include/configs/TQM855L.h

   1 /*
   2  * (C) Copyright 2000-2005
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  *
   5  * See file CREDITS for list of people who contributed to this
   6  * project.
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of
  11  * the License, or (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21  * MA 02111-1307 USA
  22  */
  23
  24 /*
  25  * board/config.h - configuration options, board specific
  26  */
  27
  28 #ifndef __CONFIG_H
  29 #define __CONFIG_H
  30
  31 /*
  32  * High Level Configuration Options
  33  * (easy to change)
  34  */
  35
  36 #define CONFIG_MPC855           1       /* This is a MPC855 CPU         */
  37 #define CONFIG_TQM855L          1       /* ...on a TQM8xxL module       */
  38
  39 #define CONFIG_8xx_CONS_SMC1    1       /* Console is on SMC1           */
  40 #undef  CONFIG_8xx_CONS_SMC2
  41 #undef  CONFIG_8xx_CONS_NONE
  42
  43 #define CONFIG_BAUDRATE         115200  /* console baudrate = 115kbps   */
  44
  45 #define CONFIG_BOOTCOUNT_LIMIT
  46
  47 #define CONFIG_BOOTDELAY        5       /* autoboot after 5 seconds     */
  48
  49 #define CONFIG_BOARD_TYPES      1       /* support board types          */
  50
  51 #define CONFIG_PREBOOT  "echo;" \
  52         "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
  53         "echo"
  54
  55 #undef  CONFIG_BOOTARGS
  56
  57 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
  58         "netdev=eth0\0"                                                 \
  59         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
  60                 "nfsroot=${serverip}:${rootpath}\0"                     \
  61         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
  62         "addip=setenv bootargs ${bootargs} "                            \
  63                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
  64                 ":${hostname}:${netdev}:off panic=1\0"                  \
  65         "flash_nfs=run nfsargs addip;"                                  \
  66                 "bootm ${kernel_addr}\0"                                \
  67         "flash_self=run ramargs addip;"                                 \
  68                 "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
  69         "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"     \
  70         "rootpath=/opt/eldk/ppc_8xx\0"                                  \
  71         "bootfile=/tftpboot/TQM855L/uImage\0"                           \
  72         "fdt_addr=40040000\0"                                           \
  73         "kernel_addr=40060000\0"                                        \
  74         "ramdisk_addr=40200000\0"                                       \
  75         ""
  76 #define CONFIG_BOOTCOMMAND      "run flash_self"
  77
  78 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download  */
  79 #undef  CFG_LOADS_BAUD_CHANGE           /* don't allow baudrate change  */
  80
  81 #undef  CONFIG_WATCHDOG                 /* watchdog disabled            */
  82
  83 #define CONFIG_STATUS_LED       1       /* Status LED enabled           */
  84
  85 #undef  CONFIG_CAN_DRIVER               /* CAN Driver support disabled  */
  86
  87 /*
  88  * BOOTP options
  89  */
  90 #define CONFIG_BOOTP_SUBNETMASK
  91 #define CONFIG_BOOTP_GATEWAY
  92 #define CONFIG_BOOTP_HOSTNAME
  93 #define CONFIG_BOOTP_BOOTPATH
  94 #define CONFIG_BOOTP_BOOTFILESIZE
  95
  96
  97 #define CONFIG_MAC_PARTITION
  98 #define CONFIG_DOS_PARTITION
  99
 100 #define CONFIG_RTC_MPC8xx               /* use internal RTC of MPC8xx   */
 101
 102
 103 /*
 104  * Command line configuration.
