include/configs/TQM823M.h

   1 /*
   2  * (C) Copyright 2000-2008
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  *
   5  * See file CREDITS for list of people who contributed to this
   6  * project.
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of
  11  * the License, or (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21  * MA 02111-1307 USA
  22  */
  23
  24 /*
  25  * board/config.h - configuration options, board specific
  26  */
  27
  28 #ifndef __CONFIG_H
  29 #define __CONFIG_H
  30
  31 /*
  32  * High Level Configuration Options
  33  * (easy to change)
  34  */
  35
  36 #define CONFIG_MPC823           1       /* This is a MPC823 CPU         */
  37 #define CONFIG_TQM823M          1       /* ...on a TQM8xxM module       */
  38
  39 #ifdef  CONFIG_LCD                      /* with LCD controller ?        */
  40 /* #define CONFIG_NEC_NL6448BC20 1 / * use NEC NL6448BC20 display       */
  41 #endif
  42
  43 #define CONFIG_8xx_CONS_SMC1    1       /* Console is on SMC1           */
  44 #define CONFIG_SYS_SMC_RXBUFLEN 128
  45 #define CONFIG_SYS_MAXIDLE      10
  46 #define CONFIG_BAUDRATE         115200  /* console baudrate = 115kbps   */
  47
  48 #define CONFIG_BOOTCOUNT_LIMIT
  49
  50 #define CONFIG_BOOTDELAY        5       /* autoboot after 5 seconds     */
  51
  52 #define CONFIG_BOARD_TYPES      1       /* support board types          */
  53
  54 #define CONFIG_PREBOOT  "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo"
  55
  56 #undef  CONFIG_BOOTARGS
  57
  58 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
  59         "netdev=eth0\0"                                                 \
  60         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
  61                 "nfsroot=${serverip}:${rootpath}\0"                     \
  62         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
  63         "addip=setenv bootargs ${bootargs} "                            \
  64                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
  65                 ":${hostname}:${netdev}:off panic=1\0"                  \
  66         "flash_nfs=run nfsargs addip;"                                  \
  67                 "bootm ${kernel_addr}\0"                                \
  68         "flash_self=run ramargs addip;"                                 \
  69                 "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
  70         "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"     \
  71         "rootpath=/opt/eldk/ppc_8xx\0"                                  \
  72         "hostname=TQM823M\0"                                            \
  73         "bootfile=TQM823M/uImage\0"                                     \
  74         "fdt_addr=40080000\0"                                           \
  75         "kernel_addr=400A0000\0"                                        \
  76         "ramdisk_addr=40280000\0"                                       \
  77         "u-boot=TQM823M/u-image.bin\0"                                  \
  78         "load=tftp 200000 ${u-boot}\0"                                  \
  79         "update=prot off 40000000 +${filesize};"                        \
  80                 "era 40000000 +${filesize};"                            \
  81                 "cp.b 200000 40000000 ${filesize};"                     \
  82                 "sete filesize;save\0"                                  \
  83         ""
  84 #define CONFIG_BOOTCOMMAND      "run flash_self"
  85
  86 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download  */
  87 #undef  CONFIG_SYS_LOADS_BAUD_CHANGE            /* don't allow baudrate change  */
  88
  89 #undef  CONFIG_WATCHDOG                 /* watchdog disabled            */
  90
  91 #ifdef CONFIG_LCD
  92 # undef  CONFIG_STATUS_LED              /* disturbs display             */
  93 #else
  94 # define CONFIG_STATUS_LED      1       /* Status LED enabled           */
  95 #endif  /* CONFIG_LCD */
  96
  97 #undef  CONFIG_CAN_DRIVER               /* CAN Driver support disabled  */
  98
  99 /*
 100  * BOOTP options
 101  */
 102 #define CONFIG_BOOTP_SUBNETMASK
 103 #define CONFIG_BOOTP_GATEWAY
 104 #define CONFIG_BOOTP_HOSTNAME
 105 #define CONFIG_BOOTP_BOOTPATH
 106 #define CONFIG_BOOTP_BOOTFILESIZE
 107
 108
 109 #define CONFIG_MAC_PARTITION
 110 #define CONFIG_DOS_PARTITION
 111
 112 #define CONFIG_RTC_MPC8xx               /* use internal RTC of MPC8xx   */
 113
 114
 115 /*
 116  * Command line configuration.
