include/configs/a3m071.h

   1 /*
   2  * Copyright 2012-2013 Stefan Roese <sr@denx.de>
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 /*
  11  * High Level Configuration Options
  12  * (easy to change)
  13  */
  14
  15 #define CONFIG_MPC5200
  16 #define CONFIG_A3M071                   /* A3M071 board */
  17 #define CONFIG_DISPLAY_BOARDINFO
  18 #define CONFIG_SYS_GENERIC_BOARD
  19
  20 #define CONFIG_SYS_TEXT_BASE    0x01000000      /* boot low for 32 MiB boards */
  21
  22 #define CONFIG_SPL_TARGET       "u-boot-img.bin"
  23
  24 #define CONFIG_SYS_MPC5XXX_CLKIN        33000000 /* ... running at 33MHz */
  25
  26 #define CONFIG_MISC_INIT_R
  27 #define CONFIG_SYS_LOWBOOT              /* Enable lowboot       */
  28
  29 #ifdef CONFIG_A4M2K
  30 #define CONFIG_HOSTNAME         a4m2k
  31 #else
  32 #define CONFIG_HOSTNAME         a3m071
  33 #endif
  34
  35 #define CONFIG_BOOTCOUNT_LIMIT
  36
  37 /*
  38  * Serial console configuration
  39  */
  40 #define CONFIG_PSC_CONSOLE      1           /* console is on PSC1 */
  41 #define CONFIG_BAUDRATE         115200  /* ... at 115200 bps */
  42 #define CONFIG_SYS_BAUDRATE_TABLE               \
  43         { 9600, 19200, 38400, 57600, 115200, 230400 }
  44
  45 /*
  46  * Command line configuration.
  47  */
  48 #include <config_cmd_default.h>
  49
  50 #define CONFIG_CMD_BSP
  51 #define CONFIG_CMD_CACHE
  52 #define CONFIG_CMD_MII
  53 #define CONFIG_CMD_REGINFO
  54 #define CONFIG_CMD_DHCP
  55 #define CONFIG_BOOTP_SEND_HOSTNAME
  56 #define CONFIG_BOOTP_SERVERIP
  57 #define CONFIG_BOOTP_MAY_FAIL
  58 #define CONFIG_BOOTP_BOOTPATH
  59 #define CONFIG_BOOTP_GATEWAY
  60 #define CONFIG_BOOTP_SERVERIP
  61 #define CONFIG_NET_RETRY_COUNT 3
  62 #define CONFIG_CMD_LINK_LOCAL
  63 #define CONFIG_LIB_RAND
  64 #define CONFIG_NETCONSOLE
  65 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
  66 #define CONFIG_CMD_PING
  67 #define CONFIG_MTD_DEVICE       /* needed for mtdparts commands */
  68 #define CONFIG_MTD_PARTITIONS   /* needed for UBI */
  69 #define CONFIG_FLASH_CFI_MTD
  70 #define MTDIDS_DEFAULT          "nor0=fc000000.flash"
  71 #define MTDPARTS_DEFAULT        "mtdparts=fc000000.flash:512k(u-boot)," \
  72                                                 "128k(env1),"   \
  73                                                 "128k(env2),"   \
  74                                                 "128k(hwinfo)," \
  75                                                 "1M(nvramsim)," \
  76                                                 "128k(dtb),"    \
  77                                                 "5M(kernel),"   \
  78                                                 "128k(sysinfo),"        \
  79                                                 "7552k(root),"  \
  80                                                 "4M(app),"      \
  81                                                 "5376k(data),"  \
  82                                                 "8M(install)"
  83
  84 #define CONFIG_LZO                      /* needed for UBI */
  85 #define CONFIG_RBTREE                   /* needed for UBI */
  86 #define CONFIG_CMD_MTDPARTS
  87 #define CONFIG_CMD_UBI
  88 #define CONFIG_CMD_UBIFS
  89 #define CONFIG_FIT
  90
  91 /*
  92  * IPB Bus clocking configuration.
