include/configs/am3517_evm.h

   1 /*
   2  * am3517_evm.h - Default configuration for AM3517 EVM board.
   3  *
   4  * Author: Vaibhav Hiremath <hvaibhav@ti.com>
   5  *
   6  * Based on omap3_evm_config.h
   7  *
   8  * Copyright (C) 2010 Texas Instruments Incorporated
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 #ifndef __CONFIG_H
  14 #define __CONFIG_H
  15
  16 #define CONFIG_NR_DRAM_BANKS    2       /* CS1 may or may not be populated */
  17
  18 /*
  19  * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
  20  * 64 bytes before this address should be set aside for u-boot.img's
  21  * header. That is 0x800FFFC0--0x80100000 should not be used for any
  22  * other needs.
  23  */
  24
  25 #define CONFIG_SYS_TEXT_BASE            0x80100000
  26 #define CONFIG_SYS_SPL_MALLOC_START     0x80208000
  27 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000
  28
  29 #include <configs/ti_omap3_common.h>
  30 #undef CONFIG_SDRC      /* Disable SDRC since we have EMIF4 */
  31
  32 #define CONFIG_MISC_INIT_R
  33 #define CONFIG_REVISION_TAG
  34
  35 /* Hardware drivers */
  36
  37 /* allow to overwrite serial and ethaddr */
  38 #define CONFIG_ENV_OVERWRITE
  39
  40 /*
  41  * USB configuration
  42  * Enable CONFIG_USB_MUSB_HOST for Host functionalities MSC, keyboard
  43  * Enable CONFIG_USB_MUSB_GADGET for Device functionalities.
  44  */
  45 #define CONFIG_USB_MUSB_AM35X
  46 #define CONFIG_USB_MUSB_PIO_ONLY
  47
  48 #ifdef CONFIG_USB_MUSB_AM35X
  49
  50 #ifdef CONFIG_USB_MUSB_HOST
  51
  52 #ifdef CONFIG_USB_KEYBOARD
  53 #define CONFIG_PREBOOT "usb start"
  54 #endif /* CONFIG_USB_KEYBOARD */
  55
  56 #endif /* CONFIG_USB_MUSB_HOST */
  57
  58 #ifdef CONFIG_USB_MUSB_GADGET
  59 #define CONFIG_USB_ETHER
  60 #define CONFIG_USB_ETH_RNDIS
  61 #endif /* CONFIG_USB_MUSB_GADGET */
  62
  63 #endif /* CONFIG_USB_MUSB_AM35X */
  64
  65 /* I2C */
  66 #define CONFIG_SYS_OMAP24_I2C_SPEED     100000
  67 #define CONFIG_SYS_OMAP24_I2C_SLAVE     1
  68
  69 /* Ethernet */
  70 #define CONFIG_DRIVER_TI_EMAC
  71 #define CONFIG_DRIVER_TI_EMAC_USE_RMII
  72 #define CONFIG_MII
  73 #define CONFIG_BOOTP_DEFAULT
  74 #define CONFIG_BOOTP_DNS
  75 #define CONFIG_BOOTP_DNS2
  76 #define CONFIG_BOOTP_SEND_HOSTNAME
  77 #define CONFIG_NET_RETRY_COUNT          10
  78
  79 /* Board NAND Info. */
  80 #ifdef CONFIG_NAND
  81 #define CONFIG_NAND_OMAP_GPMC_PREFETCH
  82 #define CONFIG_SYS_NAND_ADDR            NAND_BASE       /* physical address */
  83                                                         /* to access nand */
  84 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT
  85 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
  86 #define CONFIG_SYS_NAND_PAGE_COUNT      64
  87 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
  88 #define CONFIG_SYS_NAND_OOBSIZE         64
  89 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
  90 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
  91 #define CONFIG_SYS_NAND_ECCPOS          { 2,  3,  4,  5,  6,  7,  8,  9, 10, \
  92                                          11, 12, 13, 14, 16, 17, 18, 19, 20, \
  93                                          21, 22, 23, 24, 25, 26, 27, 28, 30, \
  94                                          31, 32, 33, 34, 35, 36, 37, 38, 39, \
  95                                          40, 41, 42, 44, 45, 46, 47, 48, 49, \
  96                                          50, 51, 52, 53, 54, 55, 56 }
  97
  98 #define CONFIG_SYS_NAND_ECCSIZE         512
  99 #define CONFIG_SYS_NAND_ECCBYTES        13
