include/configs/TQM823L.h

   1 /*
   2  * (C) Copyright 2000, 2001, 2002
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  *
   5  * See file CREDITS for list of people who contributed to this
   6  * project.
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of
  11  * the License, or (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21  * MA 02111-1307 USA
  22  */
  23
  24 /*
  25  * board/config.h - configuration options, board specific
  26  */
  27
  28 #ifndef __CONFIG_H
  29 #define __CONFIG_H
  30
  31 /*
  32  * High Level Configuration Options
  33  * (easy to change)
  34  */
  35
  36 #define CONFIG_MPC823           1       /* This is a MPC823 CPU         */
  37 #define CONFIG_TQM823L          1       /* ...on a TQM8xxL module       */
  38
  39 #ifdef  CONFIG_LCD                      /* with LCD controller ?        */
  40 /* #define CONFIG_NEC_NL6648BC20 1 / * use NEC NL6648BC20 display       */
  41 #endif
  42
  43 #define CONFIG_8xx_CONS_SMC1    1       /* Console is on SMC1           */
  44 #undef  CONFIG_8xx_CONS_SMC2
  45 #undef  CONFIG_8xx_CONS_NONE
  46 #define CONFIG_BAUDRATE         115200  /* console baudrate = 115kbps   */
  47 #if 0
  48 #define CONFIG_BOOTDELAY        -1      /* autoboot disabled            */
  49 #else
  50 #define CONFIG_BOOTDELAY        5       /* autoboot after 5 seconds     */
  51 #endif
  52
  53 #define CONFIG_CLOCKS_IN_MHZ    1       /* clocks passsed to Linux in MHz */
  54
  55 #define CONFIG_BOARD_TYPES      1       /* support board types          */
  56
  57 #define CONFIG_PREBOOT  "echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo"
  58
  59 #undef  CONFIG_BOOTARGS
  60
  61 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
  62         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
  63                 "nfsroot=$(serverip):$(rootpath)\0"                     \
  64         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
  65         "addip=setenv bootargs $(bootargs) "                            \
  66                 "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)"      \
  67                 ":$(hostname):$(netdev):off panic=1\0"                  \
  68         "flash_nfs=run nfsargs addip;"                                  \
  69                 "bootm $(kernel_addr)\0"                                \
  70         "flash_self=run ramargs addip;"                                 \
  71                 "bootm $(kernel_addr) $(ramdisk_addr)\0"                \
  72         "net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0"     \
  73         "rootpath=/opt/eldk/ppc_8xx\0"                                  \
  74         "bootfile=/tftpboot/TQM860L/pImage\0"                           \
  75         "kernel_addr=40040000\0"                                        \
  76         "ramdisk_addr=40100000\0"                                       \
  77         ""
  78 #define CONFIG_BOOTCOMMAND      "run flash_self"
  79
  80 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download  */
  81 #undef  CFG_LOADS_BAUD_CHANGE           /* don't allow baudrate change  */
  82
  83 #undef  CONFIG_WATCHDOG                 /* watchdog disabled            */
  84
  85 #ifdef CONFIG_LCD
  86 # undef  CONFIG_STATUS_LED              /* disturbs display             */
  87 #else
  88 # define CONFIG_STATUS_LED      1       /* Status LED enabled           */
  89 #endif  /* CONFIG_LCD */
  90
  91 #undef  CONFIG_CAN_DRIVER               /* CAN Driver support disabled  */
  92
  93 #define CONFIG_BOOTP_MASK       (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
  94
  95 #define CONFIG_MAC_PARTITION
  96 #define CONFIG_DOS_PARTITION
  97
  98 #define CONFIG_RTC_MPC8xx               /* use internal RTC of MPC8xx   */
  99
 100 #define CONFIG_COMMANDS       ( CONFIG_CMD_DFL  | \
 101                                 CFG_CMD_ASKENV  | \
 102                                 CFG_CMD_DHCP    | \
 103                                 CFG_CMD_IDE     | \
 104                                 CFG_CMD_DATE    )
 105
 106 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 107 #include <cmd_confdefs.h>
 108
 109 /*
 110  * Miscellaneous configurable options
 111  */
 112 #define CFG_LONGHELP                    /* undef to save memory         */
 113 #define CFG_PROMPT              "=> "   /* Monitor Command Prompt       */
 114
 115 #if 0
 116 #define CFG_HUSH_PARSER         1       /* use "hush" command parser    */
 117 #endif
 118 #ifdef  CFG_HUSH_PARSER
 119 #define CFG_PROMPT_HUSH_PS2     "> "
 120 #endif
 121
 122 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
 123 #define CFG_CBSIZE              1024    /* Console I/O Buffer Size      */
 124 #else
 125 #define CFG_CBSIZE              256     /* Console I/O Buffer Size      */
 126 #endif
 127 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
 128 #define CFG_MAXARGS             16      /* max number of command args   */
 129 #define CFG_BARGSIZE    CFG_CBSIZE      /* Boot Argument Buffer Size    */
 130
 131 #define CFG_MEMTEST_START       0x0400000       /* memtest works on     */
 132 #define CFG_MEMTEST_END         0x0C00000       /* 4 ... 12 MB in DRAM  */
 133
 134 #define CFG_LOAD_ADDR           0x100000        /* default load address */
 135
 136 #define CFG_HZ                  1000    /* decrementer freq: 1 ms ticks */
 137
 138 #define CFG_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
 139
 140 /*
 141  * Low Level Configuration Settings
 142  * (address mappings, register initial values, etc.)