 117  */
 118 #include <config_cmd_default.h>
 119
 120 #define CONFIG_CMD_ASKENV
 121 #define CONFIG_CMD_DATE
 122 #define CONFIG_CMD_DHCP
 123 #define CONFIG_CMD_ELF
 124 #define CONFIG_CMD_EXT2
 125 #define CONFIG_CMD_IDE
 126 #define CONFIG_CMD_JFFS2
 127 #define CONFIG_CMD_NFS
 128 #define CONFIG_CMD_SNTP
 129
 130
 131 #define CONFIG_NETCONSOLE
 132
 133
 134 /*
 135  * Miscellaneous configurable options
 136  */
 137 #define CONFIG_SYS_LONGHELP                     /* undef to save memory         */
 138 #define CONFIG_SYS_PROMPT               "=> "   /* Monitor Command Prompt       */
 139
 140 #define CONFIG_CMDLINE_EDITING  1       /* add command line history     */
 141 #define CONFIG_SYS_HUSH_PARSER          1       /* Use the HUSH parser          */
 142 #ifdef  CONFIG_SYS_HUSH_PARSER
 143 #define CONFIG_SYS_PROMPT_HUSH_PS2      "> "
 144 #endif
 145
 146 #if defined(CONFIG_CMD_KGDB)
 147 #define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size      */
 148 #else
 149 #define CONFIG_SYS_CBSIZE               256     /* Console I/O Buffer Size      */
 150 #endif
 151 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 152 #define CONFIG_SYS_MAXARGS              16      /* max number of command args   */
 153 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size    */
 154
 155 #define CONFIG_SYS_MEMTEST_START        0x0400000       /* memtest works on     */
 156 #define CONFIG_SYS_MEMTEST_END          0x0C00000       /* 4 ... 12 MB in DRAM  */
 157
 158 #define CONFIG_SYS_LOAD_ADDR            0x100000        /* default load address */
 159
 160 #define CONFIG_SYS_HZ                   1000    /* decrementer freq: 1 ms ticks */
 161
 162 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, 115200 }
 163
 164 /*
 165  * Low Level Configuration Settings
 166  * (address mappings, register initial values, etc.)
 167  * You should know what you are doing if you make changes here.
 168  */
 169 /*-----------------------------------------------------------------------
 170  * Internal Memory Mapped Register
 171  */
 172 #define CONFIG_SYS_IMMR         0xFFF00000
 173
 174 /*-----------------------------------------------------------------------
 175  * Definitions for initial stack pointer and data area (in DPRAM)
 176  */
 177 #define CONFIG_SYS_INIT_RAM_ADDR        CONFIG_SYS_IMMR
 178 #define CONFIG_SYS_INIT_RAM_END 0x2F00  /* End of used area in DPRAM    */
 179 #define CONFIG_SYS_GBL_DATA_SIZE        64  /* size in bytes reserved for initial data */
 180 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 181 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 182
 183 /*-----------------------------------------------------------------------
 184  * Start addresses for the final memory configuration
 185  * (Set up by the startup code)
 186  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 187  */
 188 #define CONFIG_SYS_SDRAM_BASE           0x00000000
 189 #define CONFIG_SYS_FLASH_BASE           0x40000000
 190 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 256 kB for Monitor   */
 191 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
 192 #define CONFIG_SYS_MALLOC_LEN           (128 << 10)     /* Reserve 128 kB for malloc()  */
 193
 194 /*
 195  * For booting Linux, the board info and command line data
 196  * have to be in the first 8 MB of memory, since this is
 197  * the maximum mapped by the Linux kernel during initialization.
