include/configs/T4240RDB.h

   1 /*
   2  * Copyright 2014 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * T4240 RDB board configuration file
   9  */
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 #define CONFIG_T4240RDB
  14 #define CONFIG_PHYS_64BIT
  15
  16 #define CONFIG_FSL_SATA_V2
  17 #define CONFIG_PCIE4
  18
  19 #define CONFIG_ICS307_REFCLK_HZ         25000000  /* ICS307 ref clk freq */
  20
  21 #ifdef CONFIG_RAMBOOT_PBL
  22 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  23 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  24 #define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t4rdb/t4_pbi.cfg
  25 #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t4rdb/t4_rcw.cfg
  26 #endif
  27
  28 #define CONFIG_DDR_ECC
  29
  30 #define CONFIG_CMD_REGINFO
  31
  32 /* High Level Configuration Options */
  33 #define CONFIG_BOOKE
  34 #define CONFIG_E500                     /* BOOKE e500 family */
  35 #define CONFIG_E500MC                   /* BOOKE e500mc family */
  36 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  37 #define CONFIG_MP                       /* support multiple processors */
  38
  39 #ifndef CONFIG_SYS_TEXT_BASE
  40 #define CONFIG_SYS_TEXT_BASE    0xeff40000
  41 #endif
  42
  43 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  44 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  45 #endif
  46
  47 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  48 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
  49 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
  50 #define CONFIG_FSL_CAAM                 /* Enable SEC/CAAM */
  51 #define CONFIG_PCI                      /* Enable PCI/PCIE */
  52 #define CONFIG_PCIE1                    /* PCIE controler 1 */
  53 #define CONFIG_PCIE2                    /* PCIE controler 2 */
  54 #define CONFIG_PCIE3                    /* PCIE controler 3 */
  55 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  56 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  57
  58 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  59
  60 #define CONFIG_ENV_OVERWRITE
  61
  62 /*
  63  * These can be toggled for performance analysis, otherwise use default.
  64  */
  65 #define CONFIG_SYS_CACHE_STASHING
  66 #define CONFIG_BTB                      /* toggle branch predition */
  67 #ifdef CONFIG_DDR_ECC
  68 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
  69 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  70 #endif
  71
  72 #define CONFIG_ENABLE_36BIT_PHYS
  73
  74 #define CONFIG_ADDR_MAP
  75 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
  76
  77 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
  78 #define CONFIG_SYS_MEMTEST_END          0x00400000
  79 #define CONFIG_SYS_ALT_MEMTEST
  80 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
  81
  82 /*
  83  *  Config the L3 Cache as L3 SRAM
  84  */
  85 #define CONFIG_SYS_INIT_L3_ADDR         CONFIG_RAMBOOT_TEXT_BASE
  86
  87 #define CONFIG_SYS_DCSRBAR              0xf0000000
  88 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
  89
  90 /*
  91  * DDR Setup
  92  */
  93 #define CONFIG_VERY_BIG_RAM
  94 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
  95 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  96
  97 /* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */
  98 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
  99 #define CONFIG_CHIP_SELECTS_PER_CTRL    4
 100 #define CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
 101
 102 #define CONFIG_DDR_SPD
 103 #define CONFIG_SYS_FSL_DDR3
 104
 105
 106 /*
 107  * IFC Definitions
 108  */
 109 #define CONFIG_SYS_FLASH_BASE   0xe0000000
 110 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 111
 112
 113 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 114
 115 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
 116 #define CONFIG_MISC_INIT_R
 117
 118 #define CONFIG_HWCONFIG
 119
 120 /* define to use L1 as initial stack */
 121 #define CONFIG_L1_INIT_RAM
 122 #define CONFIG_SYS_INIT_RAM_LOCK
 123 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 124 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 125 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe0ec000
 126 /* The assembler doesn't like typecast */
 127 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 128         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 129           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 130 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 131
 132 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 133                                         GENERATED_GBL_DATA_SIZE)
 134 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 135
 136 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)
 137 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 138
 139 /* Serial Port - controlled on board with jumper J8
 140  * open - index 2
 141  * shorted - index 1
 142  */
 143 #define CONFIG_CONS_INDEX       1
 144 #define CONFIG_SYS_NS16550
 145 #define CONFIG_SYS_NS16550_SERIAL
 146 #define CONFIG_SYS_NS16550_REG_SIZE     1
 147 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 148
 149 #define CONFIG_SYS_BAUDRATE_TABLE       \
 150         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 151
 152 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 153 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 154 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 155 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 156
 157 /* Use the HUSH parser */
 158 #define CONFIG_SYS_HUSH_PARSER
 159 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 160
 161 /* pass open firmware flat tree */
 162 #define CONFIG_OF_LIBFDT
 163 #define CONFIG_OF_BOARD_SETUP
 164 #define CONFIG_OF_STDOUT_VIA_ALIAS
 165
 166 /* new uImage format support */
 167 #define CONFIG_FIT
 168 #define CONFIG_FIT_VERBOSE      /* enable fit_format_{error,warning}() */
 169
 170 /* I2C */
 171 #define CONFIG_SYS_I2C
 172 #define CONFIG_SYS_I2C_FSL
 173 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 174 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 175 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 176 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 177
 178 /*
 179  * General PCI
 180  * Memory space is mapped 1-1, but I/O space must start from 0.
