include/configs/TQM862M.h

   1 /*
   2  * (C) Copyright 2000-2014
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 /*
   9  * board/config.h - configuration options, board specific
  10  */
  11
  12 #ifndef __CONFIG_H
  13 #define __CONFIG_H
  14
  15 /*
  16  * High Level Configuration Options
  17  * (easy to change)
  18  */
  19
  20 #define CONFIG_MPC860           1
  21 #define CONFIG_MPC860T          1
  22 #define CONFIG_MPC862           1
  23 #define CONFIG_DISPLAY_BOARDINFO
  24
  25 #define CONFIG_TQM862M          1       /* ...on a TQM8xxM module       */
  26
  27 #define CONFIG_SYS_TEXT_BASE    0x40000000
  28
  29 #define CONFIG_8xx_CONS_SMC1    1       /* Console is on SMC1           */
  30 #define CONFIG_SYS_SMC_RXBUFLEN 128
  31 #define CONFIG_SYS_MAXIDLE      10
  32 #define CONFIG_BAUDRATE         115200  /* console baudrate = 115kbps   */
  33
  34 #define CONFIG_BOOTCOUNT_LIMIT
  35
  36 #define CONFIG_BOOTDELAY        5       /* autoboot after 5 seconds     */
  37
  38 #define CONFIG_BOARD_TYPES      1       /* support board types          */
  39
  40 #define CONFIG_PREBOOT  "echo;" \
  41         "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
  42         "echo"
  43
  44 #undef  CONFIG_BOOTARGS
  45
  46 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
  47         "netdev=eth0\0"                                                 \
  48         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
  49                 "nfsroot=${serverip}:${rootpath}\0"                     \
  50         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
  51         "addip=setenv bootargs ${bootargs} "                            \
  52                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
  53                 ":${hostname}:${netdev}:off panic=1\0"                  \
  54         "flash_nfs=run nfsargs addip;"                                  \
  55                 "bootm ${kernel_addr}\0"                                \
  56         "flash_self=run ramargs addip;"                                 \
  57                 "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
  58         "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"     \
  59         "rootpath=/opt/eldk/ppc_8xx\0"                                  \
  60         "hostname=TQM862M\0"                                            \
  61         "bootfile=TQM862M/uImage\0"                                     \
  62         "fdt_addr=40080000\0"                                           \
  63         "kernel_addr=400A0000\0"                                        \
  64         "ramdisk_addr=40280000\0"                                       \
  65         "u-boot=TQM862M/u-image.bin\0"                                  \
  66         "load=tftp 200000 ${u-boot}\0"                                  \
  67         "update=prot off 40000000 +${filesize};"                        \
  68                 "era 40000000 +${filesize};"                            \
  69                 "cp.b 200000 40000000 ${filesize};"                     \
  70                 "sete filesize;save\0"                                  \
  71         ""
  72 #define CONFIG_BOOTCOMMAND      "run flash_self"
  73
  74 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download  */
  75 #undef  CONFIG_SYS_LOADS_BAUD_CHANGE            /* don't allow baudrate change  */
  76
  77 #undef  CONFIG_WATCHDOG                 /* watchdog disabled            */
  78
  79 #define CONFIG_STATUS_LED       1       /* Status LED enabled           */
  80
  81 #undef  CONFIG_CAN_DRIVER               /* CAN Driver support disabled  */
  82
  83 /*
  84  * BOOTP options
  85  */
  86 #define CONFIG_BOOTP_SUBNETMASK
  87 #define CONFIG_BOOTP_GATEWAY
  88 #define CONFIG_BOOTP_HOSTNAME
  89 #define CONFIG_BOOTP_BOOTPATH
  90 #define CONFIG_BOOTP_BOOTFILESIZE
  91
  92 #define CONFIG_MAC_PARTITION
  93 #define CONFIG_DOS_PARTITION
  94
  95 #define CONFIG_RTC_MPC8xx               /* use internal RTC of MPC8xx   */
  96
  97 /*
  98  * Command line configuration.
