include/configs/adp-ag101p.h

   1 /*
   2  * Copyright (C) 2011 Andes Technology Corporation
   3  * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
   4  * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 #include <asm/arch/ag101.h>
  13
  14 /*
  15  * CPU and Board Configuration Options
  16  */
  17 #define CONFIG_ADP_AG101P
  18
  19 #define CONFIG_USE_INTERRUPT
  20
  21 #define CONFIG_SKIP_LOWLEVEL_INIT
  22
  23 /*
  24  * Definitions related to passing arguments to kernel.
  25  */
  26 #define CONFIG_CMDLINE_TAG                      /* send commandline to Kernel */
  27 #define CONFIG_SETUP_MEMORY_TAGS        /* send memory definition to kernel */
  28 #define CONFIG_INITRD_TAG                       /* send initrd params */
  29
  30 #ifndef CONFIG_SKIP_LOWLEVEL_INIT
  31 #define CONFIG_MEM_REMAP
  32 #endif
  33
  34 #ifdef CONFIG_SKIP_LOWLEVEL_INIT
  35 #define CONFIG_SYS_TEXT_BASE    0x03200000
  36 #else
  37 #define CONFIG_SYS_TEXT_BASE    0x00000000
  38 #endif
  39
  40 /*
  41  * Timer
  42  */
  43
  44 /*
  45  * According to the discussion in u-boot mailing list before,
  46  * CONFIG_SYS_HZ at 1000 is mandatory.
  47  */
  48 #define CONFIG_SYS_HZ           1000
  49 #define CONFIG_SYS_CLK_FREQ     39062500
  50 #define VERSION_CLOCK           CONFIG_SYS_CLK_FREQ
  51
  52 /*
  53  * Use Externel CLOCK or PCLK
  54  */
  55 #undef CONFIG_FTRTC010_EXTCLK
  56
  57 #ifndef CONFIG_FTRTC010_EXTCLK
  58 #define CONFIG_FTRTC010_PCLK
  59 #endif
  60
  61 #ifdef CONFIG_FTRTC010_EXTCLK
  62 #define TIMER_CLOCK     32768                   /* CONFIG_FTRTC010_EXTCLK */
  63 #else
  64 #define TIMER_CLOCK     CONFIG_SYS_HZ           /* CONFIG_FTRTC010_PCLK */
  65 #endif
  66
  67 #define TIMER_LOAD_VAL  0xffffffff
  68
  69 /*
  70  * Real Time Clock
  71  */
  72 #define CONFIG_RTC_FTRTC010
  73
  74 /*
  75  * Real Time Clock Divider
  76  * RTC_DIV_COUNT                        (OSC_CLK/OSC_5MHZ)
  77  */
  78 #define OSC_5MHZ                        (5*1000000)
  79 #define OSC_CLK                         (4*OSC_5MHZ)
  80 #define RTC_DIV_COUNT                   (0.5)   /* Why?? */
  81
  82 /*
  83  * Serial console configuration
  84  */
  85
  86 /* FTUART is a high speed NS 16C550A compatible UART, addr: 0x99600000 */
  87 #define CONFIG_BAUDRATE                 38400
  88 #define CONFIG_CONS_INDEX               1
  89 #define CONFIG_SYS_NS16550
  90 #define CONFIG_SYS_NS16550_SERIAL
  91 #define CONFIG_SYS_NS16550_COM1         CONFIG_FTUART010_02_BASE
  92 #define CONFIG_SYS_NS16550_REG_SIZE     -4
  93 #define CONFIG_SYS_NS16550_CLK          ((18432000 * 20) / 25)  /* AG101P */
  94
  95 /*
  96  * Ethernet
  97  */
  98 #define CONFIG_FTMAC100
  99
 100 #define CONFIG_BOOTDELAY        3
 101
 102 /*
 103  * SD (MMC) controller
 104  */
 105 #define CONFIG_MMC
 106 #define CONFIG_CMD_MMC
 107 #define CONFIG_GENERIC_MMC
 108 #define CONFIG_DOS_PARTITION
 109 #define CONFIG_FTSDC010
 110 #define CONFIG_FTSDC010_NUMBER          1
 111 #define CONFIG_FTSDC010_SDIO
 112 #define CONFIG_CMD_FAT
 113 #define CONFIG_CMD_EXT2
 114
 115 /*
 116  * Command line configuration.