  93  */
  94 #define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK         /* define for 133MHz speed */
  95 /* define for 66MHz speed - undef for 33MHz PCI clock speed */
  96 #ifdef CONFIG_A4M2K
  97 #define CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2
  98 #else
  99 #undef CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2
 100 #endif
 101
 102 /* pass open firmware flat tree */
 103 #define CONFIG_OF_LIBFDT
 104 #define CONFIG_OF_BOARD_SETUP
 105
 106 /* maximum size of the flat tree (8K) */
 107 #define OF_FLAT_TREE_MAX_SIZE   8192
 108
 109 #define OF_CPU                  "PowerPC,5200@0"
 110 #define OF_SOC                  "soc5200@f0000000"
 111 #define OF_TBCLK                (bd->bi_busfreq / 4)
 112 #define OF_STDOUT_PATH          "/soc5200@f0000000/serial@2000"
 113
 114 /*
 115  * NOR flash configuration
 116  */
 117 #define CONFIG_SYS_FLASH_BASE           0xfc000000
 118 #define CONFIG_SYS_FLASH_SIZE           0x02000000
 119 #define CONFIG_ENV_ADDR                 (CONFIG_SYS_FLASH_BASE + 0x80000)
 120
 121 #define CONFIG_SYS_MAX_FLASH_BANKS      1
 122 #define CONFIG_SYS_MAX_FLASH_SECT       256
 123 #define CONFIG_SYS_FLASH_ERASE_TOUT     240000
 124 #define CONFIG_SYS_FLASH_WRITE_TOUT     500
 125 #define CONFIG_SYS_FLASH_LOCK_TOUT      5
 126 #define CONFIG_SYS_FLASH_UNLOCK_TOUT    10000
 127 #define CONFIG_SYS_FLASH_PROTECTION
 128 #define CONFIG_FLASH_CFI_DRIVER
 129 #define CONFIG_SYS_FLASH_CFI
 130 #define CONFIG_SYS_FLASH_EMPTY_INFO
 131 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 132 #define CONFIG_FLASH_VERIFY
 133
 134 /*
 135  * Environment settings
 136  */
 137 #define CONFIG_ENV_IS_IN_FLASH
 138 #define CONFIG_ENV_SIZE         0x10000
 139 #define CONFIG_ENV_SECT_SIZE    0x20000
 140 #define CONFIG_ENV_OVERWRITE
 141 #define CONFIG_ENV_ADDR_REDUND  (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
 142 #define CONFIG_ENV_SIZE_REDUND  (CONFIG_ENV_SIZE)
 143
 144 /*
 145  * Memory map
 146  */
 147 #define CONFIG_SYS_MBAR                 0xf0000000
 148 #define CONFIG_SYS_SDRAM_BASE           0x00000000
 149 #define CONFIG_SYS_DEFAULT_MBAR         0x80000000
 150
 151 /* Use SRAM until RAM will be available */
 152 #define CONFIG_SYS_INIT_RAM_ADDR        MPC5XXX_SRAM
 153 #define CONFIG_SYS_INIT_RAM_END         MPC5XXX_SRAM_SIZE
 154
 155 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_END - \
 156                                          GENERATED_GBL_DATA_SIZE)
 157 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 158
 159 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 160
 161 #define CONFIG_SYS_MONITOR_LEN          (512 << 10)
 162 #define CONFIG_SYS_MALLOC_LEN           (4 << 20)
 163 #define CONFIG_SYS_BOOTMAPSZ            (8 << 20)
 164
 165 /*
 166  * Ethernet configuration
 167  */
 168 #define CONFIG_MPC5xxx_FEC
 169 #define CONFIG_MPC5xxx_FEC_MII100
 170 #ifdef CONFIG_A4M2K
 171 #define CONFIG_PHY_ADDR                 0x01
 172 #else
 173 #define CONFIG_PHY_ADDR                 0x00
 174 #endif
 175
 176 /*
 177  * GPIO configuration
 178  */
 179
 180 /*
 181  * GPIO-config depends on failsave-level
 182  * failsave 0 means just MPX-config, no digiboard, no fpga
 183  *          1 means digiboard ok
 184  *          2 means fpga ok
 185  */
 186
