include/configs/TQM866M.h

   1 /*
   2  * (C) Copyright 2000-2014
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 /*
   9  * board/config.h - configuration options, board specific
  10  */
  11
  12 #ifndef __CONFIG_H
  13 #define __CONFIG_H
  14
  15 /*
  16  * High Level Configuration Options
  17  * (easy to change)
  18  */
  19
  20 #define CONFIG_MPC866           1       /* This is a MPC866 CPU         */
  21 #define CONFIG_TQM866M          1       /* ...on a TQM8xxM module       */
  22 #define CONFIG_DISPLAY_BOARDINFO
  23
  24 #define CONFIG_SYS_TEXT_BASE    0x40000000
  25
  26 #define CONFIG_8xx_OSCLK                10000000        /*  10 MHz - PLL input clock    */
  27 #define CONFIG_SYS_8xx_CPUCLK_MIN               15000000        /*  15 MHz - CPU minimum clock  */
  28 #define CONFIG_SYS_8xx_CPUCLK_MAX               133000000       /* 133 MHz - CPU maximum clock  */
  29 #define CONFIG_8xx_CPUCLK_DEFAULT       50000000        /*  50 MHz - CPU default clock  */
  30                                                 /* (it will be used if there is no      */
  31                                                 /* 'cpuclk' variable with valid value)  */
  32
  33 #undef CONFIG_SYS_MEASURE_CPUCLK                        /* Measure real cpu clock       */
  34                                                 /* (function measure_gclk()     */
  35                                                 /* will be called)              */
  36 #ifdef CONFIG_SYS_MEASURE_CPUCLK
  37 #define CONFIG_SYS_8XX_XIN              10000000        /* measure_gclk() needs this    */
  38 #endif
  39
  40 #define CONFIG_8xx_CONS_SMC1    1       /* Console is on SMC1           */
  41 #define CONFIG_SYS_SMC_RXBUFLEN 128
  42 #define CONFIG_SYS_MAXIDLE      10
  43 #define CONFIG_BAUDRATE         115200  /* console baudrate = 115kbps   */
  44
  45 #define CONFIG_BOOTCOUNT_LIMIT
  46
  47 #define CONFIG_BOOTDELAY        5       /* autoboot after 5 seconds     */
  48
  49 #define CONFIG_BOARD_TYPES      1       /* support board types          */
  50
  51 #define CONFIG_PREBOOT  "echo;" \
  52         "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
  53         "echo"
  54
  55 #undef  CONFIG_BOOTARGS
  56
  57 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
  58         "netdev=eth0\0"                                                 \
  59         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
  60                 "nfsroot=${serverip}:${rootpath}\0"                     \
  61         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
  62         "addip=setenv bootargs ${bootargs} "                            \
  63                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
  64                 ":${hostname}:${netdev}:off panic=1\0"                  \
  65         "flash_nfs=run nfsargs addip;"                                  \
  66                 "bootm ${kernel_addr}\0"                                \
  67         "flash_self=run ramargs addip;"                                 \
  68                 "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
  69         "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"     \
  70         "rootpath=/opt/eldk/ppc_8xx\0"                                  \
  71         "hostname=TQM866M\0"                                            \
  72         "bootfile=TQM866M/uImage\0"                                     \
  73         "fdt_addr=400C0000\0"                                           \
  74         "kernel_addr=40100000\0"                                        \
  75         "ramdisk_addr=40280000\0"                                       \
  76         "u-boot=TQM866M/u-image.bin\0"                                  \
  77         "load=tftp 200000 ${u-boot}\0"                                  \
  78         "update=prot off 40000000 +${filesize};"                        \
  79                 "era 40000000 +${filesize};"                            \
