include/configs/T4240QDS.h

   1 /*
   2  * Copyright 2011-2012 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * T4240 QDS board configuration file
   9  */
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 #define CONFIG_T4240QDS
  14
  15 #define CONFIG_FSL_SATA_V2
  16 #define CONFIG_PCIE4
  17 #define CONFIG_FSL_CAAM                 /* Enable SEC/CAAM */
  18
  19 #define CONFIG_ICS307_REFCLK_HZ         25000000  /* ICS307 ref clk freq */
  20
  21 #ifdef CONFIG_RAMBOOT_PBL
  22 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t4qds/t4_pbi.cfg
  23 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t4qds/t4_rcw.cfg
  24 #if !defined(CONFIG_NAND) && !defined(CONFIG_SDCARD)
  25 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  26 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  27 #else
  28 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
  29 #define CONFIG_SPL_SERIAL_SUPPORT
  30 #define CONFIG_SPL_FLUSH_IMAGE
  31 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  32 #define CONFIG_SPL_LIBGENERIC_SUPPORT
  33 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  34 #define CONFIG_SPL_I2C_SUPPORT
  35 #define CONFIG_FSL_LAW                 /* Use common FSL init code */
  36 #define CONFIG_SYS_TEXT_BASE            0x00201000
  37 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
  38 #define CONFIG_SPL_PAD_TO               0x40000
  39 #define CONFIG_SPL_MAX_SIZE             0x28000
  40 #define RESET_VECTOR_OFFSET             0x27FFC
  41 #define BOOT_PAGE_OFFSET                0x27000
  42
  43 #ifdef  CONFIG_NAND
  44 #define CONFIG_SPL_NAND_SUPPORT
  45 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  46 #define CONFIG_SYS_NAND_U_BOOT_DST      0x00200000
  47 #define CONFIG_SYS_NAND_U_BOOT_START    0x00200000
  48 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
  49 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  50 #define CONFIG_SPL_NAND_BOOT
  51 #endif
  52
  53 #ifdef  CONFIG_SDCARD
  54 #define CONFIG_RESET_VECTOR_ADDRESS     0x200FFC
  55 #define CONFIG_SPL_MMC_SUPPORT
  56 #define CONFIG_SPL_MMC_MINIMAL
  57 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
  58 #define CONFIG_SYS_MMC_U_BOOT_DST       0x00200000
  59 #define CONFIG_SYS_MMC_U_BOOT_START     0x00200000
  60 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
  61 #ifndef CONFIG_SPL_BUILD
  62 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  63 #endif
  64 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  65 #define CONFIG_SPL_MMC_BOOT
  66 #endif
  67
  68 #ifdef CONFIG_SPL_BUILD
  69 #define CONFIG_SPL_SKIP_RELOCATE
  70 #define CONFIG_SPL_COMMON_INIT_DDR
  71 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  72 #define CONFIG_SYS_NO_FLASH
  73 #endif
  74
  75 #endif
  76 #endif /* CONFIG_RAMBOOT_PBL */
  77
  78 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
  79 /* Set 1M boot space */
  80 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
  81 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
  82                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
  83 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
  84 #define CONFIG_SYS_NO_FLASH
  85 #endif
  86
  87 #define CONFIG_SRIO_PCIE_BOOT_MASTER
  88 #define CONFIG_DDR_ECC
  89
  90 #include "t4qds.h"
  91
  92 #ifdef CONFIG_SYS_NO_FLASH
  93 #if !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) && !defined(CONFIG_RAMBOOT_PBL)
  94 #define CONFIG_ENV_IS_NOWHERE
  95 #endif
  96 #else
  97 #define CONFIG_FLASH_CFI_DRIVER
  98 #define CONFIG_SYS_FLASH_CFI
  99 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 100 #endif
 101
 102 #if defined(CONFIG_SPIFLASH)
 103 #define CONFIG_SYS_EXTRA_ENV_RELOC
 104 #define CONFIG_ENV_IS_IN_SPI_FLASH
 105 #define CONFIG_ENV_SPI_BUS              0
 106 #define CONFIG_ENV_SPI_CS               0
 107 #define CONFIG_ENV_SPI_MAX_HZ           10000000
 108 #define CONFIG_ENV_SPI_MODE             0
 109 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 110 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 111 #define CONFIG_ENV_SECT_SIZE            0x10000
 112 #elif defined(CONFIG_SDCARD)
 113 #define CONFIG_SYS_EXTRA_ENV_RELOC
 114 #define CONFIG_ENV_IS_IN_MMC
 115 #define CONFIG_SYS_MMC_ENV_DEV          0
 116 #define CONFIG_ENV_SIZE                 0x2000
 117 #define CONFIG_ENV_OFFSET               (512 * 0x800)
 118 #elif defined(CONFIG_NAND)
 119 #define CONFIG_SYS_EXTRA_ENV_RELOC
 120 #define CONFIG_ENV_IS_IN_NAND
 121 #define CONFIG_ENV_SIZE                 0x2000
 122 #define CONFIG_ENV_OFFSET               (10 * CONFIG_SYS_NAND_BLOCK_SIZE)
 123 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 124 #define CONFIG_ENV_IS_IN_REMOTE
 125 #define CONFIG_ENV_ADDR         0xffe20000
 126 #define CONFIG_ENV_SIZE         0x2000
 127 #elif defined(CONFIG_ENV_IS_NOWHERE)
