]> git.ipfire.org Git - people/ms/u-boot.git/blob - include/configs/UCP1020.h
projects / people / ms / u-boot.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
Move setexpr to Kconfig
[people/ms/u-boot.git] / include / configs / UCP1020.h
1 /*
2 * Copyright 2013-2015 Arcturus Networks, Inc.
3 * http://www.arcturusnetworks.com/products/ucp1020/
4 * based on include/configs/p1_p2_rdb_pc.h
5 * original copyright follows:
6 * Copyright 2009-2011 Freescale Semiconductor, Inc.
7 *
8 * SPDX-License-Identifier: GPL-2.0+
9 */
10
11 /*
12 * QorIQ uCP1020-xx boards configuration file
13 */
14 #ifndef __CONFIG_H
15 #define __CONFIG_H
16
17 #define CONFIG_SYS_GENERIC_BOARD
18 #define CONFIG_DISPLAY_BOARDINFO
19
20 #define CONFIG_FSL_ELBC
21 #define CONFIG_PCI
22 #define CONFIG_PCIE1 /* PCIE controller 1 (slot 1) */
23 #define CONFIG_PCIE2 /* PCIE controller 2 (slot 2) */
24 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */
25 #define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
26 #define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */
27 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */
28
29 #if defined(CONFIG_TARTGET_UCP1020T1)
30
31 #define CONFIG_UCP1020_REV_1_3
32
33 #define CONFIG_BOARDNAME "uCP1020-64EE512-0U1-XR-T1"
34 #define CONFIG_P1020
35
36 #define CONFIG_TSEC_ENET
37 #define CONFIG_TSEC1
38 #define CONFIG_TSEC3
39 #define CONFIG_HAS_ETH0
40 #define CONFIG_HAS_ETH1
41 #define CONFIG_ETHADDR 00:19:D3:FF:FF:FF
42 #define CONFIG_ETH1ADDR 00:19:D3:FF:FF:FE
43 #define CONFIG_ETH2ADDR 00:19:D3:FF:FF:FD
44 #define CONFIG_IPADDR 10.80.41.229
45 #define CONFIG_SERVERIP 10.80.41.227
46 #define CONFIG_NETMASK 255.255.252.0
47 #define CONFIG_ETHPRIME "eTSEC3"
48
49 #ifndef CONFIG_SPI_FLASH
50 #define CONFIG_SPI_FLASH y
51 #endif
52 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
53
54 #define CONFIG_MMC
55 #define CONFIG_SYS_L2_SIZE (256 << 10)
56
57 #define CONFIG_LAST_STAGE_INIT
58
59 #if !defined(CONFIG_DONGLE)
60 #define CONFIG_SILENT_CONSOLE
61 #endif
62
63 #endif
64
65 #if defined(CONFIG_TARGET_UCP1020)
66
67 #define CONFIG_UCP1020
68 #define CONFIG_UCP1020_REV_1_3
69
70 #define CONFIG_BOARDNAME_LOCAL "uCP1020-64EEE512-OU1-XR"
71 #define CONFIG_P1020
72
73 #define CONFIG_TSEC_ENET
74 #define CONFIG_TSEC1
75 #define CONFIG_TSEC2
76 #define CONFIG_TSEC3
77 #define CONFIG_HAS_ETH0
78 #define CONFIG_HAS_ETH1
79 #define CONFIG_HAS_ETH2
80 #define CONFIG_ETHADDR 00:06:3B:FF:FF:FF
81 #define CONFIG_ETH1ADDR 00:06:3B:FF:FF:FE
82 #define CONFIG_ETH2ADDR 00:06:3B:FF:FF:FD
83 #define CONFIG_IPADDR 192.168.1.81
84 #define CONFIG_IPADDR1 192.168.1.82
85 #define CONFIG_IPADDR2 192.168.1.83
86 #define CONFIG_SERVERIP 192.168.1.80
87 #define CONFIG_GATEWAYIP 102.168.1.1
88 #define CONFIG_NETMASK 255.255.255.0
89 #define CONFIG_ETHPRIME "eTSEC1"
90
91 #ifndef CONFIG_SPI_FLASH
92 #define CONFIG_SPI_FLASH y
93 #endif
94 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
95
96 #define CONFIG_MMC
97 #define CONFIG_SYS_L2_SIZE (256 << 10)
98
99 #define CONFIG_LAST_STAGE_INIT
100
101 #endif
102
103 #ifdef CONFIG_SDCARD
104 #define CONFIG_RAMBOOT_SDCARD
105 #define CONFIG_SYS_RAMBOOT
106 #define CONFIG_SYS_EXTRA_ENV_RELOC
107 #define CONFIG_SYS_TEXT_BASE 0x11000000
108 #define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc
109 #endif
110
111 #ifdef CONFIG_SPIFLASH
112 #define CONFIG_RAMBOOT_SPIFLASH
113 #define CONFIG_SYS_RAMBOOT
114 #define CONFIG_SYS_EXTRA_ENV_RELOC
115 #define CONFIG_SYS_TEXT_BASE 0x11000000
116 #define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc
117 #endif
118
119 #ifndef CONFIG_SYS_TEXT_BASE
120 #define CONFIG_SYS_TEXT_BASE 0xeff80000
121 #endif
122 #define CONFIG_SYS_TEXT_BASE_NOR 0xeff80000
123
124 #ifndef CONFIG_RESET_VECTOR_ADDRESS
125 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc
126 #endif
127
128 #ifndef CONFIG_SYS_MONITOR_BASE
129 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
130 #endif
131
132 /* High Level Configuration Options */
133 #define CONFIG_BOOKE
134 #define CONFIG_E500
135 /* #define CONFIG_MPC85xx */
136
137 #define CONFIG_MP
138
139 #define CONFIG_FSL_LAW
140
141 #define CONFIG_ENV_OVERWRITE
142
143 #define CONFIG_CMD_SATA
144 #define CONFIG_SATA_SIL
145 #define CONFIG_SYS_SATA_MAX_DEVICE 2
146 #define CONFIG_LIBATA
147 #define CONFIG_LBA48
148
149 #define CONFIG_SYS_CLK_FREQ 66666666
150 #define CONFIG_DDR_CLK_FREQ 66666666
151
152 #define CONFIG_HWCONFIG
153
154 #define CONFIG_DTT_ADM1021 1 /* ADM1021 temp sensor support */
155 #define CONFIG_SYS_DTT_BUS_NUM 1 /* The I2C bus for DTT */
156 #define CONFIG_DTT_SENSORS { 0, 1 } /* Sensor index */
157 /*
158 * ADM1021/NCT72 temp sensor configuration (see dtt/adm1021.c for details).