  80                 "cp.b 200000 40000000 ${filesize};"                     \
  81                 "sete filesize;save\0"                                  \
  82         ""
  83 #define CONFIG_BOOTCOMMAND      "run flash_self"
  84
  85 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download  */
  86 #undef  CONFIG_SYS_LOADS_BAUD_CHANGE            /* don't allow baudrate change  */
  87
  88 #undef  CONFIG_WATCHDOG                 /* watchdog disabled            */
  89
  90 #define CONFIG_STATUS_LED       1       /* Status LED enabled           */
  91
  92 #undef  CONFIG_CAN_DRIVER               /* CAN Driver support disabled  */
  93
  94 /* enable I2C and select the hardware/software driver */
  95 #define CONFIG_SYS_I2C
  96 #define CONFIG_SYS_I2C_SOFT                     /* I2C bit-banged */
  97 #define CONFIG_SYS_I2C_SOFT_SPEED       93000   /* 93 kHz is supposed to work */
  98 #define CONFIG_SYS_I2C_SOFT_SLAVE       0xFE
  99
 100 /*
 101  * Software (bit-bang) I2C driver configuration
 102  */
 103 #define PB_SCL          0x00000020      /* PB 26 */
 104 #define PB_SDA          0x00000010      /* PB 27 */
 105
 106 #define I2C_INIT        (immr->im_cpm.cp_pbdir |=  PB_SCL)
 107 #define I2C_ACTIVE      (immr->im_cpm.cp_pbdir |=  PB_SDA)
 108 #define I2C_TRISTATE    (immr->im_cpm.cp_pbdir &= ~PB_SDA)
 109 #define I2C_READ        ((immr->im_cpm.cp_pbdat & PB_SDA) != 0)
 110 #define I2C_SDA(bit)    if(bit) immr->im_cpm.cp_pbdat |=  PB_SDA; \
 111                         else    immr->im_cpm.cp_pbdat &= ~PB_SDA
 112 #define I2C_SCL(bit)    if(bit) immr->im_cpm.cp_pbdat |=  PB_SCL; \
 113                         else    immr->im_cpm.cp_pbdat &= ~PB_SCL
 114 #define I2C_DELAY       udelay(2)       /* 1/4 I2C clock duration */
 115
 116 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50            /* EEPROM AT24C256      */
 117 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2                /* two byte address     */
 118 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       4
 119 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   10      /* and takes up to 10 msec */
 120
 121 /*
 122  * BOOTP options
 123  */
 124 #define CONFIG_BOOTP_SUBNETMASK
 125 #define CONFIG_BOOTP_GATEWAY
 126 #define CONFIG_BOOTP_HOSTNAME
 127 #define CONFIG_BOOTP_BOOTPATH
 128 #define CONFIG_BOOTP_BOOTFILESIZE
 129
 130
 131 #define CONFIG_MAC_PARTITION
 132 #define CONFIG_DOS_PARTITION
 133
 134 #undef CONFIG_RTC_MPC8xx                /* MPC866 does not support RTC  */
 135
 136 #define CONFIG_TIMESTAMP                /* but print image timestmps    */
 137
 138
 139 /*
 140  * Command line configuration.
 141  */
 142 #define CONFIG_CMD_ASKENV
 143 #define CONFIG_CMD_EEPROM
 144 #define CONFIG_CMD_EXT2
 145 #define CONFIG_CMD_IDE
 146 #define CONFIG_CMD_JFFS2
 147
 148 #define CONFIG_NETCONSOLE
 149
 150 /*
 151  * Miscellaneous configurable options
 152  */
 153 #define CONFIG_SYS_LONGHELP                     /* undef to save memory         */
 154
 155 #define CONFIG_CMDLINE_EDITING  1       /* add command line history     */
 156
 157 #if defined(CONFIG_CMD_KGDB)
 158 #define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size      */
 159 #else
 160 #define CONFIG_SYS_CBSIZE               256     /* Console I/O Buffer Size      */
 161 #endif
 162 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 163 #define CONFIG_SYS_MAXARGS              16      /* max number of command args   */
 164 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size    */
 165
 166 #define CONFIG_SYS_MEMTEST_START        0x0400000       /* memtest works on     */
 167 #define CONFIG_SYS_MEMTEST_END          0x0C00000       /* 4 ... 12 MB in DRAM  */
 168
 169 #define CONFIG_SYS_LOAD_ADDR            0x100000        /* default load address */
 170
 171 /*
 172  * Low Level Configuration Settings
 173  * (address mappings, register initial values, etc.)