 100 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
 101 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
 102 #define CONFIG_SYS_NAND_MAX_ECCPOS      56
 103 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
 104 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x80000
 105 #define CONFIG_MTD_PARTITIONS           /* required for UBI partition support */
 106 #define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */
 107 /* NAND block size is 128 KiB.  Synchronize these values with
 108  * corresponding Device Tree entries in Linux:
 109  *  MLO(SPL)             4 * NAND_BLOCK_SIZE = 512 KiB  @ 0x000000
 110  *  U-Boot              15 * NAND_BLOCK_SIZE = 1920 KiB @ 0x080000
 111  *  U-Boot environment   2 * NAND_BLOCK_SIZE = 256 KiB  @ 0x260000
 112  *  Kernel              64 * NAND_BLOCK_SIZE = 8 MiB    @ 0x2A0000
 113  *  DTB                  4 * NAND_BLOCK_SIZE = 512 KiB  @ 0xAA0000
 114  *  RootFS              Remaining Flash Space           @ 0xB20000
 115  */
 116 #define MTDIDS_DEFAULT "nand0=omap2-nand.0"
 117 #define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:"       \
 118         "512k(MLO),"                                    \
 119         "1920k(u-boot),"                                \
 120         "256k(u-boot-env),"                             \
 121         "8m(kernel),"                                   \
 122         "512k(dtb),"                                    \
 123         "-(rootfs)"
 124 #else
 125 #define MTDIDS_DEFAULT
 126 #define MTDPARTS_DEFAULT
 127 #endif /* CONFIG_NAND */
 128
 129 /* Environment information */
 130
 131 #define CONFIG_BOOTFILE         "uImage"
 132
 133 #define CONFIG_EXTRA_ENV_SETTINGS \
 134         "loadaddr=0x82000000\0" \
 135         "console=ttyO2,115200n8\0" \
 136         "fdtfile=am3517-evm.dtb\0" \
 137         "fdtaddr=0x82C00000\0" \
 138         "vram=16M\0" \
 139         "bootenv=uEnv.txt\0" \
 140         "cmdline=\0" \
 141         "optargs=\0" \
 142         "mtdids=" MTDIDS_DEFAULT "\0" \
 143         "mtdparts=" MTDPARTS_DEFAULT "\0" \
 144         "mmcdev=0\0" \
 145         "mmcpart=1\0" \
 146         "mmcroot=/dev/mmcblk0p2 rw\0" \
 147         "mmcrootfstype=ext4 rootwait fixrtc\0" \
 148         "mmcargs=setenv bootargs console=${console} " \
 149                 "${mtdparts} " \
 150                 "${optargs} " \
 151                 "root=${mmcroot} " \
 152                 "rootfstype=${mmcrootfstype} " \
 153                 "${cmdline}\0" \
 154         "nandargs=setenv bootargs console=${console} " \
 155                 "${mtdparts} " \
 156                 "${optargs} " \
 157                 "root=ubi0:rootfs rw ubi.mtd=rootfs " \
 158                 "rootfstype=ubifs rootwait " \
 159                 "${cmdline}\0" \
 160         "loadbootenv=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${bootenv}\0"\
 161         "importbootenv=echo Importing environment from mmc ...; " \
 162                 "env import -t ${loadaddr} ${filesize}\0" \
 163         "bootscript=echo Running bootscript from mmc ...; " \
 164                 "source ${loadaddr}\0" \
 165         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${bootfile}\0" \
 166         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdtaddr} ${fdtfile}\0" \
 167         "mmcboot=echo Booting from mmc ...; " \
 168                 "run mmcargs; " \
 169                 "bootz ${loadaddr} - ${fdtaddr}\0" \
 170         "nandboot=echo Booting from nand ...; " \
 171                 "run nandargs; " \