 105  */
 106 #include <config_cmd_default.h>
 107
 108 #define CONFIG_CMD_ASKENV
 109 #define CONFIG_CMD_DATE
 110 #define CONFIG_CMD_DHCP
 111 #define CONFIG_CMD_IDE
 112 #define CONFIG_CMD_NFS
 113 #define CONFIG_CMD_SNTP
 114
 115
 116 /*
 117  * Miscellaneous configurable options
 118  */
 119 #define CFG_LONGHELP                    /* undef to save memory         */
 120 #define CFG_PROMPT              "=> "   /* Monitor Command Prompt       */
 121
 122 #define CONFIG_CMDLINE_EDITING  1       /* add command line history     */
 123 #define CFG_HUSH_PARSER         1       /* Use the HUSH parser          */
 124 #ifdef  CFG_HUSH_PARSER
 125 #define CFG_PROMPT_HUSH_PS2     "> "
 126 #endif
 127
 128 #if defined(CONFIG_CMD_KGDB)
 129 #define CFG_CBSIZE              1024    /* Console I/O Buffer Size      */
 130 #else
 131 #define CFG_CBSIZE              256     /* Console I/O Buffer Size      */
 132 #endif
 133 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
 134 #define CFG_MAXARGS             16      /* max number of command args   */
 135 #define CFG_BARGSIZE    CFG_CBSIZE      /* Boot Argument Buffer Size    */
 136
 137 #define CFG_MEMTEST_START       0x0400000       /* memtest works on     */
 138 #define CFG_MEMTEST_END         0x0C00000       /* 4 ... 12 MB in DRAM  */
 139
 140 #define CFG_LOAD_ADDR           0x100000        /* default load address */
 141
 142 #define CFG_HZ                  1000    /* decrementer freq: 1 ms ticks */
 143
 144 #define CFG_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
 145
 146 /*
 147  * Low Level Configuration Settings
 148  * (address mappings, register initial values, etc.)
 149  * You should know what you are doing if you make changes here.
 150  */
 151 /*-----------------------------------------------------------------------
 152  * Internal Memory Mapped Register
 153  */
 154 #define CFG_IMMR                0xFFF00000
 155
 156 /*-----------------------------------------------------------------------
 157  * Definitions for initial stack pointer and data area (in DPRAM)
 158  */
 159 #define CFG_INIT_RAM_ADDR       CFG_IMMR
 160 #define CFG_INIT_RAM_END        0x2F00  /* End of used area in DPRAM    */
 161 #define CFG_GBL_DATA_SIZE       64  /* size in bytes reserved for initial data */
 162 #define CFG_GBL_DATA_OFFSET     (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 163 #define CFG_INIT_SP_OFFSET      CFG_GBL_DATA_OFFSET
 164
 165 /*-----------------------------------------------------------------------
 166  * Start addresses for the final memory configuration
 167  * (Set up by the startup code)
 168  * Please note that CFG_SDRAM_BASE _must_ start at 0
 169  */
 170 #define CFG_SDRAM_BASE          0x00000000
 171 #define CFG_FLASH_BASE          0x40000000
 172 #define CFG_MONITOR_LEN         (256 << 10)     /* Reserve 256 kB for Monitor   */
 173 #define CFG_MONITOR_BASE        CFG_FLASH_BASE
 174 #define CFG_MALLOC_LEN          (128 << 10)     /* Reserve 128 kB for malloc()  */
 175
 176 /*
 177  * For booting Linux, the board info and command line data
 178  * have to be in the first 8 MB of memory, since this is
 179  * the maximum mapped by the Linux kernel during initialization.