 174  * You should know what you are doing if you make changes here.
 175  */
 176 /*-----------------------------------------------------------------------
 177  * Internal Memory Mapped Register
 178  */
 179 #define CONFIG_SYS_IMMR         0xFFF00000
 180
 181 /*-----------------------------------------------------------------------
 182  * Definitions for initial stack pointer and data area (in DPRAM)
 183  */
 184 #define CONFIG_SYS_INIT_RAM_ADDR        CONFIG_SYS_IMMR
 185 #define CONFIG_SYS_INIT_RAM_SIZE        0x2F00  /* Size of used area in DPRAM   */
 186 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 187 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 188
 189 /*-----------------------------------------------------------------------
 190  * Start addresses for the final memory configuration
 191  * (Set up by the startup code)
 192  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 193  */
 194 #define CONFIG_SYS_SDRAM_BASE           0x00000000
 195 #define CONFIG_SYS_FLASH_BASE           0x40000000
 196 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 256 kB for Monitor   */
 197 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
 198 #define CONFIG_SYS_MALLOC_LEN           (256 << 10)     /* Reserve 256 kB for malloc()  */
 199
 200 /*
 201  * For booting Linux, the board info and command line data
 202  * have to be in the first 8 MB of memory, since this is
 203  * the maximum mapped by the Linux kernel during initialization.
 204  */
 205 #define CONFIG_SYS_BOOTMAPSZ            (8 << 20)       /* Initial Memory map for Linux */
 206
 207 /*-----------------------------------------------------------------------
 208  * FLASH organization
 209  */
 210 /* use CFI flash driver */
 211 #define CONFIG_SYS_FLASH_CFI            1       /* Flash is CFI conformant */
 212 #define CONFIG_FLASH_CFI_DRIVER 1       /* Use the common driver */
 213 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE }
 214 #define CONFIG_SYS_FLASH_EMPTY_INFO
 215 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE       1
 216 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* max number of memory banks */
 217 #define CONFIG_SYS_MAX_FLASH_SECT       256     /* max number of sectors on one chip */
 218
 219 #define CONFIG_ENV_IS_IN_FLASH  1
 220 #define CONFIG_ENV_OFFSET               0x40000 /*   Offset   of Environment Sector     */
 221 #define CONFIG_ENV_SIZE         0x08000 /* Total Size of Environment Sector     */
 222 #define CONFIG_ENV_SECT_SIZE    0x40000 /* Total Size of Environment Sector     */
 223
 224 /* Address and size of Redundant Environment Sector     */
 225 #define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET+CONFIG_ENV_SECT_SIZE)
 226 #define CONFIG_ENV_SIZE_REDUND  (CONFIG_ENV_SIZE)
 227
 228 #define CONFIG_SYS_USE_PPCENV                   /* Environment embedded in sect .ppcenv */
 229
 230 #define CONFIG_MISC_INIT_R              /* Make sure to remap flashes correctly */
 231
 232 /*-----------------------------------------------------------------------
 233  * Dynamic MTD partition support
 234  */
 235 #define CONFIG_CMD_MTDPARTS
 236 #define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */
 237 #define CONFIG_FLASH_CFI_MTD
 238 #define MTDIDS_DEFAULT          "nor0=TQM8xxM-0"
 239
 240 #define MTDPARTS_DEFAULT        "mtdparts=TQM8xxM-0:512k(u-boot),"      \
 241                                                 "128k(dtb),"            \
 242                                                 "1920k(kernel),"        \
 243                                                 "5632(rootfs),"         \
 244                                                 "4m(data)"
 245
 246 /*-----------------------------------------------------------------------
 247  * Hardware Information Block
 248  */
 249 #define CONFIG_SYS_HWINFO_OFFSET        0x0003FFC0      /* offset of HW Info block */
 250 #define CONFIG_SYS_HWINFO_SIZE          0x00000040      /* size   of HW Info block */
 251 #define CONFIG_SYS_HWINFO_MAGIC 0x54514D38      /* 'TQM8' */
 252
 253 /*-----------------------------------------------------------------------
 254  * Cache Configuration
 255  */
 256 #define CONFIG_SYS_CACHELINE_SIZE       16      /* For all MPC8xx CPUs                  */
 257 #if defined(CONFIG_CMD_KGDB)
 258 #define CONFIG_SYS_CACHELINE_SHIFT      4       /* log base 2 of the above value        */
 259 #endif
 260
 261 /*-----------------------------------------------------------------------
 262  * SYPCR - System Protection Control                            11-9
 263  * SYPCR can only be written once after reset!