  99  */
 100 #define CONFIG_CMD_DATE
 101 #define CONFIG_CMD_IDE
 102 #define CONFIG_CMD_JFFS2
 103
 104 #define CONFIG_NETCONSOLE
 105
 106 /*
 107  * Miscellaneous configurable options
 108  */
 109 #define CONFIG_SYS_LONGHELP                     /* undef to save memory         */
 110
 111 #define CONFIG_CMDLINE_EDITING  1       /* add command line history     */
 112
 113 #if defined(CONFIG_CMD_KGDB)
 114 #define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size      */
 115 #else
 116 #define CONFIG_SYS_CBSIZE               256     /* Console I/O Buffer Size      */
 117 #endif
 118 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 119 #define CONFIG_SYS_MAXARGS              16      /* max number of command args   */
 120 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size    */
 121
 122 #define CONFIG_SYS_MEMTEST_START        0x0400000       /* memtest works on     */
 123 #define CONFIG_SYS_MEMTEST_END          0x0C00000       /* 4 ... 12 MB in DRAM  */
 124
 125 #define CONFIG_SYS_LOAD_ADDR            0x100000        /* default load address */
 126
 127 /*
 128  * Low Level Configuration Settings
 129  * (address mappings, register initial values, etc.)
 130  * You should know what you are doing if you make changes here.
 131  */
 132 /*-----------------------------------------------------------------------
 133  * Internal Memory Mapped Register
 134  */
 135 #define CONFIG_SYS_IMMR         0xFFF00000
 136
 137 /*-----------------------------------------------------------------------
 138  * Definitions for initial stack pointer and data area (in DPRAM)
 139  */
 140 #define CONFIG_SYS_INIT_RAM_ADDR        CONFIG_SYS_IMMR
 141 #define CONFIG_SYS_INIT_RAM_SIZE        0x2F00  /* Size of used area in DPRAM   */
 142 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 143 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 144
 145 /*-----------------------------------------------------------------------
 146  * Start addresses for the final memory configuration
 147  * (Set up by the startup code)
 148  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 149  */
 150 #define CONFIG_SYS_SDRAM_BASE           0x00000000
 151 #define CONFIG_SYS_FLASH_BASE           0x40000000
 152 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 256 kB for Monitor   */
 153 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
 154 #define CONFIG_SYS_MALLOC_LEN           (128 << 10)     /* Reserve 128 kB for malloc()  */
 155
 156 /*
 157  * For booting Linux, the board info and command line data
 158  * have to be in the first 8 MB of memory, since this is
 159  * the maximum mapped by the Linux kernel during initialization.
 160  */
 161 #define CONFIG_SYS_BOOTMAPSZ            (8 << 20)       /* Initial Memory map for Linux */
 162
 163 /*-----------------------------------------------------------------------
 164  * FLASH organization
 165  */
 166
 167 /* use CFI flash driver */
 168 #define CONFIG_SYS_FLASH_CFI            1       /* Flash is CFI conformant */
 169 #define CONFIG_FLASH_CFI_DRIVER 1       /* Use the common driver */
 170 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE }
 171 #define CONFIG_SYS_FLASH_EMPTY_INFO
 172 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE       1
 173 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* max number of memory banks */
 174 #define CONFIG_SYS_MAX_FLASH_SECT       256     /* max number of sectors on one chip */
 175
 176 #define CONFIG_ENV_IS_IN_FLASH  1
 177 #define CONFIG_ENV_OFFSET               0x40000 /*   Offset   of Environment Sector     */
 178 #define CONFIG_ENV_SIZE         0x08000 /* Total Size of Environment            */
 179 #define CONFIG_ENV_SECT_SIZE    0x20000 /* Total Size of Environment Sector     */
 180
 181 /* Address and size of Redundant Environment Sector     */
 182 #define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET+CONFIG_ENV_SECT_SIZE)
 183 #define CONFIG_ENV_SIZE_REDUND  (CONFIG_ENV_SIZE)
 184
 185 #define CONFIG_SYS_USE_PPCENV                   /* Environment embedded in sect .ppcenv */
 186
 187 #define CONFIG_MISC_INIT_R              /* Make sure to remap flashes correctly */
 188
 189 /*-----------------------------------------------------------------------
 190  * Dynamic MTD partition support
 191  */
 192 #define CONFIG_CMD_MTDPARTS
 193 #define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */
 194 #define CONFIG_FLASH_CFI_MTD
 195 #define MTDIDS_DEFAULT          "nor0=TQM8xxM-0"
 196
 197 #define MTDPARTS_DEFAULT        "mtdparts=TQM8xxM-0:512k(u-boot),"      \
 198                                                 "128k(dtb),"            \
 199                                                 "1920k(kernel),"        \
 200                                                 "5632(rootfs),"         \
 201                                                 "4m(data)"
 202
 203 /*-----------------------------------------------------------------------
 204  * Hardware Information Block
 205  */
 206 #define CONFIG_SYS_HWINFO_OFFSET        0x0003FFC0      /* offset of HW Info block */
 207 #define CONFIG_SYS_HWINFO_SIZE          0x00000040      /* size   of HW Info block */
 208 #define CONFIG_SYS_HWINFO_MAGIC 0x54514D38      /* 'TQM8' */
 209
 210 /*-----------------------------------------------------------------------
 211  * Cache Configuration
 212  */
 213 #define CONFIG_SYS_CACHELINE_SIZE       16      /* For all MPC8xx CPUs                  */
 214 #if defined(CONFIG_CMD_KGDB)
 215 #define CONFIG_SYS_CACHELINE_SHIFT      4       /* log base 2 of the above value        */
 216 #endif
 217
 218 /*-----------------------------------------------------------------------
 219  * SYPCR - System Protection Control                            11-9
 220  * SYPCR can only be written once after reset!
