include/configs/T4240RDB.h

   1 /*
   2  * Copyright 2014 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * T4240 RDB board configuration file
   9  */
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 #define CONFIG_T4240RDB
  14 #define CONFIG_PHYS_64BIT
  15 #define CONFIG_SYS_GENERIC_BOARD
  16 #define CONFIG_DISPLAY_BOARDINFO
  17
  18 #define CONFIG_FSL_SATA_V2
  19 #define CONFIG_PCIE4
  20
  21 #define CONFIG_ICS307_REFCLK_HZ         25000000  /* ICS307 ref clk freq */
  22
  23 #ifdef CONFIG_RAMBOOT_PBL
  24 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  25 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  26 #define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t4rdb/t4_pbi.cfg
  27 #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t4rdb/t4_rcw.cfg
  28 #endif
  29
  30 #define CONFIG_DDR_ECC
  31
  32 #define CONFIG_CMD_REGINFO
  33
  34 /* High Level Configuration Options */
  35 #define CONFIG_BOOKE
  36 #define CONFIG_E500                     /* BOOKE e500 family */
  37 #define CONFIG_E500MC                   /* BOOKE e500mc family */
  38 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  39 #define CONFIG_MP                       /* support multiple processors */
  40
  41 #ifndef CONFIG_SYS_TEXT_BASE
  42 #define CONFIG_SYS_TEXT_BASE    0xeff40000
  43 #endif
  44
  45 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  46 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  47 #endif
  48
  49 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  50 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
  51 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
  52 #define CONFIG_FSL_CAAM                 /* Enable SEC/CAAM */
  53 #define CONFIG_PCI                      /* Enable PCI/PCIE */
  54 #define CONFIG_PCIE1                    /* PCIE controler 1 */
  55 #define CONFIG_PCIE2                    /* PCIE controler 2 */
  56 #define CONFIG_PCIE3                    /* PCIE controler 3 */
  57 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  58 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  59
  60 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  61
  62 #define CONFIG_ENV_OVERWRITE
  63
  64 /*
  65  * These can be toggled for performance analysis, otherwise use default.
  66  */
  67 #define CONFIG_SYS_CACHE_STASHING
  68 #define CONFIG_BTB                      /* toggle branch predition */
  69 #ifdef CONFIG_DDR_ECC
  70 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
  71 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  72 #endif
  73
  74 #define CONFIG_ENABLE_36BIT_PHYS
  75
  76 #define CONFIG_ADDR_MAP
  77 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
  78
  79 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
  80 #define CONFIG_SYS_MEMTEST_END          0x00400000
  81 #define CONFIG_SYS_ALT_MEMTEST
  82 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
  83
  84 /*
  85  *  Config the L3 Cache as L3 SRAM
  86  */
  87 #define CONFIG_SYS_INIT_L3_ADDR         CONFIG_RAMBOOT_TEXT_BASE
  88
  89 #define CONFIG_SYS_DCSRBAR              0xf0000000
  90 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
  91
  92 /*
  93  * DDR Setup
  94  */
  95 #define CONFIG_VERY_BIG_RAM
  96 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
  97 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  98
  99 /* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */
 100 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 101 #define CONFIG_CHIP_SELECTS_PER_CTRL    4
 102 #define CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
 103
 104 #define CONFIG_DDR_SPD
 105 #define CONFIG_SYS_FSL_DDR3
 106
 107
 108 /*
 109  * IFC Definitions
 110  */
 111 #define CONFIG_SYS_FLASH_BASE   0xe0000000
 112 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 113
 114
 115 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 116
 117 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
 118 #define CONFIG_MISC_INIT_R
 119
 120 #define CONFIG_HWCONFIG
 121
 122 /* define to use L1 as initial stack */
 123 #define CONFIG_L1_INIT_RAM
 124 #define CONFIG_SYS_INIT_RAM_LOCK
 125 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 126 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 127 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe0ec000
 128 /* The assembler doesn't like typecast */
 129 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 130         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 131           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 132 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 133
 134 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 135                                         GENERATED_GBL_DATA_SIZE)
 136 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 137
 138 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)
 139 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 140
 141 /* Serial Port - controlled on board with jumper J8
 142  * open - index 2
 143  * shorted - index 1
 144  */
 145 #define CONFIG_CONS_INDEX       1
 146 #define CONFIG_SYS_NS16550
 147 #define CONFIG_SYS_NS16550_SERIAL
 148 #define CONFIG_SYS_NS16550_REG_SIZE     1
 149 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 150
 151 #define CONFIG_SYS_BAUDRATE_TABLE       \
 152         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 153
 154 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 155 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 156 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 157 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 158