 181  */
 182
 183 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 184 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 185 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 186 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 187 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 188 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 189 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 190 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 191 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 192
 193 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 194 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 195 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 196 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 197 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 198 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 199 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 200 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 201 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 202
 203 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 204 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xc0000000
 205 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 206 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc40000000ull
 207 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
 208 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 209 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 210 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 211 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 212
 213 /* controller 4, Base address 203000 */
 214 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 215 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc60000000ull
 216 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x20000000      /* 512M */
 217 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 218 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 219 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 220
 221 #ifdef CONFIG_PCI
 222 #define CONFIG_PCI_INDIRECT_BRIDGE
 223 #define CONFIG_NET_MULTI
 224 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 225 #define CONFIG_E1000
 226
 227 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 228 #define CONFIG_DOS_PARTITION
 229 #endif  /* CONFIG_PCI */
 230
 231 /* SATA */
 232 #ifdef CONFIG_FSL_SATA_V2
 233 #define CONFIG_LIBATA
 234 #define CONFIG_FSL_SATA
 235
 236 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 237 #define CONFIG_SATA1
 238 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 239 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 240 #define CONFIG_SATA2
 241 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 242 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 243
 244 #define CONFIG_LBA48
 245 #define CONFIG_CMD_SATA
 246 #define CONFIG_DOS_PARTITION
 247 #define CONFIG_CMD_EXT2
 248 #endif
 249
 250 #ifdef CONFIG_FMAN_ENET
 251 #define CONFIG_MII              /* MII PHY management */
 252 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 253 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 254 #endif
 255
 256 /*
 257  * Environment
 258  */
 259 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 260 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 261
 262 /*
 263  * Command line configuration.
 264  */
 265 #include <config_cmd_default.h>
 266
 267 #define CONFIG_CMD_DHCP
 268 #define CONFIG_CMD_ELF
 269 #define CONFIG_CMD_ERRATA
 270 #define CONFIG_CMD_GREPENV
 271 #define CONFIG_CMD_IRQ
 272 #define CONFIG_CMD_I2C
 273 #define CONFIG_CMD_MII
 274 #define CONFIG_CMD_PING
 275 #define CONFIG_CMD_SETEXPR
 276
 277 #ifdef CONFIG_PCI
 278 #define CONFIG_CMD_PCI
 279 #define CONFIG_CMD_NET
 280 #endif
 281
 282 /*
 283  * Miscellaneous configurable options
 284  */
 285 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 286 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 287 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 288 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 289 #ifdef CONFIG_CMD_KGDB
 290 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 291 #else
 292 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 293 #endif
 294 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 295 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 296 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 297
 298 /*
 299  * For booting Linux, the board info and command line data
 300  * have to be in the first 64 MB of memory, since this is
 301  * the maximum mapped by the Linux kernel during initialization.
