include/configs/TQM850L.h

   1 /*
   2  * (C) Copyright 2000-2008
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  *
   5  * See file CREDITS for list of people who contributed to this
   6  * project.
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of
  11  * the License, or (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21  * MA 02111-1307 USA
  22  */
  23
  24 /*
  25  * board/config.h - configuration options, board specific
  26  */
  27
  28 #ifndef __CONFIG_H
  29 #define __CONFIG_H
  30
  31 /*
  32  * High Level Configuration Options
  33  * (easy to change)
  34  */
  35
  36 #define CONFIG_MPC850           1       /* This is a MPC850 CPU         */
  37 #define CONFIG_TQM850L          1       /* ...on a TQM8xxL module       */
  38
  39 #define CONFIG_8xx_CONS_SMC1    1       /* Console is on SMC1           */
  40 #undef  CONFIG_8xx_CONS_SMC2
  41 #undef  CONFIG_8xx_CONS_NONE
  42 #define CONFIG_BAUDRATE         115200  /* console baudrate = 115kbps   */
  43
  44 #define CONFIG_BOOTCOUNT_LIMIT
  45
  46 #define CONFIG_BOOTDELAY        5       /* autoboot after 5 seconds     */
  47
  48 #define CONFIG_BOARD_TYPES      1       /* support board types          */
  49
  50 #define CONFIG_PREBOOT  "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo"
  51
  52 #undef  CONFIG_BOOTARGS
  53
  54 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
  55         "netdev=eth0\0"                                                 \
  56         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
  57                 "nfsroot=${serverip}:${rootpath}\0"                     \
  58         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
  59         "addip=setenv bootargs ${bootargs} "                            \
  60                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
  61                 ":${hostname}:${netdev}:off panic=1\0"                  \
  62         "flash_nfs=run nfsargs addip;"                                  \
  63                 "bootm ${kernel_addr}\0"                                \
  64         "flash_self=run ramargs addip;"                                 \
  65                 "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
  66         "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"     \
  67         "rootpath=/opt/eldk/ppc_8xx\0"                                  \
  68         "hostname=TQM850L\0"                                            \
  69         "bootfile=TQM850L/uImage\0"                                     \
  70         "fdt_addr=40040000\0"                                           \
  71         "kernel_addr=40060000\0"                                        \
  72         "ramdisk_addr=40200000\0"                                       \
  73         "u-boot=TQM850L/u-image.bin\0"                                  \
  74         "load=tftp 200000 ${u-boot}\0"                                  \
  75         "update=prot off 40000000 +${filesize};"                        \
  76                 "era 40000000 +${filesize};"                            \
  77                 "cp.b 200000 40000000 ${filesize};"                     \
  78                 "sete filesize;save\0"                                  \
  79         ""
  80 #define CONFIG_BOOTCOMMAND      "run flash_self"
  81
  82 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download  */
  83 #undef  CFG_LOADS_BAUD_CHANGE           /* don't allow baudrate change  */
  84
  85 #undef  CONFIG_WATCHDOG                 /* watchdog disabled            */
  86
  87 #define CONFIG_STATUS_LED       1       /* Status LED enabled           */
  88
  89 #undef  CONFIG_CAN_DRIVER               /* CAN Driver support disabled  */
  90
  91 /*
  92  * BOOTP options
  93  */
  94 #define CONFIG_BOOTP_SUBNETMASK
  95 #define CONFIG_BOOTP_GATEWAY
  96 #define CONFIG_BOOTP_HOSTNAME
  97 #define CONFIG_BOOTP_BOOTPATH
  98 #define CONFIG_BOOTP_BOOTFILESIZE
  99
 100
 101 #define CONFIG_MAC_PARTITION
 102 #define CONFIG_DOS_PARTITION
 103
 104 #define CONFIG_RTC_MPC8xx               /* use internal RTC of MPC8xx   */
 105
 106 /*
 107  * Command line configuration.