 117  */
 118 #include <config_cmd_default.h>
 119
 120 #define CONFIG_CMD_CACHE
 121 #define CONFIG_CMD_DATE
 122 #define CONFIG_CMD_PING
 123
 124 /*
 125  * Miscellaneous configurable options
 126  */
 127 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 128 #define CONFIG_SYS_PROMPT       "NDS32 # "      /* Monitor Command Prompt */
 129 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 130
 131 /* Print Buffer Size */
 132 #define CONFIG_SYS_PBSIZE       \
 133         (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 134
 135 /* max number of command args */
 136 #define CONFIG_SYS_MAXARGS      16
 137
 138 /* Boot Argument Buffer Size */
 139 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
 140
 141 /*
 142  * Size of malloc() pool
 143  */
 144 /* 512kB is suggested, (CONFIG_ENV_SIZE + 128 * 1024) was not enough */
 145 #define CONFIG_SYS_MALLOC_LEN           (512 << 10)
 146
 147 /*
 148  * size in bytes reserved for initial data
 149  */
 150 #define CONFIG_SYS_GBL_DATA_SIZE        128
 151
 152 /*
 153  * AHB Controller configuration
 154  */
 155 #define CONFIG_FTAHBC020S
 156
 157 #ifdef CONFIG_FTAHBC020S
 158 #include <faraday/ftahbc020s.h>
 159
 160 /* Address of PHYS_SDRAM_0 before memory remap is at 0x(100)00000 */
 161 #define CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE    0x100
 162
 163 /*
 164  * CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6: this define is used in lowlevel_init.S,
 165  * hence we cannot use FTAHBC020S_BSR_SIZE(2048) since it will use ffs() wrote
 166  * in C language.
 167  */
 168 #define CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6 \
 169         (FTAHBC020S_SLAVE_BSR_BASE(CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE) | \
 170                                         FTAHBC020S_SLAVE_BSR_SIZE(0xb))
 171 #endif
 172
 173 /*
 174  * Watchdog
 175  */
 176 #define CONFIG_FTWDT010_WATCHDOG
 177
 178 /*
 179  * PMU Power controller configuration
 180  */
 181 #define CONFIG_PMU
 182 #define CONFIG_FTPMU010_POWER
 183
 184 #ifdef CONFIG_FTPMU010_POWER
 185 #include <faraday/ftpmu010.h>
 186 #define CONFIG_SYS_FTPMU010_PDLLCR0_HCLKOUTDIS          0x0E
 187 #define CONFIG_SYS_FTPMU010_SDRAMHTC    (FTPMU010_SDRAMHTC_EBICTRL_DCSR  | \
 188                                          FTPMU010_SDRAMHTC_EBIDATA_DCSR  | \
 189                                          FTPMU010_SDRAMHTC_SDRAMCS_DCSR  | \
 190                                          FTPMU010_SDRAMHTC_SDRAMCTL_DCSR | \
 191                                          FTPMU010_SDRAMHTC_CKE_DCSR      | \
 192                                          FTPMU010_SDRAMHTC_DQM_DCSR      | \
 193                                          FTPMU010_SDRAMHTC_SDCLK_DCSR)
 194 #endif
 195
 196 /*
 197  * SDRAM controller configuration
 198  */
 199 #define CONFIG_FTSDMC021
 200
 201 #ifdef CONFIG_FTSDMC021
 202 #include <faraday/ftsdmc021.h>
 203
 204 #define CONFIG_SYS_FTSDMC021_TP1        (FTSDMC021_TP1_TRAS(2)  |       \
 205                                          FTSDMC021_TP1_TRP(1)   |       \
 206                                          FTSDMC021_TP1_TRCD(1)  |       \
 207                                          FTSDMC021_TP1_TRF(3)   |       \
 208                                          FTSDMC021_TP1_TWR(1)   |       \
 209                                          FTSDMC021_TP1_TCL(2))
 210
 211 #define CONFIG_SYS_FTSDMC021_TP2        (FTSDMC021_TP2_INI_PREC(4) |    \
 212                                          FTSDMC021_TP2_INI_REFT(8) |    \
 213                                          FTSDMC021_TP2_REF_INTV(0x180))
 214
 215 /*
 216  * CONFIG_SYS_FTSDMC021_CR1: this define is used in lowlevel_init.S,
 217  * hence we cannot use FTSDMC021_BANK_SIZE(64) since it will use ffs() wrote in
 218  * C language.