 159 /* Use the HUSH parser */
 160 #define CONFIG_SYS_HUSH_PARSER
 161 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 162
 163 /* pass open firmware flat tree */
 164 #define CONFIG_OF_LIBFDT
 165 #define CONFIG_OF_BOARD_SETUP
 166 #define CONFIG_OF_STDOUT_VIA_ALIAS
 167
 168 /* new uImage format support */
 169 #define CONFIG_FIT
 170 #define CONFIG_FIT_VERBOSE      /* enable fit_format_{error,warning}() */
 171
 172 /* I2C */
 173 #define CONFIG_SYS_I2C
 174 #define CONFIG_SYS_I2C_FSL
 175 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 176 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 177 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 178 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 179
 180 /*
 181  * General PCI
 182  * Memory space is mapped 1-1, but I/O space must start from 0.
 183  */
 184
 185 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 186 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 187 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 188 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 189 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 190 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 191 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 192 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 193 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 194
 195 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 196 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 197 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 198 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 199 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 200 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 201 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 202 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 203 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 204
 205 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 206 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xc0000000
 207 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 208 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc40000000ull
 209 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
 210 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 211 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 212 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 213 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 214
 215 /* controller 4, Base address 203000 */
 216 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 217 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc60000000ull
 218 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x20000000      /* 512M */
 219 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 220 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 221 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 222
 223 #ifdef CONFIG_PCI
 224 #define CONFIG_PCI_INDIRECT_BRIDGE
 225 #define CONFIG_NET_MULTI
 226 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 227 #define CONFIG_E1000
 228
 229 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 230 #define CONFIG_DOS_PARTITION
 231 #endif  /* CONFIG_PCI */
 232
 233 /* SATA */
 234 #ifdef CONFIG_FSL_SATA_V2
 235 #define CONFIG_LIBATA
 236 #define CONFIG_FSL_SATA
 237
 238 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 239 #define CONFIG_SATA1
 240 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 241 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 242 #define CONFIG_SATA2
 243 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 244 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 245
 246 #define CONFIG_LBA48
 247 #define CONFIG_CMD_SATA
 248 #define CONFIG_DOS_PARTITION
 249 #define CONFIG_CMD_EXT2
 250 #endif
 251
 252 #ifdef CONFIG_FMAN_ENET
 253 #define CONFIG_MII              /* MII PHY management */
 254 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 255 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 256 #endif
 257
 258 /*
 259  * Environment
 260  */
 261 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 262 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 263
 264 /*
 265  * Command line configuration.
 266  */
 267 #include <config_cmd_default.h>
 268
 269 #define CONFIG_CMD_DHCP
 270 #define CONFIG_CMD_ELF
 271 #define CONFIG_CMD_ERRATA
 272 #define CONFIG_CMD_GREPENV
 273 #define CONFIG_CMD_IRQ
 274 #define CONFIG_CMD_I2C
 275 #define CONFIG_CMD_MII
 276 #define CONFIG_CMD_PING
 277 #define CONFIG_CMD_SETEXPR
 278
 279 #ifdef CONFIG_PCI
 280 #define CONFIG_CMD_PCI
 281 #define CONFIG_CMD_NET
 282 #endif
 283
 284 /*
 285  * Miscellaneous configurable options
 286  */
 287 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 288 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 289 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 290 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 291 #ifdef CONFIG_CMD_KGDB
 292 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 293 #else
 294 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 295 #endif
 296 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 297 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 298 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 299
 300 /*
 301  * For booting Linux, the board info and command line data
 302  * have to be in the first 64 MB of memory, since this is
 303  * the maximum mapped by the Linux kernel during initialization.