 108  */
 109 #include <config_cmd_default.h>
 110
 111 #define CONFIG_CMD_ASKENV
 112 #define CONFIG_CMD_DATE
 113 #define CONFIG_CMD_DHCP
 114 #define CONFIG_CMD_ELF
 115 #define CONFIG_CMD_IDE
 116 #define CONFIG_CMD_JFFS2
 117 #define CONFIG_CMD_NFS
 118 #define CONFIG_CMD_SNTP
 119
 120
 121 #define CONFIG_NETCONSOLE
 122
 123 /*
 124  * Miscellaneous configurable options
 125  */
 126 #define CFG_LONGHELP                    /* undef to save memory         */
 127 #define CFG_PROMPT              "=> "   /* Monitor Command Prompt       */
 128
 129 #define CONFIG_CMDLINE_EDITING  1       /* add command line history     */
 130 #define CFG_HUSH_PARSER         1       /* Use the HUSH parser          */
 131 #ifdef  CFG_HUSH_PARSER
 132 #define CFG_PROMPT_HUSH_PS2     "> "
 133 #endif
 134
 135 #if defined(CONFIG_CMD_KGDB)
 136 #define CFG_CBSIZE              1024    /* Console I/O Buffer Size      */
 137 #else
 138 #define CFG_CBSIZE              256     /* Console I/O Buffer Size      */
 139 #endif
 140 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
 141 #define CFG_MAXARGS             16      /* max number of command args   */
 142 #define CFG_BARGSIZE    CFG_CBSIZE      /* Boot Argument Buffer Size    */
 143
 144 #define CFG_MEMTEST_START       0x0400000       /* memtest works on     */
 145 #define CFG_MEMTEST_END         0x0C00000       /* 4 ... 12 MB in DRAM  */
 146
 147 #define CFG_LOAD_ADDR           0x100000        /* default load address */
 148
 149 #define CFG_HZ                  1000    /* decrementer freq: 1 ms ticks */
 150
 151 #define CFG_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
 152
 153 /*
 154  * Low Level Configuration Settings
 155  * (address mappings, register initial values, etc.)
 156  * You should know what you are doing if you make changes here.
 157  */
 158 /*-----------------------------------------------------------------------
 159  * Internal Memory Mapped Register
 160  */
 161 #define CFG_IMMR                0xFFF00000
 162
 163 /*-----------------------------------------------------------------------
 164  * Definitions for initial stack pointer and data area (in DPRAM)
 165  */
 166 #define CFG_INIT_RAM_ADDR       CFG_IMMR
 167 #define CFG_INIT_RAM_END        0x2F00  /* End of used area in DPRAM    */
 168 #define CFG_GBL_DATA_SIZE       64  /* size in bytes reserved for initial data */
 169 #define CFG_GBL_DATA_OFFSET     (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 170 #define CFG_INIT_SP_OFFSET      CFG_GBL_DATA_OFFSET
 171
 172 /*-----------------------------------------------------------------------
 173  * Start addresses for the final memory configuration
 174  * (Set up by the startup code)
 175  * Please note that CFG_SDRAM_BASE _must_ start at 0
 176  */
 177 #define CFG_SDRAM_BASE          0x00000000
 178 #define CFG_FLASH_BASE          0x40000000
 179 #define CFG_MONITOR_LEN         (256 << 10)     /* Reserve 256 kB for Monitor   */
 180 #define CFG_MONITOR_BASE        CFG_FLASH_BASE
 181 #define CFG_MALLOC_LEN          (128 << 10)     /* Reserve 128 kB for malloc()  */
 182
 183 /*
 184  * For booting Linux, the board info and command line data
 185  * have to be in the first 8 MB of memory, since this is
 186  * the maximum mapped by the Linux kernel during initialization.