 221  *-----------------------------------------------------------------------
 222  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
 223  */
 224 #if defined(CONFIG_WATCHDOG)
 225 #define CONFIG_SYS_SYPCR        (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 226                          SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 227 #else
 228 #define CONFIG_SYS_SYPCR        (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 229 #endif
 230
 231 /*-----------------------------------------------------------------------
 232  * SIUMCR - SIU Module Configuration                            11-6
 233  *-----------------------------------------------------------------------
 234  * PCMCIA config., multi-function pin tri-state
 235  */
 236 #ifndef CONFIG_CAN_DRIVER
 237 #define CONFIG_SYS_SIUMCR       (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 238 #else   /* we must activate GPL5 in the SIUMCR for CAN */
 239 #define CONFIG_SYS_SIUMCR       (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 240 #endif  /* CONFIG_CAN_DRIVER */
 241
 242 /*-----------------------------------------------------------------------
 243  * TBSCR - Time Base Status and Control                         11-26
 244  *-----------------------------------------------------------------------
 245  * Clear Reference Interrupt Status, Timebase freezing enabled
 246  */
 247 #define CONFIG_SYS_TBSCR        (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 248
 249 /*-----------------------------------------------------------------------
 250  * RTCSC - Real-Time Clock Status and Control Register          11-27
 251  *-----------------------------------------------------------------------
 252  */
 253 #define CONFIG_SYS_RTCSC        (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
 254
 255 /*-----------------------------------------------------------------------
 256  * PISCR - Periodic Interrupt Status and Control                11-31
 257  *-----------------------------------------------------------------------
 258  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
 259  */
 260 #define CONFIG_SYS_PISCR        (PISCR_PS | PISCR_PITF)
 261
 262 /*-----------------------------------------------------------------------
 263  * PLPRCR - PLL, Low-Power, and Reset Control Register          15-30
 264  *-----------------------------------------------------------------------
 265  * Reset PLL lock status sticky bit, timer expired status bit and timer
 266  * interrupt status bit
 267  */
 268 #define CONFIG_SYS_PLPRCR       (PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
 269
 270 /*-----------------------------------------------------------------------
 271  * SCCR - System Clock and reset Control Register               15-27
 272  *-----------------------------------------------------------------------
 273  * Set clock output, timebase and RTC source and divider,
 274  * power management and some other internal clocks
 275  */
 276 #define SCCR_MASK       SCCR_EBDF11
 277 #define CONFIG_SYS_SCCR (SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 278                          SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 279                          SCCR_DFALCD00)
 280
 281 /*-----------------------------------------------------------------------
 282  * PCMCIA stuff
 283  *-----------------------------------------------------------------------
 284  *
 285  */
 286 #define CONFIG_SYS_PCMCIA_MEM_ADDR      (0xE0000000)
 287 #define CONFIG_SYS_PCMCIA_MEM_SIZE      ( 64 << 20 )
 288 #define CONFIG_SYS_PCMCIA_DMA_ADDR      (0xE4000000)
 289 #define CONFIG_SYS_PCMCIA_DMA_SIZE      ( 64 << 20 )
