include/configs/am3517_crane.h

   1 /*
   2  * am3517_crane.h - Default configuration for AM3517 CraneBoard.
   3  *
   4  * Author: Srinath.R <srinath@mistralsolutions.com>
   5  *
   6  * Based on include/configs/am3517evm.h
   7  *
   8  * Copyright (C) 2011 Mistral Solutions pvt Ltd
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 #ifndef __CONFIG_H
  14 #define __CONFIG_H
  15
  16 /*
  17  * High Level Configuration Options
  18  */
  19 #define CONFIG_OMAP             1       /* in a TI OMAP core */
  20 #define CONFIG_OMAP3_AM3517CRANE        1       /* working with CRANEBOARD */
  21 #define CONFIG_OMAP_COMMON
  22 /* Common ARM Erratas */
  23 #define CONFIG_ARM_ERRATA_454179
  24 #define CONFIG_ARM_ERRATA_430973
  25 #define CONFIG_ARM_ERRATA_621766
  26
  27 #define CONFIG_EMIF4    /* The chip has EMIF4 controller */
  28
  29 #include <asm/arch/cpu.h>               /* get chip and board defs */
  30 #include <asm/arch/omap.h>
  31
  32 /*
  33  * Display CPU and Board information
  34  */
  35 #define CONFIG_DISPLAY_CPUINFO          1
  36 #define CONFIG_DISPLAY_BOARDINFO        1
  37
  38 /* Clock Defines */
  39 #define V_OSCK                  26000000        /* Clock output from T2 */
  40 #define V_SCLK                  (V_OSCK >> 1)
  41
  42 #define CONFIG_MISC_INIT_R
  43
  44 #define CONFIG_CMDLINE_TAG              1       /* enable passing of ATAGs */
  45 #define CONFIG_SETUP_MEMORY_TAGS        1
  46 #define CONFIG_INITRD_TAG               1
  47 #define CONFIG_REVISION_TAG             1
  48
  49 /*
  50  * Size of malloc() pool
  51  */
  52 #define CONFIG_ENV_SIZE                 (128 << 10)     /* 128 KiB sector */
  53 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + (128 << 10))
  54                                                 /* initial data */
  55 /*
  56  * DDR related
  57  */
  58 #define CONFIG_SYS_CS0_SIZE             (256 * 1024 * 1024)
  59
  60 /*
  61  * Hardware drivers
  62  */
  63
  64 /*
  65  * NS16550 Configuration
  66  */
  67 #define V_NS16550_CLK                   48000000        /* 48MHz (APLL96/2) */
  68
  69 #define CONFIG_SYS_NS16550
  70 #define CONFIG_SYS_NS16550_SERIAL
  71 #define CONFIG_SYS_NS16550_REG_SIZE     (-4)
  72 #define CONFIG_SYS_NS16550_CLK          V_NS16550_CLK
  73
  74 /*
  75  * select serial console configuration
  76  */
  77 #define CONFIG_CONS_INDEX               3
  78 #define CONFIG_SYS_NS16550_COM3         OMAP34XX_UART3
  79 #define CONFIG_SERIAL3                  3       /* UART3 on CRANEBOARD */
  80
  81 /* allow to overwrite serial and ethaddr */
  82 #define CONFIG_ENV_OVERWRITE
  83 #define CONFIG_BAUDRATE                 115200
  84 #define CONFIG_SYS_BAUDRATE_TABLE       {4800, 9600, 19200, 38400, 57600,\
  85                                         115200}
  86 #define CONFIG_GENERIC_MMC              1
  87 #define CONFIG_MMC                      1
  88 #define CONFIG_OMAP_HSMMC               1
  89 #define CONFIG_DOS_PARTITION            1
  90
  91 /*
  92  * USB configuration
  93  * Enable CONFIG_MUSB_HCD for Host functionalities MSC, keyboard
  94  * Enable CONFIG_MUSB_UDC for Device functionalities.