159 * there will be one entry in this array for each two (dummy) sensors in
160 * CONFIG_DTT_SENSORS.
161 *
162 * For uCP1020 module:
163 * - only one ADM1021/NCT72
164 * - i2c addr 0x41
165 * - conversion rate 0x02 = 0.25 conversions/second
166 * - ALERT output disabled
167 * - local temp sensor enabled, min set to 0 deg, max set to 85 deg
168 * - remote temp sensor enabled, min set to 0 deg, max set to 85 deg
169 */
170 #define CONFIG_SYS_DTT_ADM1021 { { CONFIG_SYS_I2C_NCT72_ADDR, \
171 0x02, 0, 1, 0, 85, 1, 0, 85} }
172
173 #define CONFIG_CMD_DTT
174
175 /*
176 * These can be toggled for performance analysis, otherwise use default.
177 */
178 #define CONFIG_L2_CACHE
179 #define CONFIG_BTB
180
181 #define CONFIG_BOARD_EARLY_INIT_F /* Call board_pre_init */
182
183 #define CONFIG_ENABLE_36BIT_PHYS
184
185 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */
186 #define CONFIG_SYS_MEMTEST_END 0x1fffffff
187 #define CONFIG_PANIC_HANG /* do not reset board on panic */
188
189 #define CONFIG_SYS_CCSRBAR 0xffe00000
190 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
191
192 /* IN case of NAND bootloader relocate CCSRBAR in RAMboot code not in the 4k
193 SPL code*/
194 #ifdef CONFIG_SPL_BUILD
195 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
196 #endif
197
198 /* DDR Setup */
199 #define CONFIG_DDR_ECC_ENABLE
200 #define CONFIG_SYS_FSL_DDR3
201 #ifndef CONFIG_DDR_ECC_ENABLE
202 #define CONFIG_SYS_DDR_RAW_TIMING
203 #define CONFIG_DDR_SPD
204 #endif
205 #define CONFIG_SYS_SPD_BUS_NUM 1
206 #undef CONFIG_FSL_DDR_INTERACTIVE
207
208 #define CONFIG_SYS_SDRAM_SIZE_LAW LAW_SIZE_512M
209 #define CONFIG_CHIP_SELECTS_PER_CTRL 1
210 #define CONFIG_SYS_SDRAM_SIZE (1u << (CONFIG_SYS_SDRAM_SIZE_LAW - 19))
211 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
212 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
213
214 #define CONFIG_NUM_DDR_CONTROLLERS 1
215 #define CONFIG_DIMM_SLOTS_PER_CTLR 1
216
217 /* Default settings for DDR3 */
218 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000003f
219 #define CONFIG_SYS_DDR_CS0_CONFIG 0x80014302
220 #define CONFIG_SYS_DDR_CS0_CONFIG_2 0x00000000
221 #define CONFIG_SYS_DDR_CS1_BNDS 0x0040007f
222 #define CONFIG_SYS_DDR_CS1_CONFIG 0x80014302
223 #define CONFIG_SYS_DDR_CS1_CONFIG_2 0x00000000
224
225 #define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef
226 #define CONFIG_SYS_DDR_INIT_ADDR 0x00000000
227 #define CONFIG_SYS_DDR_INIT_EXT_ADDR 0x00000000
228 #define CONFIG_SYS_DDR_MODE_CONTROL 0x00000000
229
230 #define CONFIG_SYS_DDR_ZQ_CONTROL 0x89080600
231 #define CONFIG_SYS_DDR_WRLVL_CONTROL 0x8655A608
232 #define CONFIG_SYS_DDR_SR_CNTR 0x00000000
233 #define CONFIG_SYS_DDR_RCW_1 0x00000000
234 #define CONFIG_SYS_DDR_RCW_2 0x00000000
235 #ifdef CONFIG_DDR_ECC_ENABLE
236 #define CONFIG_SYS_DDR_CONTROL 0xE70C0000 /* Type = DDR3 & ECC */
237 #else
238 #define CONFIG_SYS_DDR_CONTROL 0xC70C0000 /* Type = DDR3 */
239 #endif
240 #define CONFIG_SYS_DDR_CONTROL_2 0x04401050
241 #define CONFIG_SYS_DDR_TIMING_4 0x00220001
242 #define CONFIG_SYS_DDR_TIMING_5 0x03402400
243
244 #define CONFIG_SYS_DDR_TIMING_3 0x00020000
245 #define CONFIG_SYS_DDR_TIMING_0 0x00330004
246 #define CONFIG_SYS_DDR_TIMING_1 0x6f6B4846
247 #define CONFIG_SYS_DDR_TIMING_2 0x0FA8C8CF
248 #define CONFIG_SYS_DDR_CLK_CTRL 0x03000000
249 #define CONFIG_SYS_DDR_MODE_1 0x40461520
250 #define CONFIG_SYS_DDR_MODE_2 0x8000c000
251 #define CONFIG_SYS_DDR_INTERVAL 0x0C300000
252
253 #undef CONFIG_CLOCKS_IN_MHZ
254
255 /*
256 * Memory map
257 *
258 * 0x0000_0000 0x7fff_ffff DDR Up to 2GB cacheable
259 * 0x8000_0000 0xdfff_ffff PCI Express Mem 1G non-cacheable(PCIe * 2)
260 * 0xec00_0000 0xefff_ffff NOR flash Up to 64M non-cacheable CS0/1
261 * 0xf8f8_0000 0xf8ff_ffff L2 SRAM Up to 256K cacheable
262 * (early boot only)
263 * 0xffc0_0000 0xffc3_ffff PCI IO range 256k non-cacheable
264 * 0xffd0_0000 0xffd0_3fff L1 for stack 16K cacheable
265 * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable
266 */
267
268 /*
269 * Local Bus Definitions
270 */
271 #define CONFIG_SYS_MAX_FLASH_SECT 512 /* 64M */
272 #define CONFIG_SYS_FLASH_BASE 0xec000000
273
274 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
275
276 #define CONFIG_FLASH_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \
277 | BR_PS_16 | BR_V)
278
279 #define CONFIG_FLASH_OR_PRELIM 0xfc000ff7
280