 198  */
 199 #define CONFIG_SYS_BOOTMAPSZ            (8 << 20)       /* Initial Memory map for Linux */
 200
 201 /*-----------------------------------------------------------------------
 202  * FLASH organization
 203  */
 204
 205 /* use CFI flash driver */
 206 #define CONFIG_SYS_FLASH_CFI            1       /* Flash is CFI conformant */
 207 #define CONFIG_FLASH_CFI_DRIVER 1       /* Use the common driver */
 208 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE }
 209 #define CONFIG_SYS_FLASH_EMPTY_INFO
 210 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE       1
 211 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* max number of memory banks */
 212 #define CONFIG_SYS_MAX_FLASH_SECT       256     /* max number of sectors on one chip */
 213
 214 #define CONFIG_ENV_IS_IN_FLASH  1
 215 #define CONFIG_ENV_OFFSET               0x40000 /*   Offset   of Environment Sector     */
 216 #define CONFIG_ENV_SIZE         0x08000 /* Total Size of Environment            */
 217 #define CONFIG_ENV_SECT_SIZE    0x20000 /* Total Size of Environment Sector     */
 218
 219 /* Address and size of Redundant Environment Sector     */
 220 #define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET+CONFIG_ENV_SECT_SIZE)
 221 #define CONFIG_ENV_SIZE_REDUND  (CONFIG_ENV_SIZE)
 222
 223 #define CONFIG_SYS_USE_PPCENV                   /* Environment embedded in sect .ppcenv */
 224
 225 #define CONFIG_MISC_INIT_R              /* Make sure to remap flashes correctly */
 226
 227 /*-----------------------------------------------------------------------
 228  * Dynamic MTD partition support
 229  */
 230 #define CONFIG_CMD_MTDPARTS
 231 #define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */
 232 #define CONFIG_FLASH_CFI_MTD
 233 #define MTDIDS_DEFAULT          "nor0=TQM8xxM-0"
 234
 235 #define MTDPARTS_DEFAULT        "mtdparts=TQM8xxM-0:512k(u-boot),"      \
 236                                                 "128k(dtb),"            \
 237                                                 "1920k(kernel),"        \
 238                                                 "5632(rootfs),"         \
 239                                                 "4m(data)"
 240
 241 /*-----------------------------------------------------------------------
 242  * Hardware Information Block
 243  */
 244 #define CONFIG_SYS_HWINFO_OFFSET        0x0003FFC0      /* offset of HW Info block */
 245 #define CONFIG_SYS_HWINFO_SIZE          0x00000040      /* size   of HW Info block */
 246 #define CONFIG_SYS_HWINFO_MAGIC 0x54514D38      /* 'TQM8' */
 247
 248 /*-----------------------------------------------------------------------
 249  * Cache Configuration
 250  */
 251 #define CONFIG_SYS_CACHELINE_SIZE       16      /* For all MPC8xx CPUs                  */
 252 #if defined(CONFIG_CMD_KGDB)
 253 #define CONFIG_SYS_CACHELINE_SHIFT      4       /* log base 2 of the above value        */
 254 #endif
 255
 256 /*-----------------------------------------------------------------------
 257  * SYPCR - System Protection Control                            11-9
 258  * SYPCR can only be written once after reset!
 259  *-----------------------------------------------------------------------
 260  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
 261  */
 262 #if defined(CONFIG_WATCHDOG)
 263 #define CONFIG_SYS_SYPCR        (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 264                          SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 265 #else
 266 #define CONFIG_SYS_SYPCR        (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 267 #endif
 268
 269 /*-----------------------------------------------------------------------
 270  * SIUMCR - SIU Module Configuration                            11-6
 271  *-----------------------------------------------------------------------
 272  * PCMCIA config., multi-function pin tri-state
 273  */
 274 #ifndef CONFIG_CAN_DRIVER
 275 #define CONFIG_SYS_SIUMCR       (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 276 #else   /* we must activate GPL5 in the SIUMCR for CAN */
 277 #define CONFIG_SYS_SIUMCR       (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 278 #endif  /* CONFIG_CAN_DRIVER */
 279
 280 /*-----------------------------------------------------------------------
 281  * TBSCR - Time Base Status and Control                         11-26
 282  *-----------------------------------------------------------------------
 283  * Clear Reference Interrupt Status, Timebase freezing enabled
 284  */
 285 #define CONFIG_SYS_TBSCR        (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 286
 287 /*-----------------------------------------------------------------------