 180  */
 181 #define CFG_BOOTMAPSZ           (8 << 20)       /* Initial Memory map for Linux */
 182
 183 /*-----------------------------------------------------------------------
 184  * FLASH organization
 185  */
 186
 187 /* use CFI flash driver */
 188 #define CFG_FLASH_CFI           1       /* Flash is CFI conformant */
 189 #define CFG_FLASH_CFI_DRIVER    1       /* Use the common driver */
 190 #define CFG_FLASH_BANKS_LIST    { CFG_FLASH_BASE }
 191 #define CFG_FLASH_EMPTY_INFO
 192 #define CFG_FLASH_USE_BUFFER_WRITE      1
 193 #define CFG_MAX_FLASH_BANKS     2       /* max number of memory banks */
 194 #define CFG_MAX_FLASH_SECT      71      /* max number of sectors on one chip */
 195
 196 #define CFG_ENV_IS_IN_FLASH     1
 197 #define CFG_ENV_OFFSET          0x8000  /*   Offset   of Environment Sector     */
 198 #define CFG_ENV_SIZE            0x4000  /* Total Size of Environment Sector     */
 199
 200 /* Address and size of Redundant Environment Sector     */
 201 #define CFG_ENV_OFFSET_REDUND   (CFG_ENV_OFFSET+CFG_ENV_SIZE)
 202 #define CFG_ENV_SIZE_REDUND     (CFG_ENV_SIZE)
 203
 204 #define CFG_USE_PPCENV                  /* Environment embedded in sect .ppcenv */
 205
 206 /*-----------------------------------------------------------------------
 207  * Hardware Information Block
 208  */
 209 #define CFG_HWINFO_OFFSET       0x0003FFC0      /* offset of HW Info block */
 210 #define CFG_HWINFO_SIZE         0x00000040      /* size   of HW Info block */
 211 #define CFG_HWINFO_MAGIC        0x54514D38      /* 'TQM8' */
 212
 213 /*-----------------------------------------------------------------------
 214  * Cache Configuration
 215  */
 216 #define CFG_CACHELINE_SIZE      16      /* For all MPC8xx CPUs                  */
 217 #if defined(CONFIG_CMD_KGDB)
 218 #define CFG_CACHELINE_SHIFT     4       /* log base 2 of the above value        */
 219 #endif
 220
 221 /*-----------------------------------------------------------------------
 222  * SYPCR - System Protection Control                            11-9
 223  * SYPCR can only be written once after reset!
 224  *-----------------------------------------------------------------------
 225  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
 226  */
 227 #if defined(CONFIG_WATCHDOG)
 228 #define CFG_SYPCR       (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 229                          SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 230 #else
 231 #define CFG_SYPCR       (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 232 #endif
 233
 234 /*-----------------------------------------------------------------------
 235  * SIUMCR - SIU Module Configuration                            11-6
 236  *-----------------------------------------------------------------------
 237  * PCMCIA config., multi-function pin tri-state
 238  */
 239 #ifndef CONFIG_CAN_DRIVER
 240 #define CFG_SIUMCR      (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 241 #else   /* we must activate GPL5 in the SIUMCR for CAN */
 242 #define CFG_SIUMCR      (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 243 #endif  /* CONFIG_CAN_DRIVER */
 244
 245 /*-----------------------------------------------------------------------
 246  * TBSCR - Time Base Status and Control                         11-26
 247  *-----------------------------------------------------------------------
 248  * Clear Reference Interrupt Status, Timebase freezing enabled
 249  */
 250 #define CFG_TBSCR       (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 251
 252 /*-----------------------------------------------------------------------
 253  * RTCSC - Real-Time Clock Status and Control Register          11-27
 254  *-----------------------------------------------------------------------
 255  */
 256 #define CFG_RTCSC       (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
 257
 258 /*-----------------------------------------------------------------------
 259  * PISCR - Periodic Interrupt Status and Control                11-31
 260  *-----------------------------------------------------------------------
 261  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
 262  */
 263 #define CFG_PISCR       (PISCR_PS | PISCR_PITF)
 264