 290 #define CONFIG_SYS_PCMCIA_ATTRB_ADDR    (0xE8000000)
 291 #define CONFIG_SYS_PCMCIA_ATTRB_SIZE    ( 64 << 20 )
 292 #define CONFIG_SYS_PCMCIA_IO_ADDR       (0xEC000000)
 293 #define CONFIG_SYS_PCMCIA_IO_SIZE       ( 64 << 20 )
 294
 295 /*-----------------------------------------------------------------------
 296  * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
 297  *-----------------------------------------------------------------------
 298  */
 299
 300 #define CONFIG_IDE_PREINIT      1       /* Use preinit IDE hook */
 301 #define CONFIG_IDE_8xx_PCCARD   1       /* Use IDE with PC Card Adapter */
 302
 303 #undef  CONFIG_IDE_8xx_DIRECT           /* Direct IDE    not supported  */
 304 #undef  CONFIG_IDE_LED                  /* LED   for ide not supported  */
 305 #undef  CONFIG_IDE_RESET                /* reset for ide not supported  */
 306
 307 #define CONFIG_SYS_IDE_MAXBUS           1       /* max. 1 IDE bus               */
 308 #define CONFIG_SYS_IDE_MAXDEVICE        1       /* max. 1 drive per IDE bus     */
 309
 310 #define CONFIG_SYS_ATA_IDE0_OFFSET      0x0000
 311
 312 #define CONFIG_SYS_ATA_BASE_ADDR        CONFIG_SYS_PCMCIA_MEM_ADDR
 313
 314 /* Offset for data I/O                  */
 315 #define CONFIG_SYS_ATA_DATA_OFFSET      (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 316
 317 /* Offset for normal register accesses  */
 318 #define CONFIG_SYS_ATA_REG_OFFSET       (2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 319
 320 /* Offset for alternate registers       */
 321 #define CONFIG_SYS_ATA_ALT_OFFSET       0x0100
 322
 323 /*-----------------------------------------------------------------------
 324  *
 325  *-----------------------------------------------------------------------
 326  *
 327  */
 328 #define CONFIG_SYS_DER  0
 329
 330 /*
 331  * Init Memory Controller:
 332  *
 333  * BR0/1 and OR0/1 (FLASH)
 334  */
 335
 336 #define FLASH_BASE0_PRELIM      0x40000000      /* FLASH bank #0        */
 337 #define FLASH_BASE1_PRELIM      0x60000000      /* FLASH bank #1        */
 338
 339 /* used to re-map FLASH both when starting from SRAM or FLASH:
 340  * restrict access enough to keep SRAM working (if any)
 341  * but not too much to meddle with FLASH accesses
 342  */
 343 #define CONFIG_SYS_REMAP_OR_AM          0x80000000      /* OR addr mask */
 344 #define CONFIG_SYS_PRELIM_OR_AM 0xE0000000      /* OR addr mask */
 345
 346 /*
 347  * FLASH timing:
 348  */
 349 #define CONFIG_SYS_OR_TIMING_FLASH      (OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
 350                                  OR_SCY_3_CLK | OR_EHTR | OR_BI)
 351
 352 #define CONFIG_SYS_OR0_REMAP    (CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
 353 #define CONFIG_SYS_OR0_PRELIM   (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
 354 #define CONFIG_SYS_BR0_PRELIM   ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
 355
 356 #define CONFIG_SYS_OR1_REMAP    CONFIG_SYS_OR0_REMAP
 357 #define CONFIG_SYS_OR1_PRELIM   CONFIG_SYS_OR0_PRELIM
 358 #define CONFIG_SYS_BR1_PRELIM   ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
 359
 360 /*
 361  * BR2/3 and OR2/3 (SDRAM)
 362  *
 363  */
 364 #define SDRAM_BASE2_PRELIM      0x00000000      /* SDRAM bank #0        */
 365 #define SDRAM_BASE3_PRELIM      0x20000000      /* SDRAM bank #1        */
 366 #define SDRAM_MAX_SIZE          0x04000000      /* max 64 MB per bank   */
 367
 368 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)      */
 369 #define CONFIG_SYS_OR_TIMING_SDRAM      0x00000A00
 370
 371 #define CONFIG_SYS_OR2_PRELIM   (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM )
 372 #define CONFIG_SYS_BR2_PRELIM   ((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 373
 374 #ifndef CONFIG_CAN_DRIVER
 375 #define CONFIG_SYS_OR3_PRELIM   CONFIG_SYS_OR2_PRELIM
 376 #define CONFIG_SYS_BR3_PRELIM   ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 377 #else   /* CAN uses CS3#, so we can have only one SDRAM bank anyway */
 378 #define CONFIG_SYS_CAN_BASE             0xC0000000      /* CAN mapped at 0xC0000000     */
 379 #define CONFIG_SYS_CAN_OR_AM            0xFFFF8000      /* 32 kB address mask           */
 380 #define CONFIG_SYS_OR3_CAN              (CONFIG_SYS_CAN_OR_AM | OR_G5LA | OR_BI)
 381 #define CONFIG_SYS_BR3_CAN              ((CONFIG_SYS_CAN_BASE & BR_BA_MSK) | \
 382                                         BR_PS_8 | BR_MS_UPMB | BR_V )
 383 #endif  /* CONFIG_CAN_DRIVER */
 384
 385 /*
 386  * Memory Periodic Timer Prescaler
 387  *
 388  * The Divider for PTA (refresh timer) configuration is based on an
 389  * example SDRAM configuration (64 MBit, one bank). The adjustment to
 390  * the number of chip selects (NCS) and the actually needed refresh
 391  * rate is done by setting MPTPR.
 392  *
 393  * PTA is calculated from
 394  *      PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS)
 395  *
 396  *      gclk      CPU clock (not bus clock!)
 397  *      Trefresh  Refresh cycle * 4 (four word bursts used)
 398  *
 399  * 4096  Rows from SDRAM example configuration
 400  * 1000  factor s -> ms
 401  *   32  PTP (pre-divider from MPTPR) from SDRAM example configuration
 402  *    4  Number of refresh cycles per period
 403  *   64  Refresh cycle in ms per number of rows
 404  * --------------------------------------------
 405  * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000
 406  *
 407  *  50 MHz =>  50.000.000 / Divider =  98
 408  *  66 Mhz =>  66.000.000 / Divider = 129
 409  *  80 Mhz =>  80.000.000 / Divider = 156
 410  * 100 Mhz => 100.000.000 / Divider = 195
 411  */
 412
 413 #define CONFIG_SYS_PTA_PER_CLK  ((4096 * 32 * 1000) / (4 * 64))
 414 #define CONFIG_SYS_MAMR_PTA     98
 415
 416 /*
 417  * For 16 MBit, refresh rates could be 31.3 us
 418  * (= 64 ms / 2K = 125 / quad bursts).
 419  * For a simpler initialization, 15.6 us is used instead.
 420  *
 421  * #define CONFIG_SYS_MPTPR_2BK_2K      MPTPR_PTP_DIV32         for 2 banks
 422  * #define CONFIG_SYS_MPTPR_1BK_2K      MPTPR_PTP_DIV64         for 1 bank
 423  */
 424 #define CONFIG_SYS_MPTPR_2BK_4K MPTPR_PTP_DIV16         /* setting for 2 banks  */
 425 #define CONFIG_SYS_MPTPR_1BK_4K MPTPR_PTP_DIV32         /* setting for 1 bank   */
 426
 427 /* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit         */
 428 #define CONFIG_SYS_MPTPR_2BK_8K MPTPR_PTP_DIV8          /* setting for 2 banks  */
 429 #define CONFIG_SYS_MPTPR_1BK_8K MPTPR_PTP_DIV16         /* setting for 1 bank   */
 430
 431 /*
 432  * MAMR settings for SDRAM
 433  */
 434
 435 /* 8 column SDRAM */
 436 #define CONFIG_SYS_MAMR_8COL    ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE       |   \
 437                          MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |   \
 438                          MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 439 /* 9 column SDRAM */
 440 #define CONFIG_SYS_MAMR_9COL    ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE       |   \
 441                          MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |   \
 442                          MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 443
 444 #define CONFIG_SCC1_ENET
 445 #define CONFIG_FEC_ENET
 446 #define CONFIG_ETHPRIME         "SCC"
 447
 448 #define CONFIG_HWCONFIG         1
 449
 450 #endif  /* __CONFIG_H */