 304  */
 305 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 306 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 307
 308 #ifdef CONFIG_CMD_KGDB
 309 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 310 #endif
 311
 312 /*
 313  * Environment Configuration
 314  */
 315 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 316 #define CONFIG_BOOTFILE         "uImage"
 317 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 318
 319 /* default location for tftp and bootm */
 320 #define CONFIG_LOADADDR         1000000
 321
 322
 323 #define CONFIG_BAUDRATE 115200
 324
 325 #define CONFIG_HVBOOT                                   \
 326         "setenv bootargs config-addr=0x60000000; "      \
 327         "bootm 0x01000000 - 0x00f00000"
 328
 329 #ifdef CONFIG_SYS_NO_FLASH
 330 #ifndef CONFIG_RAMBOOT_PBL
 331 #define CONFIG_ENV_IS_NOWHERE
 332 #endif
 333 #else
 334 #define CONFIG_FLASH_CFI_DRIVER
 335 #define CONFIG_SYS_FLASH_CFI
 336 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 337 #endif
 338
 339 #if defined(CONFIG_SPIFLASH)
 340 #define CONFIG_SYS_EXTRA_ENV_RELOC
 341 #define CONFIG_ENV_IS_IN_SPI_FLASH
 342 #define CONFIG_ENV_SPI_BUS              0
 343 #define CONFIG_ENV_SPI_CS               0
 344 #define CONFIG_ENV_SPI_MAX_HZ           10000000
 345 #define CONFIG_ENV_SPI_MODE             0
 346 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 347 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 348 #define CONFIG_ENV_SECT_SIZE            0x10000
 349 #elif defined(CONFIG_SDCARD)
 350 #define CONFIG_SYS_EXTRA_ENV_RELOC
 351 #define CONFIG_ENV_IS_IN_MMC
 352 #define CONFIG_SYS_MMC_ENV_DEV          0
 353 #define CONFIG_ENV_SIZE                 0x2000
 354 #define CONFIG_ENV_OFFSET               (512 * 1658)
 355 #elif defined(CONFIG_NAND)
 356 #define CONFIG_SYS_EXTRA_ENV_RELOC
 357 #define CONFIG_ENV_IS_IN_NAND
 358 #define CONFIG_ENV_SIZE                 CONFIG_SYS_NAND_BLOCK_SIZE
 359 #define CONFIG_ENV_OFFSET               (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
 360 #elif defined(CONFIG_ENV_IS_NOWHERE)
 361 #define CONFIG_ENV_SIZE         0x2000
 362 #else
 363 #define CONFIG_ENV_IS_IN_FLASH
 364 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 365 #define CONFIG_ENV_SIZE         0x2000
 366 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 367 #endif
 368
 369 #define CONFIG_SYS_CLK_FREQ     66666666
 370 #define CONFIG_DDR_CLK_FREQ     133333333
 371
 372 #ifndef __ASSEMBLY__
 373 unsigned long get_board_sys_clk(void);
 374 unsigned long get_board_ddr_clk(void);
 375 #endif
 376
 377 /*
 378  * DDR Setup
 379  */
 380 #define CONFIG_SYS_SPD_BUS_NUM  0
 381 #define SPD_EEPROM_ADDRESS1     0x52
 382 #define SPD_EEPROM_ADDRESS2     0x54
 383 #define SPD_EEPROM_ADDRESS3     0x56
 384 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1     /* for p3041/p5010 */
 385 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 386
 387 /*
 388  * IFC Definitions
 389  */
 390 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 391 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 392                                 + 0x8000000) | \
 393                                 CSPR_PORT_SIZE_16 | \
 394                                 CSPR_MSEL_NOR | \
 395                                 CSPR_V)
 396 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 397 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 398                                 CSPR_PORT_SIZE_16 | \
 399                                 CSPR_MSEL_NOR | \
 400                                 CSPR_V)
 401 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 402 /* NOR Flash Timing Params */
 403 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 404
 405 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 406                                 FTIM0_NOR_TEADC(0x5) | \
 407                                 FTIM0_NOR_TEAHC(0x5))
 408 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 409                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 410                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 411 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 412                                 FTIM2_NOR_TCH(0x4) | \
 413                                 FTIM2_NOR_TWPH(0x0E) | \
 414                                 FTIM2_NOR_TWP(0x1c))
 415 #define CONFIG_SYS_NOR_FTIM3    0x0
 416
 417 #define CONFIG_SYS_FLASH_QUIET_TEST
 418 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 419
