include/configs/T4240QDS.h

   1 /*
   2  * Copyright 2011-2012 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * T4240 QDS board configuration file
   9  */
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 #define CONFIG_T4240QDS
  14
  15 #define CONFIG_FSL_SATA_V2
  16 #define CONFIG_PCIE4
  17 #define CONFIG_FSL_CAAM                 /* Enable SEC/CAAM */
  18
  19 #define CONFIG_ICS307_REFCLK_HZ         25000000  /* ICS307 ref clk freq */
  20
  21 #ifdef CONFIG_RAMBOOT_PBL
  22 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t4qds/t4_pbi.cfg
  23 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t4qds/t4_rcw.cfg
  24 #if !defined(CONFIG_NAND) && !defined(CONFIG_SDCARD)
  25 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  26 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  27 #else
  28 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
  29 #define CONFIG_SPL_SERIAL_SUPPORT
  30 #define CONFIG_SPL_FLUSH_IMAGE
  31 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  32 #define CONFIG_SPL_LIBGENERIC_SUPPORT
  33 #define CONFIG_FSL_LAW                 /* Use common FSL init code */
  34 #define CONFIG_SYS_TEXT_BASE            0x00201000
  35 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
  36 #define CONFIG_SPL_PAD_TO               0x40000
  37 #define CONFIG_SPL_MAX_SIZE             0x28000
  38 #define RESET_VECTOR_OFFSET             0x27FFC
  39 #define BOOT_PAGE_OFFSET                0x27000
  40
  41 #ifdef  CONFIG_NAND
  42 #define CONFIG_SPL_NAND_SUPPORT
  43 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  44 #define CONFIG_SYS_NAND_U_BOOT_DST      0x00200000
  45 #define CONFIG_SYS_NAND_U_BOOT_START    0x00200000
  46 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
  47 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  48 #define CONFIG_SPL_NAND_BOOT
  49 #endif
  50
  51 #ifdef  CONFIG_SDCARD
  52 #define CONFIG_RESET_VECTOR_ADDRESS     0x200FFC
  53 #define CONFIG_SPL_MMC_SUPPORT
  54 #define CONFIG_SPL_MMC_MINIMAL
  55 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
  56 #define CONFIG_SYS_MMC_U_BOOT_DST       0x00200000
  57 #define CONFIG_SYS_MMC_U_BOOT_START     0x00200000
  58 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
  59 #ifndef CONFIG_SPL_BUILD
  60 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  61 #endif
  62 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  63 #define CONFIG_SPL_MMC_BOOT
  64 #endif
  65
  66 #ifdef CONFIG_SPL_BUILD
  67 #define CONFIG_SPL_SKIP_RELOCATE
  68 #define CONFIG_SPL_COMMON_INIT_DDR
  69 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  70 #define CONFIG_SYS_NO_FLASH
  71 #endif
  72
  73 #endif
  74 #endif /* CONFIG_RAMBOOT_PBL */
  75
  76 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
  77 /* Set 1M boot space */
  78 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
  79 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
  80                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
  81 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
  82 #define CONFIG_SYS_NO_FLASH
  83 #endif
  84
  85 #define CONFIG_SRIO_PCIE_BOOT_MASTER
  86 #define CONFIG_DDR_ECC
  87
  88 #include "t4qds.h"
  89
  90 #ifdef CONFIG_SYS_NO_FLASH
  91 #if !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) && !defined(CONFIG_RAMBOOT_PBL)
  92 #define CONFIG_ENV_IS_NOWHERE
  93 #endif
  94 #else
  95 #define CONFIG_FLASH_CFI_DRIVER
  96 #define CONFIG_SYS_FLASH_CFI
  97 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
  98 #endif
  99
 100 #if defined(CONFIG_SPIFLASH)
 101 #define CONFIG_SYS_EXTRA_ENV_RELOC
 102 #define CONFIG_ENV_IS_IN_SPI_FLASH
 103 #define CONFIG_ENV_SPI_BUS              0
 104 #define CONFIG_ENV_SPI_CS               0
 105 #define CONFIG_ENV_SPI_MAX_HZ           10000000
 106 #define CONFIG_ENV_SPI_MODE             0
 107 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 108 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 109 #define CONFIG_ENV_SECT_SIZE            0x10000
 110 #elif defined(CONFIG_SDCARD)
 111 #define CONFIG_SYS_EXTRA_ENV_RELOC
 112 #define CONFIG_ENV_IS_IN_MMC
 113 #define CONFIG_SYS_MMC_ENV_DEV          0
 114 #define CONFIG_ENV_SIZE                 0x2000
 115 #define CONFIG_ENV_OFFSET               (512 * 0x800)
 116 #elif defined(CONFIG_NAND)
 117 #define CONFIG_SYS_EXTRA_ENV_RELOC
 118 #define CONFIG_ENV_IS_IN_NAND
 119 #define CONFIG_ENV_SIZE                 0x2000
 120 #define CONFIG_ENV_OFFSET               (10 * CONFIG_SYS_NAND_BLOCK_SIZE)
 121 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 122 #define CONFIG_ENV_IS_IN_REMOTE
 123 #define CONFIG_ENV_ADDR         0xffe20000
 124 #define CONFIG_ENV_SIZE         0x2000
 125 #elif defined(CONFIG_ENV_IS_NOWHERE)
 126 #define CONFIG_ENV_SIZE         0x2000
 127 #else
 128 #define CONFIG_ENV_IS_IN_FLASH
 129 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 130 #define CONFIG_ENV_SIZE         0x2000
 131 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 132 #endif
 133
 134 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk()
 135 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk()
 136
 137 #ifndef __ASSEMBLY__
 138 unsigned long get_board_sys_clk(void);
 139 unsigned long get_board_ddr_clk(void);
 140 #endif
 141
 142 /* EEPROM */
 143 #define CONFIG_ID_EEPROM
 144 #define CONFIG_SYS_I2C_EEPROM_NXID
 145 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 146 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 147 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 148
 149 /*
 150  * DDR Setup
 151  */
 152 #define CONFIG_SYS_SPD_BUS_NUM  0
 153 #define SPD_EEPROM_ADDRESS1     0x51
 154 #define SPD_EEPROM_ADDRESS2     0x52
 155 #define SPD_EEPROM_ADDRESS3     0x53
 156 #define SPD_EEPROM_ADDRESS4     0x54
 157 #define SPD_EEPROM_ADDRESS5     0x55