 143  * You should know what you are doing if you make changes here.
 144  */
 145 /*-----------------------------------------------------------------------
 146  * Internal Memory Mapped Register
 147  */
 148 #define CFG_IMMR                0xFFF00000
 149
 150 /*-----------------------------------------------------------------------
 151  * Definitions for initial stack pointer and data area (in DPRAM)
 152  */
 153 #define CFG_INIT_RAM_ADDR       CFG_IMMR
 154 #define CFG_INIT_RAM_END        0x2F00  /* End of used area in DPRAM    */
 155 #define CFG_GBL_DATA_SIZE       64  /* size in bytes reserved for initial data */
 156 #define CFG_GBL_DATA_OFFSET     (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 157 #define CFG_INIT_SP_OFFSET      CFG_GBL_DATA_OFFSET
 158
 159 /*-----------------------------------------------------------------------
 160  * Start addresses for the final memory configuration
 161  * (Set up by the startup code)
 162  * Please note that CFG_SDRAM_BASE _must_ start at 0
 163  */
 164 #define CFG_SDRAM_BASE          0x00000000
 165 #define CFG_FLASH_BASE          0x40000000
 166 #define CFG_MONITOR_LEN         (256 << 10)     /* Reserve 256 kB for Monitor   */
 167 #define CFG_MONITOR_BASE        CFG_FLASH_BASE
 168 #define CFG_MALLOC_LEN          (128 << 10)     /* Reserve 128 kB for malloc()  */
 169
 170 /*
 171  * For booting Linux, the board info and command line data
 172  * have to be in the first 8 MB of memory, since this is
 173  * the maximum mapped by the Linux kernel during initialization.
 174  */
 175 #define CFG_BOOTMAPSZ           (8 << 20)       /* Initial Memory map for Linux */
 176
 177 /*-----------------------------------------------------------------------
 178  * FLASH organization
 179  */
 180 #define CFG_MAX_FLASH_BANKS     2       /* max number of memory banks           */
 181 #define CFG_MAX_FLASH_SECT      67      /* max number of sectors on one chip    */
 182
 183 #define CFG_FLASH_ERASE_TOUT    120000  /* Timeout for Flash Erase (in ms)      */
 184 #define CFG_FLASH_WRITE_TOUT    500     /* Timeout for Flash Write (in ms)      */
 185
 186 #define CFG_ENV_IS_IN_FLASH     1
 187 #define CFG_ENV_OFFSET          0x8000  /*   Offset   of Environment Sector     */
 188 #define CFG_ENV_SIZE            0x4000  /* Total Size of Environment Sector     */
 189
 190 /* Address and size of Redundant Environment Sector     */
 191 #define CFG_ENV_OFFSET_REDUND   (CFG_ENV_OFFSET+CFG_ENV_SIZE)
 192 #define CFG_ENV_SIZE_REDUND     (CFG_ENV_SIZE)
 193
 194 /*-----------------------------------------------------------------------
 195  * Hardware Information Block
 196  */
 197 #define CFG_HWINFO_OFFSET       0x0003FFC0      /* offset of HW Info block */
 198 #define CFG_HWINFO_SIZE         0x00000040      /* size   of HW Info block */
 199 #define CFG_HWINFO_MAGIC        0x54514D38      /* 'TQM8' */
 200
 201 /*-----------------------------------------------------------------------
 202  * Cache Configuration
 203  */
 204 #define CFG_CACHELINE_SIZE      16      /* For all MPC8xx CPUs                  */
 205 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
 206 #define CFG_CACHELINE_SHIFT     4       /* log base 2 of the above value        */
 207 #endif
 208
 209 /*-----------------------------------------------------------------------
 210  * SYPCR - System Protection Control                            11-9
 211  * SYPCR can only be written once after reset!