281 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS}
282 #define CONFIG_SYS_FLASH_QUIET_TEST
283 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
284
285 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
286
287 #undef CONFIG_SYS_FLASH_CHECKSUM
288 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
289 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
290
291 #define CONFIG_FLASH_CFI_DRIVER
292 #define CONFIG_SYS_FLASH_CFI
293 #define CONFIG_SYS_FLASH_EMPTY_INFO
294 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
295
296 #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */
297
298 #define CONFIG_SYS_INIT_RAM_LOCK
299 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */
300 /* Initial L1 address */
301 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR
302 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
303 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
304 /* Size of used area in RAM */
305 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000
306
307 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
308 GENERATED_GBL_DATA_SIZE)
309 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
310
311 #define CONFIG_SYS_MONITOR_LEN (256 * 1024)/* Reserve 256 kB for Mon */
312 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024)/* Reserved for malloc */
313
314 #define CONFIG_SYS_PMC_BASE 0xff980000
315 #define CONFIG_SYS_PMC_BASE_PHYS CONFIG_SYS_PMC_BASE
316 #define CONFIG_PMC_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_PMC_BASE_PHYS) | \
317 BR_PS_8 | BR_V)
318 #define CONFIG_PMC_OR_PRELIM (OR_AM_64KB | OR_GPCM_CSNT | OR_GPCM_XACS | \
319 OR_GPCM_SCY | OR_GPCM_TRLX | OR_GPCM_EHTR | \
320 OR_GPCM_EAD)
321
322 #define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */
323 #define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */
324 #ifdef CONFIG_NAND_FSL_ELBC
325 #define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */
326 #define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
327 #endif
328
329 /* Serial Port - controlled on board with jumper J8
330 * open - index 2
331 * shorted - index 1
332 */
333 #define CONFIG_CONS_INDEX 1
334 #undef CONFIG_SERIAL_SOFTWARE_FIFO
335 #define CONFIG_SYS_NS16550
336 #define CONFIG_SYS_NS16550_SERIAL
337 #define CONFIG_SYS_NS16550_REG_SIZE 1
338 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
339 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL)
340 #define CONFIG_NS16550_MIN_FUNCTIONS
341 #endif
342
343 #define CONFIG_SYS_BAUDRATE_TABLE \
344 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
345
346 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR + 0x4500)
347 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR + 0x4600)
348
349 /* Use the HUSH parser */
350 #define CONFIG_SYS_HUSH_PARSER
351
352 /*
353 * Pass open firmware flat tree
354 */
355 #define CONFIG_OF_LIBFDT
356 #define CONFIG_OF_BOARD_SETUP
357 #define CONFIG_OF_STDOUT_VIA_ALIAS
358
359 /* new uImage format support */
360 #define CONFIG_FIT
361 #define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */
362
363 /* I2C */
364 #define CONFIG_SYS_I2C
365 #define CONFIG_SYS_I2C_FSL
366 #define CONFIG_SYS_FSL_I2C_SPEED 400000
367 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
368 #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000
369 #define CONFIG_SYS_FSL_I2C2_SPEED 400000
370 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F
371 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100
372 #define CONFIG_SYS_I2C_NOPROBES { {0, 0x29} }
373 #define CONFIG_SYS_SPD_BUS_NUM 1 /* For rom_loc and flash bank */
374
375 #define CONFIG_RTC_DS1337
376 #define CONFIG_SYS_RTC_DS1337_NOOSC
377 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
378 #define CONFIG_SYS_I2C_PCA9557_ADDR 0x18
379 #define CONFIG_SYS_I2C_NCT72_ADDR 0x4C
380 #define CONFIG_SYS_I2C_IDT6V49205B 0x69
381
382 /*
383 * eSPI - Enhanced SPI
384 */
385 #define CONFIG_HARD_SPI
386 #define CONFIG_FSL_ESPI
387
388 #define CONFIG_SPI_FLASH_SST 1
389 #define CONFIG_SPI_FLASH_STMICRO 1
390 #define CONFIG_SPI_FLASH_WINBOND 1
391 #define CONFIG_CMD_SF 1
392 #define CONFIG_CMD_SPI 1
393 #define CONFIG_SF_DEFAULT_SPEED 10000000
394 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
395
396 #if defined(CONFIG_PCI)
397 /*
398 * General PCI
399 * Memory space is mapped 1-1, but I/O space must start from 0.