 302  */
 303 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 304 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 305
 306 #ifdef CONFIG_CMD_KGDB
 307 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 308 #endif
 309
 310 /*
 311  * Environment Configuration
 312  */
 313 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 314 #define CONFIG_BOOTFILE         "uImage"
 315 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 316
 317 /* default location for tftp and bootm */
 318 #define CONFIG_LOADADDR         1000000
 319
 320
 321 #define CONFIG_BAUDRATE 115200
 322
 323 #define CONFIG_HVBOOT                                   \
 324         "setenv bootargs config-addr=0x60000000; "      \
 325         "bootm 0x01000000 - 0x00f00000"
 326
 327 #ifdef CONFIG_SYS_NO_FLASH
 328 #ifndef CONFIG_RAMBOOT_PBL
 329 #define CONFIG_ENV_IS_NOWHERE
 330 #endif
 331 #else
 332 #define CONFIG_FLASH_CFI_DRIVER
 333 #define CONFIG_SYS_FLASH_CFI
 334 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 335 #endif
 336
 337 #if defined(CONFIG_SPIFLASH)
 338 #define CONFIG_SYS_EXTRA_ENV_RELOC
 339 #define CONFIG_ENV_IS_IN_SPI_FLASH
 340 #define CONFIG_ENV_SPI_BUS              0
 341 #define CONFIG_ENV_SPI_CS               0
 342 #define CONFIG_ENV_SPI_MAX_HZ           10000000
 343 #define CONFIG_ENV_SPI_MODE             0
 344 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 345 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 346 #define CONFIG_ENV_SECT_SIZE            0x10000
 347 #elif defined(CONFIG_SDCARD)
 348 #define CONFIG_SYS_EXTRA_ENV_RELOC
 349 #define CONFIG_ENV_IS_IN_MMC
 350 #define CONFIG_SYS_MMC_ENV_DEV          0
 351 #define CONFIG_ENV_SIZE                 0x2000
 352 #define CONFIG_ENV_OFFSET               (512 * 1658)
 353 #elif defined(CONFIG_NAND)
 354 #define CONFIG_SYS_EXTRA_ENV_RELOC
 355 #define CONFIG_ENV_IS_IN_NAND
 356 #define CONFIG_ENV_SIZE                 CONFIG_SYS_NAND_BLOCK_SIZE
 357 #define CONFIG_ENV_OFFSET               (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
 358 #elif defined(CONFIG_ENV_IS_NOWHERE)
 359 #define CONFIG_ENV_SIZE         0x2000
 360 #else
 361 #define CONFIG_ENV_IS_IN_FLASH
 362 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 363 #define CONFIG_ENV_SIZE         0x2000
 364 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 365 #endif
 366
 367 #define CONFIG_SYS_CLK_FREQ     66666666
 368 #define CONFIG_DDR_CLK_FREQ     133333333
 369
 370 #ifndef __ASSEMBLY__
 371 unsigned long get_board_sys_clk(void);
 372 unsigned long get_board_ddr_clk(void);
 373 #endif
 374
 375 /*
 376  * DDR Setup
 377  */
 378 #define CONFIG_SYS_SPD_BUS_NUM  0
 379 #define SPD_EEPROM_ADDRESS1     0x52
 380 #define SPD_EEPROM_ADDRESS2     0x54
 381 #define SPD_EEPROM_ADDRESS3     0x56
 382 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1     /* for p3041/p5010 */
 383 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 384
 385 /*
 386  * IFC Definitions
 387  */
 388 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 389 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 390                                 + 0x8000000) | \
 391                                 CSPR_PORT_SIZE_16 | \
 392                                 CSPR_MSEL_NOR | \
 393                                 CSPR_V)
 394 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 395 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 396                                 CSPR_PORT_SIZE_16 | \
 397                                 CSPR_MSEL_NOR | \
 398                                 CSPR_V)
 399 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 400 /* NOR Flash Timing Params */
 401 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 402
 403 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 404                                 FTIM0_NOR_TEADC(0x5) | \
 405                                 FTIM0_NOR_TEAHC(0x5))
 406 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 407                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 408                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 409 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 410                                 FTIM2_NOR_TCH(0x4) | \
 411                                 FTIM2_NOR_TWPH(0x0E) | \
 412                                 FTIM2_NOR_TWP(0x1c))
 413 #define CONFIG_SYS_NOR_FTIM3    0x0
 414
 415 #define CONFIG_SYS_FLASH_QUIET_TEST
 416 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 417
 418 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 419 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 420 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 421 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 422
 423 #define CONFIG_SYS_FLASH_EMPTY_INFO
 424 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 425                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 426
 427 /* NAND Flash on IFC */
 428 #define CONFIG_NAND_FSL_IFC
 429 #define CONFIG_SYS_NAND_MAX_ECCPOS      256
 430 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
 431 #define CONFIG_SYS_NAND_BASE            0xff800000
 432 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 433
 434 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 435 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 436                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 437                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 438                                 | CSPR_V)
 439 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 440
 441 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 442                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 443                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 444                                 | CSOR_NAND_RAL_3       /* RAL = 2Byes */ \
 445                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 446                                 | CSOR_NAND_SPRZ_224    /* Spare size = 224 */ \
 447                                 | CSOR_NAND_PB(128))    /*Page Per Block = 128*/
 448
 449 #define CONFIG_SYS_NAND_ONFI_DETECTION
 450
 451 /* ONFI NAND Flash mode0 Timing Params */
 452 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 453                                         FTIM0_NAND_TWP(0x18)   | \
 454                                         FTIM0_NAND_TWCHT(0x07) | \
 455                                         FTIM0_NAND_TWH(0x0a))