 187  */
 188 #define CFG_BOOTMAPSZ           (8 << 20)       /* Initial Memory map for Linux */
 189
 190 /*-----------------------------------------------------------------------
 191  * FLASH organization
 192  */
 193
 194 /* use CFI flash driver */
 195 #define CFG_FLASH_CFI           1       /* Flash is CFI conformant */
 196 #define CFG_FLASH_CFI_DRIVER    1       /* Use the common driver */
 197 #define CFG_FLASH_BANKS_LIST    { CFG_FLASH_BASE, CFG_FLASH_BASE+flash_info[0].size }
 198 #define CFG_FLASH_EMPTY_INFO
 199 #define CFG_FLASH_USE_BUFFER_WRITE      1
 200 #define CFG_MAX_FLASH_BANKS     2       /* max number of memory banks */
 201 #define CFG_MAX_FLASH_SECT      71      /* max number of sectors on one chip */
 202
 203 #define CFG_ENV_IS_IN_FLASH     1
 204 #define CFG_ENV_OFFSET          0x8000  /*   Offset   of Environment Sector     */
 205 #define CFG_ENV_SIZE            0x4000  /* Total Size of Environment Sector     */
 206
 207 /* Address and size of Redundant Environment Sector     */
 208 #define CFG_ENV_OFFSET_REDUND   (CFG_ENV_OFFSET+CFG_ENV_SIZE)
 209 #define CFG_ENV_SIZE_REDUND     (CFG_ENV_SIZE)
 210
 211 #define CFG_USE_PPCENV                  /* Environment embedded in sect .ppcenv */
 212
 213 /*-----------------------------------------------------------------------
 214  * Dynamic MTD partition support
 215  */
 216 #define CONFIG_JFFS2_CMDLINE
 217 #define MTDIDS_DEFAULT          "nor0=TQM8xxL-0"
 218
 219 #define MTDPARTS_DEFAULT        "mtdparts=TQM8xxL-0:256k(u-boot),"      \
 220                                                 "128k(dtb),"            \
 221                                                 "1664k(kernel),"        \
 222                                                 "2m(rootfs),"           \
 223                                                 "4m(data)"
 224
 225 /*-----------------------------------------------------------------------
 226  * Hardware Information Block
 227  */
 228 #define CFG_HWINFO_OFFSET       0x0003FFC0      /* offset of HW Info block */
 229 #define CFG_HWINFO_SIZE         0x00000040      /* size   of HW Info block */
 230 #define CFG_HWINFO_MAGIC        0x54514D38      /* 'TQM8' */
 231
 232 /*-----------------------------------------------------------------------
 233  * Cache Configuration
 234  */
 235 #define CFG_CACHELINE_SIZE      16      /* For all MPC8xx CPUs                  */
 236 #if defined(CONFIG_CMD_KGDB)
 237 #define CFG_CACHELINE_SHIFT     4       /* log base 2 of the above value        */
 238 #endif
 239
 240 /*-----------------------------------------------------------------------
 241  * SYPCR - System Protection Control                            11-9
 242  * SYPCR can only be written once after reset!
 243  *-----------------------------------------------------------------------
 244  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
 245  */
 246 #if defined(CONFIG_WATCHDOG)
 247 #define CFG_SYPCR       (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 248                          SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 249 #else
 250 #define CFG_SYPCR       (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 251 #endif
 252
 253 /*-----------------------------------------------------------------------
 254  * SIUMCR - SIU Module Configuration                            11-6
 255  *-----------------------------------------------------------------------
 256  * PCMCIA config., multi-function pin tri-state
 257  */
 258 #ifndef CONFIG_CAN_DRIVER
 259 #define CFG_SIUMCR      (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 260 #else   /* we must activate GPL5 in the SIUMCR for CAN */
 261 #define CFG_SIUMCR      (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 262 #endif  /* CONFIG_CAN_DRIVER */
 263
 264 /*-----------------------------------------------------------------------
 265  * TBSCR - Time Base Status and Control                         11-26
 266  *-----------------------------------------------------------------------
 267  * Clear Reference Interrupt Status, Timebase freezing enabled
 268  */
 269 #define CFG_TBSCR       (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 270
 271 /*-----------------------------------------------------------------------
 272  * RTCSC - Real-Time Clock Status and Control Register          11-27
 273  *-----------------------------------------------------------------------
