include/configs/TQM823L.h

   1 /*
   2  * (C) Copyright 2000-2014
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 /*
   9  * board/config.h - configuration options, board specific
  10  */
  11
  12 #ifndef __CONFIG_H
  13 #define __CONFIG_H
  14
  15 /*
  16  * High Level Configuration Options
  17  * (easy to change)
  18  */
  19
  20 #define CONFIG_MPC823           1       /* This is a MPC823 CPU         */
  21 #define CONFIG_TQM823L          1       /* ...on a TQM8xxL module       */
  22 #define CONFIG_SYS_GENERIC_BOARD
  23 #define CONFIG_DISPLAY_BOARDINFO
  24
  25 #define CONFIG_SYS_TEXT_BASE    0x40000000
  26
  27 #ifdef  CONFIG_LCD                      /* with LCD controller ?        */
  28 #define CONFIG_MPC8XX_LCD
  29 #define CONFIG_LCD_LOGO         1       /* print our logo on the LCD    */
  30 #define CONFIG_LCD_INFO         1       /* ... and some board info      */
  31 #define CONFIG_SPLASH_SCREEN            /* ... with splashscreen support*/
  32 #endif
  33
  34 #define CONFIG_8xx_CONS_SMC1    1       /* Console is on SMC1           */
  35 #define CONFIG_SYS_SMC_RXBUFLEN 128
  36 #define CONFIG_SYS_MAXIDLE      10
  37 #define CONFIG_BAUDRATE         115200  /* console baudrate = 115kbps   */
  38
  39 #define CONFIG_BOOTCOUNT_LIMIT
  40
  41 #define CONFIG_BOOTDELAY        5       /* autoboot after 5 seconds     */
  42
  43 #define CONFIG_BOARD_TYPES      1       /* support board types          */
  44
  45 #define CONFIG_PREBOOT  "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo"
  46
  47 #undef  CONFIG_BOOTARGS
  48
  49 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
  50         "netdev=eth0\0"                                                 \
  51         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
  52                 "nfsroot=${serverip}:${rootpath}\0"                     \
  53         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
  54         "addip=setenv bootargs ${bootargs} "                            \
  55                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
  56                 ":${hostname}:${netdev}:off panic=1\0"                  \
  57         "flash_nfs=run nfsargs addip;"                                  \
  58                 "bootm ${kernel_addr}\0"                                \
  59         "flash_self=run ramargs addip;"                                 \
  60                 "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
  61         "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"     \
  62         "rootpath=/opt/eldk/ppc_8xx\0"                                  \
  63         "hostname=TQM823L\0"                                            \
  64         "bootfile=TQM823L/uImage\0"                                     \
  65         "fdt_addr=40040000\0"                                           \
  66         "kernel_addr=40060000\0"                                        \
  67         "ramdisk_addr=40200000\0"                                       \
  68         "u-boot=TQM823L/u-image.bin\0"                                  \
  69         "load=tftp 200000 ${u-boot}\0"                                  \
  70         "update=prot off 40000000 +${filesize};"                        \
  71                 "era 40000000 +${filesize};"                            \
  72                 "cp.b 200000 40000000 ${filesize};"                     \
  73                 "sete filesize;save\0"                                  \
  74         ""
  75 #define CONFIG_BOOTCOMMAND      "run flash_self"
  76
  77 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download  */
  78 #undef  CONFIG_SYS_LOADS_BAUD_CHANGE            /* don't allow baudrate change  */
  79
  80 #undef  CONFIG_WATCHDOG                 /* watchdog disabled            */
  81
  82 #if defined(CONFIG_LCD)
  83 # undef  CONFIG_STATUS_LED              /* disturbs display             */
  84 #else
  85 # define CONFIG_STATUS_LED      1       /* Status LED enabled           */
  86 #endif  /* CONFIG_LCD */
  87
  88 #undef  CONFIG_CAN_DRIVER               /* CAN Driver support disabled  */
  89
  90 /*
  91  * BOOTP options
  92  */
  93 #define CONFIG_BOOTP_SUBNETMASK
  94 #define CONFIG_BOOTP_GATEWAY
  95 #define CONFIG_BOOTP_HOSTNAME
  96 #define CONFIG_BOOTP_BOOTPATH
  97 #define CONFIG_BOOTP_BOOTFILESIZE
  98
  99
 100 #define CONFIG_MAC_PARTITION
 101 #define CONFIG_DOS_PARTITION
 102
 103 #define CONFIG_RTC_MPC8xx               /* use internal RTC of MPC8xx   */
 104
 105
 106 /*
 107  * Command line configuration.