400 */
401
402 /* controller 2, direct to uli, tgtid 2, Base address 9000 */
403 #define CONFIG_SYS_PCIE2_NAME "PCIe SLOT CON9"
404 #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000
405 #define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000
406 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000
407 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */
408 #define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000
409 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000
410 #define CONFIG_SYS_PCIE2_IO_PHYS 0xffc10000
411 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */
412
413 /* controller 1, Slot 2, tgtid 1, Base address a000 */
414 #define CONFIG_SYS_PCIE1_NAME "PCIe SLOT CON10"
415 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000
416 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000
417 #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000
418 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */
419 #define CONFIG_SYS_PCIE1_IO_VIRT 0xffc00000
420 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
421 #define CONFIG_SYS_PCIE1_IO_PHYS 0xffc00000
422 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */
423
424 #define CONFIG_PCI_PNP /* do pci plug-and-play */
425 #define CONFIG_E1000 /* Defind e1000 pci Ethernet card*/
426 #define CONFIG_CMD_PCI
427 #define CONFIG_CMD_NET
428
429 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
430 #define CONFIG_DOS_PARTITION
431 #endif /* CONFIG_PCI */
432
433 /*
434 * Environment
435 */
436 #ifdef CONFIG_ENV_FIT_UCBOOT
437
438 #define CONFIG_ENV_IS_IN_FLASH
439 #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x20000)
440 #define CONFIG_ENV_SIZE 0x20000
441 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */
442
443 #else
444
445 #define CONFIG_ENV_SPI_BUS 0
446 #define CONFIG_ENV_SPI_CS 0
447 #define CONFIG_ENV_SPI_MAX_HZ 10000000
448 #define CONFIG_ENV_SPI_MODE 0
449
450 #ifdef CONFIG_RAMBOOT_SPIFLASH
451
452 #define CONFIG_ENV_IS_IN_SPI_FLASH
453 #define CONFIG_ENV_SIZE 0x3000 /* 12KB */
454 #define CONFIG_ENV_OFFSET 0x2000 /* 8KB */
455 #define CONFIG_ENV_SECT_SIZE 0x1000
456
457 #if defined(CONFIG_SYS_REDUNDAND_ENVIRONMENT)
458 /* Address and size of Redundant Environment Sector */
459 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
460 #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
461 #endif
462
463 #elif defined(CONFIG_RAMBOOT_SDCARD)
464 #define CONFIG_ENV_IS_IN_MMC
465 #define CONFIG_FSL_FIXED_MMC_LOCATION
466 #define CONFIG_ENV_SIZE 0x2000
467 #define CONFIG_SYS_MMC_ENV_DEV 0
468
469 #elif defined(CONFIG_SYS_RAMBOOT)
470 #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */
471 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000)
472 #define CONFIG_ENV_SIZE 0x2000
473
474 #else
475 #define CONFIG_ENV_IS_IN_FLASH
476 #define CONFIG_ENV_BASE (CONFIG_SYS_FLASH_BASE)
477 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */
478 #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
479 #define CONFIG_ENV_ADDR (CONFIG_ENV_BASE + 0xC0000)
480 #if defined(CONFIG_SYS_REDUNDAND_ENVIRONMENT)
481 /* Address and size of Redundant Environment Sector */
482 #define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SIZE)
483 #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
484 #endif
485
486 #endif
487
488 #endif /* CONFIG_ENV_FIT_UCBOOT */
489
490 #define CONFIG_LOADS_ECHO /* echo on for serial download */
491 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
492
493 /*
494 * Command line configuration.
495 */
496 #include <config_cmd_default.h>
497
498 #define CONFIG_CMD_IRQ
499 #define CONFIG_CMD_PING
500 #define CONFIG_CMD_I2C
501 #define CONFIG_CMD_MII
502 #define CONFIG_CMD_DATE
503 #define CONFIG_CMD_ELF
504 #define CONFIG_CMD_I2C
505 #define CONFIG_CMD_IRQ
506 #define CONFIG_CMD_MII
507 #define CONFIG_CMD_PING
508 #define CONFIG_CMD_REGINFO
509 #define CONFIG_CMD_ERRATA
510 #define CONFIG_CMD_CRAMFS
511 #define CONFIG_CRAMFS_CMDLINE
512
513 /*
514 * USB
515 */
516 #define CONFIG_HAS_FSL_DR_USB
517
518 #if defined(CONFIG_HAS_FSL_DR_USB)
519 #define CONFIG_USB_EHCI
520
521 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1
522
523 #ifdef CONFIG_USB_EHCI
524 #define CONFIG_CMD_USB
525 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
526 #define CONFIG_USB_EHCI_FSL
527 #define CONFIG_USB_STORAGE
528 #endif
529 #endif
530
531 #undef CONFIG_WATCHDOG /* watchdog disabled */
532
533 #ifdef CONFIG_MMC
534 #define CONFIG_FSL_ESDHC
535 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
536 #define CONFIG_CMD_MMC
537 #define CONFIG_MMC_SPI
538 #define CONFIG_CMD_MMC_SPI
539 #define CONFIG_GENERIC_MMC
540 #endif
541
542 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) || defined(CONFIG_FSL_SATA)
543 #define CONFIG_CMD_EXT2
544 #define CONFIG_CMD_FAT
545 #define CONFIG_DOS_PARTITION
546 #endif
547
548 /* Misc Extra Settings */
549 #define CONFIG_CMD_GPIO 1
550 #undef CONFIG_WATCHDOG /* watchdog disabled */
551
552 /*
553 * Miscellaneous configurable options
554 */
555 #define CONFIG_SYS_LONGHELP /* undef to save memory */
556 #define CONFIG_CMDLINE_EDITING /* Command-line editing */
557 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
558 #define CONFIG_SYS_PROMPT "B$ " /* Monitor Command Prompt */
559 #if defined(CONFIG_CMD_KGDB)
560 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
561 #else
562 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
563 #endif
564 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
565 /* Print Buffer Size */
566 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */
567 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
568 #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms tick */
569
570 /*
571 * For booting Linux, the board info and command line data
572 * have to be in the first 64 MB of memory, since this is
573 * the maximum mapped by the Linux kernel during initialization.
574 */
575 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory for Linux*/
576 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
577
578 #if defined(CONFIG_CMD_KGDB)
579 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
580 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
581 #endif
582
583 /*
584 * Environment Configuration
585 */
586
587 #if defined(CONFIG_TSEC_ENET)
588
589 #if defined(CONFIG_UCP1020_REV_1_2)
590 #define CONFIG_PHY_MICREL_KSZ9021
591 #elif defined(CONFIG_UCP1020_REV_1_3)
592 #define CONFIG_PHY_MICREL_KSZ9031
593 #else
594 #error "UCP1020 module revision is not defined !!!"