 187 #ifdef CONFIG_A4M2K
 188 #define CONFIG_SYS_GPS_PORT_CONFIG      0x1005C805
 189 #else
 190 /* for failsave-level 0 - full failsave */
 191 #define CONFIG_SYS_GPS_PORT_CONFIG      0x1005C005
 192 /* for failsave-level 1 - only digiboard ok */
 193 #define CONFIG_SYS_GPS_PORT_CONFIG_1    0x1005C065
 194 /* for failsave-level 2 - all ok */
 195 #define CONFIG_SYS_GPS_PORT_CONFIG_2    0x1005C065
 196 #endif
 197
 198 #define CONFIG_WDOG_GPIO_PIN            GPIO_WKUP_7
 199 #if defined(CONFIG_A4M2K) && !defined(CONFIG_SPL_BUILD)
 200 #define CONFIG_HW_WATCHDOG              /* Use external HW-Watchdog     */
 201 #endif
 202
 203 /*
 204  * Configuration matrix
 205  *                        MSB                            LSB
 206  * failsave 0  0x1005C005  00010000000001011100000000000101  ( full failsave )
 207  * failsave 1  0x1005C065  00010000000001011100000001100101  ( digib.-ver ok )
 208  * failsave 2  0x1005C065  00010000000001011100000001100101  ( all ok )
 209  *                         || ||| ||  |   ||| |   |   |   |
 210  *                         || ||| ||  |   ||| |   |   |   |  bit rev name
 211  *                         ++-+++-++--+---+++-+---+---+---+-  0   31 CS1
 212  *                          +-+++-++--+---+++-+---+---+---+-  1   30 LPTZ
 213  *                            ||| ||  |   ||| |   |   |   |   2   29 ALTs
 214  *                            +++-++--+---+++-+---+---+---+-  3   28 ALTs
 215  *                             ++-++--+---+++-+---+---+---+-  4   27 CS7
 216  *                              +-++--+---+++-+---+---+---+-  5   26 CS6
 217  *                                ||  |   ||| |   |   |   |   6   25 ATA
 218  *                                ++--+---+++-+---+---+---+-  7   24 ATA
 219  *                                 +--+---+++-+---+---+---+-  8   23 IR_USB_CLK
 220  *                                    |   ||| |   |   |   |   9   22 IRDA
 221  *                                    |   ||| |   |   |   |  10   21 IRDA
 222  *                                    +---+++-+---+---+---+- 11   20 IRDA
 223  *                                        ||| |   |   |   |  12   19 Ether
 224  *                                        ||| |   |   |   |  13   18 Ether
 225  *                                        ||| |   |   |   |  14   17 Ether
 226  *                                        +++-+---+---+---+- 15   16 Ether
 227  *                                         ++-+---+---+---+- 16   15 PCI_DIS
 228  *                                          +-+---+---+---+- 17   14 USB_SE
 229  *                                            |   |   |   |  18   13 USB
 230  *                                            +---+---+---+- 19   12 USB
 231  *                                                |   |   |  20   11 PSC3
 232  *                                                |   |   |  21   10 PSC3
 233  *                                                |   |   |  22    9 PSC3
 234  *                                                +---+---+- 23    8 PSC3
 235  *                                                    |   |  24    7 -
 236  *                                                    |   |  25    6 PSC2
 237  *                                                    |   |  26    5 PSC2
 238  *                                                    +---+- 27    4 PSC2