 219  */
 220 #define CONFIG_SYS_FTSDMC021_CR1        (FTSDMC021_CR1_DDW(2)    |      \
 221                                          FTSDMC021_CR1_DSZ(3)    |      \
 222                                          FTSDMC021_CR1_MBW(2)    |      \
 223                                          FTSDMC021_CR1_BNKSIZE(6))
 224
 225 #define CONFIG_SYS_FTSDMC021_CR2        (FTSDMC021_CR2_IPREC     |      \
 226                                          FTSDMC021_CR2_IREF      |      \
 227                                          FTSDMC021_CR2_ISMR)
 228
 229 #define CONFIG_SYS_FTSDMC021_BANK0_BASE CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE
 230 #define CONFIG_SYS_FTSDMC021_BANK0_BSR  (FTSDMC021_BANK_ENABLE   |      \
 231                                          CONFIG_SYS_FTSDMC021_BANK0_BASE)
 232
 233 #define CONFIG_SYS_FTSDMC021_BANK1_BASE \
 234         (CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE + (PHYS_SDRAM_0_SIZE >> 20))
 235 #define CONFIG_SYS_FTSDMC021_BANK1_BSR  (FTSDMC021_BANK_ENABLE   |      \
 236                                          CONFIG_SYS_FTSDMC021_BANK1_BASE)
 237 #endif
 238
 239 /*
 240  * Physical Memory Map
 241  */
 242 #if defined(CONFIG_MEM_REMAP) || defined(CONFIG_SKIP_LOWLEVEL_INIT)
 243 #define PHYS_SDRAM_0            0x00000000      /* SDRAM Bank #1 */
 244 #if defined(CONFIG_MEM_REMAP)
 245 #define PHYS_SDRAM_0_AT_INIT    0x10000000      /* SDRAM Bank #1 before remap*/
 246 #endif
 247 #else   /* !CONFIG_SKIP_LOWLEVEL_INIT && !CONFIG_MEM_REMAP */
 248 #define PHYS_SDRAM_0            0x10000000      /* SDRAM Bank #1 */
 249 #endif
 250 #define PHYS_SDRAM_1 \
 251         (PHYS_SDRAM_0 + PHYS_SDRAM_0_SIZE)      /* SDRAM Bank #2 */
 252
 253 #define CONFIG_NR_DRAM_BANKS    2               /* we have 2 bank of DRAM */
 254 #define PHYS_SDRAM_0_SIZE       0x04000000      /* 64 MB */
 255 #define PHYS_SDRAM_1_SIZE       0x04000000      /* 64 MB */
 256
 257 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_0
 258
 259 #ifdef CONFIG_MEM_REMAP
 260 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0xA0000 - \
 261                                         GENERATED_GBL_DATA_SIZE)
 262 #else
 263 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x1000 - \
 264                                         GENERATED_GBL_DATA_SIZE)
 265 #endif /* CONFIG_MEM_REMAP */
 266
 267 /*
 268  * Load address and memory test area should agree with
 269  * arch/nds32/config.mk. Be careful not to overwrite U-boot itself.
 270  */
 271 #define CONFIG_SYS_LOAD_ADDR            0x300000
 272
 273 /* memtest works on 63 MB in DRAM */
 274 #define CONFIG_SYS_MEMTEST_START        PHYS_SDRAM_0
 275 #define CONFIG_SYS_MEMTEST_END          (PHYS_SDRAM_0 + 0x03F00000)
 276
 277 /*
 278  * Static memory controller configuration
 279  */
 280 #define CONFIG_FTSMC020
 281
 282 #ifdef CONFIG_FTSMC020
 283 #include <faraday/ftsmc020.h>
 284
 285 #define CONFIG_SYS_FTSMC020_CONFIGS     {                       \
 286         { FTSMC020_BANK0_CONFIG, FTSMC020_BANK0_TIMING, },      \
 287         { FTSMC020_BANK1_CONFIG, FTSMC020_BANK1_TIMING, },      \
 288 }
 289
 290 #ifndef CONFIG_SKIP_LOWLEVEL_INIT       /* FLASH is on BANK 0 */
 291 #define FTSMC020_BANK0_LOWLV_CONFIG     (FTSMC020_BANK_ENABLE   |       \
 292                                          FTSMC020_BANK_SIZE_32M |       \
 293                                          FTSMC020_BANK_MBW_32)
 294
 295 #define FTSMC020_BANK0_LOWLV_TIMING     (FTSMC020_TPR_RBE       |       \
 296                                          FTSMC020_TPR_AST(1)    |       \
 297                                          FTSMC020_TPR_CTW(1)    |       \
 298                                          FTSMC020_TPR_ATI(1)    |       \
 299                                          FTSMC020_TPR_AT2(1)    |       \
 300                                          FTSMC020_TPR_WTC(1)    |       \
 301                                          FTSMC020_TPR_AHT(1)    |       \
 302                                          FTSMC020_TPR_TRNA(1))
 303 #endif
 304
 305 /*
 306  * FLASH on ADP_AG101P is connected to BANK0
 307  * Just disalbe the other BANK to avoid detection error.