 264  *-----------------------------------------------------------------------
 265  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
 266  */
 267 #if defined(CONFIG_WATCHDOG)
 268 #define CONFIG_SYS_SYPCR        (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 269                          SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 270 #else
 271 #define CONFIG_SYS_SYPCR        (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 272 #endif
 273
 274 /*-----------------------------------------------------------------------
 275  * SIUMCR - SIU Module Configuration                            11-6
 276  *-----------------------------------------------------------------------
 277  * PCMCIA config., multi-function pin tri-state
 278  */
 279 #ifndef CONFIG_CAN_DRIVER
 280 #define CONFIG_SYS_SIUMCR       (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 281 #else   /* we must activate GPL5 in the SIUMCR for CAN */
 282 #define CONFIG_SYS_SIUMCR       (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 283 #endif  /* CONFIG_CAN_DRIVER */
 284
 285 /*-----------------------------------------------------------------------
 286  * TBSCR - Time Base Status and Control                         11-26
 287  *-----------------------------------------------------------------------
 288  * Clear Reference Interrupt Status, Timebase freezing enabled
 289  */
 290 #define CONFIG_SYS_TBSCR        (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 291
 292 /*-----------------------------------------------------------------------
 293  * PISCR - Periodic Interrupt Status and Control                11-31
 294  *-----------------------------------------------------------------------
 295  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
 296  */
 297 #define CONFIG_SYS_PISCR        (PISCR_PS | PISCR_PITF)
 298
 299 /*-----------------------------------------------------------------------
 300  * SCCR - System Clock and reset Control Register               15-27
 301  *-----------------------------------------------------------------------
 302  * Set clock output, timebase and RTC source and divider,
 303  * power management and some other internal clocks
 304  */
 305 #define SCCR_MASK       SCCR_EBDF11
 306 #define CONFIG_SYS_SCCR (SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 307                          SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 308                          SCCR_DFALCD00)
 309
 310 /*-----------------------------------------------------------------------
 311  * PCMCIA stuff
 312  *-----------------------------------------------------------------------
 313  *
 314  */
 315 #define CONFIG_SYS_PCMCIA_MEM_ADDR      (0xE0000000)
 316 #define CONFIG_SYS_PCMCIA_MEM_SIZE      ( 64 << 20 )
 317 #define CONFIG_SYS_PCMCIA_DMA_ADDR      (0xE4000000)
 318 #define CONFIG_SYS_PCMCIA_DMA_SIZE      ( 64 << 20 )
 319 #define CONFIG_SYS_PCMCIA_ATTRB_ADDR    (0xE8000000)
 320 #define CONFIG_SYS_PCMCIA_ATTRB_SIZE    ( 64 << 20 )
 321 #define CONFIG_SYS_PCMCIA_IO_ADDR       (0xEC000000)
 322 #define CONFIG_SYS_PCMCIA_IO_SIZE       ( 64 << 20 )
 323
 324 /*-----------------------------------------------------------------------
 325  * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
 326  *-----------------------------------------------------------------------
 327  */