 420 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 421 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 422 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 423 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 424
 425 #define CONFIG_SYS_FLASH_EMPTY_INFO
 426 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 427                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 428
 429 /* NAND Flash on IFC */
 430 #define CONFIG_NAND_FSL_IFC
 431 #define CONFIG_SYS_NAND_MAX_ECCPOS      256
 432 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
 433 #define CONFIG_SYS_NAND_BASE            0xff800000
 434 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 435
 436 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 437 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 438                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 439                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 440                                 | CSPR_V)
 441 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 442
 443 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 444                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 445                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 446                                 | CSOR_NAND_RAL_3       /* RAL = 2Byes */ \
 447                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 448                                 | CSOR_NAND_SPRZ_224    /* Spare size = 224 */ \
 449                                 | CSOR_NAND_PB(128))    /*Page Per Block = 128*/
 450
 451 #define CONFIG_SYS_NAND_ONFI_DETECTION
 452
 453 /* ONFI NAND Flash mode0 Timing Params */
 454 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 455                                         FTIM0_NAND_TWP(0x18)   | \
 456                                         FTIM0_NAND_TWCHT(0x07) | \
 457                                         FTIM0_NAND_TWH(0x0a))
 458 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 459                                         FTIM1_NAND_TWBE(0x39)  | \
 460                                         FTIM1_NAND_TRR(0x0e)   | \
 461                                         FTIM1_NAND_TRP(0x18))
 462 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 463                                         FTIM2_NAND_TREH(0x0a) | \
 464                                         FTIM2_NAND_TWHRE(0x1e))
 465 #define CONFIG_SYS_NAND_FTIM3           0x0
 466
 467 #define CONFIG_SYS_NAND_DDR_LAW         11
 468 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 469 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 470 #define CONFIG_CMD_NAND
 471
 472 #define CONFIG_SYS_NAND_BLOCK_SIZE      (512 * 1024)
 473
 474 #if defined(CONFIG_NAND)
 475 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 476 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 477 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 478 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 479 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 480 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 481 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 482 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 483 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 484 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR0_CSPR
 485 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 486 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 487 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 488 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 489 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 490 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 491 #else
 492 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 493 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 494 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 495 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 496 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 497 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 498 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 499 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 500 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NAND_CSPR_EXT
 501 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 502 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 503 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 504 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 505 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 506 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 507 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 508 #endif