 108  */
 109 #define CONFIG_CMD_ASKENV
 110 #define CONFIG_CMD_DATE
 111 #define CONFIG_CMD_DHCP
 112 #define CONFIG_CMD_ELF
 113 #define CONFIG_CMD_EXT2
 114 #define CONFIG_CMD_IDE
 115 #define CONFIG_CMD_JFFS2
 116 #define CONFIG_CMD_SNTP
 117
 118 #ifdef  CONFIG_SPLASH_SCREEN
 119     #define CONFIG_CMD_BMP
 120 #endif
 121
 122
 123 #define CONFIG_NETCONSOLE
 124
 125 /*
 126  * Miscellaneous configurable options
 127  */
 128 #define CONFIG_SYS_LONGHELP                     /* undef to save memory         */
 129
 130 #define CONFIG_CMDLINE_EDITING  1       /* add command line history     */
 131 #define CONFIG_SYS_HUSH_PARSER          1       /* Use the HUSH parser          */
 132
 133 #if defined(CONFIG_CMD_KGDB)
 134 #define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size      */
 135 #else
 136 #define CONFIG_SYS_CBSIZE               256     /* Console I/O Buffer Size      */
 137 #endif
 138 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 139 #define CONFIG_SYS_MAXARGS              16      /* max number of command args   */
 140 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size    */
 141
 142 #define CONFIG_SYS_MEMTEST_START        0x0400000       /* memtest works on     */
 143 #define CONFIG_SYS_MEMTEST_END          0x0C00000       /* 4 ... 12 MB in DRAM  */
 144
 145 #define CONFIG_SYS_LOAD_ADDR            0x100000        /* default load address */
 146
 147 /*
 148  * Low Level Configuration Settings
 149  * (address mappings, register initial values, etc.)
 150  * You should know what you are doing if you make changes here.
 151  */
 152 /*-----------------------------------------------------------------------
 153  * Internal Memory Mapped Register
 154  */
 155 #define CONFIG_SYS_IMMR         0xFFF00000
 156
 157 /*-----------------------------------------------------------------------
 158  * Definitions for initial stack pointer and data area (in DPRAM)
 159  */
 160 #define CONFIG_SYS_INIT_RAM_ADDR        CONFIG_SYS_IMMR
 161 #define CONFIG_SYS_INIT_RAM_SIZE        0x2F00  /* Size of used area in DPRAM   */
 162 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 163 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 164
 165 /*-----------------------------------------------------------------------
 166  * Start addresses for the final memory configuration
 167  * (Set up by the startup code)
 168  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 169  */
 170 #define CONFIG_SYS_SDRAM_BASE           0x00000000
 171 #define CONFIG_SYS_FLASH_BASE           0x40000000
 172 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 256 kB for Monitor   */
 173 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
 174 #define CONFIG_SYS_MALLOC_LEN           (128 << 10)     /* Reserve 128 kB for malloc()  */
 175
 176 /*
 177  * For booting Linux, the board info and command line data
 178  * have to be in the first 8 MB of memory, since this is
 179  * the maximum mapped by the Linux kernel during initialization.