 128 #define CONFIG_ENV_SIZE         0x2000
 129 #else
 130 #define CONFIG_ENV_IS_IN_FLASH
 131 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 132 #define CONFIG_ENV_SIZE         0x2000
 133 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 134 #endif
 135
 136 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk()
 137 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk()
 138
 139 #ifndef __ASSEMBLY__
 140 unsigned long get_board_sys_clk(void);
 141 unsigned long get_board_ddr_clk(void);
 142 #endif
 143
 144 /* EEPROM */
 145 #define CONFIG_ID_EEPROM
 146 #define CONFIG_SYS_I2C_EEPROM_NXID
 147 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 148 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 149 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 150
 151 /*
 152  * DDR Setup
 153  */
 154 #define CONFIG_SYS_SPD_BUS_NUM  0
 155 #define SPD_EEPROM_ADDRESS1     0x51
 156 #define SPD_EEPROM_ADDRESS2     0x52
 157 #define SPD_EEPROM_ADDRESS3     0x53
 158 #define SPD_EEPROM_ADDRESS4     0x54
 159 #define SPD_EEPROM_ADDRESS5     0x55
 160 #define SPD_EEPROM_ADDRESS6     0x56
 161 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1     /* for p3041/p5010 */
 162 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 163
 164 /*
 165  * IFC Definitions
 166  */
 167 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 168 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 169                                 + 0x8000000) | \
 170                                 CSPR_PORT_SIZE_16 | \
 171                                 CSPR_MSEL_NOR | \
 172                                 CSPR_V)
 173 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 174 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 175                                 CSPR_PORT_SIZE_16 | \
 176                                 CSPR_MSEL_NOR | \
 177                                 CSPR_V)
 178 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 179 /* NOR Flash Timing Params */
 180 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 181
 182 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 183                                 FTIM0_NOR_TEADC(0x5) | \
 184                                 FTIM0_NOR_TEAHC(0x5))
 185 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 186                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 187                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 188 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 189                                 FTIM2_NOR_TCH(0x4) | \
 190                                 FTIM2_NOR_TWPH(0x0E) | \
 191                                 FTIM2_NOR_TWP(0x1c))
 192 #define CONFIG_SYS_NOR_FTIM3    0x0
 193
 194 #define CONFIG_SYS_FLASH_QUIET_TEST
 195 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 196
 197 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 198 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 199 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 200 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 201
 202 #define CONFIG_SYS_FLASH_EMPTY_INFO
 203 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 204                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 205
 206 #define CONFIG_FSL_QIXIS        /* use common QIXIS code */
 207 #define QIXIS_BASE                      0xffdf0000
 208 #define QIXIS_LBMAP_SWITCH              6
 209 #define QIXIS_LBMAP_MASK                0x0f
 210 #define QIXIS_LBMAP_SHIFT               0
 211 #define QIXIS_LBMAP_DFLTBANK            0x00
 212 #define QIXIS_LBMAP_ALTBANK             0x04
 213 #define QIXIS_RST_CTL_RESET             0x83
 214 #define QIXIS_RST_FORCE_MEM             0x1
 215 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 216 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 217 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 218 #define QIXIS_BRDCFG5                   0x55
 219 #define QIXIS_MUX_SDHC                  2
 220 #define QIXIS_MUX_SDHC_WIDTH8           1
 221 #define QIXIS_BASE_PHYS         (0xf00000000ull | QIXIS_BASE)
 222
 223 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 224 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
 225                                 | CSPR_PORT_SIZE_8 \
 226                                 | CSPR_MSEL_GPCM \
 227                                 | CSPR_V)
 228 #define CONFIG_SYS_AMASK3       IFC_AMASK(4*1024)
 229 #define CONFIG_SYS_CSOR3        0x0
 230 /* QIXIS Timing parameters for IFC CS3 */
 231 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 232                                         FTIM0_GPCM_TEADC(0x0e) | \
 233                                         FTIM0_GPCM_TEAHC(0x0e))
 234 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0xff) | \
 235                                         FTIM1_GPCM_TRAD(0x3f))
