include/configs/T4240RDB.h

   1 /*
   2  * Copyright 2014 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * T4240 RDB board configuration file
   9  */
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 #define CONFIG_T4240RDB
  14 #define CONFIG_PHYS_64BIT
  15
  16 #define CONFIG_FSL_SATA_V2
  17 #define CONFIG_PCIE4
  18
  19 #define CONFIG_ICS307_REFCLK_HZ         25000000  /* ICS307 ref clk freq */
  20
  21 #ifdef CONFIG_RAMBOOT_PBL
  22 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  23 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  24 #define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t4rdb/t4_pbi.cfg
  25 #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t4rdb/t4_rcw.cfg
  26 #endif
  27
  28 #define CONFIG_DDR_ECC
  29
  30 #define CONFIG_CMD_REGINFO
  31
  32 /* High Level Configuration Options */
  33 #define CONFIG_BOOKE
  34 #define CONFIG_E500                     /* BOOKE e500 family */
  35 #define CONFIG_E500MC                   /* BOOKE e500mc family */
  36 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  37 #define CONFIG_MP                       /* support multiple processors */
  38
  39 #ifndef CONFIG_SYS_TEXT_BASE
  40 #define CONFIG_SYS_TEXT_BASE    0xeff40000
  41 #endif
  42
  43 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  44 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  45 #endif
  46
  47 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  48 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
  49 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
  50 #define CONFIG_PCI                      /* Enable PCI/PCIE */
  51 #define CONFIG_PCIE1                    /* PCIE controler 1 */
  52 #define CONFIG_PCIE2                    /* PCIE controler 2 */
  53 #define CONFIG_PCIE3                    /* PCIE controler 3 */
  54 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  55 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  56
  57 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  58
  59 #define CONFIG_ENV_OVERWRITE
  60
  61 /*
  62  * These can be toggled for performance analysis, otherwise use default.
  63  */
  64 #define CONFIG_SYS_CACHE_STASHING
  65 #define CONFIG_BTB                      /* toggle branch predition */
  66 #ifdef CONFIG_DDR_ECC
  67 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
  68 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  69 #endif
  70
  71 #define CONFIG_ENABLE_36BIT_PHYS
  72
  73 #define CONFIG_ADDR_MAP
  74 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
  75
  76 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
  77 #define CONFIG_SYS_MEMTEST_END          0x00400000
  78 #define CONFIG_SYS_ALT_MEMTEST
  79 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
  80
  81 /*
  82  *  Config the L3 Cache as L3 SRAM
  83  */
  84 #define CONFIG_SYS_INIT_L3_ADDR         CONFIG_RAMBOOT_TEXT_BASE
  85
  86 #define CONFIG_SYS_DCSRBAR              0xf0000000
  87 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
  88
  89 /*
  90  * DDR Setup
  91  */
  92 #define CONFIG_VERY_BIG_RAM
  93 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
  94 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  95
  96 /* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */
  97 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
  98 #define CONFIG_CHIP_SELECTS_PER_CTRL    4
  99 #define CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
 100
 101 #define CONFIG_DDR_SPD
 102 #define CONFIG_SYS_FSL_DDR3
 103
 104
 105 /*
 106  * IFC Definitions
 107  */
 108 #define CONFIG_SYS_FLASH_BASE   0xe0000000
 109 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 110
 111
 112 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 113
 114 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
 115 #define CONFIG_MISC_INIT_R
 116
 117 #define CONFIG_HWCONFIG
 118
 119 /* define to use L1 as initial stack */
 120 #define CONFIG_L1_INIT_RAM
 121 #define CONFIG_SYS_INIT_RAM_LOCK
 122 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 123 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 124 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe0ec000
 125 /* The assembler doesn't like typecast */
 126 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 127         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 128           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 129 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 130
 131 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 132                                         GENERATED_GBL_DATA_SIZE)
 133 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 134
 135 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)
 136 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 137
 138 /* Serial Port - controlled on board with jumper J8
 139  * open - index 2
 140  * shorted - index 1
 141  */
 142 #define CONFIG_CONS_INDEX       1
 143 #define CONFIG_SYS_NS16550
 144 #define CONFIG_SYS_NS16550_SERIAL
 145 #define CONFIG_SYS_NS16550_REG_SIZE     1
 146 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 147
 148 #define CONFIG_SYS_BAUDRATE_TABLE       \
 149         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 150
 151 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 152 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 153 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 154 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 155
 156 /* Use the HUSH parser */
 157 #define CONFIG_SYS_HUSH_PARSER
 158 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 159
 160 /* pass open firmware flat tree */
 161 #define CONFIG_OF_LIBFDT
 162 #define CONFIG_OF_BOARD_SETUP
 163 #define CONFIG_OF_STDOUT_VIA_ALIAS
 164
 165 /* new uImage format support */
 166 #define CONFIG_FIT
 167 #define CONFIG_FIT_VERBOSE      /* enable fit_format_{error,warning}() */
 168
 169 /* I2C */
 170 #define CONFIG_SYS_I2C
 171 #define CONFIG_SYS_I2C_FSL
 172 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 173 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 174 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 175 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 176
 177 /*
 178  * General PCI
 179  * Memory space is mapped 1-1, but I/O space must start from 0.