595 #endif
596
597 #define CONFIG_CMD_DHCP
598 #define CONFIG_BOOTP_SERVERIP
599
600 #define CONFIG_MII /* MII PHY management */
601 #define CONFIG_TSEC1_NAME "eTSEC1"
602 #define CONFIG_TSEC2_NAME "eTSEC2"
603 #define CONFIG_TSEC3_NAME "eTSEC3"
604
605 #define TSEC1_PHY_ADDR 4
606 #define TSEC2_PHY_ADDR 0
607 #define TSEC2_PHY_ADDR_SGMII 0x00
608 #define TSEC3_PHY_ADDR 6
609
610 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
611 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
612 #define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
613
614 #define TSEC1_PHYIDX 0
615 #define TSEC2_PHYIDX 0
616 #define TSEC3_PHYIDX 0
617
618 #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
619
620 #endif
621
622 #define CONFIG_HOSTNAME UCP1020
623 #define CONFIG_ROOTPATH "/opt/nfsroot"
624 #define CONFIG_BOOTFILE "uImage"
625 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */
626
627 /* default location for tftp and bootm */
628 #define CONFIG_LOADADDR 1000000
629
630 /*
631 * Autobooting
632 */
633 #define CONFIG_AUTOBOOT_KEYED
634 #define CONFIG_AUTOBOOT_STOP_STR "\x1b"
635 #define DEBUG_BOOTKEYS 0
636 #undef CONFIG_AUTOBOOT_DELAY_STR
637 #undef CONFIG_BOOTARGS
638 #define CONFIG_AUTOBOOT_PROMPT "Autobooting in %d seconds, " \
639 "press \"<Esc>\" to stop\n", bootdelay
640
641 #define CONFIG_BOOTARGS /* the boot command will set bootargs */
642
643 #define CONFIG_BAUDRATE 115200
644
645 #if defined(CONFIG_DONGLE)
646
647 #define CONFIG_BOOTDELAY 1 /* autoboot after 1 seconds */
648 #define CONFIG_EXTRA_ENV_SETTINGS \
649 "bootcmd=run prog_spi_mbrbootcramfs\0" \
650 "bootfile=uImage\0" \
651 "consoledev=ttyS0\0" \
652 "cramfsfile=image.cramfs\0" \
653 "dtbaddr=0x00c00000\0" \
654 "dtbfile=image.dtb\0" \
655 "ethaddr=" __stringify(CONFIG_ETHADDR) "\0" \
656 "eth1addr=" __stringify(CONFIG_ETH1ADDR) "\0" \
657 "eth2addr=" __stringify(CONFIG_ETH2ADDR) "\0" \
658 "fileaddr=0x01000000\0" \
659 "filesize=0x00080000\0" \
660 "flashmbr=sf probe 0; " \
661 "tftp $loadaddr $mbr; " \
662 "sf erase $mbr_offset +$filesize; " \
663 "sf write $loadaddr $mbr_offset $filesize\0" \
664 "flashrecovery=tftp $recoveryaddr $cramfsfile; " \
665 "protect off $nor_recoveryaddr +$filesize; " \
666 "erase $nor_recoveryaddr +$filesize; " \
667 "cp.b $recoveryaddr $nor_recoveryaddr $filesize; " \
668 "protect on $nor_recoveryaddr +$filesize\0 " \
669 "flashuboot=tftp $ubootaddr $ubootfile; " \
670 "protect off $nor_ubootaddr +$filesize; " \
671 "erase $nor_ubootaddr +$filesize; " \
672 "cp.b $ubootaddr $nor_ubootaddr $filesize; " \
673 "protect on $nor_ubootaddr +$filesize\0 " \
674 "flashworking=tftp $workingaddr $cramfsfile; " \
675 "protect off $nor_workingaddr +$filesize; " \
676 "erase $nor_workingaddr +$filesize; " \
677 "cp.b $workingaddr $nor_workingaddr $filesize; " \
678 "protect on $nor_workingaddr +$filesize\0 " \
679 "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0 " \
680 "kerneladdr=0x01100000\0" \
681 "kernelfile=uImage\0" \
682 "loadaddr=0x01000000\0" \
683 "mbr=uCP1020d.mbr\0" \
684 "mbr_offset=0x00000000\0" \
685 "mmbr=uCP1020Quiet.mbr\0" \
686 "mmcpart=0:2\0" \
687 "mmc__mbrd=fatload mmc $mmcpart $loadaddr $mbr; " \
688 "mmc erase 1 1; " \
689 "mmc write $loadaddr 1 1\0" \
690 "mmc__uboot=fatload mmc $mmcpart $loadaddr $ubootfile; " \
691 "mmc erase 0x40 0x400; " \
692 "mmc write $loadaddr 0x40 0x400\0" \
693 "netdev=eth0\0" \
694 "nor_recoveryaddr=0xEC0A0000\0" \
695 "nor_ubootaddr=0xEFF80000\0" \
696 "nor_workingaddr=0xECFA0000\0" \
697 "norbootrecovery=setenv bootargs $recoverybootargs" \
698 " console=$consoledev,$baudrate $othbootargs; " \
699 "run norloadrecovery; " \
700 "bootm $kerneladdr - $dtbaddr\0" \
701 "norbootworking=setenv bootargs $workingbootargs" \
702 " console=$consoledev,$baudrate $othbootargs; " \
703 "run norloadworking; " \
704 "bootm $kerneladdr - $dtbaddr\0" \
705 "norloadrecovery=mw.l $kerneladdr 0x0 0x00a00000; " \
706 "setenv cramfsaddr $nor_recoveryaddr; " \
707 "cramfsload $dtbaddr $dtbfile; " \
708 "cramfsload $kerneladdr $kernelfile\0" \
709 "norloadworking=mw.l $kerneladdr 0x0 0x00a00000; " \
710 "setenv cramfsaddr $nor_workingaddr; " \
711 "cramfsload $dtbaddr $dtbfile; " \
712 "cramfsload $kerneladdr $kernelfile\0" \
713 "prog_spi_mbr=run spi__mbr\0" \
714 "prog_spi_mbrboot=run spi__mbr; run spi__boot1; run spi__boot2\0" \
715 "prog_spi_mbrbootcramfs=run spi__mbr; run spi__boot1; run spi__boot2; " \