 212  *-----------------------------------------------------------------------
 213  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
 214  */
 215 #if defined(CONFIG_WATCHDOG)
 216 #define CFG_SYPCR       (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 217                          SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 218 #else
 219 #define CFG_SYPCR       (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 220 #endif
 221
 222 /*-----------------------------------------------------------------------
 223  * SIUMCR - SIU Module Configuration                            11-6
 224  *-----------------------------------------------------------------------
 225  * PCMCIA config., multi-function pin tri-state
 226  */
 227 #ifndef CONFIG_CAN_DRIVER
 228 #define CFG_SIUMCR      (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 229 #else   /* we must activate GPL5 in the SIUMCR for CAN */
 230 #define CFG_SIUMCR      (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 231 #endif  /* CONFIG_CAN_DRIVER */
 232
 233 /*-----------------------------------------------------------------------
 234  * TBSCR - Time Base Status and Control                         11-26
 235  *-----------------------------------------------------------------------
 236  * Clear Reference Interrupt Status, Timebase freezing enabled
 237  */
 238 #define CFG_TBSCR       (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 239
 240 /*-----------------------------------------------------------------------
 241  * RTCSC - Real-Time Clock Status and Control Register          11-27
 242  *-----------------------------------------------------------------------
 243  */
 244 #define CFG_RTCSC       (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
 245
 246 /*-----------------------------------------------------------------------
 247  * PISCR - Periodic Interrupt Status and Control                11-31
 248  *-----------------------------------------------------------------------
 249  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
 250  */
 251 #define CFG_PISCR       (PISCR_PS | PISCR_PITF)
 252
 253 /*-----------------------------------------------------------------------
 254  * PLPRCR - PLL, Low-Power, and Reset Control Register          15-30
 255  *-----------------------------------------------------------------------
 256  * Reset PLL lock status sticky bit, timer expired status bit and timer
 257  * interrupt status bit
 258  *
 259  * If this is a 80 MHz CPU, set PLL multiplication factor to 5 (5*16=80)!
 260  */
 261 #ifdef  CONFIG_80MHz    /* for 80 MHz, we use a 16 MHz clock * 5 */
 262 #define CFG_PLPRCR                                                      \
 263                 ( (5-1)<<PLPRCR_MF_SHIFT | PLPRCR_TEXPS | PLPRCR_TMIST )
 264 #else                   /* up to 50 MHz we use a 1:1 clock */
 265 #define CFG_PLPRCR      (PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
 266 #endif  /* CONFIG_80MHz */
 267
 268 /*-----------------------------------------------------------------------
 269  * SCCR - System Clock and reset Control Register               15-27
 270  *-----------------------------------------------------------------------
 271  * Set clock output, timebase and RTC source and divider,
 272  * power management and some other internal clocks
 273  */
 274 #define SCCR_MASK       SCCR_EBDF11
 275 #ifdef  CONFIG_80MHz    /* for 80 MHz, we use a 16 MHz clock * 5 */
 276 #define CFG_SCCR        (/* SCCR_TBS  | */ \
 277                          SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 278                          SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 279                          SCCR_DFALCD00)
 280 #else                   /* up to 50 MHz we use a 1:1 clock */
 281 #define CFG_SCCR        (SCCR_TBS     | \
 282                          SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 283                          SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 284                          SCCR_DFALCD00)
 285 #endif  /* CONFIG_80MHz */
 286