 239  *                                                        |  28    3 -
 240  *                                                        |  29    2 PSC1
 241  *                                                        |  30    1 PSC1
 242  *                                                        +- 31    0 PSC1
 243  */
 244
 245
 246 /*
 247  * Miscellaneous configurable options
 248  */
 249 #define CONFIG_SYS_LONGHELP
 250
 251 #define CONFIG_CMDLINE_EDITING
 252 #define CONFIG_SYS_HUSH_PARSER
 253 #define CONFIG_SYS_PROMPT_HUSH_PS2      "> "
 254
 255 #if defined(CONFIG_CMD_KGDB)
 256 #define CONFIG_SYS_CBSIZE               1024
 257 #else
 258 #define CONFIG_SYS_CBSIZE               256
 259 #endif
 260 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 261 #define CONFIG_SYS_MAXARGS              16
 262 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 263
 264 #define CONFIG_SYS_MEMTEST_START        0x00100000
 265 #define CONFIG_SYS_MEMTEST_END          0x00f00000
 266
 267 #define CONFIG_SYS_LOAD_ADDR            0x00100000
 268
 269 #define CONFIG_LOOPW
 270 #define CONFIG_SYS_CONSOLE_INFO_QUIET   /* don't print console @ startup*/
 271
 272 /*
 273  * Various low-level settings
 274  */
 275 #define CONFIG_SYS_HID0_INIT            (HID0_ICE | HID0_ICFI)
 276 #define CONFIG_SYS_HID0_FINAL           HID0_ICE
 277
 278 #define CONFIG_SYS_BOOTCS_START         CONFIG_SYS_FLASH_BASE
 279 #define CONFIG_SYS_BOOTCS_SIZE          CONFIG_SYS_FLASH_SIZE
 280 #define CONFIG_SYS_CS0_START            CONFIG_SYS_FLASH_BASE
 281 #define CONFIG_SYS_CS0_SIZE             CONFIG_SYS_FLASH_SIZE
 282
 283 #ifdef CONFIG_A4M2K
 284 /* external MRAM */
 285 #define CONFIG_SYS_CS1_START            0xf1000000
 286 #define CONFIG_SYS_CS1_SIZE             (512 << 10)     /* 512KiB MRAM */
 287 #endif
 288
 289 #define CONFIG_SYS_CS2_START            0xe0000000
 290 #define CONFIG_SYS_CS2_SIZE             0x00100000
 291
 292 /* FPGA slave io (512kiB / 1MiB) - see ticket #66 */
 293 #define CONFIG_SYS_CS3_START            0xE9000000
 294 #ifdef CONFIG_A4M2K
 295 #define CONFIG_SYS_CS3_SIZE             0x00100000
 296 #else
 297 #define CONFIG_SYS_CS3_SIZE             0x00080000
 298 #endif
 299 /* 00000000 00110010 1 0 1 1 10 01 00 00 0 0 0 0  = 0x0032B900 */
 300 #define CONFIG_SYS_CS3_CFG              0x0032B900
 301
 302 #ifndef CONFIG_A4M2K
 303 /* Diagnosis Interface - see ticket #63 */
 304 #define CONFIG_SYS_CS4_START            0xEA000000
 305 #define CONFIG_SYS_CS4_SIZE             0x00000001
 306 /* 00000000 00000010 1 0 1 1 10 01 00 00 0 0 0 0  = 0x0002B900 */
 307 #define CONFIG_SYS_CS4_CFG              0x0002B900
 308 #endif
 309
 310 /* FPGA master io (64kiB / 1MiB) - see ticket #66 */
 311 #define CONFIG_SYS_CS5_START            0xE8000000
 312 #ifdef CONFIG_A4M2K
 313 #define CONFIG_SYS_CS5_SIZE             0x00100000
 314 #else
 315 #define CONFIG_SYS_CS5_SIZE             0x00010000
 316 #endif
 317 /* 00000000 00110010 1 0 1 1 10 01 00 00 0 0 0 0  = 0x0032B900 */
 318 #define CONFIG_SYS_CS5_CFG              0x0032B900
 319
 320 #ifdef CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2     /* for pci_clk  = 66 MHz */
 321 #define CONFIG_SYS_BOOTCS_CFG           0x0006F900
 322 #define CONFIG_SYS_CS1_CFG              0x0008FD00