  95  */
  96 #define CONFIG_USB_AM35X                1
  97 #define CONFIG_MUSB_HCD                 1
  98
  99 #ifdef CONFIG_USB_AM35X
 100
 101 #ifdef CONFIG_MUSB_HCD
 102 #define CONFIG_CMD_USB
 103
 104 #define CONFIG_USB_STORAGE
 105 #define CONGIG_CMD_STORAGE
 106 #define CONFIG_CMD_FAT
 107
 108 #ifdef CONFIG_USB_KEYBOARD
 109 #define CONFIG_SYS_USB_EVENT_POLL
 110 #define CONFIG_PREBOOT "usb start"
 111 #endif /* CONFIG_USB_KEYBOARD */
 112
 113 #endif /* CONFIG_MUSB_HCD */
 114
 115 #ifdef CONFIG_MUSB_UDC
 116 /* USB device configuration */
 117 #define CONFIG_USB_DEVICE               1
 118 #define CONFIG_USB_TTY                  1
 119 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    1
 120 /* Change these to suit your needs */
 121 #define CONFIG_USBD_VENDORID            0x0451
 122 #define CONFIG_USBD_PRODUCTID           0x5678
 123 #define CONFIG_USBD_MANUFACTURER        "Texas Instruments"
 124 #define CONFIG_USBD_PRODUCT_NAME        "AM3517CRANE"
 125 #endif /* CONFIG_MUSB_UDC */
 126
 127 #endif /* CONFIG_USB_AM35X */
 128
 129 /* commands to include */
 130 #include <config_cmd_default.h>
 131
 132 #define CONFIG_CMD_EXT2         /* EXT2 Support                 */
 133 #define CONFIG_CMD_FAT          /* FAT support                  */
 134 #define CONFIG_CMD_JFFS2        /* JFFS2 Support                */
 135
 136 #define CONFIG_CMD_I2C          /* I2C serial bus support       */
 137 #define CONFIG_CMD_MMC          /* MMC support                  */
 138 #define CONFIG_CMD_NAND         /* NAND support                 */
 139 #define CONFIG_CMD_DHCP
 140 #undef CONFIG_CMD_PING
 141
 142 #undef CONFIG_CMD_FLASH         /* flinfo, erase, protect       */
 143 #undef CONFIG_CMD_FPGA          /* FPGA configuration Support   */
 144 #undef CONFIG_CMD_IMI           /* iminfo                       */
 145 #undef CONFIG_CMD_IMLS          /* List all found images        */
 146
 147 #define CONFIG_SYS_NO_FLASH
 148 #define CONFIG_SYS_I2C
 149 #define CONFIG_SYS_OMAP24_I2C_SPEED     100000
 150 #define CONFIG_SYS_OMAP24_I2C_SLAVE     1
 151 #define CONFIG_SYS_I2C_OMAP34XX
 152
 153 #undef CONFIG_CMD_NFS
 154 /*
 155  * Board NAND Info.
 156  */
 157 #define CONFIG_SYS_NAND_ADDR            NAND_BASE       /* physical address */
 158                                                         /* to access nand */
 159 #define CONFIG_SYS_NAND_BASE            NAND_BASE       /* physical address */
 160                                                         /* to access */
 161                                                         /* nand at CS0 */
 162
 163 #define CONFIG_SYS_MAX_NAND_DEVICE      1               /* Max number of */
 164                                                         /* NAND devices */
 165
 166 #define CONFIG_JFFS2_NAND
 167 /* nand device jffs2 lives on */
 168 #define CONFIG_JFFS2_DEV                "nand0"
 169 /* start of jffs2 partition */
 170 #define CONFIG_JFFS2_PART_OFFSET        0x680000
 171 #define CONFIG_JFFS2_PART_SIZE          0xf980000       /* sz of jffs2 part */
 172
 173 /* Environment information */
 174 #define CONFIG_BOOTDELAY        10
 175
 176 #define CONFIG_BOOTFILE         "uImage"
 177
 178 #define CONFIG_EXTRA_ENV_SETTINGS \
 179         "loadaddr=0x82000000\0" \
 180         "console=ttyS2,115200n8\0" \
 181         "mmcdev=0\0" \
 182         "mmcargs=setenv bootargs console=${console} " \
 183                 "root=/dev/mmcblk0p2 rw " \
 184                 "rootfstype=ext3 rootwait\0" \
 185         "nandargs=setenv bootargs console=${console} " \
 186                 "root=/dev/mtdblock4 rw " \
 187                 "rootfstype=jffs2\0" \
 188         "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
 189         "bootscript=echo Running bootscript from mmc ...; " \