 287 /*-----------------------------------------------------------------------
 288  * PCMCIA stuff
 289  *-----------------------------------------------------------------------
 290  *
 291  */
 292 #define CFG_PCMCIA_MEM_ADDR     (0xE0000000)
 293 #define CFG_PCMCIA_MEM_SIZE     ( 64 << 20 )
 294 #define CFG_PCMCIA_DMA_ADDR     (0xE4000000)
 295 #define CFG_PCMCIA_DMA_SIZE     ( 64 << 20 )
 296 #define CFG_PCMCIA_ATTRB_ADDR   (0xE8000000)
 297 #define CFG_PCMCIA_ATTRB_SIZE   ( 64 << 20 )
 298 #define CFG_PCMCIA_IO_ADDR      (0xEC000000)
 299 #define CFG_PCMCIA_IO_SIZE      ( 64 << 20 )
 300
 301 /*-----------------------------------------------------------------------
 302  * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
 303  *-----------------------------------------------------------------------
 304  */
 305
 306 #define CONFIG_IDE_8xx_PCCARD   1       /* Use IDE with PC Card Adapter */
 307
 308 #undef  CONFIG_IDE_8xx_DIRECT           /* Direct IDE    not supported  */
 309 #undef  CONFIG_IDE_LED                  /* LED   for ide not supported  */
 310 #undef  CONFIG_IDE_RESET                /* reset for ide not supported  */
 311
 312 #define CFG_IDE_MAXBUS          1       /* max. 1 IDE bus               */
 313 #define CFG_IDE_MAXDEVICE       1       /* max. 1 drive per IDE bus     */
 314
 315 #define CFG_ATA_IDE0_OFFSET     0x0000
 316
 317 #define CFG_ATA_BASE_ADDR       CFG_PCMCIA_MEM_ADDR
 318
 319 /* Offset for data I/O                  */
 320 #define CFG_ATA_DATA_OFFSET     (CFG_PCMCIA_MEM_SIZE + 0x320)
 321
 322 /* Offset for normal register accesses  */
 323 #define CFG_ATA_REG_OFFSET      (2 * CFG_PCMCIA_MEM_SIZE + 0x320)
 324
 325 /* Offset for alternate registers       */
 326 #define CFG_ATA_ALT_OFFSET      0x0100
 327
 328 /*-----------------------------------------------------------------------
 329  *
 330  *-----------------------------------------------------------------------
 331  *
 332  */
 333 /*#define       CFG_DER 0x2002000F*/
 334 #define CFG_DER 0
 335
 336 /*
 337  * Init Memory Controller:
 338  *
 339  * BR0/1 and OR0/1 (FLASH)
 340  */
 341
 342 #define FLASH_BASE0_PRELIM      0x40000000      /* FLASH bank #0        */
 343 #define FLASH_BASE1_PRELIM      0x60000000      /* FLASH bank #0        */
 344
 345 /* used to re-map FLASH both when starting from SRAM or FLASH:
 346  * restrict access enough to keep SRAM working (if any)
 347  * but not too much to meddle with FLASH accesses
 348  */
 349 #define CFG_REMAP_OR_AM         0x80000000      /* OR addr mask */
 350 #define CFG_PRELIM_OR_AM        0xE0000000      /* OR addr mask */
 351
 352 /*
 353  * FLASH timing:
 354  */
 355 #if   defined(CONFIG_80MHz)
 356 /* 80 MHz CPU - 40 MHz bus: ACS = 00, TRLX = 0, CSNT = 1, SCY = 3, EHTR = 1 */
 357 #define CFG_OR_TIMING_FLASH     (OR_ACS_DIV1  | 0       | OR_CSNT_SAM | \
 358                                  OR_SCY_3_CLK | OR_EHTR | OR_BI)
 359 #elif defined(CONFIG_66MHz)
 360 /* 66 MHz CPU - 66 MHz bus: ACS = 00, TRLX = 1, CSNT = 1, SCY = 3, EHTR = 1 */
 361 #define CFG_OR_TIMING_FLASH     (OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
 362                                  OR_SCY_3_CLK | OR_EHTR | OR_BI)
 363 #else           /*   50 MHz */
 364 /* 50 MHz CPU - 50 MHz bus: ACS = 00, TRLX = 1, CSNT = 1, SCY = 2, EHTR = 1 */
 365 #define CFG_OR_TIMING_FLASH     (OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
 366                                  OR_SCY_2_CLK | OR_EHTR | OR_BI)
 367 #endif  /*CONFIG_??MHz */
 368
 369 #define CFG_OR0_REMAP   (CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
 370 #define CFG_OR0_PRELIM  (CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
 371 #define CFG_BR0_PRELIM  ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
 372
 373 #define CFG_OR1_REMAP   CFG_OR0_REMAP
 374 #define CFG_OR1_PRELIM  CFG_OR0_PRELIM
 375 #define CFG_BR1_PRELIM  ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
 376
 377 /*
 378  * BR2/3 and OR2/3 (SDRAM)
 379  *
 380  */
 381 #define SDRAM_BASE2_PRELIM      0x00000000      /* SDRAM bank #0        */