 288  * RTCSC - Real-Time Clock Status and Control Register          11-27
 289  *-----------------------------------------------------------------------
 290  */
 291 #define CONFIG_SYS_RTCSC        (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
 292
 293 /*-----------------------------------------------------------------------
 294  * PISCR - Periodic Interrupt Status and Control                11-31
 295  *-----------------------------------------------------------------------
 296  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
 297  */
 298 #define CONFIG_SYS_PISCR        (PISCR_PS | PISCR_PITF)
 299
 300 /*-----------------------------------------------------------------------
 301  * PLPRCR - PLL, Low-Power, and Reset Control Register          15-30
 302  *-----------------------------------------------------------------------
 303  * Reset PLL lock status sticky bit, timer expired status bit and timer
 304  * interrupt status bit
 305  */
 306 #define CONFIG_SYS_PLPRCR       (PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
 307
 308 /*-----------------------------------------------------------------------
 309  * SCCR - System Clock and reset Control Register               15-27
 310  *-----------------------------------------------------------------------
 311  * Set clock output, timebase and RTC source and divider,
 312  * power management and some other internal clocks
 313  */
 314 #define SCCR_MASK       SCCR_EBDF11
 315 #define CONFIG_SYS_SCCR (SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 316                          SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 317                          SCCR_DFALCD00)
 318
 319 /*-----------------------------------------------------------------------
 320  * PCMCIA stuff
 321  *-----------------------------------------------------------------------
 322  *
 323  */
 324 #define CONFIG_SYS_PCMCIA_MEM_ADDR      (0xE0000000)
 325 #define CONFIG_SYS_PCMCIA_MEM_SIZE      ( 64 << 20 )
 326 #define CONFIG_SYS_PCMCIA_DMA_ADDR      (0xE4000000)
 327 #define CONFIG_SYS_PCMCIA_DMA_SIZE      ( 64 << 20 )
 328 #define CONFIG_SYS_PCMCIA_ATTRB_ADDR    (0xE8000000)
 329 #define CONFIG_SYS_PCMCIA_ATTRB_SIZE    ( 64 << 20 )
 330 #define CONFIG_SYS_PCMCIA_IO_ADDR       (0xEC000000)
 331 #define CONFIG_SYS_PCMCIA_IO_SIZE       ( 64 << 20 )
 332
 333 /*-----------------------------------------------------------------------
 334  * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
 335  *-----------------------------------------------------------------------
 336  */
 337
 338 #define CONFIG_IDE_8xx_PCCARD   1       /* Use IDE with PC Card Adapter */
 339
 340 #undef  CONFIG_IDE_8xx_DIRECT           /* Direct IDE    not supported  */
 341 #undef  CONFIG_IDE_LED                  /* LED   for ide not supported  */
 342 #undef  CONFIG_IDE_RESET                /* reset for ide not supported  */
 343
 344 #define CONFIG_SYS_IDE_MAXBUS           1       /* max. 1 IDE bus               */
 345 #define CONFIG_SYS_IDE_MAXDEVICE        1       /* max. 1 drive per IDE bus     */
 346
 347 #define CONFIG_SYS_ATA_IDE0_OFFSET      0x0000
 348
 349 #define CONFIG_SYS_ATA_BASE_ADDR        CONFIG_SYS_PCMCIA_MEM_ADDR
 350
 351 /* Offset for data I/O                  */
 352 #define CONFIG_SYS_ATA_DATA_OFFSET      (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 353
 354 /* Offset for normal register accesses  */
 355 #define CONFIG_SYS_ATA_REG_OFFSET       (2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 356
 357 /* Offset for alternate registers       */
 358 #define CONFIG_SYS_ATA_ALT_OFFSET       0x0100
 359
 360 /*-----------------------------------------------------------------------
 361  *
 362  *-----------------------------------------------------------------------
 363  *
 364  */
 365 #define CONFIG_SYS_DER  0
 366
 367 /*
 368  * Init Memory Controller:
 369  *
 370  * BR0/1 and OR0/1 (FLASH)
 371  */
 372
 373 #define FLASH_BASE0_PRELIM      0x40000000      /* FLASH bank #0        */
 374 #define FLASH_BASE1_PRELIM      0x60000000      /* FLASH bank #0        */
 375
 376 /* used to re-map FLASH both when starting from SRAM or FLASH:
 377  * restrict access enough to keep SRAM working (if any)
 378  * but not too much to meddle with FLASH accesses
 379  */
 380 #define CONFIG_SYS_REMAP_OR_AM          0x80000000      /* OR addr mask */
 381 #define CONFIG_SYS_PRELIM_OR_AM 0xE0000000      /* OR addr mask */
 382
 383 /*
 384  * FLASH timing:
 385  */
 386 #define CONFIG_SYS_OR_TIMING_FLASH      (OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
 387                                  OR_SCY_3_CLK | OR_EHTR | OR_BI)
 388