 456 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 457                                         FTIM1_NAND_TWBE(0x39)  | \
 458                                         FTIM1_NAND_TRR(0x0e)   | \
 459                                         FTIM1_NAND_TRP(0x18))
 460 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 461                                         FTIM2_NAND_TREH(0x0a) | \
 462                                         FTIM2_NAND_TWHRE(0x1e))
 463 #define CONFIG_SYS_NAND_FTIM3           0x0
 464
 465 #define CONFIG_SYS_NAND_DDR_LAW         11
 466 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 467 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 468 #define CONFIG_MTD_NAND_VERIFY_WRITE
 469 #define CONFIG_CMD_NAND
 470
 471 #define CONFIG_SYS_NAND_BLOCK_SIZE      (512 * 1024)
 472
 473 #if defined(CONFIG_NAND)
 474 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 475 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 476 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 477 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 478 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 479 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 480 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 481 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 482 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 483 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR0_CSPR
 484 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 485 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 486 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 487 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 488 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 489 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 490 #else
 491 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 492 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 493 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 494 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 495 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 496 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 497 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 498 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 499 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NAND_CSPR_EXT
 500 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 501 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 502 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 503 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 504 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 505 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 506 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 507 #endif
 508 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 509 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR1_CSPR
 510 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 511 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 512 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 513 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 514 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 515 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 516
 517 /* CPLD on IFC */
 518 #define CONFIG_SYS_CPLD_BASE    0xffdf0000
 519 #define CONFIG_SYS_CPLD_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
 520 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 521 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
 522                                 | CSPR_PORT_SIZE_8 \
 523                                 | CSPR_MSEL_GPCM \
 524                                 | CSPR_V)
 525
 526 #define CONFIG_SYS_AMASK3       IFC_AMASK(4*1024)
 527 #define CONFIG_SYS_CSOR3        0x0
 528
 529 /* CPLD Timing parameters for IFC CS3 */
 530 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 531                                         FTIM0_GPCM_TEADC(0x0e) | \
 532                                         FTIM0_GPCM_TEAHC(0x0e))
 533 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 534                                         FTIM1_GPCM_TRAD(0x1f))
 535 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 536                                         FTIM2_GPCM_TCH(0x0) | \
 537                                         FTIM2_GPCM_TWP(0x1f))
 538 #define CONFIG_SYS_CS3_FTIM3            0x0
 539
 540 #if defined(CONFIG_RAMBOOT_PBL)
 541 #define CONFIG_SYS_RAMBOOT
 542 #endif
 543
 544
 545 /* I2C */
 546 #define CONFIG_SYS_FSL_I2C_SPEED        100000  /* I2C speed */
 547 #define CONFIG_SYS_FSL_I2C2_SPEED       100000  /* I2C2 speed */
 548 #define I2C_MUX_PCA_ADDR_PRI            0x77 /* I2C bus multiplexer,primary */
 549 #define I2C_MUX_PCA_ADDR_SEC            0x76 /* I2C bus multiplexer,secondary */
 550
 551 #define I2C_MUX_CH_DEFAULT      0x8
 552 #define I2C_MUX_CH_VOL_MONITOR  0xa
 553 #define I2C_MUX_CH_VSC3316_FS   0xc
 554 #define I2C_MUX_CH_VSC3316_BS   0xd
 555
 556 /* Voltage monitor on channel 2*/
 557 #define I2C_VOL_MONITOR_ADDR            0x40
 558 #define I2C_VOL_MONITOR_BUS_V_OFFSET    0x2
 559 #define I2C_VOL_MONITOR_BUS_V_OVF       0x1
 560 #define I2C_VOL_MONITOR_BUS_V_SHIFT     3
 561
 562 /*
 563  * eSPI - Enhanced SPI
 564  */
 565 #define CONFIG_FSL_ESPI
 566 #define CONFIG_SPI_FLASH
 567 #define CONFIG_SPI_FLASH_SST
 568 #define CONFIG_CMD_SF
 569 #define CONFIG_SF_DEFAULT_SPEED         10000000
 570 #define CONFIG_SF_DEFAULT_MODE          0
 571
 572
 573 /* Qman/Bman */
 574 #ifndef CONFIG_NOBQFMAN
 575 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 576 #define CONFIG_SYS_BMAN_NUM_PORTALS     50
 577 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 578 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 579 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 580 #define CONFIG_SYS_QMAN_NUM_PORTALS     50
 581 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 582 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 583 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 584
 585 #define CONFIG_SYS_DPAA_FMAN
 586 #define CONFIG_SYS_DPAA_PME
 587 #define CONFIG_SYS_PMAN
 588 #define CONFIG_SYS_DPAA_DCE
 589 #define CONFIG_SYS_DPAA_RMAN
 590 #define CONFIG_SYS_INTERLAKEN
 591
 592 /* Default address of microcode for the Linux Fman driver */
 593 #if defined(CONFIG_SPIFLASH)
 594 /*
 595  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 596  * env, so we got 0x110000.