 236 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 237                                         FTIM2_GPCM_TCH(0x8) | \
 238                                         FTIM2_GPCM_TWP(0x1f))
 239 #define CONFIG_SYS_CS3_FTIM3            0x0
 240
 241 /* NAND Flash on IFC */
 242 #define CONFIG_NAND_FSL_IFC
 243 #define CONFIG_SYS_NAND_BASE            0xff800000
 244 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 245
 246 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 247 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 248                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 249                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 250                                 | CSPR_V)
 251 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 252
 253 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 254                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 255                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 256                                 | CSOR_NAND_RAL_3       /* RAL = 2Byes */ \
 257                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 258                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
 259                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 260
 261 #define CONFIG_SYS_NAND_ONFI_DETECTION
 262
 263 /* ONFI NAND Flash mode0 Timing Params */
 264 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 265                                         FTIM0_NAND_TWP(0x18)   | \
 266                                         FTIM0_NAND_TWCHT(0x07) | \
 267                                         FTIM0_NAND_TWH(0x0a))
 268 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 269                                         FTIM1_NAND_TWBE(0x39)  | \
 270                                         FTIM1_NAND_TRR(0x0e)   | \
 271                                         FTIM1_NAND_TRP(0x18))
 272 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 273                                         FTIM2_NAND_TREH(0x0a) | \
 274                                         FTIM2_NAND_TWHRE(0x1e))
 275 #define CONFIG_SYS_NAND_FTIM3           0x0
 276
 277 #define CONFIG_SYS_NAND_DDR_LAW         11
 278
 279 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 280 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 281 #define CONFIG_CMD_NAND
 282
 283 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 284 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
 285 #define CONFIG_SYS_NAND_MAX_ECCPOS      256
 286
 287 #if defined(CONFIG_NAND)
 288 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 289 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 290 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 291 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 292 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 293 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 294 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 295 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 296 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 297 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR0_CSPR
 298 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 299 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 300 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 301 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 302 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 303 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 304 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 305 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR1_CSPR
 306 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 307 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 308 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 309 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 310 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 311 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 312 #else
 313 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 314 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 315 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 316 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 317 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 318 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 319 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 320 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 321 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 322 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR
 323 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 324 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 325 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 326 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 327 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 328 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 329 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 330 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 331 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 332 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 333 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 334 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 335 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 336 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 337 #endif
 338
 339 #if defined(CONFIG_RAMBOOT_PBL)
 340 #define CONFIG_SYS_RAMBOOT
 341 #endif
 342
 343 /* I2C */
 344 #define CONFIG_SYS_FSL_I2C_SPEED        100000  /* I2C speed */
 345 #define CONFIG_SYS_FSL_I2C2_SPEED       100000  /* I2C2 speed */
 346 #define I2C_MUX_PCA_ADDR_PRI            0x77 /* I2C bus multiplexer,primary */
 347 #define I2C_MUX_PCA_ADDR_SEC            0x76 /* I2C bus multiplexer,secondary */
 348
 349 #define I2C_MUX_CH_DEFAULT      0x8
 350 #define I2C_MUX_CH_VOL_MONITOR  0xa
 351 #define I2C_MUX_CH_VSC3316_FS   0xc
 352 #define I2C_MUX_CH_VSC3316_BS   0xd
 353
 354 /* Voltage monitor on channel 2*/
 355 #define I2C_VOL_MONITOR_ADDR            0x40
 356 #define I2C_VOL_MONITOR_BUS_V_OFFSET    0x2
 357 #define I2C_VOL_MONITOR_BUS_V_OVF       0x1
 358 #define I2C_VOL_MONITOR_BUS_V_SHIFT     3
 359
 360 /* VSC Crossbar switches */
 361 #define CONFIG_VSC_CROSSBAR
 362 #define VSC3316_FSM_TX_ADDR     0x70
 363 #define VSC3316_FSM_RX_ADDR     0x71
 364
 365 /*
 366  * RapidIO
 367  */
 368
 369 /*
 370  * for slave u-boot IMAGE instored in master memory space,
 371  * PHYS must be aligned based on the SIZE
 372  */
 373 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
 374 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
 375 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000       /* 1M */
 376 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
 377 /*
 378  * for slave UCODE and ENV instored in master memory space,
 379  * PHYS must be aligned based on the SIZE
 380  */
 381 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
 382 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
 383 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000    /* 256K */
 384
 385 /* slave core release by master*/
 386 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
 387 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
 388
 389 /*
 390  * SRIO_PCIE_BOOT - SLAVE
 391  */
 392 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 393 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 394 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 395                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 396 #endif
 397 /*
 398  * eSPI - Enhanced SPI
 399  */
 400 #define CONFIG_SF_DEFAULT_SPEED         10000000
 401 #define CONFIG_SF_DEFAULT_MODE          0
 402
 403 /* Qman/Bman */
 404 #ifndef CONFIG_NOBQFMAN
 405 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 406 #define CONFIG_SYS_BMAN_NUM_PORTALS     50
 407 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 408 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 409 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 410 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 411 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 412 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 413 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 414 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 415                                         CONFIG_SYS_BMAN_CENA_SIZE)
 416 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 417 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 418 #define CONFIG_SYS_QMAN_NUM_PORTALS     50
 419 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 420 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 421 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 422 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 423 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 424 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 425 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 426 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 427                                         CONFIG_SYS_QMAN_CENA_SIZE)
 428 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 429 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 430
 431 #define CONFIG_SYS_DPAA_FMAN
 432 #define CONFIG_SYS_DPAA_PME
 433 #define CONFIG_SYS_PMAN
 434 #define CONFIG_SYS_DPAA_DCE
 435 #define CONFIG_SYS_DPAA_RMAN
 436 #define CONFIG_SYS_INTERLAKEN
 437
 438 /* Default address of microcode for the Linux Fman driver */
 439 #if defined(CONFIG_SPIFLASH)
 440 /*
 441  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 442  * env, so we got 0x110000.