 180  */
 181
 182 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 183 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 184 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 185 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 186 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 187 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 188 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 189 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 190 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 191
 192 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 193 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 194 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 195 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 196 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 197 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 198 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 199 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 200 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 201
 202 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 203 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xc0000000
 204 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 205 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc40000000ull
 206 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
 207 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 208 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 209 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 210 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 211
 212 /* controller 4, Base address 203000 */
 213 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 214 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc60000000ull
 215 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x20000000      /* 512M */
 216 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 217 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 218 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 219
 220 #ifdef CONFIG_PCI
 221 #define CONFIG_PCI_INDIRECT_BRIDGE
 222 #define CONFIG_NET_MULTI
 223 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 224 #define CONFIG_E1000
 225
 226 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 227 #define CONFIG_DOS_PARTITION
 228 #endif  /* CONFIG_PCI */
 229
 230 /* SATA */
 231 #ifdef CONFIG_FSL_SATA_V2
 232 #define CONFIG_LIBATA
 233 #define CONFIG_FSL_SATA
 234
 235 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 236 #define CONFIG_SATA1
 237 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 238 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 239 #define CONFIG_SATA2
 240 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 241 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 242
 243 #define CONFIG_LBA48
 244 #define CONFIG_CMD_SATA
 245 #define CONFIG_DOS_PARTITION
 246 #define CONFIG_CMD_EXT2
 247 #endif
 248
 249 #ifdef CONFIG_FMAN_ENET
 250 #define CONFIG_MII              /* MII PHY management */
 251 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 252 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 253 #endif
 254
 255 /*
 256  * Environment
 257  */
 258 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 259 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 260
 261 /*
 262  * Command line configuration.
 263  */
 264 #include <config_cmd_default.h>
 265
 266 #define CONFIG_CMD_DHCP
 267 #define CONFIG_CMD_ELF
 268 #define CONFIG_CMD_ERRATA
 269 #define CONFIG_CMD_GREPENV
 270 #define CONFIG_CMD_IRQ
 271 #define CONFIG_CMD_I2C
 272 #define CONFIG_CMD_MII
 273 #define CONFIG_CMD_PING
 274 #define CONFIG_CMD_SETEXPR
 275
 276 #ifdef CONFIG_PCI
 277 #define CONFIG_CMD_PCI
 278 #define CONFIG_CMD_NET
 279 #endif
 280
 281 /*
 282  * Miscellaneous configurable options
 283  */
 284 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 285 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 286 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 287 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 288 #ifdef CONFIG_CMD_KGDB
 289 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 290 #else
 291 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 292 #endif
 293 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 294 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 295 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 296
 297 /*
 298  * For booting Linux, the board info and command line data
 299  * have to be in the first 64 MB of memory, since this is
 300  * the maximum mapped by the Linux kernel during initialization.