 597  */
 598 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 599 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 600 #elif defined(CONFIG_SDCARD)
 601 /*
 602  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 603  * about 825KB (1650 blocks), Env is stored after the image, and the env size is
 604  * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
 605  */
 606 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 607 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680)
 608 #elif defined(CONFIG_NAND)
 609 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 610 #define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE)
 611 #else
 612 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 613 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000
 614 #endif
 615 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 616 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 617 #endif /* CONFIG_NOBQFMAN */
 618
 619 #ifdef CONFIG_SYS_DPAA_FMAN
 620 #define CONFIG_FMAN_ENET
 621 #define CONFIG_PHYLIB_10G
 622 #define CONFIG_PHY_VITESSE
 623 #define CONFIG_PHY_CORTINA
 624 #define CONFIG_CORTINA_FW_ADDR          0xefe00000
 625 #define CONFIG_CORTINA_FW_LENGTH        0x40000
 626 #define CONFIG_PHY_TERANETICS
 627 #define SGMII_PHY_ADDR1 0x0
 628 #define SGMII_PHY_ADDR2 0x1
 629 #define SGMII_PHY_ADDR3 0x2
 630 #define SGMII_PHY_ADDR4 0x3
 631 #define SGMII_PHY_ADDR5 0x4
 632 #define SGMII_PHY_ADDR6 0x5
 633 #define SGMII_PHY_ADDR7 0x6
 634 #define SGMII_PHY_ADDR8 0x7
 635 #define FM1_10GEC1_PHY_ADDR     0x10
 636 #define FM1_10GEC2_PHY_ADDR     0x11
 637 #define FM2_10GEC1_PHY_ADDR     0x12
 638 #define FM2_10GEC2_PHY_ADDR     0x13
 639 #define CORTINA_PHY_ADDR1       FM1_10GEC1_PHY_ADDR
 640 #define CORTINA_PHY_ADDR2       FM1_10GEC2_PHY_ADDR
 641 #define CORTINA_PHY_ADDR3       FM2_10GEC1_PHY_ADDR
 642 #define CORTINA_PHY_ADDR4       FM2_10GEC2_PHY_ADDR
 643 #endif
 644
 645
 646 /* SATA */
 647 #ifdef CONFIG_FSL_SATA_V2
 648 #define CONFIG_LIBATA
 649 #define CONFIG_FSL_SATA
 650
 651 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 652 #define CONFIG_SATA1
 653 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 654 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 655 #define CONFIG_SATA2
 656 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 657 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 658
 659 #define CONFIG_LBA48
 660 #define CONFIG_CMD_SATA
 661 #define CONFIG_DOS_PARTITION
 662 #define CONFIG_CMD_EXT2
 663 #endif
 664
 665 #ifdef CONFIG_FMAN_ENET
 666 #define CONFIG_MII              /* MII PHY management */
 667 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 668 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 669 #endif
 670
 671 /*
 672 * USB
 673 */
 674 #define CONFIG_CMD_USB
 675 #define CONFIG_USB_STORAGE
 676 #define CONFIG_USB_EHCI
 677 #define CONFIG_USB_EHCI_FSL
 678 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 679 #define CONFIG_CMD_EXT2
 680 #define CONFIG_HAS_FSL_DR_USB
 681
 682 #define CONFIG_MMC
 683
 684 #ifdef CONFIG_MMC
 685 #define CONFIG_FSL_ESDHC
 686 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 687 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 688 #define CONFIG_CMD_MMC
 689 #define CONFIG_GENERIC_MMC
 690 #define CONFIG_CMD_EXT2
 691 #define CONFIG_CMD_FAT
 692 #define CONFIG_DOS_PARTITION
 693 #endif
 694
 695 /* Hash command with SHA acceleration supported in hardware */
 696 #ifdef CONFIG_FSL_CAAM
 697 #define CONFIG_CMD_HASH
 698 #define CONFIG_SHA_HW_ACCEL
 699 #endif
 700
 701 #define CONFIG_BOOTDELAY        10      /* -1 disables auto-boot */
 702
 703 #define __USB_PHY_TYPE  utmi
 704
 705 /*
 706  * T4240 has 3 DDR controllers. Default to 3-way interleaving. It can be
 707  * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to 2-way
 708  * interleaving. It can be cacheline, page, bank, superbank.