 509 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 510 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR1_CSPR
 511 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 512 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 513 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 514 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 515 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 516 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 517
 518 /* CPLD on IFC */
 519 #define CONFIG_SYS_CPLD_BASE    0xffdf0000
 520 #define CONFIG_SYS_CPLD_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
 521 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 522 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
 523                                 | CSPR_PORT_SIZE_8 \
 524                                 | CSPR_MSEL_GPCM \
 525                                 | CSPR_V)
 526
 527 #define CONFIG_SYS_AMASK3       IFC_AMASK(4*1024)
 528 #define CONFIG_SYS_CSOR3        0x0
 529
 530 /* CPLD Timing parameters for IFC CS3 */
 531 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 532                                         FTIM0_GPCM_TEADC(0x0e) | \
 533                                         FTIM0_GPCM_TEAHC(0x0e))
 534 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 535                                         FTIM1_GPCM_TRAD(0x1f))
 536 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 537                                         FTIM2_GPCM_TCH(0x8) | \
 538                                         FTIM2_GPCM_TWP(0x1f))
 539 #define CONFIG_SYS_CS3_FTIM3            0x0
 540
 541 #if defined(CONFIG_RAMBOOT_PBL)
 542 #define CONFIG_SYS_RAMBOOT
 543 #endif
 544
 545
 546 /* I2C */
 547 #define CONFIG_SYS_FSL_I2C_SPEED        100000  /* I2C speed */
 548 #define CONFIG_SYS_FSL_I2C2_SPEED       100000  /* I2C2 speed */
 549 #define I2C_MUX_PCA_ADDR_PRI            0x77 /* I2C bus multiplexer,primary */
 550 #define I2C_MUX_PCA_ADDR_SEC            0x76 /* I2C bus multiplexer,secondary */
 551
 552 #define I2C_MUX_CH_DEFAULT      0x8
 553 #define I2C_MUX_CH_VOL_MONITOR  0xa
 554 #define I2C_MUX_CH_VSC3316_FS   0xc
 555 #define I2C_MUX_CH_VSC3316_BS   0xd
 556
 557 /* Voltage monitor on channel 2*/
 558 #define I2C_VOL_MONITOR_ADDR            0x40
 559 #define I2C_VOL_MONITOR_BUS_V_OFFSET    0x2
 560 #define I2C_VOL_MONITOR_BUS_V_OVF       0x1
 561 #define I2C_VOL_MONITOR_BUS_V_SHIFT     3
 562
 563 /*
 564  * eSPI - Enhanced SPI
 565  */
 566 #define CONFIG_FSL_ESPI
 567 #define CONFIG_SPI_FLASH
 568 #define CONFIG_SPI_FLASH_SST
 569 #define CONFIG_CMD_SF
 570 #define CONFIG_SF_DEFAULT_SPEED         10000000
 571 #define CONFIG_SF_DEFAULT_MODE          0
 572
 573
 574 /* Qman/Bman */
 575 #ifndef CONFIG_NOBQFMAN
 576 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 577 #define CONFIG_SYS_BMAN_NUM_PORTALS     50
 578 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 579 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 580 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 581 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 582 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 583 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 584 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 585 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 586                                         CONFIG_SYS_BMAN_CENA_SIZE)
 587 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 588 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 589 #define CONFIG_SYS_QMAN_NUM_PORTALS     50
 590 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 591 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 592 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 593 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 594 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 595 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 596 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 597 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 598                                         CONFIG_SYS_QMAN_CENA_SIZE)
 599 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 600 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 601
 602 #define CONFIG_SYS_DPAA_FMAN
 603 #define CONFIG_SYS_DPAA_PME
 604 #define CONFIG_SYS_PMAN
 605 #define CONFIG_SYS_DPAA_DCE
 606 #define CONFIG_SYS_DPAA_RMAN
 607 #define CONFIG_SYS_INTERLAKEN
 608
 609 /* Default address of microcode for the Linux Fman driver */
 610 #if defined(CONFIG_SPIFLASH)
 611 /*
 612  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 613  * env, so we got 0x110000.