 301  */
 302 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 303 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 304
 305 #ifdef CONFIG_CMD_KGDB
 306 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 307 #endif
 308
 309 /*
 310  * Environment Configuration
 311  */
 312 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 313 #define CONFIG_BOOTFILE         "uImage"
 314 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 315
 316 /* default location for tftp and bootm */
 317 #define CONFIG_LOADADDR         1000000
 318
 319
 320 #define CONFIG_BAUDRATE 115200
 321
 322 #define CONFIG_HVBOOT                                   \
 323         "setenv bootargs config-addr=0x60000000; "      \
 324         "bootm 0x01000000 - 0x00f00000"
 325
 326 #ifdef CONFIG_SYS_NO_FLASH
 327 #ifndef CONFIG_RAMBOOT_PBL
 328 #define CONFIG_ENV_IS_NOWHERE
 329 #endif
 330 #else
 331 #define CONFIG_FLASH_CFI_DRIVER
 332 #define CONFIG_SYS_FLASH_CFI
 333 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 334 #endif
 335
 336 #if defined(CONFIG_SPIFLASH)
 337 #define CONFIG_SYS_EXTRA_ENV_RELOC
 338 #define CONFIG_ENV_IS_IN_SPI_FLASH
 339 #define CONFIG_ENV_SPI_BUS              0
 340 #define CONFIG_ENV_SPI_CS               0
 341 #define CONFIG_ENV_SPI_MAX_HZ           10000000
 342 #define CONFIG_ENV_SPI_MODE             0
 343 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 344 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 345 #define CONFIG_ENV_SECT_SIZE            0x10000
 346 #elif defined(CONFIG_SDCARD)
 347 #define CONFIG_SYS_EXTRA_ENV_RELOC
 348 #define CONFIG_ENV_IS_IN_MMC
 349 #define CONFIG_SYS_MMC_ENV_DEV          0
 350 #define CONFIG_ENV_SIZE                 0x2000
 351 #define CONFIG_ENV_OFFSET               (512 * 1658)
 352 #elif defined(CONFIG_NAND)
 353 #define CONFIG_SYS_EXTRA_ENV_RELOC
 354 #define CONFIG_ENV_IS_IN_NAND
 355 #define CONFIG_ENV_SIZE                 CONFIG_SYS_NAND_BLOCK_SIZE
 356 #define CONFIG_ENV_OFFSET               (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
 357 #elif defined(CONFIG_ENV_IS_NOWHERE)
 358 #define CONFIG_ENV_SIZE         0x2000
 359 #else
 360 #define CONFIG_ENV_IS_IN_FLASH
 361 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 362 #define CONFIG_ENV_SIZE         0x2000
 363 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 364 #endif
 365
 366 #define CONFIG_SYS_CLK_FREQ     66666666
 367 #define CONFIG_DDR_CLK_FREQ     133333333
 368
 369 #ifndef __ASSEMBLY__
 370 unsigned long get_board_sys_clk(void);
 371 unsigned long get_board_ddr_clk(void);
 372 #endif
 373
 374 /*
 375  * DDR Setup
 376  */
 377 #define CONFIG_SYS_SPD_BUS_NUM  0
 378 #define SPD_EEPROM_ADDRESS1     0x52
 379 #define SPD_EEPROM_ADDRESS2     0x54
 380 #define SPD_EEPROM_ADDRESS3     0x56
 381 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1     /* for p3041/p5010 */
 382 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 383
 384 /*
 385  * IFC Definitions
 386  */
 387 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 388 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 389                                 + 0x8000000) | \
 390                                 CSPR_PORT_SIZE_16 | \
 391                                 CSPR_MSEL_NOR | \
 392                                 CSPR_V)
 393 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 394 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 395                                 CSPR_PORT_SIZE_16 | \
 396                                 CSPR_MSEL_NOR | \
 397                                 CSPR_V)
 398 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 399 /* NOR Flash Timing Params */
 400 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 401
 402 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 403                                 FTIM0_NOR_TEADC(0x5) | \
 404                                 FTIM0_NOR_TEAHC(0x5))
 405 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 406                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 407                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 408 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 409                                 FTIM2_NOR_TCH(0x4) | \
 410                                 FTIM2_NOR_TWPH(0x0E) | \
 411                                 FTIM2_NOR_TWP(0x1c))
 412 #define CONFIG_SYS_NOR_FTIM3    0x0
 413
 414 #define CONFIG_SYS_FLASH_QUIET_TEST
 415 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 416
 417 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 418 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 419 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 420 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 421
 422 #define CONFIG_SYS_FLASH_EMPTY_INFO
 423 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 424                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 425
 426 /* NAND Flash on IFC */
 427 #define CONFIG_NAND_FSL_IFC
 428 #define CONFIG_SYS_NAND_MAX_ECCPOS      256
 429 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
 430 #define CONFIG_SYS_NAND_BASE            0xff800000
 431 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 432
 433 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 434 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 435                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 436                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 437                                 | CSPR_V)
 438 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 439
 440 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 441                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 442                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 443                                 | CSOR_NAND_RAL_3       /* RAL = 2Byes */ \