 443  */
 444 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 445 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 446 #elif defined(CONFIG_SDCARD)
 447 /*
 448  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 449  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 450  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
 451  */
 452 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 453 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820)
 454 #elif defined(CONFIG_NAND)
 455 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 456 #define CONFIG_SYS_FMAN_FW_ADDR (11 * CONFIG_SYS_NAND_BLOCK_SIZE)
 457 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 458 /*
 459  * Slave has no ucode locally, it can fetch this from remote. When implementing
 460  * in two corenet boards, slave's ucode could be stored in master's memory
 461  * space, the address can be mapped from slave TLB->slave LAW->
 462  * slave SRIO or PCIE outbound window->master inbound window->
 463  * master LAW->the ucode address in master's memory space.
 464  */
 465 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 466 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000
 467 #else
 468 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 469 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 470 #endif
 471 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 472 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 473 #endif /* CONFIG_NOBQFMAN */
 474
 475 #ifdef CONFIG_SYS_DPAA_FMAN
 476 #define CONFIG_FMAN_ENET
 477 #define CONFIG_PHYLIB_10G
 478 #define CONFIG_PHY_VITESSE
 479 #define CONFIG_PHY_TERANETICS
 480 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
 481 #define SGMII_CARD_PORT2_PHY_ADDR 0x1D
 482 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
 483 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F
 484 #define FM1_10GEC1_PHY_ADDR     0x0
 485 #define FM1_10GEC2_PHY_ADDR     0x1
 486 #define FM2_10GEC1_PHY_ADDR     0x2
 487 #define FM2_10GEC2_PHY_ADDR     0x3
 488 #endif
 489
 490 /* SATA */
 491 #ifdef CONFIG_FSL_SATA_V2
 492 #define CONFIG_LIBATA
 493 #define CONFIG_FSL_SATA
 494
 495 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 496 #define CONFIG_SATA1
 497 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 498 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 499 #define CONFIG_SATA2
 500 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 501 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 502
 503 #define CONFIG_LBA48
 504 #define CONFIG_CMD_SATA
 505 #define CONFIG_DOS_PARTITION
 506 #endif
 507
 508 #ifdef CONFIG_FMAN_ENET
 509 #define CONFIG_MII              /* MII PHY management */
 510 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 511 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 512 #endif
 513
 514 /* Hash command with SHA acceleration supported in hardware */
 515 #ifdef CONFIG_FSL_CAAM
 516 #define CONFIG_CMD_HASH
 517 #define CONFIG_SHA_HW_ACCEL
 518 #endif
 519
 520 /*
 521 * USB
 522 */
 523 #define CONFIG_USB_EHCI
 524 #define CONFIG_USB_EHCI_FSL
 525 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 526 #define CONFIG_HAS_FSL_DR_USB
 527
 528 #define CONFIG_MMC
 529
 530 #ifdef CONFIG_MMC
 531 #define CONFIG_FSL_ESDHC
 532 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 533 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 534 #define CONFIG_GENERIC_MMC
 535 #define CONFIG_DOS_PARTITION
 536 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 537 #define CONFIG_ESDHC_DETECT_QUIRK \
 538         (!(readb(QIXIS_BASE + QIXIS_BRDCFG5) & QIXIS_MUX_SDHC) || \
 539         IS_SVR_REV(get_svr(), 1, 0))
 540 #define CONFIG_ESDHC_DETECT_8_BIT_QUIRK \
 541         (!(readb(QIXIS_BASE + QIXIS_BRDCFG5) & QIXIS_MUX_SDHC_WIDTH8))
 542 #endif
 543
 544
 545 #define __USB_PHY_TYPE  utmi
 546
 547 /*
 548  * T4240 has 3 DDR controllers. Default to 3-way interleaving. It can be
 549  * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to 2-way
 550  * interleaving. It can be cacheline, page, bank, superbank.
 551  * See doc/README.fsl-ddr for details.