 614  */
 615 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 616 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 617 #elif defined(CONFIG_SDCARD)
 618 /*
 619  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 620  * about 825KB (1650 blocks), Env is stored after the image, and the env size is
 621  * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
 622  */
 623 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 624 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680)
 625 #elif defined(CONFIG_NAND)
 626 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 627 #define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE)
 628 #else
 629 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 630 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000
 631 #endif
 632 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 633 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 634 #endif /* CONFIG_NOBQFMAN */
 635
 636 #ifdef CONFIG_SYS_DPAA_FMAN
 637 #define CONFIG_FMAN_ENET
 638 #define CONFIG_PHYLIB_10G
 639 #define CONFIG_PHY_VITESSE
 640 #define CONFIG_PHY_CORTINA
 641 #define CONFIG_CORTINA_FW_ADDR          0xefe00000
 642 #define CONFIG_CORTINA_FW_LENGTH        0x40000
 643 #define CONFIG_PHY_TERANETICS
 644 #define SGMII_PHY_ADDR1 0x0
 645 #define SGMII_PHY_ADDR2 0x1
 646 #define SGMII_PHY_ADDR3 0x2
 647 #define SGMII_PHY_ADDR4 0x3
 648 #define SGMII_PHY_ADDR5 0x4
 649 #define SGMII_PHY_ADDR6 0x5
 650 #define SGMII_PHY_ADDR7 0x6
 651 #define SGMII_PHY_ADDR8 0x7
 652 #define FM1_10GEC1_PHY_ADDR     0x10
 653 #define FM1_10GEC2_PHY_ADDR     0x11
 654 #define FM2_10GEC1_PHY_ADDR     0x12
 655 #define FM2_10GEC2_PHY_ADDR     0x13
 656 #define CORTINA_PHY_ADDR1       FM1_10GEC1_PHY_ADDR
 657 #define CORTINA_PHY_ADDR2       FM1_10GEC2_PHY_ADDR
 658 #define CORTINA_PHY_ADDR3       FM2_10GEC1_PHY_ADDR
 659 #define CORTINA_PHY_ADDR4       FM2_10GEC2_PHY_ADDR
 660 #endif
 661
 662
 663 /* SATA */
 664 #ifdef CONFIG_FSL_SATA_V2
 665 #define CONFIG_LIBATA
 666 #define CONFIG_FSL_SATA
 667
 668 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 669 #define CONFIG_SATA1
 670 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 671 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 672 #define CONFIG_SATA2
 673 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 674 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 675
 676 #define CONFIG_LBA48
 677 #define CONFIG_CMD_SATA
 678 #define CONFIG_DOS_PARTITION
 679 #define CONFIG_CMD_EXT2
 680 #endif
 681
 682 #ifdef CONFIG_FMAN_ENET
 683 #define CONFIG_MII              /* MII PHY management */
 684 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 685 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 686 #endif
 687
 688 /*
 689 * USB
 690 */
 691 #define CONFIG_CMD_USB
 692 #define CONFIG_USB_STORAGE
 693 #define CONFIG_USB_EHCI
 694 #define CONFIG_USB_EHCI_FSL
 695 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 696 #define CONFIG_CMD_EXT2
 697 #define CONFIG_HAS_FSL_DR_USB
 698
 699 #define CONFIG_MMC
 700
 701 #ifdef CONFIG_MMC
 702 #define CONFIG_FSL_ESDHC
 703 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 704 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 705 #define CONFIG_CMD_MMC
 706 #define CONFIG_GENERIC_MMC
 707 #define CONFIG_CMD_EXT2
 708 #define CONFIG_CMD_FAT
 709 #define CONFIG_DOS_PARTITION
 710 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 711 #endif
 712
 713 /* Hash command with SHA acceleration supported in hardware */
 714 #ifdef CONFIG_FSL_CAAM
 715 #define CONFIG_CMD_HASH
 716 #define CONFIG_SHA_HW_ACCEL
 717 #endif
 718
 719 #define CONFIG_BOOTDELAY        10      /* -1 disables auto-boot */
 720
 721 #define __USB_PHY_TYPE  utmi
 722
 723 /*
 724  * T4240 has 3 DDR controllers. Default to 3-way interleaving. It can be
 725  * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to 2-way
 726  * interleaving. It can be cacheline, page, bank, superbank.