 323 #define CONFIG_SYS_CS2_CFG              0x0006F90C
 324 #else   /* for pci_clk = 33 MHz */
 325 #define CONFIG_SYS_BOOTCS_CFG           0x0002F900
 326 #define CONFIG_SYS_CS1_CFG              0x0001FB00
 327 #define CONFIG_SYS_CS2_CFG              0x0002F90C
 328 #endif
 329
 330 #define CONFIG_SYS_CS_BURST             0x00000000
 331 /* set DC for FPGA CS5 and CS3 to 0 - see ticket #66 */
 332 /* R  7  R  6  R  5  R  4  R  3  R  2  R  1  R  0  */
 333 /* 00 11 00 11 00 00 00 11 00 00 00 00 00 00 00 00 */
 334 #define CONFIG_SYS_CS_DEADCYCLE         0x33030000
 335
 336 #define CONFIG_SYS_RESET_ADDRESS        0xff000000
 337
 338 /*
 339  * Environment Configuration
 340  */
 341
 342 #define CONFIG_BOOTDELAY        3       /* -1 disables auto-boot */
 343 #undef  CONFIG_BOOTARGS
 344 #define CONFIG_ZERO_BOOTDELAY_CHECK
 345
 346 #define CONFIG_SYS_AUTOLOAD     "n"
 347
 348 #define CONFIG_PREBOOT  "echo;" \
 349         "echo Type \"run flash_mtd\" to boot from flash with mtd filesystem;" \
 350         "echo Type \"run net_nfs\" to boot from tftp with nfs filesystem;" \
 351         "echo"
 352
 353 #undef  CONFIG_BOOTARGS
 354
 355 #define CONFIG_SYS_OS_BASE      0xfc200000
 356 #define CONFIG_SYS_FDT_BASE     0xfc1e0000
 357
 358 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 359         "netdev=eth0\0"                                                 \
 360         "verify=no\0"                                                   \
 361         "loadaddr=200000\0"                                             \
 362         "kernel_addr=" __stringify(CONFIG_SYS_OS_BASE) "\0"             \
 363         "kernel_addr_r=1000000\0"                                       \
 364         "fdt_addr=" __stringify(CONFIG_SYS_FDT_BASE) "\0"               \
 365         "fdt_addr_r=1800000\0"                                          \
 366         "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0"            \
 367         "fdtfile=" __stringify(CONFIG_HOSTNAME) "/"                     \
 368                 __stringify(CONFIG_HOSTNAME) ".dtb\0"                   \
 369         "rootpath=/opt/eldk-5.2.1/powerpc/"                             \
 370                 "core-image-minimal-mtdutils-dropbear-generic\0"        \
 371         "consoledev=ttyPSC0\0"                                          \
 372         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
 373                 "nfsroot=${serverip}:${rootpath}\0"                     \
 374         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
 375         "mtdargs=setenv bootargs root=/dev/mtdblock8 "                  \
 376                 "rootfstype=squashfs,jffs2\0"                           \
 377         "addhost=setenv bootargs ${bootargs} "                          \
 378                 "hostname=${hostname}\0"                                \
 379         "addip=setenv bootargs ${bootargs} "                            \
 380                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
 381                 ":${hostname}:${netdev}:off panic=1\0"                  \
 382         "addtty=setenv bootargs ${bootargs} "                           \
 383                 "console=${consoledev},${baudrate}\0"                   \