 444                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 445                                 | CSOR_NAND_SPRZ_224    /* Spare size = 224 */ \
 446                                 | CSOR_NAND_PB(128))    /*Page Per Block = 128*/
 447
 448 #define CONFIG_SYS_NAND_ONFI_DETECTION
 449
 450 /* ONFI NAND Flash mode0 Timing Params */
 451 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 452                                         FTIM0_NAND_TWP(0x18)   | \
 453                                         FTIM0_NAND_TWCHT(0x07) | \
 454                                         FTIM0_NAND_TWH(0x0a))
 455 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 456                                         FTIM1_NAND_TWBE(0x39)  | \
 457                                         FTIM1_NAND_TRR(0x0e)   | \
 458                                         FTIM1_NAND_TRP(0x18))
 459 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 460                                         FTIM2_NAND_TREH(0x0a) | \
 461                                         FTIM2_NAND_TWHRE(0x1e))
 462 #define CONFIG_SYS_NAND_FTIM3           0x0
 463
 464 #define CONFIG_SYS_NAND_DDR_LAW         11
 465 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 466 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 467 #define CONFIG_MTD_NAND_VERIFY_WRITE
 468 #define CONFIG_CMD_NAND
 469
 470 #define CONFIG_SYS_NAND_BLOCK_SIZE      (512 * 1024)
 471
 472 #if defined(CONFIG_NAND)
 473 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 474 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 475 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 476 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 477 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 478 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 479 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 480 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 481 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 482 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR0_CSPR
 483 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 484 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 485 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 486 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 487 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 488 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 489 #else
 490 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 491 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 492 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 493 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 494 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 495 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 496 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 497 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 498 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NAND_CSPR_EXT
 499 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 500 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 501 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 502 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 503 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 504 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 505 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 506 #endif
 507 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 508 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR1_CSPR
 509 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 510 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 511 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 512 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 513 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 514 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 515
 516 #if defined(CONFIG_RAMBOOT_PBL)
 517 #define CONFIG_SYS_RAMBOOT
 518 #endif
 519
 520
 521 /* I2C */
 522 #define CONFIG_SYS_FSL_I2C_SPEED        100000  /* I2C speed */
 523 #define CONFIG_SYS_FSL_I2C2_SPEED       100000  /* I2C2 speed */
 524 #define I2C_MUX_PCA_ADDR_PRI            0x77 /* I2C bus multiplexer,primary */
 525 #define I2C_MUX_PCA_ADDR_SEC            0x76 /* I2C bus multiplexer,secondary */
 526
 527 #define I2C_MUX_CH_DEFAULT      0x8
 528 #define I2C_MUX_CH_VOL_MONITOR  0xa
 529 #define I2C_MUX_CH_VSC3316_FS   0xc
 530 #define I2C_MUX_CH_VSC3316_BS   0xd
 531
 532 /* Voltage monitor on channel 2*/
 533 #define I2C_VOL_MONITOR_ADDR            0x40
 534 #define I2C_VOL_MONITOR_BUS_V_OFFSET    0x2
 535 #define I2C_VOL_MONITOR_BUS_V_OVF       0x1
 536 #define I2C_VOL_MONITOR_BUS_V_SHIFT     3
 537
 538 /*
 539  * eSPI - Enhanced SPI
 540  */
 541 #define CONFIG_FSL_ESPI
 542 #define CONFIG_SPI_FLASH
 543 #define CONFIG_SPI_FLASH_SST
 544 #define CONFIG_CMD_SF
 545 #define CONFIG_SF_DEFAULT_SPEED         10000000
 546 #define CONFIG_SF_DEFAULT_MODE          0
 547
 548
 549 /* Qman/Bman */
 550 #ifndef CONFIG_NOBQFMAN
 551 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 552 #define CONFIG_SYS_BMAN_NUM_PORTALS     50
 553 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 554 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 555 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 556 #define CONFIG_SYS_QMAN_NUM_PORTALS     50
 557 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 558 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 559 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 560
 561 #define CONFIG_SYS_DPAA_FMAN
 562 #define CONFIG_SYS_DPAA_PME
 563 #define CONFIG_SYS_PMAN
 564 #define CONFIG_SYS_DPAA_DCE
 565 #define CONFIG_SYS_DPAA_RMAN
 566 #define CONFIG_SYS_INTERLAKEN
 567
 568 /* Default address of microcode for the Linux Fman driver */
 569 #if defined(CONFIG_SPIFLASH)
 570 /*
 571  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 572  * env, so we got 0x110000.