 265 /*-----------------------------------------------------------------------
 266  * PLPRCR - PLL, Low-Power, and Reset Control Register          15-30
 267  *-----------------------------------------------------------------------
 268  * Reset PLL lock status sticky bit, timer expired status bit and timer
 269  * interrupt status bit
 270  */
 271 #define CFG_PLPRCR      (PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
 272
 273 /*-----------------------------------------------------------------------
 274  * SCCR - System Clock and reset Control Register               15-27
 275  *-----------------------------------------------------------------------
 276  * Set clock output, timebase and RTC source and divider,
 277  * power management and some other internal clocks
 278  */
 279 #define SCCR_MASK       SCCR_EBDF11
 280 #define CFG_SCCR        (SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 281                          SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 282                          SCCR_DFALCD00)
 283
 284 /*-----------------------------------------------------------------------
 285  * PCMCIA stuff
 286  *-----------------------------------------------------------------------
 287  *
 288  */
 289 #define CFG_PCMCIA_MEM_ADDR     (0xE0000000)
 290 #define CFG_PCMCIA_MEM_SIZE     ( 64 << 20 )
 291 #define CFG_PCMCIA_DMA_ADDR     (0xE4000000)
 292 #define CFG_PCMCIA_DMA_SIZE     ( 64 << 20 )
 293 #define CFG_PCMCIA_ATTRB_ADDR   (0xE8000000)
 294 #define CFG_PCMCIA_ATTRB_SIZE   ( 64 << 20 )
 295 #define CFG_PCMCIA_IO_ADDR      (0xEC000000)
 296 #define CFG_PCMCIA_IO_SIZE      ( 64 << 20 )
 297
 298 /*-----------------------------------------------------------------------
 299  * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
 300  *-----------------------------------------------------------------------
 301  */
 302
 303 #define CONFIG_IDE_8xx_PCCARD   1       /* Use IDE with PC Card Adapter */
 304
 305 #undef  CONFIG_IDE_8xx_DIRECT           /* Direct IDE    not supported  */
 306 #undef  CONFIG_IDE_LED                  /* LED   for ide not supported  */
 307 #undef  CONFIG_IDE_RESET                /* reset for ide not supported  */
 308
 309 #define CFG_IDE_MAXBUS          1       /* max. 1 IDE bus               */
 310 #define CFG_IDE_MAXDEVICE       1       /* max. 1 drive per IDE bus     */
 311
 312 #define CFG_ATA_IDE0_OFFSET     0x0000
 313
 314 #define CFG_ATA_BASE_ADDR       CFG_PCMCIA_MEM_ADDR
 315
 316 /* Offset for data I/O                  */
 317 #define CFG_ATA_DATA_OFFSET     (CFG_PCMCIA_MEM_SIZE + 0x320)
 318
 319 /* Offset for normal register accesses  */
 320 #define CFG_ATA_REG_OFFSET      (2 * CFG_PCMCIA_MEM_SIZE + 0x320)
 321
 322 /* Offset for alternate registers       */
 323 #define CFG_ATA_ALT_OFFSET      0x0100
 324
 325 /*-----------------------------------------------------------------------
 326  *
 327  *-----------------------------------------------------------------------
 328  *
 329  */
 330 #define CFG_DER 0
 331
 332 /*
 333  * Init Memory Controller:
 334  *
 335  * BR0/1 and OR0/1 (FLASH)
 336  */
 337
 338 #define FLASH_BASE0_PRELIM      0x40000000      /* FLASH bank #0        */
 339 #define FLASH_BASE1_PRELIM      0x60000000      /* FLASH bank #0        */
 340
 341 /* used to re-map FLASH both when starting from SRAM or FLASH:
 342  * restrict access enough to keep SRAM working (if any)
 343  * but not too much to meddle with FLASH accesses
 344  */
 345 #define CFG_REMAP_OR_AM         0x80000000      /* OR addr mask */
 346 #define CFG_PRELIM_OR_AM        0xE0000000      /* OR addr mask */
 347
 348 /*
 349  * FLASH timing:
 350  */
 351 #define CFG_OR_TIMING_FLASH     (OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
 352                                  OR_SCY_3_CLK | OR_EHTR | OR_BI)
 353
 354 #define CFG_OR0_REMAP   (CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
 355 #define CFG_OR0_PRELIM  (CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
 356 #define CFG_BR0_PRELIM  ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
 357
 358 #define CFG_OR1_REMAP   CFG_OR0_REMAP
 359 #define CFG_OR1_PRELIM  CFG_OR0_PRELIM
 360 #define CFG_BR1_PRELIM  ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