 190                 "source ${loadaddr}\0" \
 191         "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
 192         "mmcboot=echo Booting from mmc ...; " \
 193                 "run mmcargs; " \
 194                 "bootm ${loadaddr}\0" \
 195         "nandboot=echo Booting from nand ...; " \
 196                 "run nandargs; " \
 197                 "nand read ${loadaddr} 280000 400000; " \
 198                 "bootm ${loadaddr}\0" \
 199
 200 #define CONFIG_BOOTCOMMAND \
 201         "mmc dev ${mmcdev}; if mmc rescan; then " \
 202                 "if run loadbootscript; then " \
 203                         "run bootscript; " \
 204                 "else " \
 205                         "if run loaduimage; then " \
 206                                 "run mmcboot; " \
 207                         "else run nandboot; " \
 208                         "fi; " \
 209                 "fi; " \
 210         "else run nandboot; fi"
 211
 212 #define CONFIG_AUTO_COMPLETE    1
 213 /*
 214  * Miscellaneous configurable options
 215  */
 216 #define V_PROMPT                        "AM3517_CRANE # "
 217
 218 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 219 #define CONFIG_SYS_HUSH_PARSER          /* use "hush" command parser */
 220 #define CONFIG_SYS_PROMPT               V_PROMPT
 221 #define CONFIG_SYS_CBSIZE               512     /* Console I/O Buffer Size */
 222 /* Print Buffer Size */
 223 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 224                                         sizeof(CONFIG_SYS_PROMPT) + 16)
 225 #define CONFIG_SYS_MAXARGS              32      /* max number of command */
 226                                                 /* args */
 227 /* Boot Argument Buffer Size */
 228 #define CONFIG_SYS_BARGSIZE             (CONFIG_SYS_CBSIZE)
 229 /* memtest works on */
 230 #define CONFIG_SYS_MEMTEST_START        (OMAP34XX_SDRC_CS0)
 231 #define CONFIG_SYS_MEMTEST_END          (OMAP34XX_SDRC_CS0 + \
 232                                         0x01F00000) /* 31MB */
 233
 234 #define CONFIG_SYS_LOAD_ADDR            (OMAP34XX_SDRC_CS0) /* default load */
 235                                                                 /* address */
 236
 237 /*
 238  * AM3517 has 12 GP timers, they can be driven by the system clock
 239  * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
 240  * This rate is divided by a local divisor.
 241  */
 242 #define CONFIG_SYS_TIMERBASE            OMAP34XX_GPT2
 243 #define CONFIG_SYS_PTV                  2       /* Divisor: 2^(PTV+1) => 8 */
 244
 245 /*-----------------------------------------------------------------------
 246  * Physical Memory Map
 247  */
 248 #define CONFIG_NR_DRAM_BANKS    2       /* CS1 may or may not be populated */
 249 #define PHYS_SDRAM_1            OMAP34XX_SDRC_CS0
 250 #define PHYS_SDRAM_2            OMAP34XX_SDRC_CS1
 251
 252 /*-----------------------------------------------------------------------
 253  * FLASH and environment organization
 254  */
 255
 256 /* **** PISMO SUPPORT *** */
 257 #define CONFIG_SYS_MAX_FLASH_SECT       520     /* max number of sectors */
 258                                                 /* on one chip */
 259 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* max number of flash banks */
 260 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 2 sectors */
 261
 262 #define CONFIG_SYS_FLASH_BASE           NAND_BASE
 263
 264 /* Monitor at start of flash */
 265 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_FLASH_BASE
 266
 267 #define CONFIG_NAND_OMAP_GPMC
 268 #define CONFIG_ENV_IS_IN_NAND           1
 269 #define SMNAND_ENV_OFFSET               0x260000 /* environment starts here */
 270
 271 #define CONFIG_SYS_ENV_SECT_SIZE        (128 << 10)     /* 128 KiB sector */