 158 #define SPD_EEPROM_ADDRESS6     0x56
 159 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1     /* for p3041/p5010 */
 160 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 161
 162 /*
 163  * IFC Definitions
 164  */
 165 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 166 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 167                                 + 0x8000000) | \
 168                                 CSPR_PORT_SIZE_16 | \
 169                                 CSPR_MSEL_NOR | \
 170                                 CSPR_V)
 171 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 172 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 173                                 CSPR_PORT_SIZE_16 | \
 174                                 CSPR_MSEL_NOR | \
 175                                 CSPR_V)
 176 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 177 /* NOR Flash Timing Params */
 178 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 179
 180 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 181                                 FTIM0_NOR_TEADC(0x5) | \
 182                                 FTIM0_NOR_TEAHC(0x5))
 183 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 184                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 185                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 186 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 187                                 FTIM2_NOR_TCH(0x4) | \
 188                                 FTIM2_NOR_TWPH(0x0E) | \
 189                                 FTIM2_NOR_TWP(0x1c))
 190 #define CONFIG_SYS_NOR_FTIM3    0x0
 191
 192 #define CONFIG_SYS_FLASH_QUIET_TEST
 193 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 194
 195 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 196 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 197 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 198 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 199
 200 #define CONFIG_SYS_FLASH_EMPTY_INFO
 201 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 202                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 203
 204 #define CONFIG_FSL_QIXIS        /* use common QIXIS code */
 205 #define QIXIS_BASE                      0xffdf0000
 206 #define QIXIS_LBMAP_SWITCH              6
 207 #define QIXIS_LBMAP_MASK                0x0f
 208 #define QIXIS_LBMAP_SHIFT               0
 209 #define QIXIS_LBMAP_DFLTBANK            0x00
 210 #define QIXIS_LBMAP_ALTBANK             0x04
 211 #define QIXIS_RST_CTL_RESET             0x83
 212 #define QIXIS_RST_FORCE_MEM             0x1
 213 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 214 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 215 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 216 #define QIXIS_BRDCFG5                   0x55
 217 #define QIXIS_MUX_SDHC                  2
 218 #define QIXIS_MUX_SDHC_WIDTH8           1
 219 #define QIXIS_BASE_PHYS         (0xf00000000ull | QIXIS_BASE)
 220
 221 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 222 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
 223                                 | CSPR_PORT_SIZE_8 \
 224                                 | CSPR_MSEL_GPCM \
 225                                 | CSPR_V)
 226 #define CONFIG_SYS_AMASK3       IFC_AMASK(4*1024)
 227 #define CONFIG_SYS_CSOR3        0x0
 228 /* QIXIS Timing parameters for IFC CS3 */
 229 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 230                                         FTIM0_GPCM_TEADC(0x0e) | \
 231                                         FTIM0_GPCM_TEAHC(0x0e))
 232 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0xff) | \
 233                                         FTIM1_GPCM_TRAD(0x3f))
 234 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 235                                         FTIM2_GPCM_TCH(0x8) | \
 236                                         FTIM2_GPCM_TWP(0x1f))
 237 #define CONFIG_SYS_CS3_FTIM3            0x0
 238
 239 /* NAND Flash on IFC */
 240 #define CONFIG_NAND_FSL_IFC
 241 #define CONFIG_SYS_NAND_BASE            0xff800000
 242 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 243
 244 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 245 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 246                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 247                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 248                                 | CSPR_V)
 249 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 250
 251 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 252                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 253                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 254                                 | CSOR_NAND_RAL_3       /* RAL = 2Byes */ \
 255                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 256                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
 257                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 258
 259 #define CONFIG_SYS_NAND_ONFI_DETECTION
 260
 261 /* ONFI NAND Flash mode0 Timing Params */
 262 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 263                                         FTIM0_NAND_TWP(0x18)   | \
 264                                         FTIM0_NAND_TWCHT(0x07) | \
 265                                         FTIM0_NAND_TWH(0x0a))
 266 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 267                                         FTIM1_NAND_TWBE(0x39)  | \
 268                                         FTIM1_NAND_TRR(0x0e)   | \
 269                                         FTIM1_NAND_TRP(0x18))
 270 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 271                                         FTIM2_NAND_TREH(0x0a) | \