 172                 "nand read ${loadaddr} 2a0000 800000; " \
 173                 "nand read ${fdtaddr} aa0000 80000; " \
 174                 "bootm ${loadaddr} - ${fdtaddr}\0" \
 175
 176 #define CONFIG_BOOTCOMMAND \
 177         "mmc dev ${mmcdev}; if mmc rescan; then " \
 178                 "echo SD/MMC found on device $mmcdev; " \
 179                 "if run loadbootenv; then " \
 180                         "run importbootenv; " \
 181                 "fi; " \
 182                 "echo Checking if uenvcmd is set ...; " \
 183                 "if test -n $uenvcmd; then " \
 184                         "echo Running uenvcmd ...; " \
 185                         "run uenvcmd; " \
 186                 "fi; " \
 187                 "echo Running default loadimage ...; " \
 188                 "setenv bootfile zImage; " \
 189                 "if run loadimage; then " \
 190                         "run loadfdt; " \
 191                         "run mmcboot; " \
 192                 "fi; " \
 193         "else run nandboot; fi"
 194
 195 /* Miscellaneous configurable options */
 196 #define CONFIG_AUTO_COMPLETE
 197 #define CONFIG_CMDLINE_EDITING
 198 #define CONFIG_SYS_LONGHELP
 199
 200 /* We set the max number of command args high to avoid HUSH bugs. */
 201 #define CONFIG_SYS_MAXARGS              64
 202
 203 /* Print Buffer Size */
 204 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE \
 205                                         + sizeof(CONFIG_SYS_PROMPT) + 16)
 206 /* Boot Argument Buffer Size */
 207 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 208
 209 /* memtest works on */
 210 #define CONFIG_SYS_MEMTEST_START        (OMAP34XX_SDRC_CS0)
 211 #define CONFIG_SYS_MEMTEST_END          (OMAP34XX_SDRC_CS0 + \
 212                                         0x01F00000) /* 31MB */
 213
 214 /* Physical Memory Map */
 215 #define CONFIG_SYS_CS0_SIZE             (256 * 1024 * 1024)
 216 #define CONFIG_SYS_INIT_RAM_ADDR        0x4020f800
 217 #define CONFIG_SYS_INIT_RAM_SIZE        0x800
 218
 219 /* FLASH and environment organization */
 220
 221 /* **** PISMO SUPPORT *** */
 222 #define CONFIG_SYS_MAX_FLASH_SECT       520     /* max number of sectors */
 223                                                 /* on one chip */
 224 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* max number of flash banks */
 225 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 2 sectors */
 226
 227 #if defined(CONFIG_NAND)
 228 #define CONFIG_SYS_FLASH_BASE           NAND_BASE
 229 #endif
 230
 231 /* Monitor at start of flash */
 232 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_FLASH_BASE
 233
 234 #define CONFIG_SYS_ENV_SECT_SIZE        (128 << 10)     /* 128 KiB */
 235 #define CONFIG_ENV_SIZE                 CONFIG_SYS_ENV_SECT_SIZE
 236 #define CONFIG_ENV_OFFSET               0x260000
 237 #define CONFIG_ENV_ADDR                 0x260000
 238
 239 /* Defines for SPL */
 240 #define CONFIG_SPL_FRAMEWORK
 241 #undef CONFIG_SPL_TEXT_BASE
 242 #define CONFIG_SPL_TEXT_BASE            0x40200000
 243
 244 #undef CONFIG_SPL_BSS_START_ADDR
 245 #define CONFIG_SPL_BSS_START_ADDR       0x80000000
 246 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000         /* 512 KB */
 247
 248 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION      1
 249 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME         "u-boot.img"
 250
 251 #define CONFIG_SPL_NAND_BASE
 252 #define CONFIG_SPL_NAND_DRIVERS
 253 #define CONFIG_SPL_NAND_ECC
 254
 255 #endif /* __CONFIG_H */