include/configs/amcc-common.h

   1 /*
   2  * (C) Copyright 2008, 2009
   3  * Stefan Roese, DENX Software Engineering, sr@denx.de.
   4  *
   5  * Common configuration options for all AMCC boards
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 #ifndef __AMCC_COMMON_H
  11 #define __AMCC_COMMON_H
  12
  13 #define CONFIG_SYS_SDRAM_BASE           0x00000000      /* _must_ be 0          */
  14 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* Start of U-Boot      */
  15 #define CONFIG_SYS_MONITOR_LEN          (0xFFFFFFFF - CONFIG_SYS_MONITOR_BASE + 1)
  16 #define CONFIG_SYS_MALLOC_LEN           (1 << 20)       /* Reserved for malloc  */
  17
  18 /*
  19  * UART
  20  */
  21 #define CONFIG_SYS_NS16550_SERIAL
  22 #ifndef CONFIG_DM_SERIAL
  23 #define CONFIG_SYS_NS16550_REG_SIZE     1
  24 #define CONFIG_SYS_NS16550_CLK          get_serial_clock()
  25 #endif
  26 #define CONFIG_BAUDRATE         115200
  27 #define CONFIG_SYS_BAUDRATE_TABLE  \
  28     {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
  29
  30 /*
  31  * I2C
  32  */
  33 #define CONFIG_SYS_I2C
  34 #define CONFIG_SYS_I2C_PPC4XX
  35 #define CONFIG_SYS_I2C_PPC4XX_CH0
  36 #define CONFIG_SYS_I2C_PPC4XX_SLAVE_0           0x7F
  37
  38 /*
  39  * Ethernet/EMAC/PHY
  40  */
  41 #define CONFIG_PPC4xx_EMAC
  42 #define CONFIG_MII                      /* MII PHY management           */
  43 #define CONFIG_NETCONSOLE               /* include NetConsole support   */
  44 #if defined(CONFIG_440)
  45 #define CONFIG_SYS_RX_ETH_BUFFER        32      /* number of eth rx buffers     */
  46 #else
  47 #define CONFIG_SYS_RX_ETH_BUFFER        16      /* number of eth rx buffers     */
  48 #endif
  49
  50 /*
  51  * Commands
  52  */
  53 #if defined(CONFIG_440)
  54 #endif
  55 #define CONFIG_CMD_DIAG
  56 #define CONFIG_CMD_EEPROM
  57 #define CONFIG_CMD_IRQ
  58 #define CONFIG_CMD_REGINFO
  59
  60 /*
  61  * Miscellaneous configurable options
  62  */
  63 #if defined(CONFIG_CMD_KGDB)
  64 #define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size      */
  65 #else
  66 #define CONFIG_SYS_CBSIZE               256     /* Console I/O Buffer Size      */
  67 #endif
  68 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
  69 #define CONFIG_SYS_MAXARGS              16      /* max number of command args   */
  70 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size  */
  71
  72 #define CONFIG_SYS_MEMTEST_START        0x0400000 /* memtest works on           */
  73 #define CONFIG_SYS_MEMTEST_END          0x0C00000 /* 4 ... 12 MB in DRAM        */
  74
  75 #define CONFIG_SYS_LOAD_ADDR            0x100000  /* default load address       */
  76 #define CONFIG_SYS_EXTBDINFO                    /* To use extended board_into (bd_t) */
  77
  78 #define CONFIG_CMDLINE_EDITING          /* add command line history     */
  79 #define CONFIG_AUTO_COMPLETE            /* add autocompletion support   */
  80 #define CONFIG_MX_CYCLIC                /* enable mdc/mwc commands      */
  81 #define CONFIG_ZERO_BOOTDELAY_CHECK     /* check for keypress on bootdelay==0 */
  82 #define CONFIG_VERSION_VARIABLE         /* include version env variable */
  83 #define CONFIG_SYS_CONSOLE_INFO_QUIET   /* don't print console @ startup*/
  84
  85 #define CONFIG_LOADS_ECHO               /* echo on for serial download  */
  86 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change        */
  87
  88 /*
  89  * BOOTP options
  90  */
  91 #define CONFIG_BOOTP_BOOTFILESIZE
  92 #define CONFIG_BOOTP_BOOTPATH
  93 #define CONFIG_BOOTP_GATEWAY
  94 #define CONFIG_BOOTP_HOSTNAME
  95 #define CONFIG_BOOTP_SUBNETMASK
  96
  97 /*
  98  * For booting Linux, the board info and command line data
  99  * have to be in the first 16 MB of memory, since this is
 100  * the maximum mapped by the 40x Linux kernel during initialization.