716 "run spi__cramfs\0" \
717 "ramboot=setenv bootargs root=/dev/ram ramdisk_size=$ramdisk_size ro" \
718 " console=$consoledev,$baudrate $othbootargs; " \
719 "tftp $rootfsaddr $rootfsfile; " \
720 "tftp $loadaddr $kernelfile; " \
721 "tftp $dtbaddr $dtbfile; " \
722 "bootm $loadaddr $rootfsaddr $dtbaddr\0" \
723 "ramdisk_size=120000\0" \
724 "ramdiskfile=rootfs.ext2.gz.uboot\0" \
725 "recoveryaddr=0x02F00000\0" \
726 "recoverybootargs=root=/dev/mtdblock0 rootfstype=cramfs ro\0" \
727 "releasefpga=mw.l 0xffe0f000 0x00400000; mw.l 0xffe0f004 0x00000000; " \
728 "mw.l 0xffe0f008 0x00400000\0" \
729 "rootfsaddr=0x02F00000\0" \
730 "rootfsfile=rootfs.ext2.gz.uboot\0" \
731 "rootpath=/opt/nfsroot\0" \
732 "spi__boot1=fatload mmc $mmcpart $loadaddr u-boot.bin; " \
733 "protect off 0xeC000000 +$filesize; " \
734 "erase 0xEC000000 +$filesize; " \
735 "cp.b $loadaddr 0xEC000000 $filesize; " \
736 "cmp.b $loadaddr 0xEC000000 $filesize; " \
737 "protect on 0xeC000000 +$filesize\0" \
738 "spi__boot2=fatload mmc $mmcpart $loadaddr u-boot.bin; " \
739 "protect off 0xeFF80000 +$filesize; " \
740 "erase 0xEFF80000 +$filesize; " \
741 "cp.b $loadaddr 0xEFF80000 $filesize; " \
742 "cmp.b $loadaddr 0xEFF80000 $filesize; " \
743 "protect on 0xeFF80000 +$filesize\0" \
744 "spi__bootd=fatload mmc $mmcpart $loadaddr $ubootd; " \
745 "sf probe 0; sf erase 0x8000 +$filesize; " \
746 "sf write $loadaddr 0x8000 $filesize\0" \
747 "spi__cramfs=fatload mmc $mmcpart $loadaddr image.cramfs; " \
748 "protect off 0xec0a0000 +$filesize; " \
749 "erase 0xeC0A0000 +$filesize; " \
750 "cp.b $loadaddr 0xeC0A0000 $filesize; " \
751 "protect on 0xec0a0000 +$filesize\0" \
752 "spi__mbr=fatload mmc $mmcpart $loadaddr $mmbr; " \
753 "sf probe 1; sf erase 0 +$filesize; " \
754 "sf write $loadaddr 0 $filesize\0" \
755 "spi__mbrd=fatload mmc $mmcpart $loadaddr $mbr; " \
756 "sf probe 0; sf erase 0 +$filesize; " \
757 "sf write $loadaddr 0 $filesize\0" \
758 "tftpflash=tftpboot $loadaddr $uboot; " \
759 "protect off " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
760 "erase " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
761 "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize; " \
762 "protect on " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
763 "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize\0"\
764 "uboot= " __stringify(CONFIG_UBOOTPATH) "\0" \
765 "ubootaddr=0x01000000\0" \
766 "ubootfile=u-boot.bin\0" \
767 "ubootd=u-boot4dongle.bin\0" \
768 "upgrade=run flashworking\0" \
769 "usb_phy_type=ulpi\0 " \
770 "workingaddr=0x02F00000\0" \
771 "workingbootargs=root=/dev/mtdblock1 rootfstype=cramfs ro\0"
772
773 #else
774
775 #if defined(CONFIG_UCP1020T1)
776
777 #define CONFIG_BOOTDELAY 2 /* autoboot after 2 sec, -1 disables auto-boot */
778 #define CONFIG_EXTRA_ENV_SETTINGS \
779 "bootcmd=run releasefpga; run norbootworking || run norbootrecovery\0" \
780 "bootfile=uImage\0" \
781 "consoledev=ttyS0\0" \
782 "cramfsfile=image.cramfs\0" \
783 "dtbaddr=0x00c00000\0" \
784 "dtbfile=image.dtb\0" \
785 "ethaddr=" __stringify(CONFIG_ETHADDR) "\0" \
786 "eth1addr=" __stringify(CONFIG_ETH1ADDR) "\0" \
787 "eth2addr=" __stringify(CONFIG_ETH2ADDR) "\0" \
788 "fileaddr=0x01000000\0" \
789 "filesize=0x00080000\0" \
790 "flashmbr=sf probe 0; " \
791 "tftp $loadaddr $mbr; " \
792 "sf erase $mbr_offset +$filesize; " \
793 "sf write $loadaddr $mbr_offset $filesize\0" \
794 "flashrecovery=tftp $recoveryaddr $cramfsfile; " \
795 "protect off $nor_recoveryaddr +$filesize; " \
796 "erase $nor_recoveryaddr +$filesize; " \
797 "cp.b $recoveryaddr $nor_recoveryaddr $filesize; " \
798 "protect on $nor_recoveryaddr +$filesize\0 " \
799 "flashuboot=tftp $ubootaddr $ubootfile; " \
800 "protect off $nor_ubootaddr +$filesize; " \
801 "erase $nor_ubootaddr +$filesize; " \
802 "cp.b $ubootaddr $nor_ubootaddr $filesize; " \
803 "protect on $nor_ubootaddr +$filesize\0 " \
804 "flashworking=tftp $workingaddr $cramfsfile; " \
805 "protect off $nor_workingaddr +$filesize; " \
806 "erase $nor_workingaddr +$filesize; " \
807 "cp.b $workingaddr $nor_workingaddr $filesize; " \
808 "protect on $nor_workingaddr +$filesize\0 " \
809 "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0 " \
810 "kerneladdr=0x01100000\0" \
811 "kernelfile=uImage\0" \
812 "loadaddr=0x01000000\0" \
813 "mbr=uCP1020.mbr\0" \
814 "mbr_offset=0x00000000\0" \
815 "netdev=eth0\0" \
816 "nor_recoveryaddr=0xEC0A0000\0" \