 384         "flash_nfs=run nfsargs addip addtty addmtd addhost;"            \
 385                 "bootm ${kernel_addr} - ${fdt_addr}\0"                  \
 386         "flash_mtd=run mtdargs addip addtty addmtd addhost;"            \
 387                 "bootm ${kernel_addr} - ${fdt_addr}\0"                  \
 388         "flash_self=run ramargs addip addtty addmtd addhost;"           \
 389                 "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0"    \
 390         "net_nfs=tftp ${kernel_addr_r} ${bootfile};"                    \
 391                 "tftp ${fdt_addr_r} ${fdtfile};"                        \
 392                 "run nfsargs addip addtty addmtd addhost;"              \
 393                 "bootm ${kernel_addr_r} - ${fdt_addr_r}\0"              \
 394         "load=tftp ${loadaddr} " __stringify(CONFIG_HOSTNAME)           \
 395                 "/u-boot-img.bin\0"                                     \
 396         "update=protect off fc000000 fc07ffff;"                         \
 397                 "era fc000000 fc07ffff;"                                \
 398                 "cp.b ${loadaddr} fc000000 ${filesize}\0"               \
 399         "upd=run load;run update\0"                                     \
 400         "upd_fdt=tftp 1800000 a3m071/a3m071.dtb;"                       \
 401                 "run mtdargs addip addtty addmtd addhost;"              \
 402                 "fdt addr 1800000;fdt boardsetup;fdt chosen;"           \
 403                 "erase fc1e0000 fc1fffff;cp.b 1800000 fc1e0000 20000"   \
 404         "upd_kernel=tftp 1000000 a3m071/uImage-uncompressed;"           \
 405                 "erase fc200000 fc6fffff;"                              \
 406                 "cp.b 1000000 fc200000 ${filesize}"                     \
 407         "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"              \
 408         "mtdids=" MTDIDS_DEFAULT "\0"                                   \
 409         "mtdparts=" MTDPARTS_DEFAULT "\0"                               \
 410         ""
 411
 412 #define CONFIG_BOOTCOMMAND      "run flash_mtd"
 413
 414 /*
 415  * SPL related defines
 416  */
 417 #define CONFIG_SPL_FRAMEWORK
 418 #define CONFIG_SPL_BOARD_INIT
 419 #define CONFIG_SPL_NOR_SUPPORT
 420 #define CONFIG_SPL_TEXT_BASE    0xfc000000
 421 #define CONFIG_SPL_START_S_PATH "arch/powerpc/cpu/mpc5xxx"
 422 #define CONFIG_SPL_LDSCRIPT     "arch/powerpc/cpu/mpc5xxx/u-boot-spl.lds"
 423 #define CONFIG_SPL_LIBCOMMON_SUPPORT    /* image.c */
 424 #define CONFIG_SPL_LIBGENERIC_SUPPORT   /* string.c */
 425 #define CONFIG_SPL_SERIAL_SUPPORT
 426
 427 /* Place BSS for SPL near end of SDRAM */
 428 #define CONFIG_SPL_BSS_START_ADDR       ((128 - 1) << 20)
 429 #define CONFIG_SPL_BSS_MAX_SIZE         (64 << 10)
 430
 431 #define CONFIG_SPL_OS_BOOT
 432 #define CONFIG_SPL_ENV_SUPPORT
 433 /* Place patched DT blob (fdt) at this address */
 434 #define CONFIG_SYS_SPL_ARGS_ADDR        0x01800000
 435
 436 /* Settings for real U-Boot to be loaded from NOR flash */
 437 #ifndef __ASSEMBLY__
 438 extern char __spl_flash_end[];
 439 #endif
 440 #define CONFIG_SYS_UBOOT_BASE           __spl_flash_end
 441 #define CONFIG_SYS_SPL_MAX_LEN          (32 << 10)
 442 #define CONFIG_SYS_UBOOT_START          0x1000100
 443
 444 #endif /* __CONFIG_H */