 180  */
 181 #define CONFIG_SYS_BOOTMAPSZ            (8 << 20)       /* Initial Memory map for Linux */
 182
 183 /*-----------------------------------------------------------------------
 184  * FLASH organization
 185  */
 186
 187 /* use CFI flash driver */
 188 #define CONFIG_SYS_FLASH_CFI            1       /* Flash is CFI conformant */
 189 #define CONFIG_FLASH_CFI_DRIVER 1       /* Use the common driver */
 190 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE+flash_info[0].size }
 191 #define CONFIG_SYS_FLASH_EMPTY_INFO
 192 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE       1
 193 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* max number of memory banks */
 194 #define CONFIG_SYS_MAX_FLASH_SECT       71      /* max number of sectors on one chip */
 195
 196 #define CONFIG_ENV_IS_IN_FLASH  1
 197 #define CONFIG_ENV_OFFSET               0x8000  /*   Offset   of Environment Sector     */
 198 #define CONFIG_ENV_SIZE         0x4000  /* Total Size of Environment Sector     */
 199
 200 /* Address and size of Redundant Environment Sector     */
 201 #define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET+CONFIG_ENV_SIZE)
 202 #define CONFIG_ENV_SIZE_REDUND  (CONFIG_ENV_SIZE)
 203
 204 #define CONFIG_SYS_USE_PPCENV                   /* Environment embedded in sect .ppcenv */
 205
 206 #define CONFIG_MISC_INIT_R              /* Make sure to remap flashes correctly */
 207
 208 /*-----------------------------------------------------------------------
 209  * Dynamic MTD partition support
 210  */
 211 #define CONFIG_CMD_MTDPARTS
 212 #define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */
 213 #define CONFIG_FLASH_CFI_MTD
 214 #define MTDIDS_DEFAULT          "nor0=TQM8xxL-0"
 215
 216 #define MTDPARTS_DEFAULT        "mtdparts=TQM8xxL-0:256k(u-boot),"      \
 217                                                 "128k(dtb),"            \
 218                                                 "1664k(kernel),"        \
 219                                                 "2m(rootfs),"           \
 220                                                 "4m(data)"
 221
 222 /*-----------------------------------------------------------------------
 223  * Hardware Information Block
 224  */
 225 #define CONFIG_SYS_HWINFO_OFFSET        0x0003FFC0      /* offset of HW Info block */
 226 #define CONFIG_SYS_HWINFO_SIZE          0x00000040      /* size   of HW Info block */
 227 #define CONFIG_SYS_HWINFO_MAGIC 0x54514D38      /* 'TQM8' */
 228
 229 /*-----------------------------------------------------------------------
 230  * Cache Configuration
 231  */
 232 #define CONFIG_SYS_CACHELINE_SIZE       16      /* For all MPC8xx CPUs                  */
 233 #if defined(CONFIG_CMD_KGDB)
 234 #define CONFIG_SYS_CACHELINE_SHIFT      4       /* log base 2 of the above value        */
 235 #endif
 236
 237 /*-----------------------------------------------------------------------
 238  * SYPCR - System Protection Control                            11-9
 239  * SYPCR can only be written once after reset!
 240  *-----------------------------------------------------------------------
 241  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
 242  */
 243 #if defined(CONFIG_WATCHDOG)
 244 #define CONFIG_SYS_SYPCR        (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 245                          SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 246 #else
 247 #define CONFIG_SYS_SYPCR        (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 248 #endif
 249
 250 /*-----------------------------------------------------------------------
 251  * SIUMCR - SIU Module Configuration                            11-6
 252  *-----------------------------------------------------------------------
 253  * PCMCIA config., multi-function pin tri-state
 254  */
 255 #ifndef CONFIG_CAN_DRIVER
 256 #define CONFIG_SYS_SIUMCR       (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 257 #else   /* we must activate GPL5 in the SIUMCR for CAN */
 258 #define CONFIG_SYS_SIUMCR       (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 259 #endif  /* CONFIG_CAN_DRIVER */
 260
 261 /*-----------------------------------------------------------------------
 262  * TBSCR - Time Base Status and Control                         11-26
 263  *-----------------------------------------------------------------------
 264  * Clear Reference Interrupt Status, Timebase freezing enabled
 265  */
 266 #define CONFIG_SYS_TBSCR        (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 267
 268 /*-----------------------------------------------------------------------
 269  * RTCSC - Real-Time Clock Status and Control Register          11-27