 573  */
 574 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 575 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 576 #elif defined(CONFIG_SDCARD)
 577 /*
 578  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 579  * about 825KB (1650 blocks), Env is stored after the image, and the env size is
 580  * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
 581  */
 582 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 583 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680)
 584 #elif defined(CONFIG_NAND)
 585 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 586 #define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE)
 587 #else
 588 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 589 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000
 590 #endif
 591 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 592 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 593 #endif /* CONFIG_NOBQFMAN */
 594
 595 #ifdef CONFIG_SYS_DPAA_FMAN
 596 #define CONFIG_FMAN_ENET
 597 #define CONFIG_PHYLIB_10G
 598 #define CONFIG_PHY_VITESSE
 599 #define CONFIG_PHY_CORTINA
 600 #define CONFIG_CORTINA_FW_ADDR          0xefe00000
 601 #define CONFIG_CORTINA_FW_LENGTH        0x40000
 602 #define CONFIG_PHY_TERANETICS
 603 #define SGMII_PHY_ADDR1 0x0
 604 #define SGMII_PHY_ADDR2 0x1
 605 #define SGMII_PHY_ADDR3 0x2
 606 #define SGMII_PHY_ADDR4 0x3
 607 #define SGMII_PHY_ADDR5 0x4
 608 #define SGMII_PHY_ADDR6 0x5
 609 #define SGMII_PHY_ADDR7 0x6
 610 #define SGMII_PHY_ADDR8 0x7
 611 #define FM1_10GEC1_PHY_ADDR     0x10
 612 #define FM1_10GEC2_PHY_ADDR     0x11
 613 #define FM2_10GEC1_PHY_ADDR     0x12
 614 #define FM2_10GEC2_PHY_ADDR     0x13
 615 #define CORTINA_PHY_ADDR1       FM1_10GEC1_PHY_ADDR
 616 #define CORTINA_PHY_ADDR2       FM1_10GEC2_PHY_ADDR
 617 #define CORTINA_PHY_ADDR3       FM2_10GEC1_PHY_ADDR
 618 #define CORTINA_PHY_ADDR4       FM2_10GEC2_PHY_ADDR
 619 #endif
 620
 621
 622 /* SATA */
 623 #ifdef CONFIG_FSL_SATA_V2
 624 #define CONFIG_LIBATA
 625 #define CONFIG_FSL_SATA
 626
 627 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 628 #define CONFIG_SATA1
 629 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 630 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 631 #define CONFIG_SATA2
 632 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 633 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 634
 635 #define CONFIG_LBA48
 636 #define CONFIG_CMD_SATA
 637 #define CONFIG_DOS_PARTITION
 638 #define CONFIG_CMD_EXT2
 639 #endif
 640
 641 #ifdef CONFIG_FMAN_ENET
 642 #define CONFIG_MII              /* MII PHY management */
 643 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 644 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 645 #endif
 646
 647 /*
 648 * USB
 649 */
 650 #define CONFIG_CMD_USB
 651 #define CONFIG_USB_STORAGE
 652 #define CONFIG_USB_EHCI
 653 #define CONFIG_USB_EHCI_FSL
 654 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 655 #define CONFIG_CMD_EXT2
 656 #define CONFIG_HAS_FSL_DR_USB
 657
 658 #define CONFIG_MMC
 659
 660 #ifdef CONFIG_MMC
 661 #define CONFIG_FSL_ESDHC
 662 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 663 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 664 #define CONFIG_CMD_MMC
 665 #define CONFIG_GENERIC_MMC
 666 #define CONFIG_CMD_EXT2
 667 #define CONFIG_CMD_FAT
 668 #define CONFIG_DOS_PARTITION
 669 #endif
 670
 671 #define CONFIG_BOOTDELAY        10      /* -1 disables auto-boot */
 672
 673 #define __USB_PHY_TYPE  utmi
 674
 675 /*
 676  * T4240 has 3 DDR controllers. Default to 3-way interleaving. It can be
 677  * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to 2-way
 678  * interleaving. It can be cacheline, page, bank, superbank.