 274  */
 275 #define CFG_RTCSC       (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
 276
 277 /*-----------------------------------------------------------------------
 278  * PISCR - Periodic Interrupt Status and Control                11-31
 279  *-----------------------------------------------------------------------
 280  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
 281  */
 282 #define CFG_PISCR       (PISCR_PS | PISCR_PITF)
 283
 284 /*-----------------------------------------------------------------------
 285  * PLPRCR - PLL, Low-Power, and Reset Control Register          15-30
 286  *-----------------------------------------------------------------------
 287  * Reset PLL lock status sticky bit, timer expired status bit and timer
 288  * interrupt status bit
 289  */
 290 #define CFG_PLPRCR      (PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
 291
 292 /*-----------------------------------------------------------------------
 293  * SCCR - System Clock and reset Control Register               15-27
 294  *-----------------------------------------------------------------------
 295  * Set clock output, timebase and RTC source and divider,
 296  * power management and some other internal clocks
 297  */
 298 #define SCCR_MASK       SCCR_EBDF11
 299 #define CFG_SCCR        (SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 300                          SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 301                          SCCR_DFALCD00)
 302
 303 /*-----------------------------------------------------------------------
 304  * PCMCIA stuff
 305  *-----------------------------------------------------------------------
 306  *
 307  */
 308 #define CFG_PCMCIA_MEM_ADDR     (0xE0000000)
 309 #define CFG_PCMCIA_MEM_SIZE     ( 64 << 20 )
 310 #define CFG_PCMCIA_DMA_ADDR     (0xE4000000)
 311 #define CFG_PCMCIA_DMA_SIZE     ( 64 << 20 )
 312 #define CFG_PCMCIA_ATTRB_ADDR   (0xE8000000)
 313 #define CFG_PCMCIA_ATTRB_SIZE   ( 64 << 20 )
 314 #define CFG_PCMCIA_IO_ADDR      (0xEC000000)
 315 #define CFG_PCMCIA_IO_SIZE      ( 64 << 20 )
 316
 317 /*-----------------------------------------------------------------------
 318  * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
 319  *-----------------------------------------------------------------------
 320  */
 321
 322 #define CONFIG_IDE_8xx_PCCARD   1       /* Use IDE with PC Card Adapter */
 323
 324 #undef  CONFIG_IDE_8xx_DIRECT           /* Direct IDE    not supported  */
 325 #undef  CONFIG_IDE_LED                  /* LED   for ide not supported  */
 326 #undef  CONFIG_IDE_RESET                /* reset for ide not supported  */
 327
 328 #define CFG_IDE_MAXBUS          1       /* max. 1 IDE bus               */
 329 #define CFG_IDE_MAXDEVICE       1       /* max. 1 drive per IDE bus     */
 330
 331 #define CFG_ATA_IDE0_OFFSET     0x0000
 332
 333 #define CFG_ATA_BASE_ADDR       CFG_PCMCIA_MEM_ADDR
 334
 335 /* Offset for data I/O                  */
 336 #define CFG_ATA_DATA_OFFSET     (CFG_PCMCIA_MEM_SIZE + 0x320)
 337
 338 /* Offset for normal register accesses  */
 339 #define CFG_ATA_REG_OFFSET      (2 * CFG_PCMCIA_MEM_SIZE + 0x320)
 340
 341 /* Offset for alternate registers       */
 342 #define CFG_ATA_ALT_OFFSET      0x0100
 343
 344 /*-----------------------------------------------------------------------
 345  *
 346  *-----------------------------------------------------------------------
 347  *
 348  */
 349 #define CFG_DER 0
 350
 351 /*
 352  * Init Memory Controller:
 353  *
 354  * BR0/1 and OR0/1 (FLASH)
 355  */
 356
 357 #define FLASH_BASE0_PRELIM      0x40000000      /* FLASH bank #0        */
 358 #define FLASH_BASE1_PRELIM      0x60000000      /* FLASH bank #0        */
 359
 360 /* used to re-map FLASH both when starting from SRAM or FLASH:
 361  * restrict access enough to keep SRAM working (if any)
 362  * but not too much to meddle with FLASH accesses
 363  */
 364 #define CFG_REMAP_OR_AM         0x80000000      /* OR addr mask */
 365 #define CFG_PRELIM_OR_AM        0xE0000000      /* OR addr mask */
 366
 367 /*
 368  * FLASH timing:
 369  */
 370 #define CFG_OR_TIMING_FLASH     (OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
 371                                  OR_SCY_3_CLK | OR_EHTR | OR_BI)
 372
 373 #define CFG_OR0_REMAP   (CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
 374 #define CFG_OR0_PRELIM  (CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