 272                                         FTIM2_NAND_TWHRE(0x1e))
 273 #define CONFIG_SYS_NAND_FTIM3           0x0
 274
 275 #define CONFIG_SYS_NAND_DDR_LAW         11
 276
 277 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 278 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 279 #define CONFIG_CMD_NAND
 280
 281 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 282 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
 283 #define CONFIG_SYS_NAND_MAX_ECCPOS      256
 284
 285 #if defined(CONFIG_NAND)
 286 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 287 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 288 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 289 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 290 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 291 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 292 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 293 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 294 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 295 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR0_CSPR
 296 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 297 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 298 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 299 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 300 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 301 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 302 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 303 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR1_CSPR
 304 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 305 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 306 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 307 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 308 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 309 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 310 #else
 311 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 312 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 313 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 314 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 315 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 316 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 317 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 318 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 319 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 320 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR
 321 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 322 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 323 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 324 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 325 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 326 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 327 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 328 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 329 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 330 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 331 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 332 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 333 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 334 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 335 #endif
 336
 337 #if defined(CONFIG_RAMBOOT_PBL)
 338 #define CONFIG_SYS_RAMBOOT
 339 #endif
 340
 341 /* I2C */
 342 #define CONFIG_SYS_FSL_I2C_SPEED        100000  /* I2C speed */
 343 #define CONFIG_SYS_FSL_I2C2_SPEED       100000  /* I2C2 speed */
 344 #define I2C_MUX_PCA_ADDR_PRI            0x77 /* I2C bus multiplexer,primary */
 345 #define I2C_MUX_PCA_ADDR_SEC            0x76 /* I2C bus multiplexer,secondary */
 346
 347 #define I2C_MUX_CH_DEFAULT      0x8
 348 #define I2C_MUX_CH_VOL_MONITOR  0xa
 349 #define I2C_MUX_CH_VSC3316_FS   0xc
 350 #define I2C_MUX_CH_VSC3316_BS   0xd
 351
 352 /* Voltage monitor on channel 2*/
 353 #define I2C_VOL_MONITOR_ADDR            0x40
 354 #define I2C_VOL_MONITOR_BUS_V_OFFSET    0x2
 355 #define I2C_VOL_MONITOR_BUS_V_OVF       0x1
 356 #define I2C_VOL_MONITOR_BUS_V_SHIFT     3
 357
 358 /* VSC Crossbar switches */
 359 #define CONFIG_VSC_CROSSBAR
 360 #define VSC3316_FSM_TX_ADDR     0x70
 361 #define VSC3316_FSM_RX_ADDR     0x71
 362
 363 /*
 364  * RapidIO
 365  */
 366
 367 /*
 368  * for slave u-boot IMAGE instored in master memory space,
 369  * PHYS must be aligned based on the SIZE
 370  */
 371 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
 372 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
 373 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000       /* 1M */
 374 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
 375 /*
 376  * for slave UCODE and ENV instored in master memory space,
 377  * PHYS must be aligned based on the SIZE
 378  */
 379 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
 380 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
 381 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000    /* 256K */
 382
 383 /* slave core release by master*/
 384 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
 385 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
 386
 387 /*
 388  * SRIO_PCIE_BOOT - SLAVE
 389  */
 390 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 391 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 392 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 393                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 394 #endif
 395 /*
 396  * eSPI - Enhanced SPI
 397  */
 398 #define CONFIG_SF_DEFAULT_SPEED         10000000
 399 #define CONFIG_SF_DEFAULT_MODE          0
 400
 401 /* Qman/Bman */
 402 #ifndef CONFIG_NOBQFMAN
 403 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 404 #define CONFIG_SYS_BMAN_NUM_PORTALS     50
