUX_SDHC) || \
 554         IS_SVR_REV(get_svr(), 1, 0))
 555 #define CONFIG_ESDHC_DETECT_8_BIT_QUIRK \
 556         (!(readb(QIXIS_BASE + QIXIS_BRDCFG5) & QIXIS_MUX_SDHC_WIDTH8))
 557 #endif
 558
 559 #define CONFIG_BOOTDELAY        10      /* -1 disables auto-boot */
 560
 561 #define __USB_PHY_TYPE  utmi
 562
 563 /*
 564  * T4240 has 3 DDR controllers. Default to 3-way interleaving. It can be
 565  * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to 2-way
 566  * interleaving. It can be cacheline, page, bank, superbank.
 567  * See doc/README.fsl-ddr for details.
 568  */
 569 #ifdef CONFIG_PPC_T4240
 570 #define CTRL_INTLV_PREFERED 3way_4KB
 571 #else
 572 #define CTRL_INTLV_PREFERED cacheline
 573 #endif
 574
 575 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 576         "hwconfig=fsl_ddr:"                                     \
 577         "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) ","      \
 578         "bank_intlv=auto;"                                      \
 579         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 580         "netdev=eth0\0"                                         \
 581         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"                     \
 582         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"             \
 583         "tftpflash=tftpboot $loadaddr $uboot && "               \
 584         "protect off $ubootaddr +$filesize && "                 \
 585         "erase $ubootaddr +$filesize && "                       \
 586         "cp.b $loadaddr $ubootaddr $filesize && "               \
 587         "protect on $ubootaddr +$filesize && "                  \
 588         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 589         "consoledev=ttyS0\0"                                    \
 590         "ramdiskaddr=2000000\0"                                 \
 591         "ramdiskfile=t4240qds/ramdisk.uboot\0"                  \
 592         "fdtaddr=c00000\0"                                      \
 593         "fdtfile=t4240qds/t4240qds.dtb\0"                               \
 594         "bdev=sda3\0"
 595
 596 #define CONFIG_HVBOOT                           \
 597         "setenv bootargs config-addr=0x60000000; "      \
 598         "bootm 0x01000000 - 0x00f00000"
 599
 600 #define CONFIG_ALU                              \
 601         "setenv bootargs root=/dev/$bdev rw "           \
 602         "console=$consoledev,$baudrate $othbootargs;"   \
 603         "cpu 1 release 0x01000000 - - -;"               \
 604         "cpu 2 release 0x01000000 - - -;"               \
 605         "cpu 3 release 0x01000000 - - -;"               \
 606         "cpu 4 release 0x01000000 - - -;"               \
 607         "cpu 5 release 0x01000000 - - -;"               \
 608         "cpu 6 release 0x01000000 - - -;"               \
 609         "cpu 7 release 0x01000000 - - -;"               \
 610         "go 0x01000000"
 611
 612 #define CONFIG_LINUX                            \
 613         "setenv bootargs root=/dev/ram rw "             \
 614         "console=$consoledev,$baudrate $othbootargs;"   \
 615         "setenv ramdiskaddr 0x02000000;"                \
 616         "setenv fdtaddr 0x00c00000;"                    \
 617         "setenv loadaddr 0x1000000;"                    \
 618         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 619
 620 #define CONFIG_HDBOOT                                   \
 621         "setenv bootargs root=/dev/$bdev rw "           \
 622         "console=$consoledev,$baudrate $othbootargs;"   \
 623         "tftp $loadaddr $bootfile;"                     \
 624         "tftp $fdtaddr $fdtfile;"                       \
 625         "bootm $loadaddr - $fdtaddr"
 626
 627 #define CONFIG_NFSBOOTCOMMAND                   \
 628         "setenv bootargs root=/dev/nfs rw "     \
 629         "nfsroot=$serverip:$rootpath "          \
 630         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 631         "console=$consoledev,$baudrate $othbootargs;"   \
 632         "tftp $loadaddr $bootfile;"             \
 633         "tftp $fdtaddr $fdtfile;"               \
 634         "bootm $loadaddr - $fdtaddr"
 635
 636 #define CONFIG_RAMBOOTCOMMAND                           \
 637         "setenv bootargs root=/dev/ram rw "             \
 638         "console=$consoledev,$baudrate $othbootargs;"   \
 639         "tftp $ramdiskaddr $ramdiskfile;"               \
 640         "tftp $loadaddr $bootfile;"                     \
 641         "tftp $fdtaddr $fdtfile;"                       \
 642         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 643
 644 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 645
 646 #include <asm/fsl_secure_boot.h>
 647
 648 #ifdef CONFIG_SECURE_BOOT
 649 #define CONFIG_CMD_BLOB
 650 #endif
 651
 652 #endif  /* __CONFIG_H */