817 "nor_ubootaddr=0xEFF80000\0" \
818 "nor_workingaddr=0xECFA0000\0" \
819 "norbootrecovery=setenv bootargs $recoverybootargs" \
820 " console=$consoledev,$baudrate $othbootargs; " \
821 "run norloadrecovery; " \
822 "bootm $kerneladdr - $dtbaddr\0" \
823 "norbootworking=setenv bootargs $workingbootargs" \
824 " console=$consoledev,$baudrate $othbootargs; " \
825 "run norloadworking; " \
826 "bootm $kerneladdr - $dtbaddr\0" \
827 "norloadrecovery=mw.l $kerneladdr 0x0 0x00a00000; " \
828 "setenv cramfsaddr $nor_recoveryaddr; " \
829 "cramfsload $dtbaddr $dtbfile; " \
830 "cramfsload $kerneladdr $kernelfile\0" \
831 "norloadworking=mw.l $kerneladdr 0x0 0x00a00000; " \
832 "setenv cramfsaddr $nor_workingaddr; " \
833 "cramfsload $dtbaddr $dtbfile; " \
834 "cramfsload $kerneladdr $kernelfile\0" \
835 "othbootargs=quiet\0" \
836 "ramboot=setenv bootargs root=/dev/ram ramdisk_size=$ramdisk_size ro" \
837 " console=$consoledev,$baudrate $othbootargs; " \
838 "tftp $rootfsaddr $rootfsfile; " \
839 "tftp $loadaddr $kernelfile; " \
840 "tftp $dtbaddr $dtbfile; " \
841 "bootm $loadaddr $rootfsaddr $dtbaddr\0" \
842 "ramdisk_size=120000\0" \
843 "ramdiskfile=rootfs.ext2.gz.uboot\0" \
844 "recoveryaddr=0x02F00000\0" \
845 "recoverybootargs=root=/dev/mtdblock0 rootfstype=cramfs ro\0" \
846 "releasefpga=mw.l 0xffe0f000 0x00400000; mw.l 0xffe0f004 0x00000000; " \
847 "mw.l 0xffe0f008 0x00400000\0" \
848 "rootfsaddr=0x02F00000\0" \
849 "rootfsfile=rootfs.ext2.gz.uboot\0" \
850 "rootpath=/opt/nfsroot\0" \
851 "silent=1\0" \
852 "tftpflash=tftpboot $loadaddr $uboot; " \
853 "protect off " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
854 "erase " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
855 "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize; " \
856 "protect on " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
857 "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize\0"\
858 "uboot= " __stringify(CONFIG_UBOOTPATH) "\0" \
859 "ubootaddr=0x01000000\0" \
860 "ubootfile=u-boot.bin\0" \
861 "upgrade=run flashworking\0" \
862 "workingaddr=0x02F00000\0" \
863 "workingbootargs=root=/dev/mtdblock1 rootfstype=cramfs ro\0"
864
865 #else /* For Arcturus Modules */
866
867 #define CONFIG_BOOTDELAY 2 /* autoboot after 2 sec, -1 disables auto-boot */
868 #define CONFIG_EXTRA_ENV_SETTINGS \
869 "bootcmd=run norkernel\0" \
870 "bootfile=uImage\0" \
871 "consoledev=ttyS0\0" \
872 "dtbaddr=0x00c00000\0" \
873 "dtbfile=image.dtb\0" \
874 "ethaddr=" __stringify(CONFIG_ETHADDR) "\0" \
875 "eth1addr=" __stringify(CONFIG_ETH1ADDR) "\0" \
876 "eth2addr=" __stringify(CONFIG_ETH2ADDR) "\0" \
877 "fileaddr=0x01000000\0" \
878 "filesize=0x00080000\0" \
879 "flashmbr=sf probe 0; " \
880 "tftp $loadaddr $mbr; " \
881 "sf erase $mbr_offset +$filesize; " \
882 "sf write $loadaddr $mbr_offset $filesize\0" \
883 "flashuboot=tftp $loadaddr $ubootfile; " \
884 "protect off $nor_ubootaddr0 +$filesize; " \
885 "erase $nor_ubootaddr0 +$filesize; " \
886 "cp.b $loadaddr $nor_ubootaddr0 $filesize; " \
887 "protect on $nor_ubootaddr0 +$filesize; " \
888 "protect off $nor_ubootaddr1 +$filesize; " \
889 "erase $nor_ubootaddr1 +$filesize; " \
890 "cp.b $loadaddr $nor_ubootaddr1 $filesize; " \
891 "protect on $nor_ubootaddr1 +$filesize\0 " \
892 "format0=protect off $part0base +$part0size; " \
893 "erase $part0base +$part0size\0" \
894 "format1=protect off $part1base +$part1size; " \
895 "erase $part1base +$part1size\0" \
896 "format2=protect off $part2base +$part2size; " \
897 "erase $part2base +$part2size\0" \
898 "format3=protect off $part3base +$part3size; " \
899 "erase $part3base +$part3size\0" \
900 "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0 " \
901 "kerneladdr=0x01100000\0" \
902 "kernelargs=root=/dev/mtdblock1 rootfstype=cramfs ro\0" \
903 "kernelfile=uImage\0" \
904 "loadaddr=0x01000000\0" \
905 "mbr=uCP1020.mbr\0" \
906 "mbr_offset=0x00000000\0" \
907 "netdev=eth0\0" \
908 "nor_ubootaddr0=0xEC000000\0" \
909 "nor_ubootaddr1=0xEFF80000\0" \
910 "norkernel=setenv bootargs $kernelargs console=$consoledev,$baudrate; " \
911 "run norkernelload; " \
912 "bootm $kerneladdr - $dtbaddr\0" \
913 "norkernelload=mw.l $kerneladdr 0x0 0x00a00000; " \
914 "setenv cramfsaddr $part0base; " \
915 "cramfsload $dtbaddr $dtbfile; " \
916 "cramfsload $kerneladdr $kernelfile\0" \
917 "part0base=0xEC100000\0" \
918 "part0size=0x00700000\0" \
919 "part1base=0xEC800000\0" \