 308  */
 309 #define FTSMC020_BANK0_CONFIG   (FTSMC020_BANK_ENABLE             |     \
 310                                  FTSMC020_BANK_BASE(PHYS_FLASH_1) |     \
 311                                  FTSMC020_BANK_SIZE_32M           |     \
 312                                  FTSMC020_BANK_MBW_32)
 313
 314 #define FTSMC020_BANK0_TIMING   (FTSMC020_TPR_AST(3)   |        \
 315                                  FTSMC020_TPR_CTW(3)   |        \
 316                                  FTSMC020_TPR_ATI(0xf) |        \
 317                                  FTSMC020_TPR_AT2(3)   |        \
 318                                  FTSMC020_TPR_WTC(3)   |        \
 319                                  FTSMC020_TPR_AHT(3)   |        \
 320                                  FTSMC020_TPR_TRNA(0xf))
 321
 322 #define FTSMC020_BANK1_CONFIG   (0x00)
 323 #define FTSMC020_BANK1_TIMING   (0x00)
 324 #endif /* CONFIG_FTSMC020 */
 325
 326 /*
 327  * FLASH and environment organization
 328  */
 329 /* use CFI framework */
 330 #define CONFIG_SYS_FLASH_CFI
 331 #define CONFIG_FLASH_CFI_DRIVER
 332
 333 #define CONFIG_SYS_FLASH_CFI_WIDTH      FLASH_CFI_16BIT
 334 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 335
 336 /* support JEDEC */
 337
 338 /* Do not use CONFIG_FLASH_CFI_LEGACY to detect on board flash */
 339 #ifdef CONFIG_SKIP_LOWLEVEL_INIT
 340 #define PHYS_FLASH_1                    0x80400000      /* BANK 1 */
 341 #else   /* !CONFIG_SKIP_LOWLEVEL_INIT */
 342 #ifdef CONFIG_MEM_REMAP
 343 #define PHYS_FLASH_1                    0x80000000      /* BANK 0 */
 344 #else
 345 #define PHYS_FLASH_1                    0x00000000      /* BANK 0 */
 346 #endif  /* CONFIG_MEM_REMAP */
 347 #endif  /* CONFIG_SKIP_LOWLEVEL_INIT */
 348
 349 #define CONFIG_SYS_FLASH_BASE           PHYS_FLASH_1
 350 #define CONFIG_SYS_FLASH_BANKS_LIST     { PHYS_FLASH_1, }
 351 #define CONFIG_SYS_MONITOR_BASE         PHYS_FLASH_1
 352
 353 #define CONFIG_SYS_FLASH_ERASE_TOUT     120000  /* TO for Flash Erase (ms) */
 354 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* TO for Flash Write (ms) */
 355
 356 /* max number of memory banks */
 357 /*
 358  * There are 4 banks supported for this Controller,
 359  * but we have only 1 bank connected to flash on board
 360  */
 361 #define CONFIG_SYS_MAX_FLASH_BANKS      1
 362
 363 /* max number of sectors on one chip */
 364 #define CONFIG_FLASH_SECTOR_SIZE        (0x10000*2*2)
 365 #define CONFIG_ENV_SECT_SIZE            CONFIG_FLASH_SECTOR_SIZE
 366 #define CONFIG_SYS_MAX_FLASH_SECT       128
 367
 368 /* environments */
 369 #define CONFIG_ENV_IS_IN_FLASH
 370 #define CONFIG_ENV_ADDR                 (CONFIG_SYS_MONITOR_BASE + 0x140000)
 371 #define CONFIG_ENV_SIZE                 8192
 372 #define CONFIG_ENV_OVERWRITE
 373
 374 #endif  /* __CONFIG_H */