 272 #define CONFIG_ENV_OFFSET               SMNAND_ENV_OFFSET
 273 #define CONFIG_ENV_ADDR                 SMNAND_ENV_OFFSET
 274
 275 /*-----------------------------------------------------------------------
 276  * CFI FLASH driver setup
 277  */
 278 /* timeout values are in ticks */
 279 #define CONFIG_SYS_FLASH_ERASE_TOUT     (100 * CONFIG_SYS_HZ)
 280 #define CONFIG_SYS_FLASH_WRITE_TOUT     (100 * CONFIG_SYS_HZ)
 281
 282 /* Flash banks JFFS2 should use */
 283 #define CONFIG_SYS_MAX_MTD_BANKS        (CONFIG_SYS_MAX_FLASH_BANKS + \
 284                                         CONFIG_SYS_MAX_NAND_DEVICE)
 285 #define CONFIG_SYS_JFFS2_MEM_NAND
 286 /* use flash_info[2] */
 287 #define CONFIG_SYS_JFFS2_FIRST_BANK     CONFIG_SYS_MAX_FLASH_BANKS
 288 #define CONFIG_SYS_JFFS2_NUM_BANKS      1
 289
 290 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
 291 #define CONFIG_SYS_INIT_RAM_ADDR        0x4020f800
 292 #define CONFIG_SYS_INIT_RAM_SIZE        0x800
 293 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_INIT_RAM_ADDR + \
 294                                          CONFIG_SYS_INIT_RAM_SIZE - \
 295                                          GENERATED_GBL_DATA_SIZE)
 296
 297 /* Defines for SPL */
 298 #define CONFIG_SPL_FRAMEWORK
 299 #define CONFIG_SPL_BOARD_INIT
 300 #define CONFIG_SPL_NAND_SIMPLE
 301 #define CONFIG_SPL_TEXT_BASE            0x40200800
 302 #define CONFIG_SPL_MAX_SIZE             (54 * 1024)     /* 8 KB for stack */
 303
 304 #define CONFIG_SPL_BSS_START_ADDR       0x80000000
 305 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000         /* 512 KB */
 306
 307 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
 308 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS      0x200 /* 256 KB */
 309 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION      1
 310 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
 311
 312 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 313 #define CONFIG_SPL_LIBDISK_SUPPORT
 314 #define CONFIG_SPL_I2C_SUPPORT
 315 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 316 #define CONFIG_SPL_MMC_SUPPORT
 317 #define CONFIG_SPL_FAT_SUPPORT
 318 #define CONFIG_SPL_SERIAL_SUPPORT
 319 #define CONFIG_SPL_NAND_SUPPORT
 320 #define CONFIG_SPL_NAND_BASE
 321 #define CONFIG_SPL_NAND_DRIVERS
 322 #define CONFIG_SPL_NAND_ECC
 323 #define CONFIG_SPL_POWER_SUPPORT
 324 #define CONFIG_SPL_LDSCRIPT             "$(CPUDIR)/omap-common/u-boot-spl.lds"
 325
 326 /* NAND boot config */
 327 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT  16
 328 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 329 #define CONFIG_SYS_NAND_PAGE_COUNT      64
 330 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
 331 #define CONFIG_SYS_NAND_OOBSIZE         64
 332 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128*1024)
 333 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
 334 #define CONFIG_SYS_NAND_ECCPOS          {2, 3, 4, 5, 6, 7, 8, 9,\
 335                                                 10, 11, 12, 13}
 336 #define CONFIG_SYS_NAND_ECCSIZE         512
 337 #define CONFIG_SYS_NAND_ECCBYTES        3
 338 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_HAM1_CODE_HW
 339 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
 340 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x80000
 341
 342 /*
 343  * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
 344  * 64 bytes before this address should be set aside for u-boot.img's
 345  * header. That is 0x800FFFC0--0x80100000 should not be used for any
 346  * other needs.
 347  */
 348 #define CONFIG_SYS_TEXT_BASE            0x80100000
 349 #define CONFIG_SYS_SPL_MALLOC_START     0x80208000
 350 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000
 351
 352 #endif /* __CONFIG_H */