 382 #define SDRAM_BASE3_PRELIM      0x20000000      /* SDRAM bank #1        */
 383 #define SDRAM_MAX_SIZE          0x04000000      /* max 64 MB per bank   */
 384
 385 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)      */
 386 #define CFG_OR_TIMING_SDRAM     0x00000A00
 387
 388 #define CFG_OR2_PRELIM  (CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM )
 389 #define CFG_BR2_PRELIM  ((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 390
 391 #ifndef CONFIG_CAN_DRIVER
 392 #define CFG_OR3_PRELIM  CFG_OR2_PRELIM
 393 #define CFG_BR3_PRELIM  ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 394 #else   /* CAN uses CS3#, so we can have only one SDRAM bank anyway */
 395 #define CFG_CAN_BASE            0xC0000000      /* CAN mapped at 0xC0000000     */
 396 #define CFG_CAN_OR_AM           0xFFFF8000      /* 32 kB address mask           */
 397 #define CFG_OR3_CAN             (CFG_CAN_OR_AM | OR_G5LA | OR_BI)
 398 #define CFG_BR3_CAN             ((CFG_CAN_BASE & BR_BA_MSK) | \
 399                                         BR_PS_8 | BR_MS_UPMB | BR_V )
 400 #endif  /* CONFIG_CAN_DRIVER */
 401
 402 /*
 403  * Memory Periodic Timer Prescaler
 404  *
 405  * The Divider for PTA (refresh timer) configuration is based on an
 406  * example SDRAM configuration (64 MBit, one bank). The adjustment to
 407  * the number of chip selects (NCS) and the actually needed refresh
 408  * rate is done by setting MPTPR.
 409  *
 410  * PTA is calculated from
 411  *      PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS)
 412  *
 413  *      gclk      CPU clock (not bus clock!)
 414  *      Trefresh  Refresh cycle * 4 (four word bursts used)
 415  *
 416  * 4096  Rows from SDRAM example configuration
 417  * 1000  factor s -> ms
 418  *   32  PTP (pre-divider from MPTPR) from SDRAM example configuration
 419  *    4  Number of refresh cycles per period
 420  *   64  Refresh cycle in ms per number of rows
 421  * --------------------------------------------
 422  * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000
 423  *
 424  * 50 MHz => 50.000.000 / Divider =  98
 425  * 66 Mhz => 66.000.000 / Divider = 129
 426  * 80 Mhz => 80.000.000 / Divider = 156
 427  */
 428 #if   defined(CONFIG_80MHz)
 429 #define CFG_MAMR_PTA            156
 430 #elif defined(CONFIG_66MHz)
 431 #define CFG_MAMR_PTA            129
 432 #else           /*   50 MHz */
 433 #define CFG_MAMR_PTA             98
 434 #endif  /*CONFIG_??MHz */
 435
 436 /*
 437  * For 16 MBit, refresh rates could be 31.3 us
 438  * (= 64 ms / 2K = 125 / quad bursts).
 439  * For a simpler initialization, 15.6 us is used instead.
 440  *
 441  * #define CFG_MPTPR_2BK_2K     MPTPR_PTP_DIV32         for 2 banks
 442  * #define CFG_MPTPR_1BK_2K     MPTPR_PTP_DIV64         for 1 bank
 443  */
 444 #define CFG_MPTPR_2BK_4K        MPTPR_PTP_DIV16         /* setting for 2 banks  */
 445 #define CFG_MPTPR_1BK_4K        MPTPR_PTP_DIV32         /* setting for 1 bank   */
 446
 447 /* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit         */
 448 #define CFG_MPTPR_2BK_8K        MPTPR_PTP_DIV8          /* setting for 2 banks  */
 449 #define CFG_MPTPR_1BK_8K        MPTPR_PTP_DIV16         /* setting for 1 bank   */
 450
 451 /*
 452  * MAMR settings for SDRAM
 453  */
 454
 455 /* 8 column SDRAM */
 456 #define CFG_MAMR_8COL   ((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE      |   \
 457                          MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |   \
 458                          MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 459 /* 9 column SDRAM */
 460 #define CFG_MAMR_9COL   ((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE      |   \
 461                          MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |   \
 462                          MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 463
 464
 465 /*
 466  * Internal Definitions
 467  *
 468  * Boot Flags
 469  */
 470 #define BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
 471 #define BOOTFLAG_WARM   0x02            /* Software reboot                      */
 472
 473 #endif  /* __CONFIG_H */