 375 #define CFG_BR0_PRELIM  ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
 376
 377 #define CFG_OR1_REMAP   CFG_OR0_REMAP
 378 #define CFG_OR1_PRELIM  CFG_OR0_PRELIM
 379 #define CFG_BR1_PRELIM  ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
 380
 381 /*
 382  * BR2/3 and OR2/3 (SDRAM)
 383  *
 384  */
 385 #define SDRAM_BASE2_PRELIM      0x00000000      /* SDRAM bank #0        */
 386 #define SDRAM_BASE3_PRELIM      0x20000000      /* SDRAM bank #1        */
 387 #define SDRAM_MAX_SIZE          0x04000000      /* max 64 MB per bank   */
 388
 389 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)      */
 390 #define CFG_OR_TIMING_SDRAM     0x00000A00
 391
 392 #define CFG_OR2_PRELIM  (CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM )
 393 #define CFG_BR2_PRELIM  ((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 394
 395 #ifndef CONFIG_CAN_DRIVER
 396 #define CFG_OR3_PRELIM  CFG_OR2_PRELIM
 397 #define CFG_BR3_PRELIM  ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 398 #else   /* CAN uses CS3#, so we can have only one SDRAM bank anyway */
 399 #define CFG_CAN_BASE            0xC0000000      /* CAN mapped at 0xC0000000     */
 400 #define CFG_CAN_OR_AM           0xFFFF8000      /* 32 kB address mask           */
 401 #define CFG_OR3_CAN             (CFG_CAN_OR_AM | OR_G5LA | OR_BI)
 402 #define CFG_BR3_CAN             ((CFG_CAN_BASE & BR_BA_MSK) | \
 403                                         BR_PS_8 | BR_MS_UPMB | BR_V )
 404 #endif  /* CONFIG_CAN_DRIVER */
 405
 406 /*
 407  * Memory Periodic Timer Prescaler
 408  *
 409  * The Divider for PTA (refresh timer) configuration is based on an
 410  * example SDRAM configuration (64 MBit, one bank). The adjustment to
 411  * the number of chip selects (NCS) and the actually needed refresh
 412  * rate is done by setting MPTPR.
 413  *
 414  * PTA is calculated from
 415  *      PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS)
 416  *
 417  *      gclk      CPU clock (not bus clock!)
 418  *      Trefresh  Refresh cycle * 4 (four word bursts used)
 419  *
 420  * 4096  Rows from SDRAM example configuration
 421  * 1000  factor s -> ms
 422  *   32  PTP (pre-divider from MPTPR) from SDRAM example configuration
 423  *    4  Number of refresh cycles per period
 424  *   64  Refresh cycle in ms per number of rows
 425  * --------------------------------------------
 426  * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000
 427  *
 428  * 50 MHz => 50.000.000 / Divider =  98
 429  * 66 Mhz => 66.000.000 / Divider = 129
 430  * 80 Mhz => 80.000.000 / Divider = 156
 431  */
 432
 433 #define CFG_PTA_PER_CLK ((4096 * 32 * 1000) / (4 * 64))
 434 #define CFG_MAMR_PTA    98
 435
 436 /*
 437  * For 16 MBit, refresh rates could be 31.3 us
 438  * (= 64 ms / 2K = 125 / quad bursts).
 439  * For a simpler initialization, 15.6 us is used instead.
 440  *
 441  * #define CFG_MPTPR_2BK_2K     MPTPR_PTP_DIV32         for 2 banks
 442  * #define CFG_MPTPR_1BK_2K     MPTPR_PTP_DIV64         for 1 bank
 443  */
 444 #define CFG_MPTPR_2BK_4K        MPTPR_PTP_DIV16         /* setting for 2 banks  */
 445 #define CFG_MPTPR_1BK_4K        MPTPR_PTP_DIV32         /* setting for 1 bank   */
 446
 447 /* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit         */
 448 #define CFG_MPTPR_2BK_8K        MPTPR_PTP_DIV8          /* setting for 2 banks  */
 449 #define CFG_MPTPR_1BK_8K        MPTPR_PTP_DIV16         /* setting for 1 bank   */
 450
 451 /*
 452  * MAMR settings for SDRAM
 453  */
 454
 455 /* 8 column SDRAM */
 456 #define CFG_MAMR_8COL   ((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE      |   \
 457                          MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |   \
 458                          MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 459 /* 9 column SDRAM */
 460 #define CFG_MAMR_9COL   ((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE      |   \
 461                          MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |   \
 462                          MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 463
 464
 465 /*
 466  * Internal Definitions
 467  *
 468  * Boot Flags
 469  */
 470 #define BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
 471 #define BOOTFLAG_WARM   0x02            /* Software reboot                      */
 472
 473 #endif  /* __CONFIG_H */