 679  * See doc/README.fsl-ddr for details.
 680  */
 681 #ifdef CONFIG_PPC_T4240
 682 #define CTRL_INTLV_PREFERED 3way_4KB
 683 #else
 684 #define CTRL_INTLV_PREFERED cacheline
 685 #endif
 686
 687 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 688         "hwconfig=fsl_ddr:"                                     \
 689         "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) ","      \
 690         "bank_intlv=auto;"                                      \
 691         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 692         "netdev=eth0\0"                                         \
 693         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 694         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 695         "tftpflash=tftpboot $loadaddr $uboot && "               \
 696         "protect off $ubootaddr +$filesize && "                 \
 697         "erase $ubootaddr +$filesize && "                       \
 698         "cp.b $loadaddr $ubootaddr $filesize && "               \
 699         "protect on $ubootaddr +$filesize && "                  \
 700         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 701         "consoledev=ttyS0\0"                                    \
 702         "ramdiskaddr=2000000\0"                                 \
 703         "ramdiskfile=t4240rdb/ramdisk.uboot\0"                  \
 704         "fdtaddr=c00000\0"                                      \
 705         "fdtfile=t4240rdb/t4240rdb.dtb\0"                       \
 706         "bdev=sda3\0"
 707
 708 #define CONFIG_HVBOOT                                   \
 709         "setenv bootargs config-addr=0x60000000; "      \
 710         "bootm 0x01000000 - 0x00f00000"
 711
 712 #define CONFIG_LINUX                                    \
 713         "setenv bootargs root=/dev/ram rw "             \
 714         "console=$consoledev,$baudrate $othbootargs;"   \
 715         "setenv ramdiskaddr 0x02000000;"                \
 716         "setenv fdtaddr 0x00c00000;"                    \
 717         "setenv loadaddr 0x1000000;"                    \
 718         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 719
 720 #define CONFIG_HDBOOT                                   \
 721         "setenv bootargs root=/dev/$bdev rw "           \
 722         "console=$consoledev,$baudrate $othbootargs;"   \
 723         "tftp $loadaddr $bootfile;"                     \
 724         "tftp $fdtaddr $fdtfile;"                       \
 725         "bootm $loadaddr - $fdtaddr"
 726
 727 #define CONFIG_NFSBOOTCOMMAND                   \
 728         "setenv bootargs root=/dev/nfs rw "     \
 729         "nfsroot=$serverip:$rootpath "          \
 730         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 731         "console=$consoledev,$baudrate $othbootargs;"   \
 732         "tftp $loadaddr $bootfile;"             \
 733         "tftp $fdtaddr $fdtfile;"               \
 734         "bootm $loadaddr - $fdtaddr"
 735
 736 #define CONFIG_RAMBOOTCOMMAND                           \
 737         "setenv bootargs root=/dev/ram rw "             \
 738         "console=$consoledev,$baudrate $othbootargs;"   \
 739         "tftp $ramdiskaddr $ramdiskfile;"               \
 740         "tftp $loadaddr $bootfile;"                     \
 741         "tftp $fdtaddr $fdtfile;"                       \
 742         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 743
 744 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 745
 746 #include <asm/fsl_secure_boot.h>
 747
 748 #ifdef CONFIG_SECURE_BOOT
 749 /* Secure Boot target was not getting build for T4240 because of
 750  * increased binary size. So the size is being reduced by removing USB
 751  * which is anyways not used in Secure Environment.
 752  */
 753 #undef CONFIG_CMD_USB
 754 #endif
 755
 756 #endif  /* __CONFIG_H */