 389 #define CONFIG_SYS_OR0_REMAP    (CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
 390 #define CONFIG_SYS_OR0_PRELIM   (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
 391 #define CONFIG_SYS_BR0_PRELIM   ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
 392
 393 #define CONFIG_SYS_OR1_REMAP    CONFIG_SYS_OR0_REMAP
 394 #define CONFIG_SYS_OR1_PRELIM   CONFIG_SYS_OR0_PRELIM
 395 #define CONFIG_SYS_BR1_PRELIM   ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
 396
 397 /*
 398  * BR2/3 and OR2/3 (SDRAM)
 399  *
 400  */
 401 #define SDRAM_BASE2_PRELIM      0x00000000      /* SDRAM bank #0        */
 402 #define SDRAM_BASE3_PRELIM      0x20000000      /* SDRAM bank #1        */
 403 #define SDRAM_MAX_SIZE          0x04000000      /* max 64 MB per bank   */
 404
 405 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)      */
 406 #define CONFIG_SYS_OR_TIMING_SDRAM      0x00000A00
 407
 408 #define CONFIG_SYS_OR2_PRELIM   (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM )
 409 #define CONFIG_SYS_BR2_PRELIM   ((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 410
 411 #ifndef CONFIG_CAN_DRIVER
 412 #define CONFIG_SYS_OR3_PRELIM   CONFIG_SYS_OR2_PRELIM
 413 #define CONFIG_SYS_BR3_PRELIM   ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 414 #else   /* CAN uses CS3#, so we can have only one SDRAM bank anyway */
 415 #define CONFIG_SYS_CAN_BASE             0xC0000000      /* CAN mapped at 0xC0000000     */
 416 #define CONFIG_SYS_CAN_OR_AM            0xFFFF8000      /* 32 kB address mask           */
 417 #define CONFIG_SYS_OR3_CAN              (CONFIG_SYS_CAN_OR_AM | OR_G5LA | OR_BI)
 418 #define CONFIG_SYS_BR3_CAN              ((CONFIG_SYS_CAN_BASE & BR_BA_MSK) | \
 419                                         BR_PS_8 | BR_MS_UPMB | BR_V )
 420 #endif  /* CONFIG_CAN_DRIVER */
 421
 422 /*
 423  * Memory Periodic Timer Prescaler
 424  *
 425  * The Divider for PTA (refresh timer) configuration is based on an
 426  * example SDRAM configuration (64 MBit, one bank). The adjustment to
 427  * the number of chip selects (NCS) and the actually needed refresh
 428  * rate is done by setting MPTPR.
 429  *
 430  * PTA is calculated from
 431  *      PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS)
 432  *
 433  *      gclk      CPU clock (not bus clock!)
 434  *      Trefresh  Refresh cycle * 4 (four word bursts used)
 435  *
 436  * 4096  Rows from SDRAM example configuration
 437  * 1000  factor s -> ms
 438  *   32  PTP (pre-divider from MPTPR) from SDRAM example configuration
 439  *    4  Number of refresh cycles per period
 440  *   64  Refresh cycle in ms per number of rows
 441  * --------------------------------------------
 442  * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000
 443  *
 444  * 50 MHz => 50.000.000 / Divider =  98
 445  * 66 Mhz => 66.000.000 / Divider = 129
 446  * 80 Mhz => 80.000.000 / Divider = 156
 447  */
 448
 449 #define CONFIG_SYS_PTA_PER_CLK  ((4096 * 32 * 1000) / (4 * 64))
 450 #define CONFIG_SYS_MAMR_PTA     98
 451
 452 /*
 453  * For 16 MBit, refresh rates could be 31.3 us
 454  * (= 64 ms / 2K = 125 / quad bursts).
 455  * For a simpler initialization, 15.6 us is used instead.
 456  *
 457  * #define CONFIG_SYS_MPTPR_2BK_2K      MPTPR_PTP_DIV32         for 2 banks
 458  * #define CONFIG_SYS_MPTPR_1BK_2K      MPTPR_PTP_DIV64         for 1 bank
 459  */
 460 #define CONFIG_SYS_MPTPR_2BK_4K MPTPR_PTP_DIV16         /* setting for 2 banks  */
 461 #define CONFIG_SYS_MPTPR_1BK_4K MPTPR_PTP_DIV32         /* setting for 1 bank   */
 462
 463 /* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit         */
 464 #define CONFIG_SYS_MPTPR_2BK_8K MPTPR_PTP_DIV8          /* setting for 2 banks  */
 465 #define CONFIG_SYS_MPTPR_1BK_8K MPTPR_PTP_DIV16         /* setting for 1 bank   */
 466
 467 /*
 468  * MAMR settings for SDRAM
 469  */
 470
 471 /* 8 column SDRAM */
 472 #define CONFIG_SYS_MAMR_8COL    ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE       |   \
 473                          MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |   \
 474                          MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 475 /* 9 column SDRAM */
 476 #define CONFIG_SYS_MAMR_9COL    ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE       |   \
 477                          MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |   \
 478                          MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 479
 480
 481 /*
 482  * Internal Definitions
 483  *
 484  * Boot Flags
 485  */
 486 #define BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
 487 #define BOOTFLAG_WARM   0x02            /* Software reboot                      */
 488
 489 #endif  /* __CONFIG_H */