 328
 329 #define CONFIG_IDE_PREINIT      1       /* Use preinit IDE hook */
 330 #define CONFIG_IDE_8xx_PCCARD   1       /* Use IDE with PC Card Adapter */
 331
 332 #undef  CONFIG_IDE_8xx_DIRECT           /* Direct IDE    not supported  */
 333 #undef  CONFIG_IDE_LED                  /* LED   for ide not supported  */
 334 #undef  CONFIG_IDE_RESET                /* reset for ide not supported  */
 335
 336 #define CONFIG_SYS_IDE_MAXBUS           1       /* max. 1 IDE bus               */
 337 #define CONFIG_SYS_IDE_MAXDEVICE        1       /* max. 1 drive per IDE bus     */
 338
 339 #define CONFIG_SYS_ATA_IDE0_OFFSET      0x0000
 340
 341 #define CONFIG_SYS_ATA_BASE_ADDR        CONFIG_SYS_PCMCIA_MEM_ADDR
 342
 343 /* Offset for data I/O                  */
 344 #define CONFIG_SYS_ATA_DATA_OFFSET      (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 345
 346 /* Offset for normal register accesses  */
 347 #define CONFIG_SYS_ATA_REG_OFFSET       (2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 348
 349 /* Offset for alternate registers       */
 350 #define CONFIG_SYS_ATA_ALT_OFFSET       0x0100
 351
 352 /*-----------------------------------------------------------------------
 353  *
 354  *-----------------------------------------------------------------------
 355  *
 356  */
 357 #define CONFIG_SYS_DER 0
 358
 359 /*
 360  * Init Memory Controller:
 361  *
 362  * BR0/1 and OR0/1 (FLASH)
 363  */
 364
 365 #define FLASH_BASE0_PRELIM      0x40000000      /* FLASH bank #0        */
 366 #define FLASH_BASE1_PRELIM      0x60000000      /* FLASH bank #0        */
 367
 368 /* used to re-map FLASH both when starting from SRAM or FLASH:
 369  * restrict access enough to keep SRAM working (if any)
 370  * but not too much to meddle with FLASH accesses
 371  */
 372 #define CONFIG_SYS_REMAP_OR_AM          0x80000000      /* OR addr mask */
 373 #define CONFIG_SYS_PRELIM_OR_AM 0xE0000000      /* OR addr mask */
 374
 375 /*
 376  * FLASH timing: Default value of OR0 after reset
 377  */
 378 #define CONFIG_SYS_OR_TIMING_FLASH      (OR_CSNT_SAM | OR_ACS_MSK | OR_BI | \
 379                                  OR_SCY_15_CLK | OR_TRLX)
 380
 381 #define CONFIG_SYS_OR0_REMAP    (CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
 382 #define CONFIG_SYS_OR0_PRELIM   (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
 383 #define CONFIG_SYS_BR0_PRELIM   ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
 384
 385 #define CONFIG_SYS_OR1_REMAP    CONFIG_SYS_OR0_REMAP
 386 #define CONFIG_SYS_OR1_PRELIM   CONFIG_SYS_OR0_PRELIM
 387 #define CONFIG_SYS_BR1_PRELIM   ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
 388
 389 /*
 390  * BR2/3 and OR2/3 (SDRAM)
 391  *
 392  */
 393 #define SDRAM_BASE2_PRELIM      0x00000000      /* SDRAM bank #0        */
 394 #define SDRAM_BASE3_PRELIM      0x20000000      /* SDRAM bank #1        */
 395 #define SDRAM_MAX_SIZE          (256 << 20)     /* max 256 MB per bank  */
 396
 397 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)      */
 398 #define CONFIG_SYS_OR_TIMING_SDRAM      0x00000A00
 399
 400 #define CONFIG_SYS_OR2_PRELIM   (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM )
 401 #define CONFIG_SYS_BR2_PRELIM   ((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 402
 403 #ifndef CONFIG_CAN_DRIVER
 404 #define CONFIG_SYS_OR3_PRELIM   CONFIG_SYS_OR2_PRELIM