 405 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 406 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 407 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 408 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 409 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 410 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 411 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 412 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 413                                         CONFIG_SYS_BMAN_CENA_SIZE)
 414 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 415 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 416 #define CONFIG_SYS_QMAN_NUM_PORTALS     50
 417 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 418 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 419 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 420 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 421 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 422 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 423 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 424 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 425                                         CONFIG_SYS_QMAN_CENA_SIZE)
 426 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 427 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 428
 429 #define CONFIG_SYS_DPAA_FMAN
 430 #define CONFIG_SYS_DPAA_PME
 431 #define CONFIG_SYS_PMAN
 432 #define CONFIG_SYS_DPAA_DCE
 433 #define CONFIG_SYS_DPAA_RMAN
 434 #define CONFIG_SYS_INTERLAKEN
 435
 436 /* Default address of microcode for the Linux Fman driver */
 437 #if defined(CONFIG_SPIFLASH)
 438 /*
 439  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 440  * env, so we got 0x110000.
 441  */
 442 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 443 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 444 #elif defined(CONFIG_SDCARD)
 445 /*
 446  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 447  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 448  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
 449  */
 450 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 451 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820)
 452 #elif defined(CONFIG_NAND)
 453 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 454 #define CONFIG_SYS_FMAN_FW_ADDR (11 * CONFIG_SYS_NAND_BLOCK_SIZE)
 455 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 456 /*
 457  * Slave has no ucode locally, it can fetch this from remote. When implementing
 458  * in two corenet boards, slave's ucode could be stored in master's memory
 459  * space, the address can be mapped from slave TLB->slave LAW->
 460  * slave SRIO or PCIE outbound window->master inbound window->
 461  * master LAW->the ucode address in master's memory space.
 462  */
 463 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 464 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000
 465 #else
 466 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 467 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 468 #endif
 469 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 470 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 471 #endif /* CONFIG_NOBQFMAN */
 472
 473 #ifdef CONFIG_SYS_DPAA_FMAN
 474 #define CONFIG_FMAN_ENET
 475 #define CONFIG_PHYLIB_10G
 476 #define CONFIG_PHY_VITESSE
 477 #define CONFIG_PHY_TERANETICS
 478 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
 479 #define SGMII_CARD_PORT2_PHY_ADDR 0x1D
 480 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
 481 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F
 482 #define FM1_10GEC1_PHY_ADDR     0x0
 483 #define FM1_10GEC2_PHY_ADDR     0x1
 484 #define FM2_10GEC1_PHY_ADDR     0x2
 485 #define FM2_10GEC2_PHY_ADDR     0x3
 486 #endif
 487
 488 /* SATA */
 489 #ifdef CONFIG_FSL_SATA_V2
 490 #define CONFIG_LIBATA
 491 #define CONFIG_FSL_SATA
 492
 493 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 494 #define CONFIG_SATA1
 495 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 496 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 497 #define CONFIG_SATA2
 498 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 499 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 500
 501 #define CONFIG_LBA48
 502 #define CONFIG_CMD_SATA
 503 #define CONFIG_DOS_PARTITION
 504 #endif
 505
 506 #ifdef CONFIG_FMAN_ENET
 507 #define CONFIG_MII              /* MII PHY management */
 508 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 509 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 510 #endif
 511
 512 /* Hash command with SHA acceleration supported in hardware */
 513 #ifdef CONFIG_FSL_CAAM
 514 #define CONFIG_CMD_HASH
 515 #define CONFIG_SHA_HW_ACCEL
 516 #endif
 517
 518 /*
 519 * USB
 520 */
 521 #define CONFIG_USB_EHCI
 522 #define CONFIG_USB_EHCI_FSL
 523 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 524 #define CONFIG_HAS_FSL_DR_USB
 525
 526 #define CONFIG_MMC
 527
 528 #ifdef CONFIG_MMC
 529 #define CONFIG_FSL_ESDHC
 530 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 531 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 532 #define CONFIG_GENERIC_MMC
 533 #define CONFIG_DOS_PARTITION
 534 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 535 #define CONFIG_ESDHC_DETECT_QUIRK \
 536         (!(readb(QIXIS_BASE + QIXIS_BRDCFG5) & QIXIS_MUX_SDHC) || \
 537         IS_SVR_REV(get_svr(), 1, 0))
 538 #define CONFIG_ESDHC_DETECT_8_BIT_QUIRK \
 539         (!(readb(QIXIS_BASE + QIXIS_BRDCFG5) & QIXIS_MUX_SDHC_WIDTH8))
 540 #endif
 541
 542
 543 #define __USB_PHY_TYPE  utmi
 544
 545 /*
 546  * T4240 has 3 DDR controllers. Default to 3-way interleaving. It can be
 547  * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to 2-way
 548  * interleaving. It can be cacheline, page, bank, superbank.