 552  */
 553 #ifdef CONFIG_PPC_T4240
 554 #define CTRL_INTLV_PREFERED 3way_4KB
 555 #else
 556 #define CTRL_INTLV_PREFERED cacheline
 557 #endif
 558
 559 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 560         "hwconfig=fsl_ddr:"                                     \
 561         "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) ","      \
 562         "bank_intlv=auto;"                                      \
 563         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 564         "netdev=eth0\0"                                         \
 565         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"                     \
 566         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"             \
 567         "tftpflash=tftpboot $loadaddr $uboot && "               \
 568         "protect off $ubootaddr +$filesize && "                 \
 569         "erase $ubootaddr +$filesize && "                       \
 570         "cp.b $loadaddr $ubootaddr $filesize && "               \
 571         "protect on $ubootaddr +$filesize && "                  \
 572         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 573         "consoledev=ttyS0\0"                                    \
 574         "ramdiskaddr=2000000\0"                                 \
 575         "ramdiskfile=t4240qds/ramdisk.uboot\0"                  \
 576         "fdtaddr=1e00000\0"                                     \
 577         "fdtfile=t4240qds/t4240qds.dtb\0"                               \
 578         "bdev=sda3\0"
 579
 580 #define CONFIG_HVBOOT                           \
 581         "setenv bootargs config-addr=0x60000000; "      \
 582         "bootm 0x01000000 - 0x00f00000"
 583
 584 #define CONFIG_ALU                              \
 585         "setenv bootargs root=/dev/$bdev rw "           \
 586         "console=$consoledev,$baudrate $othbootargs;"   \
 587         "cpu 1 release 0x01000000 - - -;"               \
 588         "cpu 2 release 0x01000000 - - -;"               \
 589         "cpu 3 release 0x01000000 - - -;"               \
 590         "cpu 4 release 0x01000000 - - -;"               \
 591         "cpu 5 release 0x01000000 - - -;"               \
 592         "cpu 6 release 0x01000000 - - -;"               \
 593         "cpu 7 release 0x01000000 - - -;"               \
 594         "go 0x01000000"
 595
 596 #define CONFIG_LINUX                            \
 597         "setenv bootargs root=/dev/ram rw "             \
 598         "console=$consoledev,$baudrate $othbootargs;"   \
 599         "setenv ramdiskaddr 0x02000000;"                \
 600         "setenv fdtaddr 0x00c00000;"                    \
 601         "setenv loadaddr 0x1000000;"                    \
 602         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 603
 604 #define CONFIG_HDBOOT                                   \
 605         "setenv bootargs root=/dev/$bdev rw "           \
 606         "console=$consoledev,$baudrate $othbootargs;"   \
 607         "tftp $loadaddr $bootfile;"                     \
 608         "tftp $fdtaddr $fdtfile;"                       \
 609         "bootm $loadaddr - $fdtaddr"
 610
 611 #define CONFIG_NFSBOOTCOMMAND                   \
 612         "setenv bootargs root=/dev/nfs rw "     \
 613         "nfsroot=$serverip:$rootpath "          \
 614         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 615         "console=$consoledev,$baudrate $othbootargs;"   \
 616         "tftp $loadaddr $bootfile;"             \
 617         "tftp $fdtaddr $fdtfile;"               \
 618         "bootm $loadaddr - $fdtaddr"
 619
 620 #define CONFIG_RAMBOOTCOMMAND                           \
 621         "setenv bootargs root=/dev/ram rw "             \
 622         "console=$consoledev,$baudrate $othbootargs;"   \
 623         "tftp $ramdiskaddr $ramdiskfile;"               \
 624         "tftp $loadaddr $bootfile;"                     \
 625         "tftp $fdtaddr $fdtfile;"                       \
 626         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 627
 628 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 629
 630 #include <asm/fsl_secure_boot.h>
 631
 632 #endif  /* __CONFIG_H */