 709  * See doc/README.fsl-ddr for details.
 710  */
 711 #ifdef CONFIG_PPC_T4240
 712 #define CTRL_INTLV_PREFERED 3way_4KB
 713 #else
 714 #define CTRL_INTLV_PREFERED cacheline
 715 #endif
 716
 717 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 718         "hwconfig=fsl_ddr:"                                     \
 719         "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) ","      \
 720         "bank_intlv=auto;"                                      \
 721         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 722         "netdev=eth0\0"                                         \
 723         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 724         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 725         "tftpflash=tftpboot $loadaddr $uboot && "               \
 726         "protect off $ubootaddr +$filesize && "                 \
 727         "erase $ubootaddr +$filesize && "                       \
 728         "cp.b $loadaddr $ubootaddr $filesize && "               \
 729         "protect on $ubootaddr +$filesize && "                  \
 730         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 731         "consoledev=ttyS0\0"                                    \
 732         "ramdiskaddr=2000000\0"                                 \
 733         "ramdiskfile=t4240rdb/ramdisk.uboot\0"                  \
 734         "fdtaddr=c00000\0"                                      \
 735         "fdtfile=t4240rdb/t4240rdb.dtb\0"                       \
 736         "bdev=sda3\0"
 737
 738 #define CONFIG_HVBOOT                                   \
 739         "setenv bootargs config-addr=0x60000000; "      \
 740         "bootm 0x01000000 - 0x00f00000"
 741
 742 #define CONFIG_LINUX                                    \
 743         "setenv bootargs root=/dev/ram rw "             \
 744         "console=$consoledev,$baudrate $othbootargs;"   \
 745         "setenv ramdiskaddr 0x02000000;"                \
 746         "setenv fdtaddr 0x00c00000;"                    \
 747         "setenv loadaddr 0x1000000;"                    \
 748         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 749
 750 #define CONFIG_HDBOOT                                   \
 751         "setenv bootargs root=/dev/$bdev rw "           \
 752         "console=$consoledev,$baudrate $othbootargs;"   \
 753         "tftp $loadaddr $bootfile;"                     \
 754         "tftp $fdtaddr $fdtfile;"                       \
 755         "bootm $loadaddr - $fdtaddr"
 756
 757 #define CONFIG_NFSBOOTCOMMAND                   \
 758         "setenv bootargs root=/dev/nfs rw "     \
 759         "nfsroot=$serverip:$rootpath "          \
 760         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 761         "console=$consoledev,$baudrate $othbootargs;"   \
 762         "tftp $loadaddr $bootfile;"             \
 763         "tftp $fdtaddr $fdtfile;"               \
 764         "bootm $loadaddr - $fdtaddr"
 765
 766 #define CONFIG_RAMBOOTCOMMAND                           \
 767         "setenv bootargs root=/dev/ram rw "             \
 768         "console=$consoledev,$baudrate $othbootargs;"   \
 769         "tftp $ramdiskaddr $ramdiskfile;"               \
 770         "tftp $loadaddr $bootfile;"                     \
 771         "tftp $fdtaddr $fdtfile;"                       \
 772         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 773
 774 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 775
 776 #include <asm/fsl_secure_boot.h>
 777
 778 #ifdef CONFIG_SECURE_BOOT
 779 /* Secure Boot target was not getting build for T4240 because of
 780  * increased binary size. So the size is being reduced by removing USB
 781  * which is anyways not used in Secure Environment.
 782  */
 783 #undef CONFIG_CMD_USB
 784 #define CONFIG_CMD_BLOB
 785 #endif
 786
 787 #endif  /* __CONFIG_H */