 405 #define CONFIG_SYS_BR3_PRELIM   ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 406 #else   /* CAN uses CS3#, so we can have only one SDRAM bank anyway */
 407 #define CONFIG_SYS_CAN_BASE             0xC0000000      /* CAN mapped at 0xC0000000     */
 408 #define CONFIG_SYS_CAN_OR_AM            0xFFFF8000      /* 32 kB address mask           */
 409 #define CONFIG_SYS_OR3_CAN              (CONFIG_SYS_CAN_OR_AM | OR_G5LA | OR_BI)
 410 #define CONFIG_SYS_BR3_CAN              ((CONFIG_SYS_CAN_BASE & BR_BA_MSK) | \
 411                                         BR_PS_8 | BR_MS_UPMB | BR_V )
 412 #endif  /* CONFIG_CAN_DRIVER */
 413
 414 /*
 415  * 4096 Rows from SDRAM example configuration
 416  * 1000 factor s -> ms
 417  * 64   PTP (pre-divider from MPTPR) from SDRAM example configuration
 418  * 4    Number of refresh cycles per period
 419  * 64   Refresh cycle in ms per number of rows
 420  */
 421 #define CONFIG_SYS_PTA_PER_CLK  ((4096 * 64 * 1000) / (4 * 64))
 422
 423 /*
 424  * Periodic timer (MAMR[PTx]) for 4 * 7.8 us refresh (= 31.2 us per quad)
 425  *
 426  *                        CPUclock(MHz) * 31.2
 427  * CONFIG_SYS_MAMR_PTA = -----------------------------------     with DFBRG = 0
 428  *                2^(2*SCCR[DFBRG]) * MPTPR_PTP_DIV16
 429  *
 430  * CPU clock =  15 MHz:  CONFIG_SYS_MAMR_PTA =  29   ->  4 * 7.73 us
 431  * CPU clock =  50 MHz:  CONFIG_SYS_MAMR_PTA =  97   ->  4 * 7.76 us
 432  * CPU clock =  66 MHz:  CONFIG_SYS_MAMR_PTA = 128   ->  4 * 7.75 us
 433  * CPU clock = 133 MHz:  CONFIG_SYS_MAMR_PTA = 255   ->  4 * 7.67 us
 434  *
 435  * Value 97 is for 4 * 7.8 us at 50 MHz. So the refresh cycle requirement will
 436  * be met also in the default configuration, i.e. if environment variable
 437  * 'cpuclk' is not set.
 438  */
 439 #define CONFIG_SYS_MAMR_PTA             97
 440
 441 /*
 442  * Memory Periodic Timer Prescaler Register (MPTPR) values.
 443  */
 444 /* 4 * 7.8 us refresh (= 31.2 us per quad) at 50 MHz and PTA = 97 */
 445 #define CONFIG_SYS_MPTPR_2BK_4K MPTPR_PTP_DIV16
 446 /* 4 * 3.9 us refresh (= 15.6 us per quad) at 50 MHz and PTA = 97 */
 447 #define CONFIG_SYS_MPTPR_2BK_8K MPTPR_PTP_DIV8
 448
 449 /*
 450  * MAMR settings for SDRAM
 451  */
 452
 453 /* 8 column SDRAM */
 454 #define CONFIG_SYS_MAMR_8COL    ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE       |   \
 455                          MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |   \
 456                          MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 457 /* 9 column SDRAM */
 458 #define CONFIG_SYS_MAMR_9COL    ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE       |   \
 459                          MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |   \
 460                          MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 461 /* 10 column SDRAM */
 462 #define CONFIG_SYS_MAMR_10COL   ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE       |   \
 463                          MAMR_AMA_TYPE_2 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A9  |   \
 464                          MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 465
 466 #define CONFIG_SCC1_ENET
 467 #define CONFIG_FEC_ENET
 468 #define CONFIG_ETHPRIME         "SCC"
 469
 470 #define CONFIG_HWCONFIG         1
 471
 472 #endif  /* __CONFIG_H */