 361
 362 /*
 363  * BR2/3 and OR2/3 (SDRAM)
 364  *
 365  */
 366 #define SDRAM_BASE2_PRELIM      0x00000000      /* SDRAM bank #0        */
 367 #define SDRAM_BASE3_PRELIM      0x20000000      /* SDRAM bank #1        */
 368 #define SDRAM_MAX_SIZE          0x04000000      /* max 64 MB per bank   */
 369
 370 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)      */
 371 #define CFG_OR_TIMING_SDRAM     0x00000A00
 372
 373 #define CFG_OR2_PRELIM  (CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM )
 374 #define CFG_BR2_PRELIM  ((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 375
 376 #ifndef CONFIG_CAN_DRIVER
 377 #define CFG_OR3_PRELIM  CFG_OR2_PRELIM
 378 #define CFG_BR3_PRELIM  ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 379 #else   /* CAN uses CS3#, so we can have only one SDRAM bank anyway */
 380 #define CFG_CAN_BASE            0xC0000000      /* CAN mapped at 0xC0000000     */
 381 #define CFG_CAN_OR_AM           0xFFFF8000      /* 32 kB address mask           */
 382 #define CFG_OR3_CAN             (CFG_CAN_OR_AM | OR_G5LA | OR_BI)
 383 #define CFG_BR3_CAN             ((CFG_CAN_BASE & BR_BA_MSK) | \
 384                                         BR_PS_8 | BR_MS_UPMB | BR_V )
 385 #endif  /* CONFIG_CAN_DRIVER */
 386
 387 /*
 388  * Memory Periodic Timer Prescaler
 389  *
 390  * The Divider for PTA (refresh timer) configuration is based on an
 391  * example SDRAM configuration (64 MBit, one bank). The adjustment to
 392  * the number of chip selects (NCS) and the actually needed refresh
 393  * rate is done by setting MPTPR.
 394  *
 395  * PTA is calculated from
 396  *      PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS)
 397  *
 398  *      gclk      CPU clock (not bus clock!)
 399  *      Trefresh  Refresh cycle * 4 (four word bursts used)
 400  *
 401  * 4096  Rows from SDRAM example configuration
 402  * 1000  factor s -> ms
 403  *   32  PTP (pre-divider from MPTPR) from SDRAM example configuration
 404  *    4  Number of refresh cycles per period
 405  *   64  Refresh cycle in ms per number of rows
 406  * --------------------------------------------
 407  * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000
 408  *
 409  * 50 MHz => 50.000.000 / Divider =  98
 410  * 66 Mhz => 66.000.000 / Divider = 129
 411  * 80 Mhz => 80.000.000 / Divider = 156
 412  */
 413
 414 #define CFG_PTA_PER_CLK ((4096 * 32 * 1000) / (4 * 64))
 415 #define CFG_MAMR_PTA    98
 416
 417 /*
 418  * For 16 MBit, refresh rates could be 31.3 us
 419  * (= 64 ms / 2K = 125 / quad bursts).
 420  * For a simpler initialization, 15.6 us is used instead.
 421  *
 422  * #define CFG_MPTPR_2BK_2K     MPTPR_PTP_DIV32         for 2 banks
 423  * #define CFG_MPTPR_1BK_2K     MPTPR_PTP_DIV64         for 1 bank
 424  */
 425 #define CFG_MPTPR_2BK_4K        MPTPR_PTP_DIV16         /* setting for 2 banks  */
 426 #define CFG_MPTPR_1BK_4K        MPTPR_PTP_DIV32         /* setting for 1 bank   */
 427
 428 /* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit         */
 429 #define CFG_MPTPR_2BK_8K        MPTPR_PTP_DIV8          /* setting for 2 banks  */
 430 #define CFG_MPTPR_1BK_8K        MPTPR_PTP_DIV16         /* setting for 1 bank   */
 431
 432 /*
 433  * MAMR settings for SDRAM
 434  */
 435
 436 /* 8 column SDRAM */
 437 #define CFG_MAMR_8COL   ((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE      |   \
 438                          MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |   \
 439                          MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 440 /* 9 column SDRAM */
 441 #define CFG_MAMR_9COL   ((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE      |   \
 442                          MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |   \
 443                          MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 444
 445
 446 /*
 447  * Internal Definitions
 448  *
 449  * Boot Flags
 450  */
 451 #define BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
 452 #define BOOTFLAG_WARM   0x02            /* Software reboot                      */
 453
 454 #define CONFIG_SCC1_ENET
 455 #define CONFIG_FEC_ENET
 456 #define CONFIG_ETHPRIME         "SCC ETHERNET"
 457
 458 #endif  /* __CONFIG_H */