 270  *-----------------------------------------------------------------------
 271  */
 272 #define CONFIG_SYS_RTCSC        (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
 273
 274 /*-----------------------------------------------------------------------
 275  * PISCR - Periodic Interrupt Status and Control                11-31
 276  *-----------------------------------------------------------------------
 277  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
 278  */
 279 #define CONFIG_SYS_PISCR        (PISCR_PS | PISCR_PITF)
 280
 281 /*-----------------------------------------------------------------------
 282  * PLPRCR - PLL, Low-Power, and Reset Control Register          15-30
 283  *-----------------------------------------------------------------------
 284  * Reset PLL lock status sticky bit, timer expired status bit and timer
 285  * interrupt status bit
 286  */
 287 #define CONFIG_SYS_PLPRCR       (PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
 288
 289 /*-----------------------------------------------------------------------
 290  * SCCR - System Clock and reset Control Register               15-27
 291  *-----------------------------------------------------------------------
 292  * Set clock output, timebase and RTC source and divider,
 293  * power management and some other internal clocks
 294  */
 295 #define SCCR_MASK       SCCR_EBDF11
 296 #define CONFIG_SYS_SCCR (SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 297                          SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 298                          SCCR_DFALCD00)
 299
 300 /*-----------------------------------------------------------------------
 301  * PCMCIA stuff
 302  *-----------------------------------------------------------------------
 303  *
 304  */
 305 #define CONFIG_SYS_PCMCIA_MEM_ADDR      (0xE0000000)
 306 #define CONFIG_SYS_PCMCIA_MEM_SIZE      ( 64 << 20 )
 307 #define CONFIG_SYS_PCMCIA_DMA_ADDR      (0xE4000000)
 308 #define CONFIG_SYS_PCMCIA_DMA_SIZE      ( 64 << 20 )
 309 #define CONFIG_SYS_PCMCIA_ATTRB_ADDR    (0xE8000000)
 310 #define CONFIG_SYS_PCMCIA_ATTRB_SIZE    ( 64 << 20 )
 311 #define CONFIG_SYS_PCMCIA_IO_ADDR       (0xEC000000)
 312 #define CONFIG_SYS_PCMCIA_IO_SIZE       ( 64 << 20 )
 313
 314 /*-----------------------------------------------------------------------
 315  * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
 316  *-----------------------------------------------------------------------
 317  */
 318
 319 #define CONFIG_IDE_PREINIT      1       /* Use preinit IDE hook */
 320 #define CONFIG_IDE_8xx_PCCARD   1       /* Use IDE with PC Card Adapter */
 321
 322 #undef  CONFIG_IDE_8xx_DIRECT           /* Direct IDE    not supported  */
 323 #undef  CONFIG_IDE_LED                  /* LED   for ide not supported  */
 324 #undef  CONFIG_IDE_RESET                /* reset for ide not supported  */
 325
 326 #define CONFIG_SYS_IDE_MAXBUS           1       /* max. 1 IDE bus               */
 327 #define CONFIG_SYS_IDE_MAXDEVICE        1       /* max. 1 drive per IDE bus     */
 328
 329 #define CONFIG_SYS_ATA_IDE0_OFFSET      0x0000
 330
 331 #define CONFIG_SYS_ATA_BASE_ADDR        CONFIG_SYS_PCMCIA_MEM_ADDR
 332
 333 /* Offset for data I/O                  */
 334 #define CONFIG_SYS_ATA_DATA_OFFSET      (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 335
 336 /* Offset for normal register accesses  */
 337 #define CONFIG_SYS_ATA_REG_OFFSET       (2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 338
 339 /* Offset for alternate registers       */
 340 #define CONFIG_SYS_ATA_ALT_OFFSET       0x0100
 341
 342 /*-----------------------------------------------------------------------
 343  *
 344  *-----------------------------------------------------------------------
 345  *
 346  */
 347 #define CONFIG_SYS_DER  0
 348
 349 /*
 350  * Init Memory Controller:
 351  *
 352  * BR0/1 and OR0/1 (FLASH)
 353  */
 354
 355 #define FLASH_BASE0_PRELIM      0x40000000      /* FLASH bank #0        */
 356 #define FLASH_BASE1_PRELIM      0x60000000      /* FLASH bank #0        */
 357
 358 /* used to re-map FLASH both when starting from SRAM or FLASH:
 359  * restrict access enough to keep SRAM working (if any)
 360  * but not too much to meddle with FLASH accesses
 361  */
 362 #define CONFIG_SYS_REMAP_OR_AM          0x80000000      /* OR addr mask */
 363 #define CONFIG_SYS_PRELIM_OR_AM 0xE0000000      /* OR addr mask */
 364
 365 /*
 366  * FLASH timing:
 367  */
 368 #define CONFIG_SYS_OR_TIMING_FLASH      (OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
 369                                  OR_SCY_3_CLK | OR_EHTR | OR_BI)