 549  * See doc/README.fsl-ddr for details.
 550  */
 551 #ifdef CONFIG_PPC_T4240
 552 #define CTRL_INTLV_PREFERED 3way_4KB
 553 #else
 554 #define CTRL_INTLV_PREFERED cacheline
 555 #endif
 556
 557 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 558         "hwconfig=fsl_ddr:"                                     \
 559         "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) ","      \
 560         "bank_intlv=auto;"                                      \
 561         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 562         "netdev=eth0\0"                                         \
 563         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"                     \
 564         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"             \
 565         "tftpflash=tftpboot $loadaddr $uboot && "               \
 566         "protect off $ubootaddr +$filesize && "                 \
 567         "erase $ubootaddr +$filesize && "                       \
 568         "cp.b $loadaddr $ubootaddr $filesize && "               \
 569         "protect on $ubootaddr +$filesize && "                  \
 570         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 571         "consoledev=ttyS0\0"                                    \
 572         "ramdiskaddr=2000000\0"                                 \
 573         "ramdiskfile=t4240qds/ramdisk.uboot\0"                  \
 574         "fdtaddr=1e00000\0"                                     \
 575         "fdtfile=t4240qds/t4240qds.dtb\0"                               \
 576         "bdev=sda3\0"
 577
 578 #define CONFIG_HVBOOT                           \
 579         "setenv bootargs config-addr=0x60000000; "      \
 580         "bootm 0x01000000 - 0x00f00000"
 581
 582 #define CONFIG_ALU                              \
 583         "setenv bootargs root=/dev/$bdev rw "           \
 584         "console=$consoledev,$baudrate $othbootargs;"   \
 585         "cpu 1 release 0x01000000 - - -;"               \
 586         "cpu 2 release 0x01000000 - - -;"               \
 587         "cpu 3 release 0x01000000 - - -;"               \
 588         "cpu 4 release 0x01000000 - - -;"               \
 589         "cpu 5 release 0x01000000 - - -;"               \
 590         "cpu 6 release 0x01000000 - - -;"               \
 591         "cpu 7 release 0x01000000 - - -;"               \
 592         "go 0x01000000"
 593
 594 #define CONFIG_LINUX                            \
 595         "setenv bootargs root=/dev/ram rw "             \
 596         "console=$consoledev,$baudrate $othbootargs;"   \
 597         "setenv ramdiskaddr 0x02000000;"                \
 598         "setenv fdtaddr 0x00c00000;"                    \
 599         "setenv loadaddr 0x1000000;"                    \
 600         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 601
 602 #define CONFIG_HDBOOT                                   \
 603         "setenv bootargs root=/dev/$bdev rw "           \
 604         "console=$consoledev,$baudrate $othbootargs;"   \
 605         "tftp $loadaddr $bootfile;"                     \
 606         "tftp $fdtaddr $fdtfile;"                       \
 607         "bootm $loadaddr - $fdtaddr"
 608
 609 #define CONFIG_NFSBOOTCOMMAND                   \
 610         "setenv bootargs root=/dev/nfs rw "     \
 611         "nfsroot=$serverip:$rootpath "          \
 612         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 613         "console=$consoledev,$baudrate $othbootargs;"   \
 614         "tftp $loadaddr $bootfile;"             \
 615         "tftp $fdtaddr $fdtfile;"               \
 616         "bootm $loadaddr - $fdtaddr"
 617
 618 #define CONFIG_RAMBOOTCOMMAND                           \
 619         "setenv bootargs root=/dev/ram rw "             \
 620         "console=$consoledev,$baudrate $othbootargs;"   \
 621         "tftp $ramdiskaddr $ramdiskfile;"               \
 622         "tftp $loadaddr $bootfile;"                     \
 623         "tftp $fdtaddr $fdtfile;"                       \
 624         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 625
 626 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 627
 628 #include <asm/fsl_secure_boot.h>
 629
 630 #endif  /* __CONFIG_H */