 101  */
 102 #define CONFIG_SYS_BOOTMAPSZ            (16 << 20) /* Initial Memory map for Linux */
 103 #define CONFIG_SYS_BOOTM_LEN            (16 << 20) /* Increase max gunzip size */
 104
 105 /*
 106  * Internal Definitions
 107  */
 108 #if defined(CONFIG_CMD_KGDB)
 109 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port*/
 110 #endif
 111
 112 /* Update size in "reg" property of NOR FLASH device tree nodes */
 113 #define CONFIG_FDT_FIXUP_NOR_FLASH_SIZE
 114
 115 /*
 116  * Booting and default environment
 117  */
 118 #define CONFIG_PREBOOT  "echo;" \
 119         "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
 120         "echo"
 121 #define CONFIG_BOOTCOMMAND      "run flash_self"
 122
 123 /*
 124  * Only very few boards have default console not on ttyS0 (like Taishan)
 125  */
 126 #if !defined(CONFIG_USE_TTY)
 127 #define CONFIG_USE_TTY  ttyS0
 128 #endif
 129
 130 /*
 131  * Only very few boards have default netdev not set to eth0 (like Arches)
 132  */
 133 #if !defined(CONFIG_USE_NETDEV)
 134 #define CONFIG_USE_NETDEV       eth0
 135 #endif
 136
 137 /*
 138  * Only some 4xx PPC's are equipped with an FPU
 139  */
 140 #if defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \
 141     defined(CONFIG_460EX) || defined(CONFIG_460GT)
 142 #define CONFIG_AMCC_DEF_ENV_ROOTPATH    "rootpath=/opt/eldk/ppc_4xxFP\0"
 143 #else
 144 #define CONFIG_AMCC_DEF_ENV_ROOTPATH    "rootpath=/opt/eldk/ppc_4xx\0"
 145 #endif
 146
 147 /*
 148  * Only some boards need to extend the bootargs by some additional
 149  * parameters (like Makalu)
 150  */
 151 #if !defined(CONFIG_ADDMISC)
 152 #define CONFIG_ADDMISC  "addmisc=setenv bootargs ${bootargs}\0"
 153 #endif
 154
 155 /*
 156  * General common environment variables shared on all AMCC eval boards
 157  */
 158 #define CONFIG_AMCC_DEF_ENV                                             \
 159         "netdev=" __stringify(CONFIG_USE_NETDEV) "\0"                           \
 160         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
 161                 "nfsroot=${serverip}:${rootpath}\0"                     \
 162         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
 163         "addip=setenv bootargs ${bootargs} "                            \
 164                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
 165                 ":${hostname}:${netdev}:off panic=1\0"                  \
 166         "addtty=setenv bootargs ${bootargs}"                            \
 167                 " console=" __stringify(CONFIG_USE_TTY) ",${baudrate}\0"        \
 168         CONFIG_ADDMISC                                                  \
 169         "initrd_high=30000000\0"                                        \
 170         "kernel_addr_r=1000000\0"                                       \
 171         "fdt_addr_r=1800000\0"                                          \
 172         "ramdisk_addr_r=1900000\0"                                      \
 173         "hostname=" __stringify(CONFIG_HOSTNAME) "\0"                           \
 174         "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0"                    \
 175         "ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/uRamdisk\0"              \
 176         CONFIG_AMCC_DEF_ENV_ROOTPATH
 177
 178 /*
 179  * Default environment for arch/powerpc booting
 180  * for boards that are ported to arch/powerpc
 181  */
 182 #define CONFIG_AMCC_DEF_ENV_POWERPC                                     \
 183         "flash_self=run ramargs addip addtty addmisc;"                  \
 184                 "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0"    \
 185         "flash_nfs=run nfsargs addip addtty addmisc;"                   \
 186                 "bootm ${kernel_addr} - ${fdt_addr}\0"                  \
 187         "net_nfs=tftp ${kernel_addr_r} ${bootfile}; "                   \
 188                 "tftp ${fdt_addr_r} ${fdt_file}; "                      \
 189                 "run nfsargs addip addtty addmisc;"                     \
 190                 "bootm ${kernel_addr_r} - ${fdt_addr_r}\0"              \
 191         "net_self_load=tftp ${kernel_addr_r} ${bootfile};"              \
 192                 "tftp ${fdt_addr_r} ${fdt_file};"                       \
 193                 "tftp ${ramdisk_addr_r} ${ramdisk_file};\0"             \
 194         "net_self=run net_self_load;"                                   \
 195                 "run ramargs addip addtty addmisc;"                     \
 196                 "bootm ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}\0" \
 197         "fdt_file=" __stringify(CONFIG_HOSTNAME) "/" __stringify(CONFIG_HOSTNAME) ".dtb\0"
 198
 199 /*
 200  * Default environment for arch/ppc booting,
 201  * for boards that are not ported to arch/powerpc yet
 202  */
 203 #define CONFIG_AMCC_DEF_ENV_PPC                                         \
 204         "flash_self=run ramargs addip addtty addmisc;"                  \
 205                 "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
 206         "flash_nfs=run nfsargs addip addtty addmisc;"                   \
 207                 "bootm ${kernel_addr}\0"                                \
 208         "net_nfs=tftp ${kernel_addr_r} ${bootfile};"                    \
 209                 "run nfsargs addip addtty addmisc;"                     \
 210                 "bootm ${kernel_addr_r}\0"
 211
 212 /*
 213  * Default environment for arch/ppc booting (old version),
 214  * for boards that are ported to arch/ppc and arch/powerpc
 215  */
 216 #define CONFIG_AMCC_DEF_ENV_PPC_OLD                                     \
 217         "flash_self_old=run ramargs addip addtty addmisc;"              \
 218                 "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
 219         "flash_nfs_old=run nfsargs addip addtty addmisc;"               \
 220                 "bootm ${kernel_addr}\0"                                \
 221         "net_nfs_old=tftp ${kernel_addr_r} ${bootfile};"                \
 222                 "run nfsargs addip addtty addmisc;"                     \
 223                 "bootm ${kernel_addr_r}\0"
 224
 225 #define CONFIG_AMCC_DEF_ENV_NOR_UPD                                     \
 226         "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0"          \
 227         "load=tftp 200000 ${u-boot}\0"                                  \
 228         "update=protect off " __stringify(CONFIG_SYS_MONITOR_BASE) " FFFFFFFF;" \
 229                 "era " __stringify(CONFIG_SYS_MONITOR_BASE) " FFFFFFFF;"        \
 230                 "cp.b ${fileaddr} " __stringify(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0" \
 231         "upd=run load update\0"                                         \
 232
 233 #endif /* __AMCC_COMMON_H */