 727  * See doc/README.fsl-ddr for details.
 728  */
 729 #ifdef CONFIG_PPC_T4240
 730 #define CTRL_INTLV_PREFERED 3way_4KB
 731 #else
 732 #define CTRL_INTLV_PREFERED cacheline
 733 #endif
 734
 735 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 736         "hwconfig=fsl_ddr:"                                     \
 737         "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) ","      \
 738         "bank_intlv=auto;"                                      \
 739         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 740         "netdev=eth0\0"                                         \
 741         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 742         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 743         "tftpflash=tftpboot $loadaddr $uboot && "               \
 744         "protect off $ubootaddr +$filesize && "                 \
 745         "erase $ubootaddr +$filesize && "                       \
 746         "cp.b $loadaddr $ubootaddr $filesize && "               \
 747         "protect on $ubootaddr +$filesize && "                  \
 748         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 749         "consoledev=ttyS0\0"                                    \
 750         "ramdiskaddr=2000000\0"                                 \
 751         "ramdiskfile=t4240rdb/ramdisk.uboot\0"                  \
 752         "fdtaddr=c00000\0"                                      \
 753         "fdtfile=t4240rdb/t4240rdb.dtb\0"                       \
 754         "bdev=sda3\0"
 755
 756 #define CONFIG_HVBOOT                                   \
 757         "setenv bootargs config-addr=0x60000000; "      \
 758         "bootm 0x01000000 - 0x00f00000"
 759
 760 #define CONFIG_LINUX                                    \
 761         "setenv bootargs root=/dev/ram rw "             \
 762         "console=$consoledev,$baudrate $othbootargs;"   \
 763         "setenv ramdiskaddr 0x02000000;"                \
 764         "setenv fdtaddr 0x00c00000;"                    \
 765         "setenv loadaddr 0x1000000;"                    \
 766         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 767
 768 #define CONFIG_HDBOOT                                   \
 769         "setenv bootargs root=/dev/$bdev rw "           \
 770         "console=$consoledev,$baudrate $othbootargs;"   \
 771         "tftp $loadaddr $bootfile;"                     \
 772         "tftp $fdtaddr $fdtfile;"                       \
 773         "bootm $loadaddr - $fdtaddr"
 774
 775 #define CONFIG_NFSBOOTCOMMAND                   \
 776         "setenv bootargs root=/dev/nfs rw "     \
 777         "nfsroot=$serverip:$rootpath "          \
 778         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 779         "console=$consoledev,$baudrate $othbootargs;"   \
 780         "tftp $loadaddr $bootfile;"             \
 781         "tftp $fdtaddr $fdtfile;"               \
 782         "bootm $loadaddr - $fdtaddr"
 783
 784 #define CONFIG_RAMBOOTCOMMAND                           \
 785         "setenv bootargs root=/dev/ram rw "             \
 786         "console=$consoledev,$baudrate $othbootargs;"   \
 787         "tftp $ramdiskaddr $ramdiskfile;"               \
 788         "tftp $loadaddr $bootfile;"                     \
 789         "tftp $fdtaddr $fdtfile;"                       \
 790         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 791
 792 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 793
 794 #include <asm/fsl_secure_boot.h>
 795
 796 #ifdef CONFIG_SECURE_BOOT
 797 /* Secure Boot target was not getting build for T4240 because of
 798  * increased binary size. So the size is being reduced by removing USB
 799  * which is anyways not used in Secure Environment.
 800  */
 801 #undef CONFIG_CMD_USB
 802 #define CONFIG_CMD_BLOB
 803 #endif
 804
 805 #endif  /* __CONFIG_H */