 370
 371 #define CONFIG_SYS_OR0_REMAP    (CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
 372 #define CONFIG_SYS_OR0_PRELIM   (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
 373 #define CONFIG_SYS_BR0_PRELIM   ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
 374
 375 #define CONFIG_SYS_OR1_REMAP    CONFIG_SYS_OR0_REMAP
 376 #define CONFIG_SYS_OR1_PRELIM   CONFIG_SYS_OR0_PRELIM
 377 #define CONFIG_SYS_BR1_PRELIM   ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
 378
 379 /*
 380  * BR2/3 and OR2/3 (SDRAM)
 381  *
 382  */
 383 #define SDRAM_BASE2_PRELIM      0x00000000      /* SDRAM bank #0        */
 384 #define SDRAM_BASE3_PRELIM      0x20000000      /* SDRAM bank #1        */
 385 #define SDRAM_MAX_SIZE          0x04000000      /* max 64 MB per bank   */
 386
 387 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)      */
 388 #define CONFIG_SYS_OR_TIMING_SDRAM      0x00000A00
 389
 390 #define CONFIG_SYS_OR2_PRELIM   (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM )
 391 #define CONFIG_SYS_BR2_PRELIM   ((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 392
 393 #ifndef CONFIG_CAN_DRIVER
 394 #define CONFIG_SYS_OR3_PRELIM   CONFIG_SYS_OR2_PRELIM
 395 #define CONFIG_SYS_BR3_PRELIM   ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 396 #else   /* CAN uses CS3#, so we can have only one SDRAM bank anyway */
 397 #define CONFIG_SYS_CAN_BASE             0xC0000000      /* CAN mapped at 0xC0000000     */
 398 #define CONFIG_SYS_CAN_OR_AM            0xFFFF8000      /* 32 kB address mask           */
 399 #define CONFIG_SYS_OR3_CAN              (CONFIG_SYS_CAN_OR_AM | OR_G5LA | OR_BI)
 400 #define CONFIG_SYS_BR3_CAN              ((CONFIG_SYS_CAN_BASE & BR_BA_MSK) | \
 401                                         BR_PS_8 | BR_MS_UPMB | BR_V )
 402 #endif  /* CONFIG_CAN_DRIVER */
 403
 404 /*
 405  * Memory Periodic Timer Prescaler
 406  *
 407  * The Divider for PTA (refresh timer) configuration is based on an
 408  * example SDRAM configuration (64 MBit, one bank). The adjustment to
 409  * the number of chip selects (NCS) and the actually needed refresh
 410  * rate is done by setting MPTPR.
 411  *
 412  * PTA is calculated from
 413  *      PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS)
 414  *
 415  *      gclk      CPU clock (not bus clock!)
 416  *      Trefresh  Refresh cycle * 4 (four word bursts used)
 417  *
 418  * 4096  Rows from SDRAM example configuration
 419  * 1000  factor s -> ms
 420  *   32  PTP (pre-divider from MPTPR) from SDRAM example configuration
 421  *    4  Number of refresh cycles per period
 422  *   64  Refresh cycle in ms per number of rows
 423  * --------------------------------------------
 424  * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000
 425  *
 426  * 50 MHz => 50.000.000 / Divider =  98
 427  * 66 Mhz => 66.000.000 / Divider = 129
 428  * 80 Mhz => 80.000.000 / Divider = 156
 429  */
 430
 431 #define CONFIG_SYS_PTA_PER_CLK  ((4096 * 32 * 1000) / (4 * 64))
 432 #define CONFIG_SYS_MAMR_PTA     98
 433
 434 /*
 435  * For 16 MBit, refresh rates could be 31.3 us
 436  * (= 64 ms / 2K = 125 / quad bursts).
 437  * For a simpler initialization, 15.6 us is used instead.
 438  *
 439  * #define CONFIG_SYS_MPTPR_2BK_2K      MPTPR_PTP_DIV32         for 2 banks
 440  * #define CONFIG_SYS_MPTPR_1BK_2K      MPTPR_PTP_DIV64         for 1 bank
 441  */
 442 #define CONFIG_SYS_MPTPR_2BK_4K MPTPR_PTP_DIV16         /* setting for 2 banks  */
 443 #define CONFIG_SYS_MPTPR_1BK_4K MPTPR_PTP_DIV32         /* setting for 1 bank   */
 444
 445 /* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit         */
 446 #define CONFIG_SYS_MPTPR_2BK_8K MPTPR_PTP_DIV8          /* setting for 2 banks  */
 447 #define CONFIG_SYS_MPTPR_1BK_8K MPTPR_PTP_DIV16         /* setting for 1 bank   */
 448
 449 /*
 450  * MAMR settings for SDRAM
 451  */
 452
 453 /* 8 column SDRAM */
 454 #define CONFIG_SYS_MAMR_8COL    ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE       |   \
 455                          MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |   \
 456                          MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 457 /* 9 column SDRAM */
 458 #define CONFIG_SYS_MAMR_9COL    ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE       |   \
 459                          MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |   \
 460                          MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 461
 462 /* pass open firmware flat tree */
 463 #define CONFIG_OF_LIBFDT        1
 464 #define CONFIG_OF_BOARD_SETUP   1
 465 #define CONFIG_HWCONFIG         1
 466
 467 #endif  /* __CONFIG_H */