920 "part1size=0x02000000\0" \
921 "part2base=0xEE800000\0" \
922 "part2size=0x00800000\0" \
923 "part3base=0xEF000000\0" \
924 "part3size=0x00F80000\0" \
925 "partENVbase=0xEC080000\0" \
926 "partENVsize=0x00080000\0" \
927 "program0=tftp part0-000000.bin; " \
928 "protect off $part0base +$filesize; " \
929 "erase $part0base +$filesize; " \
930 "cp.b $loadaddr $part0base $filesize; " \
931 "echo Verifying...; " \
932 "cmp.b $loadaddr $part0base $filesize\0" \
933 "program1=tftp part1-000000.bin; " \
934 "protect off $part1base +$filesize; " \
935 "erase $part1base +$filesize; " \
936 "cp.b $loadaddr $part1base $filesize; " \
937 "echo Verifying...; " \
938 "cmp.b $loadaddr $part1base $filesize\0" \
939 "program2=tftp part2-000000.bin; " \
940 "protect off $part2base +$filesize; " \
941 "erase $part2base +$filesize; " \
942 "cp.b $loadaddr $part2base $filesize; " \
943 "echo Verifying...; " \
944 "cmp.b $loadaddr $part2base $filesize\0" \
945 "ramboot=setenv bootargs root=/dev/ram ramdisk_size=$ramdisk_size ro" \
946 " console=$consoledev,$baudrate $othbootargs; " \
947 "tftp $rootfsaddr $rootfsfile; " \
948 "tftp $loadaddr $kernelfile; " \
949 "tftp $dtbaddr $dtbfile; " \
950 "bootm $loadaddr $rootfsaddr $dtbaddr\0" \
951 "ramdisk_size=120000\0" \
952 "ramdiskfile=rootfs.ext2.gz.uboot\0" \
953 "releasefpga=mw.l 0xffe0f000 0x00400000; mw.l 0xffe0f004 0x00000000; " \
954 "mw.l 0xffe0f008 0x00400000\0" \
955 "rootfsaddr=0x02F00000\0" \
956 "rootfsfile=rootfs.ext2.gz.uboot\0" \
957 "rootpath=/opt/nfsroot\0" \
958 "spi__mbr=fatload mmc $mmcpart $loadaddr $mmbr; " \
959 "sf probe 0; sf erase 0 +$filesize; " \
960 "sf write $loadaddr 0 $filesize\0" \
961 "spi__boot=fatload mmc $mmcpart $loadaddr u-boot.bin; " \
962 "protect off 0xeC000000 +$filesize; " \
963 "erase 0xEC000000 +$filesize; " \
964 "cp.b $loadaddr 0xEC000000 $filesize; " \
965 "cmp.b $loadaddr 0xEC000000 $filesize; " \
966 "protect on 0xeC000000 +$filesize\0" \
967 "tftpflash=tftpboot $loadaddr $uboot; " \
968 "protect off " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
969 "erase " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
970 "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize; " \
971 "protect on " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
972 "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize\0"\
973 "uboot= " __stringify(CONFIG_UBOOTPATH) "\0" \
974 "ubootfile=u-boot.bin\0" \
975 "upgrade=run flashuboot\0" \
976 "usb_phy_type=ulpi\0 " \
977 "boot_nfs= " \
978 "setenv bootargs root=/dev/nfs rw " \
979 "nfsroot=$serverip:$rootpath " \
980 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
981 "console=$consoledev,$baudrate $othbootargs;" \
982 "tftp $loadaddr $bootfile;" \
983 "tftp $fdtaddr $fdtfile;" \
984 "bootm $loadaddr - $fdtaddr\0" \
985 "boot_hd = " \
986 "setenv bootargs root=/dev/$bdev rw rootdelay=30 " \
987 "console=$consoledev,$baudrate $othbootargs;" \
988 "usb start;" \
989 "ext2load usb 0:1 $loadaddr /boot/$bootfile;" \
990 "ext2load usb 0:1 $fdtaddr /boot/$fdtfile;" \
991 "bootm $loadaddr - $fdtaddr\0" \
992 "boot_usb_fat = " \
993 "setenv bootargs root=/dev/ram rw " \
994 "console=$consoledev,$baudrate $othbootargs " \
995 "ramdisk_size=$ramdisk_size;" \
996 "usb start;" \
997 "fatload usb 0:2 $loadaddr $bootfile;" \
998 "fatload usb 0:2 $fdtaddr $fdtfile;" \
999 "fatload usb 0:2 $ramdiskaddr $ramdiskfile;" \
1000 "bootm $loadaddr $ramdiskaddr $fdtaddr\0 " \
1001 "boot_usb_ext2 = " \
1002 "setenv bootargs root=/dev/ram rw " \
1003 "console=$consoledev,$baudrate $othbootargs " \
1004 "ramdisk_size=$ramdisk_size;" \
1005 "usb start;" \
1006 "ext2load usb 0:4 $loadaddr $bootfile;" \
1007 "ext2load usb 0:4 $fdtaddr $fdtfile;" \
1008 "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \
1009 "bootm $loadaddr $ramdiskaddr $fdtaddr\0 " \
1010 "boot_nor = " \
1011 "setenv bootargs root=/dev/$jffs2nor rw " \
1012 "console=$consoledev,$baudrate rootfstype=jffs2 $othbootargs;" \
1013 "bootm $norbootaddr - $norfdtaddr\0 " \
1014 "boot_ram = " \
1015 "setenv bootargs root=/dev/ram rw " \
1016 "console=$consoledev,$baudrate $othbootargs " \
1017 "ramdisk_size=$ramdisk_size;" \
1018 "tftp $ramdiskaddr $ramdiskfile;" \
1019 "tftp $loadaddr $bootfile;" \
1020 "tftp $fdtaddr $fdtfile;" \
1021 "bootm $loadaddr $ramdiskaddr $fdtaddr\0"
1022
1023 #endif
1024 #endif
1025
1026 #endif /* __CONFIG_H */
"Das U-Boot" Source Tree